Advanced Power Electronics Corp. APE8862 600mA LOW DROPOUT LINEAR REGULATOR FEATURES DESCRIPTIOON Application for Extreme Low 1.0 & 1.2V Output Voltage Guaranteed 600mA Output Current Very Low Quiescent Current at about 30uA 2% Output Voltage Accuracy for 1V~3.3V Needs Only 1F Capacitor for Stability Thermal Shutdown Protection Current Limit Protection Low-ESR Ceramic Capacitor for Output Stability. Tiny SOT-23-5L & SC-70-5L, SOT-223, SOT-89(R) & TO-252 Package type RoHS Compliant & Halogen Free High PSRR The APE8862 series are low dropout, positive linear regulators with very low quiescent current. The APE8862 can supply 600mA output current with a low dropout voltage & very low output voltage. The APE8862 regulator is able to operate with output capacitors as small as 1F for stability. Other than the current limit protection APE8862 also offers on chip thermal shutdown feature providing protection against overload or any condition when the ambient temperature exceeds the junction temperature. The APE8862 series are offering several fixed output voltage types including 1.0V ~ 1.5V. The APE8862 series are available in low-profile, spacesaving SOT-23-5L, SC-70-5L, SOT-223, SOT-89(R) & TO252 packages. APPLICATIONS DVD/CD-ROMs, CD/RWs Wireless Devices LCD Modules Battery Power Systems Card Readers XDSL Routers TYPICAL APPLICATION Figure 1. Typical Application Circuit of APE8862 Note : To prevent oscillation, it is recommended to use minimum 1uF X7R or X5R dielectric capacitors if ceramics are used as input / output capacitors. PACKAGE ODERING INFORMATION APE8862X-XX Package Type Y5 : SOT-23-5L U5 : SC-70-5L K : SOT-223 G/GR : SOT-89 H : TO-252 Vout 10 : 1.0V 12 : 1.2V 15 : 1.5V 18 : 1.8V 25 : 2.5V 28 : 2.8V 30 : 3.0V 33 : 3.3V Data and specifications subject to change without notice 1 200908264 Advanced Power Electronics Corp. APE8862 ABSOLUTE MAXIMUM RATINGS Input Voltage (VIN) ----------------------------------------- 6V Power Dissipation (SOT-23-5L) ------------------------- 0.4W (SC-70-5L) ----------------------------- 0.16W (SOT-89) ------------------------------- 0.57W (SOT-223) ------------------------------ 0.74W (TO-252) -------------------------------- 1.42W Storage Temperature Range ---------------------------- -65C To 150C Maximum Junction Temperature ----------------------- 150C RECOMMENDED OPERATING CONDITIONS Input Voltage (VIN) ----------------------------------------- 2.8 to 5.5V Operating Junction Temperature Range (T J) ------- -40 to 125 Ambient Temperature (T A) ------------------------------- -40 to 85 PACKAGE INFORMATION Top View BP VOUT Tab is VIN Tab is GND SOT-89 (G) SOT-89 (GR) Top View BP VOUT SOT-23-5L SC-70-5L 1 2 3 1 2 Tab is VOUT Tab is GND TO-252 SOT-223 1 3 2 1 3 3 2 VOUT VIN GND SHDN VIN GND SHDN Rthja=250oC/W Rthja=600oC/W GND VIN VOUT Rthja=175oC/W VOUT GND VIN Rthja=175oC/W VOUT GND VIN Rthja=135oC/W GND VIN Rthja=70oC/W ELECTRICAL SPECIFICATIONS ( VIN=VOUT+1V or VIN=2.8V whichever is greater, C IN=1uF, COUT=1uF, TA=25, unless otherwise specified) Parameter SYM Output Voltage Accuracy VOUT IO= 1mA -2 ILIMIT RLoad=1 600 IQ IO= 0mA Current Limit Quiescent Current TEST CONDITION MIN TYP 2 650 30 50 1350 IO=600mA, VO=1V 1350 1500 1 5 mV 100 mV Line Regulation VLINE Load Regulation (Note 2) VLOAD IO=0mA to 600mA 50 Ripple Rejection PSRR