EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs 67-21 SUGC / C525 / TR8 Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free Descriptions The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Device Selection Guide Chip Material Emitted Color InGaN/Si C Super Green Lens Color Water Clear verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 1 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21 SUGC / C525 / TR8 Package Dimensions CL 2.20.1 CL - + Polarity 2.40.1 For reflow soldering (propose) Notes: .All dimensions are in millimeters verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 2 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21 SUGC / C525 / TR8 Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +100 Soldering Temperature Tsol 260 (for 5 second) Electrostatic Discharge ESD 1000 V Power Dissipation Pd 130 mW Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 100 mA Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 80 133 ----- mcd IF=20mA Viewing Angle 21/2 ----- 120 ----- deg IF=20mA Peak Wavelength P ----- 518 ----- nm IF=20mA Dominant Wavelength d ----- 525 ----- nm IF=20mA Spectrum Radiation Bandwidth ----- 35 ----- nm IF=20mA Forward Voltage VF 2.7 3.3 3.7 V IF=20mA Reverse Current IR ----- ----- 50 A VR=5V *The luminous intensity data did not including 10% testing tolerance. *Tolerance of forward voltage 0.1V. *Tolerance of Dominate Wavelength 1nm . verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 3 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21 SUGC / C525 / TR8 Typical Electro-Optical Characteristics Curves verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 4 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21 SUGC / C525 / TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 5 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21 SUGC / C525 / TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is 0.1mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 6 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21 SUGC / C525 / TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 7 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21 SUGC / C525 / TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 8 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21 SUGC / C525 / TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com verlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 9 of 9 Device No. : DSE-671-148 Prepared date:25.Apr.2006 Prepared by: Teresa Lee