SERIES BNC 50 Q Series BNC Coaxial connector (Bayonet Navy Connector) with a two-pin bayonet lock- ing system for rapid and reliable connection and disconnection. BNC connectors are available with characteristic impedances Z = 50 Q and Z = 75 Q; both versions can be mated. The maximum frequency for the 50 Q version is 10 GHz, but optimum results are achieved from 0 to 4 GHz. The 75 Q version can be used successfully up to 1 GHz. Straight and angled connector types are available for flexible and semi-rigid cable with diameters from approx. 1.8 mm to 10.8 mm, in a variety of panel types and a large choice of components for printed circuit board applica- tions with various connection technologies. The BNC connector is one of the most frequently used and widespread coaxial connectors. IEC 169-8 MIL C-39012 VG 95200 CECC 22120 Design in accordance with: Quality tested in accordance with: US MIL-Std 202 Cable mounting: clamp and crimp versions Special versions: improved clamp captivated center contact gas-tight version 50 Q and 75 Q versions can be interconnected without restriction. Mechanical Characteristics REFERENCE PLANE Referenzebene MALE STECKER 180 | REFERENCE PLANE Referenzebene Serie BNC Koaxial-Steckverbinder ( Bayonet Navy Connector ) mit 2-nockigem Bajo- nettverschluB fir schnelles und zuverlassiges SchiieBen bzw. Offnen. Die Steckverbindung witd mit Wellenwiderstnden von Z = 50 Q oder Z=75Q geliefert aie beiden Austihrungen sind steckkompatibel. Der Einsaiztrequenzbereich tir die 50 Q-Vanante reicht bis ca. 10 GHz, wobe/ optimale Ergebnisse zwischen 0 und 4 GHz erzielt werden knnen. Die 75Q. - Variante Kann mit gutem Erfolg bis ca. 1 GHz eingesetzt werden. Es existeren Bauformen in gerader und abgewinkelter Austihrung fir Kabel mit Durchmesserm von ca. 1,8mm bis 10,8mm, fir Gehduseeinbau und fir Leitesplatieneinsatz mit verschiedenen AnschtuBtechniken, BNC- Steckverbindungen zahen zu den am hdufigsten und am weitesten ver- breiteten koaxiaten Steckverbindungen uberhaupt. AnschluBoimensionen nach: lEC 169-8 Mil C-39012 VG 95200 CECC 22120 Qualitdtsprifung nach: US MIL-Std 202 Aabelmoniage: Schraub- oder Crimpverbinaung Spezialaustihrungen: verbesserte Klemmung fesigehaltener nnenterter druckdichte Austihrung 50 Q- und 75 Q- Verbinder sind uneingeschrankt miteinander koppelbar. AnschluBmaBe BNC (50 Ohm) Serie 51 | MALE FEMALE | STECKER KUPPLER _| F rr rs ; min. max. min. max. G D A| 2.06 2.21 2.06 2.21 1) A B 1) 8.10 8.15 B Cc} 483 4.72 Cc Dj] 5.28 5.79 4.78 5.28 D E | 1.32 1.37 1) E F 15.06 10.52 F G 8.31 8.51 G H 10.97 11.07 H J 5.33 5.84 4.72 5.23 te K 7.00 nom. 7.00 nom. K FEMALE -_- ; - , KUPPLER 1) resilient, dim. to meet electrical and mechanical requirements fedemd aufgeweitet bzw. zusammengezogen (Erfiiitung elektr./mech. Forderungen) Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 50 Technical Characteristics