Io=1mA, COUT=1uF, fRIPPLE = 1KHz -60 f RIPPLE = 10KHz -40 Thermal Shutdown Hysteresis Shutdown Pin Current % mA 1200 VDROP Thermal Shutdown Temperature UNITS IO=100mA, VO=1V Dropout Voltage (Note 1) Temperature Coefficient MAX IO=1mA, VIN=VOUT +1.5V to 5V mV dB 50 ppm/ C TSD 160 C TSD 25 C TC IOUT = 1mA, VIN = 5V A ISHDN Shutdown Pin Voltage (ON) VSHDN(ON) Shutdown Pin Voltage (OFF) VSHDN(OFF) 0.1 A 0.4 V 1.4 V Note 1The dropout voltage is defined as V IN-VOUT, which is measured when VOUT drop about 100mV. Note 2Regulation is measured at a constant junction temperature by using 30ms current pulse and load regulation in the load range from 0mA to 600mA. 2 Advanced Power Electronics Corp. APE8862 PIN DESCRIPTIONS PIN SYMBOL PIN DESCRIPTION VIN Power is supplied to this device from this pin which is required an input filter capacitor. In general, the input capacitor in the range of 1F to 10F is sufficient. The output supplies power to loads. The output capacitor is required to prevent output voltage unstable. The VOUT APE8862 is stable with an output capacitor 1F or greater. The larger output capacitor will be required for application with large transit load to limit peak voltage transits, besides could reduce output noise, improve stability, PSRR. GND BP SHDN Common ground pin Reference Noise Bypass ( the Bypass Capacitor > 1nF ) Chip Enable (Active High) BLOCK DIAGRAM Figure 3. Block Diagram of APE8862 3 Advanced Power Electronics Corp. APE8862 Application Information The APE8862 series are low dropout linear regulators that could provide 600mA output current at dropout voltage about 300mV. Besides, current limit and on chip thermal shutdown features provide protection against any combination of overload or ambient temperature that could exceed junction temperature. 1.Output and Input Capacitor The APE8862 regulator is designed to be stable with a wide range of output capacitors. The ESR of the output capacitor affects stability. Larger value of the output capacitor decreases the peak deviations and provides to improve transition response for larger current changes. The capacitor types (aluminum, ceramic, and tantalum) have different characterizations such as temperature and voltage coefficients. All ceramic capacitors are manufactured with a variety of dielectrics, each with different behavior across temperature and applications. Common dielectrics used are X5R, X7R and Y5V. It is recommended to use 1uF X5R or X7R dielectric ceramic capacitors with 30m to 50m ESR range between device outputs to ground for transient stability. The APE8862 is designed to be stable with low ESR ceramic capacitors and higher values of capacitors and ESR could improve output stability. So the ESR of output capacitor is very important because it generates a zero to provide phase lead for loop stability. There are no requirements for the ESR on the input capacitor, but its voltage and temperature coefficient have to be considered for device application environment. 2.Protection Features In order to prevent overloading or thermal condition from damaging the device, APE8862 regulator has internal thermal and current limiting functions designed to protect the device. It will rapidly shut off PMOS pass element during overloading or over temperature condition. 