LP
LED 2
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
RECOMMENDED PANEL CUTOUT
18
XXXX RC
203290
PCB EDGE
LED 1
0,12 ±0,02
13,63
0,66 16,66
14,72 0,58
±0,000,01
0,43 10,89 0,45 ±0,01
0,54
11,43 ±0,13
15,88 0,63
3,05 ±0,50 0,38 ±0,10
21,59 MAX0,85
I (1/2)
Class MAXMJ
8C8T, 1x1, INT. MAG., LED ALIGNED
MOD JACK - MJIM
133883
2:1
Consider protection memo from DIN 34
Information: Tolerances Scale
All Dimensions
in mm
www.ERNI.com
before using.
Subject to modification without
prior notice.
Designation
Drawing will not be updated.
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
A3
NO.
203290
LED 2 LEFT
LED 2 LINKS
LED 1 RIGHT
LED 1 RECHTS
LED
CODE
GREENGREEN L3
IDENT. NR.
TERMINAL FINISH: SOLDER
LED LENS: EPOXY
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni
OPERATING TEMPERATURE: -40°C TO 85°C
SCHEMATIC NUMBER: H3D01
Index Date
B 15.01.2008
[in]
NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R).
NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5).
MAXMJ
8C8T, 1x1, INT. MAG., LED ALIGNED
MOD JACK - MJIM
133883
2:1
Consider protection memo from DIN 34
Information: Tolerances Scale
All Dimensions
in mm
Designation
Subject to modification without
prior notice.
Drawing will not be updated.
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using. www.ERNI.com I (2/2)
Class
A3
[in]
Ω
20
mAFARBE
GREEN
COLOR
MAXTYP
2.2 2.5
LED SPECIFICATIONS
LED ANWEISUNG
f
VV
f
SCHALTPLAN
CIRCUIT DIAGRAMIf
910 11 12
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTÜCKUNGSSEITE)
1
8
910
1211
TOL ±0.05 [.002] UNLESS NOTED
4,06 0,16
2,54 0,10
1,60±0,07 X2
0,06±0,00
3,25±0,07 X2
0,13±0,00
3,05 0,12
15,49 0,61
8,89 0,35
8,18 0,32
13,26 0,52
11,43 0,45
0,89±0,07 X8
0,04±0,00
0,64 0,03
1,27 0,05
2,54 0,10
1,02±0,07 X4
0,04±0,00
MAGNETICS SPECIFICATIONS @ 25°C
AUTO MDIX COMPATIBLE
TURNS RATIO:
(P1-P2:J1-J2) 1CT : 1 ±3%
(P3-P6:J3-J6) 1CT : 1 ±3%
OCL(100 KHz, 0.1 Vrms, 8 mA)
(P1-P2:P3-P6) 350 µH MIN
DCR (P1-P2:P3-P6) 1.1 OHMS MAX
INSERTION LOSS:
0.1-100 MHz -1.1 dB MAX
RETURN LOSS:
0.5-30 MHz -18 dB MIN
40 MHz -15.5 dB MIN
50 MHz -13.6 dB MIN
60-80 MHz -12 dB MIN
CROSSTALK:
0.1-100 MHz -40 dB TYP
CMR:
0.1 - 30 MHz -50 dB TYP
30 - 60 MHz -40 dB TYP
60 - 100 MHz -35 dB TYP
ISOLATION 1,500 Vrms
SCHEMATIC NUMBER: H3D01
EXTENDED TERMPERATURE RANGE
ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D01
ELEKTRISCHER SCHALTPLAN
1000pF/2KV
P6
GND P8
N/C P7
P2
CT P5
P3
CT P4
P1
PCB
4X 75
J6
J7,8
J4,5
J2
J3
J1
CABLE