BNC Technische Daten BNC Characteristic impedance 500/752 Wellenwiderstand = Frequency range max. 0...10 GHz /0...4 GHz Frequenzbereich max. opt. 0...4 GHz/0...1 GHz opt. VSWA (straight contacts) < 1.28 typ. VSWR (gerader. Kontakt) VSWR (right angle connector} < 1.36 typ. VSWR (rechtwinkeliger Stecker) Insertion loss (dB) 0.1 dB max. /1GHz typ. Damptung (dB) Insulation resistance > 5000 MQ [solationswiderstand Center contact resistance <1.5mQ Ubergangswiderstand Innenleiter Outer contact resistance <1mQ Ubergangswiderstand AuBenleiter Test voltage 1000 V rms Prifspannung Working voltage 400 V rms Betriebsspannung Power max. < 80 W (1 GHz) typ. Leistungsbelastbarkeit UC To eee em ele Mechanical characteristics Center contact retention force >15N innenteiter Haltekraft. Connecting operations > 500 Anzahl Steckzyklen Nel ueiahe Umgebungseinflusse Temperature range 65C - +165C Temperaturbereich Vibration MIL-STD-202 Meth, 204/B Vibration. : Climatical class according IEC IEC 68 155/55/21 Klimaklasse nach IEC Corrosion resistance Salt Spray MIL-STD-202 Meth. 101/8 Korrosionsbestindigkeit Degree of protection (mated pair) IP 40 Schutzgrad fir gekuppeltes Paar Housing, outer conductor Brass Gehduse, AuBenieiter Spring loaded center contacts CuBe fedemde Innenleiter Pin Contacts Brass Stittkontakte Insulator PTFE tsolator Crimping sleeve Copper Alloy Krimphiise - Gaskets Rubber ichlungen Plating outer contact Ni Oberflache AuGenleiter Plating center contact Au Oberflache Innenieiter Rosenberger Hachtfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 181 10SERIES BNC 50 Q STRAIGHT PLUG, Clamp STECKER gerade, klemm Part Number (OF Te1I- ey Eda Group Instruction 51S 101-006 A4 06, 07, 08 51A 51S 104-006 A4 06, 07, 08 51C A3 7x50 VG 96220 51S 106-001 4 01 SIE captivated contact 51S 106-002 A4 02, 03 SIE captivated contact 51S 106-006 A4 06, 07, 08 5S1E captivated contact STRAIGHT PLUG, Clamp STECKER gerade, klemm Part Number (oF: lo] > Assembiy | Remarks Group eal os (01a) 51S 106-015 A4 15, 17 510 STRAIGHT PLUG, Crimp STECKER gerade, crimp emule te 10F-])[-3 Assembly meal) Buel Group Instruction 267 51S 101-801 A4 ot 51T 11 W 150-401 78 51S 101-602 A4 02 51T 11 W 150-402 51S 101-803 A4 03 51T 11 W 150-403 - STRAIGHT PLUG, Crimp STECKER gerade, crimp eae Lei ig Cable Assembly eT ee ac) EEC Group Instruction 51S 101-106 A4 06 51 P41 11 W 150-206 51S 103-106 A4 06 51P1 11 W 180-206 BeCu outer contact 51S 101-1086 = 07,08 = S1 PI 11. W 150-208 i 51S 101-115 A4 15 510 11 W 150-215 _ total length 43 51S 101-117 A4 17 10 11 W 150-215 total length 43 INSULATED PLUG, Crimp STECKER vollisoliert, crimp Parl Number Cable Assembly Umea Buea Group | Instruction 31.1 51S 107-106 A4 06 51P1 11 W 150-206 182 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84/18 499SERIES BNC 50 Q STRAIGHT PLUG, Solder STECKER gerade, l6t Parl Number Cable Assembly | Remarks e1ce]0] >) Instruction 51S 101-271 A4 71 511 solder tag silver plated 51S 101-272 M4 72 51 $2 sokder tag silver plated RIGHT ANGLE PLUG, Clamp WINKELSTECKER, klemm Ea beL-1e Cable Assembly | Remarks Group Instruction 1$201-002 4 02, 03 51L 51 S 201-006 A4 06, 07, 08 Sik RIGHT ANGLE PLUG Clamp WINKELSTECKER, klemm elm De Cable Assembly | Remarks Group Instruction 51S 201-015 A4 15, 17 53 F1 RIGHT ANGLE PLUG, Soider Crimp lems =e Cable Assembly Group Instruction 1$ 201-301 A4 01 51M1 51S 201-302 A4 02 51M1 51S 201-303 4 03 51M1 51 $ 201-306 A4 06 51M 515 201-308 A4 07, 08 51M WINKELSTECKER, It-crimp Loraine ta a1 83 ET 11 W 150-101 a=7.8b=155 11 W 150-102 a=7.8;b=15.5 11W 150-103 a =7.8;b= 15.6 11W150-106 = a =13.5;b=21.2 11W 150-108 = a= 13.5;b= 21.2 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 183 10SERIES BNC 50 Q RIGHT ANGLE PLUG, Crimp WINKELSTECKER, crimp Part Number Cable PEST orate m aya e Rela SS Group Instruction 51 S 202-106 AS 06 51N 11 W 150-206 51 $ 202-108 A4 07, 08 51N 11 W 150-208 BULKHEAD PLUG GEHAUSESTECKER Part Number Panel Rule S read alt 51 S$ 501-200 A4 B2 PLUG for Printed Circuit Boards LEITERPLATTEN-STECKER Eel el) PEt Teale 23 51S 101-400 A4 B32 STRAIGHT JACK, Clamp KUPPLER gerade, klemm PET Mull ter] 9) Assembly | Remarks elcelT ] Instruction 51K 106-001 A4 01 S1E 51K 106-002 Ad 02 51E 51K 106-006 Ad 06 5S1E STRAIGHT JACK, Crimp KUPPLER gerade, crimp ele ube Cable Assembly Crimp-inseris Remarks Group Instruction 51K 101-601 A4 01 51T 11 W 150-401 51K 101-802 A4 02 StT 11 W 150-402 51K 101-803 A4 03 51T 11 W 150-403 33.3 78 @15 184 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 50 Q STRAIGHT JACK, Crimp KUPPLER gerade, crimp Ee ule Cable Assembly ttle UL Group Instruction 33 51K 101-106 Ad 06 5tP1 11 W 150-206 13.6 51K 101-108 Ad 07, 08 51 Pi 11 W 150-208 ee) a FLANGE JACK, Clamp FLANSCH-KUPPLER, klemm Pema nilel le Cable PERClh Panel BE Group Instruction ater aT | 51 K 406-001 A4 01 5S1E B6 4x 3-56 UNF 51K 406-002 A4 02, 03 51E B6 4x 3-56 UNF 51 K 406-006 A4 06, 07, 08 SIE B6 4x 3-56 UNF FLANGE JACK, Clamp FLANSCH-KUPPLER, klemm Pale te Cable PEL Panel | PELs Group Instruction are) 36.5 14 51K 405-015 A4 15,17 51D Bg 4x 6-32 UNC = 2 2 vv 3 & SW 16 FLANGE JACK, Crimp FLANSCH-KUPPLER, crimp rama alse (OF-18)(-) PE eli Trae Relat Group Tatita rel teya aaa] 33.3 14 78 51 K 401-801 A4 01 51T B6 11 W 180-401 4xM25 51K 401-802 A4 02 51T B6 11 W 150-402 4xM25 51K 401-803 A4 03 51T B6 11 W 150-403 4xM25 ( 2 a FLANGE JACK, Crimp FLANSCH-KUPPLER, crimp came Cable Assembly ea] OT alates UES Group Eta os to eat?) 33 14 13.5 51 K 401-106 Ad 06 51P BE 11 W 150-206 4x 3-56 UNF 51K 401-108 Ad 07, 08 51P B6 11 W 150-208 4x 3-56 UNF % MN a Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 185 10SERIES BNC 50 Q INSULATED FLANGE JACK ISOLIERTER FLANSCH-KUPPLER Pela ate (er ]e][- Eley eed ELE 27 Group