Customer Information sheet DRAWING No.: M300-1020045 IF IN DOUBT - ASK | NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm 9.25 = 5. 6040.05 x >. Y PART SECTION X-X SPECIFICATION: MATERIAL = BRASS FINISH = 0.25-0.30y GOLD OVER NICKEL MECHANICAL: INSERTION FORCE = 9N MAX WITHDRAWAL FORCE = IN MIN DURABILITY = 1000 OPERATIONS ENVIRONMENTAL: OPERATING TEMPERATURE = PACKING: -65C TO #175C NOTES: SUITABLE FOR WIRE GAUGE 22 AWG. MAXIMUM INSULATION DIAMETER @1.40mm, 8S3G210 TYPE A WIRE RECOMMENDED. STRIP WIRE BY 2.00mm FOR CRIMPING. MOP 4 22.09.14 12587 NAMEFISS.7 DATE C/NOTE APPROVED: MGP CHECKED: SB DRAWN: MARK G PLESTED CUSTOMER REF .: BULK 2. RECOMMENDED CRIMP TOOL = M22520/2-01, POSITIONER = 780-058. FOR COMPLETE CONNECTOR SPECIFICATION, SEE Fe RUSTON SHEET NS One OGL Meeo20/2-01, SEE AaTTR a COMPONENT SPECIFICATION CO48XX (LATEST ISSUE) 4. RECOMMENDED MATING PIN SIZE = D1.05-0. 90mm. . a NLS BARING AND ANY TOLERANCES MATERIAL: TITLE: (IZA SAVIN] | a arhicieeigh | 2, ime ste sao Imm HALE CRIMP PROPERTY OF THE HARWIN ri = 0. 90mm SMALL BORE DISCLOSED LOANED COPTED X XXX : +00 Imm DRAWING NUMBER: SHT www. harwin. com or TENDERING Of FOH ANT ANGLES = 5 FINISH: SEE ABOVE 4300 | 020045 ? technical@harwin.com THO HERR TOTP RTS SCON. UNLESS STATED | S/AREA: mm? OF,