T&B Catalog Number: UPC Number: Description: 210217 Status: Active 78621086771 Connector Insulation Piercing Ring Terminals 10 Stud, .38x.56x1.22 4,110 - 20,760 CMA General Stud Size 10 Dimension Information E* (inches) .17 A (inches) .38 B (inches) .56 C (inches) 1.22 D (inches) .41 Specifications Circular Mil Area 4,110 - 20,760 Round Wire Range AWG 14(a) - 10 Tooling Tooling 13100A, 13400, TBM15i Packaging T&B Order Multiple 250 T&B Inner Pack 250 Package in Units 1000 T&B Sold in UOM Each T&B Weight Per UOM 1.21 lbs. per 100 Application Support Product Selector DT_prod_selector_ringterm T&B Instruction Sheets TA00193-TB2 Overview Available on Website Connector & Tooling Chart Available on Website Notes *Note Reference dimension (crimped height). See installing die illustration for gauging. **Note Not recommended for aluminum magnet wire finer than 21 gauge or 0.4 mm. (a) Four wires max. (b) Six wires max. (c) Six wires max. each barrel (d) Conductors heavier than 6 AWG or 13 mm require special dies. Contact Thomas & Betts for assistance. (e) Crimping dies may not bottom. Connector height will depend on number and size of wires in barrel. Pump must deliver 9800 psi minimum. Wire sizes and combinations shown have been tested to and meet or exceed Thomas & Betts specifications. Connectors may be suitable for other wire sizes or combinations. Thomas & Betts sells these connectors with the understanding that the user will perform necessary tests to determine their suitability for the intended purpose. Certifications RoHS Compliance Yes For further technical assistance, please contact us... Thomas & Betts - USA 8155 T&B Blvd. Memphis, TN 38125 www.tnb.com T&B Technical Support MS 3B-50 8155 T&B Blvd. Memphis, TN 38125 Hours: 7AM - 6PM CDT Monday-Friday Phone: (888) 862-3289 Fax: (901) 252-1321 Email:techsupport@tnb.com