AMPMODU
Interconnection System
Catalog 1307819 Revised 8-11
AMPMODU Interconnection System
FOR MORE INFORMATION
te.com/products/AMPMODUSystem50
te.com/products/AMPMODUMTE
TE Technical Support Center
Internet: te.com/help
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
te.com
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
1307819 CIS WR 08/2011
AMP, ACTION PIN, AMP-LATCH, AMP-O-LECTRIC, AMP-O-MATIC, AMPLIMITE, AMPMODU, AMPOMATOR,
CERTI-CRIMP, CHAMPOMATOR, PRO-CRIMPER, R-CAM, TE Connectivity and the TE connectivity (logo)
are trademarks. Teflon is a trademark of E.I. du Pont de Nemours and Company.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current.
TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all
implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice.
Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
2
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Table of Contents
AMPMODU Interconnection System
PC/104 and PC/104-
Plus Connectors
.050 x .050
[1.27 x 1.27]
Centerline
.050 x .100
[1.27 x 2.54]
Centerline
AMPMODU
2mm Connectors
.100 x .100
[2.54 x 2.54]
Centerline
.125 x .125
[3.18 x 3.18]
Centerline
1
2
3
4
5
6
.156 [3.96]
Centerline
7
Shunts
8
PC/104 and PC/104-Plus Connectors
Introduction …………………………………………………………………………………5
PC/104, Press Fit …………………………………………………………………………6, 7
PC/104-Plus, Press Fit ……………………………………………………………………8, 9
PC/104, Solder ……………………………………………………………………………10
PC/104-Plus, Solder ………………………………………………………………………11
Accessories, Kits …………………………………………………………………………12
0.050 [1.27] x 0.050 [1.27] CENTERLINE
AMPMODU 50/50 Grid
Board-to-Board Vertical Receptacles and Headers:
Introduction ……………………………………………………………………………13, 14
Vertical Receptacles, Double Row ………………………………………………………15
Vertical Headers, Double Row ……………………………………………………………16
Recommended PC Board Layouts ………………………………………………………17
Board-to-Board Right-Angle Headers:
Introduction …………………………………………………………………………………18
Right-Angle Headers, Double Row, Latching and Non-Latching ……………………19
Cable-to-Board Connectors:
Introduction …………………………………………………………………………………20
Receptacle Connectors, Double Row, With and Without Latch ………………………21
Cable Connector Terminating Cover, Double Row ……………………………………22
IDC (Insulation Displacement Crimp) Tooling …………………………………………23
Performance Specifications…………………………………………………………………24
Technical Documents ………………………………………………………………………24
.050 [1.27] x 0.100 [2.54] CENTERLINE
AMPMODU System 50……………………………………………………………………………25
Board-to-Board Connectors, Thru-Hole:
Introduction …………………………………………………………………………………26
Headers, Shrouded and Unshrouded ………………………………………………27-35
Introduction …………………………………………………………………………………36
Receptacles ……………………………………………………………………………37-40
PC Board Hole Layouts ………………………………………………………………41, 42
Board-to-Board Connectors, Surface-Mount:
Introduction …………………………………………………………………………………43
Headers ……………………………………………………………………………………44
Receptacles ………………………………………………………………………………45
Cable-to-Board Connectors, FFC Cable:
Introduction …………………………………………………………………………………46
Flexible Flat Conductor Cable ……………………………………………………………47
FFC Contacts ………………………………………………………………………………48
Receptacle Housings …………………………………………………………………49-52
ZIF-Line Connectors …………………………………………………………………53, 54
Cable-to-Board Connectors, Ribbon Cable:
Introduction …………………………………………………………………………………55
Ribbon Cable Receptacles ………………………………………………………………56
Paddleboard Receptacles ………………………………………………………………57
Flat Ribbon Cable ……………………………………………………………………58, 59
Application Tooling for Flex Film Contacts ………………………………………………60
Application Tooling ………………………………………………………………………60-62
Performance Specifications…………………………………………………………………63
Technical Documents ………………………………………………………………………64
1
2
3
AMPMODU 2mm Connectors
AMPMODU 2mm Connectors (Board to Board) ……………………………………………65
Headers, Unshrouded, Double Row, Thru-Hole Mount ………………………………66, 67
Breakaway Headers, Unshrouded, Double Row, Thru-Hole Mount …………………68-70
Breakaway Headers, Unshrouded, Double Row, Surface Mount ……………………71, 72
Stacking Header, Unshrouded, Double Row, Thru-Hole Mount …………………………73
Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount …………………74, 75
Headers, Shrouded, Double Row, Surface Mount ……………………………………76, 77
Headers, Shrouded, Double Row, Thru-Hole Mount with Cable Shrouds …………78, 79
Receptacles, Double Row, Thru-Hole, Vertical Mount…………………………………80, 81
Receptacles, Double Row, Surface Mount, Right-Angle Mount …………………………82
Receptacles, Double Row, Thru-Hole, Right-Angle Mount ………………………………83
Receptacles, Double Row, Surface Mount, Vertical Mount ………………………………84
.100 [2.54] x .100 [2.54] CENTERLINE
Introduction ………………………………………………………………………………85-87
Terms Explained………………………………………………………………………………87
Wire Sizes………………………………………………………………………………………88
Contact Platings ………………………………………………………………………………88
Mating Post Lengths …………………………………………………………………………88
Application Tooling …………………………………………………………………………88
Board-to-Board Solutions Guides, .100[2.54] Centerline Products …………………89
Wire-to-Board Solutions Guide, .100[2.54] Centerline Products………………………89
Mating Post Selection Guide ………………………………………………………………90
Parallel Stacking Guide for Board-to-Board Applications ……………………………91
Board-to-Board Products:
Unshrouded Headers ………………………………………………………………92-100
Breakaway and Retention Headers-Unshrouded ………………………………101-105
Reeled Breakaway Headers ………………………………………………………106, 107
Surface Mount Breakaway Headers ………………………………………………108-110
Unshrouded Stacking Headers- Breakaway ……………………………………111-113
Shrouded Headers …………………………………………………………………114-140
Standard Profile ……………………………………………………………………114-133
Low Profile …………………………………………………………………………134-140
Shrouded Stacking Headers ………………………………………………………141-144
ACTION PIN Headers ………………………………………………………………145-149
ACTION PIN Press-Fit Posts ………………………………………………………150, 151
Application Tooling for ACTION PIN Posts ……………………………………152, 153
ACTION PIN Stacking Connectors ………………………………………………154-161
Application Tooling for AMP ACTION PIN Stacking Connectors …………………162
0.025 [0.64] Square Posts ………………………………………………………………163
0.025 [0.64] Square Continuous Posts……………………………………………164, 165
0.045 [1.14] Square Continuous Posts……………………………………………166, 167
Horizontal Mount Receptacle Assemblies, Mod II ………………………………168-173
Vertical Mount Receptacle Assemblies, Mod II & Mod IV ………………………174-184
Surface Mount Vertical Receptacles, Mod IV ……………………………………185-192
Two-Piece Printed Circuit Board Connectors ……………………………………193-202
Accessories …………………………………………………………………………203-205
Wire-to-Board Products:
Locking Clip Contacts and Housings ……………………………………………206-209
Mod IV Contacts and Housings ……………………………………………………210-220
Short Point Contacts and Housings ………………………………………………221-224
MTE Interconnection System ………………………………………………………225-250
Surface Mount MTE Headers (Right-Angle & Vertical) ………………………251, 252
Interchangeable Contacts, Wire Crimp (Snap-In) ……………………………253, 254
MT and Shielded MT Connectors …………………………………………………255-265
Mini-Tandem Spring Receptacle Contacts ………………………………………266-269
Application Tooling ……………………………………………………………………270-275
Technical Documents …………………………………………………………………276-278
3
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Table of Contents (Continued)
AMPMODU Interconnection System
1
2
3
4
5
6
7
8
.050 x .050
[1.27 x 1.27]
Centerline
.050 x .100
[1.27 x 2.54]
Centerline
AMPMODU
2mm Connectors
.100 x .100
[2.54 x 2.54]
Centerline
.125 x .125
[3.18 x 3.18]
Centerline
.156 [3.96]
Centerline Shunts
PC/104 and PC/104-
Plus Connectors
4
5
4
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Table of Contents (Continued)
AMPMODU Interconnection System
PC/104 and PC/104-
Plus Connectors
.050 x .050
[1.27 x 1.27]
Centerline
.050 x .100
[1.27 x 2.54]
Centerline
AMPMODU
2mm Connectors
.100 x .100
[2.54 x 2.54]
Centerline
.125 x .125
[3.18 x 3.18]
Centerline
1
2
3
4
5
6
.156 [3.96]
Centerline
7
Shunts
8
.125 [3.18] x .125 [3.18] CENTERLINE
Wire-to-Board Product:
Level V IDC Connectors ……………………………………………………………279-282
.156 [3.96] CENTERLINE
Mod I 0.031 x 0.062 Interconnection System
Introduction …………………………………………………………………………283, 284
Receptacles, Vertical and Horizontal Board Mount ……………………………285, 286
Receptacle Assemblies, Vertical and Horizontal Board Mount …………………287-289
Receptacles, Crimp Snap-In (Wire Applied) …………………………………………290
Receptacle Housings, Standard Profile-Unkeyed (With/Without Strain Relief) …291, 292
Receptacle Housings, Low Profile-Keyed ……………………………………………293
Posts, Machined Applied ………………………………………………………………294
Headers:
Straight Post, Keyed ……………………………………………………………295, 296
Right-Angle, Keyed ……………………………………………………………………297
Locking Clip Contacts, Crimp Snap-In (Wire Applied) ………………………………298
Locking Clip Connector Housings, Single Row, Crimp Snap-In ……………………299
Application Tooling ………………………………………………………………300-304
Performance Specifications …………………………………………………………305
Technical Documents …………………………………………………………………305
Shunts
Dual In-Line Package DIP Shunts …………………………………………………306, 307
Post Shunts …………………………………………………………………………308-310
Performance Specifications …………………………………………………………311
Technical Documents …………………………………………………………………311
Part Number Index …………………………………………………………………………313-316
6
7
8
Restriction on the use of Hazardous Substances
(RoHS)
At TE Connectivity (TE) , we’re ready to support your RoHS
requirements. We’ve assessed more than 1.5 million end items/
components for RoHS compliance, and issued new part num-
bers where any change was required to eliminate the restricted
materials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
■Cross-Reference from
Non-compliant to Compliant Products
■Ability to browse RoHS
Compliant Products in our
on-line catalog
■Downloadable Technical Data
Customer Information
Presentation
■More detailed information
regarding the definitions
used above
■So whatever your questions when it comes to RoHS,
we have the answers at www.te.com/leadfree
RoHS
Customer
Support
Center
5
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
PC/104 and PC/104-Plus
Connectors
1
PC/104 and PC/104-Plus Connectors
The PC/104 and PC/104-Plus
connectors are industry
standard product offerings
which comply with the
interconnection require-
ments defined by the
PC/104 organization
(http://www.pc104.org)
Both products are designed
specifically for “flat-rock”
press-fit installation for ease
of application. Solder ver-
sion is also available.
Optional integral standoffs
minimize the customer’s
system assembly time.
The TE offering of the
standard PC/104 product is
a unitized connector rather
than the two piece, 40 and
64 position connectors
currently on the market.
Customer needs to stock
and apply only one part
number rather than two.
Performance Specifications
Electrical Characteristics
Meets requirements of PC/104 and
PC/104-Plus standards
Nominal Resistance —
10 milliohms maximum, DR
Insulation Resistance —
1000 megohms minimum
Dielectric Withstanding Voltage —
500 VAC for 1 min. at sea level
Mechanical Characteristics
Meets requirements of PC/104 and
PC/104-Plus standards
Current — Signal application only
Temperature — –55° to 105°C
Material and Finish
Housing — Black Thermoplastic, UL
94V-0
Contact — Phosphor Bronze, Full Gold
all over Nickel (stackthrough), Gold on
mating end, Tin or Tin-lead on PCB tail
all over Nickel (non-stackthrough)
Need more information?
Call Technical
Support 1-800-522-6752:
Technical Support is staffed
with specialists well versed
in all TE products. The
Center can provide you
with:
■Technical Support
■Catalogs
■Technical Documents
■TE Authorized Distributor
Locations
Technical Documents
Product Specifications
108-1956
Application Specifications
114-13021
Connector Centerline Position
PC/104 .100 104*
2.54
PC/104-Plus .079 120**
2.0
*Two circuits plugged per PC/104 specification.
Other options available.
**One circuit plugged per PC/104-Plus specifica-
tion. Other options available.
Product Facts
■Press fit design —
eliminates hand soldering
■Unitized PC/104 connector
assembly — eliminates two
piece (64 pin & 40 pin)
configuration
■Integral board spacers with
captive hardware — eases
& improves assembly
efficiency while minimizing
stocked hardware
■“Flat-rock” insertable — no
need for complex insertion
tooling
■Recognized by Underwriters'
Laboratories to US
and Canadian
standards
file No. E28476
■Fully compliant with PC104
& PC104-Plus standards
■Solutions available for lead
free processes (ie. ENIG
and silver immersion plated
PCB's)
6
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
PC/104 and PC/104-Plus
Connectors
1
PC/104, Press-Fit
Stackthrough, No Standoffs
Gold plated contacts*
Part No. 1375795-1 (keyed), Part No. 1375795-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375795-3 (keyed), Part No. 1375795-4 (unkeyed)
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Sq.
Typ.
.025
[0.64]
Typ.
.100
[2.54]
.483±.013
[12.27±0.34]
Typ.
.435
[11.05]
Typ.
.100
[2.54]
.300
[7.62]
3.10
[78.74]
Recommended PC Board Layout
See Customer Drawing for
Hole Geometry and Recommended Plating.
Keyed
.300
[7.62]
3.10
[78.74]
Unkeyed
Non-Stackthrough, No Standoffs
Tin-lead plated tails*
Part No. 1375796-1 (keyed), Part No. 1375796-2 (unkeyed)
Matte tin plated tails**
Part No. 1375796-3 (keyed), Part No. 1375796-4 (unkeyed)
Typ.
.100
[2.54]
.119±.013
[3.03±0.34]
Typ.
.435
[11.05]
Typ.
.100
[2.54]
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000005 [0.000130]
min. Gold on remainder, all over .000050
[0.00127] Nickel
or
Phosphor Bronze; plated .000015 [0.00038]
min. Gold on mating receptacle end,
.000100-.000200 [0.000254-.00508] matte
tin on compliant section, .000005
{0.000130] min. Gold on remainder of post,
all over .000050 [0.00127] Nickel
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin or tin-lead on remainder, all over
.000050 [0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
7
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
PC/104 and PC/104-Plus
Connectors
1
PC/104, Press-Fit (Continued)
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
Plugged
Circuit
Plugged
Circuit
Breakaway Standoffs
2.01
[51.11]
Sq.
Typ.
.025
[0.64]
Typ.
.100
[2.54]
.483±.013
[12.27±0.34]
Typ.
.435
[11.05]
Typ.
.100
[2.54]
Typ.
.600
[15.24]
Typ.
.100
[2.54]
.119±.013
[3.03±0.34]
Typ.
.435
[11.05]
Typ.
.100
[2.54]
Typ.
.600
[15.24]
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
Plugged
Circuit
Plugged
Circuit
Breakaway Standoffs
2.01
[51.11]
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Sq.
Typ.
.025
[0.64]
Typ.
.100
[2.54]
.483±0.13
[12.27±0.34]
Typ.
.435
[11.05]
.100
[2.54]
Typ.
Typ.
.600
[15.24]
.300
[7.62]
.125
[3.18]
3.10
[78.74]
0.05
[1.27]
Dia.
2 Plcs.
Unkeyed
Recommended PC Board Layout
See Customer Drawing for
Hole Geometry and Recommended Plating.
.300
[7.62]
.125
[3.18]
3.10
[78.74]
0.05
[1.27]
Dia.
2 Plcs.
Keyed
Typ.
.100
[2.54]
.119±.013
[3.03±0.34]
Typ.
.435
[11.05]
.100
[2.54]
Typ.
Typ.
.600
[15.24]
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Stackthrough, 2 Standoffs
Gold plated contacts*
Part No. 1375793-1 (keyed), Part No. 1375793-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375793-3 (keyed), Part No. 1375793-4 (unkeyed)
Non-Stackthrough, 2 Standoffs
Tin-lead plated tails*
Part No. 1375794-1 (keyed), Part No. 1375794-2 (unkeyed)
Matte tin plated tails**
Part No. 1375794-3 (keyed), Part No. 1375794-4 (unkeyed)
Stackthrough, 4 Standoffs
Gold plated contacts*
Part No. 1375791-1 (keyed), Part No. 1375791-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375791-3 (keyed), Part No. 1375791-4 (unkeyed)
Non-Stackthrough, 4 Standoffs
Tin-lead plated tails*
Part No. 1375792-1 (keyed), Part No. 1375792-2 (unkeyed)
Matte tin plated tails**
Part No. 1375792-3 (keyed), Part No. 1375792-4 (unkeyed)
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
8
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
PC/104 and PC/104-Plus
Connectors
1
PC/104-Plus, Press-Fit
2.37
[60.30]
.315
[8.00]
Plugged
Circuit
(-3 or -6 only)
Plugged
Circuit
(-2 or -5 only) .015
[0.39]
Sq.
Typ.
.020
[0.51]
Typ.
.079
[2.00]
.368
[9.35]
.483±.013
[12.27±0.34]
Typ.
Typ.
.079
[2.00]
.236
[6.00]
2.28
[58.0]
Recommended PC Board Layout
for 1375799-1, 1375799-4,
1375800-1, 1375800-4
.236
[6.00]
2.28
[58.0]
Recommended PC Board Layout
for 1375799-2, 1375799-5,
1375800-2, 1375800-5
.236
[6.00]
2.28
[58.0]
Recommended PC Board Layout
for 1375799-3, 1375799-6,
1375800-3, 1375800-6
Typ.
.079
[2.00]
.368
[9.35]
.112±.013
[2.85±0.34]
Typ.
Typ.
.079
[2.00]
2.37
[60.30]
.315
[8.00]
Plugged
Circuit
(-3 or -6 only)
Plugged
Circuit
(-2 or -5 only) .015
[0.39]
See Customer Drawing for Hole Geometry and Recommended Plating.
(Including ENIG plated PCB's)
Stackthrough, No Standoffs
Gold plated contacts*
Part No. 1375799-1 (unkeyed)
Part No. 1375799-2 (keyed-A1) per PC/104-Plus specification
Part No. 1375799-3 (keyed-D30) per PC/104-Plus specification
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375799-4 (unkeyed)
Part No. 1375799-5 (keyed-A1) per PC/104-Plus specification
Part No. 1375799-6 (keyed-D30) per PC/104-Plus specification
Non-Stackthrough, No Standoffs
Tin-lead plated tails*
Part No. 1375800-1 (unkeyed)
Part No. 1375800-2 (keyed-A1) per PC/104-Plus specification
Part No. 1375800-3 (keyed-D30) per PC/104-Plus specification
Matte tin plated tails**
Part No. 1375800-4 (unkeyed)
Part No. 1375800-5 (keyed-A1) per PC/104-Plus specification
Part No. 1375800-6 (keyed-D30) per PC/104-Plus specification
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000005 [0.000130]
min. Gold on remainder, all over .000050
[0.00127] Nickel
or
Phosphor Bronze; plated .000015 [0.00038]
min. Gold on mating receptacle end,
.000100-.000200 [0.000254-.00508] matte
tin on compliant section, .000005
{0.000130] min. Gold on remainder of post,
all over .000050 [0.00127] Nickel
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin or tin-lead on remainder, all over
.000050 [0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
9
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
PC/104 and PC/104-Plus
Connectors
1
PC/104-Plus, Press-Fit (Continued)
Typ.
0.79
[2.00]
.112±.013
[2.85±0.34]
.600
[15.24]
Typ.
Typ.
.368
[9.35]
Typ. 0.79
[2.00]
.315
[8.00]
.015
[0.39]
2.37
[60.30]
Plugged
Circuit
(-3 and -6 only)
Plugged
Circuit
(-2 and -5 only)
Recommended PC Board Layout
for 1375797-1, 1375797-4,
1375798-1, 1375798-4
Recommended PC Board Layout
for 1375797-2, 1375797-5,
1375798-2, 1375798-5
Recommended PC Board Layout
for 1375797-3, 1375797-6,
1375798-3, 1375798-6
.315
[8.00]
.015
[0.39]
2.37
[60.30]
Plugged
Circuit
(-3 and -6 only)
Plugged
Circuit
(-2 and -5 only)
Sq.
Typ.
.020
[0.51]
Typ.
0.79
[2.00]
.483±.013
[12.27±0.34]
.600
[15.24]
Typ.
Typ.
.368
[9.35] Typ.
.079
[2.00]
See Customer Drawing for
Hole Geometry and Recommended Plating.
Stackthrough, 2 Standoffs
Gold plated contacts*
Part No. 1375797-1 (unkeyed)
Part No. 1375797-2 (keyed-A1)
per PC/104-Plus specification
Part No. 1375797-3 (keyed-D30)
per PC/104-Plus specification
Gold plated contacts with Tin
plated compliant pin section**
Part No. 1375797-4 (unkeyed)
Part No. 1375797-5 (keyed-A1)
per PC/104-Plus specification
Part No. 1375797-6 (keyed-D30)
per PC/104-Plus specification
Non-Stackthrough, 2 Standoffs
Tin-lead plated tails*
Part No. 1375798-1 (unkeyed)
Part No. 1375798-2 (keyed-A1)
per PC/104-Plus specification
Part No. 1375798-3 (keyed-D30)
per PC/104-Plus specification
Matte tin plated tails**
Part No. 1375798-4 (unkeyed),
Part No. 1375798-5 (keyed-A1)
per PC/104-Plus specification
Part No. 1375798-6 (keyed-D30)
per PC/104-Plus specification
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
10
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
PC/104 and PC/104-Plus
Connectors
1
PC/104, Solder
Note: All part numbers are RoHS compliant.
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
.300
[7.62]
3.10
[78.74]
Unkeyed
.300
[7.62]
3.10
[78.74]
.041±.003
[1.03±0.08]
Dia.
102 Plcs.
Plated Through Hole
Keyed
Non-Stackthrough, No Standoffs
Part No. 1375963-3 (keyed)
Part No. 1375963-4 (unkeyed)
Typ.
.100
[2.54]
.119±.013
[3.03±0.34]
Typ.
.435
[11.05]
Typ.
.100
[2.54]
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Non-Stackthrough, 4 Standoffs
Part No. 1375959-3 (keyed)
Part No. 1375959-4 (unkeyed)
Typ.
.100
[2.54]
.119±.013
[3.03±0.34]
Typ.
.435
[11.05]
Typ.
.100
[2.54]
Typ.
.600
[15.24]
.390
[9.90]
.195
[4.95]
Typ.
3.21
[81.60]
Plugged
Circuit
Plugged
Circuit
Breakaway Standoffs
2.01
[51.11]
Non-Stackthrough, 2 Standoffs
Part No. 1375961-3 (keyed)
Part No. 1375961-4 (unkeyed)
Typ.
.100
[2.54]
.119±.013
[3.03±0.34]
Typ.
.435
[11.05]
.100
[2.54]
Typ.
Typ.
.600
[15.24]
.300
[7.62]
.125
[3.18]
3.10
[78.74]
0.05
[1.27]
Dia.
2 Plcs. .040±.003
[1.01±0.08]
Dia.
102 Plcs.
Plated Through Hole
Keyed
Recommended PC Board Layout
Recommended PC Board Layout
.300
[7.62]
.125
[3.18]
3.10
[78.74]
0.05
[1.27]
Dia.
2 Plcs.
Unkeyed
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin on remainder, all over .000050
[0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
11
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
PC/104 and PC/104-Plus
Connectors
1
PC/104-Plus, Solder
Note: All part numbers are RoHS
compliant.
Non-Stackthrough, 2 Standoffs
Part No. 1375965-4 (unkeyed)
Part No. 1375965-5 (keyed-A1)
per PC/104-Plus specification
Part No. 1375965-6 (keyed-D30)
per PC/104-Plus specification
.315
[8.00]
.015
[0.39]
2.37
[60.30]
Plugged
Circuit
(-6 only)
Plugged
Circuit
(-5 only)
Typ.
.079
[2.00]
.112±.013
[2.85±0.34]
.600
[15.24]
Typ.
Typ.
.368
[9.35]
Typ. 0.79
[2.00]
Recommended PC Board Layout for 1375965-5
Recommended PC Board Layout for 1375965-6
.236
[6.00]
2.28
[58.0]
.035±.003
[0.88±0.08]
Dia.
120 Plcs.
Plated Through Hole
Recommended PC Board Layout
for 1375967-4
.236
[6.00]
2.28
[58.0]
.035±.003
[0.88±0.08]
Dia.
119 Plcs.
Plated Through Hole
Recommended PC Board Layout
for 1375967-5
.236
[6.00]
2.28
[58.0]
.035±.003
[0.88±0.08]
Dia.
119 Plcs.
Plated Through Hole
Recommended PC Board Layout
for 1375967-6
Non-Stackthrough, No Standoffs
Part No. 1375967-4 (unkeyed)
Part No. 1375967-5 (keyed-A1)
per PC/104-Plus specification
Part No. 1375967-6 (keyed-D30)
per PC/104-Plus specification
Typ.
.079
[2.00]
.368
[9.35]
.112±.013
[2.85±0.34]
Typ.
Typ.
.079
[2.00]
2.37
[60.30]
.315
[8.00]
Plugged
Circuit
(-6 only)
Plugged
Circuit
(-5 only) .015
[0.39]
.035±.003
[0.88±0.08]
Dia.
119 Plcs.
Plated Through Hole
.035±.003
[0.88±0.08]
Dia.
119 Plcs.
Plated Through Hole
Recommended PC Board Layout for 1375965-4
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin on remainder, all over .000050
[0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
12
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
PC/104 and PC/104-Plus
Connectors
1
Accessories
Note: All part numbers are RoHS compliant.
Shroud, PC/104-Plus
Part No. 1375801-1
Material — PBT, Black
Organizer, PC/104
Part Number 1445251-1
Material —Polyester, PBT, Black
2.45
[62.34]
2.53 ± 0.10
[64.36 ± 0.25]
.450 ± .010
[11.43 ± 0.25]
.370
[9.41] Typ.
.079
[2.00]
Typ.
.039
[1.00]
.440 ± .003
[11.18 ± 0.08]
Typ.
.255
[6.47]
2.39
[60.76]
.333
[8.46]
Kit Packaging
Part Numbers
Keyed
Circuits
Keyed
Circuits
Keyed
Circuits
.10 [2.54] Typ.
.05 [1.27] Typ.
.10
[2.54] Typ.
.05
[1.27] Typ.
2.01
[51.11]
3.21
[81.60]
.195
[4.95] Typ.
.390
[9.90]
Part No. 1445441-3 Part No. 1445440-3 Part No. 1445439-3
Component Part Number
Part Number Connector Assembly Organizer Style
1445441-3 1375795-3 1445251-1 Keyed
1445441-4 1375795-4 1445251-1 Unkeyed
1445440-3 1375793-3 1445251-1 Keyed
1445440-4 1375793-4 1445251-1 Unkeyed
1445439-3 1375791-3 1445251-1 Keyed
1445439-4 1375791-4 1445251-1 Unkeyed
13
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
AMPMODU 50/50 Grid Connector System
Board-to-Board Vertical
Receptacles and Headers
Produced under a Quality
Management System certi-
fied to ISO 9001
A copy of the
certificate is available
upon request.
Vertical Headers,
Board-to-Board
(Page 16)
Vertical Headers,
Board-to-Board
(Page 16)
Right-Angle Headers,
Board-to-Board (Page 19)
Vertical Headers,
Board-to-Board
(Page 16):
.250 [6.35] Stack Height
.320 [8.13] Stack Height
.390 [9.91] Stack Height
Vertical Receptacles,
Board-to-Board
(Page 15)
Vertical Receptacles,
Board-to-Board
(Page 15)
Receptacles,
Cable-to-Board,
With Latch
(Page 21)
Receptacles,
Cable-to-Board
Without Latch
(Page 21)
ISO
Certified
9001
14
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Board-to-Board Vertical Receptacles and Headers
Board-to-Board Vertical
Receptacles and Headers
Product Facts
■ Surface-mount products for
parallel board-to-board
applications, as well as
right-angle board-to-board
and cable-to-board
applications
■ High density .050 x .050
[1.27x1.27] centerline grid
■ Three board-to-board stack
heights: .250 [6.35], .320
[8.13] and .390 [9.91]
■ Non-protrusive metallic
holddowns
■ Reliable dual beam
receptacle contacts for
redundant contact
■ Duplex plated receptacle
and post contacts; gold
plated on mating areas,
tin plated on tails
■ Compatible with standard
surface-mount processing
(VPR and IR)
■ Receptacle and header allow
for drainage of processing
fluids
■ Tape and reel packaging
available. Contact TE
for details
■ Polarized header and recep-
tacle assemblies
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by
Canadian Standards
Association
File No. LR7189
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
for parallel board-to-board
stacking in high density
applications.
Right-angle board-to-board
and cable-to-board
applications are also
possible, since the vertical
receptacles also mate with
non-latching right-angle
headers (page 19) and the
vertical headers also mate
with non-latching cable
connectors.
Available are double row,
vertical shrouded headers
and receptacles in sizes
ranging from 10 through
100 positions (in 10 position
increments).
Parallel board-to-board
stack heights of .250 [6.35],
.320 [8.13] and .390 [9.91]
are achievable by selection
of the appropriate header.
The receptacle is the same
for all three stack height
headers.
Non-protrusive metallic
holddowns are designed for
use in .062 [1.57] or thicker
PC boards and allow
surface mounting to both
sides of the board. In
addition to providing
retention during processing,
the holddowns are soldered
during reflow and therefore
provide long-term strain relief
for the solder joints.
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
to be compatible with
standard surface-mount
processes; IR (infrared) and
VPR (vapor phase reflow).
The surface-mount
connectors have been
designed so that
dimensioning, tolerances,
referenced datums,
holddown characteristics
and packaging methods
result in a system that is
compatible with robotic
assembly.
The headers and
receptacles feature
polarization to prevent
misalignment.
Three Board Stack Heights
Non-Protrusive
Metallic Holddowns
.250±.006
[6.35±0.15 ]
.320±.006
[8.13±0.15]
.390±.006
[9.91±0.15]
R
R
15
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Note: All part numbers are RoHS compliant.
Vertical Receptacles,
Double Row
Material and Finish
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Headers — pages 16, 19
PC Board Layouts — page 17
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1332
Application Specification
114-7010
Packaging: Tube or Tape and Reel
No. of Dimension Receptacle
Pos. A Part Numbers
Tube Tape and Reel* No Hold Down w/Vacuum Cover
10 .266 [6.75] 5-104652-1 5-147384-1 5-147413-1
20 .516 [13.11] 5-104652-2 5-147384-2 5-147413-3
30 .766 [19.46] 5-104652-3 5-147384-3 5-147413-4
40 1.016 [25.81] 5-104652-4 5-147384-4 —
50 1.266 [32.16] 5-104652-5 5-147384-5 5-147413-2
60 1.516 [38.51] 5-104652-6 5-147384-6 —
70 1.766 [44.86] 5-104652-7 5-147384-7 —
80 2.016 [51.21] 5-104652-8 5-147384-8 —
100 2.516 [63.91] 6-104652-0 5-147384-9 —
* Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 17.
Polarizing Tab
(For Polarization to
Mating Header)
A.028
[0.71]
.187
[4.75]
.120
[3.05]
.050
[1.27]
.050
[1.27]
.050
[1.27]
16
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Note: All part numbers are RoHS compliant.
Vertical Headers,
Double Row
Material and Finish
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Receptacles — page 15, 21
(without latch only)
PC Board Layouts — page 17
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1332
Application Specification
114-7010
Packaging: Tube or Tape and Reel
No. of Dimension
Header Part Numbers
Pos. A .250 [6.35] Mated Height .320 [8.13] Mated Height .390 [9.91] Mated Height
Tubes Tape & Reel* Tubes Tape & Reel* Tubes Tape & Reel*
Hold Down No Hold Down Hold Down No Hold Down
10 .372 [9.44] 5-104655-1 5-147381-1 5-147121-1 5-104656-1 5-147382-1 5-104693-1 — 5-147383-1
20 .622 [15.79] 5-104655-3 5-147381-2 5-147121-2 5-104656-2 5-147382-2 5-104693-2 — 5-147383-2
30 .872 [22.14] 5-104655-4 5-147381-3 — 5-104656-3 5-147382-3 5-104693-3 — 5-147383-3
40 1.122 [28.49] 5-104655-5 5-147381-4 — 5-104656-4 5-147382-4 5-104693-4 — 5-147383-4
50 1.372 [34.84] 5-104655-6 5-147381-5 — 5-104656-5 5-147382-5 5-104693-5 — 5-147383-5
60 1.622 [41.19] 5-104655-7 5-147381-6 — 5-104656-6 5-147382-6 5-104693-6 — 5-147383-6
70 1.872 [47.54] 5-104655-8 5-147381-7 — 5-104656-7 5-147382-7 5-104693-7 — 5-147383-7
80 2.122 [53.89] 5-104655-9 5-147381-8 — 5-104656-8 5-147382-8 5-104693-8 — 5-147383-8
90 2.372 [60.24] ———5-104656-9 — 5-104693-9 ——
100 2.622 [66.59] 6-104655-1 5-147381-9 — 6-104656-0 5-147382-9 6-104693-0 5-147503-1 5-147383-9
*Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 17.
For .250 [6.35] Mated Height
For .320 [8.13] Mated Height
For .390 [9.91] Mated Height
.050
[1.27]
.050
[1.27]
.050
[1.27]
.030
[0.76]
.030
[0.76]
.050
[1.27]
.2255
[5.728]
.225
[5.71]
.2975
[7.557]
.3675
[9.335]
A
A
A
.030
[0.76]
.050
[1.27]
Board-to-Board Vertical Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
17
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Recommended PC Board Layouts for Vertical Connectors
Note: All part numbers are RoHS compliant.
Recommended PC
Board Layouts
No. of Receptacle Dimensions Header Dimensions
Pos. BC D BC D
10 4 .200 [5.08] .320 [8.12] 4 .200 [5.08] .322 [8.17]
20 9 .450 [11.43] .570 [14.48] 9 .450 [11.43] .572 [14.52]
30 14 .700 [17.78] .820 [20.83] 14 .700 [17.78] .822 [20.87]
40 19 .950 [24.13] 1.070 [27.19] 19 .950 [24.13] 1.072 [27.22]
50 24 1.200 [30.48] 1.320 [33.53] 24 1.200 [30.48] 1.322 [33.57]
60 29 1.450 [36.83] 1.570 [39.88] 29 1.450 [36.83] 1.572 [39.92]
70 34 1.700 [43.18] 1.820 [46.23] 34 1.700 [43.18] 1.822 [46.27]
80 39 1.950 [49.53] 2.070 [52.58] 39 1.950 [49.53] 2.072 [52.62]
90 44 2.200 [55.88] 2.320 [58.93] 44 2.200 [55.88] 2.322 [58.97]
100 49 2.450 [62.23] 2.570 [65.28] 49 2.450 [62.23] 2.572 [65.32]
D
D
.029
[0.74]
BSpaces at .050 [1.27] = C
BSpaces at .050 [1.27] = C
C of Pattern
Detail A
Detail A
C of Pattern
.061
[1.54]
.050
[1.27]
.162
[4.11]
.182
[4.62]
.091
[2.31]
.110
[2.79]
.050
[1.27]
.060
[1.52]
.065
[1.65]
.130
[3.30]
.029
[0.74]
L
L
Headers
Receptacles
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
.010
[0.25]
4 Plc.
Detail A
18
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Board-to-Board Right-Angle Headers
Board-to-Board
Right-Angle Headers
AMPMODU 50/50 Grid
Right-Angle Headers will
accommodate a variety of
high density packaging
applications; right-angle
board-to-board applications
when mated with vertical
receptacles (page 15) and
right-angle cable-to-board
applications when mated
with cable connectors
(page 21). The small
.050 x .050 [1.27 x 1.27]
centerline contact spacing
allows efficient use of the
PC board area.
Mechanical support of the
headers to the PC board is
provided by non-protrusive
metallic holddowns
designed for .062 [1.57] or
thicker PC boards. These
holddowns are of the same
design as those used in the
vertical headers (page 16)
and receptacles (page 15).
There are also metallic tabs
that are soldered to the sur-
faces of the PC board pads
for added support.
AMPMODU 50/50 Grid
Right-Angle Headers are
available in double-row, in
either latching or non-
latching versions, and in
sizes ranging from 10
through 100 positions (in 10
position increments). The
latching version provides
positive retention when
mated with the latching
cable connector (page 21).
All headers feature polariza-
tion to help prevent mis-
alignment during mating.
Product Facts
■ Surface-mount products for
right-angle board-to-board
and cable-to-board
applications
■ Double-row, right-angle
shrouded headers
■ High density .050 x .050
[1.27 x 1.27] centerline grid
■ Latching and non-latching
versions available
■ Non-protrusive metallic
holddowns
■ Metallic tabs, when
soldered to PC board pad,
provide added mechanical
support
■ Duplex plated post contacts;
gold plated on mating area,
tin plated on tails
■ Compatible with standard
surface-mount processing
(VPR and IR)
■ Standoffs on header
housings allow for drainage
of processing fluids
■ All headers are polarized
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by Canadian
Standards
Association
File No. LR7189
R
R
19
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Board-to-Board Right-Angle Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Note: All part numbers are RoHS compliant.
Right-Angle Headers, Double
Row, Latching and Non-Latching
Material and Finish
Housing — Liquid crystal polymer,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.000381] tin on
solder tail, with entire contact under-
plated .000050 [0.00127] nickel
Holddown — Copper alloy; plated
.0000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Receptacles — page 15, 21
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1443
Application Specification
114-7010
Packaging: Tube
Recommended PC Board Layout
No. of Dimensions Header
Pos. Part Numbers
AB C D Latching Non-Latching
10 .630 [16.00] 9 .225 [5.72] .550 [13.97] 5-104895-1 5-104894-1
20 .880 [22.35] 19 .475 [12.07] .800 [20.32] 5-104895-2 5-104894-2
30 1.130 [28.70] 29 .725 [18.42] 1.050 [26.67] 5-104895-3 5-104894-3
40 1.380 [35.05] 39 .975 [24.77] 1.300 [33.02] 5-104895-4 5-104894-4
50 1.630 [41.40] 49 1.225 [31.12] 1.550 [39.37] 5-104895-5 5-104894-5
60 1.880 [47.75] 59 1.475 [37.47] 1.800 [45.72] 5-104895-6 5-104894-6
70 2.130 [54.10] 69 1.725 [43.82] 2.050 [52.07] 5-104895-7 5-104894-7
80 2.380 [60.45] 79 1.975 [50.17] 2.300 [58.42] 5-104895-8 5-104894-8
100 2.880 [73.15] 99 2.475 [62.87] 2.800 [71.12] 6-104895-0 6-104894-0
A
.430
[10.92]
.340
[8.64] .305
[7.75]
B Spaces at
.025 = C
[0.64]
.085
[2.16]
.140
[3.56]
.175
[4.45]
D
.100
[2.54]
Min
.063
[1.57]
(2 Plc)
.190
[4.83]
(2 Plc)
.047 Dia
[1.19]
Plated-Thru Hole
(2 Plc)
.136
[3.45]
(2 Plc)
.050
[1.27]
.352
[8.94]
.213
[5.41]
.050
[1.27]
.050
[1.27]
Typ.
.029
[0.74]
Typ
.065
[1.65]
Typ.
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
Non-Latching Header
Latching Header
20
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
2
Cable-to-Board Connectors
Cable-to-Board
Connectors
Product Facts
■ Double-row receptacle
connectors provide cable-
to-board connection
capabilities for vertical
headers (non-latching) and
right-angle headers
(latching and non-latching)
■ IDC (Insulation
Displacement Crimp) mass
termination of solid or
stranded round conductor
.050 [1.27] centerline
ribbon cable with PVC or
polyethylene insulation
■ Accommodates ribbon cable
conductor sizes of 28 AWG
[0.08-0.09 mm2] and 30
AWG [0.05 mm2] and
insulation diameters up to
.036 [0.91] maximum
■ Reliable single beam
receptacle contact design
■ Duplex plated receptacle
contacts; gold plated in
mating area, tin in
termination area
■ Terminating covers (sold
separately) provide both
strain relief and protection
to the termination area
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Connectors available with or
without metal latch
■ Connectors without latches
are polarized to help
prevent mismating
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by Canadian
Standards
Association
File No. LR7189
These double-row cable
connectors, with a .050 x
.050 [1.27 x 1.27] centerline
contact spacing, provide
cable-to-board connection
capabilities for the
AMPMODU 50/50 Grid
Connector System. Cable
connectors without a latch
will mate with the vertical
headers (page 16), while
cable connectors with or
without a latch can be used
to mate with the right-angle
headers (page 19).
The cable connectors
feature reliable single-
beam IDC (insulation
displacement crimp)
contacts which are duplex
plated with .000030
[0.00076] gold. These
contacts can be mass
terminated to either solid or
stranded round conductor
ribbon cable with conductor
sizes of 28 AWG [0.08-0.09
mm2] and 30 AWG [0.05
mm2] and a maximum
insulation diameter of .036
[0.91]. During termination,
the terminating covers,
which must be purchased
separately, assist in guiding
the wire into the IDC
contacts, then provide
strain relief when fully
seated. Actual termination
is accomplished with the
TE manual tooling shown on
page 23.
The latching version of the
cable connector is
equipped with a metal latch
which provides positive
retention of the receptacle
cable connector when
mated with a surface-
mounted right-angle header.
The cable connector without
a metal latch features
polarization to help prevent
mismating. All connectors
are available in sizes
ranging from 10 through
100 positions (in 10 position
increments).
R
R
AMPMODU Interconnection System
21
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Note: All part numbers are RoHS compliant.
Receptacle Connectors, Double
Row, With and Without Latch
Material and Finish
Housing — Thermoplastic, black,
94V-0 rated
Latch — Stainless steel
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] minimum
gold in mating area, .000150 [0.00381]
minimum tin on solder tail, with entire
contact underplated .000050 [0.00127]
minimum nickel
Related Product Data
Mating Headers — page 16, 19
(latching)
Terminating Covers (Must be
Purchased Separately, 2 Required
per Connector) — page 22
Termination Tooling — page 23
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1443
Application Specification
408-9817, 408-9909
Packaging: Tube
A
No. of Dimensions Receptacle
Pos. Part Numbers
AB C D
With Latch Without Latch
10 .578 [14.68] 4 .200 [5.08] .266 [6.76] 5-104892-1 5-104893-1
20 .828 [21.03] 9 .450 [11.43] .516 [13.11] 5-104892-2 5-104893-2
30 1.078 [27.38] 14 .700 [17.78] .766 [19.46] 5-104892-3 5-104893-3
40 1.328 [33.73] 19 .950 [24.13] 1.016 [25.81] 5-104892-4 5-104893-4
50 1.578 [40.08] 24 1.200 [30.48] 1.266 [32.16] 5-104892-5 5-104893-5
60 1.828 [46.43] 29 1.450 [36.83] 1.516 [38.51] 5-104892-6 5-104893-6
70 2.078 [52.78] 34 1.700 [43.18] 1.766 [44.86] 5-104892-7 5-104893-7
80 2.328 [59.13] 39 1.950 [49.53] 2.016 [51.21] 5-104892-8 5-104893-8
100 2.828 [71.83] 49 2.450 [62.23] 2.516 [63.91] 6-104892-0 6-104893-0
.280
[7.11]
.627
[15.94] .690
[17.56]
D
.120
[3.05]
B Spaces at
.050 [1.27] = C
.284
[7.21]
.327
[8.31]
.050
[1.27]
.050
[1.27]
Typ
22
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
2
Terminating Covers for Cable Connectors
Note: All part numbers are RoHS compliant.
Cable Connector Terminating
Cover, Double Row
Material
Glass-filled thermoplastic,
black, 94V-0 rated
Related Product Data
Connectors used with Covers —
page 21
Termination Tooling — page 23
Technical Documents — page 24
Product Specification 108-1443
Application Specification
408-9817, 408-9909
Packaging: Plastic bag
No. of Dimension Terminator Cover
Pos. A Part Numbers
10 .565 [14.35] 104891-1
20 .815 [20.70] 104891-2
30 1.065 [27.05] 104891-3
40 1.315 [33.82] 104891-4
50 1.565 [39.75] 104891-5
60 1.815 [46.10] 104891-6
70 2.065 [52.45] 104891-7
80 2.315 [58.80] 104891-8
100 2.815 [71.50] 1-104891-0
Note: Terminating covers must be purchased separately, two are required for
each cable connector.
.277
[7.04]
.191
[4.85]
A
AMPMODU Interconnection System
23
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Application Tooling for Cable Connectors
Note: All part numbers are RoHS compliant.
IDC (Insulation Displacement
Crimp) Tooling
Manual Miniature Application Frame Assembly 91295-1
with Cover Closing Kit 543518-1
The Manual Miniature
Application Frame
Assembly 91295-1,
equipped with a Cover
Closing Kit 543518-1, is
used for the IDC termina-
tion of ribbon cable to the
cable connectors shown on
page 21.
Prior to termination, the
covers must be partially
assembled onto a connec-
tor housing, the cable
inserted between the cov-
ers and contacts and the
covers preclosed by hand,
clamping the cable in
place.
In the Manual Miniature
Application Frame
Assembly, the covers are
fully seated to complete the
mass termination and pro-
vide strain relief for the
completed connection.
For tooling information, call
Technical Support Center
1-800-522-6752.
Note: Refer to Tyco Electonics
Instruction Sheets 408-9817 (Frame
Assembly 91295-1) and 408-9909
(Cover Closing Kit 543518-1) for
complete termination/tooling infor-
mation.
24
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
2
Performance Specifications
Note: All part numbers are RoHS compliant.
Performance Specifications/
Technical Documents
Board-to-Board Connectors, Vertical and Right-Angle
Mating Force: 6.4 oz (1.78 N] max. per contact
Unmating Force: 1.0 oz [0.28 N] min. per contact
Durability: Tested to 200 cycles min.
Current Rating: (30°C T rise): .5 ampere per contact
Operating Temperature Range: -65°C to +105°C
Termination Resistance: 16 milliohms max. (initial)
Insulation Resistance: 5000 megohms min. (initial)
Dielectric Withstanding Voltage: 300 VAC
Cable-to-Board Connectors
Mating Force: 6.4 oz (1.78 N] max. per contact
Unmating Force Without Latch: .5 oz [0.14 N] min. per contact
Durability: Tested to 200 cycles min.
Current Rating: (10°C T rise): .5 ampere per contact
Operating Temperature Range: -65°C to +105°C
Termination Resistance: 25 milliohms max. (initial and final)
Insulation Resistance: 5000 megohms min. (initial)
Dielectric Withstanding Voltage: 300 VAC
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-1332 AMPMODU 50/50 Grid Vertical Board-to-Board Connectors
108-1443 AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable
Connectors
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-7010 AMPMODU 50/50 Grid Connector System
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-9817 Manual Miniature Application Frame Assembly 91295-1
408-9909 Cover Closing Kit 543518-1
25
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
AMPMODU System 50 Connectors
AMPMODU System 50
The AMPMODU System 50
connector family includes a
wide variety of high density
board-to-board (thru-hole
and surface-mount) and
cable-to-board connectors.
AMPMODU System 50 is
composed of one- and two-
row receptacles and post
headers on .050 x .100
[1.27 x 2.54] spacing
between contacts for
extreme density and
efficient use of printed
circuit board area.
AMPMODU System 50
receptacles and header
assemblies can be
categorized in three groups:
board-mount headers,
board-mount receptacles
and cable-to-board
receptacles. Receptacle
contacts and mating .015
[0.38] square posts are
formed from high
conductivity copper alloy
and are selectively plated
with gold to promote higher
performance and reliability.
Board-mounted thru-hole
post headers and
receptacle connectors are
available for right-angle
and vertical mating
configurations. Surface-
mounted connectors are
available in vertical, double
row styles for parallel
stacking applications.
Shrouded post headers
provide polarization to
mating cable receptacles
and aid alignment of mating
connectors. Unshrouded
headers allow close
stacking of daughter cards.
Vertical stacking connectors
space parallel mated
boards as shown in the
illustration on page 63.
Housings on all board-
mount assemblies are made
of high temperature tolerant
materials and incorporate
stand-offs for free drainage
of flux cleaning solutions.
Cable-to-board connectors
have integral latches for
positive locking to shrouded
mating headers (thru-hole or
surface-mount). Ribbon
cable connectors mass
terminate 30 AWG [0.05
mm2] solid and 32 AWG
[0.03 mm2] stranded, .025
[0.64] centerline ribbon
cable with PVC insulation.
Connectors for mass
termination to FFC cable or
flexible etched circuitry
have dual beam contacts;
options include shielded
cable and solder tabs. Both
types of cable connectors
are available as component
parts and as completed
assemblies.
The variety of components
and application possibilities,
combined with small size
and outstanding quality,
make AMPMODU
System 50 suitable for high
density systems.
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
■ Certified by
Canadian Standards
Association*,
File No. LR 7189
*CSA certification pending on
certain products, as noted.
Dimensioning:
Dimensions are in inches and millimeters.
Values in brackets are metric equivalents. Metric
symbols used are:
mm (millimeter)
cm (centimeter)
m (meter)
mm2(square millimeter)
C (Celsius)
N (newton)
kg (kilogram)
■ Produced under a
Quality Management
System certified
to ISO 9001
A copy of the
certificate is available
upon request.
R
R
ISO
Certified
9001
26
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Board-to-Board Connectors,
Thru-Hole
Product Facts
■High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
■Single row; select sizes 4
thru 50 positions
■Double row; select sizes 10
thru 100 positions
■Stand-offs for ease of
cleaning
■High temperature tolerant
thermoplastic housings
■Shrouded and unshrouded
headers available in single
and double row, vertical
and right-angle
configurations
The AMPMODU System 50
interconnection system is
designed to better meet
industry’s need for a high
density interconnect
system. The Board
Mounted Thru-Hole
Headers are available in
shrouded and unshrouded
versions. They are
composed of single and
double row post headers
with .050 x .100
[1.27 x 2.54] spacing
between contacts for
extreme density and
efficient use of printed
circuit board area. The
headers are available in
4 through 50 positions, in
a single row configuration,
and 10 through 100
positions, in a double row
design.
Board mounted post
headers are available in
right-angle and vertical
configurations. Shrouded
post headers provide
polarization and alignment
features for mating printed
circuit boards and cable
connectors, while
unshrouded headers allow
close stacking of daughter
cards. Housings for the
headers are made of black
thermoplastic material with
a 94V-0 rating. The
housings have stand-offs
for free drainage of flux
cleaning solutions.
AMPMODU Interconnection System
27
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
Single Row, Right-Angle
with Solder Clips
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 38,
49 & 50
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part Numbers
Pos. A
4.330 [8.38] 5-104074-7
5.380 [9.65] 5-104074-2
6.430 [10.92] 5-104074-8
8.530 [13.46] 6-104074-0
10 .630 [16.00] 5-104074-1
12 .730 [18.54] 6-104074-1
15 .880 [22.35] 5-104074-3
20 1.130 [28.70] 5-104074-4
22 1.230 [31.24] 6-104074-4
25 1.380 [35.05] 5-104074-5
28 1.530 [38.86] 7-104074-0
30 1.630 [41.40] 5-104074-6
36 1.930 [49.02] 6-104074-6
40 2.130 [54.10] 6-104074-7
45 2.380 [60.45] 6-104074-8
50 2.630 [66.80] 6-104074-9
*Circuit identification feature omitted on 4, 5 and 6 position headers.
Notes:
1. Solder Clips located as shown for 10 through 30 position headers.
2. Solder Clips located as shown for 4 through 8 and 36 through 50 position headers.
Circuit Identification
Feature*
See Note 2.
See Note 1.
Solder
Clip
.100
[2.54]
.060
[1.52]
2 Plc.
AMPMODU Interconnection System
28
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
Single Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .00050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 38,
49 & 50
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Part Numbers
No. of Dimension Post Length
Pos. A .100 [2.54] .145 [3.68]
4.330 [8.38] 5-104071-7 —
5.380 [9.65] 5-104071-2 —
6.430 [10.92] 5-104071-8 —
8.530 [13.46] 6-104071-0 —
10 .630 [16.00] 5-104071-1 —
12 .730 [18.54] 6-104071-1 5-104804-3
13 .780 [19.81] 6-104071-2 —
15 .880 [22.35] 5-104071-3 5-104804-2
17 .980 [24.89] 6-104071-3 —
20 1.130 [28.70] 5-104071-4 —
22 1.230 [31.24] 6-104071-4 —
25 1.380 [35.05] 5-104071-5 —
30 1.630 [41.40] 5-104071-6 —
36 1.930 [49.02] 6-104071-6 —
40 2.130 [54.10] 6-104071-7 —
50 2.630 [66.80] 6-104071-9 —
*Circuit identification feature omitted on 4, 5, and 6 position headers.
.060 [1.52]
2 Plc.
Circuit Identification
Feature*
Post Length
(See chart
below)
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
AMPMODU Interconnection System
29
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
with Solder Clips
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031 Part Numbers
No. of Dimension Post Length
Pos. A .100 [2.54] .145 [3.68]
8.330 [8.32] 5-104069-8 —
10 .380 [9.65] 5-104069-4 6-104477-2
12 .430 [10.92] — 5-104477-8
14 .480 [12.19] 6-104069-0 —
16 .530 [13.46] 6-104069-1 —
20 .630 [16.00] 5-104069-1 5-104477-2
24 .730 [18.54] 6-104069-2 6-104477-0
26 .780 [19.81] 6-104069-3 —
30 .880 [22.35] 5-104069-5 5-104477-3
34 .980 [24.89] 6-104069-4 —
40 1.130 [28.70] 5-104069-6 5-104477-4
50 1.380 [35.05] 5-104069-2 5-104477-5
60 1.630 [41.40] 5-104069-7 5-104477-9
68 1.830 [46.48] 6-104069-8 —
72 1.930 [49.02] 6-104069-6 5-104477-1
80 2.130 [54.10] 5-104069-3 5-104477-6
100 2.630 [66.80] 6-104069-7 5-104477-7
*Circuit identification feature omitted on 8, 10 and 12 position headers.
Notes:
1. Solder Clips located as shown for 16 through 100 position headers.
2. Solder Clips located as shown for 8 through 12 and 60 through 100 position headers.
.060
[1.52]
2 Plc.
Circuit Identification
Feature*
Post Length
(See chart
below)
Solder
Clip
See Note 2.
See Note 1.
AMPMODU Interconnection System
30
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contact — Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127]nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Part Numbers
No. of Dimension Post Length
Pos. A .100 [2.54] .145 [3.68]
10 .380 [9.65] 5-104068-2 —
12 .430 [10.92] 5-104068-8 —
14 .480 [12.19] 5-104068-9 —
16 .530 [13.46] 6-104068-0 5-104666-9
20 .630 [16.00] 5-104068-1 5-104666-1
24 .730 [18.54] 6-104068-1 6-104666-0
26 .780 [19.81] 6-104068-2 —
30 .880 [22.35] 5-104068-3 5-104666-2
34 .980 [24.89] 6-104068-3 —
40 1.130 [28.70] 5-104068-4 5-104666-3
44 1.230 [31.24] 6-104068-4 —
50 1.380 [35.05] 5-104068-5 5-104666-4
60 1.630 [41.40] 5-104068-6 5-104666-7
68 1.830 [46.48] 6-104068-8 5-104666-8
72 1.930 [49.02] 6-104068-5 —
80 2.130 [54.10] 6-104068-6 5-104666-5
100 2.630 [66.80] 6-104068-7 5-104666-6
*Circuit identification feature omitted on 10 and 12 position headers.
.060 [1.52]
2 Plc. Circuit Identification
Feature*
Post Length
(See chart
below)
AMPMODU Interconnection System
31
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
With Card Slots
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — page 39
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
10 .394 [10.01] 5-104076-5
20 .644 [16.36] 5-104076-1
30 .894 [22.71] 5-104076-6
40 1.144 [29.06] 5-104076-3
50 1.394 [35.41] 5-104076-7
60 1.644 [41.76] 5-104076-2
80 2.144 [54.46] 5-104076-4
100 2.644 [67.16] 5-104076-8
Circuit Identification
Feature
.125
[3.18]
32
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Single Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 37,
38, 49, & 50
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031 No. of Dimension Part
Pos. A Numbers
4.215 [5.46] 5-104186-1
8.415 [10.54] 5-104186-5
12 .615 [15.62] 5-104186-7
15 .765 [19.43] 5-104186-9
17 .865 [21.97] 6-104186-0
20 1.015 [25.78] 6-104186-1
25 1.265 [32.13] 6-104186-3
30 1.515 [38.48] 6-104186-5
31 1.565 [39.75] 7-104186-0
40 2.015 [51.18] 6-104186-7
33
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 37,
38, 49, & 50
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
4.215 [5.46] 5-104178-1
6.315 [8.00] 5-104178-3
8.415 [10.54] 5-104178-5
10 .515 [13.08] 5-104178-6
20 1.015 [25.78] 6-104178-1
25 1.265 [32.13] 6-104178-3
.100
[2.54]
.125
[3.18] .015
[0.38]
.050 Typ.
[1.27]
A.100
[2.54] .048
[1.22]
.096
[2.44]
34
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
34
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 39,
40, 45, 51 & 52
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
10 .265 [6.73] 5-104118-3
20 .515 [13.08] 5-104118-7
30 .765 [19.43] 6-104118-0
40 1.015 [25.78] 6-104118-2
50 1.265 [32.13] 5-104118-1
60 1.515 [38.48] 6-104118-4
80 2.015 [51.18] 6-104118-6
100 2.515 [63.88] 6-104118-7
AMPMODU Interconnection System
35
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Note: All part numbers are RoHS compliant.
Headers
Shrouded and Unshrouded
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 39,
40, 45, 51, & 52
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 42
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
8.215 [5.46] 5-103916-3
20 .515 [13.08] 5-103916-2
30 .765 [19.43] 5-103916-9
36 .915 [23.24] 6-103916-8
40 1.015 [25.78] 6-103916-1
50 1.265 [32.13] 6-103916-3
60 1.515 [38.48] 6-103916-4
80 2.015 [51.18] 6-103916-6
100 2.515 [63.88] 6-103916-7
.125
[3.18]
.015
[0.38]
.100
[2.54]
.100
[2.54]
.050
[1.27] T
yp. .100
[2.54]
.196
[4.98]
.048
[1.22]
36
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Receptacles
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Product Facts
■High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
■Right-angle and vertical
styles
■Single row; select sizes 5
thru 50 positions
■Double row; select sizes 10
thru 100 positions
■Contacts are selectively
plated with gold
■Stand-offs for removal of
solder flux
The AMPMODU System 50
thru-hole receptacles offer
a wide variety of high
density board-to-board
connectors. The .050 [1.27]
spacing between each
contact provides an
extremely dense
interconnect package and
results in a more efficient
use of the printed circuit
board space.
AMPMODU System 50
thru-hole receptacles are
available in right-angle and
vertical configurations and
are composed of single
and double row versions.
The single row versions are
available in select sizes of
5 thru 50 positions and
double row in positions
from 10 thru 100.
Receptacle contacts and
mating .015 [0.38] square
posts are formed from high
conductivity copper alloy
and are selectively plated
with gold for higher
performance and reliability.
The receptacle housings
are made of black
thermoplastic, with a 94V-0
rating to withstand high
temperatures of reflow
soldering and incorporate
stand-offs for free drainage
of flux cleaning solutions.
37
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Note: All part numbers are RoHS compliant.
Receptacles
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Right-Angle
With Solder Clips
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 32
& 33
PC Board Hole Layout — page 41
Technical Documents —page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
10 .544 [13.82] 5-104196-2
15 .794 [20.17] 5-104196-4
20 1.044 [26.52] 5-104196-5
Notes:
1. Solder Clips located as shown for 10 through 25 position receptacles.
2. Solder Clips located as shown for 5 and 25 position receptacles.
Circuit Identification
Feature
See Note 2.
See Note 1.
Solder
Clip
38
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacles
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Vertical
No. of Dimension Part
Pos. A Numbers
10 .544 [13.82] 5-104192-2
12 .644 [16.35] 5-104192-3
15 .794 [20.17] 5-104192-4
20 1.044 [26.52] 5-104192-5
30 1.544 [39.22] 5-104192-7
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 27,
28, 32, & 33
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
39
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Note: All part numbers are RoHS compliant.
Receptacles
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 31,
34 & 35
PC Board Hole Layout — page 41
Technical Documents —page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
10 .294 [7.47] 5-103911-1
20 .544 [13.82] 5-103911-2
30 .794 [20.17] 5-103911-7
40 1.044 [26.52] 5-103911-5
50 1.294 [32.87] 5-103911-4
60 1.544 [39.22] 5-103911-3
80 2.044 [51.92] 5-103911-6
100 2.544 [64.62] 5-103911-8
Notes:
1. Solder Clips located as shown for 20 through 100 position receptacles.
2. Solder Clips located as shown for 10, 60, 80 and 100 position receptacles.
Circuit Identification
Feature
See Note 2.
See Note 1.
Solder
Clip
40
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacles
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
Part Numbers
No. of Dimension Post Length
Pos. A .100 [2.54] .145 [3.68]
10 .294 [7.47] 5-104078-3 —
20 .544 [13.82] 5-104078-1 —
24 .644 [16.36] 5-104078-9 —
30 .794 [20.17] 5-104078-4 —
34 .894 [22.71] 6-104078-0 —
40 1.044 [26.52] 5-104078-2 —
50 1.294 [32.87] 5-104078-5 5-104744-7
60 1.544 [39.22] 5-104078-6 —
68 1.744 [44.30] 6-104078-3 —
80 2.044 [51.92] 5-104078-7 5-104744-4
100 2.544 [64.62] 5-104078-8 5-104744-5
Circuit Identification
Feature
Post Length
(See chart
below)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 29,
30, 34, 35 & 44
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
41
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Recommended PC Board Hole Layouts, Thru-Hole Board-to-Board Connectors
PC Board Hole Layouts
Single Row, Right-Angle
with Solder Clips
Note: Consult TE for customer
drawings detailing tolerances.
* This dimension is for Shrouded,
Single Row Right-Angle Headers
only.
** This dimension is for Single Row
Right-Angle Receptacles only.
Double Row, Right-Angle
with Solder Clips
Note: Consult TE for customer
drawings detailing tolerances.
* This dimension is for Shrouded,
Double Row Right-Angle Headers
only.
** This dimension is for Double Row
Right-Angle Receptacles only. No. of Dimensions
Pos. BCDE
10 .200 [5.08] — .100 [2.54] —
20 .450 [11.43] .350 [8.89] .050 [1.27] —
24 .550 [13.97] .450 [11.43] .050 [1.27] —
26 .600 [15.24] .500 [12.70] .050 [1.27] —
30 .700 [17.78] .600 [15.24] .050 [1.27] —
34 .800 [20.32] .700 [17.78] .050 [1.27] —
40 .950 [24.13] .850 [21.59] .050 [1.27] —
50 1.200 [30.48] 1.100 [27.94] .050 [1.27] —
60 1.450 [36.83] 1.350 [34.29] .050 [1.27] .675 [17.15]
68 1.650 [41.91] 1.550 [39.37] .050 [1.27] .775 [19.69]
72 1.750 [44.45] 1.650 [41.91] .050 [1.27] .825 [20.96]
80 1.950 [49.53] 1.850 [46.99] .050 [1.27] .925 [23.50]
100 2.450 [62.23] 2.350 [59.69] .050 [1.27] 1.175 [29.85]
.037 Dia.
[0.94] Typ.
(Soldered mechanical
solder clip)
Plated-Thru Hole
.022 Dia.
[0.56] Typ.
Plated-Thru Hole
PC Board Edge
.022 Dia.
[0.56] Typ.
Plated-Thru Hole
PC Board Edge
.335**
[8.51]
No. of Dimensions
Pos. BCDE
4.150 [3.81] — .075 [1.91] —
5.200 [5.08] — .100 [2.54] —
6.250 [6.35] — .125 [3.18] —
8.350 [8.89] — .175 [4.45] —
10 .450 [11.43] .350 [8.89] .050 [1.27] —
12 .550 [13.97] .450 [11.43] .050 [1.27] —
15.700 [17.78] .600 [15.24] .050 [1.27] —
20.950 [24.13] .850 [21.59] .050 [1.27] —
22 1.050 [26.67] .950 [24.13] .050 [1.27] —
25 1.200 [30.48] 1.100 [27.94] .050 [1.27] —
28 1.350 [34.29] 1.250 [31.75] .050 [1.27] .625 [15.88]
30 1.450 [36.83] 1.350 [34.29] .050 [1.27] .675 [17.15]
36 1.750 [44.45] 1.650 [41.91] .050 [1.27] .825 [20.96]
40 1.950 [49.53] 1.850 [46.99] .050 [1.27] .925 [23.50]
45 2.200 [55.88] 2.100 [53.34] .050 [1.27] 1.050 [26.67]
50 2.450 [62.23] 2.350 [59.69] .050 [1.27] 1.175 [29.85]
.037 Dia.
[0.94] Typ.
(Soldered
mechanical
solder clip)
Plated-Thru
Hole
42
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Recommended PC Board Hole Layouts, Thru-Hole
Board-to-Board Connectors (Continued)
PC Board Hole Layouts
Single Row
Without Solder Clips
Note: Consult TE for customer
drawings detailing tolerances.
Double Row
Without Solder Clips
Note: Consult TE for customer
drawings detailing tolerances.
