USA
IDEC Corporation
Tel: (408) 747-0550
opencontact@idec.com
Canada
IDEC Canada Ltd.
Tel: (905) 890-8561
sales@idec.com
Australia
IDEC Australia Pty. Ltd.
Tel: +61-3-9763-3244
sales@au.idec.com
Japan
IDEC Corporation
Tel: +81-6-6398-2571
products@idec.co.jp
United Kingdom
IDEC Electronics Ltd.
Tel: +44-1256-321000
idec@uk.idec.com
Germany
IDEC Elektrotechnik GmbH
Tel: +49-40-253054-10
service@idec.de
Hong Kong
IDEC (H.K.) Co., Ltd.
Tel: +852-2803-8989
info@hk.idec.com
China/Beijing
IDEC (Shanghai) Corporation
Tel: +86-10-6599-5541
China/Shanghai
IDEC (Shanghai) Corporation
Tel: +86-21-5353-1000
idec@cn.idec.com
China/Shenzhen
IDEC (Shenzhen) Corporation
Tel: +86-755-8356-2977
Singapore
IDEC Asia Pte. Ltd.
Tel: +65-6746-1155
info@sg.idec.com
Taiwan
IDEC Taiwan Corporation
Tel: +886-2-2698-3929
service@idectwn.com.tw
Specifi cations and other descriptions in this catalog are subject to change without notice.
PS5R Slim Line Power Supplies
IDEC PS5R Slim Line power supplies have
all the features, all the power, and only half
the size of traditional power supplies. Save
valuable DIN Rail space with the 30W, 60W,
90W, 120W, or 240W models which can fit
any of your power needs. The PS5R Slim
Line models are UL508 and UL1604 listed
for hazardous locations. The 30W and 60W
models are also NEC Class 2 rated. The
120W and 240W models comply with SEMI
F47 sag immunity requirements.
©2006 IDEC Corporation. All Rights Reserved.
Catalog No. FL9Y-B100-0 2/06 15K
IDEC SmartRelay
Think Automation and beyond...
www.idec.com
SA1E Sensors
Choose your sensing method, operation mode, control output and
connection method with the simple and affordable SA1E sensors,
and get exactly what you need in a very small package. There are
32 models available, all rated IP67 for water resistance, with a re-
sponse time of 1 msec (maximum). Special interference prevention
allows close mounting of two sensors (except for through-beam
type), and the quick connect and disconnect option make installa-
tion a breeze.
Think Automation and beyond...
HW Switches
In basic black or stylish metal, the HW series of 22mm
switches from IDEC are available in several styles to
dress up any panel. HW pushbuttons and pilot devices
are internationally-rated, designed for use almost
anywhere in the world, and have removable contact
blocks, finger-safe terminals, and tamperproof
construction. Choose simple black plastic bezels for
clean uniformity or chrome-plated metallic bezels for
a rugged industrial look.
*
New
Advanced Features
Support Information
IDEC SmartRelay
www.idec.com/smartrelay
Technical support:
support@idec.com
800-262-IDEC
www.idec.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Look around you. IDEC SmartRelays are everywhere! You can
find them in lighting controls, ice-making machines, grocery
store mist systems and more. And there’s a good reason: IDEC
SmartRelays meet all safety requirements, while at the same
time saving you time and money.
Now our new fourth-generation SmartRelays include new
advanced feaures that offer even more versatility and
functions! With new features including: an analog output
module, 3 new function block types, upgraded software and
available expansion modules, you can get everything you need
from one compact module.
When you need a product you can rely on, is easy to use,
and meets safety standards, look no further than IDEC. Our
SmartRelays meet all industry standard approvals including
cULus, CE, C-tick and ABS (American Bureau of Shipping). Plus
they are FM approved for Class 1 Div 2 hazardous locations.
The bottom line is IDEC SmartRelays provide the right solution
for all your control needs!
Industrial Facility Systems
Conveyor systems •
Elevator controls •
Liquid level controls •
Motor, pump and valve controls •
Water treatment and irrigation systems •
Unique Solutions
Solar-electric systems •
Traffi c light controls •
Ventilation systems on ships •
Extreme environmental conditions •
Housing and Building Management
• Lighting controls
• HVAC
• Gate and door controls
• Shutter and sun blind controls
• Water and sprinkler systems
Smart Control - IDEC SmartRelay
23
The possibilities are endless
Monitoring Systems
• Access controls
• Alarm systems
• Parking lot control monitoring
123
Why spend all that time wiring when it's as simple as 1, 2, 3?
www.idec.com/smartrelay
4UBSU
7
.
$3
-
-
4UPQ
$
%$
.PUPS
"SNBUVSF
..
4MPX 'BTU
è
4QFFE$POUSPM
43$4
- -
- /
7F
) ) ) )
'JFME$POUBDUPS
$$
.PUPS'JFME
8JOEJOH
0-T
$
$3
$3
$3
Your time is valuable and with that in mind, IDEC has created a product
that will require very little of it. Using a system smaller than a PLC, with
minimal wiring, mounting as simple as a quick snap on to a DIN rail,
and programming as easy as one touch of a button, the user-friendly
SmartRelay is the perfect solution.
Why wait? Replace your complicated system of relays, timers and
counters with just one IDEC SmartRelay! It’s safe to say we all want to
reduce workloads while saving money, and with IDEC SmartRelays it’s
easy. These all-in-one controllers require less space in your control
cabinet. And as you know, space in your panel is money in your pocket.
Combine that with low maintenance and you’ve got a cost-effective
product you can count on for all your control operations!
Select "Program" from the
main menu.
Create your control logic. Select "Start," and you're done.
Your logic circuit can be accomplished ... by just installing this unit.
*
New
Advanced Features
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Look around you. IDEC SmartRelays are everywhere! You can
find them in lighting controls, ice-making machines, grocery
store mist systems and more. And there’s a good reason: IDEC
SmartRelays meet all safety requirements, while at the same
time saving you time and money.
Now our new fourth-generation SmartRelays include new
advanced feaures that offer even more versatility and
functions! With new features including: an analog output
module, 3 new function block types, upgraded software and
available expansion modules, you can get everything you need
from one compact module.
When you need a product you can rely on, is easy to use,
and meets safety standards, look no further than IDEC. Our
SmartRelays meet all industry standard approvals including
cULus, CE, C-tick and ABS (American Bureau of Shipping). Plus
they are FM approved for Class 1 Div 2 hazardous locations.
The bottom line is IDEC SmartRelays provide the right solution
for all your control needs!
Industrial Facility Systems
Conveyor systems •
Elevator controls •
Liquid level controls •
Motor, pump and valve controls •
Water treatment and irrigation systems •
Unique Solutions
Solar-electric systems •
Traffi c light controls •
Ventilation systems on ships •
Extreme environmental conditions •
Housing and Building Management
• Lighting controls
• HVAC
• Gate and door controls
• Shutter and sun blind controls
• Water and sprinkler systems
Smart Control - IDEC SmartRelay
23
The possibilities are endless
Monitoring Systems
• Access controls
• Alarm systems
• Parking lot control monitoring
123
Why spend all that time wiring when it's as simple as 1, 2, 3?
www.idec.com/smartrelay
4UBSU
7
.
$3
-
-
4UPQ
$
%$
.PUPS
"SNBUVSF
..
4MPX 'BTU
è
4QFFE$POUSPM
43$4
- -
- /
7F
) ) ) )
'JFME$POUBDUPS
$$
.PUPS'JFME
8JOEJOH
0-T
$
$3
$3
$3
Your time is valuable and with that in mind, IDEC has created a product
that will require very little of it. Using a system smaller than a PLC, with
minimal wiring, mounting as simple as a quick snap on to a DIN rail,
and programming as easy as one touch of a button, the user-friendly
SmartRelay is the perfect solution.
Why wait? Replace your complicated system of relays, timers and
counters with just one IDEC SmartRelay! It’s safe to say we all want to
reduce workloads while saving money, and with IDEC SmartRelays it’s
easy. These all-in-one controllers require less space in your control
cabinet. And as you know, space in your panel is money in your pocket.
Combine that with low maintenance and you’ve got a cost-effective
product you can count on for all your control operations!
Select "Program" from the
main menu.
Create your control logic. Select "Start," and you're done.
Your logic circuit can be accomplished ... by just installing this unit.
*
New
Advanced Features
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
*
New
*
New
Control at the push of a button
4 5
Digital/Analog Inputs
Each SmartRelay is equipped with 8 digital inputs for you to utilize in your applications.
On selected models such as FL1D-H12RCE, FL1D-B12RCE and FL1D-H12SND, inputs 5
and 6 can be used as fast inputs up to 2 kHhz and inputs 7 and 8 can be confi gured as
0-10V analog inputs. A maximum of 24 digital inputs can be utilized with this system
using digital expansion modules.
Operational Control Buttons
IDEC SmartRelays can be programmed
with just the push of a button! Control
buttons can be used to program, modify
and change preset parameters. The four
cursor keys can also be confi gured as
inputs if needed.
Digital Outputs
IDEC SmartRelays are equipped with 4 relay outputs rated at
10A/pt. A maximum of 16 outputs can be confi gured with this
system using digital expansion modules.
DIN Rail or Surface Mountable
Backlit LCD Display
System status — input, output, analog values,
timers and counters — can be monitored through
an embedded 4x12 LCD on your SmartRelay. This
allows you to display a predefi ned message with up
to 48 characters chosen from 103 special character
types. You can now adjust the contrast on
your display screen to your preference. Non-LCD
versions are also available.
EEPROM memory
Never worry about your program being lost again! With IDEC SmartRelays, your program
is stored in a non-volatile EEPROM.
Password Protection
Concerned about your program being copied or altered? IDEC SmartRelays keep you safe
with a unique password protection scheme allowing end users to access certain param-
eters without seeing or modifying the actual program.
Large Program Capacity
Running out of program space is a thing of the past. IDEC SmartRelays can handle up to
130 function blocks (2000 bytes).