3.Thermal Consideration The power handling capability of the device will be limited by maximum operation junction temperature (125C). The power dissipated by the device will be estimated by PD = IOUT x (VIN-VOUT). The power dissipation should be lower than the maximum power dissipation listed in "Absolute Maximum Ratings" section. 4 ADVANCED POWER ELECTRONICS CORP. Package Outline : SOT-23-5L Millimeters SYMBOLS MIN NOM MAX A 1.00 1.10 1.30 A1 0.00 --- 0.10 A2 0.70 0.80 0.90 b 0.35 0.40 0.50 C 0.10 0.15 0.25 D 2.70 2.90 3.10 E 1.50 1.60 1.80 e --- 1.90(TYP) --- H 2.60 2.80 3.00 L 0.37 --- --- 1 1 5 9 e2 --- 0.95(TYP) --- Note 1Package Body Sizes Exclude Mold Flash Protrusions or Gate Burrs. Note 2Tolerance 0.1000 mm(4mil) Unless Otherwise Spe- cified. Note 3Coplanarity0.1000 mm Note 4Dimension L Is Measured in Gage plane. Part Marking Information & Packing : SOT-23 -5L Part : RT Vout : RT&XX A : 1.0V B : 1.2V C : 1.5V D : 1.8V F : 2.5V G : 2.8V H : 3.0V I : 3.3V Date Code 5 ADVANCED POWER ELECTRONICS CORP. Package Outline : SC-70-5L Millimeters b E1 SYMBOLS MIN NOM MAX A 0.80 __ 1.10 A1 0.00 __ 0.10 A2 0.70 0.90 1.00 b 0.25 0.30 0.40 b1 __ 0.38 __ C 0.10 __ 0.26 D 1.80 2.00 2.20 E1 1.15 1.25 1.35 E 1.80 2.10 2.40 e __ 1.30 __ L 0.15 0.30 0.45 L2 __ 0.15 y __ __ 0.10 0 __ 8 1 4 __ 12 E b1 C 1.All Dimension Are In Millimeters. 2.Dimension Does Not Include Mold Protrusions. Part Marking Information & Packing : SC-70-5L Part Number Vout. C&XX A : 1.0V B : 1.2V C : 1.5V D : 1.8V F : 2.5V G : 2.8V H : 3.0V I : 3.3V Date Code 6 ADVANCED POWER ELECTRONICS CORP. Package Outline & Packing : SOT-89 C J D B 2 1 Millimeters E 3 F I H K SYMBOLS MIN NOM MAX A 4.40 - 4.60 B 4.05 - 4.25 C 1.40 - 1.75 E 2.40 - 2.60 F 0.89 - 1.20 I 0.35 - 0.55 H ---- 1.50 ---- G ---- 3.00 ---- J 1.40 - 1.60 K 0.35 - 0.43 G 1.All Dimensions Are in Millimeters. A 2.Dimension Does Not Include Mold Protrusions. Part Marking Information : SOT-89 886X& YWWS Part Number : 8862G : 8862 8862GR : 886B Output Voltage A : 1.0V B : 1.2V C : 1.5V Date Code (YWWS) Y : Year WWWeek SSequence D : 1.8V F : 2.5V G : 2.8V H : 3.0V I : 3.3V 7 ADVANCED POWER ELECTRONICS CORP. Package Outline : SOT-223 C Millimeters A SYMBOLS MIN NOM MAX A B C 6.70 7.00 7.30 --- 2.3 --- 2.90 3.00 3.10 D 0.60 0.70 0.80 G 0.25 0.30 0.35 E 6.30 6.50 6.70 F 1.40 1.60 1.80 K 0.02 0.06 0.10 D B G E F K 1.All Dimension Are In Millimeters. 2.Dimension Does Not Include Mold Protrusions. Part Marking Information & Packing : SOT-223 Part Number 8862-XX YWWSSS Output Voltage : 10 : 1.0V 12 : 1.2V 15 : 1.5V 18 : 1.8V 25 : 2.5V 28 : 2.8V 30 : 3.0V 33 : 3.3V Date Code (YWWSSS) YLast Digit Of The Year WWWeek SSSSequence 8 ADVANCED POWER ELECTRONICS CORP. Package Outline : TO-252 D D1 E2 E3 B1 F1 e Millimeters SYMBOLS E1 MIN NOM MAX A2 1.80 2.30 2.80 A3 0.40 0.50 0.60 B1 0.40 0.70 1.00 D 6.00 6.50 7.00 D1 4.80 5.35 5.90 E3 3.50 4.00 4.50 F 2.20 2.63 3.05 F1 0.50 0.85 1.20 E1 5.10 5.70 6.30 E2 0.50 1.10 1.80 e -- 2.30 -- C 0.35 0.50 0.65 F e 1.All Dimensions Are in Millimeters. 2.Dimension Does Not Include Mold Protrusions. R : 0.127~0.381 A2 A3 (0.1mm C Part Marking Information & Packing : TO-252 Laser Marking Part Number 8862H-&& LOGO YWWSSS Package Code VOUT 10 : 1.0V 18 : 1.8V 30 : 3.0V 12 : 1.2V 25 : 2.5V 33 : 3.3V 15 : 1.5V 28 : 2.8V Date Code (YWWSSS) YLast Digit Of The Year WWWeek SSSSequence 9