No. of Dimension
Pos. B
4.150 [3.81]
5.200 [5.08]
6.250 [6.35]
8.350 [8.89]
10.450 [11.43]
12 .550 [13.97]
13 .600 [15.24]
15.700 [17.78]
No. of Dimension
Pos. B
8.150 [3.81]
10 .200 [5.08]
12 .250 [6.35]
14 .300 [7.62]
16 .350 [8.89]
20 .450 [11.43]
24 .550 [13.97]
26 .600 [15.24]
30 .700 [17.78]
34 .800 [20.32]
No. of Dimension
Pos. B
36 .850 [21.59]
40 .950 [24.13]
44 1.050 [26.67]
50 1.200 [30.48]
60 1.450 [36.83]
68 1.650 [41.91]
72 1.750 [44.45]
80 1.950 [49.53]
100 2.450 [62.23]
.022 Dia.
[0.56] TYP.
Plated-Thru Hole
.022 Dia.
[0.56] TYP.
Plated-Thru
Hole
No. of Dimension
Pos. B
17 .800 [20.32]
20 .950 [24.13]
221.050 [26.67]
25 1.200 [30.48]
301.450 [36.83]
31 1.500 [38.10]
36 1.750 [44.45]
401.950 [49.53]
502.450 [62.23]
43
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Surface-Mount Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Board-to-Board Connectors,
Surface-Mount
Product Facts
■Surface-mount option for
parallel board-to-board
applications; completely
intermateable with
AMPMODU System 50
thru-hole board-to-board
and cable-to-board systems
■Double row, vertical,
shrouded header and
receptacle assemblies
■Available in select sizes
from 10 through 100
positions
■High Density; contacts
spaced on .050 x .100 [1.27
x 2.54] centers; compact
footprint
■Compatible with standard
surface-mount processes
■Stand-offs for free drainage
of flux cleaning solutions;
visible solder joints for easy
inspection
■Simple, low insertion-force
holddown for process
retention and long-term
strain relief for solder joints
■Available in tape and reel
packaging (with vacuum
covers) for automatic
placement.
The high-density surface-
mount connector is another
mounting option in the
AMPMODU System 50
connector family.
This surface-mount system
is fully intermateable with
the AMPMODU System 50
thru-hole and cable-to-
board connectors.
Additionally, the design of
the mating interface has not
been changed, maintaining
the same high reliability as
the thru-hole product.
The surface-mount system
includes double row,
vertical, shrouded header
and receptacle assemblies
in select sizes from 10
through 100 positions. It
meets the tight dimensional
requirements of surface-
mount technology. The
simple, low insertion-force
holddown provides both
processing retention and
long-term strain relief for
the solder joints in the
headers and receptacles.
44
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Surface-Mount Headers, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Note: All part numbers are RoHS compliant.
Headers
Double Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact under-
plated .000050 [0.00127] nickel
Holddown — Copper alloy, plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
Board-to-Board Spacing — page 63
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25035
Recommended PC Board Layout
No. of Dimensions Part Numbers
Pos. Pkg in Pkg in
ABCDE
Tube Tape & Reel*
10 .380 [9.65] .200 [5.08] — .025 [0.64] — 5-104549-1 5-147377-1
12 .430 [10.92] .250 [6.35] ———6-104549-1 —
20 .630 [16.00] .450 [11.43] .150 [3.81] .150 [3.81] — 5-104549-2 5-147377-2
24 .730 [18.54] .550 [13.97] .200 [5.08] .200 [5.08] — 5-104549-3 5-147377-9
30 .880 [22.35] .700 [17.78] .275 [6.99] .275 [6.99] — 5-104549-5 5-147377-3
40 1.130 [28.70] .950 [24.13] .400 [10.16] .400 [10.16] — 5-104549-6 5-147377-4
50 1.380 [35.05] 1.200 [30.48] .525 [13.34] .525 [13.34] .025 [0.64] 5-104549-7 5-147377-5
60 1.630 [41.40] 1.450 [36.83] .650 [16.51] .650 [16.51] .000 5-104549-8 5-147377-6
80 2.130 [54.10] 1.950 [49.53] .900 [22.86] .900 [22.86] .000 5-104549-9 5-147377-7
100 2.630 [66.80] 2.450 [62.23] 1.150 [29.21] 1.150 [29.21] .000 6-104549-0 5-147377-8
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover
.042±.003
[1.07± 0.08] Dia. Typ.
(Plated-Thru Hole)
Holes for holddowns are not
required for parts packaged
in tape and reel.
A±.003
[.08] .057±.010
[1.45±.25]
.435±.007
[11.05±.18]
.100
[2.54]
.050
[1.27] Typ.
.045
[1.14] Ref.
.031±.010
[.79±.25]
.284
[7.21]
.344 [8.74]
.053±.006
[1.35±0.15]
.125
[3.18]
Detail A
45
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Surface-Mount Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Note: All part numbers are RoHS compliant.
Receptacles,
Surface Mount
Double Row, Vertical
Material and Finish
Housing — Glass-filled thermpolastic,
black, 94V-0 rated
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact
underplated .000050 [0.00127] nickel
Holddown — Copper alloy; duplex
plated .000150 [0.00381] tin over
.000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 29,
30, 34, 35 & 44
Board-to-Board Spacing — page 63
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25035
No. of Dimensions Part Numbers
Pos. ABCPkg in Tube Pkg in Tape & Reel*
10 .294 [7.47] .200 [5.08] .400 [10.16] 5-104550-1 5-147378-1
20 .544 [13.82] .450 [11.43] .650 [16.51] 5-104550-2 5-147378-2
24 .644 [16.36] .550 [13.97] .750 [19.05] 5-104550-3 5-147378-9
30 .794 [20.17] .700 [17.78] .900 [22.86] 5-104550-4 5-147378-3
40 1.044 [26.52] .950 [24.13] 1.150 [29.21] 5-104550-5 5-147378-4
50 1.294 [32.87] 1.200 [30.48] 1.400 [35.56] 5-104550-6 5-147378-5
60 1.544 [39.22] 1.450 [36.83] 1.650 [41.91] 5-104550-7 5-147378-6
80 2.044 [51.92] 1.950 [49.53] 2.150 [54.61] 5-104550-8 5-147378-7
100 2.544 [64.62] 2.450 [62.23] 2.650 [67.31] 5-104550-9 5-147378-8
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover
Recommended PC Board Layout
.042±.003 Dia.Typ.
[1.07±0.08] (Plated-Thru hole)
Holes for holddowns are not
required for parts packaged
in tape and reel.
.025
[0.64] Ref.
.125±.008
[3.18±0.20]
2 Plc.
.198±.002 [5.03±.05]
.100
[2.54]
A
.053±.006
[1.35±0.15]
.370±.003
[9.40±0.08]
.050
[1.27]
.065±.001
[1.65±0.03] Dia. Typ. (Pad)
.285
[7.24] Ref.
46
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline
FFC Cable
Cable-to-Board Connectors,
FFC Cable
The cable-to-board .050
[1.27] center FFC
receptacle connectors are
part of the AMPMODU
System 50 family for
terminating flexible flat
conductor cable and
flexible etched circuitry.
The FFC receptacle uses a
dual beam contact with 30
microinches of gold plating.
The FFC receptacle
connectors have an integral
latch for positive locking to
shrouded mating headers.
Flexible flat conductor cable
is a planar parallel
conductor cable. It can be
used as a one-to-one
connector or as a complex
harness, allowing split-outs
and special routing. The
cable is comprised of .026
[0.66] wide x .003 [0.08]
thick conductors made of
copper per QQ-C-502 and
insulated with a flame
retardant polyester film.
The FFC contacts are
available in receptacle and
Product Facts
■Signal application only,
1.5 amperes maximum
single circuit
■Single or double row
connectors
■Terminates flexible flat
conductor cable and flexible
etched circuitry
■Shielded cable provides for
customizing
■Center latch housing
providing positive latching
solder tab. Receptacle
contacts are made of
phosphor bronze with a
finish of plated gold duplex,
while the solder tab
contacts are finished in a
bright tin-lead overall.
The complete product line
provides solder tabs for
board mounting at low cost
and custom shielding of the
cable.
47
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline
FFC Cable] (Continued)
Flexible Flat
Conductor Cable
Custom Designed
Cable Assemblies
TE can supply customized
flexible flat conductor cable
assemblies using the com-
ponents shown on pages
48 thru 54. Typical exam-
ples of these cable assem-
blies are shown to the right.
And, to meet the internal
shielding requirements of
today’s complex electronic
equipment, custom
designed shielded FFC
cable assemblies can be
made to your specific
specifications.
Single Row
Receptacle
Housing
Solder Tabs Single Row
Receptacle
Housing
Double Row
Receptacle
Housing
FFC Cable,
.050 [1.27]
Centerline
FFC Cable,
.050 [1.27]
Centerline
Solder Tabs
48
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
FFC Contacts, .050 x .100 [1.27 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
FCC
Contacts
C*
.725
[18.42]
.0085
[0.22] .016
[0.41]
B
C*
D
Accepts .015 [0.38] Sq. Post
.125-.350 [3.18-8.89] Long
Material and Finish
Phosphor bronze; plated gold
duplex or bright tin-lead overall
(See chart.)
Related Product Data
Performance Characteristics —
page 63
Housings — pages 49-52
Application Tooling — page 60-62
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
Receptacle Solder Tab
Contacts Application Tooling
Dimensions Part Numbers
Type Config. Part No./
Machine Machine With
Finish B C* D Programmer
Receptacle Strip 1-487547-11—.520 .725
[13.21] [18.42]
Strip 487923-42.245 .480 .685
[6.22] [12.19] [17.40]
Solder Tab Strip 487923-53.245 .480 .685 224910-4 318619-4
[6.22] [12.19] [17.40] (120 V) (120 V)
Strip 487940-42.110 .345 .550 224910-6 318619-6
[2.79] [8.76] [13.97] (240 V) (240 V)
Contact Splice Strip 487941-44——
.385
[9.78]
Receptacle Strip 1-487547-25—.520 .725
[13.21] [18.42]
1Duplex plated .000030 [0.00076] gold on mating area, .000100 [0.00254] min. bright tin in crimp area, with entire con-
tact underplated .000050 [0.00127] min. nickel.
2Plated .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel.
3Duplex plated .000015 [0.00038] gold on solder tab end, .000100 [0.00254] min. bright tin in crimp area, with entire
contact underplated .000050 [0.00127] min. nickel.
4Plated .000150 [3.81µm] min. bright tin over .000050 [1.27µm] min. nickel.
5Duplex Plated .000150 [0.00038] gold on mating area, .000100 [0.00254] min bright tin in crimp area, with entire con-
tact underplated .000050 [0.00127] min. nickel.
*After cut-off from carrier strip.
Receptacle Strip
Solder Tab Strip
D
.100
[2.54] Typ.
.211
[5.36] Max.
.0085±.0005
[0.216±0.013] Typ.
Localized Plate Area 4
49
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board
Receptacle
Housings
Material and Finish
Housing — Black thermoplastic, flame
retardant, 94V-0 rated
Related Product Data
Performance Characteristics —
page 63
Receptacle Contacts — page 48
Mateable Headers — pages 27, 28,
32 & 33
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
Plain Style Housings
Latch Style Housings
.585
[14.86]
B
B
.585
[14.86]
.050 Typ
[1.27] Typ.
.047
[1.19]
(2 Pls.) .275
[6.98]
A
.294
[7.47]
.098
[2.49]
A
.047
[1.19]
(2 Pls.)
.098
[2.49]
.050 Typ
[1.27] T
yp.
Plain Style Housings
Latch Style Housings
50
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
Note: All part numbers are RoHS compliant.
Receptacle
Housings
Latch Style Housing
AMPMODU System 50 Header, Shrouded
(Right-Angle Post shown
for ref. only.)
AMPMODU System 50 Header, Unshrouded
(Straight Post shown for ref. only.)
Post Removed
Plain Housings,
Stacked Side-to-Side
(See Note 1 below.)
Plain Housing,
Stacked End-to-End
(See Notes
1 & 2 below.)
Typical Cable-to-Board Application
of Latch Style Receptacle Housing
Typical Cable-to-Board Application
of Plain Receptacle Housing
Notes: 1. Plain housings are side-to-side stackable on either straight or
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the posts located between the adjoining
housings must be removed to provide housing end clearance.
No. of Dimensions Part Numbers
Pos. AB Plain Receptacle Housing Latch Style Receptacle Housing
4.150 [3.18] .244 [6.20] 487544-1 487545-1
5.200 [5.08] .294 [7.47] 487544-2 487545-2
6.250 [6.35] .344 [8.74] 487544-3 487545-3
7.300 [7.62] .394 [10.01] 487544-4 487545-4
8.350 [8.89] .444 [11.28] 487544-5 487545-5
10 .450 [11.43] .544 [13.82] 487544-7 487545-7
12.550 [13.97] .644 [16.36] 487544-9 487545-9
13 .600 [15.24] .694 [17.63] — 1-487545-0
15 .700 [17.78] .794 [20.17] 1-487544-2 1-487545-2
16.750 [19.05] .844 [21.44] 1-487544-3 —
17 .800 [20.32] .894 [22.71] 1-487544-4 1-487545-4
20.950 [24.13] 1.044 [26.52] 1-487544-7 1-487545-7
22 1.050 [26.67] 1.144 [29.06] 1-487544-9 1-487545-9
251.200 [30.48] 1.294 [32.87] 2-487544-2 2-487545-2
26 1.250 [31.75] 1.343 [34.11] — 2-487545-3
281.350 [34.29] 1.443 [36.65] — 2-487545-5
30 1.450 [36.83] 1.544 [39.22] — 2-487545-7
361.750 [44.45] 1.844 [46.84] 3-487544-3 3-487545-3
40 1.950 [49.53] 2.044 [51.92] — 3-487545-7
452.200 [55.88] 2.294 [58.27] — 4-487545-2
50 2.450 [62.23] 2.544 [64.62] 4-487544-7 4-487545-7
Note: Other sizes of receptacle housings (plain and latch style) can be made available, consult TE.
51
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board
Receptacle
Housings
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 63
Receptacle Contacts — page 48
Mateable Headers — pages 29, 30,
34, 35, & 44
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
Plain Style Housings
B
.050 Typ
[1.27] Typ.
.047
[1.19]
(2 Plc.)
.100
[2.54]
.198
[5.03]
A
.585
[14.86]
Plain
.050 Typ
[1.27] Typ.
.047
[1.19]
(2 Plc.)
.100
[2.54]
.198
[5.03]
.375
[9.53]
A
B
.585
[14.86]
Latch
Plain Style Housings
Latch Style Housings
Latch Style Housings
52
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
Note: All part numbers are RoHS compliant.
Receptacle
Housings
Latch Style Housing (Shown)
AMPMODU System 50 Header,
Shrouded (Right-Angle Post
shown for ref. only.)
AMPMODU System 50 Header, Unshrouded
(Straight Post shown for ref. only.)
Post Removed
Plain Housing,
Stacked End-to-End
(See Notes 1 & 2 below.)
Typical Cable-to-Board Application
of Plain Receptacle Housing
Typical Cable-to-Board Application
of Latch Style Receptacle Housing
Notes: 1. Plain housings are end-to-end stackable on either straight or
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the two posts located between the adjoining
housings must be removed to provide housing end clearance.
No. of Dimensions Plain Housing Latch Style Housing
Pos. ABPart Numbers Part Numbers
8.150 [3.81] .247 [6.27] 487938-8 487937-8
10 .200 [5.08] .297 [7.54] 1-487938-0 1-487937-0
12.250 [6.35] .374 [8.81] 1-487938-2 1-487937-2
14 .300 [7.62] .397 [10.08] 1-487938-4 1-487937-4
16.350 [.889] .447 [11.35] 1-487938-6 1-487937-6
20 .450 [11.43] .547 [13.89] 2-487938-0 2-487937-0
24.550 [13.97] .647 [16.43] 2-487938-4 2-487937-4
26 .600 [15.24] .697 [17.7] 2-487938-6 2-487937-6
30 .700 [17.78] .797 [20.24] 3-487938-0 3-487937-0
34.800 [20.32] .897 [22.78] 3-487938-4 3-487937-4
40 .950 [24.13] 1.047 [26.59] 4-487938-0 4-487937-0
441.050 [26.67] 1.147 [29.13] 4-487938-4 4-487937-4
50 1.200 [30.48] 1.297 [39.94] 5-487938-0 5-487937-0
601.450 [36.83] 1.547 [39.29] — 6-487937-0
72 1.750 [44.45] 1.847 [46.91] 7-487938-2 7-487937-2
80 1.950 [49.53] 2.047 [51.99] 8-487938-0 8-487937-0
100 2.450 [62.23] 2.547 [64.69] 487938-1 487937-1
Note: Other sizes of receptacle housings, up to 120 positions, can be made available, consult TE.
53
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline, Cable-to-Board
ZIF-Line
Connectors
Material and Finish
Housing and Cover — Black
thermoplastic, flame retardant,
94V-0 rated
Contacts — Phosphor bronze, plated
.000150 [0.00381] min. bright tin over
.000050 [0.00127] min. nickel on entire
contact
Performance Characteristic
Contact Current Rating—
1 ampere†
†1 ampere rating is for single circuit.
Multiple circuits, ambient temperature
and conductor size affect current
carrying capacity.
Related Product Data
FFC Cable (with Tin-Plated
Prepared Ends) —
Consult TE.
Technical Documents — page 64
Product Specification 108-16025
Application Specification
114-16014
Pos. 1
Identification
.240
[6.10]
.240
[6.10]
.040
[1.02]
.010
[0.25] .105
[2.67]
.310
[7.87]
.100
[2.54]
.050
[1.27]
.020
[0.508]
.155
[3.94]
A
B
.050 Typ
[1.27] Typ.
.100 Typ
[2.54] T
yp.
.210 Typ
[5.33] Min.
.004-.012
[0.102-0.305]
Thk.
Note: ZIF-Line connector illustrated above with
cover in closed position.
.050±.002*Dia. Typ
[1.27±0.05] Dia. Typ.
.031±.003 Dia. Typ
[0.79±0.08] Dia. Typ.
.100±.002
[2.54±0.05]
Pos. 1
**
Recommended Mounting Hole Pattern
**±.002 [±0.05] tolerance not to accumulate
within one mounting hole pattern.
**This mounting hole required for even-numbered
connector sizes only.
FFC Cable or
Flexible Etched Circuitry
with Prepared Ends*
ZIF-Line Connector
(Cover Open)
ZIF-Line Connector
(Termination
Completed with
Cable Inserted and
Cover Closed)
*FFC cable with tin-plated prepared ends can be made available, consult TE.
Note: Special preparation of cable is required, refer to TE Application Specification No. 114-16014.
Typical Flexible Flat Conductor Cable-to-Board Application
Vertical Cable Entry
54
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
Note: All part numbers are RoHS compliant.
ZIF-Line
Connectors
No. of Dimensions Connector
Pos. AB
Part
Numbers
5.470 [11.94] .410 [10.41] 5-487576-0
6.520 [13.21] .460 [11.68] 5-487576-1
7.570 [14.48] .510 [12.95] 4-487576-8
8.620 [15.75] .560 [14.22] 4-487576-9
9.670 [17.02] .610 [15.49] 487576-1
10.720 [18.29] .660 [16.76] 487576-2
11 .770 [19.56] .710 [18.03] 487576-3
12 .820 [20.83] .760 [19.30] 487576-4
13.870 [22.10] .810 [20.57] 487576-5
14.920 [23.37] .860 [21.84] 487576-6
15 .970 [24.64] .910 [23.11] 487576-7
16 1.020 [25.91] .960 [24.38] 487576-8
171.070 [27.18] 1.010 [25.65] 487576-9
18 1.120 [28.45] 1.060 [26.92] 1-487576-0
19 1.170 [29.72] 1.110 [28.19] 1-487576-1
201.220 [30.99] 1.160 [29.46] 1-487576-2
211.270 [32.26] 1.210 [30.73] 1-487576-3
22 1.320 [33.53] 1.260 [32.00] 1-487576-4
23 1.370 [34.80] 1.310 [33.27] 1-487576-5
241.420 [36.07] 1.360 [34.54] 1-487576-6
25 1.470 [37.34] 1.410 [35.81] 1-487576-7
26 1.520 [38.61] 1.460 [37.08] 1-487576-8
27 1.570 [39.88] 1.510 [38.35] 1-487576-9
28 1.620 [41.15] 1.560 [39.62] 2-487576-0
29 1.670 [42.42] 1.610 [40.89] 2-487576-1
30 1.720 [43.69] 1.660 [42.16] 2-487576-2
No. of Dimensions Connector
Pos. AB
Part
Numbers
31 1.770 [44.96] 1.710 [43.43] 2-487576-3
321.820 [46.23] 1.760 [44.70] 2-487576-4
331.870 [47.50] 1.810 [45.97] 2-487576-5
34 1.920 [48.77] 1.860 [47.24] 2-487576-6
351.970 [50.04] 1.910 [48.51] 2-487576-7
362.020 [51.31] 1.960 [49.78] 2-487576-8
37 2.070 [52.58] 2.010 [51.05] 2-487576-9
38 2.120 [53.85] 2.060 [52.32] 3-487576-0
392.170 [55.12] 2.110 [53.59] 3-487576-1
402.220 [56.39] 2.160 [54.86] 3-487576-2
41 2.270 [57.66] 2.210 [56.13] 3-487576-3
42 2.320 [58.93] 2.260 [57.40] 3-487576-4
432.370 [60.20] 2.310 [58.67] 3-487576-5
44 2.420 [61.47] 2.360 [59.94] 3-487576-6
45 2.470 [62.74] 2.410 [61.21] 3-487576-7
462.520 [64.01] 2.460 [62.48] 3-487576-8
472.570 [65.28] 2.510 [63.75] 3-487576-9
48 2.620 [66.55] 2.560 [65.02] 4-487576-0
49 2.670 [67.82] 2.610 [66.29] 4-487576-1
502.720 [69.09] 2.660 [67.56] 4-487576-2
51 2.770 [70.36] 2.710 [68.83] 4-487576-3
52 2.820 [71.63] 2.760 [70.10] 4-487576-4
53 2.870 [72.90] 2.810 [71.37] 4-487576-5
54 2.920 [74.17] 2.860 [72.64] 4-487576-6
55 2.970 [75.44] 2.910 [73.91] 4-487576-7
55
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Ribbon Cable, System 50
Cable-to-Board Connectors,
Ribbon Cable
The AMP-LATCH System 50
Ribbon Cable connector
is a receptacle connector
that will terminate ribbon
cable on .025 [0.64]
centerlines. It is available
in select sizes from 10 to
100 positions and will
accommodate 30 AWG
[0.05 mm2] solid or stranded
and 32 AWG [0.03 mm2]
stranded conductors, with
PVC cable insulation.
The housing and cover
(black) have a 94V-0 rating.
A copper alloy single
mating beam contact
provides the interconnect
between the conductor
and the .015 [0.38] square
posts on the .050 x .100
[1.27 x 2.54] grid. The
contacts are plated with
30 gold duplex plating. The
latching feature is located
on the receptacle, not the
header, and saves board
space and eliminates future
problems of “latch height
compatibility.”
Product Facts
■Preassembled housing
and cover
■One step termination
■End and daisy chain
termination
■Positive end latching of
connector to shrouded
headers
■Terminates 30 AWG
[0.05 mm2] solid or
stranded and
32 AWG [0.03 mm2]*
stranded .025 [0.64]
centerline ribbon cable
with PVC insulation
■0.5 ampere current
rating (limitedbycable)
56
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Double Row Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board, Ribbon Cable, System 50
Note: All part numbers are RoHS compliant.
Ribbon Cable
Receptacles
.228
[5.80]
.246
[6.25]
.580
[14.73]
Before
T
ermination
.198
[5.03]
.100
[2.54]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Latches — Stainless steel
Contacts — Copper alloy, plated gold
over nickel with tin in termination area
Related Product Data
Performance Characteristics —
page 63
Mateable Headers — pages 29, 30,
34, 35 & 44
Application Tooling — page 60-62
Mates with Posts —
.015 [0.38] square, .125 [3.18] long,
on.050 x .100 [1.27 x 2.54] grid
Technical Documents — page 64
Product Specification 108-1109
Application Specification
114-25029
.254
[6.45]
.228
[5.79]
.054
[1.37]
.430
[10.92]
.102
[2.59]
.335
[8.51]
.100
[2.54] .050
[1.27]
F
E
D
A
Cover
Latch
Contact
Housing
Typ.
Position #1
Indicator
C
B
No. of Dimensions Part
Pos. AB C DE FNumbers
10 .510 [12.95] .445 [11.30] .225 [5.72] .200 [5.08] .096 [2.44] .294 [7.47] 2-111196-5
14 .610 [15.49] .545 [13.84] .325 [8.26] .300 [7.62] .146 [3.71] .394 [10.01] 2-111196-6
16 .660 [16.76] .595 [15.11] .375 [9.52] .350 [8.89] .171 [4.34] .444 [11.28] 2-111196-7
20 .760 [19.30] .695 [17.65] .475 [12.07] .450 [11.43] .221 [5.61] .544 [13.82] 1-111196-8
24 .860 [20.32] .795 [20.19] .575 [14.61] .550 [13.97] .271 [6.88] .644 [16.36] 2-111196-8
26 .910 [23.11] .845 [21.46] .625 [15.88] .600 [15.24] .296 [7.52] .694 [17.63] 2-111196-9
30 1.010 [25.65] .945 [24.00] .725 [18.42] .700 [17.78] .346 [8.79] .794 [20.17] 1-111196-9
34 1.110 [28.19] 1.045 [26.54] .825 [20.96] .800 [20.32] .396 [10.06] .894 [22.71] 3-111196-0
40 1.260 [32.00] 1.195 [30.35] .975 [34.54] .950 [24.13] .471 [11.96] 1.044 [26.52] 2-111196-0
44 1.360 [34.54] 1.295 [32.89] 1.075 [27.31] 1.050 [26.67] .521 [13.23] 1.144 [29.06] 3-111196-1
50 1.510 [38.35] 1.445 [36.70] 1.225 [31.12] 1.200 [30.48] .596 [15.14] 1.294 [32.87] 2-111196-1
60 1.760 [44.70] 1.695 [43.05] 1.475 [37.47] 1.450 [36.83] .721 [18.31] 1.544 [39.22] 2-111196-2
64 1.860 [47.24] 1.795 [45.59] 1.575 [40.00] 1.550 [39.37] .771 [19.58] 1.644 [41.76] 3-111196-2
68 1.960 [49.78] 1.895 [48.13] 1.675 [42.55] 1.650 [41.91] .821 [20.85] 1.744 [44.30] 3-111196-4
72 2.060 [52.32] 1.995 [50.67] 1.775 [45.08] 1.750 [44.45] .871 [22.12] 1.844 [46.84] 2-111196-3
80 2.260 [57.40] 2.195 [55.75] 1.975 [50.17] 1.950 [49.53] .971 [24.66] 2.044 [51.92] 3-111196-3
100 2.760 [70.10] 2.695 [68.45] 2.475 [62.87] 2.450 [62.23] 1.221 [31.01] 2.544 [64.62] 2-111196-4
57
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Paddleboard Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board, Ribbon Cable, System 50
Note: All part numbers are RoHS compliant.
Paddleboard
Receptacles
Material and Finish
Housing — Black LCP thermoplastic,
94V-0 rated
Cover — Black polyester, 94V-0 rated
Contacts — Copper alloy, plated
.000100-.000200 [0.00245-0.00508]
bright tin over .000050-.000100
[0.00127-0.00254] nickel
.024
[0.61]
.118
[3.00]
.040
[1.02] .030
[0.76] Standoffs
(Various Locations)
B
.100
[2.54]
A
.020
[0.51]
.045
[1.19]
Ref.
.050
[1.27]
No. of PCB Hole Dimensions Part Numbers
Pos. Layout AB
10 1 .436 [11.07] .200 [5.08] 5111595-1
14 1 .536 [13.61] .300 [7.62] 5111595-2
16 2 .586 [14.88] .350 [8.89] 5111595-3
20 2 .686 [17.42] .450 [11.43] 5111595-4
24 2 .786 [19.96] .550 [13.97] 5111595-5
26 1 .836 [21.23] .600 [15.24] 5111595-6
28 2 .886 [22.50] .650 [16.51] 2-5111595-0
30 1 .936 [23.77] .700 [17.78] 5111595-7
34 1 1.036 [26.31] .800 [20.32] 5111595-8
40 2 1.186 [30.12] .950 [24.13] 5111595-9
T
yp. .050
[1.27] T
yp.
.168
[4.27]
.075
[1.91] Typ.
.304
[7.72]
.008
[0.20]
T
yp.
.340
[8.64]
(Unterminated)
Position 1
Indicator
.273
[6.93]
(Terminated)
.050
[1.27] Typ.
.075
[1.91] Typ.
.304
[7.72]
.031
[0.79] Typ.
Recommended PC Board Layout 2
No. of PCB Hole Dimensions Part Numbers
Pos. Layout AB
44 2 1.286 [32.66] 1.050 [26.67] 1-5111595-0
46 1 1.336 [33.93] 1.100 [27.94] 1-5111595-7
50 1 1.436 [36.47] 1.200 [30.48] 1-5111595-1
60 2 1.686 [42.82] 1.450 [36.83] 1-5111595-2
64 2 1.786 [45.36] 1.550 [39.37] 1-5111595-3
68 2 1.886 [47.90] 1.650 [41.91] 1-5111595-9
72 2 1.986 [50.44] 1.750 [44.45] 1-5111595-4
80 2 2.186 [55.52] 1.950 [49.53] 1-5111595-5
100 2 2.686 [68.22] 2.450 [62.23] 1-5111595-6
B
Related Product Data
Performance Characteristics —
page 63
Application Tooling — pages 60-62
Technical Documents — page 64
Product Specification 108-1109
Application Specification
114-25040
.050
[1.27] Typ.
.075
[1.91] Typ.
.304
[7.72]
.031
[0.79] Typ.
Recommended PC Board Layout 1
B
58
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Flat Ribbon
Cable
No. of Dimensions Part Numbers
Conductors AB Length Per Reel*
100 ft. [30.48 m] 500 ft. [152.4 m]
16 .375 [9.52] .400 [10.16] 5-57013-1 5-57013-2
20.475 [12.07] .500 [12.70] 1-57013-3 57013-1
24 .575 [14.61] .600 [15.24] 1-57013-4 57013-8
26 .625 [15.88] .650 [16.51] 2-57013-5 2-57013-6
28.675 [17.14] .700 [17.78] 4-57013-6 4-57013-7
30.725 [18.42] .750 [19.05] 1-57013-5 57013-6
34 .825 [20.95] .850 [21.59] 4-57013-9 5-57013-0
36 .875 [22.23] .900 [22.86] 1-57013-6 57013-7
40 .975 [24.77] 1.000 [25.40] 1-57013-7 57013-2
44 1.075 [27.31] 1.100 [27.94] 1-57013-8 57013-9
50 1.225 [27.94] 1.250 [31.75] 1-57013-9 1-57013-0
60 1.475 [37.47] 1.500 [38.10] 2-57013-0 57013-3
68 1.675 [42.55] 1.700 [43.18] 2-57013-1 1-57013-1
72 1.775 [45.09] 1.800 [45.72] 2-57013-2 1-57013-2
80 1.975 [50.17] 2.000 [50.80] 2-57013-3 57013-4
100 2.475 [62.87] 2.500 [63.50] 2-57013-4 57013-5
*Reel may contain separate lengths, 20 ft. [6.1 m] min. per length.
30 AWG [0.05 mm2],
Solid Bare Copper
Product Specifications
Voltage —150 Volts
Impedance — 80 Ohms Nominal
(GND,SIG, GND, applies to 30AWG
Solid Bare Copper)
Capacitance — 19.2 pf/ft at
1 MHz nom.
Propagation Delay — 1.51 ns/ft nom.
Crosstalk —
10 ft sample 5 ns rise time:
Near End — 4.0% max.
Far End — 6.0% max.
UL Listing — STYLE 2678
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E53793
Certified by Canadian
Standards Association,
(CSA File No. LL83498)
B
A
.0125
[0.318] .025
[0.635]
T
yp.
30 AWG [0.05 mm2]
Solid Bare Copper
Red Edge Mark
for orientation
.006 [0.152] Minimum
Insulation Thickness
Temperature Rating — -
20°C to +105°C
Insulation—Gray Flame
Retardant Flexible PVC
Flammability—UL: VW1
.025
[0.635]
Base Impedance Capacitance Inductance Nominal NEXT FEXT
Part No. Insulation AWG Voltage Single Ended Nominal Nominal Prop. 10 Ft 10 Ft
G-S-G G-S-G Delay 5ns Rise Time 5ns Rise Time
57013 PVC 30 Solid 150 Vac 80 Ohms Nom 19.2 pf/ft .160 mh/ft 1.51 ns/ft 4.0% Max 6.0% Max
219054, 219137 TPE 30 Solid 150 Vac 90+/- 6 Ohms 15.3 pf/ft .124 mh/ft 1.382 ns/ft 2.39% Nom 2.99% Nom
57119, 57139, 57145 FEP 30 Solid 300 Vac 93 Ohms Nom 13.6 pf/ft .120 mn/ft 1.34 ns/ft 2.6% Nom 2.8% Nom
57131 PVC 30 Stranded 150 VAC 66 Ohms Nom 23.0 pf/ft .100 mh/ft 1.55 ns/ft 2.8% Max 4.5% Max
219055 TPE 30 Stranded 150 VAC 78 Ohms Nom 19.4 pf/ft .118 mh/ft 1.510 ns/fr 1.37% Nom 2.37% Nom
57288, 57289, 57290 FEP 30 Stranded 300 Vac 85 Ohms Nom 15.4 pf/ft .110 mh/ft 1.36 ns/ft 2.5% Nom 2.8% Nom
219253 TPE 31 Stranded 150 Vac 90+/- 6 Ohms 15.4 pf/ft .125 mh/ft 1.527 ns/ft 1.97% Nom 2.51% Nom
57038 PVC 32 Stranded 150 Vac 80 Ohms Nom 19.2 pf/ft .147 mh/ft 1.51 ns/ft 4.0% Max 6.0% Max
219138 TPE 32 Stranded 150 Vac 104 Ohms Nom 12.8 pf/ft .138 mh/ft 1.664 ns/ft 2.10% Nom 2.57% Nom
57118, 57138, 57144 FEP 32 Stranded 300 Vac 105 Ohms Nom 13.0 pf/ft .120 mh/ft 1.36 ns/ft 2.6% Nom 2.8% Nom
Flat Ribbon Cable, PVC Insulation
Electrical Characteristics of .025 [0.64] Centerline IDC Ribbon Cable
R
R
59
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Centerline IDC Ribbon Cable, PVC Insulation
Note: All part numbers are RoHS compliant.
Flat Ribbon
Cable
Part Numbers
No. of Dimensions Length Per Reel
Conductors AB
100 ft. [30.5 m] 500 ft. [152.4 m]
20.475 [12.07] .500 [12.70] 1-57131-3 57131-1
40 .975 [24.77] 1.000 [25.40] 1-57131-7 57131-2
50 1.225 [31.12] 1.250 [31.75] 1-57131-9 1-57131-0
681.675 [42.55] 1.700 [43.18] 2-57131-1 1-57131-1
801.975 [50.17] 2.000 [50.80] 2-57131-3 57131-4
100 2.475 [62.87] 2.500 [63.50] 2-57131-4 57131-5
Edge
Mark
A
30 AWG 7/38
Stranded
Tinned Copper
.0125 [0.318]
.025 TYP
[0.635]
.006 [0.152] Minimum
Insulation Thickness PVC Insulation
.027 [0.686]
B
Product Specifications
Voltage Rating — 150 Volts
Impedance — 66 ohms (GND, SIG,
GND)
Capacitance — 23 pf/ft. at
1 KHz
Propagation Delay —
1.55 ns/ft. [5.6 ns/m]
Crosstalk —
10 Ft. sample 5 ns rise time
Near End — 2.8% max
Near End — 4.5% max
UL AWM Style 2678
Certified
For use with:
AMP-LATCH System 50,
AMPLIMITE .050 Series and
AMPMODU System 50
Connectors
Compatible with:
AMP R-CAM Ribbon Cable
Assembly Machine
30 AWG 7/38 Stranded
Tinned Copper
R
R
60
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Application Tooling for Flexible Film Contacts
Note: All part numbers are RoHS compliant.
Application Tooling
Hand Crimping
Tool Assemblies
(for repair purposes)
The flexible film
semiautomatic bench
machine for terminating
.050 [1.27] and .100 [2.54]
centerline flexible flat
conductor cable (FFC),
flexible etched circuitry
(FEC), and flexible printed
wiring (FPW) with AMP FFC
reel-mounted contacts. For
each cable or circuitry, the
contacts are automatically
applied one-at-a-time in a
straight sequence. To skip
positions, an optional
programmer control box is
available. Crimp height is
easily adjustable in .0002
[.0051] increments.
Termination rates up to
200 contacts per minute.
Flexible Film Termination Machine
(Terminates Continuous Strip Contacts Sequentially)
Specifications
Width — 20.5 [520]
Depth — 27.5 [700]
Height — 18 [460] (with reel support)
Reel Size — 24 [610] (max.)
Weight — 100 lb. [45.4 kg]
Electrical Source —
120 VAC, 50/60 Hz, 7.0 A;
240 VAC, 50/60 Hz, 3.5 A
Technical Documents
Customer Manuals
409-5835 (Part Numbers 224910 and
318619)
409-5880 Programmer Kit (Part
Number 356484-1)
For tooling information, contact the
Technical Support Center:
1-800-522-6752.
Machine Part Numbers
Description Machine
Machine With Programmer*
.100 [2.54] C
L, Multi-Crimp, 120 V 224910-1 318619-1
.100 [2.54] C
L, Multi-Crimp, 240 V 224910-2 318619-2
.100 [2.54] C
L, ARINC, 120 V 224910-3 318619-3
.050 [1.27] C
L, Multi-Crimp, 120 V 224910-4 318619-4
.050 [1.27] C
L, Multi-Crimp, 240 V 224910-6 318619-6
*The Programmer Kit (Part No. 356484-1) may be purchased with a new
machine, or separately for adding onto an existing machine.
Part No. 90273-5—for .100 C
L
Multi-Crimp Contacts (408-9564)
Extraction Tools for .100 C
L
Contacts
Tool No. 91200-■*— for Receptacle
Housings with Side Locking Lance
Slot (408-7916)
Tool No. 91047-■*— for Receptacle
and Pin Housings with End Locking
Lance Slot (408-7384)
*Consult TE for specific dash nos.
61
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Application Tooling for Compliant Pin Connectors
Application Tooling
Note: All part numbers are RoHS compliant.
BMEP MEP AEP 6T AEP 12T
System Type Benchtop Stand-Alone Stand-Alone Stand-Alone or
Semi-Automatic Press Semi-Automatic Press Automatic Press Inline Automatic Press
Force Capability Up to 5 Tons Up to 12 Tons Up to 6 Tons Up to 12 Tons
[44 kN] [107 kN] [53 kN] [107 kN]
Board Size Capability Up to 18" x 24" Up to 30" x 36" Up to 30" x 36" Up to 36" x 48"
[460x610 mm] [760x915 mm] [760x915 mm] [915x1220 mm]
Please contact the Tyco Tooling Assistance Center at 1-800-722-1111 for help with choosing the correct press and tooling to meet your application needs.
See Catalog 1309329 for more information on this equipment.
ASG Servo Electric Presses
for Compliant Pin
Connectors
Every TE ASG servo press
utilizes real-time force and
distance monitoring and
control. This allows the
press to identify an error
and react throughout the
press stroke. Common
problems such as PCB
holes above\below specifi-
cation and sometimes bent
pins can be detected by
monitoring both minimum
and maximum force param-
eters. Common operator
error such as improperly
placed connectors, miss-
ing\incorrect connector or
tooling can also be found
by monitoring premature or
missing force parameters.
In each case, the system
can stop during the press
cycle to avoid costly scrap
and rework.
Product Line Overview
TE offers the ASG line of
servo electric presses for
the application of compliant
pin products. Systems are
available in a wide range of
pressing forces, board size
capabilities and automation
levels to meet almost any
applications requirements.
Each system utilizes a servo
electric motor with PC con-
trol. Coupled with force and
distance monitoring and
control, the entire line pro-
vides 100% quality assur-
ance in real-time with SPC
data collection capabilities.
Automatic set up and a
graphical operator interface
help provide intuitive opera-
tion to help reduce common
and costly operator errors.
Press Force Monitoring for Scrap Avoidance
62
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Application Tooling for Ribbon Cable Connectors
Note: All part numbers are RoHS compliant.
Application Tooling
Manual Arbor Tool
Part No. 91085-2
Pneumatic Auto-Cycle
Tool Part No. 91112-3
These application tools are
designed for one-step
termination of ribbon cable
connectors to planar,
ground plane and
shielded/jacketed ribbon
cable on .025 [0.64]
centers. A complete set of
tooling consists of an Arbor
Tool (manual, Part No.
91085-2 or pneumatic,
Part No. 91112-3), a Base
Assembly, Part No.
768338-4 and a Connector
Specific Kit, Part No.
679167-1 (receptacle).
Technical Documents
Instruction Sheets
408-7777 — Manual Arbor Frame
Assembly
408-6732 — Pneumatic Auto-Cycle
Assembly
408-9827 — Universal Base Assembly,
Arbor Tool
408-9872 — Connector Specific Kit
for Receptacle Connectors (.025 [0.64]
Centerline Cable)
408-9928 — Connector Specific Kit
for Paddleboard Connectors (.025 [0.64]
Centerline Cable)
Note: Tooling is available for other
manufacturers’ manual arbor tools.
For information contact the
TE Technical Support Center:
1-800-522-6752
63
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
3
Performance Specifications
Performance Characteristics
Performance Specifications
Board-to-Board, Board-to-Board, Cable-to-Board,
Description Thru-Hole Surface-Mount, Cable-to-Board, .025 [0.64] Centerline
Headers and Headers and .050 [1.27] Centerline Ribbon Cable
Receptacles Receptacles FFC Cable Receptacles Receptacles
Size Range-Single Row 4 thru 50 — 4 thru 50 —
Double Row 10 thru 100 10 thru 100 8 thru 100 10 thru 100
Current Rating (per contact) 1.0 amperes 1.0 amperes 1.5 amperes 0.5 amperes
Dielectric Withstanding Voltage 500 VAC 500 VAC 300 VAC 200 VAC
Insulation Resistance 5,000 Megohms 5,000 Megohms 5,000 Megohms 5,000 Megohms
Durability (tested to) 200 Cycles 200 Cycles 200 Cycles 150 Cycles
Mating Force (per contact) 5 oz. [1.38 N] Max. 5 oz. [1.38 N] Max. 8 oz. [2.22 N] Max. 4 oz. [1.11 N] Max.
Unmating Force (per contact) 0.8 oz. [0.22 N] Min. 0.8 oz. [0.22 N] Min. 1.0 oz. [0.27 N] Min. *0.5 oz. [0.13 N] Min.
Operating Temperature -65°C to +105°C -65°C to +105°C -55°C to +105°C -65°C to +105°C
*With latches depressed.
Need more information?
Call the Technical Support Center: 1-800-522-6752.
The Technical Support Center is staffed with specialists
well versed in all TE products. The Center can provide
you with:
■ Technical Support
■ Catalogs
■ Technical Documents
■ Product Samples
■ TE Authorized Distributor Locations
Board-to-Board Spacing
for Thru-Hole and
Surface-Mount Connector
Combinations
Thru-Hole Receptacle–
Thru-Hole Header
(Single and Double Row,
Shrouded and Unshrouded)
Thru-Hole Receptacle–
Surface-Mount Header
(Double Row, Shrouded)
Surface-Mount Receptacle–
Thru-Hole Header
(Double Row, Shrouded and
Unshrouded)
Surface-Mount Receptacle–
Surface-Mount Header
(Double Row, Shrouded)
64
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
3
AMPMODU Interconnection System
Technical Documents
Note: All part numbers are RoHS compliant.
Technical Documents
The following is a list of technical documents covering the application, performance and
maintenance of AMPMODU System 50 connectors.
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineer.
108-1093—AMPMODU System 50 Interconnection System, Board-to-Board
108-1109—AMPLATCH System 50 Receptacle and Paddleboard Connector
108-16022—Connector System, .050 [1.27] Centerline FFC Cable
108-16025—Connector, ZIF-Line 50
108-16029—Shielded Flexible Flat Conductor Cable
108-40002—Flexible Flat Conductor Cable
Application Specifications describe requirements for using the product in its intended appli-
cation and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-16008—Multiple Crimp Contact for .050 [1.27] Centerline FFC and FEC Cable
114-16014—AMP ZIF-Line 50 & 100 PCB Connectors
114-25029—AMPMODU System 50 Ribbon Cable Connectors
114-25031—AMPMODU System 50 Thru-Hole Connectors
114-25035—AMPMODU Surface-Mount Connectors
114-25040—AMPMODU System 50 Paddleboard Connectors
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-6732—Pneumatic Arbor Tool, Part Number 91112-3 (Auto-Cycle)
408-7384—Extraction Tool, Part Number 91047
408-7763—Pneumatic Arbor Tool, Part Number 91112-2
408-7777—Manual Arbor Tool, Part Number 91085-2
408-7916—Extraction Tool, Part Number 91200
408-9827—Universal Base Assembly, Arbor Tool, Part Number 768338-1
408-9872—Connector Specific Kit, Part Number 679167-1, AMPMODU System 50
Receptacle Connectors (.025 [0.64] Centerline Cable)
408-9928—Connector Specific Kit, Part Number 679176-1, AMPMODU System 50
Paddleboard Connectors (.025 [0.64] Centerline Cable)
408-9564—Hand Crimping Tool Assembly, Part Number 90273-5
408-9719—FFC Contact Positioning Hand Tool Kit, Part Number 91292-1
65
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
AMPMODU 2mm Connectors (Board to Board)
AMPMODU 2mm Connectors
(Board-to-Board)
AMPMODU 2mm connectors
reliably and economically
meet the packaging and
inter-connection
requirements of today’s
miniature sophisticated
electronics. They are ideal
for mobile and portable
personal computers and disk
drive applications. In today’s
marketplace, 2mm is
expanding over many other
industry segments due to
space constraints.
This versatile double-
row connector system is
comprised of various
straight and right-angle
posted headers for
thru-hole and surface
mounting and several
closed top-entry
receptacle assemblies
for vertical and horizontal
mounting. Headers and
receptacle assemblies are
available in selected sizes
ranging from 4 through
80 positions.
Thru-hole breakaway
headers feature brass
straight or right-angle
posts with a post length of
4.0 [.16] and a lead length
of 2.6 [.10].
The receptacle assemblies
employ phosphor bronze
contacts with dual canti-
lever beams and built-in
anti-overstress. This feature,
coupled with duplex
(gold/tin-lead) plating of
the header posts and
receptacle contacts,
provide superior electrical
performance as well as
excellent solderability.
Product Facts
■2.0 x 2.0 [.08 x .08]
centerline spacing
■Two-piece, double-row
connector system
■Unshrouded header styles
include; breakaway and
surface-mount
■All headers with 0.5 [.02]
square posted contacts
■Surface-mount connectors
compatible with standard
surface-mount processing
(VPR, IR)
■Closed top-entry
receptacle assemblies
include; vertical
mount and right-angle
■Receptacle contacts
employ dual cantilever
beams for two-point
electrical stability
■Duplex (gold/tin-lead)
plated posted contacts
and receptacle contacts
■Thermoplastic housing
material, UL 94V-0 rated
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
■Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
R
R
ISO
Certified
9001
66
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
2mm Headers, Unshrouded, Double Row, Thru-Hole, Vertical Mount
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
0.5 [.02] Square
Straight Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-57197
Packaging Method — Loose piece,
bag Dimensions Part Numbers
Position ABReflow
240°C 265°C
44.0 [.16] 2.0 [.08] 1470213-4 1734508-4
66.0 [.24] 4.0 [.16] 1470213-6 1734508-6
88.0 [.32] 6.0 [.24] 1470213-8 1734508-8
10 10.0 [.39] 8.0 [.32] 1-1470213-0 1-1734508-0
12 12.0 [.47] 10.0 [.39] 1-1470213-2 1-1734508-2
14 14.0 [.55] 12.0 [.47] 1-1470213-4 1-1734508-4
16 16.0 [.63] 14.0 [.55] 1-1470213-6 1-1734508-6
18 18.0 [.71] 16.0 [.63] 1-1470213-8 1-1734508-8
20 20.0 [.79] 18.0 [.71] 2-1470213-0 2-1734508-0
22 22.0 [.87] 20.0 [.79] 2-1470213-2 2-1734508-2
24 24.0 [.94] 22.0 [.87] 2-1470213-4 2-1734508-4
26 26.0 [1.02] 24.0 [.94] 2-1470213-6 2-1734508-6
28 28.0 [1.10] 26.0 [1.02] 2-1470213-8 2-1734508-8
30 30.0 [1.18] 28.0 [1.10] 3-1470213-0 3-1734508-0
32 32.0 [1.26] 30.0 [1.18] 3-1470213-2 3-1734508-2
34 34.0 [1.34] 32.0 [1.26] 3-1470213-4 3-1734508-4
36 36.0 [1.42] 34.0 [1.34] 3-1470213-6 3-1734508-6
38 38.0 [1.50] 36.0 [1.42] 3-1470213-8 3-1734508-8
40 40.0 [1.57] 38.0 [1.50] 4-1470213-0 4-1734508-0
42 42.0 [1.65] 40.0 [1.57] 4-1470213-2 4-1734508-2
44 44.0 [1.73] 42.0 [1.65] 4-1470213-4 4-1734508-4
46 46.0 [1.81] 44.0 [1.73] 4-1470213-6 4-1734508-6
48 48.0 [1.89] 46.0 [1.81] 4-1470213-8 4-1734508-8
50 50.0 [1.97] 48.0 [1.89] 5-1470213-0 5-1734508-0
52 52.0 [2.05] 50.0 [1.97] 5-1470213-2 5-1734508-2
54 54.0 [2.13] 52.0 [2.05] 5-1470213-4 5-1734508-4
56 56.0 [2.20] 54.0 [2.13] 5-1470213-6 5-1734508-6
58 58.0 [2.28] 56.0 [2.20] 5-1470213-8 5-1734508-8
60 60.0 [2.36] 58.0 [2.28] 6-1470213-0 6-1734508-0
62 62.0 [2.44] 60.0 [2.36] 6-1470213-2 6-1734508-2
64 64.0 [2.52] 62.0 [2.44] 6-1470213-4 6-1734508-4
66 66.0 [2.60] 64.0 [2.52] 6-1470213-6 6-1734508-6
68 68.0 [2.68] 66.0 [2.60] 6-1470213-8 6-1734508-8
70 70.0 [2.76] 68.0 [2.68] 7-1470213-0 7-1734508-0
72 72.0 [2.83] 70.0 [2.76] 7-1470213-2 7-1734508-2
74 74.0 [2.91] 72.0 [2.83] 7-1470213-4 7-1734508-4
76 76.0 [2.99] 74.0 [2.91] 7-1470213-6 7-1734508-6
78 78.0 [3.07] 76.0 [2.99] 7-1470213-8 7-1734508-8
80 80.0 [3.15] 78.0 [3.07] 8-1470213-0 8-1734508-0
A±0.50
[±0.02]
B±0.10
[±.004]
0.50±0.02
[.02±.001] DIA TYP
4.00±0.15
[.157±.006]
4.00±0.15
[.157±.006]
2.00±0.15
[.079±.006]
2.00±0.15
[.079±.006]
2.60±0.02
[.102±.001]
1.50±0.15
[.059±.006]
B2.00±0.15
[.079±.006] TYP
2.00
[.079] TYP
0.80
[.031] DIA TYP
Recommended Solder Pad Layout
Note: All part numbers are RoHS
compliant.
67
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
2mm Headers, Unshrouded, Double Row, Thru-Hole, Right-Angle Mount
AMPMODU .025 Square
Interconnection System
0.5 [.02] Square
Straight Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-O Rated, 265°C Process Capable
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-57197
Packaging Method — Loose piece,
bag Position Dimensions Part Numbers
AB
44.0 [0.16] 2.0 [0.08] 1734507-4
66.0 [0.24] 4.0 [0.16] 1734507-6
88.0 [0.31] 6.0 [0.24] 1734507-8
10 10.0 [0.39] 8.0 [0.31] 1-1734507-0
12 12.0 [0.47] 10.0 [0.39] 1-1734507-2
14 14.0 [0.55] 12.0 [0.47] 1-1734507-4
16 16.0 [0.63] 14.0 [0.55] 1-1734507-6
18 18.0 [0.71] 16.0 [0.63] 1-1734507-8
20 20.0 [0.79] 18.0 [0.71] 2-1734507-0
22 22.0 [0.87] 20.0 [0.79] 2-1734507-2
24 24.0 [0.94] 22.0 [0.87] 2-1734507-4
26 26.0 [1.02] 24.0 [0.94] 2-1734507-6
28 28.0 [1.10] 26.0 [1.02] 2-1734507-8
30 30.0 [1.18] 28.0 [1.10] 3-1734507-0
32 32.0 [1.26] 30.0 [1.18] 3-1734507-2
34 34.0 [1.34] 32.0 [1.26] 3-1734507-4
36 36.0 [1.42] 34.0 [1.34] 3-1734507-6
38 38.0 [1.50] 36.0 [1.42] 3-1734507-8
40 40.0 [1.57] 38.0 [1.50] 4-1734507-0
42 42.0 [1.65] 40.0 [1.57] 4-1734507-2
44 44.0 [1.73] 42.0 [1.65] 4-1734507-4
46 46.0 [1.81] 44.0 [1.73] 4-1734507-6
48 48.0 [1.89] 46.0 [1.81] 4-1734507-8
50 50.0 [1.97] 48.0 [1.89] 5-1734507-0
52 52.0 [2.05] 50.0 [1.97] 5-1734507-2
54 54.0 [2.13] 52.0 [2.05] 5-1734507-4
56 56.0 [2.20] 54.0 [2.13] 5-1734507-6
58 58.0 [2.28] 56.0 [2.20] 5-1734507-8
60 60.0 [2.36] 58.0 [2.28] 6-1734507-0
62 62.0 [2.44] 60.0 [2.36] 6-1734507-2
64 64.0 [2.52] 62.0 [2.44] 6-1734507-4
66 66.0 [2.60] 64.0 [2.52] 6-1734507-6
68 68.0 [2.68] 66.0 [2.60] 6-1734507-8
70 70.0 [2.76] 68.0 [2.68] 7-1734507-0
72 72.0 [2.83] 70.0 [2.76] 7-1734507-2
74 74.0 [2.91] 72.0 [2.83] 7-1734507-4
76 76.0 [2.99] 74.0 [2.91] 7-1734507-6
78 78.0 [3.07] 76.0 [2.99] 7-1734507-8
80 80.0 [3.15] 78.0 [3.07] 8-1734507-0
A±0.50
[±0.02]
B±0.10
[±.004]
4.00±0.15
[.157±.006]
0.50±0.02
[.02±.001] DIA TYP
4.00±0.20
[.157±.008]
2.00±0.15
[.079±.006]
TYP
2.00
[.079]
TYP
2.00±0.15
[.079±.006]
2.00±0.15
[.079±.006]
2.00±0.20
[.079±.008]
B
0.80
[.031] DIA TYP
1.50±0.15
[.059±.006]
1.75±0.15
[.069±.006]
2.60±0.02
[.102±.001]
Recommended Solder Pad Layout
Note: All part numbers are RoHS
compliant.
68
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Right-Angle Mount
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
0.5 [.02] Square
Right-Angle Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Posted Contacts — Brass, duplex
plated as follows:
A — 0.00020 [.000008] min. gold on
contact area, 0.00100 [.000039] min.
tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel
B — 0.00076 [.000030] min. gold on
contact area, 0.00100 [.000039] min.
tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-5296
Packaging Method — Loose piece,
bag
AMP/2247
AMPMODU 2mm
Illustration B
MPD • 6/10/94
0.5
[.02]DIA TYP
0.5
[.02]TYP
L
Tin-Lead
Plated
Area
2.0±0.08*
[.08±.003]
Typ.
Recommended PC Board Hole Layout
* Hole centerline to be 2.0±0.08 [.08±.003]; tolerances
not to accumulate within one connector pattern.
TYP TYP
TYP
TYP
DIA TYP
DIA TYP
DIA TYP
No. Dimensions Contact Plating
of Lead Length L = 2.6[.10]**
Positions AB AB
44.0 [0.16] 2.0 [0.08] 5176837-1 2-5176837-5
66.0 [0.24] 4.0 [0.16] 5176837-2 2-5176837-6
88.0 [0.31] 6.0 [0.24] 5176837-3 —
10 10.0 [0.39] 8.0 [0.31] 5176837-4 —
12 12.0 [0.47] 10.0 [0.39] 5176837-5 —
14 14.0 [0.55] 12.0 [0.47] 5176837-6 3-5176837-0
16 16.0 [0.63] 14.0 [0.55] 5176837-7 —
18 18.0 [0.71] 16.0 [0.63] — 3-5176837-2
20 20.0 [0.79] 18.0 [0.71] — 3-5176837-3
22 22.0 [0.87] 20.0 [0.79] — 3-5176837-4
26 26.0 [1.02] 24.0 [0.94] 1-5176837-2 —
30 30.0 [1.18] 28.0 [1.10] 1-5176837-4 —
32 32.0 [1.26] 30.0 [1.18] 1-5176837-5 3-5176837-9
34 34.0 [1.34] 32.0 [1.26] — 4-5176837-0
36 36.0 [1.42] 34.0 [1.34] — 4-5176837-1
38 38.0 [1.50] 36.0 [1.42] 1-5176837-8 4-5176837-2
40 40.0 [1.57] 38.0 [1.50] 1-5176837-9 5-5176837-2
42 42.0 [1.65] 40.0 [1.57] 2-5176837-0 4-5176837-4
44 44.0 [1.73] 42.0 [1.65] 2-5176837-1 —
46 46.0 [1.81] 44.0 [1.73] 2-5176837-2 4-5176837-6
48 48.0 [1.89] 46.0 [1.81] 2-5176837-3 4-5176837-7
50 50.0 [1.97] 48.0 [1.89] 2-5176837-4 4-5176837-8
69
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Vertical Mount
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
0.5 [.02] Square
Straight Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Posted Contacts — Brass, duplex
plated as follows:
Plating A — 0.00020 [.000008] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel
Plating B — 0.00076 [.000030] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-5296
Packaging Method — Loose piece,
bag
AMP/2247
AMPMODU 2mm
Illustration A
MPD • 6/10/94
Dia. Typ.
L
Tin Plated
Area
2.0 ± 0.08*
[.08 ± .003]
Typ.
0.5
[.02] Typ.
0.5
[.02]
Recommended PC Board Hole Layout
* Hole centerline to be 2.0±0.08 [.08±.003]; tolerances
not to accumulate within one connector pattern.
4.0
[.16]
Dia. Typ.
70
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
Note: All part numbers are RoHS compliant.
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Vertical Mount (Continued)
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
0.5 [.02] Square
Straight Posts
No. Dimensions Contact Plating
of
AB
Lead Length L = 1.5 [.06] Lead Length L = 2.6 [.10]
Positions Plating A Plating B Plating A Plating B
44.0 [0.16] 2.0 [0.08] 5178751-1 2-5178751-5 5176264-1 1-5176264-6
66.0 [0.24] 4.0 [0.16] — 2-5178751-6 5176264-2 1-5176264-7
88.0 [0.31] 6.0 [0.24] — 2-5178751-7 5176264-3 1-5176264-8
10 10.0 [0.39] 8.0 [0.31] 5178751-4 2-5178751-8 5176264-4 1-5176264-9
1212.0 [0.47] 10.0 [0.39] — 2-5178751-9 5176264-5 2-5176264-0
1414.0 [0.55] 12.0 [0.47] 5178751-6 3-5178751-0 5176264-6 2-5176264-1
16 16.0 [0.63] 14.0 [0.55] — 3-5178751-1 5176264-7 2-5176264-2
18 18.0 [0.71] 16.0 [0.63] 5178751-8 3-5178751-2 5176264-8 2-5176264-3
2020.0 [0.79] 18.0 [0.71] 5178751-9 3-5178751-3 5176264-9 2-5176264-4
2222.0 [0.87] 20.0 [0.79] 1-5178751-0 3-5178751-4 1-5176264-0 2-5176264-5
2424.0 [0.94] 22.0 [0.87] 1-5178751-1 3-5178751-5 1-5176264-1 2-5176264-6
26 26.0 [1.02] 24.0 [0.94] 1-5178751-2 3-5178751-6 — —
28 28.0 [1.10] 26.0 [1.02] — 3-5178751-7 1-5176264-3 —
3030.0 [1.18] 28.0 [1.10] 1-5178751-4 3-5178751-8 1-5176264-4 2-5176264-9
32 32.0 [1.26] 30.0 [1.18] 1-5178751-5 3-5178751-9 1-5176264-5 —
34 34.0 [1.34] 32.0 [1.26] 1-5178751-6 4-5178751-0 — 4-5176264-0
36 36.0 [1.42] 34.0 [1.34] 1-5178751-7 4-5178751-1 3-5176264-2 4-5176264-1
38 38.0 [1.50] 36.0 [1.42] 1-5178751-8 4-5178751-2 3-5176264-3 —
40 40.0 [1.57] 38.0 [1.50] 1-5178751-9 4-5178751-3 3-5176264-4 —
42 42.0 [1.65] 40.0 [1.57] 2-5178751-0 4-5178751-4 ——
44 44.0 [1.73] 42.0 [1.65] 2-5178751-1 4-5178751-5 3-5176264-6 4-5176264-5
46 46.0 [1.81] 44.0 [1.73] 2-5178751-2 4-5178751-6 — 4-5176264-6
48 48.0 [1.89] 46.0 [1.81] 2-5178751-3 4-5178751-7 — 4-5176264-7
50 50.0 [1.97] 48.0 [1.89] 2-5178751-4 4-5178751-8 3-5176264-9 4-5176264-8
71
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
Header Assembly, AMPMODU
2mm SMT Vertical
2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,
Vertical Mount
Note: All part numbers are RoHS compliant.
0.5 [.02] Square Straight
Posts
Material and Finish
Housing — Black polyphenylene
sulfide, UL 94V-0 rated
Posted Contacts — Phosphor bronze,
plated as follows, Duplex plated 0.00020
[.000008] min. gold on contact area,
0.00200 [.000079] min. tin on solder
area, with entire contact underplated
0.00130 [.000051] min. nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-51001
Packaging Method — Tape & Reel
No. of Dimensions Part
Positions ABC
Numbers
44.0 [0.16] 2.0 [0.08] 4.0 [0.16] 5084476-1
66.0 [0.24] 4.0 [0.16] 6.0 [0.24] 5084476-2
12 12.0 [0.47] 10.0 [0.39] 5.0 [0.20] 5084476-7
16 16.0 [0.63] 14.0 [0.55] 8.0 [0.31] 5084476-3
A0.50±0.03
[.02±.002] TYP
B
1.00 [.04]
0.00
1.00 [.04]
4.20
[.17]
±0.05
[.003]
-0.00
2.00
[.08] TYP
0.50±0.02
[.02±.001] TYP
0.50±0.02
[.02±.001] TYP
1.40 MAX
[.06] TYP
C
4.20±0.05
[.17±.003]
0.50±0.02
[.02±.001]
TYP
D±0.25
[.01]
RO.50
REF
Tin-Lead
Plating Area
Vacuum Cap
1.50 [.06]
1.00 [.04]
2.00
[.08]
7.00±0.02
[.28±.001]
1.00±0.08
[.04±.003] TYP
1.50
[.06] TYP
2.60
[.10]
TYP
2.00
[.08] TYP
Recommended Solder Pad Layout
0.10
[.004]
B±0.08 [.003]
Tolerances Non-Cumulative
72
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
4
METRIC
Dimensions are
millimeters over inches
2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,
Vertical Mount (Continued)
Note: All part numbers are RoHS compliant.
AMPMODU .025 Square
Interconnection System
0.5 [.02] Square Straight
Posts
Material and Finish
Housing — Black polyphenylene
sulfide, UL 94V-0 rated
Posted Contacts — Phosphor bronze,
plated as follows, Duplex plated 0.0076
[.000030] min. gold on contact area,
0.00254-0.00406 [.000100-.000160]
min. tin on solder area, with entire
contact underplated 0.00127 [.000050]
min. nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-18544
Packaging Method — Tape & Reel
No. of Dimensions Part
Positions ABC
Numbers
44.0 [0.16] 2.0 [0.08] 7.60 [0.30] 966926-2
66.0 [0.24] 4.0 [0.16] 9.60 [0.38] 966926-3
88.0 [0.31] 6.0 [0.24] 11.60 [0.46] 966926-4
10 10.0 [0.39] 8.0 [0.31] 13.60 [0.53] 966926-5
12 12.0 [0.47] 10.0 [0.39] 15.60 [0.61] 966926-6
14 14.0 [0.55] 12.0 [0.47] 17.60 [0.69] 966926-7
16 16.0 [0.63] 14.0 [0.55] 19.60 [0.77] 966926-8
18 18.0 [0.71] 16.0 [0.63] 21.60 [0.85] 966926-9
20 20.0 [0.79] 18.0 [0.71] 23.60 [0.93] 1-966926-0
22 22.0 [0.87] 20.0 [0.79] 25.60 [1.01] 1-966926-1
24 24.0 [0.94] 22.0 [0.87] 27.60 [1.09] 1-966926-2
A
6.5±0.25
[.256±.010]
B
3.8
[.150]
2.00
[.079] TYP
3.45
[.136]
0.9
[.035]
4.5
[.177]
0.50
[.02]
TYP
1.00±0.08
[.04±.003] TYP
0.50
[.020] TYP
3.75
[.148]
TYP
2.00
[.08] TYP
Recommended Solder Pad Layout
B±0.08 [.003]
T
olerances Non-Cumulative
C
AMPMODU Interconnection System
73
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
2mm Stacking Header, Unshrouded, Double Row, Thru-Hole,
Vertical Mount
Note: All part numbers are RoHS compliant.