Instruction tea are] 51 K 440-302 A4 02 51V B6 4x dia. 2.7 BULKHEAD JACK, Clamp EINBAUKUPPLER, klemm Part Number Cable Assembly eee Remarks Group Instruction rai} 26 12.8 51 K 806-001 A4 01 5161 BS captivated contact 51 K 506-003 A4 02, 03 5161 BS captivated contact BIK506-006A4 06,07,08 + STE B5 captivated contact 8 SW 12 Ssws BULKHEAD JACK, Crimp, EINBAUKUPPLER, crimp, Front Mount Einbau von vorne Pua neta 19F- 19) Assembly ell} Ord ana Remarks e]eol To) saa (oul aT} 33.3 12.5 51K 504-801 A4 01 51T B2 41 W 150-401 51K 504-802 A4 02 51T B2 11 W 150-402 9 51 K 504-803 Ad 03 51T B2 11 W 150-403 < SW 13 BULKHEAD JACK, Solder EINBAUKUPPLER, I6t Peal Cable Assembly al] GET 28.4 fe Igoty) Instruction Piercing - 12.5 51K 504-271 Ad 7 51S1 B2 51K 504-272 Ad 72 1S3 B2 0 ON 8 SW 13 BULKHEAD JACK, Clamp, EINBAUKUPPLER, klemm, Rear Mount Einbau von hinten Pe leis 19F-]9)[-3 PRM Jal Remarks Group Instruction Piercing 51 K 606-001 A4 01 S1E B3 captivated contact 51 K 606-002 A4 02, 03 51E B3 Captivated contact 51 K 606-006 A4 06, 07, 08 S1E B3 captivated contact 186 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 50 Q BULKHEAD JACK, Crimp, EINBAUKUPPLER, crimp, Rear Mount Einbau von hinten eames Lor: le) = PEON ea ae c DET Group | Instruction acetal} 33.3 20 a 78 51K 601-801 A4 01 51T B3 11 W 150-401 51K 601-802 A4 02 51T B3 11 W 150-402 51K 601-803 A4 03 51T B3 11 W 150-403 2.8 ae ue SW 16 SW 17 BULKHEAD JACK, Crimp, EINBAUKUPPLER, crimp, Rear Mount Einbau von hinten Parl Number Cable Assembly PEA Ofmm il ecatant 2400) Peeled Group alert ceitre)al Piercing 51K 611-106 A4 06 51P1 B3 14 W 150-206 51K 611-1084 07,08 51P1 B3 11 W 150-208 BULKHEAD JACK, Solder, Rear Mount EINBAUKUPPLER, I6t, Einbau von hinten Part Number 10-10) Assembly Pel PEt eicertl e) Instruction eae AT] 51K 611-271 A4 71 5151 B3 51K 611-272 Ad 72 5183 B3 RIGHT ANGLE FLANGE JACK WINKEL-FLANSCHKUPPLER Parl Number Panel SETS ead Le] 1 K 201-200 A4 B6 4xdia3.1 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 187 10SERIES BNC 50 Q RIGHT ANGLE BULKHEAD JACK EINBAU-WINKELKUPPLER Pan Number | Panel Et Piercing 51 K 202-200 A4 Ba SW13 015 FLANGE JACK FLANSCHKUPPLER Part Number PE PUES acter] 51 K 403-200 A4 B6 4% 3-56 UNF, rim dia. a =11.5 51 K 404-200 A4 B6 4x dia. 3.1, no rim FLANGE JACK FLANSCHKUPPLER Pant Number eT aT Remarks elem] 51 K 409-200 A4 BQ 4xdia. 3.4 FLANGE JACK FLANSCHKUPPLER ram eles Panel Eat Piercing 51 K 405-500 A4 B6 4xdia. 3.2 188 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 50 Q BULKHEAD JACK EINBAUKUPPLER Par! Number Panel Remarks aaa | 51 K 501-200 A4 B1 a= 13.8,b=26,c= 14.4 b 51 K 502-200 A4 B5 a=125,b=26,=127 a 51 K 503-200 A4 B18 a=125, b= 26,c=14 51 K 504-200 A4 B2 = a=12,b=26,c=125 8 51 K 506-200 A4 B2 a= 12,b=30,c=125 51K 507-200 A4 B2 a= 14, b= 29, c= 15, pressurized sw 13 51K 508-200 A4 B1 a= 14, b=33, c= 15, pressurized 51K 516-200 A4 