Chip Beads For signal line MMZ series Type: MMZ0402 MMZ0603 MMZ1005 MMZ1608 MMZ2012 MMZ1005-E 0402[01005 inch]* 0603[0201 inch] 1005[0402 inch] 1608[0603 inch] 2012[0805 inch] 1005[0402 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 * All specifications are subject to change without notice. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/26) Chip Beads For Signal Line Conformity to RoHS Directive MMZ Series MMZ0402 APPLICATIONS Removal of signal line noises of cellular phones, portable audio players, various modules, etc. SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN 0.18 to 0.2 0.20.02 0.40.02 0.2 0.15 to 0.2 0.20.02 FEATURES * It is super small size(L0.4xW0.2xT0.2mm). * It prevents radiated noise from high-speed signal lines. * Maintain impedance to high frequency band. * Because it adopts silver in internal electrode, it is low DC resistance. * Because it is not generate of cross talk with closed magnetic circuit structural design, high density assembly is possible. * It is a product conforming to RoHS directive. 0.15 to 0.2 Weight: 0.08mg 0.08 to 0.14 Dimensions in mm TEMPERATURE RANGES Operating/storage -55 to +125C PRODUCT IDENTIFICATION MMZ 0402 S 121 C T (1) (2) (3) (4) (5) (6) (7) (1) Series name (2) Dimensions LxW (3) Type name (4) Impedance 121:120 at 100MHz (5) Characteristic type (6) Packaging style T: Taping (7) TDK internal code HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * Do not expose the inductors to stray magnetic fields. * Avoid static electricity discharge during handling. PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 20000 pieces/reel RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260C Natural cooling 230C 180C 150C Preheating 60 to 120s Soldering 30 to 60s Time(s) ELECTRICAL CHARACTERISTICS Part No. MMZ0402S100C MMZ0402S700C MMZ0402S121C Impedance ( )[100MHz] 105 7025% 12025% DC resistance ( )max. 0.10 0.45 0.70 Rated current (mA)max. 500 260 210 Test equipment: E4991A or equivalent Test tool: 16197 or equivalent Test temperature: 2510C * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (2/26) TYPICAL ELECTRICAL CHARACTERISTICS Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES) MMZ0402S SERIES 250 MMZ0402S121C Impedance () 200 MMZ0402S700C 150 MMZ0402S100C 100 50 0 1 10 100 1000 Frequency (MHz) 10000 Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ0402S100C MMZ0402S700C MMZ0402S121C 160 20 250 Z R 10 X 200 120 Z 100 80 R 60 40 5 Impedance () 15 Impedance () Impedance () 140 X Z 150 R 100 X 50 20 10 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) PACKAGING STYLES REEL DIMENSIONS 0 10000 1 10 100 1000 Frequency (MHz) 10000 TAPE DIMENSIONS Sprocket hole 1.5 +0.1 -0.0 Cavity 0.4max. 0.260.04 4.00.1 2.00.05 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. 160min. Taping 2.00.05 0.460.04 o60min. 8.00.2 1.0 3.50.05 1 1.750.1 0 200min. o210.8 o1802.0 Dimensions in mm Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (3/26) Chip Beads For Signal Line Conformity to RoHS Directive MMZ Series MMZ0603 APPLICATIONS Removal of signal line noises of cellular phones, portable audio players, various modules, DSCs, portable game machines, etc. PRODUCT IDENTIFICATION MMZ 0603 S 121 C T (1) (2) (3) (4) (5) (6) (7) (1) Series name (2) Dimensions LxW (3) Type name (4) Impedance 121:120 at 100MHz (5) Characteristic type (6) Packaging style T:Taping (7) TDK internal code HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * Do not expose the inductors to stray magnetic fields. * Avoid static electricity discharge during handling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. MATERIAL CHARACTERISTICS S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz. Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz. D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies. Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications. F material: This new product inherits the characteristic of our Dmaterial, namely its sharp impedance rise time, and its impedance peak frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in the GHz range. TYPICAL MATERIAL CHARACTERISTICS 2000 1800 D 1600 Impedance() FEATURES * This is a multilayered chip bead product with dimensions of L0.6xW0.3xT0.3mm. * The product is magnetically shielded, allowing high density mounting. * We refined the rules for internal conductor design to reduce floating capacity between conductors, which in turn has contributed to a dramatic improvement in high frequency characteristics. We have also been able to expand and reinforce the EMI suppression in the GHz range. * It is a product conforming to RoHS directive. Y 1400 1200 1000 S 800 F 600 400 200 0 10 100 Frequency(MHz) 1000 * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (4/26) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN 0.30 0.30.03 0.60.03 0.25 0.30 0.25 0.30.03 0.1min. Weight: 0.3mg Dimensions in mm TEMPERATURE RANGES Operating/storage -55 to +125C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 15000 pieces/reel ELECTRICAL CHARACTERISTICS Part No. MMZ0603S100C MMZ0603S800C MMZ0603S121C MMZ0603S241C MMZ0603S471C MMZ0603S601C MMZ0603Y121C MMZ0603Y241C MMZ0603Y471C MMZ0603Y601C MMZ0603D330C MMZ0603D560C MMZ0603D800C MMZ0603F100C MMZ0603F220C MMZ0603F330C DC resistance ( )max. 0.09 0.30 0.45 0.57 1.30 1.45 0.39 0.80 1.40 1.50 0.70 0.95 1.25 0.50 1.00 1.30 Impedance ()[100MHz] 105 8025% 12025% 24025% 47025% 60025% 12025% 24025% 47025% 60025% 3325% 5625% 8025% 105 2225% 3325% Rated current (mA)max. 500 200 200 200 100 100 200 200 200 200 100 100 100 200 200 150 Test equipment: E4991A or equivalent Test tool: 16197 or equivalent Test temperature: 2510C RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260C Natural cooling 230C 180C 150C Preheating 60 to 120s Soldering 30 to 60s Time(s) TYPICAL ELECTRICAL CHARACTERISTICS Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES) MMZ0603S SERIES MMZ0603Y SERIES 1 10 100 1000 Frequency (MHz) 1000 MMZ0603Y601C 900 MMZ0603Y471C 800 700 MMZ0603Y241C 600 MMZ0603Y121C 500 400 300 200 100 0 1 10 100 1000 Frequency (MHz) 900 800 10000 MMZ0603D800C 700 Impedance () Impedance () MMZ0603S601C MMZ0603S471C MMZ0603S241C MMZ0603S121C MMZ0603S800C MMZ0603S100C Impedance () 1000 900 800 700 600 500 400 300 200 100 0 MMZ0603D SERIES MMZ0603D560C 600 500 MMZ0603D330C 400 300 200 100 10000 0 1 10 100 1000 Frequency (MHz) 10000 MMZ0603F SERIES 1200 Impedance () 1000 MMZ0603F330C 800 MMZ0603F220C 600 MMZ0603F100C 400 200 0 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (5/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ0603S100C MMZ0603S800C 18 160 16 140 12 10 R 8 6 X 4 200 120 Z 100 R 80 60 40 Z 150 R 100 X 50 X 20 2 0 250 Impedance() Z Impedance() Impedance() 14 MMZ0603S121C 1 10 100 1000 Frequency (MHz) 0 10000 MMZ0603S241C 1 10 100 1000 Frequency (MHz) MMZ0603S471C 450 0 10000 1 10 100 1000 Frequency (MHz) 10000 MMZ0603S601C 1000 800 400 800 300 250 Z 200 R 150 X 100 600 Impedance() Impedance() Impedance() 350 Z R 400 200 600 Z R 400 X 200 X 50 0 1 10 100 1000 Frequency (MHz) 0 10000 MMZ0603Y121C 10 100 1000 Frequency (MHz) 0 10000 MMZ0603Y241C 150 R 100 X Z 300 X 0 0 1 10 100 1000 Frequency (MHz) R 200 100 10000 10000 700 400 50 100 1000 Frequency (MHz) 800 Impedance() Impedance() Z 10 900 500 200 1 MMZ0603Y471C 600 250 Impedance() 1 600 Z 500 R 400 300 X 200 100 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 MMZ0603Y601C 1000 Impedance() 800 600 Z R 400 X 200 0 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (6/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ0603D330C MMZ0603D560C Impedance() 300 R 200 Z 400 R 300 200 100 X 600 R 400 300 10 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) 0 10000 MMZ0603F220C 1200 250 600 1000 150 Impedance() 500 Z 400 R Z 300 100 200 X 50 R 10 100 1000 Frequency (MHz) 0 10000 1 X 10 100 1000 Frequency (MHz) PACKAGING STYLES REEL DIMENSIONS 10 100 1000 Frequency (MHz) 10000 800 600 Z 400 200 100 1 1 MMZ0603F330C 700 200 X 100 X 300 0 Z 500 0 10000 1 10 X 100 1000 Frequency (MHz) R 10000 TAPE DIMENSIONS Sprocket hole 1.5 +0.1 -0.0 Cavity 0.5max. 0.380.05 4.00.1 2.00.05 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. 160min. Taping 2.00.05 0.680.05 o60min. 8.00.3 1.0 3.50.05 1 MMZ0603F100C Impedance() 700 500 200 100 0 800 1.750.1 Z 900 600 Impedance() Impedance() 400 700 Impedance() 500 MMZ0603D800C 200min. o210.8 o1802.0 Dimensions in mm Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (7/26) Chip Beads For Signal Line Conformity to RoHS Directive MMZ Series MMZ1005 FEATURES * Size standardized for use by automatic assembly equipment. No preferred orientation. * Electroplated terminal electrodes accommodate reflow soldering. * High reliability due to an entirely monolithic structure. * Closed magnetic circuit structure allows high-density installation while preventing crosstalk between circuits. * Low DC resistance structure of electrode prevents wasteful electric power consumption. * It is a product conforming to RoHS directive. APPLICATIONS Removal of signal line noises of cellular phones, PCs, note PCs, TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game machines, digital photo frames, car navigation system, PNDs, etc. PRODUCT IDENTIFICATION MMZ 1005 S 121 C T (1) (2) (3) (4) (5) (6) (7) (1) Series name (2) Dimensions LxW (3) Type name (4) Impedance 121:120 at 100MHz (5) Characteristic type (6) Packaging style T:Taping (7) TDK internal code MATERIAL CHARACTERISTICS B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals. S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz. Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz. D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies. Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications. F material: This new product inherits the characteristic of our Dmaterial, namely its sharp impedance rise time, and its impedance peak frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in the GHz range. TYPICAL MATERIAL CHARACTERISTICS 2000 D 1800 Impedance() 1600 HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * Do not expose the inductors to stray magnetic fields. * Avoid static electricity discharge during handling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. Y 1400 1200 1000 F S 800 600 400 B 200 0 10 100 Frequency(MHz) 1000 * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (8/26) ELECTRICAL CHARCTERISTICS SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Part No. MMZ1005B800C MMZ1005B121C MMZ1005B601C MMZ1005S800C MMZ1005S121C MMZ1005S241C MMZ1005S601C MMZ1005S102C MMZ1005Y400C MMZ1005Y800C MMZ1005Y121C MMZ1005Y241C MMZ1005Y301C MMZ1005Y471C MMZ1005Y601C MMZ1005Y102C MMZ1005Y152C MMZ1005D100C MMZ1005D220C MMZ1005D330C MMZ1005D680C MMZ1005D121C MMZ1005D241C MMZ1005F330C MMZ1005F470C MMZ1005F560C 0.5 0.50.05 10.05 0.5 0.4 0.5 0.50.05 0.1min. Weight: 1mg Dimensions in mm TEMPERATURE RANGES Operating/storage -55 to +125C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 10000 pieces/reel RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260C Natural cooling 230C 180C Impedance ()[100MHz] 8025% 12025% 60025% 8025% 12025% 24025% 60025% 100025% 4025% 8025% 12025% 24025% 30025% 47025% 60025% 100025% 150025% 105 2225% 3325% 6825% 12025% 24025% 3325% 4725% 5625% DC resistance ( )max. 0.19 0.25 0.85 0.12 0.22 0.28 0.52 0.75 0.10 0.17 0.18 0.26 0.38 0.47 0.54 0.70 1.00 0.10 0.17 0.24 0.38 0.60 0.90 0.50 0.60 0.70 Rated current (mA)max. 450 400 200 500 500 400 300 200 550 450 400 300 250 250 250 200 100 500 400 400 400 350 200 200 100 100 Test equipment: E4991A or equivalent Test tool: 16192A or equivalent Test temperature: 2510C 150C Preheating 60 to 120s Soldering 30 to 60s Time(s) TYPICAL ELECTRICAL CHARACTERISTICS Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES) MMZ1005B SERIES MMZ1005S SERIES 800 MMZ1005S102C 1200 MMZ1005S601C MMZ1005S241C 1000 MMZ1005S121C MMZ1005S800C 400 300 200 0 10000 MMZ1005D SERIES 600 400 200 0 1 10 100 1000 Frequency (MHz) 10000 1 10 100 1000 Frequency (MHz) 10000 1200 MMZ1005D241C 2500 MMZ1005F560C 1000 2000 Impedance () Impedance () 800 MMZ1005F SERIES 3000 MMZ1005D121C MMZ1005D680C 1500 MMZ1005D330C 1000 MMZ1005D220C MMZ1005D100C 500 0 1000 400 0 100 1000 Frequency (MHz) 1200 600 200 10 1400 800 100 MMZ1005Y152C MMZ1005Y102C MMZ1005Y601C MMZ1005Y471C MMZ1005Y301C MMZ1005Y241C MMZ1005Y121C MMZ1005Y800C MMZ1005Y400C 1600 Impedance () Impedance () Impedance () MMZ1005B121C 600 MMZ1005B800C 500 1 1800 1400 MMZ1005B601C 700 MMZ1005Y SERIES 800 MMZ1005F470C 600 MMZ1005F330C 400 200 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (9/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1005B800C MMZ1005B121C 100 Impedance() Impedance() Z 80 R 60 40 0 180 800 160 700 140 600 120 R 100 X 20 MMZ1005B601C Impedance() 120 Z 80 60 10 100 1000 Frequency (MHz) 0 10000 MMZ1005S800C 1 10 100 1000 Frequency (MHz) 0 10000 MMZ1005S121C 160 80 R 60 1 10 100 1000 Frequency (MHz) 10000 Z 100 R X 300 250 200 Z R 150 100 X 50 100 1000 Frequency (MHz) 0 10000 MMZ1005S601C 1 10 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) 10000 MMZ1005S102C 900 1400 800 1200 700 1000 Impedance() 600 R 500 Z 400 300 200 600 400 200 0 1 10 100 1000 Frequency (MHz) 10000 MMZ1005Y400C 160 70 140 Impedance() 60 Z R 40 30 20 10 10 10000 100 1000 Frequency (MHz) MMZ1005Y121C 250 200 120 100 Z 80 R 60 10000 0 1 10 100 1000 Frequency (MHz) Z 150 R 100 X 50 X 20 1 100 1000 Frequency (MHz) 40 X 10 1 MMZ1005Y800C 80 50 R X X 100 Z 800 Impedance() Impedance() 150 50 X 20 Impedance() Impedance() Impedance() Z 40 Impedance() 10 350 200 100 0 1 400 250 120 0 X MMZ1005S241C 140 0 R 300 100 20 1 Z 400 200 X 40 500 10000 0 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (10/26) 600 400 500 Z 300 R 200 800 700 400 Z 300 R 200 1 10 100 1000 Frequency (MHz) 0 10000 1 1200 10 100 1000 Frequency (MHz) 300 0 10000 X 1 10 100 1000 Frequency (MHz) 10000 MMZ1005Y152C 1800 1600 1400 800 Z 600 R 400 Z 800 600 400 X 10 100 1000 Frequency (MHz) 0 10000 MMZ1005D100C 1 10 100 1000 Frequency (MHz) 1 10 100 1000 Frequency (MHz) 10000 300 250 X 20 150 Z Impedance() Impedance() R 30 X MMZ1005D330C Z 50 40 600 0 10000 200 60 800 200 MMZ1005D220C 70 R 400 200 1 Z 