2.0 Pitch Vertical
0.5 [.02] Square Straight
Posts
12 Position
Part Number 1734770-1
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
Gold flash all over contact underplated
0.00127 [.000050] min. nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-57331
Packaging Method — Loose piece,
bag
12.0
[.047]
10.0
[.039]
10.0
[.394]
9.75
[.384]
0.5±0.03
[0.02±.001]
0.8±0.05
[0.31±.002] DIA
12 Places
2.0
[.079] TYP
2.0
[.079] TYP
2.0
[.079]
2.0
[.079]
TYP
2.0
[.079]
4.0
[.157]
2.54
[.100]
2.54
[.100]
74
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
Note: All part numbers are RoHS compliant.
2.0 Pitch Right-Angle
0.5 [.02] Square Right-Angle
Posts
26 Position
Part Number 5084780-1
Material and Finish
Housing — High temperature, black
thermoplastic, UL 94 V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00038 [.000015] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80 and 84
Product Specification
108-5296
Packaging Method — Tube
4.10
[.161]
6.30
[.248]
2.00
[.079]
2.00
[.079]
0.75
[.03]
2.54
[.100]
2.00
[.079]
2.325
[.092] 2 Places 2.00 24.00
12 Spaces x [.079] = [.945]
1.40
[.055]
+0.01
-0.05
+.000
-.002
4.80 +0.01/-0.22
[.189 +.004/-.009]
2.99
[.118]
+0.51
-0.25
+.02
-.01
Soldertail
27.15
[1.069]
+0.10
-0.05
+.004
-.002
6.65
[.262]
3.60
[.142]
28.65
[1.128]
0.50±0.03
[0.02±.001]
0.50±0.03
[0.02±.001]
6.40±0.20
[.252±.008]
2.00±0.05
[.079±.002] TYP
0.50 TYP at
[.079] Post Tips
0.50 TYP at
[.079] Post Tips
TYP at
Post Tips
2.00±0.05
[.079±.002] TYP
0.90±0.05
[.035±.002] TYP
3.60
[.142] TYP
Tolerance
Non-Cumulative
0.75
[.03] Ref.
0.50
[.02] Ref.
Recommended PCB Layout
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
75
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
Note: All part numbers are RoHS compliant.
2.0 Pitch Right-Angle
0.5 [.02] Square Right-Angle
Posts
Material and Finish
Housing — Natural color thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, plated as
follows:
0.00020 [.000008] min. gold on contact
area, with 0.00254 [.00010] tin on
soldertails, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80 and 84
Product Specification
108-57197
Packaging Method — Tubes
No. of Dimensions Part Numbers
Positions ABC
86.0 [0.24] 8.85 [0.35] 9.95 [0.39] 1734493-8
10 8.0 [0.31] 10.85 [0.43] 11.95 [0.47] 1-1734493-0
12 10.0 [0.39] 12.85 [0.51] 13.95 [0.55] 1-1734493-2
14 12.0 [0.47] 14.85 [0.58] 15.95 [0.63] 1-1734493-4
16 14.0 [0.55] 16.85 [0.66] 17.95 [0.71] 1-1734493-6
18 16.0 [0.63] 18.85 [0.74] 19.95 [0.79] 1-1734493-8
20 18.0 [0.71] 20.85 [0.82] 21.95 [0.86] 2-1734493-0
22 20.0 [0.79] 22.85 [0.90] 23.95 [0.94] 2-1734493-2
24 22.0 [0.87] 24.85 [0.98] 25.95 [1.02] 2-1734493-4
26 24.0 [0.94] 26.85 [1.06] 27.95 [1.10] 2-1734493-6
28 26.0 [1.02] 28.85 [1.14] 29.95 [1.18] 2-1734493-8
30 28.0 [1.10] 30.85 [1.21] 31.95 [1.26] 3-1734493-0
32 30.0 [1.18] 32.85 [1.29] 33.95 [1.34] 3-1734493-2
34 32.0 [1.26] 34.85 [1.37] 35.95 [1.42] 3-1734493-4
36 34.0 [1.34] 36.85 [1.45] 37.95 [1.49] 3-1734493-6
38 36.0 [1.42] 38.85 [1.53] 39.95 [1.57] 3-1734493-8
40 38.0 [1.50] 40.85 [1.61] 41.95 [1.65] 4-1734493-0
42 40.0 [1.57] 42.85 [1.69] 43.95 [1.73] 4-1734493-2
44 42.0 [1.65] 44.85 [1.77] 45.95 [1.81] 4-1734493-4
46 44.0 [1.73] 46.85 [1.84] 47.95 [1.89] 4-1734493-6
48 46.0 [1.81] 48.85 [1.92] 49.95 [1.97] 4-1734493-8
50 48.0 [1.89] 50.85 [2.00] 51.95 [2.05] 5-1734493-0
52 50.0 [1.97] 52.85 [2.08] 53.95 [2.12] 5-1734493-2
54 52.0 [2.05] 54.85 [2.16] 55.95 [2.20] 5-1734493-4
56 54.0 [2.13] 56.85 [2.34] 57.95 [2.28] 5-1734493-6
58 56.0 [2.20] 58.85 [2.32] 59.95 [2.36] 5-1734493-8
60 58.0 [2.28] 60.85 [2.40] 61.95 [2.44] 6-1734493-0
62 60.0 [2.36] 62.85 [2.47] 63.95 [2.52] 6-1734493-2
64 62.0 [2.44] 64.85 [2.55] 65.95 [2.60] 6-1734493-4
A ± 0.10
[± .004]
B ± 0.20
[± .008]
C ± 0.20
[± .008]
2.00 ± 0.05
[.079 ± .002]
2.00
[.079]
A
4.50 ± 0.15
[.177 ± .006]
3.00 ± 0.20
[.118 ± .008]
5.50 ± 0.15
[.217 ± .006]
0.50 ± 0.02
[.020 ± .001]
Ø 0.80
[.031]
Recommended PCB Layout
2.00 ± 0.10
[.079 ± .004]
5.60 ± 0.15
[.220 ± .006]
3.60 ± 0.20
[.142 ± .008]
6.65 ± 0.20
[.262 ± .008]
2.00 ± 0.10
[.079 ± .004]
2.40
[.094]
Sq.
Typ.
2.00
[.079] Typ.
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
(Continued)
76
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
Note: All part numbers are RoHS compliant.
0.5 [.02] Square Posts
Material and Finish
Housing — Black color, PA9T (Nylon
9T), UL 94 V-O Rated
Posted Contacts — Brass, plated as
follows:
0.00076 [.000003] min. gold on contact
area, with 0.00254 [.00010] matte tin on
soldertails, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80, 81, and 84
No. of Dimensions Part Numbers
Positions ABC
86.0 [0.24] 8.85 [0.35] 9.95 [0.39] 2041068-8
10 8.0 [0.31] 10.85 [0.43] 11.95 [0.47] 1-2041068-0
12 10.0 [0.39] 12.85 [0.51] 13.95 [0.55] 1-2041068-2
14 12.0 [0.47] 14.85 [0.58] 15.95 [0.63] 1-2041068-4
16 14.0 [0.55] 16.85 [0.66] 17.95 [0.71] 1-2041068-6
18 16.0 [0.63] 18.85 [0.74] 19.95 [0.79] 1-2041068-8
20 18.0 [0.71] 20.85 [0.82] 21.95 [0.86] 2-2041068-0
22 20.0 [0.79] 22.85 [0.90] 23.95 [0.94] 2-2041068-2
24 22.0 [0.87] 24.85 [0.98] 25.95 [1.02] 2-2041068-4
26 24.0 [0.94] 26.85 [1.06] 27.95 [1.10] 2-2041068-6
28 26.0 [1.02] 28.85 [1.14] 29.95 [1.18] 2-2041068-8
30 28.0 [1.10] 30.85 [1.21] 31.95 [1.26] 3-2041068-0
32 30.0 [1.18] 32.85 [1.29] 33.95 [1.34] 3-2041068-2
34 32.0 [1.26] 34.85 [1.37] 35.95 [1.42] 3-2041068-4
36 34.0 [1.34] 36.85 [1.45] 37.95 [1.49] 3-2041068-6
38 36.0 [1.42] 38.85 [1.53] 39.95 [1.57] 3-2041068-8
40 38.0 [1.50] 40.85 [1.61] 41.95 [1.65] 4-2041068-0
42 40.0 [1.57] 42.85 [1.69] 43.95 [1.73] 4-2041068-2
44 42.0 [1.65] 44.85 [1.77] 45.95 [1.81] 4-2041068-4
46 44.0 [1.73] 46.85 [1.84] 47.95 [1.89] 4-2041068-6
48 46.0 [1.81] 48.85 [1.92] 49.95 [1.97] 4-2041068-8
50 48.0 [1.89] 50.85 [2.00] 51.95 [2.05] 5-2041068-0
5.20
[.205] Ref.
2.40
[.094]
C
22.00
[.866]
4.50
[.177]
5.50
[.217]
6.50
[.256]
1.20
[.047]
8.00
[.315] Ref.
1.30
[.051] Typ.
2.00
[..079] Pitch
7.50
[1.38]
2.00 ± 0.05
[.079 ± .001]
3.60 ± 0.15
[.142 ± .005]
2.00 ± 0.10
[.079 ± .004]
B
A
Pitch
.0.50
[.020]
5.60 ± 0.15
[.220 ± .006]
Ref. Cap
2.60 ± 0.15
[.102 ± .005]6.70 ± 0.25
[.264 ± .010]
1.00
[25.4]
2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount
Recommended PCB Layout
2.0 Pitch Vertical
77
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
Note: All part numbers are RoHS compliant.
Receptacle Assemblies,
Double Row, Vertical Mount with
Vacuum Adapter Cap
0.5 [.02] Square Straight
Posts
Material and Finish
Housing — Black high temperature
thermoplastic, UL 94 V-O Rated
Posted Contacts — Phosphor Bronze,
duplex plated as follows:
0.00076[0.000030] min. gold on contact
area, 0.00381[.000150] min. tin on
solder area, with entire contact
underplated 0.00127[.000050] min.
nickel
Product Specification
108-57328
Packaging Method — Tape and reel
No. of Dimensions Part Numbers
Positions ABCD
20 26.2 [1.03] 20.0 [0.79] 24.3 [0.96] 16.0 [.63] 2-1734569-0
30 36.2 [1.43] 30.0 [1.18] 34.3 [1.35] 26.0 [1.02] 3-1734569-0
Recommended PCB Layout
4.0
[.157]
3.6
[.142]
2.00
[.079]
2.00
[.079] 6.2
[.244]
1.91±0.05
[0.75±.002]
1.91±0.05
[0.75±.002] 2 Plc.
3.02
[.119]
4.50
[.177]
6.35
[.250]
7.04
[.277]
Vacuum Adapter Cap
D
D
A
B
C
2.00
[.079] TYP
2.00
[.079] TYP
0.51
[.020] TYP
1.2
[.047] TYP
1.14
[.045] TYP
1.20
[.047] 2 Plc.
1.09
[.043] 2 Plc. 1.4
[.055] 2 Plc.
7.56
[.298] TYP
2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount
(Continued)
78
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
2mm Headers, Shrouded, Double Row, Thru-Hole, Vertical Mount
Note: All part numbers are RoHS compliant.
Box Header
0.5 [.02] Square Straight
Posts with Cable Shroud
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, duplex
plated as follows:
0.00254 [.000100] min. tin on contact
area, with entire contact underplated
0.00127 [.000050] min. nickel
Related Product Data
Mateable Receptacles —
See Drawings 1470106 Contacts and
1470107 Housing
Product Specification
108-57217
Packaging Method — Loose piece,
bag
No. of Dimensions Part Numbers
Position ABC
64.0 [0.16] 8.0 [0.31] 6.74 [0.26] 1470109-6
86.0 [0.24] 10.0 [0.39] 8.74 [0.34] 1470109-8
10 8.0 [0.31] 12.0 [0.47] 10.74 [0.42] 1-1470109-0
12 10.0 [0.39] 14.0 [0.55] 12.74 [0.50] 1-1470109-2
14 12.0 [0.47] 16.0 [0.63] 14.74 [0.58] 1-1470109-4
16 14.0 [0.55] 18.0 [0.71] 16.74 [0.66] 1-1470109-6
18 16.0 [0.63] 20.0 [0.79] 18.74 [0.74] 1-1470109-8
20 18.0 [0.71] 22.0 [0.87] 20.74 [0.82] 2-1470109-0
22 20.0 [0.79] 24.0 [0.94] 22.74 [0.89] 2-1470109-2
24 22.0 [0.87] 26.0 [1.02] 24.74 [0.97] 2-1470109-4
26 24.0 [0.94] 28.0 [1.10] 26.74 [1.05] 2-1470109-6
28 26.0 [1.02] 30.0 [1.18] 28.74 [1.13] 2-1470109-8
30 28.0 [1.10] 32.0 [1.26] 30.74 [1.21] 3-1470109-0
32 30.0 [1.18] 34.0 [1.34] 32.74 [1.29] 3-1470109-2
Recommended PCB Layout
2.00
[.08] TYP
0.7±0.1
[.028±.004]
A
3.0±0.2
[.118±.008]
0.5±0.05
[.02±.002]
5.00
[1.97]
1.15
[.045]
2.0
[.079]
TYP
4.3
[.169]
6.5
[.256]
1.35
[.053] TYP
2.0
[.079] TYP
0.8
[.031]
3.5
[.138]
0.95
[.037] TYP
1.60
[0.63] TYP
B±0.3
[±.012]
A±0.25
[±.010]
C +0.2/-0.05
[+.008/-.002]
79
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
Note: All part numbers are RoHS compliant.
Pitch Right-Angle Mount
0.5 [.02] Square Right-Angle
Posts with Cable Shroud
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, duplex
plated as follows:
0.00254 [.000100] min. tin on contact
area, with entire contact underplated
0.00127 [.000050] min. nickel
Related Product Data
Mateable Receptacles —
See Drawings 1470106 Contacts and
1470107 Housing
Product Specification
108-57217
Packaging Method — Loose piece,
bag
No. of Dimensions Part Numbers
Position ABC
64.0 [0.16] 8.00 [0.31] 6.74 [0.26] 1470108-6
86.0 [0.24] 10.00 [0.39] 8.74 [0.34] 1470108-8
10 8.0 [0.32] 12.00 [0.47] 10.74 [0.42] 1-1470108-0
12 10.0 [0.39] 14.00 [0.55] 12.74 [0.50] 1-1470108-2
14 12.0 [0.47] 16.00 [0.63] 14.74 [0.58] 1-1470108-4
16 18.0 [0.71] 18.00 [0.71] 16.74 [0.66] 1-1470108-6
18 14.0 [0.55] 20.00 [0.79] 18.74 [0.74] 1-1470108-8
20 16.0 [0.63] 22.00 [0.87] 20.74 [0.82] 2-1470108-0
22 22.0 [0.87] 24.00 [0.94] 22.74 [0.89] 2-1470108-2
24 20.0 [0.79] 26.00 [1.02] 24.74 [0.97] 2-1470108-4
26 24.0 [0.94] 28.00 [1.10] 26.74 [1.05] 2-1470108-6
28 28.0 [1.10] 30.00 [1.18] 28.74 [1.13] 2-1470108-8
30 26.0 [1.02] 32.00 [1.26] 30.74 [1.21] 3-1470108-0
32 30.0 [1.18] 34.00 [1.34] 32.74 [1.29] 3-1470108-2
Recommended PCB Layout
2.00
[.08] TYP
0.7±0.1
[.028±.004]
3.0±0.2
[.118±.008]
0.5±0.05
[.02±.002]
2.0±0.1
[.079±.004]
5.00
[1.97]
7.00
[.276]
7.00
[.276]
1.15
[.045]
.079
[2.0]
4.3
[.169]
9.5
[.374]
1.35
[.053] TYP
2.0
[.079] TYP
0.8
[.031]
3.5
[.138]
0.95
[.037] TYP
1.60
[0.63] TYP
B±0.3
[±.012]
A±0.25
[±.010]
C +0.2/-0.05
[+.008/-.002]
80
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
4
METRIC
Dimensions are
millimeters over inches
2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount
Note: All part numbers are RoHS compliant.
2.0 Mount Type
w/PickUp
Part Numbers
No. of Dimensions Plating A Plating B
Positions AB
Dim. L Dim. L Dim. L Dim. L
1.2+/-0.1 2.6+/-0.1 1.2+/-0.1 2.6+/-0.1
(.047+/-.004) (.102+/-.004) (.047+/-.004) (.102+/-.004)
44.0 [.157] 2.0 [.079] 1470209-1 2-1470209-5 5-1470209-1 7-1470209-5
66.0 [.236] 4.0 [.157] 1470209-2 2-1470209-6 5-1470209-2 7-1470209-6
88.0 [.315] 6.0 [.236] 1470209-3 2-1470209-7 5-1470209-3 7-1470209-7
10 10.0 [.394] 8.0 [.315] 1470209-4 2-1470209-8 5-1470209-4 7-1470209-8
12 12.0 [.472] 10.0 [.394] 1470209-5 2-1470209-9 5-1470209-5 7-1470209-9
14 14.0 [.551] 12.0 [.472] 1470209-6 3-1470209-0 5-1470209-6 8-1470209-0
16 16.0 [.630] 14.0 [.551] 1470209-7 3-1470209-1 5-1470209-7 8-1470209-1
18 18.0 [.709] 16.0 [.630] 1470209-8 3-1470209-2 5-1470209-8 8-1470209-2
20 20.0 [.787] 18.0 [.709] 1470209-9 3-1470209-3 5-1470209-9 8-1470209-3
22 22.0 [.866] 20.0 [.787] 1-1470209-0 3-1470209-4 6-1470209-0 8-1470209-4
24 24.0 [.945] 22.0 [.866] 1-1470209-1 3-1470209-5 6-1470209-1 8-1470209-5
26 26.0 [1.024] 24.0 [.945] 1-1470209-2 3-1470209-6 6-1470209-2 8-1470209-6
28 28.0 [1.102] 26.0 [1.024] 1-1470209-3 3-1470209-7 6-1470209-3 8-1470209-7
30 30.0 [1.181] 28.0 [1.102] 1-1470209-4 3-1470209-8 6-1470209-4 8-1470209-8
32 32.0 [1.260] 30.0 [1.181] 1-1470209-5 3-1470209-9 6-1470209-5 8-1470209-9
34 34.0 [1.339] 32.0 [1.260] 1-1470209-6 4-1470209-0 6-1470209-6 9-1470209-0
36 36.0 [1.417] 34.0 [1.339] 1-1470209-7 4-1470209-1 6-1470209-7 9-1470209-1
38 38.0 [1.496] 36.0 [1.417] 1-1470209-8 4-1470209-2 6-1470209-8 9-1470209-2
40 40.0 [1.575] 38.0 [1.496] 1-1470209-9 4-1470209-3 6-1470209-9 9-1470209-3
42 42.0 [1.654] 40.0 [1.575] 2-1470209-0 4-1470209-4 7-1470209-0 9-1470209-4
44 44.0 [1.732] 42.0 [1.654] 2-1470209-1 4-1470209-5 7-1470209-1 9-1470209-5
46 46.0 [1.811] 44.0 [1.732] 2-1470209-2 4-1470209-6 7-1470209-2 9-1470209-6
48 48.0 [1.890] 46.0 [1.811] 2-1470209-3 4-1470209-7 7-1470209-3 9-1470209-7
50 50.0 [1.969] 48.0 [1.890] 2-1470209-4 4-1470209-8 7-1470209-4 9-1470209-8
Receptacle, Thru-Hole,
Vertical
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated, 245°C Reflow
Contacts — Copper alloy, plated as
follows:
A— 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B— 0.00076 [.000030] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Headers —
pages 66-76, 78, 79
Product Specification
108-57197
Packaging Method — Tray
0.5
[.02]
0.5
[.02]
2.0±0.05
[.079±.002] TYP
2.0±0.1
[.079±.004] TYP
0.75±0.05
[.030±.002] TYP
0.20
[.008] TYP
1.67
[.066] Ref.
2.0±0.05
[.079±.002]
TYP
2.0±0.1
[.079±.004] 4.00
[.157]
4.50
[.177]
0.36
[.014]
B±0.2
[±.008]
L±0.1
[±.004]
A±0.25
[±.01]
Recommended PCB Layout
AMPMODU Interconnection System
81
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount (Continued)
2.0 Mount Type
w/PickUp
Note: All part numbers are RoHS compliant.
Part Numbers
No. of Dimensions Plating A Plating B
Positions AB
Dim. L Dim. L Dim. L Dim. L
1.2+/-0.1 2.6+/-0.1 1.2+/-0.1 2.6+/-0.1
(.047+/-.004) (.102+/-.004) (.047+/-.004) (.102+/-.004)
44.0 [.157] 2.0 [.079] 1734506-1 2-1734506-5 5-1734506-1 7-1734506-5
66.0 [.236] 4.0 [.157] 1734506-2 2-1734506-6 5-1734506-2 7-1734506-6
88.0 [.315] 6.0 [.236] 1734506-3 2-1734506-7 5-1734506-3 7-1734506-7
10 10.0 [.394] 8.0 [.315] 1734506-4 2-1734506-8 5-1734506-4 7-1734506-8
12 12.0 [.472] 10.0 [.394] 1734506-5 2-1734506-9 5-1734506-5 7-1734506-9
14 14.0 [.551] 12.0 [.472] 1734506-6 3-1734506-0 5-1734506-6 8-1734506-0
16 16.0 [.630] 14.0 [.551] 1734506-7 3-1734506-1 5-1734506-7 8-1734506-1
18 18.0 [.709] 16.0 [.630] 1734506-8 3-1734506-2 5-1734506-8 8-1734506-2
20 20.0 [.787] 18.0 [.709] 1734506-9 3-1734506-3 5-1734506-9 8-1734506-3
22 22.0 [.866] 20.0 [.787] 1-1734506-0 3-1734506-4 6-1734506-0 8-1734506-4
24 24.0 [.945] 22.0 [.866] 1-1734506-1 3-1734506-5 6-1734506-1 8-1734506-5
26 26.0 [1.024] 24.0 [.945] 1-1734506-2 3-1734506-6 6-1734506-2 8-1734506-6
28 28.0 [1.102] 26.0 [1.024] 1-1734506-3 3-1734506-7 6-1734506-3 8-1734506-7
30 30.0 [1.181] 28.0 [1.102] 1-1734506-4 3-1734506-8 6-1734506-4 8-1734506-8
32 32.0 [1.260] 30.0 [1.181] 1-1734506-5 3-1734506-9 6-1734506-5 8-1734506-9
34 34.0 [1.339] 32.0 [1.260] 1-1734506-6 4-1734506-0 6-1734506-6 9-1734506-0
36 36.0 [1.417] 34.0 [1.339] 1-1734506-7 4-1734506-1 6-1734506-7 9-1734506-1
38 38.0 [1.496] 36.0 [1.417] 1-1734506-8 4-1734506-2 6-1734506-8 9-1734506-2
40 40.0 [1.575] 38.0 [1.496] 1-1734506-9 4-1734506-3 6-1734506-9 9-1734506-3
42 42.0 [1.654] 40.0 [1.575] 2-1734506-0 4-1734506-4 7-1734506-0 9-1734506-4
44 44.0 [1.732] 42.0 [1.654] 2-1734506-1 4-1734506-5 7-1734506-1 9-1734506-5
46 46.0 [1.811] 44.0 [1.732] 2-1734506-2 4-1734506-6 7-1734506-2 9-1734506-6
48 48.0 [1.890] 46.0 [1.811] 2-1734506-3 4-1734506-7 7-1734506-3 9-1734506-7
50 50.0 [1.969] 48.0 [1.890] 2-1734506-4 4-1734506-8 7-1734506-4 9-1734506-8
40* 40.0 [1.575] 38.0 [1.496] — 4-1734506-9 — 9-1734506-9
*Keying position 6.
Receptacle, Thru-Hole,
Vertical
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated, 265°C Process Capable
Contacts — Copper alloy, plated as
follows:
A— 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B— 0.00076 [.000030] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Headers —
pages 66-76, 78, 79
Product Specification
108-57197
Packaging Method — Tray
0.5
[.02]
0.5
[.02]
2.0±0.05
[.079±.002] TYP
2.0±0.1
[.079±.004] TYP
0.75±0.05
[.030±.002] TYP
0.20
[.008] TYP
1.67
[.066] Ref.
2.0±0.05
[.079±.002]
TYP
2.0±0.1
[.079±.004] 4.00
[.157]
4.50
[.177]
0.36
[.014]
B±0.2
[±.008]
L±0.1
[±.004]
A±0.25
[±.01]
Recommended PCB Layout
82
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
4
METRIC
Dimensions are
millimeters over inches
Position Dimensions Part Numbers
AB
66.20 [.244] 4.0 [.157] 1734606-6
88.20 [.323] 6.0 [.236] 1734606-8
10 10.20 [.402] 8.0 [.315] 1-1734606-0
12 12.20 [.480] 10.0 [.394] 1-1734606-2
14 14.20 [.559] 12.0 [.472] 1-1734606-4
16 16.20 [.638] 14.0 [.551] 1-1734606-6
18 18.20 [.717] 16.0 [.630] 1-1734606-8
20 20.20 [.795] 18.0 [.709] 2-1734606-0
22 22.20 [.874] 20.0 [.787] 2-1734606-2
24 24.20 [.953] 22.0 [.866] 2-1734606-4
26 26.20 [1.031] 24.0 [.945] 2-1734606-6
28 28.20 [1.110] 26.0 [1.024] 2-1734606-8
30 30.20 [1.189] 28.0 [1.102] 3-1734606-0
32 32.20 [1.268] 30.0 [1.181] 3-1734606-2
34 34.20 [1.346] 32.0 [1.260] 3-1734606-4
36 36.20 [1.425] 34.0 [1.339] 3-1734606-6
38 38.20 [1.504] 36.0 [1.417] 3-1734606-8
40 40.20 [1.583] 38.0 [1.496] 4-1734606-0
42 42.20 [1.661] 40.0 [1.575] 4-1734606-2
44 44.20 [1.740] 42.0 [1.654] 4-1734606-4
46 46.20 [1.819] 44.0 [1.732] 4-1734606-6
48 48.20 [1.898] 46.0 [1.811] 4-1734606-8
50 50.20 [1.976] 48.0 [1.890] 5-1734606-0
2mm Receptacle, Double Row, Surface Mount, Right-Angle Mount
Note: All part numbers are RoHS compliant.
2mm Receptacle
Receptacle, Surface Mount,
Right-Angle
Material and Finish
Housing — Black Thermoplastic,
UL 94V-0 Rated
Contact — Phosphor Bronze
Contact Finish — 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00229 [.000090] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min.
Nickel Underplated Over All
Related Product Data
Mateable Headers — pages 66-73
Product Specification
108-57197
Packaging Method — Tape and reel
1.00
[.039] TYP
0.60±0.05
[.024±.002] TYP
0.15±0.03
[.006±.001]
5.0±0.2
[.197±.008]
4.90±0.25
[.193±.01]
4.90±0.25
[.193±.01]
8.30±0.5
[.327±.02]
2.00±0.05
[.079±.002]
4.00
[.157]
2.00
[.079]
4.00
[.157] TYP
2.00
[.079] TYP
9.00
[.354]
0.90
[.035]
B
1.10
[.042] TYP
B±0.10
[±.004]
A±0.25
[±.01]
Recommended PCB Layout
AMPMODU Interconnection System
83
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
Position Dimensions Part Numbers
AB
86.0 [.236] 8.50 [.335] 1734531-8
10 8.0 [.315] 10.50 [.413] 1-1734531-0
12 10.0 [.394] 12.50 [.492] 1-1734531-2
14 12.0 [.472] 14.50 [.571] 1-1734531-4
16 14.0 [.551] 16.50 [.650] 1-1734531-6
18 16.0 [.630] 18.50 [.728] 1-1734531-8
20 18.0 [.709] 20.50 [.807] 2-1734531-0
22 20.0 [.787] 22.50 [.886] 2-1734531-2
24 22.0 [.866] 24.50 [.965] 2-1734531-4
26 24.0 [.945] 26.50 [1.043] 2-1734531-6
28 26.0 [1.024] 28.50 [1.122] 2-1734531-8
30 28.0 [1.102] 30.50 [1.201] 3-1734531-0
32 30.0 [1.181] 32.50 [1.280] 3-1734531-2
34 32.0 [1.260] 34.50 [1.358] 3-1734531-4
36 34.0 [1.339] 36.50 [1.437] 3-1734531-6
38 36.0 [1.417] 38.50 [1.516] 3-1734531-8
40 38.0 [1.496] 40.50 [1.594] 4-1734531-0
42 40.0 [1.575] 42.50 [1.673] 4-1734531-2
44 42.0 [1.654] 44.50 [1.752] 4-1734531-4
46 44.0 [1.732] 46.50 [1.831] 4-1734531-6
48 46.0 [1.811] 48.50 [1.909] 4-1734531-8
50 48.0 [1.890] 50.50 [1.988] 5-1734531-0
52 50.0 [1.969] 52.50 [2.067] 5-1734531-2
54 52.0 [2.047] 54.50 [2.146] 5-1734531-4
56 54.0 [2.123] 56.50 [2.224] 5-1734531-6
58 56.0 [2.205] 58.50 [2.303] 5-1734531-8
60 58.0 [2.283] 60.50 [2.381] 6-1734531-0
62 60.0 [2.362] 62.50 [2.461] 6-1734531-2
64 62.0 [2.441] 64.50 [2.539] 6-1734531-4
66 64.0 [2.520] 66.50 [2.618] 6-1734531-6
68 66.0 [2.598] 68.50 [2.697] 6-1734531-8
70 68.0 [2.677] 70.50 [2.776] 7-1734531-0
72 70.0 [2.756] 72.50 [2.854] 7-1734531-2
74 72.0 [2.834] 74.50 [2.933] 7-1734531-4
76 74.0 [2.913] 76.50 [3.012] 7-1734531-6
78 76.0 [2.992] 78.50 [3.091] 7-1734531-8
80 78.0 [3.071] 80.50 [3.169] 8-1734531-0
2mm Receptacle, Double Row, Thru-Hole, Right-Angle Mount
Note: All part numbers are RoHS compliant.
2mm Receptacle
Receptacle, Thru-Hole,
Right-Angle
Material and Finish
Housing — Black Thermoplastic,
UL 94V-0 Rated
Contact — Phosphor Bronze
Contact Finish — 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00254 [.000100] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min.
Nickel Underplated Over All
Related Product Data
Mateable Headers — pages 66-73
Product Specification
108-57197
Packaging Method — Tube
2±0.15
[.079±.006]
2±0.05
[.079±.002]
3±0.02
[.118±.001]
7.2±0.15
[.283±.006]
4.85±0.15
[.191±.006]
1.5±0.05
[.059±.002]
0.5±0.05
[.02±.002]
0.2±0.03
[.008±.001]
0.35
[.014]
1.45
[.057]
5.2
[.205] 2.00
[.079]
2.00
[.079]
TYP
2.00
[.079]
TYP
A±0.10
[±.004]
A
A
A
B±0.20
[±.008]
Recommended PCB Layout
Section A-A
.080
[.031] DIA TYP
84
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
4
METRIC
Dimensions are
millimeters over inches
Receptacle, Top Entry,
Surface Mount
Material and Finish
Housing—Black Thermoplastic,
UL 94V-0 Rated
Contact—Copper Alloy, plated 0.00076
[.000030] Min. Gold Plated on Contact
Area, 0.00254 [.000100] Tin Plated on
Solder Tail, Underplated 0.00127
[.000050] Nickel
Cap—Thermoplastic
Related Product Data
Mateable Headers—pages 66-75,
78, 79
Product Specification
108-57227
Packaging Method—Tape and reel
Dimensions 245C Reflow Part Numbers 265C Reflow Part Numbers
Position ABwith Alignment Peg* without Alignment Peg with Alignment Peg* without Alignment Peg
86.0 [.236] 8.40 [.331] 1734516-8 5-1734516-8 2041069-8 5-2041069-8
10 8.0 [.315] 10.40 [.409] 1-1734516-0 6-1734516-0 1-2041069-0 6-2041069-0
12 10.0 [.394] 12.40 [.488] 1-1734516-2 6-1734516-2 1-2041069-2 6-2041069-2
14 12.0 [.472] 14.40 [.567] 1-1734516-4 6-1734516-4 1-2041069-4 6-2041069-4
16 14.0 [.551] 16.40 [.646] 1-1734516-6 6-1734516-6 1-2041069-6 6-2041069-6
18 16.0 [.630] 18.40 [.724] 1-1734516-8 6-1734516-8 1-2041069-8 6-2041069-8
20 18.0 [.709] 20.40 [.803] 2-1734516-0 7-1734516-0 2-2041069-0 7-2041069-0
22 20.0 [.787] 22.40 [.881] 2-1734516-2 7-1734516-2 2-2041069-2 7-2041069-2
24 22.0 [.866] 24.40 [.961] 2-1734516-4 7-1734516-4 2-2041069-4 7-2041069-4
26 24.0 [.945] 26.40 [1.039] 2-1734516-6 7-1734516-6 2-2041069-6 7-2041069-6
28 26.0 [1.024] 28.40 [1.118] 2-1734516-8 7-1734516-8 2-2041069-8 7-2041069-8
30 28.0 [1.102] 30.40 [1.197] 3-1734516-0 8-1734516-0 3-2041069-0 8-2041069-0
32 30.0 [1.181] 32.40 [1.276] 3-1734516-2 8-1734516-2 3-2041069-2 8-2041069-2
34 32.0 [1.260] 34.40 [1.354] 3-1734516-4 8-1734516-4 3-2041069-4 8-2041069-4
36 34.0 [1.339] 36.40 [1.433] 3-1734516-6 8-1734516-6 3-2041069-6 8-2041069-6
38 36.0 [1.417] 38.40 [1.512] 3-1734516-8 8-1734516-8 3-2041069-8 8-2041069-7
40 38.0 [1.496] 40.40 [1.591] 4-1734516-0 9-1734516-0 4-2041069-0 9-2041069-0
*See views 1a and 1b
Recommended PCB Layout
1b
A
2.00
[.079] TYP
1.12
[.044]
2.25
[.089]
6.00
[.236]
Cavity Mark
Location
Alignment Peg 2
Plc. Ref.
0.96±0.10
[.038±.004]
2.00±0.05
[.079±.002]
A+2.00±0.10
[.079±.004]
A+2.00
[+.079]
0.85±0.05
[.033±.002] DIA TYP
2 Plc.
8.00±0.15
[.315±.006]
4.25±0.15
[.167±.006]
B—8.00/2.00±2.00
[.315/.079±.079]
4.80±0.15
[.189±.006] 4.70+0.25
-0.13
[.185+0.01]
-.005
5.10±0.50
[.201±.020]
0.20±0.03
[.008±.001]
2.00±0.05
[.079±.002]
2.00
[.079]
0.50±0.05
[.020±.002]
0.40±0.05
[.016±.002] 2 Plc.
4.00±0.15
[.157±.006]
B±0.20
[±.008]
X
X6.00±0.15
[.236±.006]
0.71±0.05
[.028±.002]
A±0.10
[±.004]
1a
Recommended PCB Layout
(Without Alignment Peg)
A
2.00
[.079] TYP
1.12
[.044]
2.25
[.089]
6.00
[.236]
2mm Receptacle, Double Row, Surface Mount, Vertical Mount
Note: All part numbers are RoHS compliant.
2mm Receptacle
85
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU .025 [0.64] Square Interconnection System
Note: All part numbers are RoHS compliant.
AMPMODU
Interconnection System
AMPMODU Headers and Receptacles, .100 [2.54] Centerline
102699-4
DR AP
5-103168-3
DR VT
87605-1
Bulkhead
Header
6-146490-5
DR Stacking
Header
5-103164-3
3/4 DR RA
5-103166-3
DR RA
103577-3
6-534237-8
SR Top Entry
6-535541-0
SR Top Entry 87220-8
SR VT
6-146281-0
SR VT BA
6-146293-0
SR VT-RET BA
87227-5
DR VT
103336-5
SR AP
103542-9
DR AP
87230-6
DR RA
87232-9
SR RA
Legend:
SR Single Row
DR Double Row
VT Vertical
RA Right Angle
RET Retention Feature
AP ACTION PIN
BE Bottom Entry
3/4 3-Sided-Shrouded Header
BA Breakaway
TR Triple Row
SMT Surface Mount
HORZ Horizontal
DE Dual Entry
5-103414-8
SR VT
5-102203-7
SR RA
6-146257-0
DR VT BA
7-146268-5
DR VT-RET BA
6-534206-0
DR Top Entry
6-534998-3
DR Top Entry
5-87879-7
SR Bottom Entry
534267-1
DR Outrigger DE
5535676-9
SR HORZ
5535512-1
DR HORZ
5-146427-5
DR RA-RET BA
6-146306-0
SR RA-RET BA 5-146304-6
SR RA
6-146308-0
DR RA BA
For drawings, technical data or samples, contact your TE sales engineer or call the TE Product Information Center: 1-800-522-6752
86
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU .025 [0.64] Square Interconnection System (Continued)
Note: All part numbers are RoHS compliant.
AMPMODU
Interconnection System
For drawings, technical data or samples, contact your TE sales engineer or call the TE Product Information Center: 1-800-522-6752
AMPMODU Headers and Receptacles, .100 [2.54] Centerline
Legend:
SR Single Row
DR Double Row
VT Vertical
RA Right Angle
RET Retention Feature
AP ACTION PIN
BE Bottom Entry
3/4 3-Sided-Shrouded Header
BA Breakaway
TR Triple Row
SMT Surface Mount
HORZ Horizontal
DE Dual Entry
6-146474-0
SR Stacking Header
1-147070-1
.045 Sq. Continuous Post
1-147333-1
.025 Sq. Continuous Post
5-146132-4
SR VT SMT
5-535542-3
DR DE 5147722-9
SR HOR2 SMT
5147721-4
SR HORZ SMT
6-147105-0
DR VT SMT DE
5-103817-2
TR VT
5-146134-9
DR VT SMT
5-147720-9
SR Outrigger DE
5-147738-5
SR VT SMT DE
87
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU .025 [0.64] Square Interconnection System
AMPMODU .025 Square
Interconnection System
The AMPMODU intercon-
nection system provides
interconnections with a
unique modular concept,
utilizing precision formed
receptacle contacts and
mating posts.
Mating of the post and
receptacle contacts of
this system is very tolerant.
This is made possible by
a post with a burr-free
lead-in and a receptacle
contact featuring double
cantilever beams and anti-
overstress stops.
AMPMODU receptacle
contacts and posts categori-
cally fall into three general
classifications of products,
which include: board
mounted posts and recepta-
cle assemblies, post headers
and wire-applied contact
housings for crimp snap-in
pin and receptacle contacts.
Board mounted receptacle
assemblies are available in
various geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking
capabilities.
Crimp snap-in pins for
26-22 AWG [0.12-0.4 mm2]
wire and crimp snap-in
receptacles for 32-20 AWG
[0.03-0.6 mm2] wire provide
excellent discrete wire
terminations. Housings for
these contacts provide ease
of handling terminations in
high density applications.
Machine applied termina-
tions, through matched
application equipment, are
geared for virtually any pro-
duction volume requirement,
for the lowest possible
applied cost.
AMPMODU mating posts
are supplied typically as
headers. They are available
in various populations to
meet the interconnection
and packaging require-
ments of most systems.
However, in instances where
packaging configurations
do not lend themselves to
the economies of headers,
TE can provide application
equipment for the discrete
location of individual posts.
Looking at the electronic
industry's standard “levels of
packaging,” the AMPMODU
.025 [0.64] square intercon-
nection system is primarily
used in levels three and four.
In level three it is used as
a connection between two
or more printed circuits.
A mother/daughter board
connection is typical. In
level four it is used as a
connection between two
subassemblies, such as a
power supply and an asso-
ciated subassembly.
It is also important to note
this product can serve as an
interconnection in more than
one level, depending on the
application.
The .025 [0.64] square
interconnection system
offers the most complete
line of post/receptacle pack-
aging products available
today. This system, rated at
3 amperes per contact, has
been used by almost every
industry and marketplace
over the last decade and is
one of the oldest, most ver-
satile and reliable intercon-
nection systems employing
.025 [0.64] square packag-
ing technology.
Offers standard, intermediate and
high pressure contact forces
Insulation
Support
Barrel
Wire
Crimp
Barrel
Rugged—self-
supporting
one-piece
contact body
Wire entry for post to
receptacle misalignment
Reliability—dual
cantilever spring
contact design
and built-in
anti-overstress
Cantilever
Beams
Wide
Misalignment
Tolerance
Anti-overstress
The AMPMODU receptacle
cross-section is primarily
rectangular, with rounded
corners. Two integral canti-
lever beams contact the
mating square or round
male posts. Deflection of
these spring members is
limited by anti-overstress
stops, and excessive per-
manent deformation is pre-
vented. This feature allows
a wide range for
tolerance of misalignment
of mating contacts.
The configuration of the
receptacle completely
encloses the spring members
preventing damage during
handling and assembly and
makes the system compati-
ble with automatic applica-
tion techniques.
Note: Application of a contact lubricant is part
of the manufacturing process of all AMPMODU
tin-plated crimp products. However, it is not
part of the manufacturing process of products
that customers will solder, then clean. For
these products, TE recommends that
customers use contact lubricant.
See the TE web page for further information.
Receptacle Contacts
Receptacle-Closed
Entry Housing Design
The closed entry housing
style better eliminates the
chance of a mating post
stubbing on the edges of
the receptacle contact.
Closed Entry
Contact edges
enclosed in
plastic
Access Way
Contact edges
enclosed in
plastic
Metallic
post stop
Terms Explained
88
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Wire-to-Board, .100 [2.54] Centerline Products
Wire-to-Board
Products
Wire Size Product Family
AWG [mm2]
20 0.5-0.6 Locking Clip, Mod. IV, IV.v, V, MT, Short Point
22-30 0.3-0.05 Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
32 0.03 Mod. IV, IV.v, V, Short Point
Platings Product Family
.000015 [0.00038] Mod. IV, IV.v, V, MTE, MT, Short Point
Gold
.000030 [0.00076] Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Gold
.000050 [0.00127] Locking Clip, Mod. IV, IV.v, V, MT
Gold
Tin Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Wire Sizes
Contact Platings
Post Lengths Product Family
.210-.283 [5.33-7.19] Mod. IV(.600 [15.24] Profile Height)
.205-.283 [5.21-7.19] Mod. IV.v (.600 [15.24] Profile Height)
.185-.283 [4.70-7.19] Mod. V(.600 [15.24] Profile Height)
.256-.323 [6.50-8.20] Mod. IV(.645 [16.38] Profile Height)
.251-.323 [6.38-8.20] Mod. IV.v (.645 [16.38] Profile Height)
.231-.323 [5.87-8.20] Mod. V(.645 [16.38] Profile Height)
.222-.273 [5.64-6.93] MT Assembly with Standard Pressure Contacts
.200-.273 [5.08-6.93] MT Assembly with High Pressure Contacts
.200-.250 [5.08-6.35] MTE Assembly
.169-.259 [4.29-6.58] Short Point Connector Assembly
.273-.350 [6.93-8.89] Locking Clip (Connector Assembly)
.200-.277 [5.08-7.04] Locking Clip (Single Contact)
Mating Post Lengths
Application Tooling Application Tooling Product Family
Description Mod. IV, MT Locking MTE Short Level V
IV.v, V Clip Point
Manual Hand Tools (Wire Crimp) ••••
Manual Hand Tools (IDC) •••
AMP-O-MATIC Stripper/Crimper •• •
Machines with Applicator
CHAMPOMATOR ••
Model 2.5 Machine
CHAMPOMATOR •
Model 3A Machine
AMP-O-LECTRIC •• •
Machines with Applicator
Pneumatic Hand Tools ••••••
IDC Electric Power Unit •
Tube-Fed Ribbon •
Cable Machine
AMPOMATOR CLS Machines •• •
Discrete Wire Machine ••
Manual Arbor Tool ••
Pneumatic Arbor Tool ••
89
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Board-to-Board Solutions Guide, .100 [2.54] Centerline Products
.100 [2.54] Centerline
Products
Customer Requirement TE's Potential Solution Catalog Page(s)
Mod IV Polarized Housing 220
Application Requires MTE Latched Receptacle and Header 230, 231, 244-250
Guidance, Polarization MT with Polarizing Covers 256-258
Short Point Polarized Housing 224
Wire-to-Wire Application Mod IV Receptacle Contacts and Pins 211-213
Wire-to-Wire Application (Latched) MTE Latched Receptacle and Shrouded Pin Assembly 230, 231, 236, 237
Wire-to-Wire Application (Through Panel) MTE Panel Mount 242
High Vibration and Shock Applications Locking Clip Contacts and Housings 207-209
Printed Circuit Board Polarization MTE Header with PC Board Orientation Peg 248, 249
Board Requires Surface Mount Capability MTE Surface Mount Headers 251, 252
MTE High Temperature Compatible Headers 249, 250
Need to mate to Mod IV Ejection Housing 220
AMP-LATCH Eject Headers
Need to Minimize Strain to Cable MT with Eject Covers 256-259
Mod IV Housing with Strain Relief 218, 219
Application Requires Locking Clip Contacts 207, 298
Self-Retaining Contacts
Header Secured to Board MTE Headers with Post Retention or Holddowns 244-250
During/Prior to Soldering
Mate to Unshrouded Header Mod IV plain Housing with Mod V Contacts 213, 214, 216
with Retention Requirements MTE with High Pressure Contacts 234, 235
Multiple Cables to be MTE Coupling Shroud, Double- or Single-Row 240, 241
Common to One Header
Right-Angle Cable Dress MT with Hermaphroditic Covers 229, 256, 257, 259
Application Requires Crimp Short Point Contacts 222
Contacts and MTE Housings
Housings and End-to-End and Short Point Double-Row Housing, 223, 228, 229
Side-to-Side Stackable MTE Plain Housing
Connector Must Mate to Short Point Contacts 222
Post Lengths of .169 [4.29] Min.
Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products
Single-Row Single-Row Double-Row Double-Row
Problem or Concern TE's Vertical Headers Right-Angle Headers, Vertical Headers Right-Angle Headers,
Potential Solution and Receptacles Horizontal Receptacles and Receptacles Horizontal Receptacles
(Page Ref.) (Page Ref.) (Page Ref.) (Page Ref.)
Headers Float Off Board HEADERS Retention Feature:
Soldering Operation Unshrouded 102 103 198 199
Shrouded ——104, 199 105, 200
Header Contacts Damaged Shrouded HEADERS:
During Manufacturing Standard Profile 115 116 117-121 122-128
Operation or In-Field Use
Press-Fit ACTION PIN POST
HEADERS:
Unshrouded 146 — 147 —
Shrouded——148, 149, 199 —
Machine Applied 163, 164
Posts
Board/Backplane Requires Surface-Mount Compatible Thru-Hole:
High Temperature Surface- HEADERS:
Mount Compatibility Unshrouded 102* 103* 104* 105*
Shrouded ——130*, 137* 138*
(Low Profile)
RECEPTACLES ——196* 195*
Surface-Mount:
HEADERS 109* — 110 —
RECEPTACLES 187, 188 172 189-192 173
Application Requires Board Two-Piece Family: w/Guide Posts:
Guidance, Polarization and/or HEADERS ——198, 199 200
Blind-Mate Capability RECEPTACLES ——196* 195*
Mod IV Low Profile
RECEPTACLES:
Reduction in Parallel TOP ENTRY:
Board-to-Board Stack Height Thru-Hole 178 — 179, 180* —
Necessary (Refer to Parallel Surface-Mount —— — —
Stack Guide on Page 62.) BOTTOM ENTRY:
Thru-Hole 177 ———
Surface-Mount —— — —
DUAL ENTRY
Thru-Hole 181 — 182-184 —
Surface Mount 187, 188 — 189-192 —
Soldering Problems with RECEPTACLES:
Thru-Hole Bottom Entry Bottom Entry
Receptacles (Must Mask Outrigger 181 — 182 —
Post Holes in Board During (Separate Holes for
Soldering Operation) Receptacle Leads
and Mating Leads)
End-to-End Stackable:
HEADERS (Unshrouded):
Application Requires Thru-Hole 93, 102 94, 95, 103* 96, 97, 104* 98. 99. 105
Connectors to be End-to-End Thru-Hole* 102* 103* 104* 108*
Stackable on .100 [2.54] Grid Surface-Mount 109* — 110* —
RECEPTACLES:
Thru-Hole 175, 177, 178, 181 169* 176, 179, 180*, 182*, 183, 184 170
Surface Mount 188 172 191, 192 173
*High temperature compatible version, refer to page ref. listed.
90
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mating Post Selection Guide
Mating Post
Selection Guide
The following selection
guide is provided to help in
choosing a mating product
after a receptacle, header
or post has been selected.
In some instances refer-
ences are given on the cat-
alog page to specific mat-
ing connectors. In other
instances the reader is
referred here to the selec-
tion guide for mating prod-
uct recommendations.
If your application require-
ment is not answered here,
consult TE for further
recommendations.
Posts Without Shoulders
For drawn wire products
(ie, AMPMODU Breakaway
and Low Profile Headers)
and for products having the
shoulder of the post below
the housing or pc board
surface (ie, AMPMODU
MTE and Single Row
Shrouded Headers) the
effective mating length
starts at the housing or
pc board surface.
Posts With Shoulders
For product having the
shoulder of the post
extending above the hous-
ing or pc board surface
(ie, Standard AMPMODU
Shrouded and Unshrouded
Headers) the effective mat-
ing length starts at the top
of the shoulder.
Recommended
Effective
Receptacle Type Mating Posts Lengths
Minimum Maximum
AMPMODU Mod II Horizontal Board Mount
Receptacle, Single and Double Row, Short .230 [5.84] .280 [7.11]
Point-of-Contact—pages 169, 170, 172, 173
AMPMODU Mod II Vertical Board Mount
Receptacle, Single Row, Standard Profile, .183 [4.65] .330 [8.38]
Top Entry—page 175
AMPMODU Mod II Vertical
Board Mount Receptacle, Standard .183 [4.65] .330 [8.38]
Profile, Double Row, Top Entry,
100 x .100 mt.—page 176
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low .183 [4.65] .255 [6.48]
Profile, Single Row, Top Entry, Single Tine—
page 178
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low .280 [7.11]
Profile, Single Row, Bottom Entry— *
page 177
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low .183 [4.65] .255 [6.48]
Profile, Double Row, Top Entry—
pages 179, 180
AMPMODU Surface-Mount Receptacle,
Top Entry
.183 [4.65] *
Vertical Board Mount,
Single Row, Dual Entry—page 187, 188
Bottom Entry
.204 [5.18] *
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Top Entry
.183 [4.65] *
Profile, Double Row, Dual Entry—
Bottom Entry
.204 [5.18] *
page 182
AMPMODU Surface-Mount Receptacle,
Top Entry
.183 [4.65] *
Vertical Board Mount, Double Row,
Dual Entry—page 189-192
Bottom Entry
.204 [5.18] *
AMPMODU .600 [15.24] Mod IV
Housing with Standard Pressure Contacts— .210 [5.33] .283 [7.19]
pages 211-220
AMPMODU .600 [15.24] Mod IV
Housing with Intermediate Pressure Contacts— .205 [5.21] .283 [7.19]
pages 211-220
AMPMODU .600 [15.24] Mod IV
Housing with High Pressure Contacts— .185 [4.70] .283 [7.19]
pages 211-220
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Top Entry
.183 [4.65] *
Profile, Single Row, Dual Entry—
Bottom Entry
.204 [5.18] *
page 181
Recommended
Effective
Receptacle Type Mating Posts Lengths
Minimum Maximum
Short Point Housing with Contacts— .169 [4.29] .259 [6.58]
pages 222-224
AMPMODU MTE Unloaded Housing with .169 [4.29] .259 [6.58]
Short Point Contacts—pages 222, 229, 231, 233
AMPMODU MTE .200 [5.08] .250 [6.35]
IDC Assemblies
AMPMODU MT IDC Assembly with .222 [5.64] .273 [6.93]
Standard Pressure Contacts—page 256
AMPMODU MT IDC Assembly with .200 [5.08] .273 [6.93]
High Pressure Contacts—page 257
Locking Clip Housing with .273 [6.93] .350 [8.89]
Contacts—pages 207-209
Locking Clip Contact without .200 [5.08] .277 [7.04]
Housing—page 207
Flexible Flat Conductor Cable Single Row .267 [6.78] .323 [8.20]
Receptacle with Round Wire
Crimp High Pressure Contact— Double Row .282 [7.16] .323 [8.20]
Catalog 82007
Flexible Flat Conductor Cable Single Row .210 [5.33] .323 [8.20]
Receptacle with Multiple Wire
Crimp High Pressure Contact— Double Row .225 [5.72] .323 [8.20]
Catalog 82007
Flexible Flat Conductor Cable Single Row .267 [6.78] .323 [8.20]
Receptacle with Round Wire
Crimp Standard Pressure Double Row .282 [7.16] .323 [8.20]
Contact—Catalog 82007
Flexible Flat Conductor Cable Single Row .220 [5.59] .323 [8.20]
Receptacle with Multiple Crimp
Standard Pressure Contact— Double Row .235 [5.97] .323 [8.20]
Catalog 82007
*Maximum post length is determined by customer’s application; (i.e., available
space beyond rear of horizontal receptacle assembly, or above bottom entry ver-
tical receptacle assembly or below vertical receptacle assemblies used in pass
through applications).
Effective
Mating
Length
Effective
Mating
Length
91
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Parallel Stacking Guide for Board-to-Board Applications
Parallel Stacking
Guide
See Dimension Product Family
Figure Between Headers Single-Row Double-Row Product Family Single-Row Double-Row
Below PC Boards (See Note 1.) (Page Ref.) (Page Ref.) Receptacles (Page Ref.) (Page Ref.)
.060 [1.52] Bandolier Posts 163 NA Dual Entry, Mod IV 177, 181, 182-184,
187, 188 189-192
1.090 [2.29] Breakaway** 102** 104** Dual Entry, Mod IV 177, 181, 182-184,
(Unshrouded) 187, 188 189-192
.153 [3.89] Surface Mount** NA 110 Dual Entry, Mod IV 177, 181, 182-184,
Breakaway (Unshrouded) 187, 188 189-192
.265 [6.73] Bandolier Posts 163 137** Top Entry, Mod IV 178, 181 179, 180,
187, 188 182-184, 189-192
2.355 [9.02] Breakaway** 102** 104** Top Entry, Mod IV 178, 181 179, 180,
(Unshrouded) 187, 188 182-184, 189-192
.385 [9.78] Low Profile Shrouded NA 135, 137** Top Entry, Mod IV NA 179,180
3.418 [1.06] Surface Mount** 109 110 Surface Mount**, Mod IV, 187, 188 189-192
Breakaway (Unshrouded) Top Entry
2* .430 [10.92] Breakaway** 102** 104** Top Entry, Mod II 175 176
(Unshrouded)
4* .440 [11.18] Shrouded, Mod II 115, 116 117, 119 Top Entry, Mod II or Mod IV 175, 178 176, 179, 180
.528 [13.41] Stacking Shroud NA 156 (Hood) Inner Board Receptacle NA 157
(See Note 2.) (See Note 2.)
.547 [13.89] Stacking Shroud NA 160 Outer Board Receptacle NA 158
(See Note 2.) (See Note 2.)
4.550 [13.97] Two-Piece Header NA 198, 199 Two-Piece Receptacle** NA 196**
Connector System Connector System
.748 [19.00] Stacking Shroud NA 156 (Hood) Inner Board Receptacle NA 157
(See Note 2.) (See Note 2.)
.768 [19.51] Stacking Shroud NA 161 Outer Board Receptacle NA 158
(See Note 2.) (See Note 2.)
Various Stacking Unshrouded 112 113 Mod II/IV Receptacles, Various Various
Top/Bottom Entry
**High temperature version available, see page ref. listed.
Notes: 1. Headers listed are standard thru-hole versions. Many headers are available with retention feature and ACTION PIN posts. See product
Notes: 1. specification pages in individual sections for option availability.
Notes: 2. These headers and receptacles are Related Board-to-Board products. They are not part of the AMPMODU .025 [0.64] Square Product Family.
Board-to-Board
Stacking Heights
(By Receptacle/Header
Combination)
Figure 1
Double-Row, Mod IV,
Bottom Entry, Breakaway Header
Receptacle Assembly
.265
[6.73]
.090
[2.29] Header
Figure 2
Double-Row, Mod IV,
Top Entry, Breakaway Header
*Mod II Receptacle Height
is .340 [8.64] for a total
stack height of .430 [10.92]
Receptacle Assembly
.265*
[6.73]
.090
[2.29]
Figure 3
Double-Row, Mod IV,
Surface-Mount, Top Entry,
Receptacle and Surface-Mount
Breakaway Header
Receptacle Assembly
.418
[10.62]
.153
[3.89] Header
.265
[6.73]
Figure 4
Double-Row, Two-Piece
Receptacle and Two-Piece
Shrouded Header
*Mod II Shrouded Header Height
is .440 [11.18] for a total
stack height of .440 [11.18]
.550*
[13.97]
.355
[9.02]
Header
92
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded
Unshrouded Headers
Product Facts
■Variety of popular sizes
available
■Substantial time/labor
savings—install all posts
at one time
■Vertical and right-angle
versions available in
single- and double-row
configurations
■Triple-row version available
in vertical configuration
with .230 [5.84] mating
length
■Copper alloy posts
■Choice of select gold or
tin plated posts
■Mating length for single and
double row is .318 [8.08]
(.278 [7.06] effective mat-
ing length-see page 90)
■Flame retardant, black
thermoplastic housings;
94V-0 rated
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Electrical
Insulation Resistance — 5,000
megohms minimum initial
Dielectric Withstanding Voltage —
750 V rms at sea level
Environmental
Operating Temperature —
-65°C to +105°C (black thermoplastic
housings)
Current — 3 amperes maximum
per contact (dependent upon mating
connector)
R
R
93
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline
Unshrouded Headers
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
1.084 [2.13] — 87220-1 87224-1
2.184 [4.67] .100 [2.54] 87220-2 87224-2
3.284 [7.21] .200 [5.08] 87220-3 87224-3
4.384 [9.75] .300 [7.62] 87220-4 87224-4
5.484 [12.29] .400 [10.16] 87220-5 87224-5
6.584 [14.83] .500 [12.70] 87220-6 87224-6
7.684 [17.37] .600 [15.24] 87220-7 87224-7
8.784 [19.91] .700 [17.78] 87220-8 87224-8
9.884 [22.45] .800 [20.32] 87220-9 87224-9
10 .984 [24.99] .900 [22.86] 1-87220-0 1-87224-0
11 1.084 [27.53] 1.000 [25.40] 1-87220-1 1-87224-1
12 1.184 [30.07] 1.100 [27.94] 1-87220-2 1-87224-2
13 1.284 [32.61] 1.200 [30.48] 1-87220-3 1-87224-3
14 1.384 [35.15] 1.300 [33.02] 1-87220-4 1-87224-4
15 1.484 [37.69] 1.400 [35.56] 1-87220-5 1-87224-5
16 1.584 [40.23] 1.500 [38.10] 1-87220-6 1-87224-6
17 1.684 [42.77] 1.600 [40.64] 1-87220-7 1-87224-7
18 1.784 [45.31] 1.700 [43.18] 1-87220-8 1-87224-8
19 1.884 [47.85] 1.800 [45.72] 1-87220-9 1-87224-9
20 1.984 [50.39] 1.900 [48.26] 2-87220-0 2-87224-0
21 2.084 [52.93] 2.000 [50.80] 2-87220-1 2-87224-1
22 2.184 [55.47] 2.100 [53.34] 2-87220-2 2-87224-2
23 2.284 [58.01] 2.200 [55.88] 2-87220-3 2-87224-3
24 2.384 [60.55] 2.300 [58.42] 2-87220-4 2-87224-4
25 2.484 [63.09] 2.400 [60.96] 2-87220-5 2-87224-5
26 2.584 [65.63] 2.500 [63.50] 2-87220-6 2-87224-6
27 2.684 [68.17] 2.600 [66.04] 2-87220-7 2-87224-7
28 2.784 [70.71] 2.700 [68.58] 2-87220-8 2-87224-8
29 2.884 [73.25] 2.800 [71.12] 2-87220-9 2-87224-9
30 2.984 [75.79] 2.900 [73.66] 3-87220-0 3-87224-0
31 3.084 [78.33] 3.000 [76.20] 3-87220-1 3-87224-1
32 3.184 [80.87] 3.100 [78.74] 3-87220-2 3-87224-2
33 3.284 [83.41] 3.200 [81.28] 3-87220-3 3-87224-3
34 3.384 [85.95] 3.300 [83.82] 3-87220-4 3-87224-4
35 3.484 [88.49] 3.400 [86.36] 3-87220-5 3-87224-5
36 3.584 [91.03] 3.500 [88.90] 3-87220-6 3-87224-6
37 3.684 [93.57] 3.600 [91.44] 3-87220-7 3-87224-7
38 3.784 [96.11] 3.700 [93.98] 3-87220-8 3-87224-8
39 3.884 [98.65] 3.800 [96.52] 3-87220-9 3-87224-9
40 3.984 [101.19] 3.900 [99.06] 4-87220-0 4-87224-0
A.200
[5.08] Ref.
(Contact Area)
B
.042
[1.07]
Typ.
.025 [0.64] Square
Straight Post
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated as fol-
lows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Tin/Nickel — Plating option available;
minimum order quantities may apply.
Consult TE.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.125
[3.18]
.318
[8.08]
.046/.038
[1.17/0.97]
B
.100*
[2.54]
.035±.003
[0.89±0.08] Dia.Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.100
[2.54] Typ.
.090
[2.29]
.050
[1.27] Max. Typ.
Note: All part numbers are RoHS
compliant.
94
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Unshrouded Headers
.025
[0.64]
Typ.
.139
[3.53]
Ref.
.025 [0.64] Square
Right-Angle Post
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Tin/Nickel — Plating option available;
minimum order quantities may apply.
Consult TE.
Related Product Data
Mateable Connectors — Refer
to the Mating Post Selection Guide —
page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
B
.100*
[2.54]
Typ.
.035±.003
[0.89±0.08] Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.138
[3.51]
Ref. .110
[2.79]
Ref.
.025±.001 T
yp.
[0.63±0.03]
.069
[1.75]
Typ.
.200 [5.08]
Contact Area
.040
[1.02]
Ref.
.025±.002 T
yp.
[0.63±0.05]
.318
[8.08]
Ref.
.100
[2.54]
.025
[0.64]
.069
[1.75]
.157
[3.99]
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
1.084 [2.13] — 87232-1 87233-1
2.184 [4.67] .100 [2.54] 87232-2 87233-2
3.284 [7.21] .200 [5.08] 87232-3 87233-3
4.384 [9.75] .300 [7.62] 87232-4 87233-4
5.484 [12.29] .400 [10.16] 87232-5 87233-5
6.584 [14.83] .500 [12.70] 87232-6 87233-6
7.684 [17.37] .600 [15.24] 87232-7 87233-7
8.784 [19.91] .700 [17.78] 87232-8 87233-8
9.884 [22.45] .800 [20.32] 87232-9 87233-9
10 .984 [24.99] .900 [22.86] 1-87232-0 1-87233-0
11 1.084 [27.53] 1.000 [25.40] 1-87232-1 1-87233-1
12 1.184 [30.07] 1.100 [27.94] 1-87232-2 1-87233-2
13 1.284 [32.61] 1.200 [30.48] 1-87232-3 1-87233-3
14 1.384 [35.15] 1.300 [33.02] 1-87232-4 1-87233-4
15 1.484 [37.69] 1.400 [35.56] 1-87232-5 1-87233-5
16 1.584 [40.23] 1.500 [38.10] 1-87232-6 1-87233-6
17 1.684 [42.77] 1.600 [40.64] 1-87232-7 1-87233-7
18 1.784 [45.31] 1.700 [43.18] 1-87232-8 1-87233-8
19 1.884 [47.85] 1.800 [45.72] 1-87232-9 1-87233-9
20 1.984 [50.39] 1.900 [48.26] 2-87232-0 2-87233-0
.042
[1.07]
Typ.
A
B
95
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Unshrouded Headers
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
21 2.084 [52.93] 2.000 [50.80] 2-87232-1 2-87233-1
222.184 [55.47] 2.100 [53.34] 2-87232-2 2-87233-2
232.284 [58.01] 2.200 [55.88] 2-87232-3 2-87233-3
24 2.384 [60.55 2.300 [58.42] 2-87232-4 2-87233-4
252.484 [63.09] 2.400 [60.96] 2-87232-5 2-87233-5
262.584 [65.63] 2.500 [63.50] 2-87232-6 2-87233-6
27 2.684 [68.17] 2.600 [66.04] 2-87232-7 2-87233-7
28 2.784 [70.71] 2.700 [68.58] 2-87232-8 2-87233-8
292.884 [73.25] 2.800 [71.12] 2-87232-9 2-87233-9
302.984 [75.79] 2.900 [73.66] 3-87232-0 3-87233-0
31 3.084 [78.33] 3.000 [76.20] 3-87232-1 3-87233-1
32 3.184 [80.87] 3.100 [78.74] 3-87232-2 3-87233-2
333.284 [83.41] 3.200 [81.28] 3-87232-3 3-87233-3
34 3.385 [85.95] 3.300 [83.82] 3-87232-4 3-87233-4
35 3.484 [88.49] 3.400 [86.36] 3-87232-5 3-87233-5
363.584 [91.03] 3.500 [88.90] 3-87232-6 3-87233-6
373.684 [93.57] 3.600 [91.44] 3-87232-7 3-87233-7
38 3.784 [96.11] 3.700 [93.98] 3-87232-8 3-87233-8
39 3.884 [98.65] 3.800 [96.52] 3-87232-9 3-87233-9
403.984 [101.19] 3.900 [99.06] 4-87232-0 4-87233-0
96
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Unshrouded Headers
A
.200
[5.08] Ref.