B2 a= 12, b= 26, c = 12.5, with solder tags INSULATED BULKHEAD JACK EINBAUKUPPLER isoliert Parl Number Panel Remarks Piercing 30.2 14 51K 546-200 A4 B3 51 K 506-200 Ad with insulation washers and solder tag 2 Ansicht A r 4 a ~ Ol al Sw 13 A INSULATED BULKHEAD JACK EINBAUKUPPLER isoliert Pam ule PET} ELT 30 atta | 12.3 51K 553-200 A4 B2 oa = . nN a se} SW 13 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 189 10SERIES BNC 50 STRAIGHT JACK for PCB LEITERPLATTENKUPPLER gerade Planes ecu RET Piercing 51K 101-400 A4 B32 a=15 3 51 K 103-400 A4 B32 a= 19 STRAIGHT JACK for PCB LEITERPLATTENKUPPLER gerade penne Cee ote tear 51 K 102-400 A4 B33 STRAIGHT JACK for PCB LEITERPLATTENKUPPLER gerade eT et Panel | Remarks reat 7 51K 104-400 A4 B32 13 012 STRAIGHT JACK for PCB press-fit LEITERPLATTENKUPPLER gerade, press-fit Part Number ee al] Ree let Piercing 51K 101-40P A4 special with insulation washers RIGHT ANGLE JACK for PCB LEITERPLATTEN-WINKELKUPPLER Part Number Panel Remarks Piercing 51K 201-400 A4 B32 190 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 50 Q RIGHT ANGLE JACK for PCB LEITERPLATTEN-WINKELKUPPLER Pande Panel See aL] 51 K 204-400 A4 B32 dia. 12.5 insulation sleeve RIGHT ANGLE JACK for PCB LEITERPLATTEN-WINKELKUPPLER rma eel ae Piercing 51 K 205-40T A4 B32 tinned solder tags ADAPTOR STRAIGHT VERBINDER gerade Pela unlit lil) SEL Piercing 5158 101-S00 A4 ADAPTOR STRAIGHT VERBINDER gerade Pe TAm ill Panel BESS Piercing 32.5 51K 101-K00 A4 FLANGE ADAPTOR FLANSCH-VERBINDER emilee Panel Seta Piercing 51 K 401-K00 A4 B6 4x 3-56 UNF Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 191 10SERIES BNC 50 2 BULKHEAD ADAPTOR GEHAUSE-VERBINDER Part Number eal} GuElat 36 faced] 22.5 51 K 501-K00 A4 B3 pressurized SW 17 INSULATED BULKHEAD ADAPTOR GEHAUSE-VERBINDER isoliert ae alse elit) PELE Piercing 35.5 51 K 542-K00 A4 B3 215 SW 16 RIGHT ANGLE ADAPTOR WINKEL-VERBINDER lames zeal] Gar Tg) Piercing 51S 201-K00 A4 T-ADAPTOR T-VERBINDER Part Number Panel Remarks 204 Piercing 51S 301-K00 A4 . o15 33.2 192 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 50 Q T-ADAPTOR T-VERBINDER ramen ee Panel ACI rari] 37.5 51S 303-K00 A4 T-ADAPTOR T-VERBINDER Part Number Panel PMCILt Piercing 51 K 301-4400 A4 32.5 19.8 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 193 10SERIES BNC 50 Q PROTECTION CAP SCHUTZKAPPE Part Numbe: rll] PETE es ata alale) 51Z110000A PROTECTION CAP SCHUTZKAPPE Pema nl elie Py relat Piercing 51Z112000A PROTECTION CAP SCHUTZKAPPE Part Number Panel Remarks aa} 512 115-000A SHORTING CAP KURZSCHLUSSKAPPE Plame ela lal) Relat Piercing 512 111-000A SHORTING CAP KURZSCHLUSSKAPPE Pen nelle Panel LS eal] 51Z114000A 194 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 50 Q SOLDER TAG LOTFAHNE lam eles eral) Remarks Piercing 512 120-0008 dia. 9.7 SOLDER TAG LOTFAHNE Pree alee ee hal | Remarks err eeaL iT] 51 Z 320-000 