PHOTOCOUPLER Part Number: KB815 GENERAL PURPOSE HIGH ISOLATION VOLTAGE HIGH SENSITIVITY PHOTOCOUPLER SERIES FEATURES 1.High current transfer ratio.(CTR:MIN.600% at IF=1mA.VCE=2V) 2.High isolation voltage between input and output (Viso=5000 Vrms). 3.Compact dual-in-line package KB815 :1-channel type 4.Approved by VDE 0884 Teil2(NO:40006364),Recognized by UL and CUL, file NO.E225308. 5.RoHS Compliant. DESCRIPTION 1.The KB815 (1-channel) is optically coupled isolators containing a GaAS light emitting diode and a darlington silicon phototransistor. 2.The lead pitch is 2.54mm. APPLICATIONS 1.Computer terminals. 2.Registers,copiers,automatic vending machines. 3.System appliances, measuring instruments. 4.Industial robots. 5.Signal transmission between circuits of different potentials and impedances. SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 1 OF 9 ERP: 1205000004 PHOTOCOUPLER Part Number: KB815 *PACKAGE DIMENSIONS (UNIT:mm) DIP Type TOLERANCE : 0.5[0.02] UNLESS OTHERWISE NOTED. *Absolute Maximum Ratings (Ta=25C) Symbol Rating Unit Forward current I 50 mA Power dissipation P 70 mW V Parameter Input Output F Collector-emitter voltage V CEO 35 Emitter-collector voltage V ECO 6 V Collector current IC 80 mA Collector power dissipation PC 150 mW Ptot 200 mW Viso 5000 Vrms Total power dissipation Isolation voltage Operating temperature Topr -30~+100 C Storage temperature Tstg -55~+125 C Tsol 260 C Soldering temperature 40 to 60%RH, AC for 1 minute For 10 seconds SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 2 OF 9 ERP: 1205000004 PHOTOCOUPLER Part Number: KB815 *Electro-optical Characteristics Parameter Symbol Forward voltage Input Output Peak forward voltage VF I F =20mA VFM I FM =0.5A 3.0 V VR =4V 10 uA 10 -6 A 7500 % 0.8 1.0 V 60 300 53 250 Collector dark current I CEO VCE =10V,I F=0mA CTR I F =1mA, V CE=2V VCE(sat ) I F =20mA, I C=5mA Response time Rise time tr Fall time tf VCE=2V, I C=10mA,R L =100 1.2 Max. Unit V IR Collector-emitter saturation voltage Min. Typ. 1.4 Reverse current Current transfer ratio Transfer characteristics Conditions 600 1600 Ic CTR= IF X 100% Model No. Rank mark CTR(%) KB815L L 600 to 1200 KB815A A 1100 to 2200 KB815B B 2100 to 4200 KB815C C 4100 to 7500 SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 3 OF 9 ERP: 1205000004 PHOTOCOUPLER Part Number: KB815 Fig. 1 Current Transfor Ratio vs. Forward Current 500 VCE =2V Ta=25C 2000 Forward current I F (mA) Current transfer ratio CTR( %) 2400 Fig. 2 Forward Current vs. Forward voltage 1600 1200 800 400 200 Ta=75C 100 50C 50 -25C 20 10 5 2 1 0 0.1 0.2 0.5 1 2 3 4 5 6 7 10 0 Forward current IF(mA) Fig. 3 Collector Current vs. Collector-emitter Voltage 150 80 I F =10mA Pc(MAX) 60 5mA 40 2mA 20 1mA 0 0 1 2 3 4 5 Relatiovecurrent transfer ration( %) Ta=25 C Collector current I C (mA) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Forward voltage VF(V) Fig. 4 Relative Current Transfer Ratio vs. Ambient Temperature 100 IF=1mA VCE =2V 100 50 0 -25 Fig. 5 Collector-emitter Saturation Voltage vs. Ambient Temperature 0.5 0.4 0.3 0.2 0.1 0 25 50 75 100 Ambient temperature Ta(C) SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng Collector dark current I CEO (A) 0.6 0 75 100 VCE =10V 0.7 -25 50 10 -4 IF =20mA IC =5mA 0.8 25 Fig. 6 Collector Dark Current vs. Ambient Temperature 1.0 0.9 0 Ambient