Power Metal Film Resistor Legend mark or color code depending on size MF-S Series * Flameproof protection * Small size for power rating Flameproof protection * Range of 4 sizes: 0.5 watt to 3 watt at 70C Solder coated copper wire Electrical Data IRC Type Power Rating @ 70C (watts) MF1/2S 0.5 Resistance Range (ohms) Limiting Element Voltage (volts) Isolation Voltage (volts) 1.0 500 2.0 0.1 - 470K MF3S Standard Values Thermal Impedance (C/watt) Operating Temperature Range (C) 150 350 MF2S Resistance Tolerance (%) 140 0.1 - 1M MF1S TCR (ppm/C) 3.0 >1: 1, 2, 5 <1: 350 10: 150 1: 5, 10 E24 Preferred 700 110 -55 to 235 80 60 Environmental Data Characteristic Maximum Loaded at Rated Power: 1000 hrs at 70C 5 Shelf Life: 12 months at room temperature 1 Derating from Rated Power at 70C Climatic Climatic Category zero at 155C 1 40/125/56 Temperature Rapid Change 0..5 Resistance to Solder heat 0.5 General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com A subsidiary of TT electronics plc MF-S Series Issue October 2008 Sheet 1 of 3 Power Metal Film Resistor Physical Data d D f L Dimensions (Inches and (mm)) & Weight (g) IRC Type L max D max f min d nom PCB Mounting Centers Min Bend Radius Wt. nom MF1/2S 0.244 (6.2) 0.090 (2.3) 0.039 (21.0) 0.024 (0.6) 0.402 (10.2) 0.024 (0.6) 0.3 MF1S 0.354 (9.0) 0.134 (3.4) 0.772 (19.6) 0.031 (0.8) 0.500 (12.7) 0.047 (1.2) 0.5 MF2S 0.492 (12.5) 0.165 (4.2) 0.700 (17.8) 0.031 (0.8) 0.724 (18.4) 0.047 (1.2) 0.9 MF3S 0.571 (14.5) 0.201 (5.1) 0.937 (23.8) 0.031 (0.8) 0.799 (20.3) 0.047 (1.2) 1.1 Construction The resistance element is a precisely controlled thin film of metal alloy on a high purity ceramic core, protected by a cement coating applied so that terminations remain completely clear. This permits a well defined body length, (clean lead to clean lead dimension L). Terminations Material Solder-coated copper wire. Strength The terminations meet the requirements of IEC 68.2.21 Solderability The terminations meet the requirements of IEC 115-1, Clause 4.17.3.2 Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com Marking MF Series resistors are color coded with 4 bands. IEC 62 colors are used. Solvent Resistance The body protection and marking are resistant to all normal industrial cleaning solvents suitable for printed circuits. Flammability The resistors will not burn or emit incandescant particles under any condition of applied temperature or power overload. MF-S Series Issue October 2008 Sheet 2 of 3 Power Metal Film Resistor Ordering Data Application Notes 1. If the resistors are to dissipate full rate power, it is recommended that the terminations should not be soldered closer than 4mm from the body. Sample Part No. MF2S 6802 J R IRC Type MF1/2S, MF1S, MF2S, MF3S Value 2. Due to operating temperature limitations imposed by some pcb materials, derating may be necessary. An estimate of the temperature rise to be expected can be calculated using the thermal impedance figures given under Electrical Data. (Use IEC 62 code) Tolerance (Use IEC 62 code) J = 5%, K = 10% Packaging Details 3. Lead formed resistors can also be supplied. Standard options of Lancet, Radial, and Goalpost forming are shown in lead Form Information section. R = Reel, A = Ammo Type Code MF1/2S MF1S MF2S MF3S MF1/2S R 5000 2500 2500 1000 MF1S A 5000 2500 2500 N/A MF2S A 2000 1000 1000 N/A Packaging The preferred method of packaging is taped and ammo packed. See figure 1 for critical dimensions. Alternative packaging is available by special request. 6 6 b f2 f1 c Body location: f1 - f2 1.4mm Type b c MF1/2S 52 5 MF1S 52 5 MF2S 52 5 MF3S 67 10 Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com MF-S Series Issue October 2008 Sheet 2 of 3