Model RFP-50-XXAE Rev. B Flanged Attenuators 50 Watts General Specifications Resistive Element Substrate Cover Lead(s) Mounting Flange Operating Temperature Features: * DC - 2.5 GHz * 50 Watts * BeO Ceramic * Welded Silver Leads * Non-Nichrome Resistive Element Thick film Beryllium oxide ceramic Alumina Ceramic 99.99% pure Silver (.005" thk) Copper, Nickel plated per QQ-N-290 -55 to +150C (see chart) Electrical Specifications Attenuation Value: Power: Frequency Range: 1, 2, 3, 4, 5, 6, 9, 10, 20 or 30 dB 50 Watts DC - 2.5 GHz Notes: Tolerance is 0.010", unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Lead length 0.150" minimum.Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change without notice. * Low VSWR * 100% Tested Outline Drawing VER. 12/08/05 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-50-30AE Rev. B Specifications PART NUMBER ATTENUATION(dB) TOL. (dB) POWER (WATTS) VSWR FREQ (GHZ) RFP-50-1AE 1 0.75 50 1.50:1 2.0 RFP-50-2AE 2 0.50 50 1.30:1 2.0 RFP-50-3AE 3 0.50 50 1.30:1 2.0 RFP-50-4AE 4 0.50 50 1.20:1 2.0 RFP-50-5AE 5 0.50 50 1.20:1 2.0 RFP-50-6AE 6 0.50 50 1.20:1 2.0 RFP-50-9AE 9 0.50 50 1.20:1 2.0 RFP-50-10AE 10 0.50 50 1.25:1 2.0 RFP-50-20AE 20 0.50 50 1.20:1 2.5 RFP-50-30AE 30 0.50 50 1.20:1 1.7 Power Derating USA/Canada: Toll Free: Europe: Suggested Mounting Procedures (315) 432-8909 (800) 544-2414 +44 2392-232392