(Contact Area)
B
.042
[1.07]
Typ.
.025 [0.64] Square
Straight Post
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Tin/Nickel — Plating option available;
minimum order quantities may apply.
Consult TE.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.125
[3.18]
.318
[8.08]
.046/.038
[1.17/0.97]
B
.100*
[2.54]
.035±.003
[0.89±0.08] Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.100
[2.54]
.100
[2.54] T
yp.
.100*
[2.54]
.090
[2.29]
.050
[1.27] Max. Typ.
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
2.084 [2.13] — 1-87215-0 87227-1
4.184 [4.67] .100 [2.54] 1-87215-1 87227-2
6.284 [7.21] .200 [5.08] 1-87215-2 87227-3
8.384 [9.75] .300 [7.62] 87215-1 87227-4
10 .484 [12.29] .400 [10.16] 87215-2 87227-5
12 .584 [14.83] .500 [12.70] 87215-3 87227-6
14 .684 [17.37] .600 [15.24] 87215-4 87227-7
16 .784 [19.91] .700 [17.78] 87215-5 87227-8
18 .884 [22.45] .800 [20.32] 87215-6 87227-9
20 .984 [24.99] .900 [22.86] 87215-7 1-87227-0
22 1.084 [27.53] 1.000 [25.40] 1-87215-3 1-87227-1
24 1.184 [30.07] 1.100 [27.94] 87215-8 1-87227-2
26 1.284 [32.61] 1.200 [30.48] 87215-9 1-87227-3
28 1.384 [35.15] 1.300 [33.02] 1-87215-4 1-87227-4
30 1.484 [37.69] 1.400 [35.56] 1-87215-5 1-87227-5
32 1.584 [40.23] 1.500 [38.10] 1-87215-6 1-87227-6
34 1.684 [42.77] 1.600 [40.64] 1-87215-7 1-87227-7
36 1.784 [45.31] 1.700 [43.18] 1-87215-8 1-87227-8
38 1.884 [47.85] 1.800 [45.72] 1-87215-9 1-87227-9
40 1.984 [50.39] 1.900 [48.26] 2-87215-0 2-87227-0
97
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Unshrouded Headers
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
422.084 [52.93] 2.000 [50.80] 2-87215-1 2-87227-1
442.184 [55.47] 2.100 [53.34] 2-87215-2 2-87227-2
46 2.284 [58.01] 2.200 [55.88] 2-87215-3 2-87227-3
48 2.384 [60.55] 2.300 [58.42] 2-87215-4 2-87227-4
502.484 [63.09] 2.400 [60.96] 2-87215-5 2-87227-5
522.584 [65.63] 2.500 [63.50] 2-87215-6 2-87227-6
54 2.684 [68.17] 2.600 [66.04] 2-87215-7 2-87227-7
56 2.784 [70.71] 2.700 [68.58] 2-87215-8 2-87227-8
582.884 [73.25] 2.800 [71.12] 2-87215-9 2-87227-9
60 2.984 [75.79] 2.900 [73.66] 3-87215-0 3-87227-0
62 3.084 [78.33] 3.000 [76.20] 3-87215-1 3-87227-1
643.184 [80.87] 3.100 [78.74] 3-87215-2 3-87227-2
663.284 [83.41] 3.200 [81.28] 3-87215-3 3-87227-3
68 3.384 [85.95] 3.300 [83.82] 3-87215-4 3-87227-4
70 3.484 [88.49] 3.400 [86.36] 3-87215-5 3-87227-5
723.584 [91.03] 3.500 [88.90] 3-87215-6 3-87227-6
74 3.684 [93.57] 3.600 [91.44] 3-87215-7 3-87227-7
76 3.784 [96.11] 3.700 [93.98] 3-87215-8 3-87227-8
783.884 [98.65] 3.800 [96.52] 3-87215-9 3-87227-9
803.984 [101.19] 3.900 [99.06] 4-87215-0 4-87227-0
98
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Unshrouded Headers
B
.042
[1.07]
Typ.
.025 [0.64] Square
Right-Angle Post
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Tin/Nickel — Plating option available;
minimum order quantities may apply.
Consult TE.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
B
.100*
[2.54]
.035±.003
[0.89±0.08] Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
2.084 [2.13] — 1-86479-3 87230-1
4.184 [4.67] .100 [2.54] 1-86479-4 87230-2
6.284 [7.21] .200 [5.08] 1-86479-5 87230-3
8.384 [9.75] .300 [7.62] 1-86479-6 87230-4
10 .484 [12.29] .400 [10.16] 86479-3 87230-5
12 .584 [14.83] .500 [12.70] 86479-4 87230-6
14 .684 [17.37] .600 [15.24] 86479-5 87230-7
16 .784 [19.91] .700 [17.78] 86479-2 87230-8
18 .884 [22.45] .800 [20.32] 86479-6 87230-9
20 .984 [24.99] .900 [22.86] 86479-1 1-87230-0
22 1.084 [27.53] 1.000 [25.40] 1-86479-7 1-87230-1
24 1.184 [30.07] 1.100 [27.94] 86479-7 1-87230-2
26 1.284 [32.61] 1.200 [30.48] 1-86479-0 1-87230-3
28 1.384 [35.15] 1.300 [33.02] 1-86479-8 1-87230-4
30 1.484 [37.69] 1.400 [35.56] 1-86479-9 1-87230-5
32 1.584 [40.23] 1.500 [38.10] 2-86479-0 1-87230-6
34 1.684 [42.77] 1.600 [40.64] 2-86479-1 1-87230-7
36 1.784 [45.31] 1.700 [43.18] 2-86479-2 1-87230-8
38 1.884 [47.85] 1.800 [45.72] 2-86479-3 1-87230-9
40 1.984 [50.39] 1.900 [48.26] 2-86479-4 2-87230-0
.100
[2.54]
T
yp.
.318
[8.08]
.157
[3.99]
A
.200
[5.08] Ref.
(Contact Area)
.100
[2.54]
.100
[2.54]
.110
[2.79]
.042
[1.07]
.100*
[2.54]
.069
[1.75]
.289
[7.34]
99
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Unshrouded Headers
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
422.084 [52.93] 2.000 [50.80] 2-86479-5 2-87230-1
442.184 [55.47] 2.100 [53.34] 2-86479-6 2-87230-2
46 2.284 [58.01] 2.200 [55.88] 2-86479-7 2-87230-3
48 2.384 [60.55] 2.300 [58.42] 2-86479-8 2-87230-4
502.484 [63.09] 2.400 [60.96] 2-86479-9 2-87230-5
522.584 [65.63] 2.500 [63.50] 3-86479-0 2-87230-6
54 2.684 [68.17] 2.600 [66.04] 3-86479-1 2-87230-7
56 2.784 [70.71] 2.700 [68.58] 3-86479-2 2-87230-8
582.884 [73.25] 2.800 [71.12] 3-86479-3 2-87230-9
60 2.984 [75.79] 2.900 [73.66] 3-86479-4 3-87230-0
62 3.084 [78.33] 3.000 [76.20] 3-86479-5 3-87230-1
643.184 [80.87] 3.100 [78.74] 3-86479-6 3-87230-2
663.284 [83.41] 3.200 [81.28] 3-86479-7 3-87230-3
68 3.384 [85.95] 3.300 [83.82] 3-86479-8 3-87230-4
70 3.484 [88.49] 3.400 [86.36] 3-86479-9 3-87230-5
723.584 [91.03] 3.500 [88.90] 4-86479-0 3-87230-6
74 3.684 [93.57] 3.600 [91.44] 4-86479-1 3-87230-7
76 3.784 [96.11] 3.700 [93.98] 4-86479-2 3-87230-8
783.884 [98.65] 3.800 [96.52] 4-86479-3 3-87230-9
803.984 [101.19] 3.900 [99.06] 4-86479-4 4-87230-0
100
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Headers—Unshrouded, Triple-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Unshrouded Headers
B
A
.042
[1.07]
Typ.
.025 [0.64] Square
Straight Post
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, duplex
plated 000030 [0.00076] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder area,
with entire post underplated .000050
[0.00127] nickel
Technical Documents — page 276
See mating connector for applicable
product and application specifications. B
.100*
[2.54]
.035±.003
[0.89±0.08] Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of Dimensions Part Nos.
Pos. AB
9.284 [7.21] .200 [5.08] 5-103817-1
12 .384 [9.75] .300 [7.62] 5-103817-2
15 .484 [12.29] .400 [10.16] 5-103817-3
18 .584 [14.83] .500 [12.70] 5-103817-4
21 .684 [17.37] .600 [15.24] 5-103817-5
24 .784 [19.91] .700 [17.78] 5-103817-6
27 .884 [22.45] .800 [20.32] 5-103817-7
30 .984 [24.99] .900 [22.86] 5-103817-8
33 1.084 [27.53] 1.000 [25.40] 5-103817-9
42 1.384 [35.15] 1.300 [33.02] 6-103817-2
45 1.484 [37.69] 1.400 [35.56] 6-103817-3
60 1.984 [50.39] 1.900 [48.26] 6-103817-8
69 2.284 [58.01] 2.200 [55.88] 7-103817-1
72 2.384 [60.55] 2.300 [58.42] 7-103817-2
96 3.184 [80.87] 3.100 [78.74] 8-103817-0
120 3.984 [101.19] 3.900 [99.06] 8-103817-8
.100
[2.54]
Typ.
.120
[3.05]
.185
[4.70] Ref.
(Contact Area)
.230
[5.84]
.338
[8.59]
.100*
[2.54]
.120
[3.05]
.100
[2.54]
T
yp.
.100*
[2.54]
.069
[1.75]
T
yp.
101
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Breakaway and Retention Headers—Unshrouded
Breakaway and Retention
Headers—Unshrouded
Product Facts
■Design and inventory
versatility—headers can be
broken into any size needed
■Variety of popular sizes
available
■Substantial time/labor
savings can install all posts
at one time
■Vertical and right-angle
versions available in
single- and double-row
configurations
■Phosphor bronze posts
■Choice of gold duplex or
tin plated posts
■Post lengths include .230
[5.84] and .318 [8.08] for
connector mating
■Board retention feature
available
■Black, glass-filled
thermoplastic housings;
high temperature
compatible
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Electrical
Insulation Resistance — 5,000
megohms minimum initial
Dielectric Withstanding Voltage —
750 V rms at sea level
Environmental
Operating Temperature —
-65°C to +105°C (black thermoplastic
housings)
Current — 3 amperes maximum
per contact (dependent upon mating
receptacle)
R
R
102
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Breakaway Headers—Unshrouded, Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Breakaway and Retention
Headers-Unshrouded
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Headers with Solder Tails
Material and Finish
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
tail, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
tail, with entire post underplated .000050
[0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.025 [0.64] Square
Straight Posts A
B
ERef.
(Contact Area)
B
.025
[0.64]
T
yp.
.045
[1.14]
Typ.
.090±.002
[2.29±0.05]
D
C
.090
[2.29]
C = .090 [2.29] C = .120 [3.05] C = .125 [3.18]
Header No. of Dimensions D = .230 [5.84] D = .230 [5.84] D = .318 [8.08]
Style Pos. AB
E = .185 [4.70] E = .185 [4.70] E = .200 [5.08]
Post Plating/Part Nos. Post Plating/Part Nos. Post Plating/Part Nos.
Plating A Plating B Plating C Plating A Plating B Plating C Plating A Plating B Plating C
With — 5-146285-1 5-146284-1 5-146282-1 5-146281-1 5-146280-1 5-146278-1 5-146277-1 5-146276-1 5-146274-1
Solder Tails 1.084 [2.13]
(See Notes 40 9-146285-0 9-146284-0 9-146282-0 9-146281-0 9-146280-0 9-146278-0 9-146277-0 9-146276-0 9-146274-0
1 and 2.) 3.984 [101.19] 3.900 [99.06]
With Board 5-146297-3 5-146296-3 5-146294-3 5-146293-3 5-146292-3 5-146290-3 5-146289-3 5-146288-3 5-146286-3
Retention Tails 3.284 [7.21] .200 [5.08]
(See Notes 40 9-146297-0 9-146296-0 9-146294-0 9-146293-0 9-146292-0 9-146290-0 9-146289-0 9-146288-0 9-146286-0
2 and 3.) 3.984 [101.19] 3.900 [99.06]
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails). When ordering, add the prefix and/or suffix (dash)
numbers plus 5- -0 to the base part number that corresponds with the desired size. For example, the complete part number for an 8-position header with solder tails (C dimension
.090 [2.29], post plating A) would be 5-146285-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05], post plating B) would
be 7-146292-6. This part numbering system applies only to this page.
3. For C dimensions .120 [3.05] and .125 [3.18], board retention using kinked tails are for headers 6 positions and smaller; headers 7 positions and larger use swaged tails.
Headers with a C dimension of .090 [2.29] have swaged tails for all sizes.
.030±.002
[0.76±0.05]
.035±.003
[0.89±0.08] Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02] Dia. Typ.
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
A
B
ERef.
(Contact Area)
B
.025
[0.64]
Typ.
.045
[1.14]
Typ.
.150±.002
[3.81±0.05]
D
C
(see
note 3)
.090
[2.29]
.030±.002
[0.76±0.05]
.040±.003
[1.02±0.08] Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02] Dia. Typ.
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
Headers with Board Retention Tails
.100*
[2.54]
.100*
[2.54]
103
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Breakaway Headers—Unshrouded, Single-Row,
.100 [2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Breakaway and Retention
Headers-Unshrouded
A
D
C
ERef.
(Contact
Area)
.100*
[2.54]
B
.138
[3.51]
.042
[1.07]
(2 Plc.)
.090
[2.29]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
Posts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on con-
tact area, .000100-.000200 [0.00254-
0.00508] matte tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.025 [0.64] Square
Right-Angle Posts
.100
[2.54] Typ.
.140
[3.56]
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Headers with Solder Tails
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
Headers with Board Retention Tails
.045
[1.14]
T
yp.
.090±.002
[2.29±0.05]
.030±.002
[0.76±0.05]
.035±.003
[0.89±0.08] Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02] Dia. Typ.
D
C
.090
[2.29]
.140
[3.56]
ERef.
(Contact
Area)
A
B
.138
[3.51]
.042
[1.07]
(2 Plc.)
.100
[2.54] T
yp.
.100*
[2.54]
.045
[1.14]
Typ.
.030±.002
[0.76±0.05]
.040±.003
[1.02±0.08] Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02] Dia. Typ.
.150±.002
[3.81±0.05]
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
C = .120 [3.05] C = .110 [2.79]
Header No. of Dimensions D = .230 [5.84] D = .318 [8.08]
Style Pos. AB
E = .185 [4.70] E = .200 [5.08]
Part Nos. Part Nos.
With — 5-146304-1 5-146305-1
Solder Tails 1.084 [2.13]
(See Notes 40 9-146304-0 9-146305-0
1 and 2.) 3.984 [101.19] 3.900 [99.06]
With Board — 5-146306-3 5-146307-3
Retention Tails
3.084 [2.13]
(See Note 2.) 40 9-146306-0 9-146307-0
3.984 [101.19] 3.900 [99.06]
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails).
When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the number
of positions. For example, the complete part number for an 8-position header with solder tails (C dimension .120 [3.05)] would be
5-146304-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05]) would be
7-146306-6. This part numbering system applies only to this page.
Board Retention
using Swaged Tails
(All Header Sizes)
104
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Breakaway and Retention
Headers-Unshrouded
A
.100*
[2.54]
B
.025
[0.64]
T
yp.
.090
[2.29]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder tail, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder tail, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over
.000050 [0.00127] nickel
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.025 [0.64] Square
Straight Posts
.045
[1.14] Ref.
.192
[4.88]
.100
[2.54]
.100
[2.54]
ERef.
(Contact Area)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Headers with Solder Tails
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
Headers with Board Retention Tails
.090±.002
[2.29±0.05]
.030±.002
[0.76±0.05]
.035±.003
[0.89±0.08] Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02] Dia. Typ.
C
D
( of Hole Pattern)
C
L
.110
[2.79]
( of Stencil Pattern)
C
L
A
.100*
[2.54]
B
.025
[0.64]
Typ.
.090
[2.29]
.075
[1.91] Ref. .192
[4.88]
.100
[2.54]
ERef.
(Contact Area)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
.150±.002
[3.81±0.05]
.030±.002
[0.76±0.05]
.040±.003
[1.02±0.08] Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02] Dia. Typ.
C
D
( of Hole Pattern)
C
L
.170
[4.32]
( of Stencil Pattern)
C
L
C = .090 [2.29] C = .120 [3.05] C = .125 [3.18]
Header No. of Dimensions D = .230 [5.84] D = .230 [5.84] D = .318 [8.08]
Style Pos. AB
E = .185 [4.70] E = .185 [4.70] E = .200 [5.08]
Post Plating/Part Nos. Post Plating/Part Nos. Post Plating/Part Nos.
Plating A Plating B Plating C Plating A Plating B Plating C Plating A Plating B Plating C
With — 5-146261-1 5-146260-1 5-146258-1 5-146257-1 5-146256-1 5-146254-1 5-146253-1 5-146252-1 5-146250-1
Solder Tails 2.084 [2.13]
(See Notes 80 9-146261-0 9-146260-0 9-146258-0 9-146257-0 9-146256-0 9-146254-0 9-146253-0 9-146252-0 9-146250-0
1 and 2.) 3.984 [101.19] 3.900 [99.06]
With Board — 5-146273-1 5-146272-1 5-146270-1 5-146269-1 5-146268-1 5-146266-1 5-146265-1 5-146264-1 5-146262-1
Retention Tails
2.084 [2.13]
(See Note 2.) 80 9-146273-0 9-146272-0 9-146270-0 9-146269-0 9-146268-0 9-146266-0 9-146265-0 9-146264-0 9-146262-0
3.984 [101.19] 3.900 [99.06]
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the
number of positions per row. For example, the complete part number for a 16-position header with solder tails (C dimension .090 [2.29], post plating A) would be 5-146261-8.
The complete part number for a 40-position header with board retention tails (C dimension .120 [3.05], post plating B) would be 7-146268-0. This part numbering system
applies only to this page.
105
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Breakaway and Retention
Headers-Unshrouded
.025 [0.64] Square
Right-Angle Posts A
D
ERef.
(Contact
Area)
.100
[2.54]
B
.238
[6.05]
.042
[1.07]
(2 Plc.) .090
[2.29]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
Posts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder tail,
with entire post underplated .000050
[0.00127] nickel
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.100
[2.54] Typ.
.140
[3.56]
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Headers with Solder Tails
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
Headers with Board Retention Tails
.045
[1.14]
Ref.
.090±.002
[2.29±0.05] .030±.002
[0.76±0.05]
.035±.003
[0.89±0.08] Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02] Dia. Typ.
D
.090
[2.29]
.140
[3.56]
ERef.
(Contact
Area)
A
B
.238
[6.05]
.042
[1.07]
(2 Plc.)
.100*
[2.54]
.075
[1.91]
Typ.
.030±.002
[0.76±0.05]
.040±.003
[1.02±0.08] Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02] Dia. Typ.
.150±.002
[3.81±0.05]
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
C = .120 [3.05] C = .110 [2.79]
Header No. of Dimensions D = .230 [5.84] D = .318 [8.08]
Style Pos. AB
E = .185 [4.70] E = .200 [5.08]
Part Nos. Part Nos.
With — 5-146308-1 5-146309-1
Solder Tails 2.084 [2.13]
(See Notes 80 9-146308-0 9-146309-0
1 and 2.) 3.984 [101.19] 3.900 [99.06]
With Board — 5-146310-1 5-146311-1
Retention Tails
2.084 [2.13]
(See Note 2.) 80 9-146310-0 9-146311-0
3.984 [101.19] 3.900 [99.06]
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to
the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16-
position header with solder tails (C dimension .120 [3.05)] would be 5-146308-8. The complete part number for a 40-position header
with board retention tails (C dimension .120 [3.05]) would be 7-146310-0. This part numbering system applies only to this page.
Board Retention
using Swaged Tails
(All Header Sizes)
.100
[2.54]
.100*
[2.54]
.100
[2.54]
.110
[2.79]
( of Stencil Pattern)
C
L
( of Hole Pattern)
C
L
.100
[2.54]
.100
[2.54]
( of
Hole
Pattern)
C
L
.170
[4.32]
( of Stencil Pattern)
C
L
.100
[2.54]
C
C
106
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
5
AMPMODU Reeled Breakaway Headers
Reeled Breakaway Headers
TE now offers AMPMODU
reeled breakaway headers,
which are used for board-
to-board interconnections,
on a continuous reel. The
reeled breakaway headers
are an economy version of
the standard breakaway
headers, and continue to
provide the same high
quality standards that
TE is known for in the
connector industry.
Reeled breakaway headers
provide the flexibility to cut
the headers to many
different lengths, while only
having to stock one part
number. As a result, the
amount of part numbers that
need to be purchased and
stored can be greatly
reduced.
Reeled breakaway headers
can be purchased in single
and double rows with tin,
5 Au, 15 Au, and 30 Au
duplex plating. The lower
applied cost also offers
.230" and .318" mating
lengths. (See standard
breakaway-to-reeled header
conversion chart for vertical
headers on the reverse side
of this sheet)
Potential industries include:
computer peripherals,
telecommunications
equipment, consumer,
automotive, medical and
test equipment.
Tooling available from:
Robo-Pak, Inc.
814 Lakeshore Drive
East Bethel, MN 55902
A pin retention and pin
removal tooling option is
also available in addition to
cutting.
Features of Breakaway
Headers
■Design and inventory
versatility — headers can
easily be made into a variety
of sizes
■High Temperature
Compatible
■Reduced part number base
■Reduced inventory burden
Applications
■Desktops & workstations
■Set-top boxes
■Televisions
■Automotive instrument
panels & radios
■Medical and test equipment
Benefits
■Off the shelf availability
■Various header length
capability using the same
reel
■Reduction of inventory costs
■Economy version of the
standard breakaway headers
AMPMODU Interconnection System
107
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU Reeled Breakaway Headers (Continued)
Note: All part numbers are RoHS compliant.
Reeled Breakaway Headers
Standard Breakaway-to-Reeled Header Conversion Chart (Vertical)
Double Row Headers Single Row Headers
Existing Make From Existing Make From Existing Make From Existing Make From
TE P/N Reeled P/N TE P/N Reeled P/N TE P/N Reeled P/N TE P/N Reeled P/N
Plating Mate: .318 Mate: .318 Mate: .230 Mate: .230 Mate: .318 Mate: .318 Mate: .230 Mate: .230
Options Tail: .125 Tail: .115 Tail: .120 Tail: .110 Tail: .125 Tail: .115 Tail: .120 Tail: .110
103322 103328 103321 103327
Tin 5-146853-1 5-146851-1 5-146852-1 5-146850-1
146250 146254 146274 146278
102973 103186 102972 103185
15 Au Duplex 5-146861-1 5-146859-1 5-146860-1 5-146858-1
146252 146256 146276 146280
102977 103240 102976 103239
30 Au Duplex 5-146871-1 5-146869-1 5-146870-1 5-146868-1
146253 146257 146277 146281
Note: Reeled Headers are a functional substitute for standard breakaways, however there are visual differences (i.e. housing appearance and bow due to reeling requirement).
.100
[2.54]
.100
[2.54]
.100±.003
[2.54±0.08]
.025±.002
[0.64±0.05] .110±.015(1)
[2.79±0.38]
.046±.003
[1.17±0.08]
.230(1)
[5.84]
.185 [4.70]
(Contact Area)
.025±.001
[0.64±0.03] Typ.
.192
[4.88]
3.900
[99.06]
.100
[2.54]
.100±.003
[2.54±0.08]
.025±.002
[0.64±0.05] .110±.015(1)
[2.79±0.38]
.046±.003
[1.17±0.08]
.230(1)
[5.84]
.185 [4.70]
(Contact Area)
.025±.001
[0.64±0.03] T
yp.
.092
[2.34]
3.900
[99.06]
(1) See table for other mate and tail lengths.
Single Row
Double Row
108
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Breakaway Surface Mount Headers, .100 x .100 [2.54 x 2.54] Centerline
Product Facts
■Surface Mount Leads
■Contact Material:
phosphor bronze
■High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vapor-
phase reflow
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
■Choice of gold duplex or tin
plated posts
■Posts coplanar within .006
[0.15]
■Tape and reel packaging
available in addition to
single tube packaging.
Contact TE.
■Pick-and-place cap avail-
able for vacuum placement.
Contact TE.
An extension of the
AMPMODU Breakaway
Header product family are
the surface mount, vertical
breakaway headers. The
AMPMODU Surface Mount
breakaway headers
(Unshrouded) are available
in single- and double-row
vertical configurations with
mating lengths of .230 [5.84]
and .320 [8.13]. Posts are
offered with a choice of
either .000030 [.0007] gold
duplex or tin plating.
Current packaging is in a
single tube but tape and
reel is available for
automatic pick-and-place.
We also can provide a pick-
and-place cap for vacuum
placement if required.
R
R
Surface Mount
Breakaway Headers
109
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Surface Mount
Breakaway Headers
Breakaway Surface Mount Headers—Unshrouded
Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Post
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel entire post
Related Product Data
Mateable Receptacle —
Refer to Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C = .230 [5.84] C = .320 [8.13]
No. of D = .185 [4.70] D = .200 [5.08]
Pos.
Dimensions
Post Plating/Part Nos. Post Plating/Part Nos.
AB
Plating A Plating B Plating A Plating B
3.284 [7.21] .200 [5.08] 5-146128-1 5-146132-1 5-146129-1 5-146133-1
4.384 [9.75] .300 [7.62] 5-146128-2 5-146132-2 5-146129-2 5-146133-2
5.484 [12.29] .400 [10.16] 5-146128-3 5-146132-3 5-146129-3 5-146133-3
6.584 [14.83] .500 [12.70] 5-146128-4 5-146132-4 5-146129-4 5-146133-4
7.684 [17.37] .600 [15.24] 5-146128-5 5-146132-5 5-146129-5 5-146133-5
8.784 [19.91] .700 [17.78] 5-146128-6 5-146132-6 5-146129-6 5-146133-6
9.884 [22.45] .800 [20.32] 5-146128-7 5-146132-7 5-146129-7 5-146133-7
10 .984 [24.99] .900 [22.86] 5-146128-8 5-146132-8 5-146129-8 5-146133-8
11 1.084 [27.53] 1.000 [25.40] 5-146128-9 5-146132-9 5-146129-9 5-146133-9
12 1.184 [30.07] 1.100 [27.94] 6-146128-0 6-146132-0 6-146129-0 6-146133-0
13 1.284 [32.61] 1.200 [30.48] 6-146128-1 6-146132-1 6-146129-1 6-146133-1
14 1.384 [35.15] 1.300 [33.02] 6-146128-2 6-146132-2 6-146129-2 6-146133-2
15 1.484 [37.69] 1.400 [35.56] 6-146128-3 6-146132-3 6-146129-3 6-146133-3
A
C
DRef.
(Contact Area)
B
.092
[2.34]
.042
[1.07]
Typ.
.025
[0.63]
.105
[2.67]
.245
[6.22]
.050±.003
[1.27±0.08]
.090
[2.29]
.050
[1.27]
.192
[4.88]
.100
[2.54] Typ.
.100
[2.54] Typ.
Recommended Etched Circuit Layout
(Using .008 [0.20] thick stencil)
.140±.003
[3.56±0.08]
110
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Surface Mount
Breakaway Headers
Breakaway Surface Mount Headers—Unshrouded
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel entire post
Related Product Data
Mateable Receptacles —
Refer to Mating Post Selection Guide —
page 90
C = .230 [5.84] C = .320 [8.13]
No. of D = .185 [4.70] D = .200 [5.08]
Pos.
Dimensions
Post Plating/Part Nos. Post Plating/Part Nos.
AB
Plating A Plating B Plating A Plating B
4.184 [4.67] .100 [2.54] 5-146130-1 5-146134-1 5-146131-1 5-146135-1
6.284 [7.21] .200 [5.08] 5-146130-2 5-146134-2 5-146131-2 1-146135-6
8.384 [9.75] .300 [7.62] 5-146130-3 5-146134-3 5-146131-3 5-146135-3
10 .484 [12.29] .400 [10.16] 5-146130-4 1-146134-7 5-146131-4 5-146135-4
12 .584 [14.83] .500 [12.70] 5-146130-5 5-146134-5 5-146131-5 5-146135-5
14 .684 [17.37] .600 [15.24] 5-146130-6 5-146134-6 5-146131-6 5-146135-6
16 .784 [19.91] .700 [17.78] 5-146130-7 1-146134-9 5-146131-7 5-146135-7
18 .884 [22.45] .800 [20.32] 5-146130-8 5-146134-8 5-146131-8 5-146135-8
20 .984 [24.99] .900 [22.86] 5-146130-9 5-146134-9 5-146131-9 5-146135-9
22 1.084 [27.53] 1.000 [25.40] 6-146130-0 6-146134-0 6-146131-0 6-146135-0
24 1.184 [30.07] 1.100 [27.94] 6-146130-1 6-146134-1 6-146131-1 6-146135-1
26 1.284 [32.61] 1.200 [30.48] 6-146130-2 6-146134-2 6-146131-2 6-146135-2
28 1.384 [35.15] 1.300 [33.02] 6-146130-3 6-146134-3 6-146131-3 6-146135-3
30 1.484 [37.69] 1.400 [35.56] 6-146130-4 2-146134-1 6-146131-4 6-146135-4
A
C
DRef.
(Contact Area)
B
B
.042
[1.07]
Typ.
.025
[0.64]
.100
[2.54]
.090
[2.29]
.345
[8.76]
.205
[5.21]
.065
[1.65]
.140±.003
[3.56±0.08]
.050±.003
[1.27±0.08]
.063
[1.60]
.050
[1.27]
.292
[7.42]
.192
[4.88]
.100
[2.54] Typ.
.100
[2.54] Typ.
Recommended Etched Circuit Layout
(Using .008 [0.20] thick stencil)
111
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Unshrouded Stacking Headers—
Breakaway
Unshrouded Stacking Headers—Breakaway
.100 x .100 [2.54 x 2.54] Centerline
Product Facts
■Available in single and
double row
■Parallel PC board stacking
with numerous stack
heights available
■Drawn wire posts allow
4 side mateability
■May eliminate the need for
additional board spacers
■Can be used in
conjunction with bottom
entry receptacles
■Gold or tin plated
■Up to 1.430 [36.32] overall
post length
■Retention and surface
mount features available
upon request
■Other header sizes can be
made upon request
■Tape and reel packaging
available. Contact TE.
■Pick-and-place cap avail-
able for vacuum placement.
Contact TE.
112
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
112
Note: All part numbers are RoHS compliant.
Unshrouded Stacking Headers—
Breakaway
Unshrouded Stacking Headers — Breakaway,
Single-Row, .100 [2.54] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating — As noted in chart:
Tin — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127]
nickel entire post
15Au — .000015 [0.00038] gold over
.000050 [0.00127] nickel entire post
Related Product Data
Mateable Receptacles —
Refer to the Mating Post Selection
Guide — page 88
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
Retention and surface mount fea-
tures available upon request.
Other header sizes can be made
upon request.
.025 [0.64] Square
Straight Posts
.092
[2.34]
B
.025±.001
[0.64±0.03] T
yp.
Recommended PC Board Hole Layout
Base ABCD
B End D End
Number Stack Tail Post Mating Plating Plating
(see note) Height Length Length Length
146455 .200 [5.08] .130 [3.30] .440 [11.17] .110 [2.79] TIN TIN
146456 .250 [6.35] .080 [2.03] .440 [11.17] .110 [2.79] TIN TIN
146457 .250 [6.35] .114 [2.89] .474 [12.03] .110 [2.79] TIN TIN
146458 .300 [7.62] .123 [3.12] .533 [13.53] .110 [2.79] TIN TIN
146459 .400 [10.16] .107 [2.71] .617 [15.67] .110 [2.79] TIN TIN
146460 .450 [11.43] .057 [1.45] .617 [15.67] .110 [2.79] TIN TIN
146461 .500 [12.70] .129 [3.27] .739 [18.77] .110 [2.79] TIN TIN
146462 .300 [7.62] .109 [2.77] .739 [18.77] .330 [8.38] TIN 15 AU
146463 .600 [15.24] .107 [2.71] .817 [20.75] .110 [2.79] TIN TIN
146464 .400 [10.16] .087 [2.20] .817 [20.75] .330 [8.38] TIN 15 AU
146465 .700 [17.78] .120 [3.05] .930 [23.62] .110 [2.79] TIN TIN
146466 .500 [12.70] .100 [2.54] .930 [23.62] .330 [8.38] TIN 15 AU
146467 .270 [6.86] .330 [8.38] .930 [23.62] .330 [8.38] 15 AU 15 AU
146468 .800 [20.32] .120 [3.05] 1.030 [26.16] .110 [2.79] TIN TIN
146469 .600 [15.24] .100 [2.54] 1.030 [26.16] .330 [8.38] TIN 15 AU
146470 .370 [9.39] .330 [8.38] 1.030 [26.16] .330 [8.38] 15 AU 15 AU
146471 .900 [22.86] .120 [3.05] 1.130 [28.70] .110 [2.79] TIN TIN
146472 .700 [17.78] .100 [2.54] 1.130 [28.70] .330 [8.38] TIN 15 AU
146473 .470 [11.39] .330 [8.38] 1.130 [28.70] .330 [8.38] 15 AU 15 AU
146474 1.000 [25.40] .120 [3.05] 1.230 [31.24] .110 [2.79] TIN TIN
146475 .800 [20.32] .100 [2.54] 1.230 [31.24] .330 [8.38] TIN 15 AU
146476 .570 [14.47] .330 [8.38] 1.230 [31.24] .330 [8.38] 15 AU 15 AU
146477 1.100 [27.94] .120 [3.05] 1.330 [33.78] .110 [2.79] TIN TIN
146478 .900 [22.68] .100 [2.54] 1.330 [33.78] .330 [8.38] TIN 15 AU
146479 .670 [17.01] .330 [8.38] 1.330 [33.78] .330 [8.38] 15 AU 15 AU
146480 1.200 [30.48] .120 [3.05] 1.430 [36.32] .110 [2.79] TIN TIN
146481 1.000 [25.40] .100 [2.54] 1.430 [36.32] .330 [8.38] TIN 15 AU
146482 .770 [19.55] .330 [8.38] 1.430 [36.32] .330 [8.38] 15 AU 15 AU
D
.100±.003
[2.54±0.08] T
yp.
Tolerance Non-Cumulative
.042±.008
[1.07±0.20]
4 Places
.090±.003
[2.29±0.08]
Header Size
No. of Pos. x .100 [2.54]
.046±.003
[1.17±0.08]
AC
.035±.003
[0.89±0.08] Dia. Typ.
*Note: Headers are available in sizes
1 thru 40. When ordering, add the
prefix and/or suffix (dash) numbers
plus 5- -0 to the base part number
that corresponds with the number of
positions per row. For example, the
complete part number for an 8-position
header is 5-146455-8. The complete
part number for a 16-position of the
same series would be 6-146455-6.
113
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Unshrouded Stacking Headers—
Breakaway
Unshrouded Stacking Headers — Breakaway,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating — As noted in chart:
Tin — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127]
nickel entire post
15Au — .000015 [0.00038] gold over
.000050 [0.00127] nickel entire post
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
Retention and surface mount
features available upon request.
Other header sizes can be made
upon request.
.025 [0.64] Square
Straight Posts
Recommended PC Board Hole Layout
Base ABCD
B End D End
Number Stack Tail Post Mating Plating Plating
(see note) Height Length Length Length
146483 .200 [5.08] .130 [3.30] .440 [11.17] .110 [2.79] TIN TIN
146484 .250 [6.35] .080 [2.03] .440 [11.17] .110 [2.79] TIN TIN
146485 .250 [6.35] .114 [2.89] .474 [12.03] .110 [2.79] TIN TIN
146486 .300 [7.62] .123 [3.12] .533 [13.53] .110 [2.79] TIN TIN
146487 .400 [10.16] .107 [2.71] .617 [15.67] .110 [2.79] TIN TIN
146488 .450 [11.43] .057 [1.45] .617 [15.67] .110 [2.79] TIN TIN
146489 .500 [12.70] .129 [3.27] .739 [18.77] .110 [2.79] TIN TIN
146490 .300 [7.62] .109 [2.77] .739 [18.77] .330 [8.38] TIN 15 AU
146491 .600 [15.24] .107 [2.71] .817 [20.75] .110 [2.79] TIN TIN
146492 .400 [10.16] .087 [2.20] .817 [20.75] .330 [8.38] TIN 15 AU
146493 .700 [17.78] .120 [3.05] .930 [23.62] .110 [2.79] TIN TIN
146494 .500 [12.70] .100 [2.54] .930 [23.62] .330 [8.38] TIN 15 AU
146495 .270 [6.86] .330 [8.38] .930 [23.62] .330 [8.38] 15 AU 15 AU
146496 .800 [20.32] .120 [3.05] 1.030 [26.16] .110 [2.79] TIN TIN
146497 .600 [15.24] .100 [2.54] 1.030 [26.16] .330 [8.38] TIN 15 AU
146498 .370 [9.39] .330 [8.38] 1.030 [26.16] .330 [8.38] 15 AU 15 AU
146499 .900 [22.86] .120 [3.05] 1.130 [28.70] .110 [2.79] TIN TIN
146500 .700 [17.78] .100 [2.54] 1.130 [28.70] .330 [8.38] TIN 15 AU
146501 .470 [11.93] .330 [8.38] 1.130 [28.70] .330 [8.38] 15 AU 15 AU
146502 1.000 [25.40] .120 [3.05] 1.230 [31.24] .110 [2.79] TIN TIN
146503 .800 [20.32] .100 [2.54] 1.230 [31.24] .330 [8.38] TIN 15 AU
146504 .570 [14.74] .330 [8.38] 1.230 [31.24] .330 [8.38] 15 AU 15 AU
146505 1.100 [27.94] .120 [3.05] 1.330 [33.78] .110 [2.79] TIN TIN
146506 .900 [22.68] .100 [2.54] 1.330 [33.78] .330 [8.38] TIN 15 AU
146507 .670 [17.01] .330 [8.38] 1.330 [33.78] .330 [8.38] 15 AU 15 AU
146508 1.200 [30.48] .120 [3.05] 1.430 [36.32] .110 [2.79] TIN TIN
146509 1.000 [25.40] .100 [2.54] 1.430 [36.32] .330 [8.38] TIN 15 AU
146510 .770 [19.55] .330 [8.38] 1.430 [36.32] .330 [8.38] 15 AU 15 AU
.192
[4.88]
.100
[2.54]
B
.025±.001
[0.64±0.03] Typ.
D
.100±.003
[2.54±0.08] Typ.
Tolerance Non-Cumulative
.042±.008
[1.07±0.20]
4 Places
.090±.003
[2.29±0.08]
.100±.003
[2.54±0.08]
.046±.003
[1.17±0.08]
AC
.035±.003
[0.89±0.08] Dia. Typ.
Header Size
No. of Pos. x .100 [2.54]
*Note: Headers are available in sizes
2 thru 80. When ordering, add the
prefix and/or suffix (dash) numbers
plus 5- -0 to the base part number
that corresponds with the number of
positions per row. For example, the
complete part number for a 16-position
header is 5-146283-8. The complete
part number for a 32-position of the
same series would be 6-146283-6.
114
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded
Product Facts
■Available in several styles—
right-angle with three- and
four-sided pin protection,
and straight post with pin
protection and mounting ears
■Post retention feature
available
■Can be used for feed-to and
feed-thru applications
■Housings are black
thermoplastic, flame
retardant 94V-0 rated
■Contacts are copper alloy
■Available in gold duplex,
gold over nickel and tin over
nickel platings
■Headers with .066 [1.68]
and .150 [3.81] end dimen-
sions are available in select
sizes up to 60 positions
■Can be select loaded,
consult TE
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Electrical
Insulation Resistance — 5,000
megohms minimum initial
Dielectric Withstanding Voltage —
750 RMS at sea level
Environmental
Operating Temperature —
-65°C to +105°C (black thermoplastic
housings)
Current — 3 amperes maximum
per contact
R
R
115
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, Single-Row,
.100 [2.54] Centerline
No. of Dimensions Post Plating/Part Nos.
Pos. AB CPlating A Plating B Plating C
3.420 [10.67] .340 [8.64] .200 [5.08] 5-103414-1 8-102202-4 5-103080-1
4.520 [13.21] .440 [11.18] .300 [7.62] 5-103414-2 5-102202-1 5-103080-2
5.620 [15.75] .540 [13.72] .400 [10.16] 5-103414-3 5-102202-2 5-103080-3
6.720 [18.29] .640 [16.26] .500 [12.70] 5-103414-4 5-102202-3 5-103080-4
7.820 [20.83] .740 [18.80] .600 [15.24] 5-103414-5 5-102202-4 5-103080-5
8.920 [23.37] .840 [21.34] .700 [17.78] 5-103414-6 5-102202-5 5-103080-6
91.020 [25.91] .940 [23.88] .800 [20.32] 5-103414-7 5-102202-6 5-103080-7
10 1.120 [28.45] 1.040 [26.42] .900 [22.86] 5-103414-8 5-102202-7 5-103080-8
11 1.220 [30.99] 1.140 [28.96] 1.000 [25.40] 5-103414-9 5-102202-8 5-103080-9
12 1.320 [33.53] 1.240 [31.50] 1.100 [27.94] 6-103414-0 5-102202-9 6-103080-0
13 1.420 [36.07] 1.340 [34.04] 1.200 [30.48] 6-103414-1 6-102202-0 6-103080-1
14 1.520 [38.61] 1.440 [36.58] 1.300 [33.02] 6-103414-2 6-102202-1 6-103080-2
15 1.620 [41.15] 1.540 [39.12] 1.400 [35.56] 6-103414-3 6-102202-2 6-103080-3
16 1.720 [43.69] 1.640 [41.66] 1.500 [38.10] 6-103414-4 6-102202-3 6-103080-4
17 1.820 [46.23] 1.740 [44.20] 1.600 [40.64] 6-103414-5 6-102202-4 6-103080-5
18 1.920 [48.77] 1.840 [46.74] 1.700 [43.18] 6-103414-6 6-102202-5 6-103080-6
19 2.020 [51.31] 1.940 [49.28] 1.800 [45.72] 6-103414-7 6-102202-6 6-103080-7
20 2.120 [53.85] 2.040 [51.82] 1.900 [48.26] 6-103414-8 6-102202-7 6-103080-8
21 2.220 [56.39] 2.140 [54.36] 2.000 [50.80] 6-103414-9 6-102202-8 6-103080-9
22 2.320 [58.93] 2.240 [56.90] 2.100 [53.34] 7-103414-0 6-102202-9 7-103080-0
23 2.420 [61.47] 2.340 [59.44] 2.200 [55.88] 7-103414-1 7-102202-0 7-103080-1
24 2.520 [64.01] 2.440 [61.98] 2.300 [58.42] 7-103414-2 7-102202-1 7-103080-2
25 2.620 [66.55] 2.540 [64.52] 2.400 [60.96] 7-103414-3 7-102202-2 7-103080-3
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508] tin
on solder area, with entire post under-
plated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508] tin
on solder area, with entire post under-
plated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 215
AMPMODU MTE Receptacles —
pages 228, 229, 234
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.100*
[2.54]
T
yp.
.035±.003
[0.89±0.08] Dia. Typ.
B
.549
[13.94]
.110
[2.79]
T
yp.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Straight Post (with Standoffs)
A
C
.214
[5.44]
.100
[2.54] Typ.
.134
[3.40]
.013
[0.33]
(Standoffs)
.070
[1.78]
Typ. .040
[1.02]
Typ.
.219
[5.56]
.200
[5.08] Ref.
(Contact Area)
.130
[3.30]
.240
[6.10]
.330
[8.38]
116
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
No. of Dimensions Post Plating/Part Nos.
Pos. ABCPlating A Plating B Plating C
3.420 [10.67] .340 [8.64] .200 [5.08] 5-103361-1 8-102203-4 5-102523-1
4.520 [13.21] .440 [11.18] .300 [7.62] 5-103361-2 5-102203-1 5-102523-2
5.620 [15.75] .540 [13.72] .400 [10.16] 5-103361-3 5-102203-2 5-102523-3
6.720 [18.29] .640 [16.26] .500 [12.70] 5-103361-4 5-102203-3 5-102523-4
7.820 [20.83] .740 [18.80] .600 [15.24] 5-103361-5 5-102203-4 5-102523-5
8.920 [23.37] .840 [21.34] .700 [17.78] 5-103361-6 5-102203-5 5-102523-6
91.020 [25.91] .940 [23.88] .800 [20.32] 5-103361-7 5-102203-6 5-102523-7
10 1.120 [28.45] 1.040 [26.42] .900 [22.86] 5-103361-8 5-102203-7 5-102523-8
11 1.220 [30.99] 1.140 [28.96] 1.000 [25.40] 5-103361-9 5-102203-8 5-102523-9
12 1.320 [33.53] 1.240 [31.50] 1.100 [27.94] 6-103361-0 5-102203-9 6-102523-0
13 1.420 [36.07] 1.340 [34.04] 1.200 [30.48] 6-103361-1 6-102203-0 6-102523-1
14 1.520 [38.61] 1.440 [36.58] 1.300 [33.02] 6-103361-2 6-102203-1 6-102523-2
15 1.620 [41.15] 1.540 [39.12] 1.400 [35.56] 6-103361-3 6-102203-2 6-102523-3
16 1.720 [43.69] 1.640 [41.66] 1.500 [38.10] 6-103361-4 6-102203-3 6-102523-4
17 1.820 [46.23] 1.740 [44.20] 1.600 [40.64] 6-103361-5 6-102203-4 6-102523-5
18 1.920 [48.77] 1.840 [46.74] 1.700 [43.18] 6-103361-6 6-102203-5 6-102523-6
19 2.020 [51.31] 1.940 [49.28] 1.800 [45.72] 6-103361-7 6-102203-6 6-102523-7
20 2.120 [53.85] 2.040 [51.82] 1.900 [48.26] 6-103361-8 6-102203-7 6-102523-8
21 2.220 [56.39] 2.140 [54.36] 2.000 [50.80] 6-103361-9 6-102203-8 6-102523-9
22 2.320 [58.93] 2.240 [56.90] 2.100 [53.34] 7-103361-0 6-102203-9 7-102523-0
23 2.420 [61.47] 2.340 [59.44] 2.200 [55.88] 7-103361-1 7-102203-0 7-102523-1
24 2.520 [64.01] 2.440 [61.98] 2.300 [58.42] 7-103361-2 7-102203-1 7-102523-2
25 2.620 [66.55] 2.540 [64.52] 2.400 [60.96] 7-103361-3 7-102203-2 7-102523-3
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 215
AMPMODU MTE Receptacles —
pages 228, 229, 234
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.100*
[2.54]
Typ.
.035±.003
[0.89±0.08] Dia.
B
.549
[13.94]
.110
[2.79]
.330
[8.38]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Right-Angle Post
(with Standoffs)
A
C
.214
[5.44]
.100
[2.54] Typ.
.134
[3.40]
.013
[0.33]
(Standoffs)
.070
[1.78]
T
yp.
.040
[1.02]
Typ.
.219
[5.56]
.200
[5.08] Ref.
(Contact Area)
.151
[3.84]
.240
[6.10]
Standard Profile Headers—Shrouded, Single-Row,
.100 [2.54] Centerline (Continued)
117
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .066 [1.68]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors —
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 216-219
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.100*
[2.54]
.035±.003
[0.89±0.08] Dia. Typ.
A
.240
[6.10]
Typ.
.090
[2.29]
.080
[2.03]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Straight Post (with
Detent Windows)
B
C
.400
[10.16]
.100
[2.54] T
yp.
.066
[1.68]
(2 Plc.) .125
[3.18]
.200
[5.08] Ref.
(Contact Area)
.318
[8.08]
D
E
.090
[2.29]
(2 Plc.)
.100
[2.54]
.040
[1.02]
(3 Plc.)
.100*
[2.54] Typ.
.440
[11.18]
.280
[7.11]
No. of Dimensions Post Plating/Part Nos.
Pos. AB C D EPlating A Plating B Plating C
6.412 [10.46] .332 [8.43] .200 [5.08] .106 [2.69] — 5-103168-1 5-102618-1 8-87589-6
8.512 [13.00] .432 [10.97] .300 [7.62] .106 [2.69] — 5-103168-2 5-102618-2 8-87589-5
10 .612 [15.54] .532 [13.51] .400 [10.16] .206 [5.23] — 5-103168-3 5-102618-3 5-87589-1
12 .712 [18.08] .632 [16.05] .500 [12.70] .206 [5.23] — 5-103168-4 5-102618-4 5-87589-2
14 .812 [20.62] .732 [18.59] .600 [15.24] .306 [7.77] — 5-103168-5 5-102618-5 5-87589-3
16 .912 [23.16] .832 [21.13] .700 [17.78] .306 [7.77] — 5-103168-6 5-102618-6 5-87589-4
18 1.012 [25.70 .932 [23.67] .800 [20.32] .406 [10.31] — 5-103168-7 5-102618-7 5-87589-5
20 1.112 [28.24] 1.032 [26.21] .900 [22.86] .106 [2.69] .806 [20.47] 5-103168-8 5-102618-8 5-87589-6
22 1.212 [30.78] 1.132 [28.75] 1.000 [25.40] .106 [2.69] .906 [23.01] 5-103168-9 5-102618-9 5-87589-7
24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] .106 [2.69] 1.006 [25.55] 6-103168-0 6-102618-0 5-87589-8
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09] 6-103168-1 6-102618-1 5-87589-9
28 1.512 [38.40] 1.432 [36.37] 1.300 [33.02] .106 [2.69] 1.206 [30.63] 6-103168-2 6-102618-2 6-87589-0
30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17] 6-103168-3 6-102618-3 6-87589-1
118
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .066 [1.68]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of Dimensions Post Plating/Part Nos.
Positions ABCDEPlating A Plating B Plating C
32 1.712 [43.48] 1.632 [41.45] 1.500 [38.10] .106 [2.69] 1.406 [35.71] 6-103168-4 6-102618-4 6-87589-2
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25] 6-103168-5 6-102618-5 6-87589-3
361.912 [48.56] 1.832 [46.53] 1.700 [43.18] .106 [2.69] 1.606 [40.79] 6-103168-6 6-102618-6 6-87589-4
382.012 [51.10] 1.932 [49.07] 1.800 [45.72] .106 [2.69] 1.706 [43.33] 6-103168-7 6-102618-7 6-87589-5
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87] 6-103168-8 6-102618-8 6-87589-6
422.212 [56.18] 2.132 [54.15] 2.000 [50.80] .106 [2.69] 1.906 [48.41] 6-103168-9 6-102618-9 6-87589-7
442.312 [58.72] 2.232 [56.69] 2.100 [53.34] .106 [2.69] 2.006 [50.95] 7-103168-0 7-102618-0 6-87589-8
46 2.412 [61.26] 2.332 [59.23] 2.200 [55.88]
.
106 [2.69] 2.106 [53.49] 7-103168-1 7-102618-1 6-87589-9
48 2.512 [63.80] 2.432 [61.77] 2.300 [58.42] .106 [2.69] 2.206 [56.03] 7-103168-2 7-102618-2 7-87589-0
502.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57] 7-103168-3 7-102618-3 7-87589-1
52 2.712 [68.88] 2.632 [66.85] 2.500 [63.50] .106 [2.69] 2.406 [61.11] 7-103168-4 7-102618-4 7-87589-2
54 2.812 [71.42] 2.732 [69.39] 2.600 [66.04] .106 [2.69] 2.506 [63.65] 7-103168-5 7-102618-5 7-87589-3
562.912 [73.96] 2.832 [71.93] 2.700 [68.58] .106 [2.69] 2.606 [66.19] 7-103168-6 7-102618-6 7-87589-4
583.012 [76.50] 2.932 [74.47] 2.800 [71.12] .106 [2.69] 2.706 [68.73] 7-103168-7 7-102618-7 7-87589-5
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27] 7-103168-8 7-102618-8 7-87589-6
62 3.212 [81.58] 3.132 [79.55] 3.000 [76.20] .106 [2.69] 2.906 [73.81] 7-103168-9 7-102618-9 7-87589-7
643.312 [84.12] 3.232 [82.09] 3.100 [78.74] .106 [2.69] 3.006 [76.35] 8-103168-0 8-102618-0 7-87589-8
66 3.412 [86.66] 3.332 [84.63] 3.200 [81.28] .106 [2.69] 3.106 [78.89] 8-103168-1 8-102618-1 7-87589-9
68 3.512 [89.20] 3.432 [87.17] 3.300 [83.82] .106 [2.69] 3.206 [81.43] 8-103168-2 8-102618-2 8-87589-0
70 3.612 [91.74] 3.532 [89.71] 3.400 [86.36] .106 [2.69] 3.306 [83.97] 8-103168-3 8-102618-3 8-87589-1
72 3.712 [94.28] 3.632 [92.25] 3.500 [88.90] .106 [2.69] 3.406 [86.51] 8-103168-4 8-102618-4 8-87589-2
74 3.812 [96.82] 3.732 [94.79] 3.600 [91.44] .106 [2.69] 3.506 [89.05] 8-103168-5 8-102618-5 8-87589-3
119
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.100*
[2.54]
.035±.003
[0.89±0.08] Dia. Typ.
A
.240
[6.10] Typ.
.090
[2.29]
.080
[2.03]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Straight Post (with
Detent Windows)
B
.400
[10.16]
.100
[2.54] Typ.
.150
[3.81]
(2 Plc.) .125
[3.18]
.200
[5.08] Ref.
(Contact Area)
.318
[8.08]
D
E
.090
[2.29]
(2 Plc.)
.100
[2.54]
.040
[1.02]
(3 Plc.)
.100*
[2.54] Typ.
.440
[11.18]
C
.280
[7.11]
No. of Dimensions Post Plating/Part Nos.
Pos. AB CDEPlating A Plating B Plating C
6.580 [14.73] .500 [12.70] .200 [5.08] .190 [4.83] — 5-103169-1 5-102619-1 8-87587-3
8.680 [17.27] .600 [15.24] .300 [7.62] .190 [4.83] — 5-103169-2 5-102619-2 8-87587-4
10 .780 [19.81] .700 [17.78] .400 [10.16] .290 [7.37] — 5-103169-3 5-102619-3 5-87587-1
12 .880 [22.35] .800 [20.32] .500 [12.70] .290 [7.37] — 5-103169-4 5-102619-4 5-87587-2
14 .980 [24.89] .900 [22.86] .600 [15.24] .390 [9.91] — 5-103169-5 5-102619-5 5-87587-3
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] .390 [9.91] — 5-103169-6 5-102619-6 5-87587-4
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] .490 [12.45] — 5-103169-7 5-102619-7 5-87587-5
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] .190 [4.83] .890 [22.61] 5-103169-8 5-102619-8 5-87587-6
22 1.380 [35.05] 1.300 [33.02] 1.000 [25.40] .190 [4.83] .990 [25.15] 5-103169-9 5-102619-9 5-87587-7
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 6-103169-0 6-102619-0 5-87587-8
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 6-103169-1 6-102619-1 5-87587-9
28 1.680 [42.67] 1.600 [40.64] 1.300 [33.02] .190 [4.83] 1.290 [32.77] 6-103169-2 6-102619-2 6-87587-0
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 6-103169-3 6-102619-3 6-87587-1
120
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of Dimensions Post Plating/Part Nos.
Pos. ABCDEPlating A Plating B Plating C
321.880 [47.75] 1.800 [45.72] 1.500 [38.10] .190 [4.83] 1.490 [37.85] 6-103169-4 6-102619-4 6-87587-2
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] .190 [4.83] 1.590 [40.39] 6-103169-5 6-102619-5 6-87587-3
362.080 [52.83] 2.000 [50.80] 1.700 [43.18] .190 [4.83] 1.690 [42.93] 6-103169-6 6-102619-6 6-87587-4
382.180 [55.37] 2.100 [53.34] 1.800 [45.72] .190 [4.83] 1.790 [45.47] 6-103169-7 6-102619-7 6-87587-5
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] .190 [4.83] 1.890 [48.01] 6-103169-8 6-102619-8 6-87587-6
42 2.380 [60.45] 2.300 [58.42] 2.000 [50.80] .190 [4.83] 1.990 [50.55] 6-103169-9 6-102619-9 6-87587-7
442.480 [62.99] 2.400 [60.96] 2.100 [53.34] .190 [4.83] 2.090 [53.09] 7-103169-0 7-102619-0 6-87587-8
462.580 [65.53] 2.500 [63.50] 2.200 [55.88] .190 [4.83] 2.190 [55.63] 7-103169-1 7-102619-1 6-87587-9
48 2.680 [68.07] 2.600 [66.04] 2.300 [58.42] .190 [4.83] 2.290 [58.17] 7-103169-2 7-102619-2 7-87587-0
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] .190 [4.83] 2.390 [60.71] 7-103169-3 7-102619-3 7-87587-1
522.880 [73.15] 2.800 [71.12] 2.500 [63.50] .190 [4.83] 2.490 [63.25] 7-103169-4 7-102619-4 7-87587-2
54 2.980 [75.69] 2.900 [73.66] 2.600 [66.04] .190 [4.83] 2.590 [65.79] 7-103169-5 7-102619-5 7-87587-3
56 3.080 [78.23] 3.000 [76.20] 2.700 [68.58] .190 [4.83] 2.690 [68.33] 7-103169-6 7-102619-6 7-87587-4
583.180 [80.77] 3.100 [78.74] 2.800 [71.12] .190 [4.83] 2.790 [70.87] 7-103169-7 7-102619-7 7-87587-5
603.280 [83.31] 3.200 [81.28] 2.900 [73.66] .190 [4.83] 2.890 [73.41] 7-103169-8 7-102619-8 7-87587-6
62 3.380 [85.85] 3.300 [83.82] 3.000 [76.20] .190 [4.83] 2.990 [75.95] 7-103169-9 7-102619-9 7-87587-7
64 3.480 [88.39] 3.400 [86.36] 3.100 [78.74] .190 [4.83] 3.090 [78.49] 8-103169-0 8-102619-0 7-87587-8
663.580 [90.93] 3.500 [88.90] 3.200 [81.28] .190 [4.83] 3.190 [81.03] 8-103169-1 8-102619-1 7-87587-9
68 3.680 [93.47] 3.600 [91.44] 3.300 [83.82] .190 [4.83] 3.290 [83.57] 8-103169-2 8-102619-2 8-87587-0
70 3.780 [96.01] 3.700 [93.98] 3.400 [86.36] .190 [4.83] 3.390 [86.11] 8-103169-3 8-102619-3 8-87587-1
723.880 [98.55] 3.800 [96.52] 3.500 [88.90] .190 [4.83] 3.490 [88.65] 8-103169-4 8-102619-4 8-87587-2
121
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, duplex
plated .000015 [0.00038] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder area,
with entire post underplated .000050
[0.00127] nickel
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.100*
[2.54]
.040±.003
[1.02±0.08] Dia. Typ.
A
.090
[2.29]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Straight Post (with
Plastic Holddowns) B
.400
[10.16]
.100
[2.54] Typ.
.150
[3.81]
(2 Plc.) .125
[3.18]
.200
[5.08] Ref.
(Contact Area)
.318
[8.08]
.090
[2.29]
(2 Plc.)
.100
[2.54]
.040
[1.02]
(3 Plc.)
.100*
[2.54] Typ.
.440
[11.18]
C
.050
[1.27] (2 Plc.)
.140
[3.56]
(2 Plc.)
.093+.004
.093-.000
2.36+0.10
2.36-.000
.015
[.020]
0.38
[0.51]
[]
[]
Dia. Typ.
.280
[7.11]
No. of Dimensions Part Nos.
Pos. ABC
Plating A
6.580 [14.73] .500 [12.70] .200 [5.08] 5-104317-1
10 .780 [19.81] .700 [17.78] .400 [10.16] 5-104317-2
12 .880 [22.35] .800 [20.32] .500 [12.70] 5-104317-3
14 .980 [24.89] .900 [22.86] .600 [15.24] 5-104317-4
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] 6-104317-6
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] 5-104317-5
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 5-104317-6
22 1.380 [35.05] 1.300 [33.02] 1.000 [25.40] 5-104317-7
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 5-104317-8
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 5-104317-9
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 6-104317-0
32 1.880 [47.75] 1.800 [45.72] 1.500 [38.10] 6-104317-1
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 6-104317-8
36 2.080 [52.83] 2.000 [50.80] 1.700 [43.18] 6-104317-7
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 6-104317-2
42 2.380 [60.45] 2.300 [58.42] 2.000 [50.80] 6-104317-5
48 2.680 [68.07] 2.600 [66.04] 2.300 [58.42] 6-104317-3
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 6-104317-4
.180
[4.57]
122
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 216-219
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.100*
[2.54]
.035±.003
[0.89±0.08] Dia. Typ.
A.157
[3.99]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Right-Angle Post
(with Detent Windows)
B
.400
[10.16]
.100
[2.54] T
yp.
.066
[1.68]
(2 Plc.)
.135
[3.43]
.200
[5.08] Ref.
(Contact Area)
.318
[8.08]
.090
[2.29]
(2 Plc.)
.100
[2.54]
.040
[1.02]
(3 Plc.)
.100*
[2.54] Typ.
.489
[12.42]
C
.080
[2.03]
E
.240
[6.10]
Typ.
D
.639
[16.23]
.013
[0.33]
(Standoffs)
.100
[2.54]
.280
[7.11]
No. of Dimensions Post Plating/Part Nos.
Pos. ABCDEPlating A Plating B Plating C
6.412 [10.46] .332 [8.43] .200 [5.08] .106 [2.69] — 5-103166-1 5-102617-1 8-87579-5
8.512 [13.00] .432 [10.97] .300 [7.62] .106 [2.69] — 5-103166-2 5-102617-2 5-87579-1
10 .612 [15.54] .532 [13.51] .400 [10.16] .206 [5.23] — 5-103166-3 5-102617-3 5-87579-2
12 .712 [18.08] .632 [16.05] .500 [12.70] .206 [5.23] — 5-103166-4 5-102617-4 5-87579-3
14 .812 [20.62] .732 [18.59] .600 [15.24] .306 [7.77] — 5-103166-5 5-102617-5 5-87579-4
16 .912 [23.16] .832 [21.13] .700 [17.78] .306 [7.77] — 5-103166-6 5-102617-6 5-87579-5
18 1.012 [25.70] .932 [23.67] .800 [20.32] .406 [10.31] — 5-103166-7 5-102617-7 5-87579-6
20 1.112 [28.24] 1.032 [26.21] .900 [22.86] .106 [2.69] .806 [20.47] 5-103166-8 5-102617-8 5-87579-7
22 1.212 [30.78] 1.132 [28.75] 1.000 [25.40] .106 [2.69] .906 [23.01] 5-103166-9 5-102617-9 5-87579-8
24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] .106 [2.69] 1.006 [25.55] 6-103166-0 6-102617-0 5-87579-9
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09] 6-103166-1 6-102617-1 6-87579-0
28 1.512 [38.40] 1.432 [36.37] 1.300 [33.02] .106 [2.69] 1.206 [30.63] 6-103166-2 6-102617-2 6-87579-1
30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17] 6-103166-3 6-102617-3 6-87579-2
123
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of Dimensions Post Plating/Part Nos.
Pos. ABCDEPlating A Plating B Plating C
321.712 [43.48] 1.632 [41.45] 1.500 [38.10] .106 [2.69] 1.406 [35.71] 6-103166-4 6-102617-4 6-87579-3
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25] 6-103166-5 6-102617-5 6-87579-4
36 1.912 [48.56] 1.832 [46.53] 1.700 [43.18] .106 [2.69] 1.606 [40.79] 6-103166-6 6-102617-6 6-87579-5
382.012 [51.10] 1.932 [49.07] 1.800 [45.72] .106 [2.69] 1.706 [43.33] 6-103166-7 6-102617-7 6-87579-6
402.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87] 6-103166-8 6-102617-8 6-87579-7
42 2.212 [56.18] 2.132 [54.15] 2.000 [50.80] .106 [2.69] 1.906 [48.41] 6-103166-9 6-102617-9 6-87579-8
44 2.312 [58.72] 2.232 [56.69] 2.100 [53.34] .106 [2.69] 2.006 [50.95] 7-103166-0 7-102617-0 6-87579-9
462.412 [61.26] 2.332 [59.23] 2.200 [55.88] .106 [2.69] 2.106 [53.49] 7-103166-1 7-102617-1 7-87579-0
48 2.512 [63.80] 2.432 [61.77] 2.300 [58.42] .106 [2.69] 2.206 [56.03] 7-103166-2 7-102617-2 7-87579-1
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57] 7-103166-3 7-102617-3 7-87579-2
522.712 [68.88] 2.632 [66.85] 2.500 [63.50] .106 [2.69] 2.406 [61.11] 7-103166-4 7-102617-4 7-87579-3
542.812 [71.42] 2.732 [69.39] 2.600 [66.04] .106 [2.69] 2.506 [63.65] 7-103166-5 7-102617-5 7-87579-4
56 2.912 [73.96] 2.832 [71.93] 2.700 [68.58] .106 [2.69] 2.606 [66.19] 7-103166-6 7-102617-6 7-87579-5
58 3.012 [76.50] 2.932 [74.47] 2.800 [71.12] .106 [2.69] 2.706 [68.73] 7-103166-7 7-102617-7 7-87579-6
603.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27] 7-103166-8 7-102617-8 7-87579-7
62 3.212 [81.58] 3.132 [79.55] 3.000 [76.20] .106 [2.69] 2.906 [73.81] 7-103166-9 7-102617-9 7-87579-8
64 3.312 [84.12] 3.232 [82.09] 3.100 [78.74] .106 [2.69] 3.006 [76.35] 8-103166-0 8-102617-0 7-87579-9
663.412 [86.66] 3.332 [84.63] 3.200 [81.28] .106 [2.69] 3.106 [78.89] 8-103166-1 8-102617-1 8-87579-0
683.512 [89.20] 3.432 [87.17] 3.300 [83.82] .106 [2.69] 3.206 [81.43] 8-103166-2 8-102617-2 8-87579-1
70 3.612 [91.74] 3.532 [89.71] 3.400 [86.36] .106 [2.69] 3.306 [83.97] 8-103166-3 8-102617-3 8-87579-2
72 3.712 [94.28] 3.632 [92.25] 3.500 [88.90] .106 [2.69] 3.406 [86.51] 8-103166-4 8-102617-4 8-87579-3
74 3.812 [96.82] 3.732 [94.79] 3.600 [91.44] .106 [2.69] 3.506 [89.05] 8-103166-5 8-102617-5 8-87579-4
124
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.100*
[2.54]
.035±.003
[0.89±0.08] Dia. Typ.