Integrated Functions
8 predefi ned basic function blocks and 28 special function blocks ensure that almost all
your conventional switching devices — timers and counters — can be replaced. Three
functions include a PI controller (e.g. for temperature control), a two-stage ramp
function (e.g. for the control of frequency converters) and an analog multiplexer (e.g. for
light control). See page 9.
Quality
IDEC means quality and dependability you can trust and our SmartRelays are no exception.
Each model is cULus listed, CE certifi ed, EMC compliant, FM approved for Class 1 Div 2
hazardous locations, C-tick compliant, Lloyds Registered, and ABS approved.
Universal Voltages
SmartRelays are available in 12/24VDC, 24VAC/DC, and
100-240VAC/DC voltages.
Expansion Modules
Just snap-on and go! No cable required. Each
digital expansion module has 4 inputs and 4 outputs
available in 12/24VDC, 24VAC/DC and 100-240VAC/DC.
Up to 4 expansion modules can be mounted on an
IDEC SmartRelay base module. Plus SmartRelay
also has the capability to communicate within a
LONWORKS® network and AS-interface system with
its LONWORKS and AS-interface modules.
Analog Inputs & Outputs
Using the 2-pt analog input and 2-pt analog output
expansion modules allows you to easily control and
process your analog signal. IDEC SmartRelays can
control and process 0-10V and 4-20mA signals with
a 10-bit resolution. Up to 4 analog input and 1 analog
output modules can be attached to the base module.
Multifunction Interface
If you prefer not to program your
SmartRelay using the LCD and keypad,
simply connect the interface cable to
your PC and program with our WindLGC
software instead. Or you can plug-in the
special memory cartridge (FL1C-PM3)
and have your SmartRelay operate the
circuit program through the cartridge itself.
www.idec.com/smartrelay
R
64$
FM
APPROVED
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
*
New
*
New
Control at the push of a button
4 5
Digital/Analog Inputs
Each SmartRelay is equipped with 8 digital inputs for you to utilize in your applications.
On selected models such as FL1D-H12RCE, FL1D-B12RCE and FL1D-H12SND, inputs 5
and 6 can be used as fast inputs up to 2 kHhz and inputs 7 and 8 can be confi gured as
0-10V analog inputs. A maximum of 24 digital inputs can be utilized with this system
using digital expansion modules.
Operational Control Buttons
IDEC SmartRelays can be programmed
with just the push of a button! Control
buttons can be used to program, modify
and change preset parameters. The four
cursor keys can also be confi gured as
inputs if needed.
Digital Outputs
IDEC SmartRelays are equipped with 4 relay outputs rated at
10A/pt. A maximum of 16 outputs can be confi gured with this
system using digital expansion modules.
DIN Rail or Surface Mountable
Backlit LCD Display
System status — input, output, analog values,
timers and counters — can be monitored through
an embedded 4x12 LCD on your SmartRelay. This
allows you to display a predefi ned message with up
to 48 characters chosen from 103 special character
types. You can now adjust the contrast on
your display screen to your preference. Non-LCD
versions are also available.
EEPROM memory
Never worry about your program being lost again! With IDEC SmartRelays, your program
is stored in a non-volatile EEPROM.
Password Protection
Concerned about your program being copied or altered? IDEC SmartRelays keep you safe
with a unique password protection scheme allowing end users to access certain param-
eters without seeing or modifying the actual program.
Large Program Capacity
Running out of program space is a thing of the past. IDEC SmartRelays can handle up to
130 function blocks (2000 bytes).
Integrated Functions
8 predefi ned basic function blocks and 28 special function blocks ensure that almost all
your conventional switching devices — timers and counters — can be replaced. Three
functions include a PI controller (e.g. for temperature control), a two-stage ramp
function (e.g. for the control of frequency converters) and an analog multiplexer (e.g. for
light control). See page 9.
Quality
IDEC means quality and dependability you can trust and our SmartRelays are no exception.
Each model is cULus listed, CE certifi ed, EMC compliant, FM approved for Class 1 Div 2
hazardous locations, C-tick compliant, Lloyds Registered, and ABS approved.
Universal Voltages
SmartRelays are available in 12/24VDC, 24VAC/DC, and
100-240VAC/DC voltages.
Expansion Modules
Just snap-on and go! No cable required. Each
digital expansion module has 4 inputs and 4 outputs
available in 12/24VDC, 24VAC/DC and 100-240VAC/DC.
Up to 4 expansion modules can be mounted on an
IDEC SmartRelay base module. Plus SmartRelay
also has the capability to communicate within a
LONWORKS® network and AS-interface system with
its LONWORKS and AS-interface modules.
Analog Inputs & Outputs
Using the 2-pt analog input and 2-pt analog output
expansion modules allows you to easily control and
process your analog signal. IDEC SmartRelays can
control and process 0-10V and 4-20mA signals with
a 10-bit resolution. Up to 4 analog input and 1 analog
output modules can be attached to the base module.
Multifunction Interface
If you prefer not to program your
SmartRelay using the LCD and keypad,
simply connect the interface cable to
your PC and program with our WindLGC
software instead. Or you can plug-in the
special memory cartridge (FL1C-PM3)
and have your SmartRelay operate the
circuit program through the cartridge itself.
www.idec.com/smartrelay
R
64$
FM
APPROVED
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
",
*>À>iÊViVÌÊv
À>ÞÊ«iÊVÌ>VÌÃ
£
+
£
Ó
Î
{
",
-iÀiÃÊViVÌÊv
À>ÞÊVÃi`ÊVÌ>VÌÃ
£
+
£
Ó
Î
{
*>À>iÊViVÌÊv
À>ÞÊVÃi`ÊVÌ>VÌÃ
E
+
£
Ó
Î
{
Ê`}i®
`}iÊ`iÌiVÌÊÜÌ
i`}iÊiÛ>Õ>ÌÊi}°Êi`}i®
E
+
£
Ó
Î
{
£
Ó
Î
{
£ÓÎ{xÈÇn£äÞVi
+
8",
ÕLiÊV>}iÛiÀÊVÌ>VÌ
r£
+
£
Ó
"/
iVÌÊvÊVÃi`ÊVÌ>VÌ
£
+
£
-iÀiÃÊViVÌÊv
À>ÞÊ«iÊVÌ>VÌÃ
E
+
£
Ó
Î
{
Ê`}i®
`}iÊ`iÌiVÌÊÜÌ
i`}iÊiÛ>Õ>ÌʫðÊi`}i®
£
Ó
Î
{
E
+
£
Ó
Î
{
£ÓÎ{xÈÇn£äÞVi
+
Q
Trg
T
Q
Trg
Par
T
Q
Trg
R
T
Q
Trg
R
Par
Q
Trg
THTL
Q
Trg
Par
Q
Trg
R
T T
Q
Trg
R
Par
S
R
Q
RS
Q
S
R
Par
Latching Relay
Q
Trg
R
S
Q
Trg
RRS
S
Par
ON Delay
T
Q
Trg
T
Starts
Q
Trg
Par
R
OFF Delay ON/OFF Delay
Q
Trg
T
Q
Trg
Par
Q
No1
No2
Sa Su
1212
20
20
12 20 8 20
8
22
Sa Su
Su
ON 12：00
OFF 20：00
ON 8：00
OFF 22：00
Q
No1
No2
No3
No 02.25
No 04.15
Q
MM.DDt
Fed. Mar. Apr.
25 25
Q
Cnt
Dir
Par
R
3
2
1
0
Q
A
X
OFF=On+
o
n
Q
A
X
OFF=On+
Q
A
X
E
n
Aen+
Aen-
Aen
Q
En
Ax
Par
Q
Ax
Par
Q
Cnt
R
Dir
Par
Q
No
MM
DD
Retentive
ON Delay
Current Impulse
Relay
Seven-Day Time
Switch
Q
En
Ral
Mi
Mn
OT
R
Q
En
R
Ral
Par
h
Analog Value
Monitoring
Analog Differential
Trigger
Up/Down
Counter
Twelve-Month Time
Switch
Edge-Triggered Interval
Time-Delay Relay
Interval Time-Delay
Relay/Pulse Output
Operating Hours
Counter
Program Comparison
WindLGC 5.0 Software
WindLGC is the exclusive programming software for the IDEC
SmartRelay using Windows®.
Simplicity
Create, simulate, test and save your program in just a matter
of seconds using drag and drop functions.
Control
Choose either function block or ladder programming, but
keep in mind that you can always convert from one to the
other with just the click of an icon. Offl ine program simulation
(without the need for an actual unit) enables testing
of the entire program from a PC, or you can test and
monitor your IDEC SmartRelay online.
Documentation
You can create and save your
WindLGC program as a .pdf
or .jpg fi le. Professional
documentation is included
with all necessary confi guration
information such as comments and program settings.
On the Web
Visit IDEC at www.idec.com/smartrelay for additional
information on software upgrades, demo software, FAQs,
manuals or brochures.
Simulation Mode/Online Monitor
Ladder Programming
Basic Function Blocks
Loaded with functions!
