Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 General Description Features The AP4300 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. Op Amp * Input Offset Voltage: 0.5mV * Supply Current: 250A per Op Amp at 5.0V Supply Voltage * Unity Gain Bandwidth: 1MHz * Output Voltage Swing: 0 to (VCC - 1.5) V The device contains two operational amplifiers and a precision shunt regulator. Op Amp 1 is designed for voltage control, whose non-inverting input internally connects to the output of the shunt regulator. Op Amp 2 is for current control with both inputs uncommitted. The IC offers the power converter designer a control solution that features increased precision with a corresponding reduction in system complexity and cost. * Power Supply Range: 3 to 18V Voltage Reference * Fixed Output Voltage Reference: 2.5V, 2.6V * Voltage Tolerance: 0.5%, 1% * Sink Current Capability from 0.1 to 80mA The AP4300 is available in standard packages of DIP8 and SOIC-8. Applications * * SOIC-8 Battery Charger Switching Power Supply DIP-8 Figure 1. Package Types of AP4300 BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 1 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Pin Configuration M Package/P Package (SOIC-8/DIP-8) OUTPUT 1 1 8 VCC INPUT 1- 2 7 OUTPUT 2 INPUT 1+ / VKA 3 6 INPUT 2- GND 4 5 INPUT 2+ Top View Figure 2. Pin Configuration of AP4300 Functional Block Diagram OUTPUT 1 1 - 8 VCC 7 OUTPUT 2 + 2 INPUT 1 + 3 6 INPUT 2 GND 4 5 Figure 3. Functional Block Diagram of AP4300 BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 2 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Functional Block Diagram (Continued) VCC 6A 4A 100A Q5 Q6 Q2 INPUT- Q3 Cc Q7 Q4 Q1 Rsc OUTPUT INPUT+ Q11 Q10 Q8 Q13 Q12 Q9 50A Figure 4. Op Amp Functional Block Diagram (Each Amplifier) VKA 20A 20A GND Figure 5. Voltage Reference Functional Block Diagram BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 3 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Ordering Information AP4300 E1: Lead-free Circuit Type Blank: Tin Lead TR: Tape and Reel Voltage Tolerance A: 0.5% B: 1% Package M: SOIC-8 P: DIP-8 Package Reference Voltage Voltage Tolerance 2.6V DIP-8 2.5V Temperature Range Blank: Tube Output Voltage Reference A: 2.6V B: 2.5V Part Number Tin Lead Marking ID Lead Free Tin Lead Lead Free 0.5% AP4300AP-A AP4300AP-AE1 AP4300AP-A AP4300AP-AE1 1% AP4300BP-A AP4300BP-AE1 AP4300BP-A AP4300BP-AE1 AP4300AP-B AP4300AP-BE1 AP4300AP-B AP4300AP-BE1 AP4300BP-B AP4300BP-BE1 AP4300BP-B AP4300BP-BE1 AP4300AM-A AP4300AM-AE1 AP4300AM-A AP4300AM-AE1 0.5% -40 to 105oC 1% 0.5% AP4300AM-ATR AP4300AM-ATRE1 AP4300AM-A AP4300AM-AE1 2.6V AP4300BM-A 1% -40 to 105oC SOIC-8 AP4300BM-AE1 AP4300BM-ATR AP4300BM-ATRE1 AP4300BM-A AP4300BM-AE1 AP4300AM-B 0.5% 2.5V AP4300AM-BE1 AP4300AM-B AP4300AM-BE1 AP4300AM-BTR AP4300AM-BTRE1 AP4300AM-B AP4300AM-BE1 AP4300BM-B 1% AP4300BM-A AP4300BM-AE1 AP4300BM-BE1 AP4300BM-B AP4300BM-BE1 AP4300BM-BTR AP4300BM-BTRE1 AP4300BM-B AP4300BM-BE1 Packing Type Tube Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 4 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit Power Supply Voltage (VCC to GND) VCC 20 V Op Amp 1 and 2 Input Voltage Range (Pins 2, 5, 6) VIN - 0.3 to VCC + 0.3 V Op