A
.157
[3.99]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Right-Angle Post
(with Detent Windows)
B
.400
[10.16]
.100
[2.54] T
yp.
.150
[3.81]
(2 Plc.)
.135
[3.43]
.200
[5.08] Ref.
(Contact Area)
.318
[8.08]
.090
[2.29]
(2 Plc.)
.100
[2.54]
.040
[1.02]
(3 Plc.)
.100*
[2.54] Typ.
.489
[12.42]
C
.080
[2.03]
E.240
[6.10]
Typ.
D
.639
[16.23]
.013
[0.33]
(Standoffs)
.100
[2.54]
.289
[7.34]
.280
[7.11]
No. of Dimensions Post Plating/Part Nos.
Pos. ABCDEPlating A Plating B Plating C
8.680 [17.27] .600 [15.24] .300 [7.62] .190 [4.83] — 5-103167-1 5-102570-2 5-87577-1
10 .780 [19.81] .700 [17.78] .400 [10.16] .290 [7.37] — 5-103167-2 5-102570-3 5-87577-2
12 .880 [22.35] .800 [20.32] .500 [12.70] .290 [7.37] — 5-103167-3 5-102570-4 5-87577-3
14 .980 [24.89] .900 [22.86] .600 [15.24] .390 [9.91] — 5-103167-4 5-102570-5 5-87577-4
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] .390 [9.91] — 5-103167-5 5-102570-6 5-87577-5
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] .490 [12.45] — 5-103167-6 5-102570-7 5-87577-6
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] .190 [4.83] .890 [22.61] 5-103167-7 5-102570-8 5-87577-7
22 1.380 [35.05] 1.300 [33.02] 1.000 [25.40] .190 [4.83] .990 [25.15] 5-103167-8 5-102570-9 5-87577-8
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 5-103167-9 6-102570-0 5-87577-9
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 6-103167-0 6-102570-1 6-87577-0
28 1.680 [42.67] 1.600 [40.64] 1.300 [33.02] .190 [4.83] 1.290 [32.77] 6-103167-1 6-102570-2 6-87577-1
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 6-103167-2 6-102570-3 6-87577-2
125
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of Dimensions Post Plating/Part Nos.
Pos. ABCDEPlating A Plating B Plating C
321.880 [47.75] 1.800 [45.72] 1.500 [38.10] .190 [4.83] 1.490 [37.85] 6-103167-3 6-102570-4 6-87577-3
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] .190 [4.83] 1.590 [40.39] 6-103167-4 6-102570-5 6-87577-4
36 2.080 [52.83] 2.000 [50.80] 1.700 [43.18]
.
190 [4.83] 1.690 [42.93] 6-103167-5 6-102570-6 6-87577-5
382.180 [55.37] 2.100 [53.34] 1.800 [45.72] .190 [4.83] 1.790 [45.47] 6-103167-6 6-102570-7 6-87577-6
402.280 [57.91] 2.200 [55.88] 1.900 [48.26] .190 [4.83] 1.890 [48.01] 6-103167-7 5-102570-1 6-87577-7
42 2.380 [60.45] 2.300 [58.42] 2.000 [50.80] .190 [4.83] 1.990 [50.55] 6-103167-8 6-102570-8 6-87577-8
44 2.480 [62.99] 2.400 [60.96] 2.100 [53.34] .190 [4.83] 2.090 [53.09] 6-103167-9 6-102570-9 6-87577-9
462.580 [65.53] 2.500 [63.50] 2.200 [55.88] .190 [4.83] 2.190 [55.63] 7-103167-0 7-102570-0 7-87577-0
48 2.680 [68.07] 2.600 [66.04] 2.300 [58.42] .190 [4.83] 2.290 [58.17] 7-103167-1 7-102570-1 7-87577-1
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] .190 [4.83] 2.390 [60.71] 7-103167-2 7-102570-2 7-87577-2
522.880 [73.15] 2.800 [71.12] 2.500 [63.50] .190 [4.83] 2.490 [63.25] 7-103167-3 7-102570-3 7-87577-3
542.980 [75.69] 2.900 [73.66] 2.600 [66.04] .190 [4.83] 2.590 [65.79] 7-103167-4 7-102570-4 7-87577-4
56 3.080 [78.23] 3.000 [76.20] 2.700 [68.58] .190 [4.83] 2.690 [68.33] 7-103167-5 7-102570-5 7-87577-5
58 3.180 [80.77] 3.100 [78.74] 2.800 [71.12]
.
190 [4.83] 2.790 [70.87] 7-103167-6 7-102570-6 7-87577-6
603.280 [83.31] 3.200 [81.28] 2.900 [73.66] .190 [4.83] 2.890 [73.41] 7-103167-7 7-102570-7 7-87577-7
62 3.380 [85.85] 3.300 [83.82] 3.000 [76.20] .190 [4.83] 2.990 [75.95] 7-103167-8 7-102570-8 7-87577-8
64 3.480 [88.39] 3.400 [86.36] 3.100 [78.74] .190 [4.83] 3.090 [78.49] 7-103167-9 7-102570-9 7-87577-9
663.580 [90.93] 3.500 [88.90] 3.200 [81.28] .190 [4.83] 3.190 [81.03] 8-103167-0 8-102570-0 8-87577-0
683.680 [93.47] 3.600 [91.44] 3.300 [83.82] .190 [4.83] 3.290 [83.57] 8-103167-1 8-102570-1 8-87577-1
70 3.780 [96.01] 3.700 [93.98] 3.400 [86.36] .190 [4.83] 3.390 [86.11] 8-103167-2 8-102570-2 8-87577-2
72 3.880 [98.55] 3.800 [96.52] 3.500 [88.90] .190 [4.83] 3.490 [88.65] 8-103167-3 8-102570-3 8-87577-3
126
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.100
[2.54]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 216, 217
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.035±.003
[0.89±0.08] Dia. Typ.
A.157
[3.99]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Right-Angle Post
(with Pin Protection
on 3 Sides)
B
.066
[1.68]
(2 Plc.)
.100
[2.54] Typ.
.040
[1.02]
(2 Plc.)
.125
[3.18]
.090
[2.29]
(2 Plc.)
.100
[2.54]
.100*
[2.54]
.489
[12.42]
C
.361
[9.17]
.639
[16.23]
.200
[5.08] Ref.
(Contact Area)
.318
[8.08]
.100
[2.54]
.100*
[2.54]
.289
[7.34]
.280
[7.11]
No. of Dimensions Post Plating/Part Nos.
Pos. ABCPlating A Plating B Plating C
6.412 [10.46] .332 [8.43] .200 [5.08]
5-
103164-1
5-
102055-2 8-87572-5
8.512 [13.00] .432 [10.97] .300 [7.62]
5-
103164-2
5-
102055-3
5-
87572-1
10 .612 [15.54] .532 [13.51] .400 [10.16]
5-
103164-3
5-
102055-4
5-
87572-2
12 .712 [18.08] .632 [16.05] .500 [12.70]
5-
103164-4
5-
102055-5
5-
87572-3
14 .812 [20.62] .732 [18.59] .600 [15.24]
5-
103164-5
5-
102055-6
5-
87572-4
16 .912 [23.16] .832 [21.13] .700 [17.78]
5-
103164-6
5-
102055-7
5-
87572-5
18 1.012 [25.70] .932 [23.67] .800 [20.32]
5-
103164-7
5-
102055-8
5-
87572-6
20 1.112 [28.24] 1.032 [26.21] .900 [22.86]
5-
103164-8
5-
102055-1
5-
87572-7
24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] 6-103164-0 6-102055-0 —
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] 6-103164-1 — 6-87572-0
30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] 6-103164-3 6-102055-3 —
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] 6-103164-5 6-102055-5 6-87572-4
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] 6-103164-8 6-102055-8 6-87572-7
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] 7-103164-3 7-102055-3 7-87572-2
52 2.712 [68.88] 2.632 [66.85] 2.500 [63.50] 7-103164-4 ——
54 2.812 [71.42] 2.732 [69.36] 2.600 [66.04] — 7-102055-5 —
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] 7-103164-8 7-102055-8 7-87572-7
127
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
No. of Dimensions Post Plating/Part Nos.
Pos. ABCPlating A Plating B Plating C
10 .780 [19.81] .700 [17.78] .400 [10.16]
5-
103165-1
5-
102620-1
5-
87568-1
12 .880 [22.35] .800 [20.32] .500 [12.70]
5-
103165-2
5-
102620-2
5-
87568-2
14 .980 [24.89] .900 [22.86] .600 [15.24]
5-
103165-3
5-
102620-3
5-
87568-3
16 1.080 [27.43] 1.000 [25.40] .700 [17.78]
5-
103165-4
5-
102620-4
5-
87568-4
18 1.180 [29.97] 1.100 [27.94] .800 [20.32]
5-
103165-5
5-
102620-5
5-
87568-5
20 1.280 [32.51] 1.200 [30.48] .900 [22.86]
5-
103165-6
5-
102620-6
5-
87568-6
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94]
5-
103165-8
5-
102620-8 —
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48]
5-
103165-9
5-
102620-9
5-
87568-9
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 6-103165-1 6-102620-1 —
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 6-103165-3 6-102620-3 6-87568-3
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 6-103165-6 6-102620-6 6-87568-6
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 7-103165-1 7-102620-1 7-87568-1
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] 7-103165-6 7-102620-6 7-87568-6
.157
[3.99] .125
[3.18]
.200
[5.08] Ref.
(Contact Area) .318
[8.08]
.100
[2.54]
.280
[7.11]
.289
[7.34]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU Wire-Applied
Receptacles — pages 216, 217
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.035±.003
[0.89±0.08] Dia. Typ.
A
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Right-Angle Post
(with Pin Protection
on 3 Sides)
B
.150
[3.81]
(2 Plc.)
.100
[2.54] Typ.
.040
[1.02]
(2 Plc.)
.090
[2.29]
(2 Plc.)
.100
[2.54]
.100*
[2.54]
Typ.
.489
[12.42]
C
.361
[9.17]
.639
[16.23]
.100*
[2.54]
.361
[9.17]
128
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
No. of Dimensions Part Nos.
Pos. AB C
10 .780 [19.81] .700 [17.78] .400 [10.16]
5-
104319-7
12 .880 [22.35] .800 [20.32] .500 [12.70]
5-
104319-8
14 .980 [24.89] .900 [22.86] .600 [15.24]
5-
104319-5
16 1.080 [27.43] 1.000 [25.40] .700 [17.78]
5-
104319-1
20 1.280 [32.51] 1.200 [30.48] .900 [20.86]
5-
104319-2
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56]
5-
104319-3
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64]
5-
104319-6
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26]
5-
104319-4
48 2.680 [68.07] 2.600 [66.04] 2.300 [58.42]
5-
104319-9
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, duplex
plated .000015 [0.00038] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder area,
with entire post underplated .000050
[0.00127] nickel
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.040±.003
[1.02±0.08]Dia. Typ.
.451
[11.46]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Right-Angle Post
(with Plastic Holddowns)
B
.150
[3.81]
(2 Plc.) .100
[2.54] Typ.
.040
[1.02]
(2 Plc.)
.135
[3.43]
.090
[2.29]
(2 Plc.)
.489
[12.42]
C
.180
[4.57]
.200
[5.08] Ref.
(Contact Area)
.318
[8.08]
.100
[2.54]
.100*
[2.54]
.639
[16.23]
.015
[.020]
0.38
[0.51]
[]
.100
[2.54]
.050
[1.27] (2 Plc.)
A
.140
[3.56]
(2 Plc.)
.451
[11.46]
.093+.004
.09 -.000
2.36+0.10
2.36-.000
Dia.
(2 Plc.)
[]
(Standoffs)
.100
[2.54] T
yp.
.289
[7.34]
.280
[7.11]
.400
[10.16]
129
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU Wire-Applied
Receptacles — pages 216-219
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications. C
.035±.003
[0.89±0.08] Dia. Typ.
.318
[8.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
B
.150
[3.81]
T
yp.
.100
[2.54] Typ. .090
[2.29]
Typ.
.125
[3.18]
.090
[2.29]
D
.400
[10.16]
.200
[5.08] Ref.
(Contact Area)
.100*
[2.54]
.440
[11.18]
.100
[2.54]
E
.352
[8.94]
.080
[2.03]
Typ.
G
A
C
F
.220
[5.59]
Typ.
.352
[8.94]
T
yp.
.047
[1.19] (2 Plc.)
.050
[1.27] Typ.
.125
[3.18] Dia. Typ.
D
.062
[1.57]
T
yp.
R
.100*
[2.54] Typ.
.280
[7.11]
.090
[2.29]
.240
[6.10]
Typ.
No. of Dimensions Part Nos.
Pos. ABCDEF G
10 .780 [19.81] .700 [17.78] .400 [10.16] 1.104 [28.04] 1.304 [33.12] .290 [7.37] — 87474-1
14 .980 [24.89] .900 [22.86] .600 [15.24] 1.304 [33.12] 1.504 [38.20] .190 [4.83] — 87474-9
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 1.604 [40.74] 1.804 [45.82] .190 [4.83] .890 [22.61] 87474-2
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90] .190 [4.83] 1.090 [27.69] 1-87474-3
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44] .190 [4.83] 1.190 [30.23] 87474-3
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60] .190 [4.83] 1.590 [40.39] 87474-4
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22] .190 [4.83] 1.890 [48.01] 87474-6
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 3.104 [78.84] 3.304 [83.92] .190 [4.83] 2.390 [60.71] 87474-7
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62] .190 [4.83] 2.890 [73.41] 2-87474-6
130
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded Bulkhead Type; with .066 [1.68] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 216-219
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.330
[8.38]
Recommended Panel Cutout
**Both mating faces have same end dimension.
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
B
.047
[1.19]
T
yp.
.066**
[1.68] T
yp.
D
.400
[10.16]
No. of Dimensions Part Nos.
Pos. ABCDEFGH
10 .612 [15.54] .532 [13.51] .400 [10.16] 1.104 [28.04] 1.304 [33.12] .206 [5.23] — .632 [16.05] 87608-1
12 .712 [18.08] .632 [16.05] .500 [12.70] 1.204 [30.58] 1.404 [35.66] .206 [5.23] — .732 [18.59] 87608-2
20 1.112 [28.24] 1.032 [26.21] .900 [22.86] 1.604 [40.74] 1.804 [45.82] .106 [2.69] .806 [20.47] 1.132 [28.75] 87608-6
24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90] .106 [2.69] 1.006 [25.55] 1.332 [33.83] 87608-8
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44] .106 [2.69] 1.106 [28.09] 1.432 [36.37] 87608-9
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60] .106 [2.69] 1.506 [38.25] 1.832 [46.53] 1-87608-3
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22] .106 [2.69] 1.806 [45.87] 2.132 [54.15] 1-87608-6
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] 3.104 [78.84] 3.304 [83.92] .106 [2.69] 2.306 [58.57] 2.632 [66.85] 2-87608-1
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62] .106 [2.69] 2.806 [71.27] 3.132 [79.55] 2-87608-6
.880
[22.35]
.100
[2.54]
E
.080
[2.03]
Typ.
G
A
C
F
.220
[5.59] .318
[8.08]
.062
[1.57]
T
yp.
.130-.135
[3.30-3.43] Dia. Typ.
D ±.002
[±0.05]
.062
[1.57]
Thick Panel
G
.240
[6.10] Typ. F
.288
[7.32]
.530
[13.46]
.040
[1.02]
Typ.
R
.080
[2.03] T
yp.
.100
[2.54]T
yp.
.200
[5.08] Ref.
(Contact Area)
.090
[2.29]
T
yp.
.090
[2.29]
T
yp.
H ±.002
[±0.05]
.235±.002
[5.97±0.05]
.440±.002
[11.18±0.05]
.005
[0.13]
R Max.
(4 Corners)
.352
[8.94]
Typ.
.280
[7.11]
131
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded Bulkhead Type; with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.330
[8.38]
Recommended Panel Cutout
**Both mating faces have same end dimension.
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
B
.047
[1.19]
Typ.
.150**
[3.81] Typ.
D
.400
[10.16]
No. of Dimensions Part Nos.
Pos. ABCDEFGH
10 .780 [19.81] .700 [17.78] .400 [10.16] 1.104 [28.04] 1.304 [33.12] .290 [7.37] — .800 [20.32] 87605-1
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 1.604 [40.74] 1.804 [45.82] .190 [4.83] .890 [22.61] 1.300 [33.02] 87605-6
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90] .190 [4.83] 1.090 [27.69] 1.500 [38.10] 87605-8
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44] .190 [4.83] 1.190 [30.23] 1.600 [40.64] 87605-9
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 2.104 [53.44] 2.304 [58.52] .190 [4.83] 1.390 [35.31] 1.800 [45.72] 1-87605-1
32 1.880 [47.75] 1.800 [45.72] 1.500 [38.10] 2.204 [55.98] 2.404 [61.06] .190 [4.83] 1.490 [37.85] 1.900 [48.26] 1-87605-2
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60] .190 [4.83] 1.590 [40.39] 2.000 [50.80] 1-87605-3
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22] .190 [4.83] 1.890 [48.01] 2.300 [58.42] 1-87605-6
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 3.104 [78.84] 3.304 [83.92] .190 [4.83] 2.390 [60.71] 2.800 [71.12] 2-87605-1
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62] .190 [4.83] 2.890 [73.41] 3.300 [83.82] 2-87605-6
.880
[22.35]
.100
[2.54]
.080
[2.03]
Typ.
G
A
C
F
.220
[5.59] .318
[8.08]
.062
[1.57]
Typ.
.130-.135
[3.30-3.43] Dia. Typ.
.062
[1.57]
Thick Panel
G
.240
[6.10] T
yp. F
.288
[7.32]
.530
[13.46]
.040
[1.02]
Typ.
R
.080
[2.03] Typ.
.100
[2.54]Typ.
.200
[5.08] Ref.
(Contact Area)
.090
[2.29]
T
yp.
.090
[2.29]
T
yp.
.235±.002
[5.97±0.05]
.440±.002
[11.18±0.05]
.005
[0.13]
R Max.
(4 Corners)
.352
[8.94]
T
yp.
D ±.002
[±0.05]
H ±.002
[±0.05]
.280
[7.11]
132
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded Bulkhead Type; with .066/.150 [1.68/3.81]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Related Product Data
Mateable Connectors with
.066 [1.68] End Dimension —
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 216-219
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
Mateable Connectors with
.150 [3.81] End Dimension —
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.330
[8.38]
Recommended Panel Cutout
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears) .047
[1.19]
Typ.
.150
[3.81] T
yp.
D.880
[22.35]
.100
[2.54]
E
.080
[2.03]
Typ.
H
A
.220
[5.59]
.062
[1.57]
T
yp.
.130-.135
[3.30-3.43] Dia. Typ.
D±.002
[±0.05]
.062
[1.57]
Thick Panel
G
F
.400
[10.16]
.040
[1.02] T
yp.
R
.080
[2.03]
.090
[2.29]
T
yp.
M±.002
[±0.05]
.005
[0.13]
R Max.
(4 Corners)
.352
[8.94]
Typ.
.289
[7.34]
K
J
.240
[6.10]
Typ.
B
C
.318
[8.08]
.090
[2.29]
Typ.
.200
[5.08] Ref.
(Contact Area)
.280
[7.11]
.235±.002
[5.97±0.05]
.040
[1.02]
Typ.
.066
[1.68]
Typ.
.400
[10.16]
.220
[5.59]
.352
[8.94]
Typ.
D
E
.080
[2.03]
C
.047
[1.19]
Typ.
.062
[1.57]
Typ.
R
L
.440±.002
[11.18±0.05]
133
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
Standard Profile Headers—Shrouded Bulkhead Type; with .066/.150 [1.68/3.81]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline (Continued)
No. of Dimensions
Pos. AB CD E F
Part Nos.
10.780 [19.81] .700 [17.78] .400 [10.16] 1.104 [28.04] 1.304 [33.12] .290 [7.37] 87496-2
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 1.604 [40.74] 1.804 [45.82] .190 [4.83] 87496-7
241.480 [37.59] 1.400 [35.56] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90] .190 [4.83] 87496-9
261.580 [40.13] 1.500 [38.10] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44] .190 [4.83] 1-87496-0
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 2.104 [53.44] 2.304 [58.52] .190 [4.83] 1-87496-2
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60] .190 [4.83] 1-87496-4
402.280 [57.91] 2.200 [55.88] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22] .190 [4.83] 1-87496-7
502.780 [70.61] 2.700 [68.58] 2.400 [60.96] 3.304 [83.92] 3.304 [83.92] .190 [4.83] 87496-1
60 3.280 [83.31] 3.200 [81.38] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62] .190 [4.83] 2-87496-6
No. of Dimensions
Pos. GHJK L M
Part Nos.
10 — .206 [5.23] — .612 [15.54] .532 [13.51] .632 [16.05] 87496-2
20 .890 [22.61] .106 [2.69] .806 [20.47] 1.112 [28.24] 1.032 [26.21] 1.132 [28.75] 87496-7
24 1.090 [27.69] .106 [2.69] 1.006 [25.55] 1.312 [33.32] 1.232 [31.29] 1.332 [33.83] 87496-9
261.190 [30.23] .106 [2.69] 1.106 [28.09] 1.412 [35.86] 1.332 [33.83] 1.432 [36.37] 1-87496-0
30 1.390 [35.31] .106 [2.69] 1.306 [33.17] 1.612 [40.94] 1.532 [38.91] 1.632 [41.45] 1-87496-2
34 1.590 [40.39] .106 [2.69] 1.506 [38.25] 1.812 [46.02] 1.732 [43.99] 1.832 [46.53] 1-87496-4
40 1.890 [48.01] .106 [2.69] 1.806 [45.87] 2.112 [53.64] 2.032 [51.61] 2.132 [54.15] 1-87496-7
50 2.390 [60.71] .106 [2.69] 2.306 [58.57] 2.612 [66.34] 2.532 [64.31] 2.632 [66.85] 87496-1
60 2.890 [73.41] .106 [2.69] 2.806 [71.27] 3.112 [79.04] 3.032 [77.01] 3.132 [79.55] 2-87496-6
134
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Low Profile Headers,
Shrouded
AMP-LATCH Low Profile Headers––Shrouded
Product Facts
■Available in selected
positions 10 thru 60
■Flame retardant,
thermoplastic housings,
94V-0 rated
■Vertical and right-angle
versions available in double
row configurations
■Available in .025 [0.64]
square drawn wire posts
■Wash out clearance for flux
removal
■Mates with AMP-LATCH
Ribbon Cable Connectors
■Available with and without
eject latches
■Available with and without
kinked soldertails for PCB
retention
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Electrical
Insulation Resistance — 5,000
megohms minimum initial
Dielectric Withstanding Voltage —
1,000 V rms at sea level
Environmental
Operating Temperature —
-65°C to +105°C
Current — 1 ampere maximum
per contact
R
R
135
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Low Profile Headers,
Shrouded
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Material and Finish
Housing — Glass-filled nylon, black,
94V-0 rated
Posts — Copper alloy, plated as follows:
Plating A — Gold flash over .000030
[0.00076] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
Plating B — Gold flash over .000015
[0.00038] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
AMPMODU Board Mount
Receptacles — pages 179, 180
Short Point Wire-Applied
Connectors — page 224
.025 [0.64] Square
Straight Post .045
[1.14]
.165
[4.19]
.100
[2.54]
.075±.002
[1.91±0.05]
.025±.001
[0.64±0.03]
.360
[9.14]
.130
[3.30]
A
B
Typ.
(2 Plc.)
(2 Plc.)
.040
.035
[1.02]
0.89
.020
.015
[0.51]
0.38
.385
[9.78]
.185±.010
[4.70±0.25]
.185
[4.70]
.100
[2.54]
.120±.015
[3.05±0.38]
.200
[5.08]
.015
.010
[0.38]
0.25
.240
[6.10]
Typ.
Recommended PC Board Hole Layout
For Manual Insertion
.100±.003*
[2.54±0.08]
.040±.003
[1.02±0.08]
.100±.003*
[2.54±0.08]
Typ.
Dia. Typ.
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
(Contact
Area)
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
10 .800 [20.32] .400 [10.16] 5103309-1 5103308-1
14 1.000 [25.40] .600 [15.24] 5103309-2 5103308-2
16 1.100 [27.94] .700 [17.78] 5103309-3 5103308-3
20 1.300 [33.02] .900 [22.86] 5103309-5 5103308-5
24 1.400 [35.56] 1.100 [27.94] — 1-5103308-3
26 1.600 [40.64] 1.200 [30.48] 5103309-6 5103308-6
34 2.000 [50.80] 1.600 [40.64] 5103309-7 5103308-7
40 2.300 [58.42] 1.900 [48.26] 5103309-8 5103308-8
50 2.800 [71.12] 2.400 [60.96] 1-5103309-0 1-5103308-0
60 3.300 [83.82] 2.900 [73.66] — 1-5103308-2
136
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Low Profile Headers,
Shrouded
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Material and Finish
Housing — Glass-filled nylon, black,
94V-0 rated
Posts — Copper alloy, plated as follows:
Plating A — Gold flash over .000030
[0.00076] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
Plating B — Gold flash over .000015
[0.00038] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
Short Point Wire-Applied
Connectors — page 224
.025 [0.64] Square
Right-Angle Post
Recommended PC Board Hole Layout
For Manual Insertion
.100±.003*
[2.54±0.08] Typ.
Dia. Typ.
.100±.003*
[2.54±0.08] .035±.003
[0.89±0.08]
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
A
B
Typ.
T
yp.
(contact area)
.1975
[5.016]
.153+.008
-.005
3.88+.203
-.127
.135+.020
-.010
3.42+0.51
-0.25
.185
[4.69]
.045
[1.14]
.360
[9.14]
.010
[0.25]
.240
[6.09]
.200
[5.08]
.130
[3.30]
.025±.001
[.635±0.03]
.130
[3.30]
.185±.010
[4.69±0.25]
.075±.002
[1.90±0.05]
.165
[4.19]
.025±.001
[0.64±0.03]
.385
[9.77]
.100
[2.54]
Typ.
T
yp.
Typ.
(2 Plc.)
2 Plc.
•
Position No.1
Indicator
.100
[2.54]
.123
[3.12]
[]
[]
No. of Dimensions Post Plating/Part Nos.
Pos. ABPlating A Plating B
10 .800 [20.32] .400 [10.16] 5103311-1 5103310-1
14 1.000 [25.40] .600 [15.24] 5103311-2 5103310-2
16 1.100 [27.94] .700 [17.78] 5103311-3 5103310-3
20 1.300 [33.02] .900 [22.86] 5103311-5 5103310-5
26 1.600 [40.64] 1.200 [30.48] 5103311-6 5103310-6
34 2.000 [50.80] 1.600 [40.64] 5103311-7 5103310-7
40 2.300 [58.42] 1.900 [48.26] 5103311-8 5103310-8
50 2.800 [71.12] 2.400 [60.96] 1-5103311-0 1-5103310-0
60 3.300 [83.82] 2.900 [73.66] 1-5103311-2 —
137
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Low Profile Headers,
Shrouded
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline &
“Kinked” Soldertails for PCB Retention
No. of Dimensions Post Plating
Pos. AB
Part Nos.
10 .800 [20.32] .400 [10.16] 5104338-1
14 1.000 [25.40] .600 [15.24] 5104338-2
16 1.100 [27.94] .700 [17.78] 5104338-3
20 1.300 [33.02] .900 [22.86] 5104338-4
24 1.400 [35.56] 1.100 [27.94] 5104338-5
34 2.000 [50.80] 1.600 [40.64] 5104338-7
40 2.300 [58.42] 1.900 [48.26] 5104338-8
50 2.800 [71.12] 2.400 [60.96] 5104338-9
60 3.300 [83.82] 2.900 [73.66] 1-5104338-0
Material and Finish
Housing — Glass-filled PPA, black,
94V-0 rated
Posts — Copper alloy, plated with gold
flash over .000015 [0.00038] min.
palladium-nickel plate on the mating
surfaces, .000100 [0.00254] min. tin
plate on soldertails, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
AMPMODU Board Mount
Receptacles — pages 179, 180
Short Point Wire-Applied
Connectors — page 224
*Reflow solder process compatible
.025 [0.64] Square
Straight Post (with Board
Retention Feature)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.045
[1.14]
.165
[4.19]
.100
[2.54]
.075±.002
[1.91±0.05]
.025±.001
[0.64±0.03]
.365
[9.27]
.140
[3.56]
A
B
.153+.008
.153 -.005
3.88+0.20
.15 - 0.13
T
yp.
(2 Plc.)
(2 Plc.)
.040
.035
[1.02]
0.89
.020
.015
[0.51]
0.38
.385
[9.78]
.185±.010
[4.69±0.25]
.185
[4.69]
.100
[2.54]
.120±.015
[3.05±0.38]
.200
[5.08]
Recommended PC Board Hole Layout
For Manual Insertion
.100±.003*
[2.54±0.08]
.040±.003
[1.02±0.08]
.100±.003*
[2.54±0.08]
Typ.
Dia. Typ.
.025
.020
[0.64]
0.51
.240
[6.10]
[]
(Contact Area)
138
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Low Profile Headers,
Shrouded
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline &
“Kinked” Soldertails for PCB Retention (Continued)
No. of Dimensions Post Plating
Pos. AB Part Nos.
10 .800 [20.32] .400 [10.16] 5104340-1
14 1.000 [25.40] .600 [15.24] 5104340-2
16 1.100 [27.94] .700 [17.78] 5104340-3
20 1.300 [33.02] .900 [22.86] 5104340-4
40 2.300 [58.42] 1.900 [48.26] 5104340-8
50 2.800 [71.12] 2.400 [60.96] 5104340-9
Recommended PC Board Hole Layout
For Manual Insertion
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Material and Finish
Housing — Glass-filled PPA, black,
94V-0 rated
Posts — Copper alloy, plated with gold
flash over .000015 [0.00038] min.
palladium-nickel plate on the mating
surfaces, .000100 [0.00254] min. tin
plate on soldertails, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
Short Point Wire-Applied
Connectors — page 224
T
yp.
.165
[4.19] .025±.001
[0.64±0.03]
.385
[9.77]
A
B
Typ.
.153+.008
-.005
3.88+0.20
-0.13
.185
[4.69]
.045
[1.14]
.370
[9.40]
.140
[3.56]
.130
[3.30]
.185±.010
[4.69±0.25]
T
yp.
.200
[5.08]
.100
[2.54]
T
yp.
(2 Plc.)
2 Plc.
.025
.020
[0.64]
0.50
.125+.020
-.010
3.18+0.51
-0.25
Typ.
(contact area) .200
[5.08]
.240
[6.09]
.025±.001
[.635±0.03]
.123
[3.12]
.100
[2.54]
.075±.002
[1.90±0.05]
2 Plc.
•
Position No.1
Indicator
.100±.003*
[2.54±0.08]
.040±.003
[1.02±0.08]
.100±.003*
[2.54±0.08]
Typ.
Dia. Typ.
.025 [0.64] Square
Right-Angle Post (with
Board Retention Feature)
[]
[]
139
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Universal Ejection Style
Pin Headers
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centers
Note: All part numbers are RoHS
compliant.
Straight-Thru, 4-Sided
.025 [0.64] Sq. Posts
Material and Finish
Housing & Latches — Black
thermoplastic, 94V-0 rated
Contacts — Brass or phosphor bronze
(at TE’s option); Duplex .000030
[0.00076] gold on mating end, .000100
[0.00254] min. tin on termination end,
with entire contact underplated .000050
[0.00127] nickel
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts are
available for mounting
straight-thru pin headers of
pc boards. Typical applica-
tions and part nos. for
ordering this hardware are
presented below.
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
Pin Header
with Latches
Pin Header
without Latches
No. of Dimensions Part Number
Positions ABCD E (Without Latches)
.700 1.100 1.260 .860 .110 [2.79] 5102154-1
10 17.78 27.94 32.00 21.84 .155 [3.94] 5102156-1
.900 1.300 1.460 1.060 .110 [2.79] 5102154-2
14 22.86 33.02 37.08 26.92 .155 [3.94] 5102156-2
1.000 1.400 1.560 1.180 .110 [2.79] 5102154-3
16 25.40 35.56 39.62 29.46 .155 [3.94] 5102156-3
1.200 1.600 1.760 1.360 .110 [2.79] 5102154-4
20 30.48 40.64 44.70 34.54 .155 [3.94] 5102156-4
1.400 1.800 1.960 1.560 .110 [2.79] 5102154-5
24 35.56 45.72 49.78 39.62 .155 [3.94] 5102156-5
1.500 1.900 2.060 1.660 .110 [2.79] 5102154-6
26 38.10 48.26 52.32 42.16 .155 [3.94] 5102156-6
1.900 2.300 2.460 2.060 .110 [2.79] 5102154-8
34 48.26 58.42 62.48 52.32 .155 [3.94] 5102156-8
2.200 2.600 2.760 2.360 .110 [2.79] 5102154-9
40 55.88 66.04 70.10 59.94 .155 [3.94] 5102156-9
2.700 3.100 3.260 2.860 .110 [2.79] 1-5102154-0
50 68.58 78.74 82.80 72.64 .155 [3.94] 1-5102156-0
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),
located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.
.100
[2.54]
.150
[3.81]
.253
[6.43]
.336
[8.53]
.315
[8.00]
B
C
A
.100
[2.54]
.025
[0.64]
D
.096
[2.44] Dia.
2 Plc.
.106
[2.74]
.025
[0.64]
.549
[13.94]
.165
[4.19] .190
[4.83] .240
[6.10]
.107
[2.72] .289
[7.34] E
Solder Tail
T
yp.
.050
[1.27]
.150
[3.81]
.025
[0.64]
.195
[4.95]
•
Position No.1
Indicator
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
4-24
Self-Tapping
Screw
(2 Req‘d.)
2-56
Bolt & Nut
(2 Each Req‘d.)
Latch
(See Note at left.)
.256
[6.50]
Note: Used with Header (optional)
Latch (sold separately)
Part Number 1825851-1
140
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Universal Ejection Style
Pin Headers
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centers (Continued)
Right-Angle, 4-Sided
.025 [0.64] Sq. Posts
Pin Header
with Latches
Pin Header
without Latches
A
.100
[2.54]
.100
[2.54]
.100
[2.54]
.240
[6.10]
.038
[0.97]
.025
[0.64]
.025
[0.64]
.025
[0.64] Dia.
.253
[6.43]
.107
[2.72]
.150
[3.81]
.150
[3.81]
.315
[8.00]
.336
[8.53]
.050
[1.27]
.190
[4.83]
.108
[2.74]
.549
[13.94]
.195
[4.95]
.096
[2.44]
E
Typ.
Solder Tail
C
B
D
Pos. No. 1 Indicator
.289
[7.34]
.165
[4.19]
Note: All part numbers are RoHS
compliant.
Material and Finish
Housing & Latches — Black
thermoplastic, 94V-0 rated
Contacts — Brass or phosphor bronze
(at TE’s option); Duplex .000030
[0.00076] gold on mating end, .000100
[0.00254] min. tin on
termination end, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts are
available for mounting
straight-thru pin headers of
pc boards. Typical applica-
tions and part nos. for
ordering this hardware are
presented below.
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
No. of Dimensions Part Number
Positions ABCD E (Without Latches)
.700 1.100 1.260 .860 .110 [2.79] 5102160-1
10 17.78 27.94 32.00 21.84 .155 [3.94] 5102162-1
.900 1.300 1.460 1.060 .110 [2.79] 2-5102160-2*
14 22.86 33.02 37.08 26.92 .155 [3.94] 2-5102162-2*
1.000 1.400 1.560 1.180 .110 [2.79] 5102160-3
16 25.40 35.56 39.62 29.46 .155 [3.94] —
1.200 1.600 1.760 1.360 .110 [2.79] 5102160-4
20 30.48 40.64 44.70 34.54 .155 [3.94] —
1.400 1.800 1.960 1.560 .110 [2.79] 5102160-5
24 35.56 45.72 49.78 39.62 .155 [3.94] —
1.500 1.900 2.060 1.660 .110 [2.79] 5102160-6
26 38.10 48.26 52.32 42.16 .155 [3.94] 2-5102162-6*
1.900 2.300 2.460 2.060 .110 [2.79] 5102160-8
34 48.26 58.42 62.48 52.32 .155 [3.94] 5102162-8
2.200 2.600 2.760 2.360 .110 [2.79] 5102160-9
40 55.88 66.04 70.10 59.94 .155 [3.94] —
2.700 3.100 3.260 2.860 .110 [2.79] 1-5102160-0
50 68.58 78.74 82.80 72.64 .155 [3.94] 1- 5102162-0
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),
located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.
*Blue housing.
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
4-24
Self-Tapping
Screw
(2 Req‘d.)
2-56
Bolt & Nut
(2 Each Req‘d.)
Latch
(See Note at left.)
.256
[6.50]
Note: Used with Header (optional)
Latch (sold separately)
Part Number 1825851-1
141
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU Stacking Connectors—Shrouded,
.025 x .025 [0.64 x 0.64] Posts
Shrouded Stacking
Headers
Product Facts
■Parallel PC board stacking
without use of mother boards
■Provides space between
boards for interference-free
routing of wire-to-board
connections
■Two header heights
available: .785 [19.94] and
1.200 [30.48]
■Vertical mount headers are
fully shrouded
■Receptacle contacts have
dual cantilever beams with
built-in overstress protection
■.025 [0.64] sq. posts and
receptacle contacts on
double-row, .100 x .100
[2.54 x 2.54] centers
■Header posts and receptacle
contacts are phosphor
bronze, duplex plated
■Housings are made of
flame retardant, glass-filled
thermoplastic
AMPMODU stacking
connectors are a two-piece
interconnection system
designed for parallel
stacking printed circuit
boards, without the use of
mother boards.
Vertical mount headers and
receptacle assemblies
feature duplex plated posts
and receptacle contacts on
a double-row, .100 x .100
[2.54 x 2.54] grid. The .025
[ 0.64] sq. header posts are
more protected, and the
top-entry receptacle
contacts utilize the proven
AMPMODU receptacle
contact design; dual
cantilever beams with built-
in overstress protection.
Headers are available in
two heights: .785 [19.94]
and 1.200 [30.48]. This
allows the customer to
use the height of the header
to keep wire-to-board
connections up and
away from other board
components, particularly if
the components are densely
packaged around the
header.
142
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies, Double-Row Board Mounted
Note: All part numbers are RoHS compliant.
Shrouded Stacking
Headers
Vertical Mount, Top Entry,
High Profile, Selectively
Loaded (with Standoffs)
A
B
.100*
[2.54]
.050
[1.27]
.035±.003
[0.89±0.08] Dia.
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of Dimensions Receptacle
Assembly
Pos. AB
Part No.
48* 2.400 [60.96] 2.300 [58.42] 5-102766-1
(40 Active)
60* 3.000 [76.2] 2.900 [73.66] 5-102766-4
(52 Active)
*In addition to the active positions, each receptacle has four cavities on each
end that are not loaded with contacts. These empty cavities aid in aligning
the receptacle with header posts during mating.
Notes: 1. Part no. and date code stamped on housing where size permits.
Notes: 2.
These receptacle assemblies mate with headers of the same
size as the active positions listed above. Refer to pages 143 and
144.
.238
[6.05]
.100
[2.54]
.100*
[2.54]
.100
[2.54]
.320
[8.13]
.020
[0.51]
(Standoffs)
.025
[0.64]
.175
[4.45]
.100
[2.54] .115
[2.92]
Post Entry
Typ.
B
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
.000010 [0.000254] min. gold on mating
area, .000150-.000300 [0.00381-
0.00762] matte tin on solder area, with
entire contact underplated .000050-
.000100 [0.00127-0.00254] nickel
143
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Headers, Double-Row, .785 [19.94] Height
Note: All part numbers are RoHS compliant.
Shrouded Stacking
Headers
No. of Dimensions Header
Pos. AB CD
Part No.
40 2.720 [69.09] 2.400 [60.96] 1.900 [48.26] 2.430 [61.27] 5-102871-2
52 3.320 [84.33] 3.000 [76.2] 2.500 [63.5] 3.030 [76.96] 5-102871-1
Note: These headers mate with receptacle assemblies having the same number of active positions. See page 142.
A
.103
[2.62] Dia.
(at Surface)
B
.265
[6.73]
.025 x .025 [0.64 x 0.64]
Straight Post (with
Pin Protection)
.124
[3.15]
.100
[2.54]
C
.100*
[2.54]
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumu-
late within one connector pattern.
.100
[2.54] Typ.
.320
[8.13]
.090
[2.29]
.099
[2.51] Dia.
(at .340
[8.64] Depth)
.348
[8.84]
.250
[3.81]
.070
[1.78]
.380
[9.65]
Min.
.340
[8.64]
D
.025
[0.64]
Sq. Posts
.103
[2.62]
.785
[19.94]
.450
[11.43]
.275
[6.99]
.084
[2.13]
.268
[6.81]
.025
[0.64]
Sq. Posts
.100*
[2.54]
Typ.
.050±.003
[1.27±0.08]
C
B
.250±.003
[3.81±0.08] .043±.005
[1.09±0.13] .125
[3.18]
Dia.
Dia.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
.000015 [0.000381] min. gold on mating
area, .000100-.000200 [0.00254-
0.00508] matte tin on solder area, with
entire post underplated .000050
[0.00127] nickel
144
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Headers, Double-Row, 1.200 [30.48] Height
Note: All part numbers are RoHS compliant.
Shrouded Stacking
Headers
A
.077
[1.96] Dia.
(at Surface)
B
.265
[6.73]
.025 x .025 [0.64 x 0.64]
Straight Post (with
Pin Protection)
.124
[3.15]
.100
[2.54]
C
.100*
[2.54]
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumu-
late within one connector pattern.
.100
[2.54] T
yp.
.320
[8.13]
.090
[2.29]
.073
[1.85] Dia.
(at .340 [8.64]
Depth)
.348
[8.84]
.040
[1.02]
.350
[8.89]
Min.
.340
[8.64]
D
.025
[0.64]
Sq. Posts
.098
[2.49]
1.200
[30.48]
.865
[21.97]
.275
[6.99]
.084
[2.13]
.268
[6.81]
.025
[0.64]
Sq. Posts
.100*
[2.54]
Typ.
.050±.003
[1.27±0.08]
C
B
.250±.003
[3.81±0.08] .043±.005
[1.09±0.13] .125
[3.18]
Dia.
.250
[6.35]
.250
[6.35]
.060
[1.52]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
.000015 [0.000381] min. gold on mating
area, .000100-.000200 [0.00254-
0.00508] matte tin on solder area, with
entire post underplated .000050
[0.00127] nickel
No. of Dimensions Header
Pos. AB CD
Part No.
52 3.320 [84.33] 3.000 [76.2] 2.500 [63.5] 3.030 [76.96] 5-102826-1
Note: This header mates with receptacle assembly having the same number of active positions. See page 142.
145
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Headers—Shrouded and Unshrouded
ACTION PIN Headers
Product Facts
■Straight posted unshrouded
and shrouded versions
■.025 [0.64] square
ACTION PIN posts
■ACTION PIN posts make a
gas-tight, press-fit connec-
tion in plated-through holes
■Designed not to damage
plated-through holes
■Unshrouded headers
available in selected sizes
1 through 40 positions
(single-row) and 4 through
80 positions (double-row)
■Shrouded headers (double-
row) available in selected
sizes of 6 through 60
positions
■Flame retardant, black
thermoplastic housings,
94V-0 rated
■.100 [2.54] Centerline
spacing
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 16455
R
R
146
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Headers—Unshrouded, Single-Row,
.100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
ACTION PIN Headers,
Unshrouded
A
.200
[5.08] Ref.
(Contact Area)
B
.042
[1.07]
Typ.
.025 [0.64] Square
Straight Post
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
ACTION PIN Posts — pages 150, 151
Application Tooling — page 152
Technical Documents — page 276
See mating connector for applicable
product and application specifications
.250
[6.35]
.320
[8.13]
B
.100*
[2.54]
See page 168 for
hole dimensions Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.100
[2.54] Typ.
.092
[2.34]
.090
[2.29]
.050
[1.27]
Max.
Part Nos.
No. of Dimensions For .062 For .093-.125
Pos. AB [1.57] [.236-3.18]
Thick PC Boards Thick PC Boards
1.084 [2.13] —8-103336-5 8-102898-5
2.184 [4.67] .100 [2.54] 8-103336-4 8-102898-4
3.284 [7.21] .200 [5.08] 9-103336-0 9-102898-0
4.384 [9.75] .300 [7.62] 8-103336-6 8-102898-6
5.484 [12.29] .400 [10.16] 8-103336-8 8-102898-8
6.584 [14.83] .500 [12.70] 8-103336-7 8-102898-7
7.684 [17.37] .600 [15.24] 8-103336-9 8-102898-9
8.784 [19.91] .700 [17.78] 5-103336-1 5-102898-1
9.884 [22.45] .800 [20.32] 5-103336-2 5-102898-2
10 .984 [24.99] .900 [22.86] 5-103336-3 5-102898-3
11 1.084 [27.53] 1.000 [25.40] 5-103336-4 5-102898-4
12 1.184 [30.07] 1.100 [27.94] 5-103336-5 5-102898-5
13 1.284 [32.61] 1.200 [30.48] 5-103336-6 5-102898-6
14 1.384 [35.15] 1.300 [33.02] 5-103336-7 5-102898-7
15 1.484 [37.69] 1.400 [35.56] 5-103336-8 5-102898-8
16 1.584 [40.23] 1.500 [38.10] 5-103336-9 5-102898-9
17 1.684 [42.77] 1.600 [40.64] 6-103336-0 6-102898-0
18 1.784 [45.31] 1.700 [43.18] 6-103336-1 6-102898-1
19 1.884 [47.85] 1.800 [45.72] 6-103336-2 6-102898-2
20 1.984 [50.39] 1.900 [48.26] 6-103336-3 6-102898-3
21 2.084 [52.93] 2.000 [50.80] — 6-102898-4
22 2.184 [55.47] 2.100 [53.34] — 6-102898-5
23 2.284 [58.01] 2.200 [55.88] — 6-102898-6
24 2.384 [60.55] 2.300 [58.42] — 6-102898-7
25 2.484 [63.09] 2.400 [60.96] 6-103336-8 6-102898-8
26 2.584 [65.63] 2.500 [63.50] — 6-102898-9
27 2.684 [68.17] 2.600 [66.04] — 7-102898-0
28 2.784 [70.71] 2.700 [68.58] — 7-102898-1
29 2.884 [73.25] 2.800 [71.12] — 7-102898-2
30 2.984 [75.79] 2.900 [73.66] 7-103336-3 7-102898-3
32 3.184 [80.87] 3.100 [78.74] 7-103336-5 7-102898-5
36 3.584 [91.03] 3.500 [88.90] 7-103336-9 7-102898-9
40 3.984 [101.19] 3.900 [99.06] 8-103336-3 8-102898-3
Note: To insert header into PC board, use seating tool with arbor tool or air powered machine—page 152.
147
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
ACTION PIN Headers,
Unshrouded
A
.200
[5.08] Ref.
(Contact Area)
B
.042
[1.07]
(2 Plc.)
.025 [0.64] Square
Straight Post
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
ACTION PIN Posts — pages 150, 151
Application Tooling — page 152
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications
.250
[6.35]
.320
[8.13]
B
.100*
[2.54]
See page 151 for
hole dimensions
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.100
[2.54]
.100
[2.54] Typ.
.192
[4.88]
.090
[2.29]
Part Nos.
For .093-.125
No. of Dimensions For .062 [1.57] [.236-3.18]
Pos. ABThick Thick
PC Boards PC Boards
4.184 [4.67] .100 [2.54] 5-103542-1 5-103233-1
6.284 [7.21] .200 [5.08] 5-103542-2 5-103233-2
8.384 [9.75] .300 [7.62] 5-103542-3 5-103233-3
10 .484 [12.29] .400 [10.16] 5-103542-4 5-103233-4
12 .584 [14.83] .500 [12.70] 5-103542-5 5-103233-5
14 .684 [17.37] .600 [15.24] 5-103542-6 5-103233-6
16 .784 [19.91] .700 [17.78] 5-103542-7 5-103233-7
18 .884 [22.45] .800 [20.32] 5-103542-8 5-103233-8
20 .984 [24.99] .900 [22.86] 5-103542-9 5-103233-9
22 1.084 [27.53] 1.000 [25.40] 6-103542-0 6-103233-0
24 1.184 [30.07] 1.100 [27.94] 6-103542-1 6-103233-1
26 1.284 [32.61] 1.200 [30.48] 6-103542-2 6-103233-2
28 1.384 [35.15] 1.300 [33.02] 6-103542-3 6-103233-3
30 1.484 [37.69] 1.400 [35.56] 6-103542-4 6-103233-4
32 1.584 [40.23] 1.500 [38.10] 6-103542-5 6-103233-5
34 1.684 [42.77] 1.600 [40.64] 6-103542-6 6-103233-6
36 1.784 [45.31] 1.700 [43.18] 6-103542-7 6-103233-7
38 1.884 [47.85] 1.800 [45.72] 6-103542-8 6-103233-8
40 1.984 [50.39] 1.900 [48.26] 6-103542-9 6-103233-9
42 2.084 [52.39] 2.000 [50.80] 7-103542-0 7-103233-0
46 2.284 [58.01] 2.200 [55.88] 7-103542-2 —
50 2.484 [63.09] 2.400 [60.96] 7-103542-4 7-103233-4
60 2.984 [75.79] 2.900 [73.66] 7-103542-9 7-103233-9
66 3.284 [83.41] 3.200 [81.28] 8-103542-2 —
80 3.984 [101.19] 3.900 [99.06] 8-103542-9 8-103233-9
.100*
[2.54]
.050
[1.27]
Max.
148
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Headers—Shrouded with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
ACTION PIN Headers,
Shrouded
A
.200
[5.08] Ref.
(Contact Area)
B
.066
[1.68]
(2 Plc.)
.025 [0.64] Square
Straight Post (with Detent
Windows, for .093-.125
[.236-3.18] Thick PC Board)
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Connectors —
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 217-219
AMPMODU MT Receptacles —
pages 256, 257
ACTION PIN Posts — pages 150, 151
Application Tooling — page 152
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications
.250
[6.35]
.320
[8.13]
B
.100*
[2.54]
See page 151 for
hole dimensions
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.100
[2.54] Typ.
.090
[2.29]
No. of Dimensions Header
Pos. AB C D E Part Nos.
6.412 [10.46] .332 [8.43] .200 [5.08] .106 [2.69] — 5-102699-2
8.512 [13.00] .432 [10.97] .300 [7.62] .106 [2.69] — 5-102699-3
10 .612 [15.54] .532 [13.51] .400 [10.16] .206 [5.23] — 5-102699-4
12 .712 [18.08] .632 [16.05] .500 [12.70] .206 [5.23] — 5-102699-5
14 .812 [20.62] .732 [18.59] .600 [15.24] .306 [7.77] — 5-102699-6
16 .912 [23.16] .832 [21.13] .700 [17.78] .306 [7.77] — 5-102699-7
18 1.012 [25.70] .932 [23.67] .800 [20.32] .406 [10.31] — 5-102699-8
20 1.112 [28.24] 1.032 [26.21] .900 [22.86] .106 [2.69] .806 [20.47] 5-102699-9
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09] 6-102699-2
30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17] 6-102699-4
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25] 6-102699-6
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87] 6-102699-9
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57] 7-102699-3
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27] 7-102699-8
.100*
[2.54]
C
.090
[2.29]
(2 Plc.)
.100
[2.54]
.040
[1.02]
(3 Plc.)
.400
[10.16]
.440
[11.18]
.085
[2.16]
.240
[6.10]
(2 Plc.)
D
E
149
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Headers—Shrouded with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
ACTION PIN Headers,
Shrouded
A
.200
[5.08] Ref.
(Contact Area)
B
.150
[3.81]
(2 Plc.)
.025 [0.64] Square
Straight Post (with Detent
Windows, for .093-.125
[.236-3.18] Thick PC Board)
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Connectors —
AMPMODU MTE Receptacles —
pages 232, 233
ACTION PIN Posts — pages 150, 151
Application Tooling — page 152
Accessories
Barrier Insert — page 204
Technical Documents — page 276
See mating connector for applicable
product and application specifications
.250
[6.35]
.320
[8.13]
B
.100*
[2.54]
See page 151 for
hole dimensions
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.100
[2.54] T
yp.
.090
[2.29]
No. of Dimensions Header
Pos. AB C D E Part Nos.
6.580 [14.73] .500 [8.43] .200 [5.08] .190 [4.83] — 6-102557-0
8.680 [17.27] .600 [10.97] .300 [7.62] .190 [4.83] — 6-102557-1
10 .780 [19.81] .700 [17.78] .400 [10.16] .290 [7.37] — 5-102557-9
12 .880 [22.35] .800 [20.32] .500 [12.70] .290 [7.37] — 6-102557-2
14 .980 [24.89] .900 [22.86] .600 [15.24] .390 [9.91] — 6-102557-3
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] .390 [9.91] — 6-102557-4
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] .490 [10.31] — 6-102557-5
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] .190 [4.83] .890 [22.61] 5-102557-2
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 6-102557-7
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 5-102557-3
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 5-102557-4
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] .190 [4.83] 1.590 [40.39] 5-102557-5
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] .190 [4.83] 1.890 [48.01] 5-102557-1
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] .190 [4.83] 2.390 [60.71] 5-102557-6
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] .190 [4.83] 2.890 [73.41] 5-102557-7
.100*
[2.54]
C
.090
[2.29]
(2 Plc.)
.100
[2.54]
.040
[1.02]
(3 Plc.)
.400
[10.16]
.440
[11.18]
.085
[2.16]
.240
[6.10]
(2 Plc.)
D
E
150
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Press-Fit Posts
ACTION PIN
Press-Fit Posts
The Reliable Plated-Through Hole Interconnect
Solderless interconnections have been popular in electrical
and electronic applications with world-wide success for
decades. They provide reliable electrical and mechanical
stability and offer applied-cost savings across the board.
For PC board applications, compliant ACTION PIN posts
provide these features:
■ Large gas-tight contact zone
■ High reliability due to stored energy
■ More resistant to damage to plated-through holes during
installation
■ Especially suited for multilayer PC boards
■ Less costly board manufacturing due to larger hole
tolerances compared to use of solid pins
■ Application can be made by end-user
■ Repairability—contact can be replaced in the same pin
location (two repairs)
■ Installation with no heat cycling of board
■ Permits mass insertion by minimizing forces needed to
insert pins as compared to solid pin press-fit application
■ Significant applied-cost savings in many applications
Since compliant ACTION PIN posts do not have to be
soldered, problems associated with solder are eliminated,
such as:
■Faulty solder joints
■Solder fumes; contaminants are deposited on the
contacts
■Solder spots; short circuits between printed circuits
■Flux residuals
■Thermal strain on printed circuit boards and
components
■Degassing of plated-through holes
Solderless press-fit interconnections using compliant pins
are primarily integrated in, but not limited to, backplanes.
Solderless press-fit interconnections are used in racks,
especially where connectors must be fixed on the solder
side of the PC board and/or component side. In these
applications, the holes for ACTION PIN post connectors are
covered during the soldering process and press-fitting is
performed after soldering.
Other applications for ACTION PIN post interconnections
include PC boards that incorporate components using
surface mount technology (SMT). Here, too, press-fit
interconnections can be applied after soldering, thus
eliminating complications associated with connectors
suitable for surface mounting.
Cross-Section Area of ACTION PIN Press-Fit Post in Printed Circuit
Board Holes
Minimum
Hole Dia.
.037 [0.94]
Maximum
Hole Dia.
.043 [1.09]
Principle of the Compliant ACTION PIN Post
When a compliant ACTION PIN post is inserted into a
plated-through hole, two spring members are compressed,
exerting force against the hole for a gas-tight connection.
The diameter of the hole is smaller than the diagonal size of
the pin (see cross-section illustration below).
The beam characteristics of the pin are designed so that a
plastic, as well as an elastic, deformation takes place during
insertion. The two spring members compress to different
degrees to accommodate hole tolerances. The compliant
pin also reduces strain on the board. With a rigid pin, the
elastic strain energy is stored entirely in the board, leading
to damage of the plated-through holes. With the compliant
ACTION PIN post, the residual force of the elastic
deformation maintains stored energy to produce a tight
contact zone between the pin and the plated-through hole.
This maintains long-term electrical and mechanical
reliability of the interconnection.
151
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Press-Fit Posts (Continued)
ACTION PIN
Press-Fit Posts
PC Board Thickness
ACTION PIN posts are
designed for use in a variety
of PC board thicknesses.
However, certain ACTION
PIN posts are to be used in
specific ranges of board
thicknesses. To promote
optimum
performance, the
recommended board
thicknesses provided with
the connector being used
must be followed.
ACTION PIN posts provide a more reliable press-fit
connection. Localized pressure in the interface area provides
oxide break-through and prevents corrosion better in many
of the harshest environments to help provide a reliable
connection. Also, radial and axial distortion are controlled to
meet today’s standards for multilayer board applications.
➀ Annular Ring (See Note)
➁ Drilled Hole
➂ Copper Thickness
➃ Tin-lead Thickness
➄ Plated-Through Hole
➁
➄
➂
➃
➀
ACTION PIN Contact Drilled Hole Plating Thicknesses Plated-Through Distortion Specification*
Material Thickness Diameter➁Copper➂* Tin-lead➃Hole Diameter➄Average Maximum
.025 [0.64] .0453±.001 [1.151±0.03].001-.003 [0.03-0.08] .0003 [0.008]Min. .037-.043 [0.94-1.09] .0015 [0.038] .002 [0.05]
*Maximum hardness of copper layer is 150 Knoop.
**Radial hole distortion.
Note: Recommended annular ring diameter is hole diameter plus .020 [0.51].
ACTION PIN Post/PC Board Applications
152
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Application Tooling for AMPMODU Headers with ACTION PIN Posts
Note: All part numbers are RoHS compliant.
Application Tooling for
ACTION PIN Posts
Pin headers with
ACTION PIN posts allow
high speed, solderless
back-plane construction
through press-fit applica-
tion. Press fitting connectors
to printed circuit boards
requires special seating
tools which transfer applica-
tion force directly to the
contacts.
Force applied to the tool
to seat the connectors
can be provided by the TE
seating machines shown on
this page.
For tooling information,
call the TE Automation
Group 1-800-722-1111.
Single-Row Connector
Seating Tools
Tooling Assembly No. 91171-1
is used to install single-row
AMPMODU headers with
ACTION PIN posts into
PC boards.
ACTION PIN Post
Replacement Tooling
Rear Insertion/Extraction Tool
No. 265871-7 (Ref. 408-2636)
Includes:
Impact Tool No. 380392-8
Removal Tool No. 265964-1
Replacement Tip No. 308554-1
Double-Row Connector
Seating Tools
Header Size Tool
(No. of Pos.) Assembly No.
491170-1
691170-1
891170-2
12 91170-5
14 91170-6
16 91170-7
20 91170-9
24 1-91170-1
30 1-91170-4
36 1-91170-7
40 1-91170-9
50 2-91170-4
60 2-91170-9
80 3-91170-2
96 3-91170-5
100 3-91170-6
120 3-91170-8
140 4-91170-0
200 4-91170-2
Triple-Row Connector
Seating Tools
Header Size Tool
(No. of Pos.) Assembly No.
96 91169-8
105 91169-6
120 91169-7
150 91169-3
195 91169-2
204 91169-1
210 91169-5
300 91169-9
Press Model Description Max Pressing Force Max Board Size (L x W)
tons [kN] in [mm]
BMEP 3T Semi-automatic, benchtop 3 [26.7] 18 x 24 [460 x 610]
servo-electric press
BMEP 5T Semi-automatic, benchtop 5 [44.5] 18 x 24 [460 x 610]
servo-electric press
MEP 6T Semi-automatic, stand-alone 6 [53.4] 24 x 36 [610 x 914]
servo-electric press
MEP 12T Semi-automatic, stand-alone 12 [106.8] 30 x 36 [ 762 x 914]
servo-electric press
AEP 12T Automatic, inline 12 [106.8] 36 x 48 [914 x 1219]
servo-electric press
AEP 6T Automatic, stand alone 6 [53.4] 30 x 36 [762 x 914]
servo-electric press
ASG Servo Electric Presses
TE offers a wide range of
servo-electric presses for
the application of press-fit
connectors. Systems are
available with varying force
capacity, board size capac-
ity and process capability.
Each system features real-
time force feedback and PC
control to allow the highest
level of control and trace-
ability. Every connector
pressed is monitored to con-
firm that maximum force is
not exceeded and minimum
force is met. Each system
controls force, height and
speed to allow termination
of the pressing cycle by
force or height parameters.
Complete SPC data is avail-
able as each connector
press cycle is monitored
and stored.
Please see the matrix
below and contact TE
Automation Group at 1-800-
722-1111 for assistance in
understanding which system
will best meet your needs.
BMEP 5T
AEP 6T
153
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Application Tooling for Post Insertion
Note: All part numbers are RoHS compliant.
Application Tooling for
ACTION PIN Posts
Modular Insertion System Bench
Machine No. 217600-1
This machine uses TE insertion heads to install a variety of
printed circuit board products at rates of 2,000 per hour.
The printed circuit board is placed in a Board Holding
Fixture which is attached to a two-hand controlled mecha-
nism. The operator moves the board over the machine
anvil; a switch in the anvil actuates the machine when the
printed circuit board is placed on the anvil. A spotlight
illuminates the insertion area.
Consult TE for further information on this machine and the
insertion heads.
P300 and P350 Automatic Insertion Machines
The P300 and P350 are automatic insertion machines
for the application of reeled compliant pin and thru-hole
products. Systems are available as stand alone or fully
inline with SMEMA compatible conveyor system. Up to
3 different insertion heads can be mounted on a system
allowing one machine to apply up to 3 different products.
Insertion rates of up to 3 insertions per second on the P300
and up to 5 insertions per second on a P350 are possible
(application dependent). PCBs up to 15.5" x 23.5"
[400x600mm] on the P300 and up to 17.5" x 17.5"
[450x450mm] on the P350 can be processed by high
speed XY positioning tables. A wide range of options,
including force monitoring, PCB vision correct, and
PCB thickness measurement are available to meet your
performance and production flexibility requirements.
TE offers a wide range of
application tooling solutions
ranging from stand alone
manual insertion systems
through fully automatic
inline systems. Please
contact your local TE repre-
sentative or the TE Tooling
Assistance Center at
1-800-722-1111 for help in
finding the right solution to
meet your particular
requirements.
154
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Stacking Connector System
(Non-Intermateable with AMPMODU Connectors)
ACTION PIN Stacking
Connector System
ACTION PIN Stacking
Connectors are a family of
two-piece connectors used to
stack multiple printed circuit
boards in parallel. They have
been developed to provide
a more reliable and
economical means of
compact wiring and high-
density packaging inside a
variety of electronic
equipment.
The connectors have many
advanced features: they
can be used to connect
bus lines in the shortest
possible distance without
the need of a mother board,
thus permitting effective
utilization of space above
the board; compared with
other methods of jumper
connection using cable
connectors, they make the
overall board layout more
clean and straight for
compact packaging.
Contacts are on 2.54 x 2.54
[.100 x .100] grid. The
connectors are available in
sizes of 26, 30, 34, 40,
50 and 60 positions.
ACTION PIN Stacking
Connectors consist of a
receptacle assembly, a
mating post header and
a post hood to protect
the post portion of the
receptacle assembly.
A complete description
of the ACTION PIN
Stacking Connectors is
presented on the following
page (155).
Product Facts
■Can stack multiple printed
circuit boards without the
need of a mother board
■Connect bus lines in the
shortest possible distance
■Receptacle assembly has
ACTION PIN posts for sol-
derless board mounting
■Can be mounted onto the
board simply by press
fitting with Mini-Press
■Receptacle assembly is
easy to service and replace
(up to 2 times)
■Receptacle contacts are
of fork design to mate with
posts at two points.
Virtually eliminates danger
of scooping at mating/
unmating
■Stacking dimensions are
13.4 [.528] or 19.0 [.748]
when using receptacle
assemblies together, and
13.9 [.547] or 19.5 [.768]
when using a combination
of receptacle and post
header assemblies
■Accepts 1.6 [.062] thick
boards
■Housing provided with
polarization to help prevent
mismating
■Housing made of chemical-
resistant glass-filled PBT,
black in color
■Contacts are of copper alloy
material with high spring
characteristics, gold-over-
nickel plated
■Post hood available to
protect the post portion of
receptacle contacts. Can be
selected depending on
stacking dimensions
■Connectors available in
sizes of 26, 30, 34, 40, 50
and 60 positions
■Product specification:
108-5197
METRIC
Dimensions are
millimeters over inches
155
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
ACTION PIN Stacking Connector System
(Non-Intermateable with AMPMODU Connectors) (Continued)
Note: All part numbers are RoHS compliant.
