SPEC NO: DSAE2366 REV NO: V.8 DATE: APR/14/2010 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1101000374
2mmx5mm RECTANGULAR SOLID LAMP
Part Number: L-103HDT Bright Red
Features
zLow power consumption.
zReliable and rugged.
zExcellent uniformity of light output.
zSuitable for level indicator.
zLong life - solid state reliability.
zRoHS compliant.
Description
The Bright Red source color devices are made with Gallium
Phosphide Red Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAE2366 REV NO: V.8 DATE: APR/14/2010 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1101000374
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
L-103HDT Bright Red (GaP) RED DIFFUSED 0.4 1 110°
Iv (mcd) [2]
@ 10mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Bright Red 700 nm IF=20mA
λD [1] Dominant Wavelength Bright Red 660 nm IF=20mA
Δλ1/2 Spectral Line Half-width Bright Red 45 nm IF=20mA
C Capacitance Bright Red 40 pF VF=0V;f=1MHz
VF [2] Forward Voltage Bright Red 2.25 2.5 V IF=20mA
IR Reverse Current Bright Red 10 uA VR = 5V
Parameter Bright Red Units
Power dissipation 62.5 mW
DC Forward Current 25 mA
Peak Forward Current [1] 130 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAE2366 REV NO: V.8 DATE: APR/14/2010 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1101000374
Bright Red L-103HDT
SPEC NO: DSAE2366 REV NO: V.8 DATE: APR/14/2010 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1101000374
PACKING & LABEL SPECIFICATIONS L-103HDT
SPEC NO: DSAE2366 REV NO: V.8 DATE: APR/14/2010 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1101000374
SPEC NO: DSAE2366 REV NO: V.8 DATE: APR/14/2010 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1101000374