Create, test and save your program in seconds
6 7
www.idec.com/smartrelay
Special Function Blocks
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
",
*>À>iÊViVÌÊv
À>ÞÊ«iÊVÌ>VÌÃ
£
+
£
Ó
Î
{
",
-iÀiÃÊViVÌÊv
À>ÞÊVÃi`ÊVÌ>VÌÃ
£
+
£
Ó
Î
{
*>À>iÊViVÌÊv
À>ÞÊVÃi`ÊVÌ>VÌÃ
E
+
£
Ó
Î
{
Ê`}i®
`}iÊ`iÌiVÌÊÜÌ
i`}iÊiÛ>Õ>ÌÊi}°Êi`}i®
E
+
£
Ó
Î
{
£
Ó
Î
{
£ÓÎ{xÈÇn£äÞVi
+
8",
ÕLiÊV>}iÛiÀÊVÌ>VÌ
r£
+
£
Ó
"/
iVÌÊvÊVÃi`ÊVÌ>VÌ
£
+
£
-iÀiÃÊViVÌÊv
À>ÞÊ«iÊVÌ>VÌÃ
E
+
£
Ó
Î
{
Ê`}i®
`}iÊ`iÌiVÌÊÜÌ
i`}iÊiÛ>Õ>ÌʫðÊi`}i®
£
Ó
Î
{
E
+
£
Ó
Î
{
£ÓÎ{xÈÇn£äÞVi
+
Q
Trg
T
Q
Trg
Par
T
Q
Trg
R
T
Q
Trg
R
Par
Q
Trg
THTL
Q
Trg
Par
Q
Trg
R
T T
Q
Trg
R
Par
S
R
Q
RS
Q
S
R
Par
Latching Relay
Q
Trg
R
S
Q
Trg
RRS
S
Par
ON Delay
T
Q
Trg
T
Starts
Q
Trg
Par
R
OFF Delay ON/OFF Delay
Q
Trg
T
Q
Trg
Par
Q
No1
No2
Sa Su
1212
20
20
12 20 8 20
8
22
Sa Su
Su
ON 12：00
OFF 20：00
ON 8：00
OFF 22：00
Q
No1
No2
No3
No 02.25
No 04.15
Q
MM.DDt
Fed. Mar. Apr.
25 25
Q
Cnt
Dir
Par
R
3
2
1
0
Q
A
X
OFF=On+
o
n
Q
A
X
OFF=On+
Q
A
X
E
n
Aen+
Aen-
Aen
Q
En
Ax
Par
Q
Ax
Par
Q
Cnt
R
Dir
Par
Q
No
MM
DD
Retentive
ON Delay
Current Impulse
Relay
Seven-Day Time
Switch
Q
En
Ral
Mi
Mn
OT
R
Q
En
R
Ral
Par
h
Analog Value
Monitoring
Analog Differential
Trigger
Up/Down
Counter
Twelve-Month Time
Switch
Edge-Triggered Interval
Time-Delay Relay
Interval Time-Delay
Relay/Pulse Output
Operating Hours
Counter
Program Comparison
WindLGC 5.0 Software
WindLGC is the exclusive programming software for the IDEC
SmartRelay using Windows®.
Simplicity
Create, simulate, test and save your program in just a matter
of seconds using drag and drop functions.
Control
Choose either function block or ladder programming, but
keep in mind that you can always convert from one to the
other with just the click of an icon. Offl ine program simulation
(without the need for an actual unit) enables testing
of the entire program from a PC, or you can test and
monitor your IDEC SmartRelay online.
Documentation
You can create and save your
WindLGC program as a .pdf
or .jpg fi le. Professional
documentation is included
with all necessary confi guration
information such as comments and program settings.
On the Web
Visit IDEC at www.idec.com/smartrelay for additional
information on software upgrades, demo software, FAQs,
manuals or brochures.
Simulation Mode/Online Monitor
Ladder Programming
Basic Function Blocks
Loaded with functions!
Create, test and save your program in seconds
6 7
www.idec.com/smartrelay
Special Function Blocks
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Special Function Blocks (Cont.)
Q
EN
Inv
Q
TH TL
Q
En
Par
Inv
Asynchronous
Pulse Generator
Q
Trg
T
Starts
THTL
Q
En
Par
Random
Generator
Fre
G-T
Q
fa=5Hz fa=3Hz
1s 1s
1000
SW
SW
0
A/1 or
A/2
Q
1000
A/1
0
1000
A/2
0
Q
1000
200
-200
A/1-A/2
0
tor =200
T
Starts
Q
Trg
T
15s
1s
Q
Trg
Par
Q
Ax
Ay
Par
Q
Ax
Par
Q
Fre
Par
Stairwell Light
Switch
Analog
Comparator
Analog Trigger
Frequency Trigger
Q
T
L
T
L
T
IL
T
1
T
Trg
Q
Trg
Par
R
Dual-Function
Switch
LONWORKS® Communication Module
*LoNWORKS® is a registered trademark of Echelon
• LONWORKS® Communication module contains standard network variable type (SNVT) to achieve open
network communication for building automation
• Maximum virtual inputs/analog inputs/outputs: 16/8/12 points
• An external interface file (XIF extension) unique to each LONWORKS® module is needed to communicate
through the LONWORKS® network and can be downloaded at www.idec.com/smartrelay
• See page 11 for more details
AS-Interface Communication Module
• The AS-Interface communication module provides optimum solutions for
decentralized controls and savings in installation space and wiring
• Virtual I/O points: 4 inputs, 4 outputs
• See page 11 for more details
Par
Q
En
P
Q
Switch
EN
Q
En
Par
Softkey
Message Text
S1
S2
S3
S4
S5
S6
S7
S8
0
0
0
0
1
1
0
0
1
0
0
0
0
1
1
0
0
1
0
0
0
0
1
1
1
0
1
0
0
0
0
1
1
1
0
1
0
0
0
0
0
1
1
0
1
0
0
0
1
1
0
1
0
0
0
1
Shift Up Shift Down
S4=Q (Example)
In
Q
Dir
Trg
Q
Trg
In
Dir
Par
Shift Register
Q
Ax
Par
Analog
Amplifier
8 9
Modules that expand the possibilities
Part Number Rated Voltage Input Signal Input Type Output Type With Clock
FL1D-H12RCE 12/24V DC DC
I7 and I8 are used
for digital/analog
PNP
Relay Output Yes
FL1D-H12SND 24V DC Transistor Source Output —
FL1D-H12RCA 24V AC/DC AC/DC PNP/NPN Relay Output Yes
FL1D-H12RCC 100-240V AC/DC PNP
FL1D Base Modules – With LCD
Part Number Rated Voltage Input Signal Input Type Output Type With Clock
FL1D-B12RCE 12/24V DC
DC
I7 and I8 are used
for digital/analog
PNP Relay Output Yes
FL1D-B12RCA 24V AC/DC AC/DC PNP/NPN Relay Output Yes
FL1D-B12RCC 100-240V AC/DC PNP
FL1D Base Modules – Without LCD
Part Number Module Input Power Input Type Output Type Total I/O
FL1B-M08B2R2
Combination
I/O Module
12/24V DC DC input Relay output 8 (4 in/4 Out)
FL1B-M08B1S2 24V DC DC input Transistor Output 8 (4 in/4 Out)
FL1B-M08C2R2 100-240V AC/DC AC/DC input Relay Output 8 (4 in/4 Out)
FL1B-M08D2R2 24V AC/DC AC/DC input Relay Output 8 (4 in/4 Out)
FL1B-J2B2 Analog Input Module 12/24V DC 0-10V, 4-20mA — 2 (2 in/0 Out)
FL1D-K2B2 Analog Output Module 24V DC — 0-10V 2 (0 in/2 Out)
I/O Expansion Modules
Part Number Module Input Power Total I/O
FL1B-CL1C12 LONWORKS® Communication Module 24V AC/DC
Input: 16 points
Analog Input: 8 points
Output: 12 points
Part Number Module Input Power Total I/O
FL1B-CAS2 AS-Interface Communication Module 30V DC Input: 4 points
Output: 4 points
www.idec.com/smartrelay
*
New
PI Controller Analog Ramp Control Analog Multiplexer
*
New
*
New
*
New
R
64$
FM
APPROVED
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Special Function Blocks (Cont.)
Q
EN
Inv
Q
TH TL
Q
En
Par
Inv
Asynchronous
Pulse Generator
Q
Trg
T
Starts
THTL
Q
En
Par
Random
Generator
Fre
G-T
Q
fa=5Hz fa=3Hz
1s 1s
1000
SW
SW
0
A/1 or
A/2
Q
1000
A/1
0
1000
A/2
0
Q
1000
200
-200
A/1-A/2
0
tor =200
T
Starts
Q
Trg
T
15s
1s
Q
Trg
Par
Q
Ax
Ay
Par
Q
Ax
Par
Q
Fre
Par
Stairwell Light
Switch
Analog
Comparator
Analog Trigger
Frequency Trigger
Q
T
L
T
L
T
IL
T
1
T
Trg
Q
Trg
Par
R
Dual-Function
Switch
LONWORKS® Communication Module
*LoNWORKS® is a registered trademark of Echelon
• LONWORKS® Communication module contains standard network variable type (SNVT) to achieve open
network communication for building automation
• Maximum virtual inputs/analog inputs/outputs: 16/8/12 points
• An external interface file (XIF extension) unique to each LONWORKS® module is needed to communicate
through the LONWORKS® network and can be downloaded at www.idec.com/smartrelay
• See page 11 for more details
AS-Interface Communication Module
• The AS-Interface communication module provides optimum solutions for
decentralized controls and savings in installation space and wiring
• Virtual I/O points: 4 inputs, 4 outputs
• See page 11 for more details
Par
Q
En
P
Q
Switch
EN
Q
En
Par
Softkey
Message Text
S1
S2
S3
S4
S5
S6
S7
S8
0
0
0
0
1
1
0
0
1
0
0
0
0
1
1
0
0
1
0
0
0
0
1
1
1
0
1
0
0
0
0
1
1
1
0
1
0
0
0
0
0
1
1
0
1
0
0
0
1
1
0
1
0
0
0
1
Shift Up Shift Down
S4=Q (Example)
In
Q
Dir
Trg
Q
Trg
In
Dir
Par
Shift Register
Q
Ax
Par
Analog
Amplifier
8 9
Modules that expand the possibilities
Part Number Rated Voltage Input Signal Input Type Output Type With Clock
FL1D-H12RCE 12/24V DC DC
I7 and I8 are used
for digital/analog
PNP
Relay Output Yes
FL1D-H12SND 24V DC Transistor Source Output —
FL1D-H12RCA 24V AC/DC AC/DC PNP/NPN Relay Output Yes
FL1D-H12RCC 100-240V AC/DC PNP
FL1D Base Modules – With LCD
Part Number Rated Voltage Input Signal Input Type Output Type With Clock
FL1D-B12RCE 12/24V DC
DC
I7 and I8 are used
for digital/analog
PNP Relay Output Yes
FL1D-B12RCA 24V AC/DC AC/DC PNP/NPN Relay Output Yes
FL1D-B12RCC 100-240V AC/DC PNP
FL1D Base Modules – Without LCD
Part Number Module Input Power Input Type Output Type Total I/O
FL1B-M08B2R2
Combination
I/O Module
12/24V DC DC input Relay output 8 (4 in/4 Out)
FL1B-M08B1S2 24V DC DC input Transistor Output 8 (4 in/4 Out)
FL1B-M08C2R2 100-240V AC/DC AC/DC input Relay Output 8 (4 in/4 Out)
FL1B-M08D2R2 24V AC/DC AC/DC input Relay Output 8 (4 in/4 Out)
FL1B-J2B2 Analog Input Module 12/24V DC 0-10V, 4-20mA — 2 (2 in/0 Out)
FL1D-K2B2 Analog Output Module 24V DC — 0-10V 2 (0 in/2 Out)
I/O Expansion Modules
Part Number Module Input Power Total I/O
FL1B-CL1C12 LONWORKS® Communication Module 24V AC/DC
Input: 16 points
Analog Input: 8 points
Output: 12 points
Part Number Module Input Power Total I/O
FL1B-CAS2 AS-Interface Communication Module 30V DC Input: 4 points
Output: 4 points
www.idec.com/smartrelay
*
New
PI Controller Analog Ramp Control Analog Multiplexer
*
New
*
New
*
New
R
64$
FM
APPROVED
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Open Network
(CC-Link, DeviceNet)
MicroSmart
AS-Interface
Master Module
AS-Interface
Communication Module
SX5A IP67
Communication Terminal
SX5A
IP20
Communication Terminal
Sensor (AS-Interface
Direct Connection Type)
HW tL6 tMCM Series
SwitchNet™ Control Units
(AS-Interface Direct Connection Type)
Sensor
SX5A
AS-Interface
Gateway
PS2R
AS-Interface
Power Supply
Branch
Connector
AS-Interface Safety at work
SX5A
Safety
Monitor
Light Curtain
Emergency
Stop Switch
Light Tower
Manifold Solenoid
Value
Starter Kit
• IDEC SmartRelay Starter Kit is an economical and ideal solution for first time IDEC SmartRelay users
• Package includes a base module, WindLGC programming software, programming cable, simulator switch
(DC models only) and a user’s manual
- NI1 I2 I3 I4 I5 I6 I7 I8
Q1 Q2 Q3 Q4
58
90
60
90
All dimensions in mm.