ACTION PIN Stacking
Connector System
Receptacle Assembly
The receptacle assembly
features reliability and
economy characteristic of
this product line.
The mating portion of its
built-in receptacle contacts
is a fork design, highly
resilient and helps prevent
damage to contacts by
scooping at mating/
unmating.
On the board mount side of
the assembly are 0.55 [.022]
square ACTION PIN posts.
No soldering is required to
mount the assembly on the
board, the posts being simply,
press fit into the board’s
0.825 [.032] diameter holes.
Two types of receptacle
assemblies are available;
one is used with an outer-
most board and the other
with intermediary boards. A
solder version is also avail-
able for the outer board
mount assembly.
Post Hood
When using the intermediary
board mount receptacle
assembly, this post hood is
used to protect the post
portion of the assembly. The
post hood is available in two
types: one with the housing
height of 10.0 [.394] and the
other with the housing height
of 15.7 [.618]. They can be
selected, depending on
stacking dimensions.
Post Header
The post header is mounted
onto the outer board on the
other side of the board to
which an outer board mount
receptacle assembly is
applied. The post header is
preloaded with 0.50 [.022]
square soldering posts.
These posts are protected by
the side walls of the housing.
Stacking dimensions
provided by this connector
line are as follows:
When the outer board
receptacle and intermediary
board receptacle
assemblies are used
13.4 [.528] or 19.0 [.748].
When the intermediary
board receptacle assembly
and the post header
assembly are used
13.9 [.547] or 19.5 [.768].
Typical Application
Receptacle Assembly
(For outer board)
(ACTION PIN Type)
Part No.: 173145
Post Hood
Part No.: 173144
Receptacle Assembly
(For inner board)
(ACTION PIN Type)
Part No.: 173145
Post Header
(Solder Type)
Part No.: 173146
PC Board
1.6
[.062]
thickness
Stacking Dim.
13.4 [.528], 19.0 [.748]
Receptacle + Receptacle
PC Board
1.6
[.062]
thickness
Stacking Dim.
13.9 [.547], 19.5 [.768]
Receptacle + Post
PC Board
1.6
[.062]
thickness
METRIC
Dimensions are
millimeters over inches
156
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Post Hood (Non-Intermateable with AMPMODU Connectors)
Note: All part numbers are RoHS compliant.
Stacking Connectors,
Post Hood
The post hood, mounted
onto the post of the
intermediary receptacle
assembly, protects the post
and serves as a header
assembly when stacking
several boards.
Material
Black glass-filled PBT, 94V-0 rated
Acceptable No. of Dimensions (See Note.) Post Hood
Post Length Pos. AB C
Part Nos.
For 26 38.1 [1.500] 30.48 [1.200] 10.0 [.394] 1-173144-1
8.9 [.350] 30 43.2 [1.700] 33.56 [1.321] 10.0 [.394] 173144-2
or 34 48.3 [1.900] 40.64 [1.600] 10.0 [.394] 1-173144-2
10.9 [.429] 40 55.9 [2.200] 48.26 [1.900] 10.0 [.394] 173144-3
(For Stacking Dimension) 50 68.6 [2.700] 65.96 [2.597] 10.0 [.394] 173144-4
13.4 [.528] 60 81.3 [3.200] 73.66 [2.900] 10.0 [.394] 173144-5
26 38.1 [1.500] 30.48 [1.200] 15.6 [.614] 1-173144-3
For 30 43.2 [1.700] 33.56 [1.321] 15.6 [.614] 173144-7
14.5 [.571] 34 48.3 [1.900] 40.64 [1.600] 15.6 [.614] 1-173144-4
or
40 55.9 [2.200] 48.26 [1.900] 15.6 [.614] 173144-8
16.5 [.650]
3-173144-8*
(For Stacking Dimension)
50 68.6 [2.700] 65.96 [2.597] 15.6 [.614] 173144-9
19.0 [.748]
60 81.3 [3.200] 73.66 [2.900] 15.6 [.614] 1-173144-0
*0.60 [.024] dia. applies to 16 holes on both sides, except Part No. 3-173144-8.
2.54
[.100]
Pitch
2.54
[.100]
8.9
[.350]
X
X
B
A
YY
C
10.0
[.394]
*
0.75
[.030]
Hole Dia.
0.6*
[.024]
Hole Dia.
Section X-X
Section Y-Y
METRIC
Dimensions are
millimeters over inches
157
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies with ACTION PIN Posts and Solder Posts
(Non-Intermateable with AMPMODU Connectors)
Note: All part numbers are RoHS compliant.
Stacking Connectors,
Receptacles
For Outer Board
Post No. of Dimensions (See Note.) Receptacle
Type Length Assembly
LPos. AB
Part Nos.
26 35.6 [1.402] 30.48 [1.200] 1-173145-7
30 40.6 [1.598] 35.56 [1.400] 173145-2
ACTION PIN 4.2* 34 45.7 [1.799] 40.64 [1.600] 1-173145-8
Post 40 53.3 [2.098] 48.26 [1.900] 173145-3
50 66.0 [2.598] 60.96 [2.400] 173145-4
60 78.7 [3.098] 73.66 [2.900] 173145-5
26 35.6 [1.402] 30.48 [1.200] 2-173145-8
30 40.6 [1.598] 35.56 [1.400] 2-173145-4
34 45.7 [1.799] 40.64 [1.600] 2-173145-9
Solder Post 4.2* 40 53.3 [2.098] 48.26 [1.900] 2-173145-5
50 66.0 [2.598] 60.96 [2.400] 2-173145-6
60 78.7 [3.098] 73.66 [2.900] 2-173145-7
3-173145-0**
**After mounted receptacle assembly is on board, dimension of extrude length from board is 2.6 [.102].
**Post Length = 17.0 [.669] , Blank Width = 0.69 [.027] (see above figure) (finished hole dia. = 1.0 [.039]).
Receptacle Assembly for
Outer Board (With 0.55
[.022] Square Post)
Material and Finish
Housing — Black glass-filled PBT,
94V-0 rated
Contacts — Copper alloy, plated
0.00020 [.000008] gold on contact area
and post mating area, gold flash on
ACTION PIN tail or 0.000070 [.0000027]
tin on solder tail, with entire contact
underplated 0.00130 [.000050] nickel
Application Tooling shown on
page 162.
PC Board Mounting
Dimensions
Thru hole
plating Copper
0.02500-0.05000
[.000984-.001968]
Land dia.
1.4
[.055] Min.
Board
Thick
1.6
[.062]
Finished
hole dia.
0.825±0.05
[.032±.002]PCB drill hole
0.9±0.025
[.035±.0001]
ACTION PIN Post
Board
Thick
1.6
[.062]
Finished
hole dia.
0.8±0.05
[.031±.002]
Solder Post
Recommended PC Board Hole Layout
7.6
[.300]
2.54
[.100]
Pitch
2.54
[.100]
A
B
YY
11.9
[.469]
2.54
[.100] Pitch
B
X
X
Mating
Area
2.54
[.100]
2.54
[.100]
2.54
[.100]
0.5
[.020]
16.5
[.650]
Blank
width
0.69**
[.027]
6.4
[.252]
Contact
Area
Contact
Area
0.5
[.020]
6.4
[.252]
3.7
[.146]
0.5
[.020]
ACTION
PIN
Area
L
L
Section X-X
Solder Type
2.54±0.1
[.100±.004]
2.54±0.1
[.100±.004]
B±0.1
[±.004]
Section X-X
ACTION PIN
Type
Section Y-Y
3.7
[.146]
METRIC
Dimensions are
millimeters over inches
158
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies with ACTION PIN Posts
(Non-Intermateable with AMPMODU Connectors)
Note: All part numbers are RoHS compliant.
Stacking Connectors,
Receptacles
Stacking Post No. of Dimensions (See Note.) Receptacle
Length Assembly
Dimensions LPos. AB
Part Nos.
30 40.6 [1.598] 35.56 [1.400] 3-173145-2
34 45.7 [1.799] 40.64 [1.600] 3-173145-7
8.9 40 53.3 [2.098] 48.26 [1.900] 3-173145-3
.350 3-173145-1*
50 66.0 [2.598] 60.96 [2.400] 3-173145-4
13.4 [.528] 60 78.7 [3.098] 73.66 [2.900] 3-173145-5
26 35.6 [1.402] 30.48 [1.200] 1-173145-9
30 40.6 [1.598] 35.56 [1.400] 173145-7
10.9 34 45.7 [1.799] 40.64 [1.600] 2-173145-0
.429 40 53.3 [2.098] 48.26 [1.900] 173145-8
50 66.0 [2.598] 60.96 [2.400] 173145-9
60 78.7 [3.098] 73.66 [2.900] 1-173145-0
*Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
Receptacle Assembly for
Inner Board (With 0.55
[.022] Square Post)
Material and Finish
Housing — Black glass-filled PBT,
94V-0 rated
Contacts — Copper alloy, plated
0.00020 [.000008] gold on contact area
and post mating area, gold flash on
ACTION PIN tail or 0.000070 [.0000027]
tin on solder tail, with entire contact
underplated 0.00130 [.000050] nickel
Application Tooling shown on
page 162.
PC Board Mounting
Dimensions
Thru hole
plating Copper
0.02500-0.05000
[.000984-.001968]
Land dia.
1.4
[.055] Min.
Board
Thick
1.6
[.062]
Finished
hole dia.
0.825±0.05
[.032±.002]PCB drill hole
0.9±0.025
[.035±.0001]
Recommended PC Board Hole Layout
7.6
[.300]
2.54
[.100]
Pitch
2.54
[.100] A
B
YY
11.9
[.469]
2.54
[.100] Pitch
B
X
X
Mating
Area
2.54
[.100]
6.4
[.252]
Contact
Area
0.5
[.020]
ACTION
PIN
Area L
Section X-X
2.54±0.1
[.100±.004]
2.54±0.1
[.100±.004]
B±0.1
[±.004]
3.7
[.146]
Section Y-Y
For Inner Board
METRIC
Dimensions are
millimeters over inches
159
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies with ACTION PIN Posts
(Non-Intermateable with AMPMODU Connectors) (Continued)
Note: All part numbers are RoHS compliant.
Stacking Connectors,
Receptacles
Stacking Post No. of Dimensions (See Note.) Receptacle
Length Assembly
Dimensions LPos. AB
Part Nos.
26 35.6 [1.402] 30.48 [1.200] 4-173145-2
3040.6 [1.598] 35.56 [1.400] 3-173145-8
14.5 [.571] 3445.7 [1.799] 40.64 [1.600] 4-173145-3
40 53.3 [2.098] 48.26 [1.900] 3-173145-9
5066.0 [2.598] 60.96 [2.400] 4-173145-0
19.0 [.748] 6078.7 [3.098] 73.66 [2.900] 4-173145 -1
26 35.6 [1.402] 30.48 [1.200] 2-173145-1
30 40.6 [1.598] 35.56 [1.400] 1-173145-2
16.5 [.650] 3445.7 [1.799] 40.64 [1.600] 2-173145-2
4053.3 [2.098] 48.26 [1.900] 1-173145-3
50 66.0 [2.598] 60.96 [2.400] 1-173145-4
60 78.7 [3.098] 73.66 [2.900] 1-173145-5
*Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
For Inner Board (Continued)
METRIC
Dimensions are
millimeters over inches
160
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Post Headers with Solder Posts
(Non-Intermateable with AMPMODU Connectors)
Note: All part numbers are RoHS compliant.
Stacking Connector
Post Headers
Stacking Post No. of Dimensions (See Note.) Part Nos. of
Length Post Header
Dimensions LPos. ABC
Assembly
26 38.1 [1.500] 30.48 [1.200] 10.5 [.413] 3-173146-5
30 43.2 [1.700] 35.56 [1.400] 10.5 [.413] 3-173146-1
34 48.3 [1.900] 40.64 [1.600] 10.5 [.413] 3-173146-6
5.8 [.228] 40 55.9 [2.200] 48.26 [1.900] 10.5 [.413] 3-173146-2
3-173146-0*
50 68.6 [2.700] 60.96 [2.400] 10.5 [.413] 3-173146-3
13.9 [.547] 60 81.3 [3.200] 73.66 [2.900] 10.5 [.413] 3-173146-4
26 38.1 [1.500] 30.48 [1.200] 10.5 [.413] 2-173146-1
30 43.2 [1.700] 35.56 [1.400] 10.5 [.413] 1-173146-7
34 48.3 [1.900] 40.64 [1.600] 10.5 [.413] 2-173146-2
7.8 [.307] 40 55.9 [2.200] 48.26 [1.900] 10.5 [.413] 1-173146-8
4-173146-3*
50 68.6 [2.700] 60.96 [2.400] 10.5 [.413] 1-173146-9
60 81.3 [3.200] 73.66 [2.900] 10.5 [.413] 2-173146-0
*Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
Post Header
(With 0.55 [.022] Square
Post)
Material and Finish
Housing — Black glass-filled PBT,
94V-0 rated
Posts — Copper alloy, plated 0.00020
[.000008] gold on contact area,
0.000070 [.0000027] min. tin on solder
tail, with entire post underplated
0.00130 [.000050] nickel
PC Board Mounting
Dimensions
Board
Thick
1.6
[.062]
Finished
hole dia.
0.8±0.06
[.031±.002]
Recommended PC Board Hole Layout
8.9
[.350]
2.54
[.100]
Pitch
2.54
[.100]
A
B
YY
X
X
8.5
[.335]
0.5
[.020]
C
Section X-X
2.54±0.1
[.100±.004]
2.54±0.1
[.100±.004]
B±0.1
[±.004]
3.7
[.146]
B
L
Section Y-Y
2.54
[.100]
Pitch
METRIC
Dimensions are
millimeters over inches
161
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Post Headers with Solder Posts
(Non-Intermateable with AMPMODU Connectors) (Continued)
Note: All part numbers are RoHS compliant.
Stacking Connector
Post Headers
Stacking Post No. of Dimensions (See Note.) Part Nos. of
Length Post Header
Dimensions LPos. ABC
Assembly
2638.1 [1.500] 30.48 [1.200] 16.1 [.634] 4-173146-1
3043.2 [1.700] 35.56 [1.400] 16.1 [.634] 3-173146-7
3448.3 [1.900] 40.64 [1.600] 16.1 [.634] 4-173146-2
11.4 [.449] 4055.9 [2.200] 48.26 [1.900] 16.1 [.634] 3-173146-8
50 68.6 [2.700] 60.96 [2.400] 16.1 [.634] 3-173146-9
60 81.3 [3.200] 73.66 [2.900] 16.1 [.634] 4-173146-0
19.5 [.768] 26 38.1 [1.500] 30.48 [1.200] 16.1 [.634] 2-173146-8
3043.2 [1.700] 35.56 [1.400] 16.1 [.634] 2-173146-4
3448.3 [1.900] 40.64 [1.600] 16.1 [.634] 2-173146-9
13.4 [.528]
4055.9 [2.200] 48.26 [1.900] 16.1 [.634] 2-173146-5
50 68.6 [2.700] 60.96 [2.400] 16.1 [.634] 2-173146-6
60 81.3 [3.200] 73.66 [2.900] 16.1 [.634] 2-173146-7
*Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
METRIC
Dimensions are
millimeters over inches
162
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Application Tooling for ACTION PIN Stacking Connectors
Note: All part numbers are RoHS compliant.
Application Tooling for
ACTION PIN Stacking Connectors
Mini-Press
No. of Part No.
Pos.
40 1-758030-1
50 1-758030-2
60 1-758030-3
The part numbers above
include the Mini-Press unit,
insertion support plate and
press-fit jig.
Mini-Press Unit
Part No. 1-758030-3
When ordering a press-fit jig
only, consult the table
below.
Press-fit Jig (separate order)
No. of Part No.
Pos.
26 907459-1
30 907459-2
34 907459-3
40 907459-4
50 907459-5
60 907459-6
Also, optional insertion
support plates are
obtainable by separate
order to meet your specific
requirements for improved
board handling.
1. Insert connector into the board tentatively (Be sure that
connector is in the right direction).
2. Attach insertion support plate to the leg portion of con-
nector from below.
3. Set insertion support plate in place by butting it against
Mini-Press platform.
4. By pressing Mini-Press handle down, rest the press-fit
jig against connector.
5. Press handle down gently and insert connector into
the board.
6. Now connector has been mounted to the board
securely.
Insertion Support Unit
(Option)
163
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
.025 [0.64] Square Posts
Note: All part numbers are RoHS compliant.
Square Posts
Bandolier and Strip Form
Dimensions Post Plating/Part Nos. Post/Tab
AB CPlating A Plating B Plating C Plating D Insertion Head
.210 [5.33] .227 [5.77] .437 [11.10] ——1-87878-6 1-87022-4 —
.278 [7.06] .165 [4.19] .443 [11.25] 5-87623-1 5-87623-4 1-87022-1 1-87022-0 904507-1
.278 [7.06] .284 [7.21] .562 [14.27] ——1-87022-3 ——
.278 [7.06] .738 [18.75] 1.016 [25.81] ——1-87022-2 1-87022-4 —
.318 [8.08] .165 [4.19] .483 [14.27] ——4-87022-1 4-87022-3 —
Notes: 1. Approximate Posts per reel—20,000. *Point of measurement for plating thickness.
2. Other post lengths are available, consult TE.
3. The Post/Tab Insertion Head can be used on the Comp-U-Sertor II machine or the Modular Insertion
System Bench machine (see page 153).
4. For PCB finishes other than tin, contact TE.
Dimensions Post Plating/Part Nos. Bandolier
ABCDPlating A Plating B Plating C Insertion Head
.353 [8.97] .071 [1.80] .424 [10.77] .034 [0.86] 5-103577-1 6-103577-3 5-103577-7 904592-1
.318 [8.08] .071 [1.80] .389 [9.88] .034 [0.86] 5-103577-3 6-103577-5 5-103577-9 904591-1
.270 [6.86] .071 [1.80] .341 [8.66] .034 [0.86] 5-103577-5 6-103577-7 6-103577-1 904590-1
.031 [0.79] 5-146079-1 —— —
.183 [4.65] .097 [2.46] .280 [7.11] .031 [0.79] ——6-146079-3 —
Notes: 1. Posts can be applied using Hand Tool 91419-1. *Point of measurement for plating thickness.
2. Approximate posts per reel—30,000.
3. The Bandolier Insertion head can be used on the Comp-U-Sertor II machine or the Modular Insertion
System Bench machine (see page 153).
4. For PCB finishes other than tin, contact TE.
Material and Finish
Bandolier — Brass
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating C — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127] nickel
on entire post
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Accessories
End Shrouds — page 203
Application Tooling — page 153
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
Strip Form Posts (Uninsulated)
Material and Finish
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating C — .000030 [0.00076] gold over
.000050 [0.00127] nickel on entire post
Plating D — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127] nickel
on entire post
Bandolier Posts (Uninsulated)
.020
[0.51]
A
C
B
Localized
Tin Plate
Area
Localized
Gold Plate
Area
B
C
A
C
L
of Star
.020
[0.51]
Typ. .048+.006
.060 -.003
1.22+0.15
-0.08
[]
.097
[2.46] Max.
.100*
[2.54]
.100
[2.54]
.100
[2.54]
.070
[1.78]
Bandolier
Post
.010
[0.25]
T
yp. .010
[0.25]
.015
[0.38]
Customer
Board
PC Pad
.036±.002
[0.91±0.05]
Recommended
Plated Hole Size
for Tin Plated
Through Hole
Typ.
.050
[1.27] .100
[2.54]
.042
[1.07]
.100*
[2.54]
Customer
Board
PC Pad
D±.002
[±0.05]
Recommended
Plated Hole Size
for Tin Plated
Through Hole
Dia.
.080
[2.03]
164
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU .025 [0.64] Square Continuous Posts
.025 Square
Continuous Posts
TE now offers AMPMODU
.025 [0.64] Square
Continuous Posts. These
posts can be used instead
of the original posts that
come on a bandolier style
carrier strip. These posts
are on a reel, but the posts
are ‘notched’ at the desired
length (no carrier strip is
needed). This feature allows
more versatility by providing
post lengths from .400 to
1.000 [10.16 to 25.40],
available in increments of
.010 [0.25].
The posts are brass drawn
wire and are inserted into a
printed circuit board via
application tooling at any
centerline configuration.
They can be used for wire
wrap applications or mated
to a receptacle.
The current rating is 3 amps.
The posts are available
plated with tin, 15µ in. gold,
or 30µ in. gold. Other plat-
ings are available upon
request.
TE application tooling is a
modular head (Part Number
904641-1) placed on the
Modular Insertion System
Bench Machine (Part
Number 217600-1.)
Features of .025 [0.64]
Square Continuous Posts
■Brass drawn wire for posts
■.400 to 1.000 [10.16 to
25.40] overall pin length
(.010 [0.25] increments)
■Plating Options:
Tin
15µ in. gold
30µ in. gold
■Star feature also available
Benefits
■Less expensive than
bandolier style posts
■Can be placed on printed
circuit boards at any desired
centerline
■Less scrap material
(no carrier strip)
Technical Documents — page 276
Application Specification
114-13011
Note: All part numbers are RoHS compliant.
165
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU .025 [0.64] Square Continuous Posts (Continued)
Note: All part numbers are RoHS compliant.
.025 Square
Continuous Posts
Pre-Plated Tin
Part Number Description
Square Square with Star Post Length
147333-1 147433-1 0.400 [10.16]
147333-2 147433-2 0.410 [10.41]
147333-3 147433-3 0.420 [10.67]
147333-4 147433-4 0.430 [10.92]
147333-5 147433-5 0.440 [11.18]
147333-6 147433-6 0.450 [11.43]
147333-7 147433-7 0.460 [11.68]
147333-8 147433-8 0.470 [11.94]
147333-9 147433-9 0.480 [12.19]
1-147333-0 1-147433-0 0.490 [12.45]
1-147333-1 1-147433-1 0.500 [12.70]
1-147333-2 1-147433-2 0.510 [12.95]
1-147333-3 1-147433-3 0.520 [13.21]
1-147333-4 1-147433-4 0.530 [13.46]
1-147333-5 1-147433-5 0.540 [13.72]
1-147333-6 1-147433-6 0.550 [13.97]
1-147333-7 1-147433-7 0.560 [14.22]
1-147333-8 1-147433-8 0.570 [14.48]
1-147333-9 1-147433-9 0.580 [14.73]
2-147333-0 2-147433-0 0.590 [14.99]
2-147333-1 2-147433-1 0.600 [15.24]
Part Number Description
Square Square with Star Post Length
2-147333-2 2-147433-2 0.610 [15.49]
2-147333-3 2-147433-3 0.620 [15.75]
2-147333-4 2-147433-4 0.630 [16.00]
2-147333-5 2-147433-5 0.640 [16.26]
2-147333-6 2-147433-6 0.650 [16.51]
2-147333-7 2-147433-7 0.660 [16.76]
2-147333-8 2-147433-8 0.670 [17.02]
2-147333-9 2-147433-9 0.680 [17.27]
3-147333-0 3-147433-0 0.690 [17.53]
3-147333-1 3-147433-1 0.700 [17.78]
3-147333-2 3-147433-2 0.710 [18.03]
3-147333-3 3-147433-3 0.720 [18.29]
3-147333-4 3-147433-4 0.730 [18.54]
3-147333-5 3-147433-5 0.740 [18.80]
3-147333-6 3-147433-6 0.750 [19.05]
3-147333-7 3-147433-7 0.760 [19.30]
3-147333-8 3-147433-8 0.770 [19.56]
3-147333-9 3-147433-9 0.780 [19.81]
4-147333-0 4-147433-0 0.790 [20.07]
4-147333-1 4-147433-1 0.800 [20.32]
4-147333-2 4-147433-2 0.810 [20.57]
Part Number Description
Square Square with Star Post Length
4-147333-3 4-147433-3 0.820 [20.83]
4-147333-4 4-147433-4 0.830 [21.08]
4-147333-5 4-147433-5 0.840 [21.34]
4-147333-6 4-147433-6 0.850 [21.59]
4-147333-7 4-147433-7 0.860 [21.84]
4-147333-8 4-147433-8 0.870 [22.10]
4-147333-9 4-147433-9 0.880 [22.35]
5-147333-0 5-147433-0 0.890 [22.61]
5-147333-1 5-147433-1 0.900 [22.86]
5-147333-2 5-147433-2 0.910 [23.11]
5-147333-3 5-147433-3 0.920 [23.37]
5-147333-4 5-147433-4 0.930 [23.62]
5-147333-5 5-147433-5 0.940 [23.88]
5-147333-6 5-147433-6 0.950 [24.13]
5-147333-7 5-147433-7 0.960 [24.38]
5-147333-8 5-147433-8 0.970 [24.64]
5-147333-9 5-147433-9 0.980 [24.89]
6-147333-0 6-147433-0 0.990 [25.15]
6-147333-1 6-147433-1 1.000 [25.40]
Pre-Plated 15µ in. Gold
Part Number Description
Square Square with Star Post Length
147334-1 147434-1 0.400 [10.16]
147334-2 147434-2 0.410 [10.41]
147334-3 147434-3 0.420 [10.67]
147334-4 147434-4 0.430 [10.92]
147334-5 147434-5 0.440 [11.18]
147334-6 147434-6 0.450 [11.43]
147334-7 147434-7 0.460 [11.68]
147334-8 147434-8 0.470 [11.94]
147334-9 147434-9 0.480 [12.19]
1-147334-0 1-147434-0 0.490 [12.45]
1-147334-1 1-147434-1 0.500 [12.70]
1-147334-2 1-147434-2 0.510 [12.95]
1-147334-3 1-147434-3 0.520 [13.21]
1-147334-4 1-147434-4 0.530 [13.46]
1-147334-5 1-147434-5 0.540 [13.72]
1-147334-6 1-147434-6 0.550 [13.97]
1-147334-7 1-147434-7 0.560 [14.22]
1-147334-8 1-147434-8 0.570 [14.48]
1-147334-9 1-147434-9 0.580 [14.73]
2-147334-0 2-147434-0 0.590 [14.99]
2-147334-1 2-147434-1 0.600 [15.24]
Part Number Description
Square Square with Star Post Length
2-147334-2 2-147434-2 0.610 [15.49]
2-147334-3 2-147434-3 0.620 [15.75]
2-147334-4 2-147434-4 0.630 [16.00]
2-147334-5 2-147434-5 0.640 [16.26]
2-147334-6 2-147434-6 0.650 [16.51]
2-147334-7 2-147434-7 0.660 [16.76]
2-147334-8 2-147434-8 0.670 [17.02]
2-147334-9 2-147434-9 0.680 [17.27]
3-147334-0 3-147434-0 0.690 [17.53]
3-147334-1 3-147434-1 0.700 [17.78]
3-147334-2 3-147434-2 0.710 [18.03]
3-147334-3 3-147434-3 0.720 [18.29]
3-147334-4 3-147434-4 0.730 [18.54]
3-147334-5 3-147434-5 0.740 [18.80]
3-147334-6 3-147434-6 0.750 [19.05]
3-147334-7 3-147434-7 0.760 [19.30]
3-147334-8 3-147434-8 0.770 [19.56]
3-147334-9 3-147434-9 0.780 [19.81]
4-147334-0 4-147434-0 0.790 [20.07]
4-147334-1 4-147434-1 0.800 [20.32]
4-147334-2 4-147434-2 0.810 [20.57]
Part Number Description
Square Square with Star Post Length
4-147334-3 4-147434-3 0.820 [20.83]
4-147334-4 4-147434-4 0.830 [21.08]
4-147334-5 4-147434-5 0.840 [21.34]
4-147334-6 4-147434-6 0.850 [21.59]
4-147334-7 4-147434-7 0.860 [21.84]
4-147334-8 4-147434-8 0.870 [22.10]
4-147334-9 4-147434-9 0.880 [22.35]
5-147334-0 5-147434-0 0.890 [22.61]
5-147334-1 5-147434-1 0.900 [22.86]
5-147334-2 5-147434-2 0.910 [23.11]
5-147334-3 5-147434-3 0.920 [23.37]
5-147334-4 5-147434-4 0.930 [23.62]
5-147334-5 5-147434-5 0.940 [23.88]
5-147334-6 5-147434-6 0.950 [24.13]
5-147334-7 5-147434-7 0.960 [24.38]
5-147334-8 5-147434-8 0.970 [24.64]
5-147334-9 5-147434-9 0.980 [24.89]
6-147334-0 6-147434-0 0.990 [25.15]
6-147334-1 6-147434-1 1.000 [25.40]
Pre-Plated 30µ in. Gold
Part Number Description
Square Square with Star Post Length
147335-1 147435-1 0.400 [10.16]
147335-2 147435-2 0.410 [10.41]
147335-3 147435-3 0.420 [10.67]
147335-4 147435-4 0.430 [10.92]
147335-5 147435-5 0.440 [11.18]
147335-6 147435-6 0.450 [11.43]
147335-7 147435-7 0.460 [11.68]
147335-8 147435-8 0.470 [11.94]
147335-9 147435-9 0.480 [12.19]
1-147335-0 1-147435-0 0.490 [12.45]
1-147335-1 1-147435-1 0.500 [12.70]
1-147335-2 1-147435-2 0.510 [12.95]
1-147335-3 1-147435-3 0.520 [13.21]
1-147335-4 1-147435-4 0.530 [13.46]
1-147335-5 1-147435-5 0.540 [13.72]
1-147335-6 1-147435-6 0.550 [13.97]
1-147335-7 1-147435-7 0.560 [14.22]
1-147335-8 1-147435-8 0.570 [14.48]
1-147335-9 1-147435-9 0.580 [14.73]
2-147335-0 2-147435-0 0.590 [14.99]
2-147335-1 2-147435-1 0.600 [15.24]
Part Number Description
Square Square with Star Post Length
2-147335-2 2-147435-2 0.610 [15.49]
2-147335-3 2-147435-3 0.620 [15.75]
2-147335-4 2-147435-4 0.630 [16.00]
2-147335-5 2-147435-5 0.640 [16.26]
2-147335-6 2-147435-6 0.650 [16.51]
2-147335-7 2-147435-7 0.660 [16.76]
2-147335-8 2-147435-8 0.670 [17.02]
2-147335-9 2-147435-9 0.680 [17.27]
3-147335-0 3-147435-0 0.690 [17.53]
3-147335-1 3-147435-1 0.700 [17.78]
3-147335-2 3-147435-2 0.710 [18.03]
3-147335-3 3-147435-3 0.720 [18.29]
3-147335-4 3-147435-4 0.730 [18.54]
3-147335-5 3-147435-5 0.740 [18.80]
3-147335-6 3-147435-6 0.750 [19.05]
3-147335-7 3-147435-7 0.760 [19.30]
3-147335-8 3-147435-8 0.770 [19.56]
3-147335-9 3-147435-9 0.780 [19.81]
4-147335-0 4-147435-0 0.790 [20.07]
4-147335-1 4-147435-1 0.800 [20.32]
4-147335-2 4-147435-2 0.810 [20.57]
Part Number Description
Square Square with Star Post Length
4-147335-3 4-147435-3 0.820 [20.83]
4-147335-4 4-147435-4 0.830 [21.08]
4-147335-5 4-147435-5 0.840 [21.34]
4-147335-6 4-147435-6 0.850 [21.59]
4-147335-7 4-147435-7 0.860 [21.84]
4-147335-8 4-147435-8 0.870 [22.10]
4-147335-9 4-147435-9 0.880 [22.35]
5-147335-0 5-147435-0 0.890 [22.61]
5-147335-1 5-147435-1 0.900 [22.86]
5-147335-2 5-147435-2 0.910 [23.11]
5-147335-3 5-147435-3 0.920 [23.37]
5-147335-4 5-147435-4 0.930 [23.62]
5-147335-5 5-147435-5 0.940 [23.88]
5-147335-6 5-147435-6 0.950 [24.13]
5-147335-7 5-147435-7 0.960 [24.38]
5-147335-8 5-147435-8 0.970 [24.64]
5-147335-9 5-147435-9 0.980 [24.89]
6-147335-0 6-147435-0 0.990 [25.15]
6-147335-1 6-147435-1 1.000 [25.40]
166
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU .045 [1.14] Square Continuous Posts
.045 Square
Continuous Posts
TE now offers AMPMODU
.045 [1.14] Square
Continuous Posts. These
posts can be used instead
of the original posts that
come on a bandolier style
carrier strip. These posts
are on a reel, but the posts
are ‘notched’ at the desired
length (no carrier strip is
needed). This feature allows
more versatility by providing
post lengths from .400 to
1.000 [10.16 to 25.40],
available in increments of
.010 [0.25].
The posts are brass drawn
wire and are inserted into a
printed circuit board via
application tooling at any
centerline configuration.
They can be used for wire
wrap applications or mated
to a receptacle.
Potential industries include:
building systems,
commercial/home
equipment, household
appliances, home power
tools and equipment.
The current rating is 7 amps.
The posts are available
plated with tin, 15µ in. gold,
or 30µ in. gold. Other plat-
ings are available upon
request.
TE application tooling is a
modular head (Part Number
904640-1) placed on the
Modular Insertion System
Bench Machine (Part
Number 217600-1.)
Features of .045 [1.14]
Square Continuous Posts
■Brass drawn wire for posts
■.400 to 1.000 [10.16 to
25.40] overall pin length
(.010 [0.25] increments)
■Plating Options:
Tin
15µ in. gold
30µ in. gold
■Star feature also available
Benefits
■Less expensive than
bandolier style posts
■Can be placed on printed
circuit boards at any desired
centerline
■Less scrap material
(no carrier strip)
Technical Documents — page 276
Application Specification
114-13011
Note: All part numbers are RoHS compliant.
167
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
AMPMODU .045 [1.14] Square Continuous Posts (Continued)
Note: All part numbers are RoHS compliant.
.045 Square
Continuous Posts
Pre-Plated Tin
Part Number Description
Square Square with Star Post Length
147070-1 147436-1 0.400 [10.16]
147070-2 147436-2 0.410 [10.41]
147070-3 147436-3 0.420 [10.67]
147070-4 147436-4 0.430 [10.92]
147070-5 147436-5 0.440 [11.18]
147070-6 147436-6 0.450 [11.43]
147070-7 147436-7 0.460 [11.68]
147070-8 147436-8 0.470 [11.94]
147070-9 147436-9 0.480 [12.19]
1-147070-0 1-147436-0 0.490 [12.45]
1-147070-1 1-147436-1 0.500 [12.70]
1-147070-2 1-147436-2 0.510 [12.95]
1-147070-3 1-147436-3 0.520 [13.21]
1-147070-4 1-147436-4 0.530 [13.46]
1-147070-5 1-147436-5 0.540 [13.72]
1-147070-6 1-147436-6 0.550 [13.97]
1-147070-7 1-147436-7 0.560 [14.22]
1-147070-8 1-147436-8 0.570 [14.48]
1-147070-9 1-147436-9 0.580 [14.73]
2-147070-0 2-147436-0 0.590 [14.99]
2-147070-1 2-147436-1 0.600 [15.24]
Part Number Description
Square Square with Star Post Length
2-147070-2 2-147436-2 0.610 [15.49]
2-147070-3 2-147436-3 0.620 [15.75]
2-147070-4 2-147436-4 0.630 [16.00]
2-147070-5 2-147436-5 0.640 [16.26]
2-147070-6 2-147436-6 0.650 [16.51]
2-147070-7 2-147436-7 0.660 [16.76]
2-147070-8 2-147436-8 0.670 [17.02]
2-147070-9 2-147436-9 0.680 [17.27]
3-147070-0 3-147436-0 0.690 [17.53]
3-147070-1 3-147436-1 0.700 [17.78]
3-147070-2 3-147436-2 0.710 [18.03]
3-147070-3 3-147436-3 0.720 [18.29]
3-147070-4 3-147436-4 0.730 [18.54]
3-147070-5 3-147436-5 0.740 [18.80]
3-147070-6 3-147436-6 0.750 [19.05]
3-147070-7 3-147436-7 0.760 [19.30]
3-147070-8 3-147436-8 0.770 [19.56]
3-147070-9 3-147436-9 0.780 [19.81]
4-147070-0 4-147436-0 0.790 [20.07]
4-147070-1 4-147436-1 0.800 [20.32]
4-147070-2 4-147436-2 0.810 [20.57]
Part Number Description
Square Square with Star Post Length
4-147070-3 4-147436-3 0.820 [20.83]
4-147070-4 4-147436-4 0.830 [21.08]
4-147070-5 4-147436-5 0.840 [21.34]
4-147070-6 4-147436-6 0.850 [21.59]
4-147070-7 4-147436-7 0.860 [21.84]
4-147070-8 4-147436-8 0.870 [22.10]
4-147070-9 4-147436-9 0.880 [22.35]
5-147070-0 5-147436-0 0.890 [22.61]
5-147070-1 5-147436-1 0.900 [22.86]
5-147070-2 5-147436-2 0.910 [23.11]
5-147070-3 5-147436-3 0.920 [23.37]
5-147070-4 5-147436-4 0.930 [23.62]
5-147070-5 5-147436-5 0.940 [23.88]
5-147070-6 5-147436-6 0.950 [24.13]
5-147070-7 5-147436-7 0.960 [24.38]
5-147070-8 5-147436-8 0.970 [24.64]
5-147070-9 5-147436-9 0.980 [24.89]
6-147070-0 6-147436-0 0.990 [25.15]
6-147070-1 6-147436-1 1.000 [25.40]
Pre-Plated 15µ in. Gold
Part Number Description
Square Square with Star Post Length
147071-1 147437-1 0.400 [10.16]
147071-2 147437-2 0.410 [10.41]
147071-3 147437-3 0.420 [10.67]
147071-4 147437-4 0.430 [10.92]
147071-5 147437-5 0.440 [11.18]
147071-6 147437-6 0.450 [11.43]
147071-7 147437-7 0.460 [11.68]
147071-8 147437-8 0.470 [11.94]
147071-9 147437-9 0.480 [12.19]
1-147071-0 1-147437-0 0.490 [12.45]
1-147071-1 1-147437-1 0.500 [12.70]
1-147071-2 1-147437-2 0.510 [12.95]
1-147071-3 1-147437-3 0.520 [13.21]
1-147071-4 1-147437-4 0.530 [13.46]
1-147071-5 1-147437-5 0.540 [13.72]
1-147071-6 1-147437-6 0.550 [13.97]
1-147071-7 1-147437-7 0.560 [14.22]
1-147071-8 1-147437-8 0.570 [14.48]
1-147071-9 1-147437-9 0.580 [14.73]
2-147071-0 2-147437-0 0.590 [14.99]
2-147071-1 2-147437-1 0.600 [15.24]
Part Number Description
Square Square with Star Post Length
2-147071-2 2-147437-2 0.610 [15.49]
2-147071-3 2-147437-3 0.620 [15.75]
2-147071-4 2-147437-4 0.630 [16.00]
2-147071-5 2-147437-5 0.640 [16.26]
2-147071-6 2-147437-6 0.650 [16.51]
2-147071-7 2-147437-7 0.660 [16.76]
2-147071-8 2-147437-8 0.670 [17.02]
2-147071-9 2-147437-9 0.680 [17.27]
3-147071-0 3-147437-0 0.690 [17.53]
3-147071-1 3-147437-1 0.700 [17.78]
3-147071-2 3-147437-2 0.710 [18.03]
3-147071-3 3-147437-3 0.720 [18.29]
3-147071-4 3-147437-4 0.730 [18.54]
3-147071-5 3-147437-5 0.740 [18.80]
3-147071-6 3-147437-6 0.750 [19.05]
3-147071-7 3-147437-7 0.760 [19.30]
3-147071-8 3-147437-8 0.770 [19.56]
3-147071-9 3-147437-9 0.780 [19.81]
4-147071-0 4-147437-0 0.790 [20.07]
4-147071-1 4-147437-1 0.800 [20.32]
4-147071-2 4-147437-2 0.810 [20.57]
Part Number Description
Square Square with Star Post Length
4-147071-3 4-147437-3 0.820 [20.83]
4-147071-4 4-147437-4 0.830 [21.08]
4-147071-5 4-147437-5 0.840 [21.34]
4-147071-6 4-147437-6 0.850 [21.59]
4-147071-7 4-147437-7 0.860 [21.84]
4-147071-8 4-147437-8 0.870 [22.10]
4-147071-9 4-147437-9 0.880 [22.35]
5-147071-0 5-147437-0 0.890 [22.61]
5-147071-1 5-147437-1 0.900 [22.86]
5-147071-2 5-147437-2 0.910 [23.11]
5-147071-3 5-147437-3 0.920 [23.37]
5-147071-4 5-147437-4 0.930 [23.62]
5-147071-5 5-147437-5 0.940 [23.88]
5-147071-6 5-147437-6 0.950 [24.13]
5-147071-7 5-147437-7 0.960 [24.38]
5-147071-8 5-147437-8 0.970 [24.64]
5-147071-9 5-147437-9 0.980 [24.89]
6-147071-0 6-147437-0 0.990 [25.15]
6-147071-1 6-147437-1 1.000 [25.40]
Pre-Plated 30µ in. Gold
Part Number Description
Square Square with Star Post Length
147072-1 147438-1 0.400 [10.16]
147072-2 147438-2 0.410 [10.41]
147072-3 147438-3 0.420 [10.67]
147072-4 147438-4 0.430 [10.92]
147072-5 147438-5 0.440 [11.18]
147072-6 147438-6 0.450 [11.43]
147072-7 147438-7 0.460 [11.68]
147072-8 147438-8 0.470 [11.94]
147072-9 147438-9 0.480 [12.19]
1-147072-0 1-147438-0 0.490 [12.45]
1-147072-1 1-147438-1 0.500 [12.70]
1-147072-2 1-147438-2 0.510 [12.95]
1-147072-3 1-147438-3 0.520 [13.21]
1-147072-4 1-147438-4 0.530 [13.46]
1-147072-5 1-147438-5 0.540 [13.72]
1-147072-6 1-147438-6 0.550 [13.97]
1-147072-7 1-147438-7 0.560 [14.22]
1-147072-8 1-147438-8 0.570 [14.48]
1-147072-9 1-147438-9 0.580 [14.73]
2-147072-0 2-147438-0 0.590 [14.99]
2-147072-1 2-147438-1 0.600 [15.24]
Part Number Description
Square Square with Star Post Length
2-147072-2 2-147438-2 0.610 [15.49]
2-147072-3 2-147438-3 0.620 [15.75]
2-147072-4 2-147438-4 0.630 [16.00]
2-147072-5 2-147438-5 0.640 [16.26]
2-147072-6 2-147438-6 0.650 [16.51]
2-147072-7 2-147438-7 0.660 [16.76]
2-147072-8 2-147438-8 0.670 [17.02]
2-147072-9 2-147438-9 0.680 [17.27]
3-147072-0 3-147438-0 0.690 [17.53]
3-147072-1 3-147438-1 0.700 [17.78]
3-147072-2 3-147438-2 0.710 [18.03]
3-147072-3 3-147438-3 0.720 [18.29]
3-147072-4 3-147438-4 0.730 [18.54]
3-147072-5 3-147438-5 0.740 [18.80]
3-147072-6 3-147438-6 0.750 [19.05]
3-147072-7 3-147438-7 0.760 [19.30]
3-147072-8 3-147438-8 0.770 [19.56]
3-147072-9 3-147438-9 0.780 [19.81]
4-147072-0 4-147438-0 0.790 [20.07]
4-147072-1 4-147438-1 0.800 [20.32]
4-147072-2 4-147438-2 0.810 [20.57]
Part Number Description
Square Square with Star Post Length
4-147072-3 4-147438-3 0.820 [20.83]
4-147072-4 4-147438-4 0.830 [21.08]
4-147072-5 4-147438-5 0.840 [21.34]
4-147072-6 4-147438-6 0.850 [21.59]
4-147072-7 4-147438-7 0.860 [21.84]
4-147072-8 4-147438-8 0.870 [22.10]
4-147072-9 4-147438-9 0.880 [22.35]
5-147072-0 5-147438-0 0.890 [22.61]
5-147072-1 5-147438-1 0.900 [22.86]
5-147072-2 5-147438-2 0.910 [23.11]
5-147072-3 5-147438-3 0.920 [23.37]
5-147072-4 5-147438-4 0.930 [23.62]
5-147072-5 5-147438-5 0.940 [23.88]
5-147072-6 5-147438-6 0.950 [24.13]
5-147072-7 5-147438-7 0.960 [24.38]
5-147072-8 5-147438-8 0.970 [24.64]
5-147072-9 5-147438-9 0.980 [24.89]
6-147072-0 6-147438-0 0.990 [25.15]
6-147072-1 6-147438-1 1.000 [25.40]
168
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies, Horizontal Mount
Horizontal Mount,
Receptacle Assemblies
Product Facts
■All receptacle assemblies
are end stackable
■Contact design employs
dual cantilever beams with
built-in anti-overstress
feature
■Closed entry housings help
prevent post stubbing
■Wide range of sizes
available
■Other versions available
upon request
■Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94V-O rated
■Duplex gold and matte tin
plated contacts have full
nickel underplate
■Housings feature PC board
standoffs
■Solder tails accommodate
a PC board thickness of
.062 [1.57]
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Mechanical Characteristics
Mating Force — 6.0 oz. [1.67N] per
contact (max.)
Unmating Force — .75 oz. [0.21N]
per contact (min.) during third mating
cycle
Durability — 200 cycles
Environmental Characteristics
Operating Temperature —
-65°C to +125°C
Electrical Characteristics
Current Rating — 3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance — 12 milliohms
(max.)
Insulation Resistance —
5000 megohms (min.) between adjacent
contacts
Dielectric Withstanding Voltage
(at sea level) — 750 V rms
Horizontal Mount receptacle
assemblies are designed to
reliably and economically
meet the packaging and
interconnection require-
ments of today’s electronics
industry, generally for appli-
cations using the
mother/daughter board
arrangement.
This product line is offered
in both single and double
row configurations. The
.100 [2.54] centerline
assemblies are available in
a wide range of position
sizes. They have end
stacking capability which
gives the added advantage
of flexibility.
The housings are made of
high temperature, surface
mount compatible thermo-
plastic material that is 94V-0
rated. Contacts are phos-
phor bronze, fully under-
plated with nickel to help
prevent corrosion and are
available in three plating
options.
The receptacle contact is
an established proven
design with a fully enclosed,
one-piece “box” to protect
the contact area. In
addition, the receptacle
contact has dual cantilever
beams with a built-in
anti-overstress feature.
Standard solder tails
accommodate a board
thickness of .062 [1.57].
R
R
169
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod II Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Horizontal Mount,
Receptacle Assemblies
.320
[8.13]
A
B
.050
[1.27]
(2 Plc.)
.069
[1.75]
.100
[2.54]
Typ.
.137
[3.48]
Pos. Ref.
12
.115
[2.92]
Post
Entry
.125
[3.18]
.310
[7.87]
.174 Max.
[4.42]
(Point-of-Contact)
(Localized Gold
Plate Area)
C
LC
L
B
.100* Typ.
[2.54]
PC Board
(Ref.)
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
.035±.003
[0.89±0.08]
.060+.005
.060
-.000
1.52+.0.13
-.000
.310
[7.87]
[]
Dia.
Typ.
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
2.200 [5.08] .100 [2.54] 5535676-1 5146139-1 5535677-1
3.300 [7.62] .200 [5.08] 5535676-2 5146139-2 5535677-2
4.400 [10.16] .300 [7.62] 5535676-3 5146139-3 5535677-3
5.500 [12.70] .400 [10.16] 5535676-4 5146139-4 5535677-4
6.600 [15.24] .500 [12.70] 5535676-5 5146139-5 5535677-5
7.700 [17.78] .600 [15.24] 5535676-6 5146139-6 5535677-6
8.800 [20.32] .700 [17.78] 5535676-7 5146139-7 5535677-7
9.900 [22.86] .800 [20.32] 5535676-8 5146139-8 5535677-8
10 1.000 [25.40] .900 [22.86] 5535676-9 5146139-9 5535677-9
11 1.100 [27.94] 1.000 [25.40] 1-5535676-0 1-5146139-0 1-5535677-0
12 1.200 [30.48] 1.100 [27.94] 1-5535676-1 1-5146139-1 1-5535677-1
13 1.300 [33.02] 1.200 [30.48] 1-5535676-2 1-5146139-2 1-5535677-2
14 1.400 [35.56] 1.300 [33.02] 1-5535676-3 1-5146139-3 1-5535677-3
15 1.500 [38.10] 1.400 [35.56] 1-5535676-4 1-5146139-4 1-5535677-4
16 1.600 [40.64] 1.500 [38.10] 1-5535676-5 1-5146139-5 1-5535677-5
17 1.700 [43.18] 1.600 [40.64] 1-5535676-6 1-5146139-6 1-5535677-6
18 1.800 [45.72] 1.700 [43.18] 1-5535676-7 1-5146139-7 1-5535677-7
19 1.900 [48.26] 1.800 [45.72] 1-5535676-8 1-5146139-8 1-5535677-8
20 2.000 [50.80] 1.900 [48.26] 1-5535676-9 1-5146139-9 1-5535677-9
30 3.000 [76.20] 2.900 [73.66] 2-5535676-9 2-5146139-9 2-5535677-9
40 4.000 [101.60] 3.900 [99.06] 3-5535676-9 3-5146139-9 3-5535677-9
Note: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plug
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 168
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
170
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod II Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerlines
Note: All part numbers are RoHS compliant.
Horizontal Mount,
Receptacle Assemblies
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 168
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
.320
[8.13]
A
B
.050
[1.27]
(2 Plc.)
.069
[1.75]
.100
[2.54]
Typ.
12
.100
[2.54]
.310
[7.87]
.238
[6.05]
.174 Max.
[4.42]
(Point-of-Contact)
(Localized Gold
Plate Area)
Post
Entry
C
LC
L
B
.100* T
yp.
[2.54]
PC Board
(Ref.)
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
.035±.003
[0.89±0.08]
.060+.005
.060
-.000
1.52+0.13
-.000
.310
[7.87]
Dia.
Typ.
.115
[2.92]
.125
[3.18]
(Localized Gold
Plate Area)
.118
[3.00]
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
4.200 [5.08] .100 [2.54] 6-5535512-1 5146140-1 6-5102084-4
6.300 [7.62] .200 [5.08] 6-5535512-2 5146140-2 6-5102084-3
8.400 [10.16] .300 [7.62] 6-5535512-3 5146140-3 6-5102084-2
10 .500 [12.70] .400 [10.16] 6-5535512-4 5146140-4 6-5102084-1
12 .600 [15.24] .500 [12.70] 5535512-1 5146140-5 6-5102084-0
14 .700 [17.78] .600 [15.24] 1-5535512-7 5146140-6 5-5102084-9
16 .800 [20.32] .700 [17.78] 1-5535512-8 5146140-7 5-5102084-8
18 .900 [22.86] .800 [20.32] 1-5535512-6 5146140-8 5-5102084-7
20 1.000 [25.40] .900 [22.86] 5535512-2 5146140-9 5-5102084-6
22 1.100 [27.94] 1.000 [25.40] 1-5535512-9 1-5146140-0 5-5102084-5
24 1.200 [30.48] 1.100 [27.94] 5535512-3 1-5146140-1 5-5102084-4
26 1.300 [33.02] 1.200 [30.48] 2-5535512-0 1-5146140-2 5-5102084-3
28 1.400 [35.56] 1.300 [33.02] 2-5535512-1 1-5146140-3 5-5102084-2
30 1.500 [38.10] 1.400 [35.56] 2-5535512-2 1-5146140-4 5-5102084-1
32 1.600 [40.64] 1.500 [38.10] 2-5535512-3 1-5146140-5 5-5102084-0
34 1.700 [43.18] 1.600 [40.64] 5535512-4 1-5146140-6 4-5102084-9
36 1.800 [45.72] 1.700 [43.18] 5535512-5 1-5146140-7 4-5102084-8
38 1.900 [48.26] 1.800 [45.72] 2-5535512-4 1-5146140-8 4-5102084-7
40 2.000 [50.80] 1.900 [48.26] 2-5535512-5 1-5146140-9 4-5102084-6
50 2.500 [63.50] 2.400 [60.96] 5535512-7 2-5146140-0 4-5102084-1
60 3.000 [76.20] 2.900 [73.66] 3-5535512-0 2-5146140-1 3-5102084-6
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. .256 [6.50] minimum positive pin stop to prevent shorting between row.
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
]
[
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
Pos. Ref.
171
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod II Surface Mount Horizontal Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline
Horizontal Mount,
Receptacle Assemblies
Product Facts
■Surface mount leads
■All receptacle assemblies
are end stackable
■Contact design employs
dual cantilever beams
with built-in anti-overstress
feature
■Closed entry housings help
prevent post stubbing
■Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94 V-0 rated
■Duplex gold and matte tin
plated contacts have full
nickel underplate
■Housings feature PC board
standoffs
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Horizontal surface mount
receptacle assemblies are
designed to reliably and
economically meet the
packaging and interconnec-
tion requirements of today’s
electronics industry as
process technologies evolve
from wave soldering to sur-
face mount processing.
This broad product line is
offered in both single and
double row configurations.
The .100 [2.54] centerline
assemblies are available in
2-40 (single row) positions
and 4-80 (double row)
positions. Housings are
end stackable, which gives
the advantage of added
flexibility.
The housings are made of
high temperature material
that is 94V-0 rated. Contacts
are phosphor bronze, fully
underplated with nickel to
help prevent corrosion and
are available in three plating
options.
The receptacle contact is
an established proven
design, with a fully enclosed
one-piece "box" to protect
the contact beams with
built-in anti-overstress
feature.
Performance
Characteristics
Mechanical Characteristics
Mating Force — 6.0 oz. [1.67N] per
contact (max.)
Unmating Force — .75 oz. [0.21N]
per contact (min.) during third mating
cycle
Durability — 200 cycles
Environmental Characteristics
Operating Temperature —
-65°C to +125°C
Electrical Characteristics
Current Rating — 3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance — 12 milliohms
(max.)
Insulation Resistance — 5000
megohms (min.) between adjacent
contacts
Dielectric Withstanding Voltage
(at sea level) — 750 V rms
R
R
172
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod II Receptacle Assemblies, Single-Row, Surface Mount
.100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Horizontal Mount,
Receptacle Assemblies
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plug
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 171
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
A
.050
[1.27]
X
Section X–X
X
.100
[2.54]
T
yp.
.008
.005
[0.20]
[0.13]
Typ.
.100
[2.54]
T
yp.
.320
[8.13]
.174 Max.
[4.42]
(Point-of-Contact)
.060 Typ.
[1.52]
.090 Typ.
[2.29]
.069
[1.75]
.137
[3.48]
.356
[9.04]
.388±.010
[9.85±0.25]
Pos. No.
Ref. Typ.
No. of Dimension Contact Plating/Part Nos.
Pos. A Plating A Plating B Plating C
2.200 [5.08] 5147721-1 5147732-1 5147733-1
3.300 [7.62] 5147721-2 5147732-2 5147733-2
4.400 [10.16] 5147721-3 5147732-3 5147733-3
5.500 [12.70] 5147721-4 5147732-4 5147733-4
6.600 [15.24] 5147721-5 5147732-5 5147733-5
7.700 [17.78] 5147721-6 5147732-6 5147733-6
8.800 [20.32] 5147721-7 5147732-7 5147733-7
9.900 [22.86] 5147721-8 5147732-8 5147733-8
10 1.000 [25.40] 5147721-9 5147732-9 5147733-9
11 1.100 [27.94] 1-5147721-0 1-5147732-0 1-5147733-0
12 1.200 [30.48] 1-5147721-1 1-5147732-1 1-5147733-1
13 1.300 [33.02] 1-5147721-2 1-5147732-2 1-5147733-2
14 1.400 [35.56] 1-5147721-3 1-5147732-3 1-5147733-3
15 1.500 [38.10] 1-5147721-4 1-5147732-4 1-5147733-4
16 1.600 [40.64] 1-5147721-5 1-5147732-5 1-5147733-5
17 1.700 [43.18] 1-5147721-6 1-5147732-6 1-5147733-6
18 1.800 [45.72] 1-5147721-7 1-5147732-7 1-5147733-7
19 1.900 [48.26] 1-5147721-8 1-5147732-8 1-5147733-8
20 2.000 [50.80] 1-5147721-9 1-5147732-9 1-5147733-9
30 3.000 [76.20] 2-5147721-9 2-5147732-9 2-5147733-9
40 4.000[101.60] 3-5147721-9 3-5147732-9 3-5147733-9
Recommended Etched Circuit Layout
(for .040 [1.02] min. thick PC Board;
.008 [0.20] thick stencil)
(Localized Gold
Plate Area)
.125
[3.18]
173
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
No. of Dimension Contact Plating/Part Nos.
Pos. A Plating A Plating B Plating C
4.200 [5.08] 5147722-1 5147734-1 5147735-1
6.300 [7.62] 5147722-2 5147734-2 5147735-2
8.400 [10.16] 5147722-3 5147734-3 5147735-3
10 .500 [12.70] 5147722-4 5147734-4 5147735-4
12 .600 [15.24] 5147722-5 5147734-5 5147735-5
14 .700 [17.78] 5147722-6 5147734-6 5147735-6
16 .800 [20.32] 5147722-7 5147734-7 5147735-7
18 .900 [22.86] 5147722-8 5147734-8 5147735-8
20 1.000 [25.40] 5147722-9 5147734-9 5147735-9
22 1.100 [27.94] 1-5147722-0 1-5147734-0 1-5147735-0
24 1.200 [30.48] 1-5147722-1 1-5147734-1 1-5147735-1
26 1.300 [33.02] 1-5147722-2 1-5147734-2 1-5147735-2
28 1.400 [35.56] 1-5147722-3 1-5147734-3 1-5147735-3
30 1.500 [38.10] 1-5147722-4 1-5147734-4 1-5147735-4
32 1.600 [40.64] 1-5147722-5 1-5147734-5 1-5147735-5
34 1.700 [43.18] 1-5147722-6 1-5147734-6 1-5147735-6
36 1.800 [45.72] 1-5147722-7 1-5147734-7 1-5147735-7
38 1.900 [48.26] 1-5147722-8 1-5147734-8 1-5147735-8
40 2.000 [50.80] 1-5147722-9 1-5147734-9 1-5147735-9
50 2.500 [63.50] 2-5147722-4 2-5147734-4 2-5147735-4
60 3.000 [76.20] 2-5147722-9 2-5147734-9 2-5147735-9
Mod II Receptacle Assemblies, Double-Row, Surface Mount
.100 [2.54] Centerline
Note: All part numbers are RoHS
compliant.
Horizontal Mount,
Receptacle Assemblies
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 171
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
A.050
[1.27]
Ref.
.256
[6.51]
Post
Stop
.238
[6.05]
.100
[2.54]
Typ.
.008
.005
[0.20]
[0.13]
Typ.
.100
[2.54]
Typ.
.320
[8.13]
.174 Max.
[4.42]
(Point-of-Contact)
.060 T
yp.
[1.52]
.090 Typ.
[2.29]
.069
[1.75]
.100
[2.54]
.356
[9.04]
.388±.010
[9.85±0.25]
(Localized Gold
Plate Area)
.118
[3.00]
(Localized Gold
Plate Area)
.125
[3.18]
Recommended Etched Circuit Layout
(for .040 [1.02] min thick PC Board;
.008 [0.20] thick stencil)
174
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies, Vertical Mount
Vertical Mount,
Receptacle Assemblies
Product Facts
■Dual-cantilever beam
contact with box design
■Single-row assemblies
have .100 [2.54] centerline
contact spacing; double-row
assemblies have .100 x .100
[2.54 x 2.54] centerline
contact spacing
■3 through 40 positions in
single-row assemblies;
2 through 80 positions in
double-row assemblies
■Mod II Standard .340 [8.64]
and Mod IV low
.265 [6.73] profiles
■Mod II and Mod IV profiles
available in dual entry
■Duplex gold and matte tin
plated contacts have full
nickel underplate
■Thermoplastic housings,
94V-0 rated
■Standoffs for easy flux
cleaning
■All throughhole assemblies
are end stackable
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Mechanical Characteristics
Mating Force — 9.0 oz. [2.5N] per
contact (max.)
Unmating Force — 1.5 oz. [0.42N]
per contact (min.)
Durability (Tested to) — 200 cycles
Environmental Characteristics
Operating Temperature —
-65°C to +125°C
Electrical Characteristics
Current Rating — 3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance — 12 milliohms
(max.)
Insulation Resistance — 5000
megohms (min.) between adjacent
contacts
Dielectric Withstanding Voltage
(at sea level) — 750 V rms
Vertical receptacle
assemblies are designed to
reliably and economically
meet the packaging and
interconnection
requirements of today’s
electronics industry.
This broad product line
offers a wide variety of
assembly styles and
features. They are available
in dual entry style, in both
single and double row
configurations. The .100
[2.54] centerline assemblies
are available in 3-40 (single
row) positions and 2-80
(double row) positions.
Standard and low profile
housings which are end
stackable also enhance the
product line giving the
advantage of added
flexibility.
The housings are made of
flame retardant material that
is 94 V-0 rated. Contacts
are phosphor bronze, fully
underplated with nickel to
help prevent corrosion and
are available in three plating
options.
The receptacle contact is
an established proven
design, with a fully enclosed
one-piece “box” to protect
the contact beams.
These assemblies are
offered in .265 [6.73]
(Mod IV) and .340[8.64]
(Mod II) high profiles.
Standard solder tails
accommodate board
thickness of .062 [1.57].
Product styles include
single and dual tine
variations. Outrigger tine
styles are also available for
bottom entry parallel board
stacking applications.
R
R
175
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod II Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
3.300 [7.62] .200 [5.08] 5-534237-1 5-146386-1 5-146763-5
4.400 [10.16] .300 [7.62] 5-534237-2 6-146386-9 5-146763-6
5.500 [12.70] .400 [10.16] 5-534237-3 5-146386-2 5-146763-7
6.600 [15.24] .500 [12.70] 5-534237-4 5-146386-3 5-146763-8
7.700 [17.78] .600 [15.24] 5-534237-5 5-146386-4 5-146763-1
8.800 [20.32] .700 [17.78] 5-534237-6 5-146386-5 5-146763-2
9.900 [22.86] .800 [20.32] 5-534237-7 5-146386-6 5-146763-9
10 1.000 [25.40] .900 [22.86] 5-534237-8 5-146386-7 5-146763-3
11 1.100 [27.94] 1.000 [25.40] 5-534237-9 5-146386-8 6-146763-0
12 1.200 [30.48] 1.100 [27.94] 6-534237-0 5-146386-9 6-146763-1
13 1.300 [33.02] 1.200 [30.48] 6-534237-1 6-146386-0 6-146763-2
14 1.400 [35.56] 1.300 [33.02] 6-534237-2 6-146386-1 6-146763-3
15 1.500 [38.10] 1.400 [35.56] 6-534237-3 7-146386-0 6-146763-4
16 1.600 [40.64] 1.500 [38.10] 6-534237-4 7-146386-1 6-146763-5
17 1.700 [43.18] 1.600 [40.64] 6-534237-5 7-146386-2 6-146763-6
18 1.800 [45.72] 1.700 [43.18] 6-534237-6 7-146386-3 6-146763-7
19 1.900 [48.26] 1.800 [45.72] 6-534237-7 7-146386-4 6-146763-8
20 2.000 [50.80] 1.900 [48.26] 6-534237-8 6-146386-2 6-146763-9
30 3.000 [76.20] 2.900 [73.66] 7-534237-8 6-146386-8 7-146763-8
40 4.000 [101.60] 3.900 [99.06] 8-534237-8 8-146386-8 8-146763-8
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Closed Top Entry,
End Stackable, with
Single Tine Contacts
.340
[8.64]
A
B
.100±.003
[2.54±0.08]
.140
[3.56]
.050
[1.27]
Max.
T
yp.
.115
[2.92]
Ref.
.107
[2.72]
(Localized Gold
Plate Area)
Point of
Contact
.148
[3.76]
X
X
Recommended PC Board Hole Layout
.100
[2.54]
.035±.003
[0.89±0.08]
.020
[0.51]
(Standoffs)
Dia.
Typ.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
Keying Plug
176
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod II Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
2.100 [2.54] — 5-534206-1 5-147424-1 5-146762-8
4.200 [5.08] .100 [2.54] 5-534206-2 5-147424-2 5-146762-9
6.300 [7.62] .200 [5.08] 5-534206-3 5-147424-3 6-146762-0
8.400 [10.16] .300 [7.62] 5-534206-4 5-147424-4 5-146762-1
10 .500 [12.70] .400 [10.16] 5-534206-5 5-147424-5 5-146762-2
12 .600 [15.24] .500 [12.70] 5-534206-6 5-147424-6 6-146762-1
14 .700 [17.78] .600 [15.24] 5-534206-7 5-147424-7 6-146762-2
16 .800 [20.32] .700 [17.78] 5-534206-8 5-147424-8 6-146762-3
18 .900 [22.86] .800 [20.32] 5-534206-9 5-147424-9 5-146762-3
20 1.000 [25.40] .900 [22.86] 6-534206-0 6-147424-0 5-146762-7
22 1.100 [27.94] 1.000 [25.40] 6-534206-1 6-147424-1 6-146762-4
24 1.200 [30.48] 1.100 [27.94] 6-534206-2 6-147424-2 6-146762-5
26 1.300 [33.02] 1.200 [30.48] 6-534206-3 6-147424-3 6-146762-6
28 1.400 [35.56] 1.300 [33.02] 6-534206-4 6-147424-4 6-146762-7
30 1.500 [38.10] 1.400 [35.56] 6-534206-5 6-147424-5 5-146762-4
32 1.600 [40.64] 1.500 [38.10] 6-534206-6 6-147424-6 6-146762-8
34 1.700 [43.18] 1.600 [40.64] 6-534206-7 6-147424-7 6-146762-9
36 1.800 [45.72] 1.700 [43.18] 6-534206-8 6-147424-8 7-146762-0
38 1.900 [48.26] 1.800 [45.72] 6-534206-9 6-147424-9 7-146762-1
40 2.000 [50.80] 1.900 [48.26] 7-534206-0 7-147424-0 5-146762-5
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Closed Top Entry,
Side and End Stackable
.100 x .100 [2.54 x 2.54]
Centerline, .100 [2.54]
Tine Spacing
.340
[8.64]
A
.100±.003
[2.54±0.08]
.050
[1.27]
Max.