Amp 2 Input Differential Voltage (Pins 5, 6) VID 20 V Voltage Reference Cathode Current (Pin 3) IK 100 mA Power Dissipation PD Storage Temperature Range TSTG DIP-8 800 SOIC-8 500 mW -65 to 150 o C > 200 ESD Protection Voltage (Machine Model) V Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Recommended Operating Conditions Parameter Min Max Unit 3 18 V -40 105 Supply Voltage Ambient Temperature o C BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 5 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Electrical Characteristics Operating Conditions: VCC = +5V, TA= 25oC unless otherwise specified. Parameter Conditions Min Total Supply Current, Excluding V = 5V, no load, -40oC T 105oC CC A Current in Voltage Reference VCC = 18V, no load, -40oC TA 105oC Typ Max Unit 0.5 0.8 mA 0.6 1.2 2.600 2.613 Voltage Reference Section Reference Voltage for AP4300-A Reference Voltage for AP4300-B IK = 10mA, 0.5% tolerance 2.587 TA = 25oC 1% tolerance 2.574 IK = 10mA, 0.5% tolerance 2.487 1% tolerance 2.475 TA = 25oC Reference Voltage Deviation over I = 10mA, T = -40 to 105oC K A Full Temperature Range Minimum Cathode Current for Regulation Dynamic Impedance IK = 1.0 to 80mA, f<1kHz V 2.626 2.500 2.513 V 2.525 5 24 mV 0.1 1 mA 0.2 0.5 3 mV Op Amp 1 Section (VCC = 5V, VO = 1.4V, TA = 25oC, unless otherwise noted) Input Offset Voltage 0.5 TA = 25oC Input Offset Voltage Temperature Drift TA = -40 to 105oC 5 TA = -40 to 105oC 7 V/ oC 150 nA Input Bias Current (Inverting Input T = 25oC A Only) 20 Large Signal Voltage Gain VCC = 15V, RL = 2K, VO = 1.4 to 11.4V 85 100 dB Power Supply Rejection Ratio VCC = 5 to 18V 70 90 dB Output Current Source VCC = 15V, VID = 1V, VO =2V 20 40 mA Sink VCC = 15V, VID = -1V, VO = 2V 10 20 mA Output Voltage Swing (High) VCC = 18V, RL = 10K, VID = 1V 16 16.5 V Output Voltage Swing (Low) VCC = 18V, RL = 10K, VID = -1V Slew Rate VCC = 18V, RL = 2k, AV = 1, VIN = 0.5 to 2V, CL = 100pF 0.2 0.5 V/ s Gain Bandwidth Product VCC = 18V, RL = 2k, CL = 100pF, VIN = 10mV, f = 100kHz 0.7 1 MHz 17 100 mV BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 6 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Electrical Characteristics (Continued) Operating Conditions: VCC = +5V, TA= 25oC unless otherwise specified. Parameter Conditions Min Typ Max Unit 0.5 3 mV Op Amp 2 Section (VCC = 5V, VO = 1.4V, TA = 25oC, unless otherwise noted) Input Offset Voltage TA = 25oC TA = -40 to 105oC 5 Input Offset Voltage Temperature T = -40 to 105oC A Drift 7 V/oC Input Offset Current TA = 25oC 2 30 nA Input Bias Current TA = 25oC 20 150 nA Input Voltage Range VCC = 0 to 18V 0 VCC - 1.5 V Common Mode Rejection Ratio TA = 25oC, VCM = 0 to 3.5V 70 85 dB Large Signal Voltage Gain VCC = 15V, RL = 2k, VO = 1.4 to 11.4V 85 100 dB Power Supply Rejection Ratio VCC = 5 to 18V 70 90 d Output Current Source VCC = 15V, VID = 1V, VO = 2V 20 40 mA Sink VCC = 15V, VID = -1V, VO = 2V 10 20 mA Output Voltage Swing (High) VCC = 18, RL = 10k, VID = 1V 16 16.5 V Output Voltage SWing (Low) VCC = 18, RL = 10k, VID = -1V Slew Rate VCC = 18V, RL = 2k, AV = 1, VIN = 0.5 to 2V, CL = 100pF 0.2 0.5 V/ s Gain Bandwidth Product VCC = 18V, RL = 2k, CL = 100pF, VIN = 10mV, f=100kHz 0.7 1 MHz 17 100 mV BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 7 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Typical Performance Characteristics 2.510 2.610 2.505 Reference Voltage (V) Reference Voltage (V) 2.605 AP4300-A 2.600 2.595 2.590 2.500 AP4300-B 2.495 2.490 2.485 2.585 2.580 -40 -20 0 20 40 60 80 100 2.480 -40 120 -20 0 20 60 80 100 120 o Figure 6. Reference Voltage vs. Ambient Temperature Figure 7. Reference Voltage vs. Ambient Temperature 150 150 AZ4300-A VKA=VREF 100 Cathode Current (mA) Cathode Current (mA) 40 Ambient Temperature ( C) o Ambient Temperature ( C) 0 TA=25 C 50 0 AZ4300-B VKA=VREF 100 0 TA=25 C 50 0 -50 -50 -100 -2 -1 0 1 2 -100 -2 3 -1 0 1 2 3 Cathode Voltage (V) Cathode Voltage (V) Figure 8. Cathode Current vs. Cathode Voltage Figure 9. Cathode Current vs. Cathode Voltage 30 110 25 20 Voltage Gain(dB) Input Bias Current (nA) 100 15 10 80 RL=2K RL=20K 70 5 0 -40 90 -20 0 20 40 60 80 100 60 120 0 o 2 4 6 8 10 12 14 16 18 20 Supply Voltage (V) Ambient Temperature ( C) Figure10. Input Bias Current vs. Ambient Temperature Figure 11. Operational Amplifier Voltage Gain BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 8 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Typical Application R1 R6 Opto Isolator AC Line Battery Pack Op Amp 2 SMPS + R4 R3 Current R2 Sense R7 R5 Op Amp 2 + R8 AP4300 Figure 12. Application of AP4300 in a Constant Current and Constant Voltage Charger BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 9 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Mechanical Dimensions DIP-8 Unit: mm(inch) 0.700(0.028) 7.620(0.300)TYP 1.524(0.060) TYP 6 5 6 3.200(0.126) 3.600(0.142) 3.710(0.146) 4.310(0.170) 4 4 0.510(0.020)MIN 3.000(0.118) 3.600(0.142) 0.204(0.008) 0.360(0.014) 8.200(0.323) 9.400(0.370) 0.254(0.010)TYP 2.540(0.100) TYP 0.360(0.014) 0.560(0.022) 0.130(0.005)MIN 6.200(0.244) 6.600(0.260) R0.750(0.030) 3.000(0.118) Depth 0.100(0.004) 0.200(0.008) 9.000(0.354) 9.400(0.370) BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 10 Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE AP4300 Mechanical Dimensions (Continued) SOIC-8 Unit: mm(inch) 4.800(0.189) 5.000(0.197) 7 0.320(0.013) 1.350(0.053) 1.750(0.069) 8 8 7 0.675(0.027) 0.725(0.029) D 5.800(0.228) 1.270(0.050) 6.200(0.244) TYP D 20:1 0.300(0.012) R0.150(0.006) 0.100(0.004) 0.800(0.031) 0.200(0.008) 0 8 1.000(0.039) 3.800(0.150) 4.000(0.157) 1 5 0.330(0.013) 0.510(0.020) 0.900(0.035) R0.150(0.006) 0.190(0.007) 0.250(0.010) BCD Semiconductor Manufacturing Limited Apr. 2005 Rev. 1. 2 11 http://www.bcdsemi.com BCD Semiconductor Corporation 3170 De La Cruz Blvd, Suite # 105 Santa Clara, CA 95054-2411, U.S.A Tel: +1-408-988 6388, Fax: +1-408-988 6386 Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. 800 Yi Shan Road, Shanghai 200233, PRC Tel: +86-21-6485-1491, Fax: +86-21-5450-0008 Advanced Analog Circuits (Shanghai) Corporation 8F, B Zone, 900 Yi Shan Road, Shanghai 200233, PRC Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 BCD Semiconductor (Taiwan) Company Limited Room 2210, 22nd Fl, 333, Keelung Road, Sec. 1, TaiPei (110), Taiwan Tel: +886-2-2758 6828, Fax: +886-2-2758 6892 IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or other rights nor the rights of others.