Detailed CAD drawings are available on our website at: www.idec.com/smartrelay.
Base Module Dimensions
10 11
Accessories
Simulator Switch
FL1B-Y1371-SW8
Programming Cable
FL1A-PC1
User’s Manual
FL9Y-B966-0
WindLGC 5.0 Software
FL9Y-LP1CDW
Memory Cartridge
FL1C-PM3
Part Number Description
SMARTSTART-BAC-D FL1D-B12RCC, WindLGC software and programming cable
SMARTSTART-BDC-D FL1D-B12RCE, WindLGC software, programming cable, and simulator switch
SMARTSTART-HAC-D FL1D-H12RCC, WindLGC software and programming cable
SMARTSTART-HDC-D FL1D-H12RCE, WindLGC software, programming cable, and simulator switch
Part Number Description
FL1C-PM3 Memory cartridge, with user defi ned protection freature
FL9Y-LP1CDW Programming Software: WindLGC Ver. 5CD w/Online Manual
FL1A-PC1 Programming Cable
BNDN1000 35mm Aluminum DIN Rail, 1m/3.28ft
BNL6 End Clips, Prevents modules from sliding off DIN Rail
MT-101 Memory Cartridge Removal Tool
FL1B-PSP1 Mounts Module Directly to Panel
FL1B-Y1371-SW8 8pt Input Simulator Switch, Used with 12, 24V DC Base Module Only
FL9Y-B966-0 FL1D User's Manual, Available for download at: www.idec.com/smartrelay
FC4A-USB USB to RS232 Converter, For use with "USB Only" PC's
I/O Expansion Module Dimensions
www.idec.com/smartrelay
Digital Input: I 123456789101112131415161718192021222324
Analog Input: AI 12345678
Digital Output: Q 1234 5678910111213141516
Digital Input: I 123456789101112 13141516
Analog Input: AI 1 2 3 4
Digital Output: Q 1234 5678 9101112
Digital Input: I 123456789101112131415161718192021222324
Analog Input: AI 1 2 345678
Digital Output: Q 1234 5678910111213141516
Digital Input: I 123456789101112 131415161718192021222324
Analog Input: AI 1 2 3 4 5678
Analog Output: AI 1 2
Digital Output: Q 1234 5678 910111213141516
The AS-Interface communication
module provides the optimum
solution for savings in cables,
installation space, and wiring
costs, and offers the possibility
of decentralized control.
Combination of easy-to-program
IDEC SmartRelay and LONWORKS
communicaton module achieves
remote control and monitoring on
a LONWORKS network.
AS-Interface Communication Module
FL1B-CAS2
Module Combination and Allocation Numbers
Using expansion I/O modules
FL1D-H12RCE FL1B-MO8B2R2 FL1B-CAS2
Base module Analog input module
Combination I/O module AS-interface communication module
LONWORKS Communication Module
FL1B-CL1C12
Module Combination and Allocation Numbers
1. Maximum number of I/O points when using LONWORKS communication module
2. Using analog inputs on the base module
FL1D-H12RCC FL1B-CL1C12
FL1D-H12RCE FL1B-CL1C12
3. Using I/O expansion module
FL1D-H12RCE FL1B-CL1C12
FL1B-MO8B2R2
Note 1: One LONWORKS communication module can be used with a base module and must be mounted at the right-most position of the row.
Note 2: I/O numbers are automatically allocated starting with the base module.
Note 3: When the base module with analog inputs is used, l1 to l8, Al1, and Al2 are occupied whether the analog inputs are used or not.
FL1B-J2B2 FL1D-K2B2
Base module
Combination I/O module
LONWORKS communication module
Analog input module
Analog output module
LonMark, LONWORKS, LON,
Lon Builder, Neuron, 3120,
3150, and Echelon are
registered trademarks of
Echelon, USA.
FL1B-J2B2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Open Network
(CC-Link, DeviceNet)
MicroSmart
AS-Interface
Master Module
AS-Interface
Communication Module
SX5A IP67
Communication Terminal
SX5A
IP20
Communication Terminal
Sensor (AS-Interface
Direct Connection Type)
HW tL6 tMCM Series
SwitchNet™ Control Units
(AS-Interface Direct Connection Type)
Sensor
SX5A
AS-Interface
Gateway
PS2R
AS-Interface
Power Supply
Branch
Connector
AS-Interface Safety at work
SX5A
Safety
Monitor
Light Curtain
Emergency
Stop Switch
Light Tower
Manifold Solenoid
Value
Starter Kit
• IDEC SmartRelay Starter Kit is an economical and ideal solution for first time IDEC SmartRelay users
• Package includes a base module, WindLGC programming software, programming cable, simulator switch
(DC models only) and a user’s manual
- NI1 I2 I3 I4 I5 I6 I7 I8
Q1 Q2 Q3 Q4
58
90
60
90
All dimensions in mm.
Detailed CAD drawings are available on our website at: www.idec.com/smartrelay.
Base Module Dimensions
10 11
Accessories
Simulator Switch
FL1B-Y1371-SW8
Programming Cable
FL1A-PC1
User’s Manual
FL9Y-B966-0
WindLGC 5.0 Software
FL9Y-LP1CDW
Memory Cartridge
FL1C-PM3
Part Number Description
SMARTSTART-BAC-D FL1D-B12RCC, WindLGC software and programming cable
SMARTSTART-BDC-D FL1D-B12RCE, WindLGC software, programming cable, and simulator switch
SMARTSTART-HAC-D FL1D-H12RCC, WindLGC software and programming cable
SMARTSTART-HDC-D FL1D-H12RCE, WindLGC software, programming cable, and simulator switch
Part Number Description
FL1C-PM3 Memory cartridge, with user defi ned protection freature
FL9Y-LP1CDW Programming Software: WindLGC Ver. 5CD w/Online Manual
FL1A-PC1 Programming Cable
BNDN1000 35mm Aluminum DIN Rail, 1m/3.28ft
BNL6 End Clips, Prevents modules from sliding off DIN Rail
MT-101 Memory Cartridge Removal Tool
FL1B-PSP1 Mounts Module Directly to Panel
FL1B-Y1371-SW8 8pt Input Simulator Switch, Used with 12, 24V DC Base Module Only
FL9Y-B966-0 FL1D User's Manual, Available for download at: www.idec.com/smartrelay
FC4A-USB USB to RS232 Converter, For use with "USB Only" PC's
I/O Expansion Module Dimensions
www.idec.com/smartrelay
Digital Input: I 123456789101112131415161718192021222324
Analog Input: AI 12345678
Digital Output: Q 1234 5678910111213141516
Digital Input: I 123456789101112 13141516
Analog Input: AI 1 2 3 4
Digital Output: Q 1234 5678 9101112
Digital Input: I 123456789101112131415161718192021222324
Analog Input: AI 1 2 345678
Digital Output: Q 1234 5678910111213141516
Digital Input: I 123456789101112 131415161718192021222324
Analog Input: AI 1 2 3 4 5678
Analog Output: AI 1 2
Digital Output: Q 1234 5678 910111213141516
The AS-Interface communication
module provides the optimum
solution for savings in cables,
installation space, and wiring
costs, and offers the possibility
of decentralized control.
Combination of easy-to-program
IDEC SmartRelay and LONWORKS
communicaton module achieves
remote control and monitoring on
a LONWORKS network.