T
yp.
.148
[3.77]
T
yp.
.107
[2.72]
Typ.
B
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
.035±.003
[0.89±0.08]
.020
[0.51]
(Standoffs)
Dia.
.100
[2.54]
Typ.
.198
[5.03]
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
T
yp.
.115±.010
[2.92±0.25]
Ref.
Keying Plug
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
(Localized
Gold Plate
Area)
Point of
Contact
177
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
3.300 [7.62] .200 [5.08] 8-87879-7 5-147326-1 5-102742-4
4.400 [10.16] .300 [7.62] 8-87879-6 5-147326-2 5-102742-8
5.500 [12.70] .400 [10.16] 8-87879-8 5-147326-3 5-102742-9
6.600 [15.24] .500 [12.70] 5-87879-3 5-147326-4 6-102742-0
7.700 [17.78] .600 [15.24] 5-87879-4 5-147326-5 5-102742-7
8.800 [20.32] .700 [17.78] 5-87879-1 5-147326-6 5-102742-3
9.900 [22.86] .800 [20.32] 5-87879-5 5-147326-7 5-102742-6
10 1.000 [25.40] .900 [22.86] 5-87879-2 5-147326-8 6-102742-1
11 1.100 [27.94] 1.000 [25.40] 5-87879-6 5-147326-9 5-102742-1
12 1.200 [30.48] 1.100 [27.94] 5-87879-7 6-147326-0 5-102742-2
13 1.300 [33.02] 1.200 [30.48] 5-87879-8 6-147326-1 6-102742-2
14 1.400 [35.56] 1.300 [33.02] 5-87879-9 6-147326-2 6-102742-3
15 1.500 [38.10] 1.400 [35.56] 6-87879-0 6-147326-3 6-102742-4
16 1.600 [40.64] 1.500 [38.10] 6-87879-1 6-147326-4 5-102742-5
17 1.700 [43.18] 1.600 [40.64] 6-87879-2 6-147326-5 6-102742-5
18 1.800 [45.72] 1.700 [43.18] 6-87879-3 6-147326-6 6-102742-6
19 1.900 [48.26] 1.800 [45.72] 6-87879-4 6-147326-7 6-102742-7
20 2.000 [50.80] 1.900 [48.26] 6-87879-5 6-147326-8 6-102742-8
30 3.000 [76.20] 2.900 [73.66] 7-87879-5 7-147326-8 7-102742-8
40 4.000 [101.60] 3.900 [99.06] 8-87879-5 8-147326-8 8-102742-8
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and .062 for recommended board thickness.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Dual Entry, End Stackable,
Low Profile with Dual Tine
Contacts
Keying Plug
.247
[6.29]
.268
[6.79] Ref.
Typ.
.020
[0.51] Typ.
.050
[1.27]
2 Plcs.
.140
[3.56]
B
A
.100
[2.54]
A
A
.115
[2.92]
T
yp.
.108
[2.74]
Typ.
.148
[3.76]
T
yp.
Contact Typ.
Section A-A
Ø.067-.064
[1.70-1.63]
Typ.
Recommended PC Board Hole Layout
178
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
Closed Top Entry,
End Stackable, Low Profile
with Single Tine Contacts
.245
[6.22]
A
.100±.003
[2.54±0.08]
.148
[3.76]
.107
[2.72]
(Localized
Gold Plate
Area)
.125
[3.18]
Ref.
B
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
.020
[0.51]
(Standoffs)
.140
[3.56]
.100
[2.54]
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
3.300 [7.62] .200 [5.08] 5-535541-1 5-146138-1 5-535584-3
4.400 [10.16] .300 [7.62] 5-535541-2 5-146138-2 5-535584-4
5.500 [12.70] .400 [10.16] 5-535541-3 5-146138-3 5-535584-5
6.600 [15.24] .500 [12.70] 5-535541-4 5-146138-4 5-535584-1
7.700 [17.78] .600 [15.24] 5-535541-5 5-146138-5 5-535584-6
8.800 [20.32] .700 [17.78] 5-535541-6 5-146138-6 5-535584-7
9.900 [22.86] .800 [20.32] 5-535541-7 5-146138-7 5-535584-8
10 1.000 [25.40] .900 [22.86] 5-535541-8 5-146138-8 5-535584-9
11 1.100 [27.94] 1.000 [25.40] 5-535541-9 5-146138-9 6-535584-0
12 1.200 [30.48] 1.100 [27.94] 6-535541-0 6-146138-0 6-535584-1
13 1.300 [33.02] 1.200 [30.48] 6-535541-1 6-146138-1 6-535584-2
14 1.400 [35.56] 1.300 [33.02] 6-535541-2 6-146138-2 6-535584-3
15 1.500 [38.10] 1.400 [35.56] 6-535541-3 6-146138-3 6-535584-4
16 1.600 [40.64] 1.500 [38.10] 6-535541-4 6-146138-4 6-535584-5
17 1.700 [43.18] 1.600 [40.64] 6-535541-5 6-146138-5 6-535584-6
18 1.800 [45.72] 1.700 [43.18] 6-535541-6 6-146138-6 5-535584-2
19 1.900 [48.26] 1.800 [45.72] 6-535541-7 6-146138-7 6-535584-7
20 2.000 [50.80] 1.900 [48.26] 6-535541-8 6-146138-8 6-535584-8
30 3.000 [76.20] 2.900 [73.66] 7-535541-9 7-146138-9 6-535584-9
40 4.000 [101.60] 3.900 [99.06] 8-535541-9 8-146138-9 7-535584-0
Notes: 1. TE recommends mating gold or duplex plated headers with select gold plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
.050
[1.27]
Max.
Typ.
.035±.003
[0.88±0.08]
Dia.
Typ.
X
X
Section XX
Point of
Contact
179
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
2.100 [2.54] —
5-
534998-1
5-
535598-2
5-
535585-3
4.200 [5.08] .100 [2.54]
5-
534998-2
5-
535598-3
5-
535585-4
6.300 [7.62] .200 [5.08]
5-
534998-3
5-
535598-4
5-
535585-5
8.400 [10.16] .300 [7.62]
5-
534998-4
5-
535598-5
5-
535585-6
10 .500 [12.70] .400 [10.16]
5-
534998-5
5-
535598-6
5-
535585-1
12 .600 [15.24] .500 [12.70]
5-
534998-6
5-
535598-7
5-
535585-2
14 .700 [17.78] .600 [15.24]
5-
534998-7
5-
535598-1
5-
535585-7
16 .800 [20.32] .700 [17.78]
5-
534998-8
5-
535598-8
5-
535585-8
18 .900 [22.86] .800 [20.32]
5-
534998-9
5-
535598-9
5-
535585-9
20 1.000 [25.40] .900 [22.86] 6-534998-0 6-535598-0 6-535585-0
22 1.100 [27.94] 1.000 [25.40] 6-534998-1 6-535598-1 6-535585-1
24 1.200 [30.48] 1.100 [27.94] 6-534998-2 6-535598-2 6-535585-2
26 1.300 [33.02] 1.200 [30.48] 6-534998-3 6-535598-3 6-535585-3
28 1.400 [35.56] 1.300 [33.02] 6-534998-4 6-535598-4 6-535585-4
30 1.500 [38.10] 1.400 [35.56] 6-534998-5 6-535598-5 6-535585-5
32 1.600 [40.64] 1.500 [38.10] 6-534998-6 6-535598-6 6-535585-6
34 1.700 [43.18] 1.600 [40.64] 6-534998-7 6-535598-7 6-535585-7
36 1.800 [45.72] 1.700 [43.18] 6-534998-8 6-535598-8 6-535585-8
38 1.900 [48.26] 1.800 [45.72] 6-534998-9 6-535598-9 6-535585-9
40 2.000 [50.80] 1.900 [48.26] 7-534998-0 7-535598-0 7-535585-0
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Closed Top Entry,
End and Side Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.100 [2.54] Tine Spacing
.245
[6.22]
.100±.003
[2.540.08]
.198
[5.03]
Recommended PC Board Hole Layout
.020
[0.51]
(Standoffs)
B
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.050
[1.27]
Max.
T
yp.
.035±.003
[0.89±0.08] Dia.
.148
[3.77]
Typ.
.125±.010
[3.18±0.25]
Typ.
.107
[2.72]
Typ.
.100
[2.54]
Typ.
(Localized
Gold Plate
Area)
A
Point of
Contact
180
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
5
Mod IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
422.100 [53.34] 2.000 [50.80] 7-534998-1 7-535598-4 7-535585-4
442.200 [55.88] 2.100 [53.34] 7-534998-2 7-535598-5 7-535585-5
46 2.300 [58.42] 2.200 [55.88] 7-534998-3 7-535598-6 7-535585-6
48 2.400 [60.96] 2.300 [58.42] 7-534998-4 7-535598-7 7-535585-7
502.500 [63.50] 2.400 [60.96] 7-534998-5 7-535598-1 7-535585-1
522.600 [66.04] 2.500 [63.50] 7-534998-6 7-535598-8 7-535585-8
54 2.700 [68.58] 2.600 [66.04] 7-534998-7 7-535598-9 7-535585-9
56 2.800 [71.12] 2.700 [68.58] 7-534998-8 8-535598-0 8-535585-0
582.900 [73.66] 2.800 [71.12] 7-534998-9 8-535598-1 8-535585-1
60 3.000 [76.20] 2.900 [73.66] 8-534998-0 7-535598-2 7-535585-2
62 3.100 [78.74] 3.000 [76.20] 8-534998-1 8-535598-2 8-535585-2
643.200 [81.28] 3.100 [78.74] 8-534998-2 8-535598-3 8-535585-3
663.300 [83.82] 3.200 [81.28] 8-534998-3 8-535598-4 8-535585-4
68 3.400 [86.36] 3.300 [83.82] 8-534998-4 8-535598-5 8-535585-5
70 3.500 [88.90] 3.400 [86.36] 8-534998-5 8-535598-6 8-535585-6
723.600 [91.44] 3.500 [88.90] 8-534998-6 8-535598-7 8-535585-7
74 3.700 [93.98] 3.600 [91.44] 8-534998-7 8-535598-8 8-535585-8
76 3.800 [96.52] 3.700 [93.98] 8-534998-8 8-535598-9 8-535585-9
783.900 [99.06] 3.800 [96.52] 8-534998-9 9-535598-0 9-535585-0
804.000 [101.60] 3.900 [99.06] 9-534998-0 7-535598-3 7-535585-3
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plug
AMPMODU Interconnection System
181
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Assemblies, Single-Row, Outrigger Design
.100 x .100 [2.54 x 2.54] Centerline, End To End Stackable
Vertical Mount,
Receptacle Assemblies
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
3.300 [7.62] .200 [5.08] 5-147720-2 5-147726-2 5-147727-2
4.400 [10.16] .300 [7.62] 5-147720-3 5-147726-3 5-147727-3
5.500 [12.70] .400 [10.16] 5-147720-4 5-147726-4 5-147727-4
6.600 [15.24] .500 [12.70] 5-147720-5 5-147726-5 5-147727-5
7.700 [17.78] .600 [15.24] 5-147720-6 5-147726-6 5-147727-6
8.800 [20.32] .700 [17.78] 5-147720-7 5-147726-7 5-147727-7
9.900 [22.86] .800 [20.32] 5-147720-8 5-147726-8 5-147727-8
10 1.000 [25.40] .900 [22.86] 5-147720-9 5-147726-9 5-147727-9
11 1.100 [27.94] 1.000 [25.40] 6-147720-0 6-147726-0 6-147727-0
12 1.200 [30.48] 1.100 [27.94] 6-147720-1 6-147726-1 6-147727-1
13 1.300 [33.02] 1.200 [30.48] 6-147720-2 6-147726-2 6-147727-2
14 1.400 [35.56] 1.300 [33.02] 6-147720-3 6-147726-3 6-147727-3
15 1.500 [38.10] 1.400 [35.56] 6-147720-4 6-147726-4 6-147727-4
16 1.600 [40.64] 1.500 [38.10] 6-147720-5 6-147726-5 6-147727-5
17 1.700 [43.18] 1.600 [40.64] 6-147720-6 6-147726-6 6-147727-6
18 1.800 [45.72] 1.700 [43.18] 6-147720-7 6-147726-7 6-147727-7
19 1.900 [48.26] 1.800 [45.72] 6-147720-8 6-147726-8 6-147727-8
20 2.000 [50.80] 1.900 [48.26] 7-147720-8 7-147726-8 7-147727-8
30 3.000 [76.20] 2.900 [73.66] 8-147720-8 8-147726-8 8-147727-8
40 4.000 [101.60] 3.900 [99.06] 8-147720-9 8-147726-9 8-147727-9
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and add .062 [1.57] for recommended board thickness if used in
bottom entry application.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-0.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.245
[6.22]
.140
[3.56]
.075 +.005
-.000
[
1.90 +0.13
]
-.000
.140
[3.56]
.125±.010
[3.17±0.25]
Typ.
Recommended PC Board Hole Layout
.020
[0.51]
(Standoffs)
B
.100
[2.54]
Typ.
.053
[1.34]
T
yp.
.200
[5.08]
.035±.003
[0.89±0.08] Dia.
.200±.003
[5.08±0.08]
T
yp.
.100
[2.54]
Typ.
A
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.200 [5.08] Tine Spacing
.107
[2.72]
(Localized Gold
Plate Area)
.148
[3.77]
Typ.
Point of
Contact
Note: All part numbers are RoHS
compliant.
182
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Assemblies, Double-Row, Outrigger Design,
.100 x .100 [2.54 x 2.54] Centerline, End to End Stackable
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
2.100 [2.54] — 6-534267-3 5-147099-1 8-147100-9
4.200 [5.08] .100 [2.54] 6-534267-7 5-147099-2 9-147100-0
6.300 [7.62] .200 [5.08] 6-534267-4 5-147099-3 5-147100-1
8.400 [10.16] .300 [7.62] 5-534267-5 5-147099-4 5-147100-2
14 .700 [17.78] .600 [15.24] 5-534267-1 5-147099-7 5-147100-5
18 .900 [22.86] .800 [20.32] 6-534267-0 5-147099-9 5-147100-7
20 1.000 [25.40] .900 [22.86] 5-534267-2 6-147099-0 5-147100-8
24 1.200 [30.48] 1.100 [27.94] 5-534267-9 6-147099-2 6-147100-0
30 1.500 [38.10] 1.400 [35.56] 6-534267-2 6-147099-5 6-147100-3
36 1.800 [45.72] 1.700 [43.18] 6-534267-5 6-147099-8 6-147100-6
40 2.000 [50.80] 1.900 [48.26] 5-534267-7 7-147099-0 6-147100-8
48 2.400 [60.96] 2.300 [58.42] 6-534267-1 7-147099-4 7-147100-2
50 2.500 [63.50] 2.400 [60.96] 6-534267-8 7-147099-5 7-147100-3
60 3.000 [76.20] 2.900 [73.66] 5-534267-8 8-147099-0 7-147100-8
76 3.800 [96.52] 3.700 [93.98] 6-534267-6 8-147099-8 8-147100-6
80 4.000 [101.60] 3.900 [99.06] 5-534267-4 9-147099-0 8-147100-8
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the
maximum point-of-contact dimension and .062 for recommended board thickness if used in bottom entry
application.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult TE.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.300 [7.62] Tine Spacing
.245
[6.22]
T
yp.
.300
[7.62]
Typ.
A
.100±.003
[2.54±0.08]
.125±.010
[3.17±0.25]
.050
[1.27]
Max.
T
yp.
Recommended PC Board Hole Layout
.035±.003
[0.89±0.08]
.020
[0.51]
(Standoffs)
B
Dia.
Typ.
.100
[2.54]
Typ.
.100
[2.54]
Typ. .100
[2.54]
Typ.
.148
[3.77]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.198
[5.03]
Dia.
Typ.
.075+.005
.060
-0.00
1.90+0.13
-0.00
[]
Keying Plug
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
Point of
Contact
183
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Vertical Mount,
Receptacle Assemblies
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Closed Dual Entry, Side and
End Stackable Low Profile,
.100 x .100 [2.54 x 2.54]
Centerline, .150 [3.81] Tine
Spacing
.100±.003
[2.54±0.08]
.245
[6.22]
Typ.
.020
[0.51]
T
yp.
(Standoffs)
A
.198
[5.03]
.050
[1.27]
Max.
Typ. .150
[3.81]
T
yp.
.130±.010
[3.30±0.25]
Typ.
.148
[3.77]
Typ.
Point of
Contact
.107
[2.72]
T
yp.
(Localized Gold
Plate Area)
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
2.100 [2.54] — 5-535542-1 5-147095-1 5-147096-1
4.200 [5.08] .100 [2.54] 5-535542-2 5-147095-2 5-147096-2
6.300 [7.62] .200 [5.08] 5-535542-3 5-147095-3 5-147096-3
8.400 [10.16] .300 [7.62] 5-535542-4 5-147095-4 5-147096-4
10 .500 [12.70] .400 [10.16] 5-535542-5 5-147095-5 5-147096-5
12 .600 [15.24] .500 [12.70] 5-535542-6 5-147095-6 5-147096-6
14 .700 [17.78] .600 [15.24] 5-535542-7 5-147095-7 5-147096-7
16 .800 [20.32] .700 [17.78] 5-535542-8 5-147095-8 5-147096-8
18 .900 [22.86] .800 [20.32] 5-535542-9 5-147095-9 5-147096-9
20 1.000 [25.40] .900 [22.86] 6-535542-0 6-147095-0 6-147096-0
22 1.100 [27.94] 1.000 [25.40] 6-535542-1 6-147095-1 6-147096-1
24 1.200 [30.48] 1.100 [27.94] 6-535542-2 6-147095-2 6-147096-2
26 1.300 [33.02] 1.200 [30.48] 6-535542-3 6-147095-3 6-147096-3
28 1.400 [35.56] 1.300 [33.02] 6-535542-4 6-147095-4 6-147096-4
30 1.500 [38.10] 1.400 [35.56] 6-535542-5 6-147095-5 6-147096-5
32 1.600 [40.64] 1.500 [38.10] 6-535542-6 6-147095-6 6-147096-6
34 1.700 [43.18] 1.600 [40.64] 6-535542-7 6-147095-7 6-147096-7
36 1.800 [45.72] 1.700 [43.18] 6-535542-8 6-147095-8 6-147096-8
38 1.900 [48.26] 1.800 [45.72] 6-535542-9 6-147095-9 6-147096-9
40 2.000 [50.80] 1.900 [48.26] 7-535542-0 7-147095-0 7-147096-0
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bot-
tom entry application.
.100
[2.54]
.100*
[2.54]
Typ. .100
[2.54]
T
yp.
B
Recommended PC Board Hole Layout
for Bottom Entry or Pass Through Applications
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Recommended PC Board Hole Layout
for Top Entry
.035±.003
[0.89±0.08] Dia. Typ.
B
Dia.
T
yp.
.075+.005
.060
-.000
1.90+0.13
-0.00
[].100
[2.54]
Typ.
.150
[3.81]
Typ.
Note: All part numbers are RoHS
compliant.
184
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
No. of Dimensions Contact Plating/Part Nos.
Pos. ABPlating A Plating B Plating C
422.100 [53.34] 2.000 [50.80] 7-535542-1 7-147095-1 7-147096-1
442.200 [55.88] 2.100 [53.34] 7-535542-2 7-147095-2 7-147096-2
46 2.300 [58.42] 2.200 [55.88] 7-535542-3 7-147095-3 7-147096-3
48 2.400 [60.96] 2.300 [58.42] 7-535542-4 7-147095-4 7-147096-4
502.500 [63.50] 2.400 [60.96] 7-535542-5 7-147095-5 7-147096-5
522.600 [66.04] 2.500 [63.50] 7-535542-6 7-147095-6 7-147096-6
54 2.700 [68.58] 2.600 [66.04] 7-535542-7 7-147095-7 7-147096-7
56 2.800 [71.12] 2.700 [68.58] 7-535542-8 7-147095-8 7-147096-8
582.900 [73.66] 2.800 [71.12] 7-535542-9 7-147095-9 7-147096-9
60 3.000 [76.20] 2.900 [73.66] 8-535542-0 8-147095-0 8-147096-0
62 3.100 [78.74] 3.000 [76.20] 8-535542-1 8-147095-1 8-147096-1
643.200 [81.28] 3.100 [78.74] 8-535542-2 8-147095-2 8-147096-2
663.300 [83.82] 3.200 [81.28] 8-535542-3 8-147095-3 8-147096-3
68 3.400 [86.36] 3.300 [83.82] 8-535542-4 8-147095-4 8-147096-4
70 3.500 [88.90] 3.400 [86.36] 8-535542-5 8-147095-5 8-147096-5
723.600 [91.44] 3.500 [88.90] 8-535542-6 8-147095-6 8-147096-6
74 3.700 [93.98] 3.600 [91.44] 8-535542-7 8-147095-7 8-147096-7
76 3.800 [96.52] 3.700 [93.98] 8-535542-8 8-147095-8 8-147096-8
783.900 [99.06] 3.800 [96.52] 8-535542-9 8-147095-9 8-147096-9
804.000 [101.60] 3.900 [99.06] 9-535542-0 9-147095-0 9-147096-0
185
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Surface Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline
Surface Mount Receptacle
Assemblies
The AMPMODU 0.025 [0.64]
square interconnection
system is an industry
standard that has provided
level III and IV thru-hole
interconnections to almost
every industry and
marketplace for years.
As technology advances,
so has the AMPMODU
product line.
Surface mount vertical
receptacle assemblies are
available to meet your level
II packaging needs as
process technologies
evolve from wave soldering
to surface mount reflow
(infrared and vapor-phase)
processes. AMPMODU
surface mount receptacle
assemblies are offered in
vertical dual entry
configurations. These
receptacles are available in
single-row and double-row
configurations with a
contact centerline spacing
of .100 x .100 [2.54 x 2.54].
AMPMODU surface mount
vertical receptacle
assemblies continue to
provide the proven features
and benefits of their
thru-hole counterparts in the
AMPMODU product family.
Closed-entry style housing
design provides a lead-in
ramp for positive mating of
contacts, virtually eliminating
the possibility of stubbing.
The dual-beam receptacle
contact design, coupled with
gold plating in the contact
area, provides a reliable
interface. Tin plating on the
solder tails also enhances
solderability.
The incorporation of
compliant metallic hold
downs on receptacle
assemblies offers multiple
benefits. The hold downs
provide for proper lead-to-
pad registration and provide
retention to the PC board
prior to and during
processing. Used with a
plated thru-hole, the hold
downs are soldered during
the reflow process and
serve as a strain relief for
the solder joints during
mating/unmating.
The design of the hold
downs results in an
excellent ratio of
insertion/extraction forces
(into the PC board); 20 lb.
[89 N] maximum insertion
force per pair and 10 lb.
[44.5 N] minimum extraction
force per pair (unsoldered).
No tools are required for
insertion.
Product Facts
■Surface Mount Leads
■Contact Material:
phosphor bronze
■High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vapor-
phase reflow
■Gold/tin duplex plating
for reliable mating
interconnection and solder
interface
■Metallic hold downs provide
retention in the PC board
prior to and during the
reflow process … and strain
relief after soldering
■Hold downs provide for
proper lead-to-pad
registration
■Closed-entry receptacle
housings provide lead-in
ramp for positive mating
■Receptacle contacts employ
dual cantilever beams for
reliable connections
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.
File No. E28476
■Certified by
Canadian Standards
Association,
File No. LR 7189
R
R
186
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
5
Mod IV Surface Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Surface Mount Receptacle
Assemblies
Performance Specifications Voltage Rating: 250 VAC
Current Rating: 3.0 amperes (max.) for single contact;
2.0 amperes (max.) per contact when connector is fully energized
Operating Temperature Range (Receptacle Assemblies): –65°C to +125°C
Operating Temperature Range (Headers): -65°C to +105°C
Dielectric Withstanding Voltage: 750 VAC
Termination Resistance: 12 milliohms (max.)
Insulation Resistance: 5000 megohms (min.)
Mating Force (Receptacle Assemblies): 9.0 oz. [2.50N] (max.) per contact
Unmating Force (Receptacle Assemblies): 1.5 oz. [0.42N] (min.) per contact
Durability: Tested to 200 cycles (min.) for .000030 [0.00076] gold plated contacts
AMPMODU Interconnection System
187
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Assemblies, Single-Row, Surface Mount,
.100 [2.54] Centerline with Compliant Pin Hold Downs
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
Surface Mount, Single-Row,
Dual Entry with Compliant
Pin Holddowns
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
.265
[6.73]
T
yp.
.038
[0.97]
.020
[0.51]
.030 0.76
.025
[
0.64
]
Typ.
.140
[3.56]
.100
[2.54] Typ.
.107
[2.72]
(Localized Gold
Plate Area)
.208
[5.28] Max.
(Depressed)
.148
[3.77]
Point of
Contact
D
C
A
D
B
C
P.C. Board .069
[1.75]
.090
[2.28] T
yp.
.060
[1.52] Min.
.100
[2.54]
.040±.003
[1.02±0.08]
Dia. Typ.
(For bottom
entry or pass
thru applica-
tions)
.042±.003
[1.07±0.08] Dia.
.075
[1.91]
.110
[2.79]
.228
[5.78]
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
Packaged in Tubes Packaged in Tape & Reel
No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos.
Pos. ABCD
Plating A Plating B Plating C Plating A Plating B Plating C
3.500 [12.70] .200 [5.08] See note 3 .400 [10.16] 5-147744-1 5-147743-1 5-147742-1 5-147724-1 5-147730-1 5-147731-1
4.600 [15.24] .300 [7.62] See note 3 .500 [12.70] 5-147744-2 5-147743-2 5-147742-2 5-147724-2 5-147730-2 5-147731-2
5.700 [17.78] .400 [10.16] See note 3 .600 [15.24] 5-147744-3 5-147743-3 5-147742-3 5-147724-3 5-147730-3 5-147731-3
6.800 [20.32] .500 [12.70] See note 3 .700 [17.78] 5-147744-4 5-147743-4 5-147742-4 5-147724-4 5-147730-4 5-147731-4
7.900 [22.86] .600 [15.24] See note 3 .800 [20.32] 5-147744-5 5-147743-5 5-147742-5 5-147724-5 5-147730-5 5-147731-5
81.000 [25.40] .700 [17.78] See note 3 .900 [22.86] 5-147744-6 5-147743-6 5-147742-6 5-147724-6 5-147730-6 5-147731-6
91.100 [27.94] .800 [20.32] See note 3 1.000 [25.40] 5-147744-7 5-147743-7 5-147742-7 5-147724-7 5-147730-7 5-147731-7
10 1.200 [30.48] .900 [22.86] See note 3 1.100 [27.94] 5-147744-8 5-147743-8 5-147742-8 5-147724-8 5-147730-8 5-147731-8
11 1.300 [33.02] 1.000 [25.40] See note 3 1.200 [30.48] 5-147744-9 5-147743-9 5-147742-9 5-147724-9 5-147730-9 5-147731-9
12 1.400 [35.56] 1.100 [27.94] See note 3 1.300 [33.02] 6-147744-0 6-147743-0 6-147742-0 6-147724-0 6-147730-0 6-147731-0
13 1.500 [38.10] 1.200 [30.48] See note 3 1.400 [35.56] 6-147744-1 6-147743-1 6-147742-1 6-147724-1 6-147730-1 6-147731-1
14 1.600 [40.64] 1.300 [33.02] See note 3 1.500 [38.10] 6-147744-2 6-147743-2 6-147742-2 6-147724-2 6-147730-2 6-147731-2
15 1.700 [43.18] 1.400 [35.56] See note 3 1.600 [40.64] 6-147744-3 6-147743-3 6-147742-3 6-147724-3 6-147730-3 6-147731-3
16 1.800 [45.72] 1.500 [38.10] See note 3 1.700 [43.18] 6-147744-4 6-147743-4 6-147742-4 6-147724-4 6-147730-4 6-147731-4
17 1.900 [48.26] 1.600 [40.64] See note 3 1.800 [45.72] 6-147744-5 6-147743-5 6-147742-5 6-147724-5 6-147730-5 6-147731-5
18 2.000 [50.80] 1.700 [43.18] See note 3 1.900 [48.26] 6-147744-6 6-147743-6 6-147742-6 6-147724-6 6-147730-6 6-147731-6
19 2.100 [53.34] 1.800 [45.72] See note 3 2.000 [50.80] 6-147744-7 6-147743-7 6-147742-7 6-147724-7 6-147730-7 6-147731-7
20 2.200 [55.88] 1.900 [48.26] See note 3 2.100 [53.34] 6-147744-8 6-147743-8 6-147742-8 6-147724-8 6-147730-8 6-147731-8
30 3.200 [81.28] 2.900 [73.66] See note 3 3.100 [78.74] 7-147744-8 7-147743-8 7-147742-8 7-147724-8 7-147730-8 7-147731-8
40 4.300 [109.22] 4.100 [104.14] 2.100 [53.34] 4.200 [106.68] 8-147744-8 8-147743-8 8-147742-8 8-147724-8 8-147730-8 8-147731-8
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and
.062 [1.57] for recommended board thickness if used in bottom entry application
3. No center hold down.
.042±.003
[1.07±0.08] Dia.
.042±.003
[1.07±0.08] Dia.
Standoffs
Typ.
188
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54] x
.100 [2.54] Centerline End To End Stackable without Compliant Pin Holddowns
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
Surface Mount,Single-Row,
Dual Entry, End to End
Stackable
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
Packaged in Tubes Packaged in Tape & Reel
No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos.
Pos. AB
Plating A Plating B Plating C Plating A Plating B Plating C
3.300 [7.62] .200 [5.08] 5-147738-2 5-147737-2 5-147736-2 5-147723-2 5-147728-2 5-147729-2
4.400 [10.16] .300 [7.62] 5-147738-3 5-147737-3 5-147736-3 5-147723-3 5-147728-3 5-147729-3
5.500 [12.70] .400 [10.16] 5-147738-4 5-147737-4 5-147736-4 5-147723-4 5-147728-4 5-147729-4
6.600 [15.24] .500 [12.70] 5-147738-5 5-147737-5 5-147736-5 5-147723-5 5-147728-5 5-147729-5
7.700 [17.78] .600 [15.24] 5-147738-6 5-147737-6 5-147736-6 5-147723-6 5-147728-6 5-147729-6
8.800 [20.32] .700 [17.78] 5-147738-7 5-147737-7 5-147736-7 5-147723-7 5-147728-7 5-147729-7
9.900 [22.86]] .800 [20.32] 5-147738-8 5-147737-8 5-147736-8 5-147723-8 5-147728-8 5-147729-8
10 1.000 [25.40] .900 [22.86] 5-147738-9 5-147737-9 5-147736-9 5-147723-9 5-147728-9 5-147729-9
11 1.100 [27.94] 1.000 [25.40] 6-147738-0 6-147737-0 6-147736-0 6-147723-0 6-147728-0 6-147729-0
12 1.200 [30.48] 1.100 [27.94] 6-147738-1 6-147737-1 6-147736-1 6-147723-1 6-147728-1 6-147729-1
13 1.300 [33.02] 1.200 [30.48] 6-147738-2 6-147737-2 6-147736-2 6-147723-2 6-147728-2 6-147729-2
14 1.400 [35.56] 1.300 [33.02] 6-147738-3 6-147737-3 6-147736-3 6-147723-3 6-147728-3 6-147729-3
15 1.500 [38.10] 1.400 [35.56] 6-147738-4 6-147737-4 6-147736-4 6-147723-4 6-147728-4 6-147729-4
16 1.600 [40.64] 1.500 [38.10] 6-147738-5 6-147737-5 6-147736-5 6-147723-5 6-147728-5 6-147729-5
17 1.700 [43.18] 1.600 [40.64] 6-147738-6 6-147737-6 6-147736-6 6-147723-6 6-147728-6 6-147729-6
18 1.800 [45.72] 1.700 [43.18] 6-147738-7 6-147737-7 6-147736-7 6-147723-7 6-147728-7 6-147729-7
19 1.900 [48.26] 1.800 [45.72] 6-147738-8 6-147737-8 6-147736-8 6-147723-8 6-147728-8 6-147729-8
20 2.000 [50.80] 1.900 [48.26] 6-147738-9 6-147737-9 6-147736-9 6-147723-9 6-147728-9 6-147729-9
30 3.000 [76.20] 2.900 [73.66] 7-147738-9 7-147737-9 7-147736-9 7-147723-9 7-147728-9 7-147729-9
40 4.000 [101.60] 3.900 [99.06] 8-147738-9 8-147737-9 8-147736-9 8-147723-9 8-147728-9 8-147729-9
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application.
A
B
.265
[6.73]
.100
[2.54]
.228
[5.78]
.020
[0.51] Standoff Typ.
.060
[1.52] Min. .090
[2.28]
.148
[3.77]
.208
[5.28] Max.
.107
[2.72]
T
yp.
.100
[2.54] Typ.
.140
[3.56]
.040±.003
[1.02±0.08] Dia. Typ.
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
(For bottom entry or pass
through applications)
(Localized Gold
Plate Area)
Point of
Contact
189
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
Surface Mount,Double Row,
Dual Entry with Holddowns
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
Technical Documents
— page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult TE.
.100
[2.54]
T
yp.
.050
[1.27]
T
yp.
.198
[5.03]
A
.020
[0.51]
Typ.
.265
[6.73]
Typ.
.083
[2.12]
Typ.
.266
[6.75]
.107
[2.72]
Typ.
.148
[3.76]
Typ.
B
D
C
.110
[2.79]
T
yp. .238
[6.05]
Typ.
.100
[2.54]
Typ.
.075
[1.91]
Typ.
.090
[2.29]
Typ.
.040±.003
[1.02±0.08]
.040±.003
[1.02±0.08]
.004
[0.10]
Typ.
.027±.002
[0.69±0.05] T
yp.
.060
[1.52]
Typ.
.040
[1.02]
Typ.
.100
[2.54] Typ.
Recommended PC Board Layout
(.008 [0.20] thick stencil)
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
(For bottom entry or
pass thru applications)
(Localized Gold
Plate Area)
Point of
Contact
190
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
5
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers (Continued)
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
Packaged in Tubes Packaged in Tape and Reel
No. of Dimensions Contact Plating/Part Nos. Contact Plating/Part Nos.
Pos. ABCD
Plating A Plating B Plating C Plating A Plating B Plating C
10 .700 [17.78] .400 [10.16] .600 [15.24] See Note 1 5-147102-5 5-147101-5 5-147103-5 5-147747-5 5-147746-5 5-147745-5
14 .900 [22.86] .600 [15.24] .800 [20.32] See Note 1 5-147102-7 5-147101-7 5-147103-7 5-147747-7 5-147746-7 5-147745-7
201.200 [30.48] .900 [22.86] 1.100 [27.94] See Note 1 6-147102-0 6-147101-0 6-147103-0 6-147747-0 6-147746-0 6-147745-0
221.300 [33.02] 1.000 [25.40] 1.200 [30.48] See Note 1 6-147102-1 6-147101-1 6-147103-1 6-147747-1 6-147746-1 6-147745-1
26 1.500 [38.10] 1.200 [30.48] 1.400 [35.56] See Note 1 6-147102-3 6-147101-3 6-147103-3 6-147747-3 6-147746-3 6-147745-3
30 1.700 [43.18] 1.400 [35.56] 1.600 [40.64] See Note 1 6-147102-5 6-147101-5 6-147103-5 6-147747-5 6-147746-5 6-147745-5
341.900 [48.26] 1.600 [40.64] 1.800 [45.72] See Note 1 6-147102-7 6-147101-7 6-147103-7 6-147747-7 6-147746-7 6-147745-7
36 2.000 [50.08] 1.700 [43.18] 1.900 [48.26] See Note 1 6-147102-8 6-147101-8 6-147103-8 6-147747-8 6-147746-8 6-147745-8
40 2.200 [55.88] 1.900 [48.26] 2.100 [53.34] See Note 1 7-147102-0 7-147101-0 7-147103-0 7-147747-0 7-147746-0 7-147745-0
462.500 [63.50] 2.200 [55.88] 2.400 [60.96] See Note 1 7-147102-3 7-147101-3 7-147103-3 7-147747-3 7-147746-3 7-147745-3
502.700 [68.58] 2.400 [60.96] 2.600 [66.04] See Note 1 7-147102-5 7-147101-5 7-147103-5 7-147747-5 7-147746-5 7-147745-5
62 3.300 [83.82] 3.000 [76.20] 3.200 [81.28] See Note 1 8-147102-1 8-147101-1 8-147103-1 8-147747-1 8-147746-1 8-147745-1
64 3.400 [86.36] 3.100 [78.74] 3.300 [83.82] See Note 1 8-147102-2 8-147101-2 8-147103-2 8-147747-2 8-147746-2 8-147745-2
663.500 [88.90] 3.200 [81.28] 3.400 [86.36] See Note 1 8-147102-3 8-147101-3 8-147103-3 8-147747-3 8-147746-3 8-147745-3
70 3.700 [95.98] 3.400 [86.36] 3.600 [91.44] See Note 1 8-147102-5 8-147101-5 8-147103-5 8-147747-5 8-147746-5 8-147745-5
80 4.300 [109.22] 3.900 [99.06] 4.200 [106.68] 2.100 [53.34] 9-147102-0 9-147101-0 9-147103-0 9-147747-0 9-147746-0 9-147745-0
Notes: 1. No center holddown.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
AMPMODU Interconnection System
191
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
Surface Mount,Double Row,
Dual Entry
End to End Stackable
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] tin-lead over
.000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
Technical Documents
— page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult TE.
.050
[1.27]
Max.
.265
[6.73]
T
yp.
A
.027±.002
[0.69±0.05] Typ.
.020
[0.51]
T
yp.
.060
[1.52] Typ.
.100
[2.54] Typ.
.100
[2.54] Typ.
.238
[6.05]
Typ.
.100
[2.54]
Typ.
.266
[6.75]
.198±.002
[5.03±0.05]
.090
[2.29]
.148
[3.76] .107
[2.72]
B
.040
[1.02] Typ.
.100
[2.54]
T
yp.
.004
[0.10]
Typ.
Recommended PC Board Pad Layout
(.008 [0.20] thick stencil)
(for Bottom Entry and Pass Through applications)
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
(Localized Gold
Plate Area)
Point of
Contact
192
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
Packaged in Tubes Packaged in Tape & Reel
No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos.
Pos. AB
Plating A Plating B Plating C Plating A Plating B Plating C
10 .500 [12.70] .400 [10.16] 5-147741-5 5-147740-5 5-147739-5 5-147105-5 5-147104-5 5-147106-5
14 .700 [17.78] .600 [15.24] 5-147741-7 5-147740-7 5-147739-7 5-147105-7 5-147104-7 5-147106-7
201.000 [25.40] .900 [22.86] 6-147741-0 6-147740-0 6-147739-0 6-147105-0 6-147104-0 6-147106-0
221.100 [27.94] 1.000 [25.40] 6-147741-1 6-147740-1 6-147739-1 6-147105-1 6-147104-1 6-147106-1
26 1.300 [33.02] 1.200 [30.48] 6-147741-3 6-147740-3 6-147739-3 6-147105-3 6-147104-3 6-147106-3
30 1.500 [38.10] 1.400 [35.56] 6-147741-5 6-147740-5 6-147739-5 6-147105-5 6-147104-5 6-147106-5
341.700 [43.18] 1.600 [40.64] 6-147741-7 6-147740-7 6-147739-7 6-147105-7 6-147104-7 6-147106-7
36 1.800 [45.72] 1.700 [43.18] 6-147741-8 6-147740-8 6-147739-8 6-147105-8 6-147104-8 6-147106-8
40 2.000 [50.80] 1.900 [48.26] 7-147741-0 7-147740-0 7-147739-0 7-147105-0 7-147104-0 7-147106-0
462.300 [58.42] 2.200 [55.88] 7-147741-3 7-147740-3 7-147739-3 7-147105-3 7-147104-3 7-147106-3
502.500 [63.50] 2.400 [60.96] 7-147741-5 7-147740-5 7-147739-5 7-147105-5 7-147104-5 7-147106-5
62 3.100 [78.74] 3.000 [76.20] 8-147741-1 8-147740-1 8-147739-1 8-147105-1 8-147104-1 8-147106-1
64 3.200 [81.28] 3.100 [78.74] 8-147741-2 8-147740-2 8-147739-2 8-147105-2 8-147104-2 8-147106-2
663.300 [83.82] 3.200 [81.28] 8-147741-3 8-147740-3 8-147739-3 8-147105-3 8-147104-3 8-147106-3
70 3.500 [88.90] 3.400 [86.36] 8-147741-5 8-147740-5 8-147739-5 8-147105-5 8-147104-5 8-147106-5
80 4.000 [101.60] 3.900 [99.06] 9-147741-0 9-147740-0 9-147739-0 9-147105-0 9-147104-0 9-147106-0
Notes: 1. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
193
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Two-Piece Printed Circuit Board Connectors
Note: All part numbers are RoHS
compliant.
Printed Circuit Board
Connectors
Product Facts
■Two-Piece reliability
■Two- and three-row systems
available
■Short signal path for VLSI
applications
■Receptacles employ dual
cantilever beams and built-
in anti-overstress to provide
reliable connections
■Built-in guides provide
alignment before contact
engagement
■Closed entry receptacle
housings provide lead-in
ramp for positive mating of
contacts
■Shrouded headers provide
full pin protection
■Polarized headers
■Vertical headers available
with ACTION PIN posts or
.025 [0.64] square solder
posts
■Repairable ACTION PIN
posts
■Simple seating tooling for
headers with ACTION PIN
posts
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
3-Row Header
5-103264-3
ACTION PIN Posts Solder Posts
Receptacle Contact
(Double Beam with Anti-Overstress)
Board Retention Feature Available
Double-Row
Make First/Break
Last Header
(Part Nos. available
upon request)
3-Row Closed Entry
Receptacle 5-534974-8
5-102690-3
Vertical Header
with ACTION PIN
Posts
5-534972-2 Vertical
Receptacle
5-532956-3 Horizontal
Receptacle
5-532956-3 Horizontal
Receptacle
6-102589-2 3/4 Shroud,
Right Angle Header For drawings, technical data or samples,
contact your TE sales engineer or call
the TE Product Information Center:
1-800-522-6752
R
R
194
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Two-Piece Printed Circuit Board Connectors (Continued)
Printed Circuit Board
Connectors
Temperature Rating —
Headers and Receptacles —
–65°C to +125°C (black thermoplastic
housings, 94V-0 rated)
Durability (Tested to) — 200 cycles
for .000030 [0.00076] gold plating;
75 cycles for .000015 [0.00038] gold
plating
Mating Force — 8 oz. [2.22N]
maximum per contact
Unmating Force — .75 oz. [0.2N]
minimum per contact during third
mating cycle
Performance Specifications
Current Rating —
3 amperes max. for single contact;
2 amperes max. per contact for fully
energized connector
Voltage Rating — 250 VAC
Dielectric Rating — 750 VAC rms
between contacts for one minute
Termination Resistance —
12 milliohms max. at 100 milliamperes
test current, and 50 millivolts open cir-
cuit voltage
Insulation Resistance — 1000
megohms after temperature/humidity
cycling
AMPMODU Two-Piece
Printed Circuit Board
connectors are designed
to reliably and economically
meet the packaging and
interconnection requirements
of today’s sophisticated
electronics.
The double row system is
produced in 10 thru 200
positions in the vertical
headers and horizontal
receptacles, and 10 thru
160 positions in the right
angle headers and vertical
receptacles.
The AMPMODU three-row
connector system is
produced in 30 through 300
positions (straight post
headers and mating
horizontal receptacles).
Both two- and three-row
vertical headers are
available with press-fit
ACTION PIN posts or
standard .025 [0.64] square
solder posts. There is a
simple seating tool for
headers with ACTION PIN
posts.
A board retention feature
is offered in the two-row
horizontal receptacles,
two-row right angle headers
and two- and three-row
vertical headers. Built-in
guides assure accurate
header and receptacle
alignment before contact
engagement.
Closed entry receptacle
housings provide a lead-in
ramp for positive mating of
contacts.
195
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050-
.000100 [0.00127-0.00254] matte tin on
solder area, with entire contact under-
plated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire con-
tact underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Headers — pages 198, 199
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult TE.
Receptacle Assembly Part Nos. Receptacle Assembly Part Nos.
No. of Dimensions with .115 [2.92] Solder Tail Lengths with .145 [3.68] Solder Tail Lengths
Pos. AB Standard Solder Tails Board Retention Tails Standard Solder Tails
Plating A Plating B Plating A Plating B Plating A
12 .858 [21.79] .500 [12.70] 5-532956-1 5-532955-1 5-534204-2 5-534975-5 5-533009-1
14 .958 [24.33] .600 [15.24] — 7-532955-5 —— —
16 1.058 [26.87] .700 [17.78] 5-532956-2 — 6-534204-0 6-534975-5 —
20 1.258 [31.95] .900 [22.86] 5-532956-3 5-532955-3 5-534204-9 5-534975-6 —
24 1.458 [37.03] 1.100 [27.94] 5-532956-4 5-532955-4 6-534204-1 5-534975-7 —
30 1.758 [44.65] 1.400 [35.56] 5-532956-5 5-532955-5 5-534204-4 5-534975-8 5-533009-5
36 2.058 [52.27] 1.700 [43.18] 5-532956-6 5-532955-6 5-534204-3 5-534975-9 —
40 2.258 [57.35] 1.900 [48.26] 5-532956-7 5-532955-7 6-534204-2 6-534975-0 —
50 2.758 [70.05] 2.400 [60.96] 5-532956-8 5-532955-8 5-534204-1 6-534975-1 5-533009-8
60 3.258 [82.75] 2.900 [73.66] 5-532956-9 5-532955-9 5-534204-5 6-534975-2 5-533009-9
70 3.758 [95.45] 3.400 [86.36] 6-532956-0 6-532955-0 6-534204-3 6-534975-3 6-533009-0
72 3.858 [97.99] 3.500 [88.90] 6-532956-1 6-532955-1 6-534204-4 ——
80 4.258 [108.15] 3.900 [99.06] 6-532956-2 6-532955-2 5-534204-8 6-534975-4 6-533009-2
86 4.558 [115.77] 4.200 [106.68] 6-532956-3 6-532955-3 —— 6-533009-3
90 4.758 [120.85] 4.400 [111.76] 6-532956-4 6-532955-4 —— —
96 5.058 [128.47] 4.700 [119.38] 6-532956-5 6-532955-5 6-534204-5 — 6-533009-5
100 5.258 [133.55] 4.900 [124.46] 6-532956-6 6-532955-6 5-534204-6 5-534975-1 6-533009-6
110 5.758 [146.25] 5.400 [137.16] 6-532956-7 6-532955-7 6-534204-6 ——
120 6.258 [158.95] 5.900 [149.86] 6-532956-8 6-532955-8 5-534204-7 5-534975-2 6-533009-8
130 6.758 [171.65] 6.400 [162.56] 7-532956-0 7-532955-0 6-534204-7 ——
200 10.258 [260.55] 9.900 [251.46] 7-532956-3 7-532955-3 7-534204-0 5-534975-4 —
Notes: 1. .115 [2.92] tail length is for use with .062 [1.57] PC boards; .145 [3.68] tail length is for use with .093 [2.36] PC boards.
Notes: 2. Receptacle assemblies with low force contacts are available, consult TE.
3. .256 [6.50] minimum positive pin stop to prevent shorting between rows.
.320
[8.13]
.144
[3.66] Dia.
(2 Plc.)
.179
[4.55]
Typ.
.100
[2.54]
.125
[3.17]
(Localized
Gold Plate Area)
.256
[6.50]
(See Note 3.)
.115
[2.92]
(See Note 2)
.238
[6.05]
C
LC
L
.310±.010
[7.88±0.25]
.065±.005
[1.65±0.13]
to
.100±.005
[2.54±0.13]
.310±.002
[7.87±0.05]
.035±.003
[0.89±0.08] T
yp. Dia.
(Finished Hole)
.100±.003
[2.54±0.08]
.069
[1.75]
.115 or .145
[2.92 or 3.68]
(See Note 1)
.115 or .145
[2.92 or 3.68]
(See Note 2)
A
B
Standard Solder Tails
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Board Retention Tails
Tolerances not to accumulate within
one connector pattern.
Material — Natural color nylon
Keying Plug
Min.
.174
[4.42]
(Point of Contact)
Max.
Part No. 86286-1
(Plugs into receptacle contact)
Horizontal Mount (with Guide
Pin Slots and Standoffs)
196
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Vertical Mount
(with Guide Pin Slots and
Standoffs)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050-.000100
[0.00127-0.00254] matte tin on solder
area, with entire contact underplated
.000050 [0.00127] nickel
Related Product Data
Mateable Headers — pages 198, 199
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult TE.
.115
[2.92]
.129
[3.28] Typ.
.320
[8.13]
.410
[10.41]
.238
[6.05]
.100
[2.54] T
yp.
.179
[4.55] T
yp.
.125
[3.18]
(Localized
Gold Plate Area)
.100
[2.54]
.100
[2.54]
.144
[3.68]
Dia.
.069
[1.75]
Typ.
A
B±.008
[±0.20]
.100±.003
[2.54±0.08]
.100±.003
[2.54±0.08]
.035±.003
[0.89±0.08] Typ. Dia.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
Keying Plug
No. of Dimensions Receptacle Assembly
Pos. AB Part Nos.
30 1.758 [44.65] 1.400 [35.56] 5-534972-1
40 2.258 [57.35] 1.900 [48.26] 5-534972-2
50 2.758 [70.05] 2.400 [60.96] 5-534972-3
60 3.258 [82.75] 2.900 [73.66] 5-534972-4
70 3.758 [95.45] 3.400 [86.36] 5-534972-5
80 4.258 [108.15] 3.900 [99.06] 5-534972-6
90 4.758 [120.85] 4.400 [111.76] 5-534972-7
100 5.258 [133.55] 4.900 [124.46] 5-534972-8
120 6.258 [158.95] 5.900 [149.86] 6-534972-0
Material — Natural color nylon
Part No. 86286-1
(Plugs into receptacle contact)
197
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Receptacle Assemblies, Board Mount, Triple-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Horizontal Mount
(with Guide Pin Slots and
Standoffs)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
.000030 [0.00076] gold in mating area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire
contact underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Headers — page 201
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult TE.
.410
[10.41]
.145
[3.68]
.145
[3.68]
.125
[3.18]
(Localized
Gold Plate Area)
.115
[2.92]
.115
[2.92]
.400
[10.16]
.400
[10.16]
.100
[2.54]
.100
[2.54]
.069
[1.75]
.338
[8.59]
.144
[3.66]
Dia.
Typ.
.100
[2.54] Typ.
.179
[4.55] T
yp.
.300
[7.62]
.300
[7.62]
B
A
.035±.003
[0.89±0.08] T
yp. Dia.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tail Length
Tolerances not to accumulate within one
connector pattern.
Keying Plug
No. of Dimensions Receptacle Assembly Part Nos.
Pos. AB Plating A
72 2.658 [67.51] 2.300 [58.42] 5-534974-3
93 3.358 [85.29] 3.000 [76.20] 15-534974-4
96 3.458 [87.83] 3.100 [78.74] 1-5-534974-5
150 5.258 [133.55] 4.900 [124.46] 1-5-534974-8
210 7.258 [184.35] 6.900 [175.26] 6-534974-1
.065±.005
[1.65±0.13]
Material — Natural color nylon
Part No. 86286-1
(Plugs into receptacle contact)
.100±.003
[2.54±0.08]
198
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Solder Posts and
ACTION PIN Posts
(with Pin Protection
and Guide Pins)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating C — Selectively plated .000030
[0.00076] gold on contact area and
.000015 [0.00038] gold on termination
end, with gold flash over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
ACTION PIN Posts —pages 150, 151
Application Tooling —pages 152
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional header sizes are
available; minimum order
quantities may apply. Consult TE.
.085
[2.16]
.065
[1.66] R
(2 Plc.)
.130
[3.30]
(2 Plc.)
.040
[1.02]
(4 Sides)
.100
[2.54]
Pos.
Ref.
Board Retention Tails
(where indicated)
.515
[13.08]
.040±.003
[1.02±0.08]
(Finished Hole)
.0453±.001
[1.02±0.03]
(Drilled Hole)
.200
[5.08]
.110
[2.79]
.440
[11.18]
.130
[3.30]
.320
[8.13]
.180
[4.57]
.090
[2.29]
.200
[5.08]
(Localized
Gold Plate
Area)
A
B
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one connector pattern.
Header Part Nos. with .180 [4.57] Tail Length
No. of Dimensions Standard Solder Tails Board Retention Tails
Pos. AB
Plating A Plating B Plating A Plating B
12 .980 [24.89] .500 [12.70] 5-102692-1 5-102567-1 6-534978-6 5-534257-5
14 1.080 [27.43] .600 [15.24] — 7-102567-3 ——
16 1.180 [29.97] .700 [17.78] 6-102692-5 — 5-534978-2 6-534257-4
20 1.380 [35.05] .900 [22.86] 6-102692-6 6-102567-1 5-534978-3 5-534257-6
24 1.580 [40.13] 1.100 [27.94] 5-102692-2 5-102567-2 5-534978-4 5-534257-7
30 1.880 [47.75] 1.400 [35.56] 6-102692-7 6-102567-3 5-534978-5 5-534257-8
36 2.180 [55.37] 1.700 [43.18] 5-102692-3 5-102567-3 5-534978-6 5-534257-9
40 2.380 [60.45] 1.900 [48.26] 6-102692-3 6-102567-2 5-534978-7 6-534257-0
50 2.880 [73.15] 2.400 [60.96] 5-102692-4 5-102567-6 5-534978-8 6-534257-5
60 3.380 [85.85] 2.900 [73.66] 5-102692-5 5-102567-4 5-534978-9 6-534257-1
70 3.880 [98.55] 3.400 [86.36] 6-102692-4 6-102567-0 6-534978-5 6-534257-2
72 3.980 [101.09] 3.500 [88.90] 6-102692-8 6-102567-6 6-534978-0 —
80 4.380 [111.25] 3.900 [99.06] 5-102692-6 5-102567-8 6-534978-1 5-534257-1
86 4.680 [118.87] 4.200 [106.68] 6-102692-9 6-102567-7 ——
90 4.880 [123.95] 4.400 [111.76] 6-102692-2 6-102567-4 ——
96 5.180 [131.57] 4.700 [119.38] 5-102692-7 5-102567-5 6-534978-7 —
100 5.380 [136.65] 4.900 [124.46] 5-102692-8 5-102567-9 6-534978-8 5-534257-2
110 5.880 [149.35] 5.400 [137.16] 6-102692-0 6-102567-5 6-534978-2 —
120 6.380 [162.05] 5.900 [149.86] 5-102692-9 5-102567-7 6-534978-3 5-534257-3
130 6.880 [174.75] 6.400 [162.56] 7-102692-0 6-102567-9 6-534978-9 —
200 10.380 [263.65] 9.900 [251.46] 6-102692-1 7-102567-1 5-534978-1 6-534257-9
Note: Headers with make first/break last posts can be made available, consult TE.
.025 [0.64] Square
Board Retention Tails
.180
[4.57]
.100±.003
[2.54±0.08]
1 2 3
.100±.003
[2.54±0.08]
199
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline (Continued)
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
See chart
below
.025 [0.64] Square
ACTION PIN Tails
Header Part Nos. with ACTION PIN Posts
No. of Dimensions .250 [6.35] Tail Length .480 [12.19] Tail Length .680 [17.27] Tail Length
Pos. ABPlating A Plating B Plating A Plating C Plating C
12 .980 [24.89] .500 [12.70] 5-102690-1 5-103291-4 —— —
141.080 [27.43] .600 [15.24] — 5-103291-3 —— —
20 1.380 [35.05] .900 [22.86] 6-102690-3 5-103291-6 —— —
24 1.580 [40.13] 1.100 [27.94] 5-102690-2 5-103291-7 —— —
362.180 [55.37] 1.700 [43.18] 5-102690-3 5-103291-9 —— —
40 2.380 [60.45] 1.900 [48.26] 6-102690-6 5-103291-2 —— —
50 2.880 [73.15] 2.400 [60.96] 5-102690-4 6-103291-0 —— —
60 3.380 [85.85] 2.900 [73.66] 5-102690-5 6-103291-1 —— —
70 3.880 [98.55] 3.400 [86.36] 6-102690-7 6-103291-2 —— —
804.380 [111.25] 3.900 [99.06] 5-102690-6 6-103291-4 —— —
90 4.880 [123.95] 4.400 [111.76] 6-102690-1 6-103291-6 —— —
96 5.180[131.57] 4.700 [119.38] 5-102690-7 6-103291-8 —— —
100 5.380 [136.65] 4.900 [124.46] 5-102690-8 6-103291-9 —— 102777-3
120 6.380 [162.05] 5.900 [149.86] 5-102690-9 7-103291-1 5-102691-9 1-102666-1 102777-1
130 6.880 [174.75] 6.400 [162.56] —— —102666-9 —
Notes: 1. Other header sizes can be made available upon request.
Headers with ACTION PIN posts are for use with .093 [2.36] nominal or thicker PC boards.
2. Application tooling for installing headers with ACTION PIN posts is shown on pages 152 and 153.
3. Headers with .250 [6.35] tail length can be made available with make first/break last contacts,
consult TE.
4. Plated through holes to be prepared per recommendations found on page 151.
200
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Headers, Right-Angle Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Card Extender
(with Pin Protection
and Guide Pins)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional header sizes are
available; minimum order
quantities may apply. Consult TE.
.065
[1.65] R
(2 Plc.)
.040
[1.02]
Typ.
.200
[5.08]
Typ. .185
[4.70]
Typ.
.100
[2.54]
Pos.
Ref.
Board Retention Tails
(where indicated)
.599
[15.21]
.762
[19.35] Max.
.035±.003
[0.89±0.08] Dia. Typ.
(Standard
Finished Hole)
.157
[3.99]
.157
[3.99]
.320
[8.13]
.320
[8.13]
.100
[2.54]
.125
[3.18]
.125
[3.18]
.100
[2.54]
(Localized
Gold Plate
Area)
.040±.003
[1.02±0.08]
(Finished
Hole
w/Bd. Ret.)
A
B
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
.025 [0.64] Square
Board Retention Tails
.100±.003
[2.54±0.08]
Header Part Nos. with .125 [3.18] Tail Length
No. of Dimensions Standard Solder Tails Board Retention Tails
Pos. AB
Plating A Plating B Plating A
12 .980 [24.89] .500 [12.70] 6-102802-2 5-102589-8 5-534245-5
16 1.180 [29.97] .700 [17.78] 6-102802-4 — 5-534245-4
20 1.380 [35.05] .900 [22.86] 6-102802-5 6-102589-2 5-534245-6
24 1.580 [40.13] 1.100 [27.94] 6-102802-3 5-102589-6 5-534245-7
30 1.880 [47.75] 1.400 [35.56] 6-102802-6 5-102589-4 5-534245-2
36 2.180 [55.37] 1.700 [43.18] 5-102802-3 5-102589-2 5-534245-8
40 2.380 [60.45] 1.900 [48.26] 5-102802-8 6-102589-3 —
50 2.880 [73.15] 2.400 [60.96] 5-102802-4 5-102589-5 5-534245-1
60 3.380 [85.85] 2.900 [73.66] 5-102802-9 5-102589-7 —
72 3.980 [101.09] 3.500 [88.90] 6-102802-7 6-102589-7 —
80 4.380 [111.25] 3.900 [99.06] 5-102802-5 5-102589-1 6-534245-0
90 4.880 [123.95] 4.400 [111.76] 6-102802-0 6-102589-4 —
100 5.380 [136.65] 4.900 [124.46] 5-102802-6 5-102589-3 6-534245-1
120 6.380 [162.05] 5.900 [149.86] 5-102802-2 6-102589-1 5-534245-3
130 6.880 [174.75] 6.400 [162.56] 6-102802-9 6-102589-9 6-534245-3
Note: Headers with make first/break last posts can be made available, consult TE.
2 3 4
.100±.003
[2.54±0.08]
201
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Headers, Straight Post, Triple-Row, .100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Header Part Nos.
with .180 [4.57] Tail Length
Standard Board
No. of Dimensions
Solder Tails Retention Tails
Pos. AB
Plating A Plating A
72 2.780 [70.61] 2.300 [58.42] 5-103264-1 5-534258-1
96 3.480 [88.39] 3.000 [76.20] — 5-534258-3
150 5.380 [136.65] 4.900 [124.46] 5-103264-3 —
210 7.380 [187.45] 6.900 [175.26] 5-103264-4 —
Solder Posts
(with Pin Protection
and Guide Pins)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Receptacles — page 197
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional header assembly sizes
are available; minimum order
quantities may apply. Consult TE.
.065
[1.65] R
(2 Plc.)
.040
[1.02]
(4 Sides)
.200
[5.08]
.200
[5.08]
(Localized
Gold Plate
Area)
.100
[2.54]
Pos.
Ref.
Board Retention Tails
(where indicated)
.615
[15.62]
.210
[5.33]
.100
[2.54]
.200
[5.08]
.440
[11.18]
.085
[2.16]
.180
[4.57]
.100
[2.54]
.0453±.001
[1.151±0.03]
(Drilled Hole)
.040±.003
[1.66±0.08]
(Finished Hole)
A
B
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
.025 [0.64] Square
Board Retention Tails
1 2 3
.320
[8.13]
.090
[2.29]
.180
[4.57]
.100±.003
[2.54±0.08]
202
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Headers, VRM (Voltage Regulator Module),
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
No Dimensions
of AB
Header Part No.
Pos Standard Solder Tails .250 Length ACTION PIN Tails
30 2.450 [62.23] 1.400 [35.56] 5-146205-1 —
40 3.095 [78.62] 1.900 [48.26] — 5-147254-1
3.100 [78.74] 1.900 [48.26] 5-146315-1 —
Solder Posts and
ACTION PIN Posts (with
Pin Protection, Guide
Ribs, and Latching)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
ACTION PIN Posts —
page 150, 151
Application Tooling —
pages 152
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
.440
[11.18]
.515
[13.08]
.120
[3.05]
.320
[8.13]
.290
[7.37]
.040 +.003
[1.02 +.08]
.125
[3.18]
.100
[2.54] .525
[13.33]
.100
[2.54]
Housing Outline
.110
[2.79]
A
B
B
Recommended PC Board Hole Layout
203
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Accessories: End Shrouds for Machine-Applied Posts
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Technical Documents
— page 276
Material — Black thermoplastic, flame
retardant
Typical Assembly
Single-Row, .100 [2.54] Centers
Part No. 102338-1
Material — Black glass-filled
polyester
Double-Row, .100 x .100 [2.54 x 2.54] Centers
Part No. 102114-1
.066
[1.68]
.290
[7.37]
.164
[4.17]
.050
[1.27]
.712
[18.08]
.059
[1.50]
Max.
.350
[8.89]
.066
[1.68] .029
[0.74]
Dia.
.405
[10.29]
.280
[7.11]
.150
[3.81]
.050
[1.27]
.890
[22.61]
.059
[1.50]
Max. .350
[8.89]
.066
[1.68]
.029
[0.74]
Dia.
Mating Polarized
Housing
End
Shroud
Board Mounted
Straight Posts
Break Line for 7 Pos.
or Larger Header
PC Board
Break Line for 14 Pos.
or Larger Header
204
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Accessories: Barrier Insert, Part No. 87743-1
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Material
Black polyester
Technical Documents
— page 276
The barrier insert can be
used on double row headers
(.100 x .100 [2.54 x 2.54]
centers), including shrouded
versions—3 and 4 sides,
as well as unshrouded
straight post headers. With
one barrier insert several
configurations can be
obtained, providing headers
with capabilities of accept-
ing various combinations of
polarized and non-polarized
AMPMODU connectors.
For unshrouded headers,
the barrier insert is used
to establish polarization
and to compartmentalize
the header. For shrouded
headers, the barrier insert is
used to compartmentalize
the header, while maintaining
polarization. The barrier
insert itself is notched to
facilitate cutting off the
ends with a simple tool
such as tin snips or scissors
to achieve the desired
configuration.
Barrier Insert Cutoffs
Fig. 1
Partial Cutoff
(Left and Right Sides)
Fig. 2
Partial Cutoff
(Left Side)
Complete Cutoff
(Right Side)
Fig. 3
Complete Cutoff
(Left Side)
Partial Cutoff
(Right Side)
Fig. 4
Complete Cutoff
(Left and Right Sides)
Typical Barrier Insert Applications
For Unshrouded Double-Row, Straight Post Headers,
.100 x .100 [2.54 x 2.54] Centers
For Shrouded Double-Row, 3 and 4 Sided Headers,
.100 x .100 [2.54 x 2.54] Centers
Note: All configurations of barrier inserts compartmentalize headers and maintain polarization,
except bar (Fig. 4) configuration, which is used primarily for compartmentalizing headers.
Note: Right-angle (Figs. 2 and 3) and “T” (Fig. 1) configurations of barrier insert establish
polarization; bar (Fig. 4) configuration of barrier insert compartmentalizes header.