1200 R 1000 X 200 Impedance() 1000 Impedance() Impedance() 1000 Impedance() R 200 MMZ1005Y102C 1400 0 Z 400 100 1200 R 100 X 50 200 Z 150 R 100 X 50 10 10 100 1000 Frequency (MHz) 0 10000 1 100 1000 Frequency (MHz) 500 800 Impedance() 1000 400 Z R 300 200 10 100 1000 Frequency (MHz) 100 1000 Frequency (MHz) 10000 2500 Z 2000 R 600 Z R 1500 400 1000 500 X 10000 10 3000 X 1 1 MMZ1005D241C 200 100 0 10000 MMZ1005D121C 600 0 10 Z, X, R () 1 MMZ1005D680C Impedance() 500 100 MMZ1005Y601C 0 600 X X 100 0 MMZ1005Y471C Impedance() 500 Impedance() Impedance() TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1005Y241C MMZ1005Y301C 0 1 10 100 1000 Frequency (MHz) 10000 0 1 10 X 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (11/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1005F330C MMZ1005F470C 1000 900 800 700 600 500 400 300 200 100 500 Z 300 200 100 R 1 0 10000 Z R 800 600 Z 400 R 200 1 X 10 100 1000 Frequency (MHz) PACKAGING STYLES REEL DIMENSIONS 0 10000 X 10 100 1000 Frequency (MHz) 1 10000 TAPE DIMENSIONS Sprocket hole 1.5 +0.1 -0.0 Cavity 0.8max. 0.650.1 4.00.1 2.00.05 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. 160min. Taping 2.00.05 1.150.1 o60min. 8.00.3 1.0 3.50.05 0 X 10 100 1000 Frequency (MHz) 1000 1.750.1 400 1200 Impedance() Impedance() 600 Impedance() 700 MMZ1005F560C 200min. o210.8 o1802.0 Dimensions in mm Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (12/26) Chip Beads For Signal Line Conformity to RoHS Directive MMZ Series MMZ1608 SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN 0.8 0.80.15 1.60.15 0.6 0.30.2 0.8 Thickness(T) 0.60.15mm 0.80.15mm T FEATURES * Chip bead(impeder), MMZ series offers 8 construction materials. * Size standardized for use by automatic assembly equipment. No preferred orientation. * Either flow or reflow soldering methods can be used due to electroplating of the terminal electrodes. * High reliability due to an entirely monolithic structure. * Closed magnetic circuit structure allows high-density installation while preventing crosstalk between circuits. * Low DC resistance structure of electrode prevents wasteful electric power consumption. * The products contain no lead and also support lead-free soldering. * It is a product conforming to RoHS directive. 0.6 Weight 3mg 4mg Dimensions in mm TEMPERATURE RANGES Operating/storage -55 to +125C PACKAGING STYLE AND QUANTITIES APPLICATIONS Removal of signal line noises of cellular phones, PCs, note PCs, TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game machines, digital photo frames, car navigation system, PNDs, etc. Packaging style Taping Quantity 4000 pieces/reel RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING PRODUCT IDENTIFICATION MMZ 1608 R 121 A T (1) (2) (3) (4) (5) (6) 10s max. (7) 250 to 260C Natural cooling 230C (1) Series name (2) Dimensions LxW (3) Type name (4) Impedance 121:120 at 100MHz (5) Characteristic type (6) Packaging style T:Taping (7) TDK internal code 180C 150C Preheating 60 to 120s Soldering 30 to 60s Time(s) HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * Do not expose the inductors to stray magnetic fields. * Avoid static electricity discharge during handling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (13/26) MATERIAL CHARACTERISTICS B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals. R material: For wide frequency applications calling for broad impedance characteristics. For digital signal line applications calling requiring good waveform integrity. Impedance values selected for effectiveness at 10 to 200MHz. S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz. Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz. A material: This high-impedance product is based on the impedance frequency characteristics of our Y-material. The product offers excellent impedance characteristics, which is greater than 2500, in the vicinity of 100MHz range (MMZ1608A252B). Q material:For high-band applications designed for 100MHz and above. Impedance values selected for effectiveness at 100 to 800MHz. D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies. Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications. F material: This new product inherits the characteristic of our D-material, namely its sharp impedance rise time, and its impedance peak frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in the GHz range. TYPICAL MATERIAL CHARACTERISTICS 2500 A Impedance() 2000 D F Y Q 1500 1000 R 500 S B Part No. MMZ1608B121C MMZ1608B221C MMZ1608B301C MMZ1608B471C MMZ1608B601C MMZ1608B102C MMZ1608R150A MMZ1608R300A MMZ1608R600A MMZ1608R121A MMZ1608R301A MMZ1608R471A MMZ1608R601A MMZ1608R102A MMZ1608S400A MMZ1608S800A MMZ1608S121A MMZ1608S181A MMZ1608S221A MMZ1608S301A MMZ1608S471A MMZ1608S601A MMZ1608S102A MMZ1608S202A MMZ1608Y150B MMZ1608Y300B MMZ1608Y600B MMZ1608Y121B MMZ1608Y221B MMZ1608Y301B MMZ1608Y471B MMZ1608Y601B MMZ1608Y751B MMZ1608Y102B MMZ1608Y152B MMZ1608A182B MMZ1608A222B MMZ1608A252B MMZ1608Q121B MMZ1608Q221B MMZ1608Q331B MMZ1608Q471B MMZ1608Q601B MMZ1608Q102B MMZ1608D050C MMZ1608D100C MMZ1608D220C MMZ1608D500C MMZ1608D800C MMZ1608D800B MMZ1608D121C MMZ1608D121B MMZ1608D241C MMZ1608D301B MMZ1608F030B MMZ1608F470B MMZ1608F750B MMZ1608F121B 0 10 ELECTRICAL CHARACTERISTICS 100 Frequency(MHz) 1000 Impedance ( ) [100MHz] 12025% 22025% 30025% 47025% 60025% 100025% 1525% 3025% 6025% 12025% 30025% 47025% 60025% 100025% 4025% 8025% 12025% 18025% 22025% 30025% 47025% 60025% 100025% 200025% 1525% 3025% 6025% 12025% 22025% 30025% 47025% 60025% 75025% 100025% 150025% 180025% 220025% 250025% 12025% 22025% 33025% 47025% 60025% 100025% 52 105 2225% 5025% 8025% 8025% 12025% 12025% 24025% 30025% 3typ. 4725% 7525% 12025% Rated DC resistance current ()max. (mA)max. 0.15 600 0.25 500 0.25 500 0.30 500 0.40 500 0.60 300 0.05 1500 0.05 1500 0.10 800 0.18 500 0.25 500 0.30 500 0.40 500 0.50 400 0.10 600 0.15 500 0.15 500 0.20 500 0.20 500 0.30 500 0.30 500 0.35 500 0.50 400 0.90 200 0.05 1500 0.05 1500 0.15 500 0.20 500 0.30 500 0.30 500 0.35 500 0.40 500 0.45 500 0.50 400 0.60 300 0.80 200 0.80 200 0.80 200 0.30 500 0.40 500 0.50 400 0.70 300 0.80 200 1.00 200 0.05 700 0.10 500 0.20 500 0.25 500 0.30 500 0.30 500 0.30 400 0.30 400 0.60 300 0.70 300 0.05 700 0.40 500 0.55 300 0.75 200 Product's thickness T(mm) 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Test equipment: E4991A or equivalent Test tool: 16192A or equivalent Test temperature: 2510C * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (14/26) MMZ1608B301C 160 300 350 140 250 300 Z 100 R 80 60 250 Impedance() 120 Impedance() Impedance() TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1608B121C MMZ1608B221C 200 Z 150 R 100 20 0 50 1 10 100 1000 Frequency (MHz) MMZ1608B471C 100 100 1000 Frequency (MHz) 0 10000 500 600 1000 400 Z 300 R 200 Z 400 R 300 100 1000 Frequency (MHz) 200 0 10000 1 10 R Z Impedance() 15 R 100 1000 Frequency (MHz) 10 5 0 10000 90 35 80 30 70 Z R 20 15 10 X 1 10 100 1000 Frequency (MHz) 10000 MMZ1608R121A 50 Z 30 X 1 10 100 1000 Frequency (MHz) 0 10000 1 300 500 100 250 60 40 Z R 150 100 X X 20 0 Impedance() 120 Impedance() 600 200 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 100 1000 Frequency (MHz) 400 Z 300 R 200 X 100 50 1 10 MMZ1608R471A 350 R R 40 10 MMZ1608R301A Z 10000 60 140 80 100 1000 Frequency (MHz) 20 X 5 0 10 MMZ1608R600A 40 25 X 200 MMZ1608R300A 20 10000 Z 400 Impedance() 10 100 1000 Frequency (MHz) 600 X X 10 800 100 MMZ1608R150A 0 Impedance() 1200 500 1 MMZ1608B102C 700 0 Impedance() 10 MMZ1608B601C 100 Impedance() 1 X 50 X 600 Impedance() Impedance() 0 10000 R 150 40 X Z 200 10000 0 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (15/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1608R601A MMZ1608R102A 600 Z 400 R 300 200 1200 60 1000 50 Impedance() 1 10 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) 0 10000 60 40 X 10 100 1000 Frequency (MHz) 120 R 100 Z 80 60 0 10000 MMZ1608S221A X 10 100 1000 Frequency (MHz) 150 100 250 Z 200 R 150 X 100 10 100 1000 Frequency (MHz) 0 10000 MMZ1608S601A 1 10 100 1000 Frequency (MHz) Z R 200 X 1 3000 600 1200 2500 1000 Impedance() R 300 200 0 1 10 100 1000 Frequency (MHz) R 600 400 X X 100 Z 800 0 1 10 100 1000 Frequency (MHz) 10000 100 1000 Frequency (MHz) 2000 Z 1500 10000 R 1000 X 500 200 10000 10 MMZ1608S202A 1400 400 10000 300 700 Z 100 1000 Frequency (MHz) 400 0 10000 MMZ1608S102A 500 10 100 X 50 1 X 500 300 50 100 R 600 Impedance() Impedance() R Z 150 MMZ1608S471A 350 Z 200 0 10000 400 200 0 1 450 250 10000 50 MMZ1608S301A 300 100 1000 Frequency (MHz) 250 20 1 10 300 40 20 1 MMZ1608S181A Impedance() Impedance() R X 10 140 Z Impedance() 20 160 80 R 30 180 100 Impedance() X MMZ1608S121A 120 Impedance() R 400 Z 40 200 MMZ1608S800A 0 Z 600 X 100 0 800 Impedance() Impedance() 500 MMZ1608S400A Impedance() 700 0 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (16/26) MMZ1608Y600B 60 120 20 50 100 Z 15 R 10 Z 30 R 20 X 5 0 40 Impedance() 25 Impedance() Impedance() TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1608Y150B MMZ1608Y300B 10 100 1000 Frequency (MHz) 0 10000 MMZ1608Y121B Z 60 1 10 100 1000 Frequency (MHz) 0 10000 R 100 250 200 R 150 1 10 100 1000 Frequency (MHz) X 0 10000 MMZ1608Y471B 1 10 100 1000 Frequency (MHz) R X 1 10 100 1000 Frequency (MHz) 10000 1000 800 800 Impedance() 500 R 400 Z 300 200 X 600 Z 500 R 400 300 X 200 100 Impedance() 700 Impedance() Z 200 MMZ1608Y751B 900 600 0 300 0 10000 MMZ1608Y601B 700 10000 400 100 50 X 0 Z 100 