AS-Interface Communication Module
FL1B-CAS2
Module Combination and Allocation Numbers
Using expansion I/O modules
FL1D-H12RCE FL1B-MO8B2R2 FL1B-CAS2
Base module Analog input module
Combination I/O module AS-interface communication module
LONWORKS Communication Module
FL1B-CL1C12
Module Combination and Allocation Numbers
1. Maximum number of I/O points when using LONWORKS communication module
2. Using analog inputs on the base module
FL1D-H12RCC FL1B-CL1C12
FL1D-H12RCE FL1B-CL1C12
3. Using I/O expansion module
FL1D-H12RCE FL1B-CL1C12
FL1B-MO8B2R2
Note 1: One LONWORKS communication module can be used with a base module and must be mounted at the right-most position of the row.
Note 2: I/O numbers are automatically allocated starting with the base module.
Note 3: When the base module with analog inputs is used, l1 to l8, Al1, and Al2 are occupied whether the analog inputs are used or not.
FL1B-J2B2 FL1D-K2B2
Base module
Combination I/O module
LONWORKS communication module
Analog input module
Analog output module
LonMark, LONWORKS, LON,
Lon Builder, Neuron, 3120,
3150, and Echelon are
registered trademarks of
Echelon, USA.
FL1B-J2B2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
USA
IDEC Corporation
Tel: (408) 747-0550
opencontact@idec.com
Canada
IDEC Canada Ltd.
Tel: (905) 890-8561
sales@idec.com
Australia
IDEC Australia Pty. Ltd.
Tel: +61-3-9763-3244
sales@au.idec.com
Japan
IDEC Corporation
Tel: +81-6-6398-2571
products@idec.co.jp
United Kingdom
IDEC Electronics Ltd.
Tel: +44-1256-321000
idec@uk.idec.com
Germany
IDEC Elektrotechnik GmbH
Tel: +49-40-253054-10
service@idec.de
Hong Kong
IDEC (H.K.) Co., Ltd.
Tel: +852-2803-8989
info@hk.idec.com
China/Beijing
IDEC (Shanghai) Corporation
Tel: +86-10-6599-5541
China/Shanghai
IDEC (Shanghai) Corporation
Tel: +86-21-5353-1000
idec@cn.idec.com
China/Shenzhen
IDEC (Shenzhen) Corporation
Tel: +86-755-8356-2977
Singapore
IDEC Asia Pte. Ltd.
Tel: +65-6746-1155
info@sg.idec.com
Taiwan
IDEC Taiwan Corporation
Tel: +886-2-2698-3929
service@idectwn.com.tw
Specifi cations and other descriptions in this catalog are subject to change without notice.
PS5R Slim Line Power Supplies
IDEC PS5R Slim Line power supplies have
all the features, all the power, and only half
the size of traditional power supplies. Save
valuable DIN Rail space with the 30W, 60W,
90W, 120W, or 240W models which can fit
any of your power needs. The PS5R Slim
Line models are UL508 and UL1604 listed
for hazardous locations. The 30W and 60W
models are also NEC Class 2 rated. The
120W and 240W models comply with SEMI
F47 sag immunity requirements.
©2006 IDEC Corporation. All Rights Reserved.
Catalog No. FL9Y-B100-0 2/06 15K
IDEC SmartRelay
Think Automation and beyond...
www.idec.com
SA1E Sensors
Choose your sensing method, operation mode, control output and
connection method with the simple and affordable SA1E sensors,
and get exactly what you need in a very small package. There are
32 models available, all rated IP67 for water resistance, with a re-
sponse time of 1 msec (maximum). Special interference prevention
allows close mounting of two sensors (except for through-beam
type), and the quick connect and disconnect option make installa-
tion a breeze.
Think Automation and beyond...
HW Switches
In basic black or stylish metal, the HW series of 22mm
switches from IDEC are available in several styles to
dress up any panel. HW pushbuttons and pilot devices
are internationally-rated, designed for use almost
anywhere in the world, and have removable contact
blocks, finger-safe terminals, and tamperproof
construction. Choose simple black plastic bezels for
clean uniformity or chrome-plated metallic bezels for
a rugged industrial look.
*
New
Advanced Features
Support Information
IDEC SmartRelay
www.idec.com/smartrelay
Technical support:
support@idec.com
800-262-IDEC
www.idec.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Section
Features..............................................H-2
Selection Guide..................................H-3
Function Blocks.................................H-4
Specifications ....................................H-5
Connection Diagrams .....................H-10
Dimensions.......................................H-12
General Information ......................H-13
Programming
•WindLGC . . . . . . . . . . . . . . . . . . .H-14
H
IDEC SmartRelay
www.idec.com/smartrelay
for more information on this product family visit
www.idec.com/smartrelay
Additional Web Resources
• New and updated product information
• Downloadable software demos & upgrades
• Part configuration tool & cross reference
• Online stock check & ordering
• IDEC field sales & distributor search
• Online literature request
• Downloadable manuals & CAD drawings
• Manufacturer’s suggested retail price list
• Product training schedule & locations
• Advertising & trade show schedules
• Press releases & FAQs
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Features
IDEC SmartRelay
H-2
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
H
IDEC SmartRelay
Other Characteristics
Digital/Analog Inputs
(6 Digital plus 2 Digital or Analog)
Multiple inputs provide direct communication
with pushbuttons, sensors, switches, etc.
(2kHz max. on I5 and I6). (Common use I/O for
digital and analog: I7 and I8 on FL1C-H12RCE,
FL1C-B12RCE, FL1C-H12SND.) Expandable up
to 24 digital inputs.
LCD Display Panel
Display up to 48 characters as a
text message. Monitor any of the 8
basic or 26 special function blocks,
or confirm the status of the program
for troubleshooting.
Multifunction Interface
A multifunction interface makes it easy to
insert and remove the memory cartridge
that controls the circuit program. It also
supports the PC interface cable for upload-
ing and downloading data from WindLGC.
Operational Control Buttons
Easy programming interface uses
only six buttons. No tools necessary.
Cursor keys can also be configured as
inputs.
Other Key Features
• Password protection
• Daylight savings time
• UL/c-UL listed, IEC61131/VDE0631,
EMC Compliant, C-tick listed
• FM approved for Class 1, Div 2 Class
1, Zone 2 hazardous locations.
Digital Outputs
Use the outputs to control lights,
small-sized motors and solenoid
valves up to 10A. Expandable up
to 16 digital outputs.
Text Display
It can display messages with
background lighting up to 48
characters long from a
selection of 97 character
types.
Operational Buttons
Use the selection buttons for
easy confirmation or modifi-
cation of the circuit being
displayed. The cursor keys
can be configured as inputs.
Memory Cartridge
FL1C-PM3 is a memory cartridge
with know-how protection. Not
only is it possible to save your
program, but also to protect it
from unintended modification,
copying or deletion.
Not required for operation.
Expansion Modules
Optional expansion I/O mod-
ules allow you to add digital
input, output and LONWORKS®/
AS-Interface communication
modules as well as analog
inputs to your system. Just
snap-on and go – no special
software or cables required.
IDEC SmartRelay
IDEC SmartRelay –the smart and expandable solution
Get smart with the fully programmable IDEC
SmartRelay, a compact, expandable CPU that can
replace multiple timers, relays and counters. Each
CPU houses a real-time clock and calendar, and
supports optional expansion I/O modules to
enhance your control and monitoring applications.
Program and edit using either the "smart" on-
board selection buttons and display interface, or
our even "smarter" software, WindLGC. The IDEC
SmartRelay is the ideal solution for managing
automatic lighting, access control, watering sys-
tems, pump control, or ventilation systems in fac-
tory or home automation.
HIghlights of the FL1C series
• 32-bit processor
• 130 connectable blocks
• 4 new function blocks
• 4 x12 backlight display
• Timer and counter frequency up to 2KHz
• Online monitor
• Ladder programming
• Invert of inputs saves NOT function blocks
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
IDEC SmartRelay
Selection Guide
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC H-3
H
IDEC SmartRelay
Base Module Part Number
Expansion Module Part Number
Starter Kit Part Number
Accessories
Part Number Rated Voltage Input Signal Input Type Output Signal With Display With Clock Input/Output
FL1C-H12RCE 12/24V DC DC
I7and I8 are used
for digital/analog
PNP Relay Output Yes Yes
8/4
FL1C-B12RCE —
FL1C-H12SND 24V DC Transistor Source Output Yes —
FL1C-H12RCA 24V AC/DC
AC/DC
PNP/NPN
Relay Output
Yes
Yes
FL1C-B12RCA —
FL1C-H12RCC 100-240V AC/DC PNP Yes
FL1C-B12RCC —
Part No. Module Power Voltage Input Output Total I/O
FL1B-M08B2R2
Combination I/O Module
12/24V DC DC input Relay output 8 (4 in/4 out)
FL1B-M08B1S2 24V DC DC input Transistor output 8 (4 in/4 out)
FL1B-M08C2R2 100-240V AC/DC AC/DC input Relay output 8 (4 in/4 out)
FL1B-M08D2R2 24V AC/DC AC/DC input Relay output 8 (4 in/4 out)
FL1B-J2B2 Analog Input Module 12/24V DC Analog input – 2 (2 in/0 out)
FL1B-CL1C12 L
ON
W
ORKS®
Communication Module* 24V AC/DC – – –
FL1B-CAS2 AS-Interface Communication Module* 30V DC _ _ _
Part Number Description
SMARTSTART-BAC-C FL1C-B12RCC, WindLGC software, and programming cable
SMARTSTART-BDC-C FL1C-B12RCE, WindLGC software, programming cable, and simulator switch
SMARTSTART-HAC-C FL1C-H12RCC, WindLGC software, and programming cable
SMARTSTART-HDC-C FL1C-H12RCE, WindLGC software, programming cable, and simulator switch
Part Number Description Note
FL1C-PM3 Memory Cartridge Memory cartridge with know-how protection
FL9Y-LP1CDW Programming Software: WindLGC Ver. 4 CD w/Online Manual
FL1A-PC1 PC Interface Cable Connection of SmartRelay to PC
BAA1000
BNDN1000 35MM DIN Rail Aluminum, 1m/3.28ft
BNL6 Mounting Clips
MT-101 Memory Cartridge Removal Tool
FL1B-PSP1 Direct Mounting Slides
FL1B-Y1371-SW8 8pt simulator switch used with 12, 24V DC base module only
FL9Y-B827 FL1C user’s manual
FC4A-USB USB/RS232 converter
* For more information see Section M, Communications & Networking.
