TRIAC(Through Hole / Non-isolated) TMG8C80 Triac TMG8C80 is designed for full wave AC control applications. It can be used as an ON/OFF function or for phase control operation. 2.98 0.44 TO-220AB 0.18 10.10 - 0.44 Typical Applications 2 1.27 0.12 0.87 15.00 - 0.57 1 3 3 .8 3 0.30 8.60 - 0.22 Home Appliances : Washing Machines, Vacuum Cleaners, Rice Cookers, Micro Wave Ovens, Hair Dryers, other control applications Industrial Use : SMPS, Copier Machines, Motor Controls, Dimmer, SSR, Heater Controls, Vending Machines, other control applications 0.2 4.5 - 0.1 2 Features IT(RMS)=8A High Surge Current Low Voltage Drop Lead-Free Package 4.23 0.5 13.5 0.8 2.48 0.45 1.27 0.13 0.85 0.1 1 2 3 2.54 0.15 0.45 - 0.1 2.54 Identifying CodeT8C8 Maximum Ratings Symbol VDRM ITRMS ITSM I2t PGM PGAV IGM VGM Tj Tstg 1 T1 2 T2 3 Gate Unitmm Tj=25 unless otherwise specified Item Repetitive Peak Off-State Voltage R.M.S. On-State Current Surge On-State Current I2tfor fusing Peak Gate Power Dissipation Average Gate Power Dissipation Peak Gate Current Peak Gate Voltage Operating Junction Temperature Storage Temperature Mass Reference Tc105 One cycle, 50Hz/60Hz, Peak value non-repetitive Ratings 800 8 80/88 32 5 0.5 2 10 -40125 -40150 2 Unit V A A A2S W W A V g Electrical Characteristics Symbol IDRM VTM I GT1 - I GT1 I GT3 - I GT3 V GT1 - V GT1 V GT3 - V GT3 VGD dv/dtc IH Rth Item Repetitive Peak Off-State Current Peak On-State Voltage 1 2 Gate Trigger Current 3 4 1 2 Gate Trigger Voltage 3 4 Non-Trigger Gate Voltage Reference Min. VD=VDRM, Single phase, half wave, Tj125 IT12A, Inst. measurement VD6VRL10 Ratings Typ. Max. 2 1.4 30 30 30 1.5 1.5 1.5 Unit mA V mA V Tj125VD12VDRM 0.2 V Critical Rate of Rise of Off-State Voltage at Commutation Tj125 di/dt c-4A/msVD400V 10 V/s Holding Current Thermal Resistance Junction to case 1 15 2 - 2.0 3 III mA /W 4 III - http://store.iiic.cc/ SanRex 50 Seaview Blvd. Port Washington, NY 11050 PH(516)625-1313 FX(516)625-8845 E-mail:semi@sanrex.com TMG8C80 Gate Characteristics On-State CharacteristicsMAX On-State Peak CurrentA Gate VoltageV VGM10V PGM5W IGM2A PGAV 0.5W 25 1GT 1-GT 1-GT VGD0.2V = = RMS On-State vs Maximum Power Dissipation Power DissipationW 9 7 2 Conduction Angle 3 30 60 90 HZ HZ Transient Thermal Impedance/W Surge On-State CurrentA . . . VGT -TjTypical VGTt x100 VGT IGTt x100 IGT TimeSec. IGT -TjTypical IGT 1 - I 1 GT - I-GT 3- - Transient Thermal Impedance TimeCycles RMS On-State CurrentA Surge On-State Current Rating Non-Repetitive 120 150 180 2 Conduction Angle RMS On-State CurrentA 1 5 RMS On-State vs Allowable Case Temperature Allowable Case Temperature On-State VoltageV Gate CurrentmA Junction Temp. Tj VGT 1 V-GT 1- - V GT 3- - Junction Temp. Tj SanRex 50 Seaview Blvd. Port Washington, NY 11050 PH(516)625-1313 FX(516)625-8845 E-mail:semi@sanrex.com http://store.iiic.cc/