GBPC5002W thru GBPC5010W Glass Passivated Single Phase Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 50 Amp Features y y y y Circuit ~ Mechanical Data Case: Molded plastic case Terminals: Plated leads solderable per + - y Glass passivated die construction Integrally molded heatsink provides Very low thermal resistance for Maximum heat dissipation The plastic material used carries UL flammability recognition 94V-0 High surge current capability High temperature soldering guaranteed: 260 /10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension MIL-STD-750, Method 2026 Polarity: Marked on Body Mounting Position: Any ~ Module Type TYPE VRRM VRSM GBPC5002W GBPC5004W GBPC5006W GBPC5008W GBPC5010W 200V 400V 600V 800V 1000V 300V 500V 700V 900V 1100V Maximum Ratings and Thermal Characteristics (TA = 25 unless otherwise noted) Symbol IF(AV) IFSM i2t Visol RJC Tj, TSTG Weight Conditions Maximum average forward output rectified current Tc =70 Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t<8.3ms) a.c.50HZ;r.m.s.;1min Maximum thermal resistance(1) Operating Junction and storage temperature range Approximate Weight Values Units 50 A 450 A 840 A2s 2500 V /W g 0.7 -50 to 150 15 Electrical Characteristics (TA = 25 unless otherwise noted) Symbol VF IR Notes: Conditions Maximum Instantaneous Forward Voltage per leg Maximum DC reverse current at rated DC blocking voltage per leg IFM = 25A TA = 25 TA = 125 Values Units 1.1 V 5.0 500 A (1) Unit case mounted on Al plate heatsink (2) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with M5 screw Document Number: GBPC5002W thru GBPC5010W Mar.02,2016 www.smsemi.com 1 GBPC5002W thru GBPC5010W Performance Curves Mounted on a 220x220x50 mm AL plate heatsink 80 60 40 20 0 Resistive or Inductive load 0 500 50 100 150 TC, CASE TEMPERATURE (C) Fig.1 Forward Current Derating Curve Single Half-Sine Wave (JEDEC Method) 100 10 1.0 0.1 Tj=25C Pulse Width=300s 0.01 1000 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig.2 Typical Forward Characteristics (per element) 400 Cj, CAPACITANCE (pF) IFSM, PEAK FWD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) I F, AVERAGE FORWARD CURRENT (A) 100 300 200 100 100 Tj=150C 0 10 10 NUMBER OF CYCLES AT 60Hz Fig.3 Max Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (A) 1 Tj=25C f =1MHZ 100 0.1 1 10 100 VR, REVERSE VOLTAGE (V) Fig.4 Typical Junction Capacitance (per element) 10 Tj=125C 1.0 0.1 Tj=25C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig.5 Typical Reverse Characteristics (per element) Document Number: GBPC5002W thru GBPC5010W Mar.02,2016 www.smsemi.com 2 GBPC5002W thru GBPC5010W Package Outline Information 1.135(28.8) 1.115(28.3) CASE: GBPC-W 0.220(5.59) DIA. 0.200(5.08) 0.732(18.6) 0.692(17.6) 0.24(6.0) 0.18(4.6) ~ 0.732(18.6) 0.692(17.6) 1.135(28.8) 1.115(28.3) 0.24(6.0) 0.18(4.6) ~ 0.470(11.9) 0.50(12.7) 0.430(10.9) 0.44(11.7) 0.042(1.07) 0.038(0.97) DIA. 1.25 (31.8) MIN. 0.310(7.87) 0.290(7.36) Dimensions in inches (mm) Document Number: GBPC5002W thru GBPC5010W Mar.02,2016 www.smsemi.com 3