Part Numbers
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Function Blocks
IDEC SmartRelay
H-4
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
H
IDEC SmartRelay
General Function Blocks Special Function Blocks
Function Blocks
Edge detection with
edge evaluation (pos. edge)
Edge detection with
edge evaluation (pos. edge)
Parallel connection of
normally closed contacts
Parallel connection of
normally open contacts
Series connection of
normally open contacts
Series connection of
normally closed contacts
Double changeover contact
Connection of closed contact
• AND
• AND (Edge)
• NAND
• NAND (Edge)
• OR
• NOR
• XOR
• NOT
&
Q
1
2
3
4
1
Q
1
2
3
4
1
2
3
4
&
Q
I1
I2
I3
I4
12345678910Cycle
Q
AND
&
Q
1
2
3
4
I1
I2
I3
I4
12345678910Cycle
NAND
Q
&
Q
1
2
3
4
1
Q
1
2
3
4
=1
Q
1
2
1
Q
1
• On-delay
Q
Q
Tr g
Tr g
Par
T
• Off-delay
QQ
Tr g
R
Par
Tr g
R
T
• Seven-day time switch
Q
Q
No1
No2
No3
No1
No2
Sa Su
1212
20
20
12 20 8 20
8
22
Sa Su
Su
ON 12：00
OFF 20：00
ON 8：00
OFF 22：00
• Latching relay
RS
S
RQ
Q
S
R
Par
• Retentive on-delay
Q
Q
Trg
R
Par
Trg
R
T T
• Up/down counter
Q
Q
Cnt
R
Dir
Par
Cnt
Dir
Par
R
3
2
1
0
• Interval time-delay relay/
Pulse output
Q
Q
Trg
Par
Trg
T
• Twelve-month time switch
No 02.25
No 04.15
Q
QNo
MM
DD
MM.DDt
Fed. Mar. Apr.
25 25
• Edge-triggered interval
time-delay relay
Q
Trg
Par
R
T
Q
Trg
TStarts
• On-/Off-delay
Q
Q
Trg
Par
Trg
THTL
• Current impulse relay
Q
Trg
RRS
S
Par
Q
Trg
R
S
• Analog differential trigger
Q
Ax
Par
Q
AX
OFF=On+?
o
n
Q
AX
OFF=On+?
• Analog value monitoring
Q
En
Ax
Par
Q
AX
En
Aen+?
Aen-?
Aen
• Operating hours counter
Q
Q
En
R
Ral
Par
En
Ral
Mi
Mn
OT
R
h
• Frequency trigger
Fre
G-TQ
Q
Fre
Par
fa=5Hz fa=3Hz
1s 1s
• Random generator
Q
QEn
Par
Trg
T
Starts
THTL
• Analog trigger
1000
SW
SW 0
A/1 or
A/2
Q
Q
Ax
Par
• Analog comparator
1000
A/1
0
1000
A/2
0Q
Q
Ax
Ay
Par
1000
200
-200
A/1-A/2
0
tor ?=200
• Stairwell light switch
T Starts
Q
QTrg
Par
Trg
T
15s
1s
• Message texts
Par
Q
En
P
• Asynchronous pulse generator
EN
Inv
Q
Q
En
Par
Inv
TH TL
• Softkey
Q
En
Par
Q
Switch
EN
• Dual-function switch
Q
Trg
Par
R
Q
TLTL
TIL
T1
T
Trg
• Analog amplifier
Q
Ax
Par
• Shift register
Q
Trg
In
Dir
Par
S1
S2
S3
S4
S5
S6
S7
S8
0
0
0
0
1
1
0
0
1
0
0
0
0
1
1
0
0
1
0
0
0
0
1
1
1
0
1
0
0
0
0
1
1
1
0
1
0
0
0
0
0
1
1
0
1
0
0
0
1
1
0
1
0
0
0
1
Shift Up Shift Down
S4=Q (Example)
In
Q
Dir
Trg
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
IDEC SmartRelay
Specifications
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC H-5
H
IDEC SmartRelay
Base Module Specifications
Item Specifications Compliant Standards
General Specifications
Dimensions (W x H x D) 72 x 90 x 55 mm —
Weight Approx. 190g —
Operating
temperature
Horizontal 0 to +55°C Cold: IEC60068-2-1
Hot: IEC60068-2-2
Vertical 0 to +55°C
Storage temperature -40 to +70°C —
Relative humidity 10 to 85% IEC60068-2-30
Pressure 795 to 1080 hPa —
Corrosion immunity Free from corrosive gases —
Degree of protection IP20
Vibration resistance 5 to 9Hz (amplitude: 3.2mm)
9 to 150Hz (acceleration: 10m/s
2
)IEC60068-2-6
Shock resistance 150 m/s
2
IEC60068-2-27
Dropping 50 mm (Drop height) IEC60068-2-31
Free fall (packaged) 1 m IEC60068-2-32
Emission Class B Group 1 EN55011
EMC
Emitted interference — EN50081-2, EN50082-2
Electrostatic discharge 8kV Air Discharge
6kV Contact Discharge IEC61000-4-2
Electromagnetic fields 10V/m IEC61000-4-3
Burst pulses 2KV (Supply and Signal Lines) IEC61000-4-4
Energy carriers single pulse (surge) 0.5kV(Power Lines): Symmetrical
1kV (Power Lines): Asymmetrical IEC61000-4-5
Communication cable 2 x 1.5 mm
2
,
1 x 0.5 to 2.5 mm
2
—
Base Module Part Number FL1C-H12RCE FL1C-H12SND FL1C-H12RCA FL1C-H12RCC
FL1C-B12RCE – FL1C-B12RCA FL1C-B12RCC
Base Module Operating Specifications
Power Supply
Rated voltage 12/24V DC 24V DC 24V AC/DC 100-240V AC/DC
Allowable Voltage Range 10.8-28.8V DC 20.4-28.8V DC 20.4V-26.4V AC
20.4V-28.8V DC
85-265 AC
100-253 V DC
Rated Frequency — — 47-63Hz 50/60Hz (47-63Hz)
Input Current 30-140 mA (12V DC)
20-75 mA (24V DC) 30-55 mA (24V DC) 40-110 mA (24V AC)
20-75 mA (24V DC)
10-40 mA (100V AC)
10-25 mA (240V AC)
5-25mA (100V DC)
5-15mA (240V DC)
Allowable Momentary
Power Interruption
2 ms (12V DC)
5 ms (24V DC) —5 ms 10 ms (100V AC)
20 ms (240V AC)
Power Consumption 0.3-1.7W (12V DC)
0.4-1.8W (24V DC) 0.7-1.3W (24V DC) 0.9-2.7W (24V AC)
0.4 to1.8W (24V DC)
1.1-4.6W (100V AC)
2.4-6.0W (240V AC)
0.5-2.9W (100V DC)
1.2-3.6W (240V DC)
Reverse Polarity Protection Yes Yes — —
Clock
Backup Duration 80h at 25°C — 80h at 25°C 80h at 25°C
Clock Accuracy ±2s / day maximum — ±2s / day maximum ±2s / day maximum
Specifications
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications
IDEC SmartRelay
H-6
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
H
IDEC SmartRelay
Base Module Part Number FL1C-H12RCE FL1C-H12SND FL1C-H12RCA FL1C-H12RCC
FL1C-B12RCE – FL1C-B12RCA FL1C-B12RCC
Base Module Operating Specifications (con’t)
Input
Input Signal DC DC AC/DC AC/DC
Input Points 8 (I1-I8) 8 (I1-I8) 8 (I1 - I8) 8 (I1-I8)
Analog Input Points 2 (I7, I8)* 2 (I7, I8)* — —
Fast Inputs 2 (I5, I6) Max 2KHz** 2 (I5, I6) Max 2 KHz** — —
Analog Input Voltage Range 0 to10V DC (maximum
rated voltage: 28.8V DC)
0 to 10V DC (maximum
rated voltage: 28.8V DC) ——
Rated Input Voltage 12/24V DC 24V DC 24V AC/DC 100-240V AC/DC
Allowable Voltage Range 10.8-28.8V DC 20.4-28.8V DC 0-26.4V AC
0-28.8V DC 85-253V AC, 100-253 VDC
Isolation Not Isolated Not Isolated Not Isolated Not Isolated
Operating
Range
Turn OFF Voltage < 5V DC < 5V DC < 5V AC/DC < 40V AC, < 30 VDC
Turn ON Voltage > 8V DC > 8V DC > 12V AC/DC > 79V AC, > 79VDC
Turn OFF Current < 1.0 mA (I1-I6)
< 0.05 mA (I7-I8)
< 1.0 mA (I1-I6)
< 0.05 mA (I7-I8) < 1.0 mA < 0.03 mA
Turn ON Current > 1.5 mA (I1-I6)
> 0.1 mA (I7-I8)
> 1.5 mA (I1-I6)
> 0.1 mA (I7-I8) > 2.5 mA > 0.08 mA
Turn ON Time
1.5ms (Typ.) (I1-14)
<1.0ms (I5, I6)
300ms Typ. (I7, I8)
1.5ms (Typ.) (I1-14)
<1.0ms (I5, I6)
300ms Typ. (I7, I8)
1.5 ms (Typ.) 50 ms (Typ.)
Turn OFF Time 1.5ms (Typ.) 1.5 ms (Typ.) 15 ms (Typ.) 50 ms (Typ.)