T dia. 9.7 SPRING WASHER ZAHNSCHEIBE Pelee nls Panel REET Piercing 14.5 51Z121-000A dia. 10 INSULATION WASHER ISOLIERSCHEIBE Part Number Panel Brae eee) 51 Z 122-000 B3 for bulkhead jacks panel piercing B 2 'O INSULATION WASHER ISOLIERSCHEIBE Part Number Panel Remarks Piercing 51 Z 322-000 B 103 for bulkhead jacks panel piercing B 3 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 195 10SERIES BNC 50 Q INSULATION WASHER ISOLIERSCHEIBE Pe nls Panel elas Piercing St Z 323-000 dia.12.8 for bulkhead jacks panel piercing B 3 INSULATION CAP ISOLIERHULSE lem lille let] BETA ater] 14.6 51 2001-000 fits all BNC plugs TERMINATION PLUG ABSCHLUSSWIDERSTAND Stecker eae ils Pures 51S 155-010 A4 0.25 W, max. 2 GHz 29 51S 156-010 A4 0.25 W, max. 2 GHz, with chain 51S 157-010 A4 0.25 W, max. 2 GHz, with M4 stub @15 J TERMINATION JACK ABSCHLUSSWIDERSTAND Kuppler Part Number Panel STS Piercing 30 51K 155-010 A4 0.25 W, max. 2 GHz @147 196 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 75 O BNC 75 Q BNC 75Q BNC (75 Ohm) Serie 71 | REFERECE PLANE REFERECE PLANE Referenzebene Referenzebene MALE FEMALE F STECKER KUPPLER G min. max. min. max. _D A| 1.32 1.37 2.06 2.211) |A B 1) 8.10 8.15 B C | 4.83 472 |C 7 ? , D | 5.28 5.79 2.5 nom. D tT) a0 = <P ow E 7.00 nom. 7.00 nom. E 4 7 F 15.06 10.52 F G 831 | 851 |G H 1.44 nom. 10.97 | 11.07 |H MALE FEMALE 1) resilient, dim. to meet electrical and mechanical Tequirements STECKER KUPPLER fedemd aufgeweitet bzw. zusammengezogen (Erfillung elektr.mech. Forderungen) STRAIGHT PLUG, Clamp STECKER gerade, klemm lems -le Cable Assembly | Remarks Group earl royal 71S 106-002 Aa 02 51E captivated contact 71S 106-009 A4 09 51E captivated contact STRAIGHT PLUG, Clamp STECKER gerade, klemm PEM ull 1a Cable Assembly | Aemarks Group Tavlos to a] 71S 105-018 A4 18 1D 71S 105-026 A4 26 51D RIGHT ANGLE PLUG, Clamp WINKELSTECKER, kiemm ma ella {er} of) Assembly | Remarks Group | Instruction 71 201-002 A4 02 51L 71 201-009 A4 09 51L STRAIGHT PLUG, Crimp STECKER gerade, crimp Pelee ne Cable PET cule Or alae) CELE Group | Instruction 26.7 71S 101-802 A4 02 51T 11 W 150-402 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 197 10SERIES BNC 75 Q STRAIGHT PLUG, Crimp STECKER gerade, crimp lem niles Cabie PeStntelig ordre eS RNeasy Group Tas Cae rei tela] 718 102-109 A4 09 51P1 11 W 150-209 a=30,b=12 71S 103-109 A4 09 51P1 11 W 150-209 a= 30, B= 12, BeCu outer contact 71S 102-110 A4 09, 10 51 K4 11 W 150-209 a=30,b=12 71S 102-141 A4 1 51 K4 11 W 150-211 a=30,b=12 b 71S 102-113 A4 13 51 P6 11 W 150-213 a=30,b=12 3 71S 102-114 A4 14 51 P6 11 W 150-212 a=30,b=12 to 71 102-128 A4 28 51 Pi 11 W 150-211 a=30, b= 12 8 71S 102-140 A4 40 51P1 11 W 150-204 a=27,b=9 71S 102-141 A4 41 51P1 11 W 150-206 a=31,b= 135 74S 102-1V6 A4 v6 51P1 11 W 150-204 a=27,b=9 71S 102-126 A4 26 51 P4 11 W 150-206 a=33.5,b=15.5 71S 101-318 A4 18 51 P4 11 W 150-115 a= 33.5, b= 15.5 RIGHT ANGLE PLUG, Solder Crimp WINKELSTECKER, lot-crimp Peele Cable PETS bg olden) Arlee Group | instruction 20.8 71 S 201-302 A4 02 51Mi 11 W 150-102 a=7.8, b= 15.5 71 $ 201-309 A4 09 51M 11 W 150-109 a= 12,b= 19.7 = e 718 201-313 A4 13 51M 11 W 180-113 a= 12,b=19.7 . 