SOLID TANTALUM ELECTROLYTIC CAPACITORS F72 F75 Low Profile Conformal coated Chip Maximum CV Conformal coated Chip Compliant to the RoHS directive (2002/95/EC). Specifications Item Per formance Characteristics Category --55 to + 125C (Rated temperature : + 85C) Temperature Range Capacitance Tolerance 20%, 10% (at 120Hz) Dissipation Factor (120Hz) Refer to next page ESR (100kHz) Refer to next page * After 1 minute's application of rated voltage, leakage current at 20C is not more than 0.01CV or 0.5A, whichever is greater. Leakage Current * After 1 minute's application of rated voltage, leakage current at 85C is not more than 0.1CV or 5A, whichever is greater. * After 1 minute's application of derated voltage, leakage current at 125C is not more than 0.125CV or 6.3A, whichever is greater. Type numbering system (Example : 10V 100F) 2 3 4 5 Damp Heat (Steady State) At 40C, 90 to 95% R.H., For 500 hours (No voltage applied) Capacitance Change * * * * * * Refer to * 1 Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * * Initial specified value or less Temperature Cycles At --55C / +125C, 30 minutes each, For 5 cycles, Capacitance Change * * * * * * Refer to * 1 Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Currentv * * * * * * * * * * Initial specified value or less Resistance to Soldering Heat 10 seconds reflow at 260C, 10 seconds immersion at 260C Capacitance Change * * * * * * Refer to * 1 Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * * * Initial specified value or less Surge After application of surge in series with a 33 resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85C, capacitors meet the characteristics requirements listed below. Capacitance Change * * * * * * Refer to * 1 Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * * * Initial specified value or less Endurance After 2000 hours' application of rated voltage at 85C, capacitors meet the characteristic requirements listed below. Capacitance Change * * * * * * Refer to * 1 Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * * * Initial specified value or less Shear Test After applying the pressure load of 5N for 101 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. e-book F72 1 +15% Max. (at +125C) +10% Max. (at +85C) --10% Max. (at --55C) 6 7 8 9 10 11 12 13 14 F 7 2 1 A 1 0 7 M R AQ 2 Single face electrode Taping code(Refer to page 323 for details) Case code Capacitance tolerance Rated capacitance Rated voltage Series Drawing H A B D L W Solder electrode Dimensions (mm) Case code L W H A B (D) R 7.2 0.3 6.0 0.3 1.2 0.3 1.3 0.4 3.8 0.6 (6.2) M 7.2 0.3 6.0 0.3 (6.2) 2.0MAX. 1.3 0.4 3.8 0.6 D dimension only for reference F75 Type numbering system (Example : 16V 150F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 AQ 2 F 7 5 1 C 1 5 7 M D Single face electrode Taping code(Refer to page 323 for details) Case code Capacitance tolerance Rated capacitance Rated voltage Series Drawing Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of the capacitor, the pressure strength is applied with 20 R230 Terminal Strength a specified jig at the center of the substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable 45 45 abnormality on the capacitor terminals. As for the surge voltage, refer to page 322 for details. Dimensions Case code H 5N (0.51kg * f) For 10 1 seconds 1mm Applications Wireless modem Tablet PC Capacitance Change by Temperature L (mm) W H A B (D) A B D U 7.1 0.3 3.2 0.3 2.0MAX. 1.3 0.3 3.6 0.6 (6.0) L C 7.1 0.3 3.2 0.3 2.5 0.3 1.3 0.3 3.6 0.6 (6.0) D 7.3 0.3 4.3 0.3 2.8 0.3 1.3 0.4 3.9 0.6 (6.4) R 7.2 0.3 6.0 0.3 3.5 0.3 1.3 0.4 3.8 0.6 (6.2) W D dimension only for reference Standard Ratings F72 V Cap.(F) Code 033 336 047 476 068 686 100 107 150 220 4 0G 6.3 0J 10 1A 16 1C F75 R R R R R R R R R 157 R R R 227 R R R 330 337 R R (R) 470 477 680 687 1000 108 M 1500 158 M M M M ( ) The series in parentheses are being developed. Please contact to your local Nichicon sales office when these series are being designed in your application. V Cap. (F) 068 100 150 220 330 470 680 1000 1500 2200 Code 686 107 157 227 337 477 687 108 158 228 4 0G 6.3 0J C C C*D D D*R R R C*D U*D D*R (U) * R 10 1A C C*D D (U) * R 16 1C C C D R CAT.8100A SOLID TANTALUM ELECTROLYTIC CAPACITORS F72 Standard Ratings Rated Volt 4V 6.3V 10V 16V Rated Capacitance (F) Case code Part Number *1 Disspation ESR Leakage Current C/C Factor (@100kHz) (%) (A) (%@120Hz) 100 R F720G107MRC 4.0 8 0.70 150 R F720G157MRC 6.0 10 0.70 220 R F720G227MRC 8.8 12 0.70 330 R F720G337MRC 13.2 12 0.70 68 R F720J686MRC 4.3 6 0.75 100 R F720J107MRC 6.3 8 0.70 150 R F720J157MRC 9.5 10 0.70 220 R F720J227MRC 13.9 12 0.70 330 R F720J337MRC 20.8 12 0.70 1000 M F720J108MMC 63.0 30 0.14 15 1500 M F720J158MMC 95.0 45 0.14 20 47 R F721A476MRC 4.7 6 0.80 68 R F721A686MRC 6.8 6 0.75 100 R F721A107MRC 10.0 8 0.70 150 R F721A157MRC 15.0 10 0.70 220 R F721A227MRC 22.0 12 0.70 470 M F721A477MMC 47.0 30 0.14 15 680 M F721A687MMC 68.0 35 0.14 20 1000 M F721A108MMC 45 0.14 20 33 R F721C336MRC 5.3 6 0.90 47 R F721C476MRC 7.5 6 0.80 68 R F721C686MRC 10.9 6 0.75 200 *1 : C/C Marked "" Damp Heat Tempereature cycles Resistance soldering heat Surge Endurance F72 Case (%) 10 5 5 5 10 F75 Standard Ratings Rated Volt 4V 6.3V 10V 16V Rated Capacitance (F) Case code Part Number 330 C F750G337MCC 13.2 10 0.15 470 C F750G477MCC 18.8 14 0.12 470 D F750G477MDC 18.8 14 0.12 680 D F750G687MDC 27.2 18 0.12 1000 D F750G108MDC 40.0 24 0.12 1000 R F750G108MRC 40.0 24 0.12 1500 R F750G158MRC 60.0 30 0.12 2200 R F750G228MRC 88.0 45 0.07 220 C F750J227MCC 13.9 10 0.20 330 C F750J337MCC 20.8 10 0.15 330 D F750J337MDC 20.8 10 0.15 470 U F750J477MUC 29.6 15 0.10 470 D F750J477MDC 29.6 14 0.12 680 D F750J687MDC 42.8 18 0.12 680 R F750J687MRC 42.8 18 0.12 1000 R F750J108MRC 63.0 24 0.12 150 C F751A157MCC 15.0 10 0.22 220 C F751A227MCC 22.0 10 0.20 220 D F751A227MDC 22.0 10 0.20 330 D F751A337MDC 33.0 10 0.15 470 R F751A477MRC 47.0 14 0.12 68 C F751C686MCC 10.9 10 0.22 100 C F751C107MCC 16.0 10 0.22 150 D F751C157MDC 24.0 10 0.22 220 R F751C227MRC 35.2 10 0.20 Disspation *1 ESR Leakage Current C/C Factor (A) (%@120Hz) (@100kHz) (%) *1 : C/C Marked "" Damp Heat Tempereature cycles Resistance soldering heat Surge Endurance F75 Case (%) 10 5 5 5 10 CAT.8100A