Wire Length 100m 100m 100m 100m
Output
Output Signal Relay Output Transistor Source Out-
put Relay Output Relay Output
Output Type 4NO contacts 4 points 4NO contacts 4NO contacts
Isolation Isolated Not Isolated Isolated Isolated
Dielectric Strength (between power/
input terminal and output terminals)
2,500V AC/1 minute
500V DC/1 minute —2,500V AC/1 minute
500V DC/1 minute
2,500V AC/1 minute
500V DC/1 minute
Output Voltage — Ext. power supply
20.4-28.8V DC ——
Maximum Load Current
Resistive Load
10A at 12/24V AC/DC
10A at 100/120V AC
10A at 230/240V AC
Inductive Load
2A at 12/24V AC/DC
3A at 100/120V AC
3A at 230/240V
0.3A
Resistive Load
10A at 12/24V AC/DC
10A at 100/120V AC/DC
10A at 230/240V AC/DC
Inductive Load
2A at 12/24V AC/DC
3A at 100/120V AC/DC
3A at 230/240V AC/DC
Resistive Load
10A at 12/24V AC/DC
10A at 100/120V AC
10A at 230/240V AC
Inductive Load
2A at 12/24V AC/DC
3A at 100/120V AC
3A at 230/240V AC
Short Circuit Protection External fuse
16A maximum
Internal current
limiting circuit: 1A
External fuse
16A maximum
External fuse
16A maximum
Minimum Switching Load 10 mA, 12V DC — 10 mA, 12V DC 10 mA, 12V DC
Initial Contact Resistance 100 m
Ω
maximum
(at 1A, 24V DC) —100 m
Ω
maximum
(at 1A, 24V DC)
100 m
Ω
maximum
(at 1A, 24V DC)
Mechanical Life 10,000,000 operations
minimum (no load, 10Hz) —10,000,000 operations
min (no load, 10Hz)
10,000,000 operations
minimum (no load, 10Hz)
Electrical Life
100,000 operations mini-
mum (rated load 10A,
1,800 operations/hour)
—
100,000 operations min
(rated load 10A, 1,800
operations/hour)
100,000 operations mini-
mum (rated load 10A,
1,800 operations/hour)
Switching
Rate
Mechanical Load 10 Hz — 10 Hz 10 Hz
Electrical Load — 10 Hz — —
Resistive Load/Lamp Load 2 Hz 10 Hz 2 Hz 2 Hz
Inductive Load 0.5 Hz 0.5 Hz 0.5 Hz 0.5 Hz
Specifications con’t
* Input terminals 17 and 18 are used for digital and analog inputs.
** When selecting frequency trigger function.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
IDEC SmartRelay
Specifications
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC H-7
H
IDEC SmartRelay
Expansion I/O Part Number Combination I/O Module Analog Input Module
FL1B-M08B2R2 FL1B-M08B1S2 FL1B-M08D2R2 FL1B-M08C2R2 FL1B-J2B2
Operating Specifications - Expansion Module
Power Supply
Rated voltage 12/24V DC 24V DC 24V AC/DC 100-240V AC/DC 12/24V DC
Allowable Voltage Range 10.8-28.8V DC 20.4-28.8V DC 20.4V-26.4V AC
20.4V-28.8V DC
85-265V AC
100-253V DC
10.8-15.6V DC
20.4-28.8V DC
Rated Frequency — — 47-63Hz 50/60Hz (47-63Hz) —
Input Current 30-140 mA (12V DC)
22-75 mA (24V DC) 30-45 mA (24V DC) 40-110 mA (24V AC)
20-75 mA (24V DC)
10-30 mA (100V AC)
10-20 mA (240V AC)
5-15mA (100V DC)
5-10mA (240V DC)
25-50mA
Allowable Momentary
Power Interruption
2 ms (12V DC)
5 ms (24V DC) —5 ms 10 ms (100V AC)
20 ms (240V AC) 5 ms
Power Consumption 0.3-1.7W (12V DC)
0.4-1.8W (24V DC) 0.8-1.1W (24V DC) 0.9-2.7W (24V AC)
0.4 to 1.8W (24V DC)
1.1-3.5W (100V AC)
2.4-4.8W (240V AC)
0.5-1.8W (100V DC)
1.2-2.4W (240V DC)
0.3-0.6W (12V DC)
0.6-1.2W (24V DC)
Reverse Polarity Protection Yes Yes — — Yes
Input
Input Signal DC DC AC/DC AC/DC Analog
Input Points 4 4 4 4 —
Analog Input Points — — — — 2
Input Impedance — — — 76 k
Ω
(0-10V DC)
155-250
Ω
(0-20mA DC)
Analog Input Range — — — 0-10V DC (28.8V max)
0-20mA (40mA max)
Digital Resolution — — — 10 bits (0-1000)
Rated Input Voltage 12/24V DC 24V DC 24V AC/DC 100-240V AC/DC —
Allowable Voltage Range 10.8-15.6V DC
20.4-28.8V DC 20.4-28.8V DC 0-26.4V AC
0-28.8V DC
85-253V AC
100-253V DC —
Isolation Not Isolated Not Isolated Not Isolated Isolated Not Isolated
Operating
Range
Turn OFF Voltage < 5V DC < 5V DC < 5V AC/DC < 40V AC
< 30V DC —
Turn ON Voltage > 8V DC > 8V DC > 12V AC/DC > 79V AC
> 79V DC —
Turn OFF Current < 1.0 mA < 1.0 mA < 1.0 mA < 0.3 mA —
Turn ON Current > 1.5 mA > 1.5 mA > 2.5 mA > 0.08 mA —
Turn ON Time 1.5ms 1.5 ms 1.5 ms (Typ.) 50 ms (Typ.) —
Turn OFF Time 1.5ms 1.5 ms 15 ms (Typ.) 50 ms (Typ.) —
Analog Value Conversion
Interval —— —50ms
Wire Length 100m 100m 100m 100m 10m (twisted-pair
shielded cable)
Output
Output Signal Relay Output Transistor Source
Output Relay Output Relay Output —
Output Type 4NO contacts 4 points 4NO contacts 4NO contacts —
Isolation Isolated Not Isolated Isolated Isolated —
Dielectric Strength
(between power/ input termi-
nal and output terminals)
2,500V AC/1 minute
500V DC/1 minute
2,500V AC/1 minute
500V DC/1 minute
2,500V AC/1 minute
500V DC/1 minute
2,500V AC/1 minute
500V DC/1 minute —
Output Voltage — Ext. power supply
20.4-28.8V DC ———
Maximum Load Current
Resistive Load
10A at 12/24V AC/DC
10A at 100/120V AC
10A at 230/240V AC
Inductive Load
2A at 12/24V AC/DC
3A at 100/120V AC
3A at 230/240V
0.3A
Resistive Load
5A at 12/24V AC/DC
5A at 100/120V AC/DC
5A at 230/240V AC/DC
Inductive Load
2A at 12/24V AC/DC
3A at 100/120V AC/DC
3A at 230/240V AC/DC
Resistive Load
10A at 12/24V AC/DC
10A at 100/120V AC
10A at 230/240V AC
Inductive Load
2A at 12/24V AC/DC
3A at 100/120V AC
3A at 230/240V AC
—
Short Circuit Protection External fuse required
16A max
Internal current
limiting resistor: 1A
External fuse
16A maximum
External fuse
16A maximum —
Minimum Switching Load 10 mA, 12V DC — 10 mA, 12V DC 10 mA, 12V DC —
Initial Contact Resistance 100 m
Ω
maximum
(at 1A, 24V DC) —100 m
Ω
maximum
(at 1A, 24V DC)
100 m
Ω
maximum
(at 1A, 24V DC) —
Mechanical Life 10,000,000 operations
(no load) —10,000,000 operations
min (no load, 10Hz)
10,000,000 operations
(no load) —
Electrical Life
100,000 operations
(rated resistive load
1,800 operations/hr)
—
100,000 operations mini-
mum (rated load 1,800
operations/hour)
100,000 operations
(rated resistive load
1,800 operations/hr)
—
Switching
Rate
Mechanical Load 10Hz — 10 Hz 10Hz —
Electrical Load — 10Hz — — —
Resistive Load/Lamp Load 2Hz 10Hz 2 Hz 2Hz —
Inductive Load 0.5Hz 0.5Hz 0.5 Hz 0.5Hz —
Specifications con’t
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications
IDEC SmartRelay
H-8
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
H
IDEC SmartRelay
Operating Specifications - L
ON
W
ORKS
Communication Module
Operating Temperature 0 to 55°C (no freezing)
Operating Humidity 10 to 85% RH (no condensation)
Storage Temperature –40 to +70°C (no freezing)
Storage Humidity 10 to 85% RH (no condensation)
Rated Power Voltage 24V AC/DC
Allowable Voltage Range 20.4 to 26.4V AC, 20.4 to 28.8V DC
Current Draw 33 mA max.
Dielectric Strength 500V DC, 1 minute
(between power terminal and dead parts)
Insulation Resistance 10 M
Ω
minimum
(500V DC megger between power terminal and dead parts)
EMC
Electrostatic
Discharge
8 kV air discharge
6 kV contact discharge
Burst Pulses 2 kV (power terminal)
Vibration Resistance 5 to 9 Hz, amplitude 3.5 mm
9 to 150 Hz, 9.8 m/s
2
Shock Resistance 150 m/s
2
Dimensions 35.5W
×
90H
×
58D mm
Mounting Style DIN rail or panel surface
Degree of Protection IP20
Terminal Style Screw-cage clamp terminal
Weight 85g
Communication System LON
®
system
Transceiver FTT-10A
Topology Bus topology, free topology
Transmission Rate 78 kbps
Neuron Chip TMPN3120FE5M (Toshiba)
CPU Clock Frequency 20 MHz
Transmission Distance
Bus topology: 1400m
(only FTT-10A transceiver, using Level 4 AWG22 cable)
Free topology: 500m total, 400m between nodes
(when using Level 4 AWG22 cable)
Network Variables
Input
Network
Variable
SNVT_obj_request: (Quantity 1) Request object mode
SNVT_switch: (Quantity 14) Switch light, alarm, window
contact, free inputs/outputs
SNVT_occupancy: (Quantity 2) Occupancy
SNVT_temp_p: (Quantity 1) Room temperature (°C)
SNVT_lux: (Quantity 1) Brightness - lighting level (lux)
SNVT_lev_percent: (Quantity 6) Position (%)
Output
Network
Variable
SNVT_obj_status: (Quantity 1) Output object status
SNVT_switch: (Quantity 8) Switch light, alarm, window
contact, free inputs/outputs
SNVT_occupancy: (Quantity 2) Occupancy
SNVT_tod_event: (Quantity 2) Scheduler program
Just current state
Configuration
Property SCPTmaxSendTime: Send heartbeat (Q5 to Q16)
Specifications con’t
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
IDEC SmartRelay
Specifications
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC H-9
H
IDEC SmartRelay
Operating Specifications - AS-Interface Communication Module
Operating Temperature 0 to 55°C
Storage Temperature –40 to +70°C
Relative Humidity 10 to 85% (no condensation)
Rated As-interface Voltage 30 VDC (26.5VDC to 31.6VDC)
Reverse Polarity Protection Yes
Current Draw 70 mA max.