71 $ 201-340 A4 40 51M1 11 W 150-104 a=9,b=16 : : RIGHT ANGLE PLUG, Crimp WINKELSTECKER, crimp Part Number Cable PY ordre ata) RET Group | Instruction 20.8 71 202-109 A4 09 51N 11W 150-209 a= 12,b=32 71S 202-140 A4 40 51N 11 W 150-204 a=9,b=29 < 71 $ 202-1V5 A4 V5 51N 11 W 150-209 a=12,b=32 : : 5 BULKHEAD PLUG GEHAUSESTECKER a ela Panel Remarks Piercing 71S 501-200 A4 B2 198 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84/18 499SERIES BNC 75 Q STRAIGHT JACK, Clamp KUPPLER gerade, klemm Era ma lel e Cable Assembly | Remarks Group | Instruction 30.5 71K 106-009 A4 09 51E STRAIGHT JACK, Crimp KUPPLER gerade, crimp MSs Cabie Assembly Ord oir a Remarks Group | Instruction 33.3 71K 101-802 A4 02 51T 11 W 150-402 7.8 aed a STRAIGHT JACK, Crimp KUPPLER gerade, crimp Pm iets Cable Peeled] Oita tlt saat Greats Group | Instruction 315 71K 101-109 A4 09 51P 11 W 150-209 12 71K 101-110 A4 09, 10 51K 11 W 150-209 71K 101-111 A4 11 51K 11 W 150-211 2 FLANGE JACK, Crimp FLANSCH-KUPPLER, crimp Beales L6r-] 910-3 Assembly Panel Bure 33.3 Group | Instruction ane LaT] - 78 71K 401-802 A4 02 51T B6 4xM25 Q ~~ a 14 FLANGE JACK, Crimp FLANSCH-KUPPLER, crimp Pe nl elas Lor} PET eh] eral Crimp-Inserts Et Group | Instruction Piercing 31.6 71K 441-109 A4 09 51P B6 11 W 150-209 4xdia. 2.8 15 2 12 71K 401-110 A4 9, 10 51K B6 11 W 150-209 4xdia. 2.8 71K 411-111 A4 aa 51K B6 11 W 160-211 4x dia. 28 = wo " N C Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84/18 499 199 10SERIES BNC 75 Q INSULATED FLANGE JACK ISOLIERTER FLANSCHKUPPLER Part Number (oF: }9)[ ECC eral} ere Group | Instruction Lact} 27 15.3 3 71K 440-302 A4 02 51V B6 4xdia.27 BULKHEAD JACK, Clamp EINBAUKUPPLER, klemm elem lis Cable Assembly Panel ETE 26 Group | Instruction Piercing Da 71 K 506-000 A4 09 51E B5 captivated contact SW 12 sws BULKHEAD JACK, Crimp, EINBAUKUPPLER crimp, Front Mount Einbau von vorne Part Number Cabl Assembi Pane farina A ks a a penile aan ae al 125 33.3 71K 504-802 A4 02 51T B2 11 W 150-402 SW 13 BULKHEAD JACK, Crimp, EINBAUKUPPLER crimp, Front Mount Einbau von vorne ea neta 16-) 9)[-3 PEC Pe SEIS Group | Instruction ate Lane] 71K 804-109 A4 09 51H B2 BULKHEAD JACK, Clamp, EINBAUKUPPLER kiemm, Rear Mount Einbau von hinten clam eines 16F-19] 12) Beli lal) PETS Group | Instruction aaa) 71K 606-009 A4 09 SIE B3 captivated contact 200 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499SERIES BNC 75 Q BULKHEAD JACK, Crimp, EINBAUKUPPLER crimp, Rear Mount Einbau von hinten Patel Cabie Assembly Lea Es Group | Instruction Piercing 33.3 71K 601-802 A4 02 51T B3 2 28 SW 16 