Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD60120N50100AHF
Rev A
PRELIMINARY
Ultra Low Profile 0404 Balun
50Ω to 100Ω Balanced
Description
The BD60120N50100AHF is a low cost, low profile sub-miniature unbalanced
to balanced transformer designed for differential inputs and output locations on
modern chipsets in an easy to use surface mount package for applications including
point-to-point radio and wideband GaN. The BD60120N50100AHF is ideal for high
volume manufacturing and delivers higher performance than traditional ceramic
baluns. The BD60120N50100AHF has an unbalanced port impedance of 50 and a
100 balanced port impedance. This transformation enables single ended signals to
be applied to differential ports on modern integrated chipsets. The output ports have
equal amplitude (-3dB) with 180 degree phase differential. The
BD60120N50100AHF is available on tape and reel for pick and place high volume
manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
Features:
5.9 – 11.7 GHz
Thin Height
Profile
Ultra Low
Insertion Loss
Surface
Mountable
Tape & Reel
RoHS Compliant
Halogen Free
-55°C to 85°C
ROOM (25˚C)
Frequency
(GHz)
Port
Impedance
Return
loss (dB)
Insertion
loss (dB)
Amplitude
Balance
(dB)
Phase
Balance
(deg)
CMRR
(dB)
Power
Handling
(watts)
Unbal.
Bal.
Typ.
Min.
Typ.
Max.
Typ.
Min
Typ.
Max
Typ.
Max.
5.9-8.5
50
100
22
14
0.4
0.7
0.8
1.3
9
12
21
TBD
10.0-11.7
50
100
25
14
0.6
0.9
0.9
1.6
7
13
24
TBD
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
1.04±.10
1.04±.10
.56±.06
.30
.30
.50
.50
3x .25
3x .25
12
43
Bottom View (Far-side)Side ViewTop View (Near-side)
Mechanical Outline
Dimensions are in Millimeters Tolerances are Non-Cumulative
Unbalanced Port
GND / DC Feed
+ RF GND
4
3
Designation
Pin
1
2Balanced Port
Balanced Port
3x .27
3x .27
.24
.24
0.67±.07
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD60120N50100AHF
Rev A
Preliminary Typical Performance: 6.0 GHz. to 12.0 GHz.
5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0Return Loss
Freq [GHz]
[dB]
5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5
-3.6
-3.3
-3
-2.7
-2.4
-2.1
-1.8
-1.5
-1.2
-0.9
-0.6
-0.3
0Differential insertion loss
Freq [GHz]
[dB]
5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2Amplitude Balance
Freq [GHz]
[dB]
5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5
-20
-15
-10
-5
0
5
10
15
20 Phase balance
Freq [GHz]
[degree]
5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0CMRR
Freq [GHz]
[dB]
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD60120N50100AHF
Rev A
PRELIMINARY
Preliminary Wide Band Performance: 4.0 GHz. to 14.0 GHz.
4 5 6 7 8 9 10 11 12 13 14
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0Return Loss
Freq [GHz]
[dB]
4 5 6 7 8 9 10 11 12 13 14
-3.6
-3.3
-3
-2.7
-2.4
-2.1
-1.8
-1.5
-1.2
-0.9
-0.6
-0.3
0Differential insertion loss
Freq [GHz]
[dB]
4 5 6 7 8 9 10 11 12 13 14
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2Amplitude Balance
Freq [GHz]
[dB]
4 5 6 7 8 9 10 11 12 13 14
-20
-15
-10
-5
0
5
10
15
20 Phase balance
Freq [GHz]
[degree]
4 5 6 7 8 9 10 11 12 13 14
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0CMRR
Freq [GHz]
[dB]
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD60120N50100AHF
Rev A
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from organic PTFE based composites which possess excellent
electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and
ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
With No DC Bias
With DC Bias
.50
3x .29
.50
Plated thru
hole to
ground
.33
.22
.22
3x Transmission
Line
3x .29
Dimensions are in Millimeters
Mounting Footprint
Solder Resist
Footprint Pad (s)
Circuit Pattern
3x .29
3x .29 .50 .33
.33
.50
3x Transmission
Line
.22
.22
Plated thru
hole to
ground
Dimensions are in Millimeters
Mounting Footprint
Solder Resist
Footprint Pad (s)
Circuit Pattern
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD60120N50100AHF
Rev A
PRELIMINARY
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below.
Minimum order quantities are 4000 per reel.