EMC
Electrostatic
Discharge
8 kV air discharge (IEC61000-4-2)
4 kV contact discharge
Electromagnetic filed Filed strength 10V/m (IEC61000-4-3)
First Transient
Burst Pulse
1kV (criteria A) (IEC61000-4-4)
1kV (criteria B)
Radiated Emission Class A (EN55011)
Vibration Resistance 5 to 9 Hz, amplitude 3.5 mm
9 to 150 Hz, 9.8 m/s
2
Shock Resistance 147 m/s
2
11ms (X, Y, Z each direction 3 times)
Slave type Standard slave
Profile
I/O code 7
I/D code F
I/D2 code F
Degree of Protection IP20
Terminal Style Screw terminal (tightening torque: max. 0.5Nm)
Applicable wire 0.5 to 1.5mm
2
Instruction on a 35mm mounting rail according to DIN EN50022/wall mounting
Dimensions 36W
×
90H
×
58D mm
Weight 75g
IDEC SmartRelay System AS-Interface System
Inputs: Output data bits:
In D0
I
n+1
D1
I
n+2
D2
I
n+3
D3
Outputs: Input data bits:
Q
n
D0
Q
n+1
D1
Q
n+
2D2
Q
n+3
D3
“n” depends on the plug-in position of the expansion module relative to the IDEC SmartRelay CPU. It indicates the number of
the input or output in the IDEC SmartRelay program code.
Specifications con’t
Logic Assignments
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
General Information
IDEC SmartRelay
H-10
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
H
IDEC SmartRelay
Inputs (CPU)
FL1C-H12RCE/-B12RCE/H12SND
FL1C-H12RCC/-B12RCC
FL1C-H12RCA/-B12RCA
Connection Diagrams
The inputs of these devices are
non-isolated and therefore require
the same reference potential
(ground) as the power supply.
With the FL1B-H12RCE/-B12RCE
and FL1B-H12SND you can tap
the analog signal between the
supply voltage and ground
L+ M I1 I2 I3 I4 I5 I6 I7 I8
Input 8xDC
L N I1 I2 I3 I4 I5 I6 I7 I8
Input 8xAC/DC
The inputs of these devices are
arranged in 2 groups with 4
inputs each. Different phases are
only possible between, but not
within the blocks.
Current safety regulations (VDE 0110, ... and IEC 61131-2, ... as well as UL and CSA)
do not permit the connection of different phases to one input group (I1-4 or I5-8) of an
AC model or on the inputs of one digit al module.
24V
DC
PNP
Sensor Sensor
0V
PNP
+
–
+
–
PNP
24V
DC
Sensor Sensor
NPN
+
–
+
–
NPN
+V
NPN
FL1C-H12RCA FL1C-H12RCA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
IDEC SmartRelay General Information
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC H-11
H
IDEC SmartRelay
Outputs
Connecting the load to the FL1C-*12R**:
Protection with automatic circuit beaker (max. 16A) if desired
Connecting the load to a IDEC SmartRelay
with transistor outputs (FL1C-H12SND):
Analog Input Expansion Module
FL1B-J2B2
Connection Diagrams con’t
Current
measurement
Voltage
measurement
Grounding terminal
for connecting
ground and shielding
of the analog
measuring line
Ground
Cable shielding
DIN rail
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
General Information IDEC SmartRelay
H-12 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
H
IDEC SmartRelay
Base Module Expansion Module
LONWORKS®/AS-Interface Communication Module
Mounting Hole Layout
Dimensions
35
4
L1
N
I1
I2
I
3
I4
I
5
I
6
I7
I
8
Q1
Q2
Q3
Q4
72
9
0
55
35mm
4mm
36mm
90mm
53mm
Q1 Q2
L+ M11 12 13 14
12
Q3
12 Q4
12
12
RUN/STOP
53
58
90
35.5
L+
24VAC/DC
RUN/STOP
FL1B-CL1C12
Service
ABLON
X2
34
M
2-ø4
Mounting Holes
98mm
53mm 35.5mm
35.5mm
CPU Module
Expansion Module Expansion Module Expansion Module
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
IDEC SmartRelay General Information
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC H-13
H
IDEC SmartRelay
Maximum Setup
• High-speed/Optimal Communication Performance
For optimal and high-speed communication performance between the IDEC SmartRelay and the various modules, we recommend you install the digital
modules first, then the analog modules (see example above).
Setup With Different Voltage Classes
• Rules
Digital modules can only be connected to devices of the same voltage class.
• Overview: Connecting an expansion module to IDEC SmartRelay
• Overview: Connecting an additional expansion module to an expansion module
I/O Configuration with LONWORKS® Communication Module
Module Combination and Allocation Numbers
1. Maximum number of I/O points using LONWORKS® communication module
2. Using analog inputs on the base module
3. Using expansion I/O modules
Base module, LONWORKS® communication module, Combination I/O module, Analog input module
CPU Expansion Modules
M08B2R2 M08B1S2 M08D2R2 M08C2R2 J2B2 AS-i/LON
FL1C-H12RCE X X X – X X
FL1C-H12SND X X X – X X
FL1C-H12RCA X X X – X X
FL1C-H12RCC – – – X X X
FL1C-B12RCE X X X – X X
FL1C-B12RCA X X X – X X
FL1C-B12RCC – – – X X X
Expansion Module Additional Expansion Modules
M08B2R2 M08B1S2 M08D2R2 M08C2R2 J2B2 CAS2 CL1C12
FL1B-M08B2R2 X X X – X X X
FL1B-M08B1S2 X X X – X X X
FL1B-M08D2R2 X X X – X X X
FL1B-M08C2R2 – – – X X X X
FL1B-J2B2 X X X – X X X
FL1B-CAS2 AS-Interface X X X–X– –
FL1B-CL1C12 LONWORKS –––––– –
FL1C-H12RCC FL1B-CL1C12
Digital Input:I 123456789 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Analog Input:AI 1 2 3 4 5 6 7 8
Digital Output:Q 1234 5 6 7 8 9 10 11 12 13 14 15 16
FL1C-H12RCE FL1B-CL1C12
Digital Input:I 123456789 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Analog Input:AI 1 2 3 4 5 6 7 8
Digital Output:Q 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
FL1C-H12RCE FL1B-M08B2R2 FL1B-CL1C12
Digital Input:I 123456789 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Analog Input:AI 1 2 345 6 7 8
Digital Output:Q 1234 5 6 7 8 9 10 11 12 13 14 15 16
FL1B-J2B2
General Information
• Maximum Setup of IDEC SmartRelay With Analog
Inputs FL1C-H12RCE/B12RCE/H12SND
(CPU, 4 digital modules and 3 analog modules)
I1.....I6, I7, I8
AI1, AI2
CPU
Q1,,,Q4
I9...I12
FL1B-
M08B2R2
Q5...Q8
I13...I16
FL1B-
M08B2R2
Q9...Q12
I17...I20
FL1B-
M08B2R2
Q13...Q16
I21...I24
FL1B-
M08B2R2
AI3, AI4
FL1B-
J2B2
AI5, AI6
FL1B-
J2B2
AI7, AI8
FL1B-
J2B2
•
M
ax
i
mum
S
etup o
f
IDEC
S
mart
R
e
l
ay
Wi
t
h
out
A
na
l
og
Inputs FL1C-H12RCA/B12RCA/H12RCC/B12RCC
(CPU, 4 digital modules and 4 analog modules)
I1. . . . . . . . I8
CPU
Q1,,,Q4
I9...I12
FL1B-M08
Q5...Q8
I13...I16
FL1B-M08
Q9...Q12
I17...I20
FL1B-M08
Q13...Q16
I21...I24
FL1B-M08
AI1, AI2
J2B2
AI3, AI4
J2B2
AI5, AI6
J2B2
A17, A18
J2B2
1. The LONWORKS® communication module can
be used with any base module and expansion I/
O module.
2. The LONWORKS® communication module must
be mounted at the right-most position of the
row.
3. I/O numbers are automatically allocated start-
ing with the base module.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Programming Software IDEC SmartRelay
H-14 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
H
IDEC SmartRelay
WindLGC Programming Software
Program Comparison Simulation Mode/Online Monitor
Ladder Programming
WindLGC is the exclusive programming software for the IDEC
SmartRelay using Windows®. Edit, save, and print out your
programs.
WindLGC Ver. 4 Features:
• Ladder programming
• Online Monitor
• Program Comparison
• Time Simulation
• Simplified connection of the functions
• Programs can be saved in PDF or JPG format
Just click the function blocks you need and link function blocks for
easy wiring. Devise complicated circuits using the convenient func-
tions of WindLGC.
To configure IDEC SmartRelay FL1C series, you must upgrade to
WindLGC version 4.0.
WindLGC system requirements:
• OS: Windows95/98/ME/NT/2000/XP
• CPU recommendation: Pentium
266MHz or higher
• Memory: 64MB or more
• RAM recommendation: 128MB
• Hard disk space: 90MB or more for
installing WindLGC software.
• Monitor Recommendation: Display
more than 800 x 600 dots and 256 col-
ors
Free download service, if upgrading
from WindLGC Version 3 to Version 4,
available at www.idec.com/usa
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