SW 17 BULKHEAD JACK, Crimp, EINBAUKUPPLER crimp, Rear Mount Einbau von hinten clam elise Cable Assembly et) dma Remarks lCigele) Lied (0) Piercing 71K 611-109 A4 09 51P B3 11 W 150-209 a=12,b=345 71K 611-110 A4 09,10 51K B3 11 W 150-209 a=12,b=345 71 K 611-111 Ad 1 51K B3 17 W 150-211 a=12,b=345 71 K 611-140 A4 40 51P B3 11 W 150-204 a=9,b=315 RIGHT ANGLE BULKHEAD JACK EINBAU-WINKELKUPPLER Parl Number Panel Bere ae 17.5 Palais] rd 71 K 202-200 A4 B2 eal nN ~ N & SW 13 @15 FLANGE JACK FLANSCHKUPPLER Pan Number eal) Remarks Piercing 26.2 71 K 403-200 A4 B6 4x 3-56 UNF, centering collar dia 11 71 K 404-200 A4 B6 4x dia. 3.1, without collar x a 16 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 201 10SERIES BNC 75 FLANGE JACK FLANSCHKUPPLER le Panei | STS Trait 71K 408-200 A4 BQ 4xM25 71 K 409-200 A4 B9 4xdia. 3.4 FLANGE JACK FLANSCHKUPPLER Part Numbe: | Sane STE 6 71K 405-500 A4 B6 4x dia. 3.2 BULKHEAD JACK EINBAUKUPPLER Pea leo | Panel ature eaatare b 71K 504-200 A4 B2 a= 12,b=26,= 125 - 71K 506-200 A4 B2 a=12,b=30,c=125 71K 508-200 A4 B1 a= 14,6 = 33, c= 15, pressurized SW 13 EINBAUKUPPLER, isoliert INSULATED BULKHEAD JACK Pe uel Panel CTL faa] 71 K 546-200 A4 B3 71 K 506-200 A4 with insulation washers and solder tag solder tag STRAIGHT JACK for PCB LEITERPLATTENKUPPLER gerade Pe nels Panel Piel ts Piercing 71K 101-400 A4 B32 a=15 71K 103-400 A4 B32 a=19 202 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84/18 499SERIES BNC 75 Q STRAIGHT JACK for PCB LEITERPLATTENKUPPLER gerade Pe lo | Panel Rule tS Piercing 20 71K 102-400 A4 B33 STRAIGHT JACK for PCB LEITERPLATTENKUPPLER gerade Part Number lil Pelt Piercing 17 71K 104-400 A4 B32 STRAIGHT JACK for PCB Press-Fit LEITERPLATTENKUPPLER gerade, press-fit Part Number nelly ELS at slae1 LT] 27.7 71K 101-40P A4 B3,B89 22 18 SW 16 6.7 RIGHT ANGLE JACK for PCB LEITERPLATTEN-WINKELKUPPLER Pe less ie lit-t| Remarks Piercing 71 K 201-400 A4 B32 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84 /18 499 203 10SERIES BNC 75 Q RIGHT ANGLE JACK for PCB LEITERPLATTEN-WINKELKUPPLER Elements al] Remarks Prercing 71K 203-400 A4 B33 ADAPTOR STRAIGHT VERBINDER gerade CElem lisl 16 zea =1] PEt Piercing 33 71 101-S00 A4 ADAPTOR STRAIGHT VERBINDER gerade mL 1 izle 1] Guat a aed] 71K 101-K00 A4 32.5 ADAPTOR STRAIGHT VERBINDER gerade een nuts Pella Remarks Piercing 32.5 15.2 71K 401-K00 A4 B 4xM25 ADAPTOR STRAIGHT VERBINDER gerade Part Number Panel PCat ata 71K 501-K00 Ad B3 204 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84/18 499SERIES BNC 75 Q INSULATED ADAPTOR VERBINDER, isoliert Pes TT PEt Piercing 71K 542-K00 A4 B3 RIGHT ANGLE ADAPTOR WINKEL-VERBINDER Part Number lilt] SEI asa | 71S 201-K00 A4 T-ADAPTOR T-VERBINDER Ea unl as eal Pures Piercing 22.4 71S 301-K00 A4 015 33.2 Rosenberger Hochfrequenztechnik, POB 1260, D-84526 Tittmoning, Tel. 0 86 84 /18-0, Fax 0 86 84/18 499 205 10