50 100 1000 Frequency (MHz) 500 300 Impedance() Impedance() Impedance() Z 10 600 350 150 1 MMZ1608Y301B 400 200 X 20 MMZ1608Y221B 250 R 40 X 10 1 80 Z 600 R 400 X 200 100 1 10 100 1000 Frequency (MHz) 0 10000 MMZ1608Y102B 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 MMZ1608Y152B 1400 1800 1200 1600 1400 Impedance() Impedance() 1000 1200 Z 800 600 400 0 R 800 600 400 X 200 Z 1000 R X 200 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (17/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1608A182B MMZ1608A222B MMZ1608A252B 3000 2500 2000 R 2000 Z R 1500 1000 Impedance() Impedance() Impedance() 2500 2000 Z 1500 1500 1000 X 500 Z 1000 X 500 X 500 R 1 10 100 1000 Frequency (MHz) 350 600 300 500 250 Z R 200 150 100 1 10 100 1000 Frequency (MHz) 100 1000 Frequency (MHz) Z R 1 10 100 1000 Frequency (MHz) R 500 400 300 X 10 100 1000 Frequency (MHz) 10000 MMZ1608Q102B 2000 1200 Impedance() Impedance() 1000 800 R 600 400 200 10 100 1000 Frequency (MHz) 0 Impedance() 20 Z R X 10 5 100 1000 Frequency (MHz) 10000 1500 Z R 1000 500 X X 0 1 10 100 1000 Frequency (MHz) 10000 MMZ1608D100C 25 10 400 10000 30 15 600 80 160 70 140 60 120 50 Z 40 R 30 X 10000 20 100 1000 Frequency (MHz) 10000 Z R 60 40 10 100 1000 Frequency (MHz) 80 10 1 10 100 20 0 1 MMZ1608D220C Impedance() 1 Z R 800 200 X MMZ1608D050C 1 Z 600 0 1 10000 Z 0 10000 100 1400 1000 0 100 1000 Frequency (MHz) 200 X MMZ1608Q601B 1200 10 700 200 10000 1 800 300 0 0 10000 MMZ1608Q331B 100 MMZ1608Q471B Impedance() 10 400 X 50 0 1 MMZ1608Q221B Impedance() Impedance() MMZ1608Q121B Impedance() 0 10000 Impedance() 0 0 X 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (18/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1608D500C MMZ1608D800C R 200 X 100 1 10 100 1000 Frequency (MHz) 400 Z R 300 200 X 0 1 700 700 600 600 Impedance() 800 R 400 300 200 0 100 1000 Frequency (MHz) 10000 MMZ1608D301B R X 10000 800 Z R 600 400 200 X 1 10 100 1000 Frequency (MHz) 0 10000 Impedance() Impedance() 2000 1500 1000 R R 20 X 15 10 600 500 400 300 Z MMZ1608F750B 100 0 1 10000 10000 700 25 5 X 100 1000 Frequency (MHz) 800 Z 200 500 100 1000 Frequency (MHz) 10 900 30 2500 1 MMZ1608F470B 35 10 100 1000 Frequency (MHz) 1000 Z MMZ1608F030B 3000 1 10 1200 300 0 Z 1 MMZ1608D241C 400 100 0 10000 X 200 X 10 100 1000 Frequency (MHz) 500 100 1 10 Z 200 0 MMZ1608D121B Z R 300 100 800 500 400 100 10000 MMZ1608D121C Impedance() 500 Impedance() 0 500 Impedance() Z 600 Impedance() Impedance() 300 Impedance() 400 MMZ1608D800B 600 10 100 1000 Frequency (MHz) 10000 0 R 1 10 X 100 1000 Frequency (MHz) 10000 MMZ1608F121B 6000 2000 5000 Impedance() Impedance() 1500 1000 4000 3000 2000 500 R 1000 Z Z R 0 1 X 10 100 1000 Frequency (MHz) 10000 0 1 10 X 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (19/26) PACKAGING STYLES REEL DIMENSIONS 1.5 +0.1 -0.0 Cavity 1.1max. 1.10.2 4.00.1 4.00.1 2.00.05 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. 160min. Taping 1.90.2 o60min. 8.00.3 1.0 3.50.05 Sprocket hole 1.750.1 TAPE DIMENSIONS 200min. o210.8 o1802.0 Dimensions in mm Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (20/26) Chip Beads For Signal Line Conformity to RoHS Directive MMZ Series MMZ2012 FEATURES * Chip bead(impeder), MMZ series offers 4 construction materials. * Size standardized for use by automatic assembly equipment. No preferred orientation. * Either flow or reflow soldering methods can be used due to electroplating of the terminal electrodes. * High reliability due to an entirely monolithic structure. * Closed magnetic circuit structure allows high-density installation while preventing crosstalk between circuits. * Low DC resistance structure of electrode prevents wasteful electric power consumption. * The products contain no lead and also support lead-free soldering. * It is a product conforming to RoHS directive. APPLICATIONS Removal of signal line noises of cellular phones, PCs, note PCs, TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game machines, digital photo frames, car navigation system, PNDs, etc. MATERIAL CHARACTERISTICS R material: For wide frequency applications calling for broad impedance characteristics. For digital signal line applications calling requiring good waveform integrity. Impedance values selected for effectiveness at 10 to 200MHz. S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz. Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz. D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies. Designed for high impedance at high frequencies (200 to 500MHz) for signal line applications. PRODUCT IDENTIFICATION TYPICAL MATERIAL CHARACTERISTICS (7) (1) Series name (2) Dimensions LxW (3) Type name (4) Impedance 121:120 at 100MHz (5) Characteristic type (6) Packaging style T:Taping (7) TDK internal code 2500 2000 Impedance() MMZ 2012 R 121 A T (1) (2) (3) (4) (5) (6) Y 1500 1000 500 0 10 D S R 100 Frequency(MHz) 1000 HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * Do not expose the inductors to stray magnetic fields. * Avoid static electricity discharge during handling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (21/26) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN ELECTRICAL CHARACTERISTICS MMZ2012R150A MMZ2012R300A MMZ2012R600A MMZ2012R121A MMZ2012R301A MMZ2012R601A MMZ2012R102A MMZ2012S400A MMZ2012S800A MMZ2012S121A MMZ2012S181A MMZ2012S301A MMZ2012S601A MMZ2012S102A MMZ2012Y150B MMZ2012Y300B MMZ2012Y600B MMZ2012Y121B MMZ2012Y301B MMZ2012Y601B MMZ2012Y102B MMZ2012Y152B MMZ2012Y202B MMZ2012D800B MMZ2012D121B MMZ2012D301B 1.2 1.250.2 0.8 1 0.8 0.850.2 0.50.3 Weight: 8mg Dimensions in mm TEMPERATURE RANGES Operating/storage -55 to +125C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 4000 pieces/reel RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260C Natural cooling 230C 180C 150C Preheating 60 to 120s Impedance ()[100MHz] 1525% 3025% 6025% 12025% 30025% 60025% 100025% 4025% 8025% 12025% 18025% 30025% 60025% 100025% 1525% 3025% 6025% 12025% 30025% 60025% 100025% 150025% 200025% 8025% 12025% 30025% Part No. 20.2 DC resistance ( )max. 0.05 0.05 0.10 0.12 0.15 0.20 0.30 0.10 0.10 0.15 0.15 0.20 0.30 0.35 0.05 0.05 0.10 0.12 0.15 0.20 0.30 0.40 0.50 0.30 0.30 0.50 Rated current (mA)max. 1500 1500 1000 800 600 500 500 1000 800 800 600 600 500 500 1500 1500 1000 800 600 500 500 500 400 500 500 400 Test equipment: E4991A or equivalent Test tool: 16192A or equivalent Test temperature: 2510C Soldering 30 to 60s Time(s) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ2012R150A MMZ2012R300A 15 Z Impedance() Impedance() 20 R 10 90 35 80 30 70 25 Z 20 R 15 10 X 5 40 Impedance() 25 MMZ2012R600A 10 100 1000 Frequency (MHz) 0 1 10000 MMZ2012R121A 50 30 10 100 1000 Frequency (MHz) 0 1 10000 300 600 100 250 60 40 X 20 0 1 Z 200 R 150 100 50 10 100 1000 Frequency (MHz) Impedance() 120 Impedance() 700 Impedance() 350 R 10000 0 1 100 1000 Frequency (MHz) 10000 100 1000 Frequency (MHz) 500 Z 400 R 300 200 100 X 10 10 MMZ2012R601A 140 80 X 10 MMZ2012R301A Z R Z 40 20 X 5 0 1 60 10000 0 1 X 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (22/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ2012R102A MMZ2012S400A MMZ2012S800A 1000 50 120 800 Z R 600 400 200 100 1000 Frequency (MHz) 100 1000 Frequency (MHz) Impedance() 100 Z 80 R 60 X 40 100 1000 Frequency (MHz) MMZ2012S601A R 150 Z 100 250 100 0 1 10 100 1000 Frequency (MHz) 0 1 10000 10 Impedance() 100 1000 Frequency (MHz) Z MMZ2012Y300B 400 100 Impedance() 40 Z R 20 R 10 X 100 1000 Frequency (MHz) 0 1 10000 10 100 1000 Frequency (MHz) 10000 MMZ2012Y121B 200 80 Z 60 R 40 X X 10 Z 5 MMZ2012Y600B 120 0 1 10 10000 15 X 0 1 50 30 R 600 10000 100 1000 Frequency (MHz) 20 Impedance() 0 1 800 200 100 Impedance() 25 X 10 MMZ2012Y150B 1000 200 X 50 600 300 R 150 30 Z Z 200 1200 400 10000 300 700 R 100 1000 Frequency (MHz) 350 MMZ2012S102A 500 10 400 200 10000 X 450 50 10 40 MMZ2012S301A X 20 Z 60 0 1 250 120 R 80 10000 300 140 Impedance() 10 100 20 X MMZ2012S181A 160 Impedance() 20 0 1 180 Impedance() R 10000 MMZ2012S121A 0 1 Z 30 10 X 10 40 Impedance() 0 1 Impedance() 140 Impedance() 60 Impedance() 1200 150 Z R 100 X 50 20 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (23/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ2012Y301B MMZ2012Y601B 600 R 300 Z 200 Z 500 R 400 300 200 X 100 Impedance() 400 1000 600 Impedance() X 100 1000 Frequency (MHz) 0 10000 MMZ2012Y152B 1 10 100 1000 Frequency (MHz) 600 X 400 R 1500 Z 1000 X 500 10 100 1000 Frequency (MHz) 0 1 10000 MMZ2012D121B 300 200 Z 10 100 1000 Frequency (MHz) R 0 1 10000 10 X 100 1000 Frequency (MHz) 10000 4500 4000 1000 3500 Impedance() 800 600 400 Z 10 2500 2000 1500 1000 200 R 3000 100 1000 Frequency (MHz) R Z 500 X 0 1 10000 X 10 PACKAGING STYLES REEL DIMENSIONS 100 1000 Frequency (MHz) 10000 TAPE DIMENSIONS Sprocket hole 1.5 +0.1 -0.0 Cavity 1.1max. 1.50.2 4.00.1 4.00.1 2.00.05 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. 