P R O D U C T B R I E F The XC161CJ is a new derivative of the popular C166 microcontroller family. Based on the enhanced C166S V2 architecture it outperforms existing 16-bit solutions. The XC161CJ is an improved and new-generation representative of the Infineon family of the full featured 16-bit single-chip CMOS microcontroller. It combines the extended functionality and performance of the C166S V2 Core with powerfull on-chip peripheral subsystems and on-chip Flash memory. The architecture of XC161CJ has been optimized for high instruction throughput and minimum response time to external interrupts. Intelligent peripheral systems have been integrated to reduce the need for CPU intervention. The high flexibility of this architecture allows to serve the diverse and varying needs of different application areas such as automotive, industrial control, or data communications. All this combined in a P-TQFP-144 package serves the requirements for highest system integration. Applications Automotive Dashboard Robotic Control Automotive Body Control Modules Car Radio Central Gateway Features High performance 16-bit C166S V2 CPU with 5-Stage Pipeline Single clock cycle instruction execution with 25 ns instruction time at 40 MHz CPU clock 25 ns multiplication (16 x 16 bit) time at 40 MHz CPU clock DSP support with Built-in advanced MAC unit 16 MByte total linear address space for code and data XC161CJ Flexible Synchronous External Bus Interface 16-Priority-Level Interrupt System on 8 group levels On-chip debug controller and related interface to JTAG controller Gated clock concept (function related) for reduced power consumption and improved EMC 8 KByte on Chip RAM 128 KByte advanced Program FlashMemory Flexible System Control and Power Management Real Time Clock with alarm interrupt 12-Channel 10-bit A/D Converter, conversion time < 3 s Two 16-channel Capture/Compare Units with 2 independent time bases each I 2C Bus module with 10-bit addressing and 400 Kbit/s Serial Data Link Module (SDLM), compliant with J1850 Two Multifunctional General Purpose Timer units Two Asynchronous/Synchronous Serial Channels (USART) Two High Speed Synchronous Serial Channels (SPI) TwinCAN module, two Full-CAN nodes with 32 message buffers and gateway function Up to 103 I/O Lines with individual bit addressability Package: P-TQFP-144 Plastic Thin Quad Flat Package Temperature Range: -40C to +125C Supply Voltage: - Core Supply: 2.5 V - Ports: 5.0 V X C 1 6 1 C J High End Performance N e v e r s t o p t h i n k i n g . P R O D U C T B R I E F XC161CJ Block Diagram DPRAM 2K IMB Start Up ROM 8K 2 x 16 64 SRAM 2K C166S V2 CPU 64 16 Trace Interface Injection Interface High Speed System Bus 16 TMC Emulator Interface (OCE) OCDS Cerberus JTAG CAP COM2 ADC Data Memory 4K DMU Break Interface Program Flash (with ECC) 128 K CAP COM1 16 PMU PMI PLL WDT Interrupt Controller and Peripheral Event Controller SCU CGU OSC RTC PD+ Bus 16 EBC LX Bus SSC1 SSC0 GPT12E ASC0 ASC1 SDLM I2C TwinCAN Config. Block External Bus Interface External Multiplexer Block 16 External Bus Ports Ports Type Order Code Package SAF-XC161CJ-16FF Q67127-C2357 P-TQFP-144 SAK-XC161CJ-16FF Q67127-C2296 P-TQFP-144 XC161CJ The best solution for automotive body and dashboard application How to reach us: http://www.infineon.com Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81541 Munchen (c) Infineon Technologies AG 2002. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide. Published by Infineon Technologies AG Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B158-H8011-X-X-7600 Printed in Germany PS 02023. NB