temperature Ta(C) Collector-emitter voltage VCE(V) Collector-emitter saturation voltage VCE(sat) (V) 25C 0C 10 -5 10 -6 10 -7 10 -8 10 -9 10 -10 -25 0 25 50 75 100 Ambient temperature Ta (C) DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 4 OF 9 ERP: 1205000004 PHOTOCOUPLER Part Number: KB815 Fig. 7 Forward Current vs. Ambient Temperature Fig. 8 Collector Power Dissipation vs. Ambient Temperature 60 200 Collector power dissipation Pc(mW) Forward current IF(mA) 50 40 30 20 10 0 -25 0 25 50 75 100 125 Ambient temperature Ta(C) VCE=2V I C=10mA Ta=25C Response time ( s) 200 100 tr 100 50 0 -25 0 25 75 50 100 125 Ambient temperature Ta(C) Fig. 9 Response Time vs. Load Resistance 500 150 Test Circuit for Response Time tf Vcc Input 50 Input td 10 RD RL Output Output 10% td 5 90% td tr 1 0.05 0.1 0.2 0.5 1 2 ts tf Load resistance RL (K ) Test Circuit for Frequency Response Fig. 10 Frequency Response VCE=2V I C=2mA Ta=25C Vcc RD 100 RL=10K -10 RL Output 1k s Voltage gain Av (dB) 0 -20 0.05 0.2 0.5 1 2 5 50 Frequency f(kHz) SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 5 OF 9 ERP: 1205000004 PHOTOCOUPLER Part Number: KB815 Fig. 11 Collector-emitter Saturation Voltage vs. Forward Current Collector-emitter saturation voltage VCE (sat) (V) 8 Ta=25 C 7 I C=0.5mA 6 1mA 5 3mA 5mA 7mA 4 50mA 3 2 1 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Forward current I F (mA) 3.5 4.0 * NOTES ON HANDLING 1.Recommended soldering conditions (Dip soldering) (1) Dip soldering Temperature 260 C or below (molten solder temperature) Time Less than 10 seconds. Cycle One cycle allowed to be dipped in solder including plastic mold portion. Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2.Cautions regarding noise Be aware that power is suddenly into the component any surge current may cause damage happen, even if the voltage is within the absolute maximum ratings. SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 6 OF 9 ERP: 1205000004 PHOTOCOUPLER Part Number: KB815 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. RESTRICTIONS ON PRODUCT USE The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices / types available in every country. We are mention about our product quality stablity, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing KINGBRIGHT products, to observe standards of safety, and to a avoid situations in which a malfunction or failure of a KINGBRIGHT product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that KINGBRIGHT products are used within specified operating ranges as set forth in the most recent products specifications. SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 7 OF 9 ERP: 1205000004 PHOTOCOUPLER Part Number: KB815 TOLERANCE : 0.4[0.012] UNLESS OTHERWISE NOTED. Dimension of Tube Unit:mm 5301.0 25.50.5 130.5 A 25.50.5 130.5 Kingbright 0040 O2.90.1-8 A A-A Side view 12.20 11.00 8.20 6.70 5.30 0.60 10.00 5301.0 Dimension of Carton *ORDERING INFORMATION SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng Part Number Package Package Style KB815 4-pin DIP 100pcs/each tube DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 8 OF 9 ERP: 1205000004 PHOTOCOUPLER Part Number: KB815 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAD1541 REV NO: V.10 APPROVED: WYENC CHECKED: Tracy Deng DATE: DEC/02/2008 DRAWN: Ting.Li PAGE: 9 OF 9 ERP: 1205000004