160min. Taping 2.30.2 o60min. 8.00.3 1.0 3.50.05 Impedance() 400 MMZ2012D301B 1200 0 1 500 100 200 0 1 10000 600 Impedance() Impedance() Impedance() R Z 800 100 1000 Frequency (MHz) 700 2000 1000 10 MMZ2012D800B 2500 1200 X 0 1 1600 1400 R 400 10000 MMZ2012Y202B 1800 Z 600 200 100 10 800 1.750.1 Impedance() 1200 700 500 0 1 MMZ2012Y102B 800 200min. o210.8 o1802.0 Dimensions in mm Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (24/26) Chip Beads For Signal Line Conformity to RoHS Directive MMZ Series MMZ1005-E FEATURES * Compared with the existing MMZ1005 type, this new product has broad-band impedance values for higher frequency ranges. * Size standardized for use by automatic assembly equipment. No preferred orientation. * Electroplated terminal electrodes accommodate reflow soldering. * High reliability due to an entirely monolithic structure. * Closed magnetic circuit structure allows high-density installation while preventing crosstalk between circuits. * Low DC resistance structure of electrode prevents wasteful electric power consumption. * It is a product conforming to RoHS directive. APPLICATIONS Removal of signal line noises of cellular phones, PCs, note PCs, TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game machines, digital photo frames, car navigation system, PNDs, etc. PRODUCT IDENTIFICATION MMZ 1005 S 601 E T (1) (2) (3) (4) (5) (6) (7) (1) Series name (2) Dimensions LxW (3) Type name (4) Impedance 601:600 at 100MHz (5) Characteristic type (6) Packaging style T:Taping (7) TDK internal code PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 10000 pieces/reel TEMPERATURE RANGES Operating/storage -55 to +125C SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN 0.5 0.50.05 10.05 0.5 0.4 0.5 0.50.05 0.1min. Weight: 1mg Dimensions in mm ELECTRICAL CHARACTERISTICS Impedance() Part No. MMZ1005S601E MMZ1005S102E MMZ1005S182E MMZ1005A601E MMZ1005A102E MMZ1005A152E MMZ1005A182E MMZ1005A222E MMZ1005D121E MMZ1005D221E MMZ1005F470E MMZ1005F750E MMZ1005F121E [100MHz] [1GHz] 60025% 100025% 180025% 60025% 100025% 150025% 180025% 220025% 12025% 22025% 4725% 7525% 12025% 100040% 140040% 180040% 140040% 200040% 230040% 270040% 300040% 100040% 170040% 80040% 150040% 230040% DC resistance ()max. 0.65 1.00 1.50 0.80 1.20 1.60 2.10 2.20 0.70 1.00 0.70 1.00 1.50 Rated current (mA)max. 300 250 200 300 250 230 200 150 300 250 300 250 200 HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * Do not expose the inductors to stray magnetic fields. * Avoid static electricity discharge during handling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260C Natural cooling 230C 180C 150C Preheating 60 to 120s Soldering 30 to 60s Time(s) Test equipment: E4991A or equivalent Test tool: 16192A or equivalent Test temperature: 2510C * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (25/26) TYPICAL ELECTRICAL CHARACTERISTICS Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES) MMZ1005S-E SERIES MMZ1005A-E SERIES MMZ1005S182E MMZ1005S102E 2000 Impedance () Impedance () 2500 MMZ1005S601E 1500 1000 500 0 1 10 100 1000 Frequency (MHz) 10000 5000 MMZ1005A222E 4500 MMZ1005A182E 4000 MMZ1005A152E 3500 MMZ1005A102E 3000 MMZ1005A601E 2500 2000 1500 1000 500 0 1 10 100 1000 Frequency (MHz) Impedance () 3000 MMZ1005D-E SERIES 10000 2000 1800 1600 1400 1200 1000 800 600 400 200 0 MMZ1005D221E MMZ1005D121E 1 10 100 1000 Frequency (MHz) 10000 MMZ1005F-E SERIES 3000 MMZ1005F121E Impedance () 2500 MMZ1005F750E 2000 MMZ1005F470E 1500 1000 500 0 1 10 100 1000 Frequency (MHz) 10000 Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1005S601E MMZ1005S102E 1000 MMZ1005S182E 3000 1600 1400 2500 1200 Z Impedance() Z Impedance() Impedance() 800 1000 600 R 400 800 600 X 200 R X 1 10 100 1000 Frequency (MHz) 0 10000 MMZ1005A601E 1 10 100 1000 Frequency (MHz) 500 X 1 10 100 1000 Frequency (MHz) 10000 R 1500 1000 10000 0 1 10 100 1000 Frequency (MHz) X 500 X 200 0 2000 R 1000 600 100 1000 Frequency (MHz) Z Impedance() Z 1500 R 10 2500 Impedance() Impedance() Z 1 3000 2000 1200 X MMZ1005A152E 2500 400 1000 0 10000 1400 800 Z 500 MMZ1005A102E 1600 1000 R 1500 400 200 0 2000 10000 0 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz (26/26) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ1005A182E MMZ1005A222E 3500 4500 3000 4000 Impedance() Impedance() 3500 2500 Z 2000 R 1500 1000 0 2500 R 2000 1500 1000 X 500 Z 3000 X 500 1 10 100 1000 Frequency (MHz) 0 10000 MMZ1005D121E 1 10 100 1000 Frequency (MHz) 10000 MMZ1005D221E 1200 2000 1000 Impedance() Impedance() 1500 800 Z 600 R 400 Z R 1000 500 X 200 X 1 10 100 1000 Frequency (MHz) 0 10000 MMZ1005F470E 100 1000 Frequency (MHz) 10000 MMZ1005F121E 3000 1800 1600 1000 2500 1400 Impedance() 800 R 400 1000 Z R 800 600 400 200 1 10 100 1000 Frequency (MHz) 0 10000 Z R 1500 1000 500 200 X 2000 X X 1 10 PACKAGING STYLES REEL DIMENSIONS 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) 10000 TAPE DIMENSIONS Sprocket hole 1.5 +0.1 -0.0 Cavity 0.8max. 0.650.1 4.00.1 2.00.05 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. 160min. Taping 2.00.05 1.150.1 o60min. 8.00.3 1.0 3.50.05 Z 600 1200 1.750.1 Impedance() 10 MMZ1005F750E 1200 0 1 Impedance() 0 200min. o210.8 o1802.0 Dimensions in mm Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 001-05 / 20111129 / e9412_mmz