.446
[11.33]
.037
[0.94]
.314
[7.98] .127
[3.23]
.340
[8.64]
.030
[0.76]
45°
.030
[0.76]
.090
[2.29]
.100
[2.54]
.087
[2.21]
.047
[1.19]
.094
[2.39]
See Fig. 3 See Fig. 4 See Fig. 1 See Fig. 2
See Fig. 2 See Fig. 4 See Fig. 1 See Fig. 3
.031-.043
[0.79-1.09]
Dia. x .250[
[6.35]
Deep—
remainder
.029±.001
[0.74±0.03]
Dia.
Thru Typ. (2)
205
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Accessories: Snap-In Polarizer for Low Profile Headers
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
Material
Black thermoplastic, flame retardant
Part Numbers
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data
Low Profile Headers used with —
pages 135-140
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
Note: For Post Shunts, contact TE.
.335
[8.51]
.134
[3.40]
.335
[8.51]
.134
[3.40]
Break Line
(See below.)
Break Line
(See below.)
Break Line
206
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Locking Clip
Contacts and Housings
Locking Clip Contacts and Housings
.100 x .100
[2.54 x 2.54]
Contact
Clearance
Hole
Product Facts
■Self-retaining contacts
provide permanent
connection with quick
connect and disconnect
■Fast, easy installation with
no additional locking
hardware required
■Mates with .025 [0.64]
square posts in a variety
of configurations
■Single- and double-row
configurations in up to
20 positions on .100 [2.54]
centers
■Modular design permits
end-to-end stacking
(double- row only) for
circuit grouping
■Choice of tin or select gold
plating
■Housings made of 94V-0
rated glass-filled polyester
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
.273/.350*
[6.93/8.89]
(with housing)
Extraction
Tool Slot
.200/.277*
[5.08/7.04]
(without
housing
PC Board
Single Row
Both Ends
Closed
(Page 208)
Single
Contact
(Page 207)
Both Ends
Closed
(for specified
no. of circuits—
housing size)
(Page 209)
Right End
Open (for
stacking to
right side)
(Page 209)
Left End
Open (for
stacking to
left side)
(Page 209)
Typical Application
*If post is longer than maximum specified, post tip may butt against wire ends.
Dimension defines .025 x .025 [0.64 x 0.64] portion of post.
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — Gold plated
contacts
16 milliohms (max.) — Tin plated
contacts
Durability — Ref. Product
Specification 108-36028 and
108-36028-1
.025
[0.64]
Sq. Posts
R
R
207
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Locking Clip
Contacts and Housings
Locking Clip Contacts
Note: All part numbers are RoHS compliant.
Wire Crimp Contacts
with Insulation Support
Material and Finish
Contact Spring — Stainless steel
Pating A — Selectively plated
.000050 [0.00127] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating B — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating C — .000100-.000200
[0.00254-0.00508] bright tin over
.000050 [0.00127] nickel on entire
contact
Wire Harnessing
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing.
For more information
request Insulation and
Bundling Products Catalog
124132.
Extraction Tool
No. 91084-1
Fixed
Clamp
Cable
Tie
Unrestricted
Wires for
Free-Floating
Contacts
Ins. Heavy Duty Miniature
Wire Size
Dia. Dimension Part Nos. Applicator for Hand
Range
Range AFinish Strip Form Loose Piece AMP-O-LECTRIC Tool
AWG [mm2]Machine* No.
Plating B 87190-1 87191-1
30-28 0.05-0.09 .029-.039 [0.74-0.99] .550 [13.97] Plating C 5-87190-2 5-87191-2 567310-2 90295-1
Plating A 87124-3 87165-3
26-22 0.12-0.4 .038-.062 [0.97-1.57] .584 [14.83] Plating B 87124-1 87165-1 466721-2 91533-1
Plating C 5-87124-2 5-87165-2
20 0.5-0.6 .038-.062 [0.97-1.57] .584 [14.83] Plating B 867052-2 — 679996-2 90431-1
Plating C 5-867052-1 —
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. These contacts must be crimped in accordance with TE Specification No. 114-25006 in order to function properly in a connector housing.
2. Extraction Tool No. 91084-1 is used for removing individual contacts from connector housings and for detaching contacts from mating posts.
Spring
Body
A
Related Product Data
Housings Used With —
pages 208, 209
Application Tooling — page 272
Technical Documents —
pages 277, 278
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
208
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Wire-Applied Housings for Locking Clip Contacts,
Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Locking Clip
Contacts and Housings
Single-Row
Material
Glass-filled polyester, 94V-0 rated
Related Product Data
Contacts — page 207
Mateable Headers and Posts —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents —
pages 277, 278
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
.125 [3.18] centerline single-row,
2 and 3 position housings are
available, Base Part No. 104905.
They are designed to be stackable
end-to-end and side-by-side.
Consult TE.
Keying Plug
Part No. 87179-1
(Plugs directly into housings for
.025 [0.64] square post contacts)
Material — Yellow, nylon
A
C
T
yp.
B
.085
[2.16]
.100
[2.54] Typ.
.175
[4.44]
.700
[17.78]
.025 [0.64]
Sq. Post
(Shown for
Ref. only)
.350
.273
8.89
6.93
.145
[3.68]
.060
[1.52]
[]
(Post
Length)
No. of Dimensions Housing Part No.
Pos. ABCUnstamped Stamped
1.108 [2.74] — .054 [1.37] 87175-2 —
2.216 [5.49] .100 [2.54] .058 [1.47] 87175-6 —
3.316 [8.03] .200 [5.08] .058 [1.47] 87175-8 —
4.416 [10.57] .300 [7.62] .058 [1.47] 1-87175-0 —
5.516 [13.11] .400 [10.16] .058 [1.47] 1-87175-2 —
6.616 [15.65] .500 [12.70] .058 [1.47] 1-87175-4 1-87175-3
7.716 [18.19] .600 [15.24] .058 [1.47] 1-87175-6 1-87175-5
8.816 [20.73] .700 [17.78] .058 [1.47] 1-87175-8 1-87175-7
9.916 [23.27] .800 [20.32] .058 [1.47] 2-87175-0 1-87175-9
10 1.016 [25.81] .900 [22.86] .058 [1.47] 2-87175-2 2-87175-1
11 1.116 [28.35] 1.000 [25.40] .058 [1.47] 2-87175-4 2-87175-3
12 1.216 [30.89] 1.100 [27.94] .058 [1.47] 2-87175-6 2-87175-5
13 1.316 [33.43] 1.200 [30.48] .058 [1.47] 2-87175-8 2-87175-7
14 1.416 [35.97] 1.300 [33.02] .058 [1.47] 3-87175-0 2-87175-9
15 1.516 [38.51] 1.400 [35.56] .058 [1.47] 87175-4 87175-3
Note: Housing illustrated above is the “Both Ends Closed” version.
209
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Wire-Applied Housings for Locking Clip Contacts,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Locking Clip
Contacts and Housings
Double-Row
Material
Glass-filled polyester, 94V-0 rated
Related Product Data
Contacts — page 207
Mateable Headers and Posts —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents —
pages 277, 278
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
Keying Plug
Part No. 87179-1
(Plugs directly into housings for
.025 [0.64] square post contacts)
Material — Yellow, nylon
A
B
.350
[8.89]
(Post Length)
.100
[2.54] Typ.
.700
[17.78]
.025 [0.64]
Sq. Post
(Shown for
Ref. only)
.300
[7.62]
Both Ends Closed
Housing No. of Dimensions Housing Part No.
Configuration Pos. ABUnstamped Stamped
2.116 [2.95] — 87176-2 —
4.216 [5.49] .100 [2.54] 87133-1 —
6.316 [8.03] .200 [5.08] 87133-7 87133-8
8.416 [10.57] .300 [7.62] 87133-9 1-87133-0
Both Ends Closed 10 .516 [13.11] .400 [10.16] 87133-2 87133-5
12 .616 [15.65] .500 [12.70] 1-87133-1 1-87133-2
16 .816 [20.73] .700 [17.78] 1-87133-3 1-87133-4
18 .916 [23.27] .800 [20.32] 1-87133-5 1-87133-6
20 1.016 [25.81] .900 [22.86] 87133-3 87133-6
4.216 [5.49] .100 [2.54] 87132-1 —
Right End Open 10 .516 [13.11] .400 [10.16] 87132-2 87132-5
20 1.016 [25.81] .900 [22.86] 87132-3 87132-6
4.216 [5.49] .100 [2.54] 87131-1 —
Left End Open 10 .516 [13.11] .400 [10.16] 87131-2 87131-5
20 1.016 [25.81] .900 [22.86] 87131-3 87131-6
Note: Housing illustrated above is the “Both Ends Closed” version.
.270
[6.86]
Max.
.100
[2.54]
.058
[1.47]
Right End Open Left End Open
Key
Keyway
210
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Wire-Applied Contacts and Housings
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied
Contacts and Housings
Product Facts
■Terminates 32-20 AWG
[0.03-0.6mm2] discrete wire
■Contacts have insulation
support
■Choice of three contact
mating pressures
■Available in a variety of
gold and tin platings
■Receptacles mate with .025
[0.64] square or round posts
■Dual cantilever contact
beam with built-in
anti-overstress feature
for reliable matings
■Housings accept a variety of
receptacle and pin contacts
■Housing sizes range up to
100 positions
■Housing configurations
include single- and double-
rows on .100 [2.54]
centerlines
■Housing options include
detent latching, polarization
and bonded strain relief/
pull tabs
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — Beryllium
copper contacts
20 milliohms (max.) — Copper-tin-
phosphor bronze contacts
Durability — Ref. Product
Specification 108-25020
Wire-to-Board
1-87631-5 D-R Housing, Polarized with Detent
6-87756-6 Std. Pressure Contacts
3-87977-5 D-R Housing, Polarized
6-87756-6 Std. Pressure Contacts
1-87499-8 S-R Housing, Plain
102128-1 High Pressure Contacts
102387-1 D-R Ejection Housing,
Center Polarized
6-87756-6 Std. Pressure Contacts
1-87456-5 D-R Housing, Plain
6-87756-6 Std. Pressure Contacts
1-87756-6 Std. Pressure Plain
6-87456-6 D-R Housing, Contacts
87483-3 D-R Housing with Mounting Ears
6-87756-6 Std. Pressure Contacts
1825851-1 Latch 102241-8 S-R Housing Polarized with
Detent
102128-1 High Pressure Contacts
5-103166-8 Hdr
5-102202-7 Hdr
5102154-1 Hdr
1-87232-0
Hdr
5-103166-8 Hdr
103168-8
Hdr
R
R
211
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Pin and Receptacle Contacts
Note: All part numbers are RoHS compliant.
Mod IV Contacts
Standard Pressure
Configuration
Material and Finish
Beryllium copper, phosphor bronze, or
copper-tin-phosphor bronze (see
charts), plated as follows:
Plating A — Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating B — Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire
contact
Related Product Data
Housings Used With —
pages 214-220
Performance Characteristics —
page 210
Application Tooling —
page 270-272
Technical Documents —
pages 276-278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Additional header sizes are
available; minimum order
quantities may apply.
Consult TE.
Crimp Snap-In (No-strip)
Receptacles and Crimp
Snap-In Pins with
Insulation Support
(Standard Pressure)
.068
[1.73]
Ins. Part Nos. Heavy Duty Miniature Hand
Dia. Applicator No. Tool
Range Finish Strip Form Loose Piece for AMP-O-LECTRIC Part No.
Machine*
.040-.055 [1.02-1.40] Plating A 87107-5 102348-2 567307-2 90381-1
Plating C 87107-6 102348-3
.058
[1.47]
.016
[0.41]
Gap Max.
.165
[4.19]
.470
[11.94]
.815
[20.70]
No-Strip
Receptacle
Pin with
Insulation Support
Crimp Snap-In (No-strip) Receptacles
Wire Ins. Part Nos. Heavy Duty Miniature Hand
Size Dia. Applicator No. Tool
Range (Max.) Finish Strip Form Loose Piece for AMP-O-LECTRIC Part No.
AWG [mm2]Machine* Premium Commercial
.061 Plating A 102095-3 102107-2
26-22 0.12-0.4 [1.55] Plating B 102095-2 102107-1 466812-2 91517-1 58641-1†
Plating C 5-102095-4 5-102107-3
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos.
of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench
machines and fully automatic AMPOMATOR lead making machines.
†PRO-CRIMPER II hand tool frame with die set assembly.
Die Set Part No. 58641-2
Crimp Snap-In Pins with Insulation Support
212
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Contacts
Mod IV Contacts
Crimp Snap-In Receptacles
with Insulation Support
(Standard, Intermediate
and High Pressure)
Material and Finish
Beryllium copper, phosphor bronze or
copper-tin-phosphor bronze (see charts,
on following page), plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Plating D — Selectively plated .000050
[0.00127] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating E — Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating F — Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating G — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire contact
Related Product Data
Housings Used With —
pages 214-220
Performance Characteristics —
page 210
Application Tooling —
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
.058
[1.47]
.068
[1.73]
.165
[4.19]
Standard Pressure
Intermediate Pressure
High Pressure
A
A
A
A
Mating Force Unmating Force A-Gap Dimension
Standard Pressure 9 oz. Max. 1.5 oz. Min. .008/.014
Intermediate Pressure 16 oz. Max. 2 oz. Min. .008/.014
High Pressure 20 oz. Max. 3 oz. Min. .013±.002
213
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Receptacle Contacts (Continued)
Note: All part numbers are RoHS compliant.
Mod IV Contacts
Wire Ins. Part Nos. Heavy Duty Miniature Applicator for Hand
Size Dia. Dimension Material Finish Applicator for Stripper/ Tool
Range (Max.) A AMP-O-LECTRIC Crimper Part Nos.
AWG [mm2]
Strip Form Loose Piece Machine* Machine Premium Commercial
Cu-Sn-Ph Bz Plating A 5-102316-8 6-102316-4
Cu-Sn-Ph Bz Plating B 5-102316-6 6-102316-3
32-27 0.03-0.1 .040 [1.02] .445 [11.30] Be Cu Plating D 1-102917-1 1-102917-2 466655-2 466921-1 91541-1 —
Be Cu Plating E 102917-1 102917-2
Be Cu Plating F 102917-5 102917-6
Cu-Sn-Ph Bz Plating G 102316-5 1-102316-2
Cu-Sn-Ph Bz Plating A 6-87756-7 6-87756-8
Cu-Sn-Ph Bz Plating B 6-87756-2 6-87756-6
.061 [1.55] .445 [11.30]
Cu-Sn-Ph Br Plating G 87756-6 87756-7
26-22 0.12-0.4 Be Cu Plating D 1-87666-6 87667-5 466571-2 466918-1 91517-1 58641-1†
Be Cu Plating E 87666-2 87667-2
Be Cu Plating F 87666-5 87667-5
Be Cu Plating G 87666-3 87667-3
Cu-Sn-Ph Bz Plating A 6-87523-8 6-87523-9
Cu-Sn-Ph Bz Plating B 2-87523-3 2-87523-4
24-20 0.2-0.6 .069 [1.75] .470 [11.94] Be Cu Plating E 85969-8 86016-2 466562-2 466905-1 91516-1 —
Be Cu Plating F 85969-6 86016-5
Cu-Sn-Ph Br Plating G 87523-5 87523-6
Be Cu Plating G 85969-9 86016-3
Standard Pressure (Mod IV)
Wire Ins. Part Nos. Heavy Duty Miniature Applicator for Hand
Size Dia. Dimension Material Finish Applicator for Stripper/ Tool
Range (Max.) A AMP-O-LECTRIC Crimper Part Nos.
AWG [mm2]
Strip Form Loose Piece Machine* Machine Premium Commercial
32-27 0.03-0.1 .040 [1.02] .445 [11.30] Cu-Sn-Ph Bz Plating A
5-
102920-1
5-
102920-2 466655-2 466921-1 91541-1 —
Be Cu Plating E 102918-1 102918-2
Cu-Sn-Ph Bz Plating A
5-
103171-4
5-
103171-5
26-22 0.12-0.4 .061 [1.55] .445 [11.30] Cu-Sn-Ph Bz Plating B
5-
103171-1
5-
103171-2 466571-2 466918-1 91517-1 58641-1†
Be Cu Plating E 102548-5 102548-6
Be Cu Plating F 102548-1 102548-3
Cu-Sn-Ph Bz Plating A 2-87195-3 2-87195-6
.069 [1.75] .470 [11.94]
Cu-Sn-Ph Bz Plating B 2-87195-4 2-87195-5
24-20 0.2-0.6 Be Cu Plating E 86492-6 87046-3 466562-2 466905-1 91516-1 —
Be Cu Plating F 86492-2 87046-1
Be Cu Plating G 86492-9 87046-4
Intermediate Pressure (Mod IV.v)
Wire Ins. Part Nos. Heavy Duty Miniature Applicator for Hand
Size Dia. Dimension Material Finish Applicator for AMP-O-MATIC Tool
Range (Max.) A AMP-O-LECTRIC Stripper/Crimper Part Nos.
AWG [mm2] Strip Form Loose Piece Machine* Machine
32-27 0.03-0.1 .040 [1.02] .445 [11.30] Ph Bz Plating E 103455-1 103455-2 466655-2 466921-1 91541-1
26-22 0.12-0.4 .061 [1.55] .445 [11.30] Ph Bz Plating E 87809-1 102128-1 466571-2 466918-1 91517-1
Ph Bz Plating G 87809-2 102128-2
24-20 0.2-0.6 .069 [1.75] .470 [11.94] Ph Bz Plating E 87309-9 1-87309-4 466562-2 466905-1 91516-1
Ph Bz Plating G 87309-8 1-87309-3
**For use with
AMP-O-LECTRIC
Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC
Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
**Contact material is phosphor bronze.
†PRO-CRIMPER II hand tool frame with die set assembly.
Die Set Part No. 58641-2
High Pressure (Mod V)**
214
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
Non-Polarized
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 93-95, 101-103
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
.600
[15.24]
.175
[4.45]
±.003
[±0.08]
B
.140
[3.56]
.100
[2.54]
±.003
[±0.08]
C
X
X
A
Max.
.072
[1.83]
T
yp.
No. of Dimensions Part No.
Pos. ABCStamped* Unstamped**
1.105 [2.67] —— — 7-87499-2
2.205 [5.21] .100 [2.54] — 87499-3 87499-4
3.305 [7.75] .100 [2.54] .100 [2.54] 87499-5 87499-6
4.405 [10.29] .200 [5.08] .100 [2.54] 87499-7 87499-8
5.505 [12.83] .200 [5.08] .200 [5.08] 87499-9 1-87499-0
6.605 [15.37] .300 [7.62] .200 [5.08] 1-87499-1 1-87499-2
7.705 [17.91] .300 [7.62] .300 [7.62] 87499-1 87499-2
8.805 [20.45] .400 [10.16] .300 [7.62] 1-87499-3 1-87499-4
9.905 [22.99] .400 [10.16] .400 [10.16] 1-87499-5 1-87499-6
10 1.005 [25.53] .500 [12.70] .400 [10.16] 1-87499-7 1-87499-8
11 1.105 [28.01] .500 [12.70] .500 [12.70] 1-87499-9 2-87499-0
12 1.205 [30.61] .600 [15.24] .500 [12.70] 2-87499-1 2-87499-2
13 1.305 [33.15] .600 [15.24] .600 [15.24] 2-87499-3 2-87499-4
14 1.405 [35.69] .700 [17.78] .600 [15.24] 2-87499-5 2-87499-6
15 1.505 [38.23] .700 [17.78] .700 [17.78] 2-87499-7 2-87499-8
16 1.605 [40.77] .800 [20.32] .700 [17.78] 2-87499-9 3-87499-0
17 1.700 [43.18] .800 [20.32] .800 [20.32] — 3-87499-2
18 1.805 [45.85] .900 [22.86] .800 [20.32] — 3-87499-4
19 1.900 [48.26] .900 [22.86] .900 [22.86] — 3-87499-6
20 2.005 [50.93] 1.000 [25.40] .900 [22.86] 3-87499-7 3-87499-8
21 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] — 4-87499-0
22 2.205 [56.01] 1.100 [27.94] 1.000 [25.40] — 4-87499-2
23 2.300 [58.42] 1.100 [27.94] 1.100 [27.94] — 4-87499-4
24 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] — 4-87499-6
25 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] — 4-87499-8
26 2.605 [66.17] 1.300 [33.02] 1.200 [30.48] — 5-87499-0
27 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] — 5-87499-2
28 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] — 5-87499-4
29 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] — 5-87499-6
30 3.005 [76.33] 1.500 [38.10] 1.400 [35.56] — 5-87499-8
31 3.100 [78.74] 1.500 [38.10] 1.500 [38.10] — 6-87499-0
32 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] — 6-87499-2
33 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] — 6-87499-4
34 3.400 [86.36] 1.700 [43.18] 1.600 [40.64] — 6-87499-6
35 3.500 [88.98] 1.700 [43.18] 1.700 [43.18] — 6-87499-8
36 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] — 7-87499-0
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Section X-X
.050
[1.27]
T
yp.
.070
[1.78]
Typ.
215
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
Polarized (with
Detent Latching)
A
.056
[1.42]
.050
[1.27]
.071
[1.80]
.182
[4.62]
.100
[2.54]
Typ.
.127
[3.23]
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Recessed Area
.175
[4.45]
±.003
[±0.08]
B±.003
[±0.08]
C
X
X
.072
[1.83]
.600
[15.24]
.100
[2.54]
Typ.
Typ.
No. of Dimensions Part Nos.
Pos. ABCUnstamped*
3.300 [7.62] .100 [2.54] .100 [2.54] 102241-1
4.400 [10.16] .200 [5.08] .100 [2.54] 102241-2
5.500 [12.70] .200 [5.08] .200 [5.08] 102241-3
6.600 [15.24] .300 [7.62] .200 [5.08] 102241-4
7.700 [17.78] .300 [7.62] .300 [7.62] 102241-5
8.800 [20.32] .400 [10.16] .300 [7.62] 102241-6
9.900 [22.86] .400 [10.16] .400 [10.16] 102241-7
10 1.000 [25.40] .500 [12.70] .400 [10.16] 102241-8
11 1.100 [27.94] .500 [12.70] .500 [12.70] 102241-9
12 1.200 [30.48] .600 [15.24] .500 [12.70] 1-102241-0
13 1.300 [33.02] .600 [15.24] .600 [15.24] 1-102241-1
14 1.400 [35.56] .700 [17.78] .600 [15.24] 1-102241-2
15 1.500 [38.10] .700 [17.78] .700 [17.78] 1-102241-3
16 1.600 [40.64] .800 [20.32] .700 [17.78] 1-102241-4
17 1.700 [43.18] .800 [20.32] .800 [20.32] 1-102241-5
18 1.800 [45.72] .900 [22.86] .800 [20.32] 1-102241-6
19 1.900 [48.26] .900 [22.86] .900 [22.86] 1-102241-7
20 2.000 [50.80] 1.000 [25.40] .900 [22.86] 1-102241-8
21 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 1-102241-9
22 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 2-102241-0
23 2.300 [58.42] 1.100 [27.94] 1.100 [27.94] 2-102241-1
24 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 2-102241-2
25 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2-102241-3
26 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] 2-102241-4
27 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 2-102241-5
28 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] 2-102241-6
29 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 2-102241-7
30 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2-102241-8
31 3.100 [78.74] 1.500 [38.10] 1.500 [38.10] 2-102241-9
32 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 3-102241-0
33 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 3-102241-1
34 3.400 [86.36] 1.700 [43.18] 1.600 [40.64] 3-102242-2
35 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 3-102241-3
36 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] 3-102241-4
*No marking on housing.
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 115, 116
Flexible Film Connectors,
Single-Row Pin Assemblies —
Catalog 82007
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Section X-X
216
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
No. Part Nos.
of Dimensions C = .600 [15.24] C = .645 [16.38]
Pos. ABStamped* Unstamped** Unstamped**
2.100 [2.54] ——5-87456-3 —
4.200 [5.08] .100 [2.54] 5-87456-0 4-87456-9 2-86177-5
6.300 [7.62] .200 [5.08] 87456-2 87456-1 1-86177-8
8.400 [10.16] .300 [7.62] 87456-4 87456-3 2-86177-0
10 .500 [12.70] .400 [10.16] 87456-6 87456-5 1-86177-2
12 .600 [15.24] .500 [12.70] 87456-8 87456-7 1-86177-3
14 .700 [17.78] .600 [15.24] 1-87456-0 87456-9 1-86177-4
16 .800 [20.32] .700 [17.78] 1-87456-2 1-87456-1 1-86177-5
18 .900 [22.86] .800 [20.32] 1-87456-4 1-87456-3 1-86177-6
20 1.000 [25.40] .900 [22.86] 1-87456-6 1-87456-5 86177-1
22 1.100 [27.94] 1.000 [25.40] — 1-87456-7 86177-2
24 1.200 [30.48] 1.100 [27.94] 2-87456-0 1-87456-9 86177-3
26 1.300 [33.02] 1.200 [30.48] 2-87456-2 2-87456-1 86177-4
28 1.400 [35.56] 1.300 [33.02] 2-87456-4 2-87456-3 86177-5
30 1.500 [38.10] 1.400 [35.56] 2-87456-6 2-87456-5 86177-6
32 1.600 [40.64] 1.500 [38.10] 2-87456-8 2-87456-7 86177-7
34 1.700 [43.18] 1.600 [40.64] 3-87456-0 2-87456-9 86177-8
36 1.800 [45.72] 1.700 [43.18] 3-87456-2 3-87456-1 86177-9
38 1.900 [48.26] 1.800 [45.72] — 3-87456-3 1-86177-0
40 2.000 [50.80] 1.900 [48.26] 3-87456-6 3-87456-5 1-86177-1
42 2.100 [53.34] 2.000 [50.80] 4-87456-4 4-87456-3 —
44 2.200 [55.88] 2.100 [53.34] 3-87456-8 3-87456-7 1-86177-7
48 2.400 [60.96] 2.300 [58.42] 6-87456-0 5-87456-9 2-86177-3
50 2.500 [63.50] 2.400 [60.96] 4-87456-0 3-87456-9 2-86177-1
52 2.600 [66.04] 2.500 [63.50] 4-87456-2 4-87456-1 1-86177-9
54 2.700 [68.58] 2.600 [66.04] — 4-87456-5 —
56 2.800 [71.12] 2.700 [68.58] — 6-87456-1 —
58 2.900 [73.66] 2.800 [71.12] — 6-87456-3 —
60 3.000 [76.20] 2.900 [73.66] 5-87456-2 5-87456-1 —
64 3.200 [81.28] 3.100 [78.74] 6-87456-6 6-87456-5 —
66 3.300 [83.82] 3.200 [81.28] 5-87456-4 5-87456-7 —
70 3.500 [88.90] 3.400 [86.36] — 5-87456-5 2-86177-4
72 3.600 [91.44] 3.500 [88.90] 4-87456-8 4-87456-7 —
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
B
Non-Polarized
.100
[2.54]
X
.100
[2.54] Typ.
.175
[4.45]
A
.240
[6.10]
.070
[1.78]
.050
[1.27]
Typ.
.072
[1.83]
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-1
(for .645 high housings)
Part No. 87077-2
(for .600 high housings)
(Plugs directly into housing)
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 96-99, 104, 105, 117-120
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Section X-X
XCR
Optional
217
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
No. of Dimensions Part Nos.
Pos. ABC Stamped* Unstamped**
6.300 [7.62] .100 [2.54] .100 [2.54] 87977-1 2-87977-8
8.400 [10.16] .200 [5.08] .100 [2.54] 87977-2 2-87977-9
10 .500 [12.70] .200 [5.08] .200 [5.08] 87977-3 3-87977-0
12 .600 [15.24] .300 [7.62] .200 [5.08] 87977-4 3-87977-1
14 .700 [17.78] .300 [7.62] .300 [7.62] 87977-5 3-87977-2
16 .800 [20.32] .400 [10.16] .300 [7.62] 87977-6 3-87977-3
18 .900 [22.86] .400 [10.16] .400 [10.16] — 3-87977-4
20 1.000 [25.40] .500 [12.70] .400 [10.16] 87977-8 3-87977-5
22 1.100 [27.94] .500 [12.70] .500 [12.70] — 3-87977-6
24 1.200 [30.48] .600 [15.24] .500 [12.70] 1-87977-0 3-87977-7
26 1.300 [33.02] .600 [15.24] .600 [15.24] 1-87977-1 3-87977-8
28 1.400 [35.56] .700 [17.78] .600 [15.24] — 3-87977-9
30 1.500 [38.10] .700 [17.78] .700 [17.78] — 4-87977-0
32 1.600 [40.64] .800 [20.32] .700 [17.78] — 4-87977-1
34 1.700 [43.18] .800 [20.32] .800 [20.32] — 4-87977-2
36 1.800 [45.72] .900 [22.86] .800 [20.32] — 4-87977-3
38 1.900 [48.26] .900 [22.86] .900 [22.86] — 4-87977-4
40 2.000 [50.80] 1.000 [25.40] .900 [22.86] 1-87977-8 4-87977-5
42 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] — 4-87977-6
44 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] — 4-87977-7
48 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] — 5-87977-6
50 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2-87977-1 4-87977-8
52 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] — 4-87977-9
54 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] — 5-87977-0
56 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] — 5-87977-8
58 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] — 6-87977-0
60 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2-87977-4 5-87977-1
64 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] — 6-87977-2
66 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] — 5-87977-2
70 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] — 5-87977-3
72 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] — 5-87977-4
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing or strain relief.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
A
Polarized
.175
[4.45]
.600
[15.24]
.240
[6.10]
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts—
pages 117-131
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Strain Relief Locators
(on Housings 20 Positions
and Larger)
.100
[2.54]
.070
[1.78]
.100
[2.54]
Typ.
±.003
[±0.08]
B±.003
[±0.08]
C
X
X
.100
[2.54]
T
yp. Typ.
Section X-X
R
Optional
.050
[1.27]
T
yp.
218
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Polarized (with Detent
Latching, with and without
Strain Relief/Pull Tab)
.100
[2.54]
X
.100
[2.54] T
yp.
.175
[4.45]
A
.240
[6.10]
.070
[1.78]
Typ.
.050
[1.27]
T
yp.
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 117-125, 127-133
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Section X-X
X
.600
[15.24]
R
Optional
.100
[2.54] T
yp.
±.003
[±0.08]
B±.003
[±0.08]
C
.095
[2.41]
Dia.
.500
[12.70]
1.150
[29.21] .095
[2.41]
Dia.
1.000
[25.40]
1.900
[48.26]
Strain Relief Locators
(on Housings 20 Positions
and Larger)
Housing with
Strain Relief/Pull Tab
Strain Relief Part No. 87921-1
(10 thru 18 positions)
Housing with
Strain Relief/Pull Tab
Strain Relief Part No. 87710-1
(20 positions and larger)
Part Nos.
No. of Dimensions No. of Without Strain Relief With Strain Relief
Pos. ABC
Detents Stamped* Unstamped** Stamped*
6.300 [7.62] .100 [2.54] .100 [2.54] 1 87631-2 87631-1 —
8.400 [10.16] .200 [5.08] .100 [2.54] 1 87631-4 87631-3 —
10 .500 [12.70] .200 [5.08] .200 [5.08] 1 87631-6 87631-5 87922-1
12 .600 [15.24] .300 [7.62] .200 [5.08] 1 87631-8 87631-7 87922-2
14 .700 [17.78] .300 [7.62] .300 [7.62] 1 1-87631-0 87631-9 87922-3
16 .800 [20.32] .400 [10.16] .300 [7.62] 1 1-87631-2 1-87631-1 87922-4
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.
219
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Part Nos.
No. of Dimensions No. of Without Strain Relief With Strain Relief
Pos. ABC
Detents Stamped* Unstamped** Stamped*
18 .900 [22.86] .400 [10.16] .400 [10.16] 1 1-87631-4 1-87631-3 87922-5
201.000 [25.40] .500 [12.70] .400 [10.16] 2 1-87631-6 1-87631-5 87733-1
221.100 [27.94] .500 [12.70] .500 [12.70] 2 1-87631-8 1-87631-7 —
24 1.200 [30.48] .600 [15.24] .500 [12.70] 2 2-87631-0 1-87631-9 87733-3
261.300 [33.02] .600 [15.24] .600 [15.24] 2 2-87631-2 2-87631-1 87733-4
281.400 [35.56] .700 [17.78] .600 [15.24] 2 2-87631-4 2-87631-3 —
30 1.500 [38.10] .700 [17.78] .700 [17.78] 2 2-87631-6 2-87631-5 87733-6
32 1.600 [40.64] .800 [20.32] .700 [17.78] 2 2-87631-8 2-87631-7 87733-7
341.700 [43.18] .800 [20.32] .800 [20.32] 2 3-87631-0 2-87631-9 87733-8
361.800 [45.72] .900 [22.86] .800 [20.32] 2 3-87631-2 3-87631-1 —
38 1.900 [48.26] .900 [22.86] .900 [22.86] 2—3-87631-3 —
40 2.000 [50.80] 1.000 [25.40] .900 [22.86] 2 3-87631-6 3-87631-5 1-87733-1
422.100 [53.34] 1.000 [25.40] 1.000 [25.40] 2 3-87631-8 3-87631-7 —
44 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 2 4-87631-0 3-87631-9 —
48 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 2—5-87631-9 —
502.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2 4-87631-2 4-87631-1 1-87733-4
522.600 [66.04] 1.300 [33.02] 1.200 [30.48] 2—4-87631-3 —
54 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 2 4-87631-6 4-87631-5 —
58 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 2—6-87631-3 —
603.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2 5-87631-2 5-87631-1 1-87733-7
64 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 2 6-87631-6 6-87631-5 —
66 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 2—5-87631-3 —
70 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 2—5-87631-5 —
72 3.800 [96.52] 1.800 [45.72] 1.700 [43.18] 2 5-87631-8 5-87631-7 —
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.
220
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Center Polarized
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
AMP-LATCH Low Profile Headers,
Shrouded — pages 135-140
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Position No. 1 Indicator
ROptional
Section X-X
.030
[0.76]
.130
[3.30]
.285
[7.24]
.072
[1.83]
.600
[15.24]
.120
[3.05]
.100
[2.54]
.227
[5.77]
.130
[3.30]
B
A
C
X
X
No. of Dimensions Part Nos.
Pos. ABC(Stamped*)
8.580 [14.73] .225 [5.72] .300 [7.62] 1-102387-4
10 .680 [17.27] .275 [6.98] .400 [10.16] 102387-1
14 .880 [22.35] .375 [9.53] .600 [15.24] 102387-2
16 .980 [24.89] .425 [10.80] .700 [17.78] 102387-3
20 1.180 [29.97] .525 [13.34] .900 [22.86] 102387-4
22 1.280 [32.51] .575 [14.61] 1.000 [25.40] 1-102387-5
24 1.380 [35.05] .625 [15.88] 1.100 [27.94] 102387-5
26 1.480 [37.59] .675 [17.15] 1.200 [30.48] 102387-6
30 1.680 [42.67] .775 [19.69] 1.400 [35.56] 102387-7
34 1.880 [47.75] .875 [22.23] 1.600 [40.64] 102387-8
40 2.180 [55.37] 1.025 [26.04] 1.900 [48.26] 102387-9
44 2.380 [60.45] 1.125 [28.58] 2.100 [53.34] 1-102387-3
50 2.680 [68.07] 1.275 [32.39] 2.400 [60.96] 1-102387-0
60 3.180 [80.77] 1.525 [38.74] 2.900 [73.66] 1-102387-1
64 3.380 [85.85] 1.625 [41.28] 3.100 [78.74] 1-102387-2
*Cavity identification and TE stamped on housing.
†Non-functional slot is used for gating purposes during injection molding process. This gating feature is not inherent in
all production molds. Therefore, the depicted slot will only be present on housings produced on mold tooling requiring
this gating feature.
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
.570
[14.88]
.150†
[3.81]
221
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Short Point, Crimp Snap-In Wire-Applied Contacts and Housings
Note: All part numbers are RoHS compliant.
Short Point, Crimp Snap-In Wire-
Applied Contacts and Housings
Wire-to-Board
103688-9 MTE Recept. Housing
1-104479-1 Short Point Contact
104257-5 MTE Recept. Housing
1-104480-5 Short Point Contact
104482-9 Short Point Recept. Housing
5-104481-6 Short Point Contact
104257-3 MTE Recept. Housing
1-104480-4 Short Point Contact
5-104450-3 MTE Hdr 1-87232-0 Hdr
Product Facts
■Short point of contact
mates with .169 [4.29]
to .259 [6.58] long post
■Double-row housings are
end-to-end and side-to-side
stackable
■Terminates 32-20 AWG
[0.03-0.6 mm2] discrete
wire
■Contacts have insulation
support to accept a
maximum insulation
diameter of .060 [1.52]
■Available with .000015
[0.00038] or .000030
[0.00076] gold duplex,
or tin plating
■Mates with .025 [0.64]
square posts
■Dual cantilever contact
beams for reliable matings
■Locking retention latch
provides approximately
3 lb [13.34 N] of retention
force
■Unique locking latch design
helps prevent latch from
protruding through latch
window
■Contacts snap into
AMPMODU MTE single-row
housings
■Double-row housing
configurations include
.100 [2.54] centerline,
plain and polarized
■Housing sizes range from
4 to 52 positions
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by
Canadian Standards
Association,
File No. LR7189
■Produced under a Quality
Management System
certified to ISO
9001
A copy of the
certificate is available
upon request
AMPMODU Short Point
receptacle contacts are
designed to mate with .025
[0.64] square posts. They
will mate with posts as short
as .169 [4.29].
Short Point double-row
housings are end-to-end
and side-to-side stackable
on .100 [2.54] centers.
Contacts also can be used
in single-row AMPMODU
MTE housings to provide
a complete wire-crimp
system, or to serve as
replacement contacts.
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.)
Durability — Ref. Product
Specification 108-1472
R
R
ISO
Certified
9001
222
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Short Point Crimp Snap-In Receptacle Contacts
Note: All part numbers are RoHS compliant.
Short Point Contacts
.068
[1.73]
CC
.060
[1.52]
.460
[11.68]
Section C - C
.012
[0.30]
Gap
Quick-Change
Wire Size Applicator for
Applicator for
Range Ins.
Finish
Contact Part No. AMP-O-MATIC Hand
AWG [mm2]
Dia. (Standard Pressure) AMP-O-LECTRIC Stripper/Crimper Tool
Range Strip Form Loose Piece Machine* Machine Nos.
Plating A 1-104481-1 1-104481-3
32-28 0.03-0.08 .025-.060 [0.64-1.52] Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1
Plating C 5-104481-2 5-104481-6
.Plating A 1-104480-3 1-104480-6
26-22 0.13-0.3 .025-.060 [0.64-1.52] Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1
Plating C 1-104480-7 1-104480-4
.Plating A 1-104479-0 1-104479-3
24-20 0.2-0.5 .025-.060 [0.64-1.52] Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1
Plating C 104479-8 1-104479-1
*For use with Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-722-1111) for part nos. of applicators for use with the Model “G”
machines (shown on page 288), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required. Extraction/Lance Reset
Tool No. 843477-1
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
page 270-272
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
223
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Short Point Wire-Applied Housings, Double-Row, Non-Polarized,
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Short Point
Wire-Applied Housings
No. of Dimensions Housing
Pos. AB Part No.
4.198 [5.03] .100 [2.54] 104482-1
6.298 [7.57] .200 [5.08] 104482-2
8.398 [10.11] .300 [7.62] 104482-3
10 .498 [12.65] .400 [10.16] 104482-4
12 .598 [15.19] .500 [12.70] 104482-5
14 .698 [17.73] .600 [15.24] 104482-6
16 .798 [20.27] .700 [17.78] 104482-7
18 .898 [22.81] .800 [20.32] 104482-8
20 .998 [25.35] .900 [22.86] 104482-9
22 1.098 [27.89] 1.000 [25.40] 1-104482-0
26 1.298 [32.97] 1.200 [30.48] 1-104482-1
28 1.398 [35.51] 1.300 [33.02] 1-104482-2
30 1.498 [38.05] 1.400 [35.56] 1-104482-3
32 1.598 [40.59] 1.500 [38.10] 1-104482-4
34 1.698 [43.13] 1.600 [40.64] 1-104482-5
36 1.798 [45.67] 1.700 [43.18] 1-104482-6
38 1.898 [48.21] 1.800 [45.72] 1-104482-7
40 1.998 [50.75] 1.900 [48.26] 1-104482-8
44 2.198 [55.83] 2.100 [53.34] 1-104482-9
52 2.598 [65.99] 2.500 [63.50] 2-104482-0
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 221
Contacts — page 222
Mateable Headers —
pages 104, 105
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
B
X
XSection X-X
A
.049
[1.24]
.100 T
yp.
[2.54]
.198
[5.03]
.036
[0.91]
0.72
[1.83]
.600
[15.24]
.100
[2.54]
.049 2 Plc.
[1.24]
224
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Short Point Wire-Applied Housings, Double-Row, Polarized, .100 x .100
[2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
Short Point
Wire-Applied Housings
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 221
Contacts — page 222
Mateable Headers —
pages 104, 105, 135-138
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
B
A
X
X
.049
[1.24]
.100 T
yp.
[2.54]
.198
[5.03]
.100
[2.54]
.100
[2.54] .095
[2.41]
.100
[2.54] Section X-X
.036
[0.91]
0.72
[1.83]
.600
[15.24]
No.of Dimensions Housing
Pos. AB Part No.
8.398 [10.11] .300 [7.62] 104483-1
10 .498 [12.65] .400 [10.16] 1-104483-1
12 .598 [15.19] .500 [12.70] 1-104483-2
14 .698 [17.73] .600 [15.24] 104483-9
18 .898 [22.81] .800 [20.32] 104483-2
20 .998 [25.35] .900 [22.86] 104483-3
26 1.298 [32.97] 1.200 [30.48] 104483-4
30 1.498 [38.05] 1.400 [35.56] 104483-5
38 1.898 [48.21] 1.800 [45.72] 104483-6
50 2.498 [63.45] 2.400 [60.96] 1-104483-3
52 2.598 [65.99] 2.500 [63.50] 1-104483-0
54 2.698 [68.53] 2.600 [66.04] 104483-7
64 3.198 [81.23] 3.100 [78.74] 104483-8
Note: Other sizes can be made available on request.
.049 2 Plc.
[1.24]
225
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Interconnection System
MTE Interconnection System
Performance
Specifications
Electrical Characteristics
Contact Current Rating —
3 amperes for single contact in free air
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Contact Termination
Resistance — 15 milliohms (max.)
Dielectric Withstanding Voltage —
At Sea Level–600 VAC, rms
At 70,000 Ft. [21 336 m]–225 VAC, rms
Insulation Resistance —
5,000 megohms (min.)
Environmental Characteristics
Operating Temperature —
-65°C to +105°C
Vibration — 15 G’s (gold), 10 G’s (tin)
Physical Shock — 50 G’s
Industrial Mixed Flow Gasing —
Class 1 (20 days) (gold)
Product Specification
108-25034
Application Specification
114-25026
Product Facts
■Receptacle assemblies mate
with .025 [0.64] sq. posts;
mating post length is .200
[5.08] min., .250 [6.35] max.
■Proven AMPMODU receptacle
contact design; dual
cantilever beams, built-in
anti-overstress, completely
enclosed “box” design,
standard or high-pressure
■Insulation displacement
technology
■Two contact sizes for
terminating 30-22 AWG [0.05-
0.3 mm2] wire range; .054
[1.37] max. insulation diam -
eter with an insulation wall
thickness of .015 [0.38] max.
■Choice of gold duplex or tin
plated contacts
■Interchangeable crimp
snap-in pin and receptacle
contacts available
■Housing sizes 2 through
25 positions, single-row .100
[2.54] centers
■Plain housings are end-to-end
and/or back-to-back stackable
for open pin field applications
■Optional header with
“swaged tail” feature helps
prevent movement prior to
flow soldering
■Integral latch provides
positive retention between
header and receptacle
housing
■Coupling shrouds permit
ganging of smaller connectors
with guide ribs to form larger
single- or double-row
latching connectors
■Mass terminating tooling
provides lowest applied cost
for most production needs
■SMT and SMT compatible,
high-temp headers available
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
The AMPMODU MTE
Interconnection System
offers both wire-to-board
and wire-to-wire connectors
using .025 [0.64] sq. post
technology.
The AMPMODU MTE
Interconnection System
consists of single-row
housings with contacts
preloaded on .100 [2.54]
centers. Housings are
furnished with contacts
partially inserted, leaving
the termination areas
exposed. Final contact
insertion can be
accomplished automatically
with TE application
equipment, and manually
when terminated with the TE
pistol grip hand tool.
The heart of the system is
the insulation displacement
contact design, featured in
both pin and receptacle
contacts. The receptacle
contact, available in either
standard or high-pressure,
features dual cantilever
beams in an enclosed
“box.” The post stop helps
prevent a mating post from
disturbing the wire
termination and also limits
the mating depth of a long
post to protect a wrap-type
termination at the base of
the post. The forward
contact stop helps prevent
contact overinsertion prior
to termination. All contacts
are furnished on carrier
strips which are interlocked
for stability and positive
location during termination.
Single-row housings are
available in sizes 2 through
25 positions. Included are
three styles of receptacle
housings—plain, polarized/
latching and ribbed and two
styles of pin housings,
shrouded with polarizing/
latching feature and ribbed.
R
R
226
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Interconnection System (Continued)
MTE Interconnection System
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Assemblies
Polarized/Latching
(See pages 230 & 231)
Double-Row Coupling
Shroud (See page 241)
AMPMODU Shrouded
Headers, Double-Row,
Straight or Right Angle
Post1(See pages
119-121, 124, 125, 127,
128, 131-133 & 149)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Contact,
Insulation Displacement
(Used in all
Receptacle Assemblies)
AMPMODU Breakaway Headers,
Single- or Double-Row, Straight
or Right–Angle Post, with or
without Board Retention Feature
(See pages 102-105)
Receptacle Assemblies Plain
(See pages 228 and 229)
High Pressure Receptacle Assemblies,
Plain (See page 234)
Receptacle
Assemblies,
Polarized/Latching (See
pages 230 & 231)
High-Temp Headers,
Polarized/Latching, Straight
and Right Angle Post,
with or without Holddown
(See pages 249 & 250)2
Headers,
Polarized/Latching,
Straight Post, with or
without Swaged Tail
(See pages 244 & 245)2
Headers,
Polarized/Latching,
Right Angle Post, with
or without Holddown
(See pages 246 & 247)
1Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last
1post to inside of end shroud wall.
2Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252)
Wire-to-Board
Single-Row Coupling
Shroud (See page 240)
227
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Interconnection System (Continued)
MTE Interconnection System
Receptacle Contact,
Insulation Displacement
(Used in all
Receptacle Assemblies)
Crimp Snap-In
Receptacle Contact
(Used with Unloaded
Housings—
See page 253)
Crimp Snap-In Pin
Contact (Used with
Unloaded Housings—
See page 254)
Pin Contact,
Insulation
Displacement
(Used in all Pin
Assemblies)
Pin Assemblies, Shrouded
Polarized/Latching
(See pages 236 & 237)
Receptacle Assemblies,
Polarized/Latching
(See pages 230 & 231)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Single-Row
Coupling
Shroud (See
page 240)
Panel Mount
Pin Shroud
(See page 242)
Pin Assemblies
with Guide Ribs (See
pages 238 & 239)
Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable.
Wire-to-Wire
228
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline
MTE Receptacle Assemblies
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
TE Manual Pistol Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110 (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Single-Row Shrouded Headers
with .066 [1.68] End Dimension —
pages 115, 116
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Typ.
B
Typ.
A
.520
[13.21]
These receptacle assemblies
with plain housings can be
stacked end-to-end and/or side-
to-side for single or double-row
connections to an open pin field
with a .100 [2.54] centerline grid.
229
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Receptacle Assemblies—Strip Form Plain,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Receptacle Assemblies—Individual Form Plain,
Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103979-1 5-103978-1 5-103977-1 5-103976-1 5-103975-1 5-103974-1 103688-1
32.400 [60.96] .298 [7.57] 8 5-103979-2 5-103978-2 5-103977-2 5-103976-2 5-103975-2 5-103974-2 103688-2
41.990 [50.55] .398 [10.11] 5 5-103979-3 5-103978-3 5-103977-3 5-103976-3 5-103975-3 5-103974-3 103688-3
51.990 [50.55] .498 [12.65] 4 5-103979-4 5-103978-4 5-103977-4 5-103976-4 5-103975-4 5-103974-4 103688-4
62.390 [60.71] .598 [15.19] 4 5-103979-5 5-103978-5 5-103977-5 5-103976-5 5-103975-5 5-103974-5 103688-5
71.400 [35.56] .698 [17.73] 2 5-103979-6 5-103978-6 5-103977-6 5-103976-6 5-103975-6 5-103974-6 103688-6
81.600 [40.64] .798 [20.27] 2 5-103979-7 5-103978-7 5-103977-7 5-103976-7 5-103975-7 5-103974-7 103688-7
91.800 [45.72] .898 [22.81] 2 5-103979-8 5-103978-8 5-103977-8 5-103976-8 5-103975-8 5-103974-8 103688-8
102.000 [50.80] .998 [23.35] 2 5-103979-9 5-103978-9 5-103977-9 5-103976-9 5-103975-9 5-103974-9 103688-9
112.200 [55.88] 1.098 [27.89] 2 6-103979-0 6-103978-0 6-103977-0 6-103976-0 6-103975-0 6-103974-0 1-103688-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103979-1 6-103978-1 6-103977-1 6-103976-1 6-103975-1 6-103974-1 1-103688-1
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103903-2 6-103684-2 6-103685-2 6-103902-2 6-103686-2 6-103687-2 1-103688-2
14 1.398 [35.51] 6-103903-3 6-103684-3 6-103685-3 6-103902-3 6-103686-3 6-103687-3 1-103688-3
15 1.498 [38.05] 6-103903-4 6-103684-4 6-103685-4 6-103902-4 6-103686-4 6-103687-4 1-103688-4
16 1.598 [40.59] 6-103903-5 6-103684-5 6-103685-5 6-103902-5 6-103686-5 6-103687-5 1-103688-5
17 1.698 [43.13] 6-103903-6 6-103684-6 6-103685-6 6-103902-6 6-103686-6 6-103687-6 1-103688-6
18 1.798 [45.67] 6-103903-7 6-103684-7 6-103685-7 6-103902-7 6-103686-7 6-103687-7 1-103688-7
19 1.898 [48.20] 6-103903-8 6-103684-8 6-103685-8 6-103902-8 6-103686-8 6-103687-8 1-103688-8
20 1.998 [50.75] 6-103903-9 6-103684-9 6-103685-9 6-103902-9 6-103686-9 6-103687-9 1-103688-9
21 2.098 [53.29] 7-103903-0 7-103684-0 7-103685-0 7-103902-0 7-103686-0 7-103687-0 2-103688-0
22 2.198 [55.83] 7-103903-1 7-103684-1 7-103685-1 7-103902-1 7-103686-1 7-103687-1 2-103688-1
23 2.298 [58.37] 7-103903-2 7-103684-2 7-103685-2 7-103902-2 7-103686-2 7-103687-2 2-103688-2
24 2.398 [60.91] 7-103903-3 7-103684-3 7-103685-3 7-103902-3 7-103686-3 7-103687-3 2-103688-3
25 2.498 [63.45] 7-103903-4 7-103684-4 7-103685-4 7-103902-4 7-103686-4 7-103687-4 2-103688-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with TE application machines, or manually when terminated with
TE
pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
230
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Receptacle Assemblies—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
MTE Receptacle Assemblies
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Mateable AMPMODU Products
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide
Ribs (installed in Panel Mount
Pin Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Typ.
B
T
yp.
A
.520
[13.21]
Preassembled housings in strip
form are available in positions 2 thru
12. For ease of handling, positions
2 thru 5 are recommended when
using the TE Manual Pistol Grip
Tool.
231
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Receptacle Assemblies—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103961-1 5-103960-1 5-103959-1 5-103958-1 5-103957-1 5-103956-1 104257-1
32.400 [60.96] .298 [7.57] 8 5-103961-2 5-103960-2 5-103959-2 5-103958-2 5-103957-2 5-103956-2 104257-2
41.990 [50.55] .398 [10.11] 5 5-103961-3 5-103960-3 5-103959-3 5-103958-3 5-103957-3 5-103956-3 104257-3
51.990 [50.55] .498 [12.65] 4 5-103961-4 5-103960-4 5-103959-4 5-103958-4 5-103957-4 5-103956-4 104257-4
62.390 [60.71] .598 [15.19] 4 5-103961-5 5-103960-5 5-103959-5 5-103958-5 5-103957-5 5-103956-5 104257-5
71.400 [35.56] .698 [17.73] 2 5-103961-6 5-103960-6 5-103959-6 5-103958-6 5-103957-6 5-103956-6 104257-6
81.600 [40.64] .798 [20.27] 2 5-103961-7 5-103960-7 5-103959-7 5-103958-7 5-103957-7 5-103956-7 104257-7
91.800 [45.72] .898 [22.81] 2 5-103961-8 5-103960-8 5-103959-8 5-103958-8 5-103957-8 5-103956-8 104257-8
102.000 [50.80] .998 [23.35] 2 5-103961-9 5-103960-9 5-103959-9 5-103958-9 5-103957-9 5-103956-9 104257-9
112.200 [55.88] 1.098 [27.89] 2 6-103961-0 6-103960-0 6-103959-0 6-103958-0 6-103957-0 6-103956-0 1-104257-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103961-1 6-103960-1 6-103959-1 6-103958-1 6-103957-1 6-103956-1 1-104257-1
MTE Receptacle Assemblies—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103897-2 6-103640-2 6-103641-2 6-103734-2 6-103644-2 6-103645-2 1-104257-2
14 1.398 [35.51] 6-103897-3 6-103640-3 6-103641-3 6-103734-3 6-103644-3 6-103645-3 1-104257-3
15 1.498 [38.05] 6-103897-4 6-103640-4 6-103641-4 6-103734-4 6-103644-4 6-103645-4 1-104257-4
16 1.598 [40.59] 6-103897-5 6-103640-5 6-103641-5 6-103734-5 6-103644-5 6-103645-5 1-104257-5
17 1.698 [43.13] 6-103897-6 6-103640-6 6-103641-6 6-103734-6 6-103644-6 6-103645-6 1-104257-6
18 1.798 [45.67] 6-103897-7 6-103640-7 6-103641-7 6-103734-7 6-103644-7 6-103645-7 1-104257-7
19 1.898 [48.20] 6-103897-8 6-103640-8 6-103641-8 6-103734-8 6-103644-8 6-103645-8 1-104257-8
20 1.998 [50.75] 6-103897-9 6-103640-9 6-103641-9 6-103734-9 6-103644-9 6-103645-9 1-104257-9
21 2.098 [53.29] 7-103897-0 7-103640-0 7-103641-0 7-103734-0 7-103644-0 7-103645-0 2-104257-0
22 2.198 [55.83] 7-103897-1 7-103640-1 7-103641-1 7-103734-1 7-103644-1 7-103645-1 2-104257-1
23 2.298 [58.37] 7-103897-2 7-103640-2 7-103641-2 7-103734-2 7-103644-2 7-103645-2 2-104257-2
24 2.398 [60.91] 7-103897-3 7-103640-3 7-103641-3 7-103734-3 7-103644-3 7-103645-3 2-104257-3
25 2.498 [63.45] 7-103897-4 7-103640-4 7-103641-4 7-103734-4 7-103644-4 7-103645-4 2-104257-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
232
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Receptacle Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
MTE Receptacle Assemblies
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended
when using the TE Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Typ
B
T
yp.
A
.520
[13.21]
Interchangeable Crimp Contacts—
(Short Point) — page 253
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
233
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Receptacle Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Receptacle Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103973-1 5-103972-1 5-103971-1 5-103970-1 5-103969-1 5-103968-1 103648-1
32.400 [60.96] .298 [7.57] 8 5-103973-2 5-103972-2 5-103971-2 5-103970-2 5-103969-2 5-103968-2 103648-2
41.990 [50.55] .398 [10.11] 5 5-103973-3 5-103972-3 5-103971-3 5-103970-3 5-103969-3 5-103968-3 103648-3
51.990 [50.55] .498 [12.65] 4 5-103973-4 5-103972-4 5-103971-4 5-103970-4 5-103969-4 5-103968-4 103648-4
62.390 [60.71] .598 [15.19] 4 5-103973-5 5-103972-5 5-103971-5 5-103970-5 5-103969-5 5-103968-5 103648-5
71.400 [35.56] .698 [17.73] 2 5-103973-6 5-103972-6 5-103971-6 5-103970-6 5-103969-6 5-103968-6 103648-6
81.600 [40.64] .798 [20.27] 2 5-103973-7 5-103972-7 5-103971-7 5-103970-7 5-103969-7 5-103968-7 103648-7
91.800 [45.72] .898 [22.81] 2 5-103973-8 5-103972-8 5-103971-8 5-103970-8 5-103969-8 5-103968-8 103648-8
102.000 [50.80] .998 [23.35] 2 5-103973-9 5-103972-9 5-103971-9 5-103970-9 5-103969-9 5-103968-9 103648-9
112.200 [55.88] 1.098 [27.89] 2 6-103973-0 6-103972-0 6-103971-0 6-103970-0 6-103969-0 6-103968-0 1-103648-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103973-1 6-103972-1 6-103971-1 6-103970-1 6-103969-1 6-103968-1 1-103648-1
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103901-2 6-103649-2 6-103650-2 6-103900-2 6-103651-2 6-103652-2 1-103648-2
14 1.398 [35.51] 6-103901-3 6-103649-3 6-103650-3 6-103900-3 6-103651-3 6-103652-3 1-103648-3
15 1.498 [38.05] 6-103901-4 6-103649-4 6-103650-4 6-103900-4 6-103651-4 6-103652-4 1-103648-4
16 1.598 [40.59] 6-103901-5 6-103649-5 6-103650-5 6-103900-5 6-103651-5 6-103652-5 1-103648-5
17 1.698 [43.13] 6-103901-6 6-103649-6 6-103650-6 6-103900-6 6-103651-6 6-103652-6 1-103648-6
18 1.798 [45.67] 6-103901-7 6-103649-7 6-103650-7 6-103900-7 6-103651-7 6-103652-7 1-103648-7
19 1.898 [48.20] 6-103901-8 6-103649-8 6-103650-8 6-103900-8 6-103651-8 6-103652-8 1-103648-8
20 1.998 [50.75] 6-103901-9 6-103649-9 6-103650-9 6-103900-9 6-103651-9 6-103652-9 1-103648-9
21 2.098 [53.29] 7-103901-0 7-103649-0 7-103650-0 7-103900-0 7-103651-0 7-103652-0 2-103648-0
22 2.198 [55.83] 7-103901-1 7-103649-1 7-103650-1 7-103900-1 7-103651-1 7-103652-1 2-103648-1
23 2.298 [58.37] 7-103901-2 7-103649-2 7-103650-2 7-103900-2 7-103651-2 7-103652-2 2-103648-2
24 2.398 [60.91] 7-103901-3 7-103649-3 7-103650-3 7-103900-3 7-103651-3 7-103652-3 2-103648-3
25 2.498 [63.45] 7-103901-4 7-103649-4 7-103650-4 7-103900-4 7-103651-4 7-103652-4 2-103648-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully
inserted into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
234
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE High Pressure Receptacle Assemblies—Plain,
Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] T
yp.
B
T
yp.
A
.520
[13.21]
Strip Form Strip Form
No. of Dimensions Housings Receptacle Receptacle
Pos. Quantities Per Assembly Assembly
AB
Strip Segment 30-26 AWG 26-22 AWG
[.05-.15mm2] Wire [.12-.30mm2] Wire
21.980 [50.29] .198 [5.03] 10 5-104438-1 5-104439-1
31.490 [37.85] .298 [7.57] 5 5-104438-2 5-104439-2
41.990 [50.55] .398 [10.11] 5 5-104438-3 5-104439-3
51.990 [50.55] .498 [12.65] 4 5-104438-4 5-104439-4
62.390 [60.71] .598 [15.19] 4 5-104438-5 5-104439-5
71.400 [35.56] .698 [17.73] 2 5-104438-6 5-104439-6
81.600 [40.64] .798 [20.27] 2 5-104438-7 5-104439-7
91.800 [45.72] .898 [22.81] 2 5-104438-8 5-104439-8
10 2.000 [50.80] .998 [23.35] 2 5-104438-9 5-104439-9
11 2.200 [55.88] 1.098 [27.89] 2 6-104438-0 6-104439-0
12 2.400 [60.96] 1.198 [30.43] 2 6-104438-1 6-104439-1
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched
into “preload” windows. Contacts are fully inserted into housings automatically when terminated with
TE application machines, or manually when terminated with TE pistol grip hand tool.
2. High pressure receptacle contacts can be made available in other housing styles and position sizes.
Contact your TE sales representative.
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
TE Manual Pistol Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050 [0.00127] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an
insulation wall thickness of .015 [0.38]
max. Mating post length for preloaded
housings is .200 [5.08] min., .250 [6.35]
max.
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110, (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278)
Product Specification
108-25034
Application Specification
114-25026
235
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE High Pressure Receptacle Assemblies – Guide Ribs
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
TE Manual Pistol Grip Tool.
Material and Finish
Housing — Thermoplastic, black,
94V-0 rated
Contacts — Phosphor Bronze,
duplex plated .000030 [0.00076] gold
on contact area, .000050 [0.00127] min.
tin on crimp area, with entire contact
underplated .000050 [0.00127] nickel.
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Typ
B
Typ.
A
.520
[13.21]
Strip Form Strip Form
No. of Dimensions Housings Receptacle Receptacle
Pos. Quantities Per Assembly Assembly
AB
Strip Segment 30-26 AWG 26-22 AWG
[.05-.15mm2] Wire [.12-.30mm2] Wire
21.980 [50.29] .198 [5.03] 10 5-147396-1 5-147030-3
31.490 [37.85] .298 [7.57] 5 5-147396-2 5-147030-4
41.990 [50.55] .398 [10.11] 5 5-147396-3 5-147030-1
51.990 [50.55] .498 [12.65] 4 5-147396-4 5-147030-2
62.390 [60.71] .598 [15.19] 4 5-147396-5 5-147030-5
71.400 [35.56] .698 [17.73] 2 5-147396-6 5-147030-6
81.600 [40.64] .798 [20.27] 2 5-147396-7 5-147030-7
91.800 [45.72] .898 [22.81] 2 5-147396-8 5-147030-8
10 2.000 [50.80] .998 [23.35] 2 5-147396-9 5-147030-9
11 2.200 [55.88] 1.098 [27.89] 2 6-147396-0 6-147030-0
12 2.400 [60.96] 1.198 [30.43] 2 6-147396-1 6-147030-1
236
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Pin Assemblies, Shrouded—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
MTE Pin Assemblies
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
TE Manual Pistol Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Related Product Data
Mateable AMPMODU Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.200
[5.08]
.100
[2.54] Typ.
Position No. 1
Indicator
1.470
[37.34]
.950
[24.13]
B
T
yp.
A
.520
[13.21]
.260
[6.60]
Pin Contacts
(See Note 1)
237
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Pin Assemblies, Shrouded—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Pin Assemblies, Shrouded—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
Housing Strip Form Pin Assembly Strip Form Pin Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.360 [59.94] .295 [7.49] 8 5-103949-1 5-103948-1 5-103947-1 5-103946-1 5-103945-1 5-103944-1 103653-1
31.980 [50.29] .395 [10.03] 5 5-103949-2 5-103948-2 5-103947-2 5-103946-2 5-103945-2 5-103944-2 103653-2
41.980 [50.29] .495 [12.57] 4 5-103949-3 5-103948-3 5-103947-3 5-103946-3 5-103945-3 5-103944-3 103653-3
52.380 [60.45] .595 [15.11] 4 5-103949-4 5-103948-4 5-103947-4 5-103946-4 5-103945-4 5-103944-4 103653-4
61.390 [35.31] .695 [17.65] 2 5-103949-5 5-103948-5 5-103947-5 5-103946-5 5-103945-5 5-103944-5 103653-5
72.390 [60.71] .795 [20.19] 3 5-103949-6 5-103948-6 5-103947-6 5-103946-6 5-103945-6 5-103944-6 103653-6
81.790 [45.47] .895 [22.73] 2 5-103949-7 5-103948-7 5-103947-7 5-103946-7 5-103945-7 5-103944-7 103653-7
91.990 [50.57] .995 [25.27] 2 5-103949-8 5-103948-8 5-103947-8 5-103946-8 5-103945-8 5-103944-8 103653-8
102.190 [55.63] 1.095 [27.81] 2 5-103949-9 5-103948-9 5-103947-9 5-103946-9 5-103945-9 5-103944-9 103653-9
112.390 [60.71] 1.195 [30.35] 2 6-103949-0 6-103948-0 6-103947-0 6-103946-0 6-103945-0 6-103944-0 1-103653-0
12 2.590 [65.79] 1.295 [32.89] 2 6-103949-1 6-103948-1 6-103947-1 6-103946-1 6-103945-1 6-103944-1 1-103653-1
No. of Dimensions Individual Pin Assembly Individual Pin Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.395 [35.43] 6-103894-2 6-103658-2 6-103659-2 6-103893-2 6-103660-2 6-103661-2 1-103653-2
14 1.495 [37.97] 6-103894-3 6-103658-3 6-103659-3 6-103893-3 6-103660-3 6-103661-3 1-103653-3
15 1.595 [40.51] 6-103894-4 6-103658-4 6-103659-4 6-103893-4 6-103660-4 6-103661-4 1-103653-4
16 1.695 [43.05] 6-103894-5 6-103658-5 6-103659-5 6-103893-5 6-103660-5 6-103661-5 1-103653-5
17 1.795 [45.59] 6-103894-6 6-103658-6 6-103659-6 6-103893-6 6-103660-6 6-103661-6 1-103653-6
18 1.895 [48.13] 6-103894-7 6-103658-7 6-103659-7 6-103893-7 6-103660-7 6-103661-7 1-103653-7
19 1.995 [50.67] 6-103894-8 6-103658-8 6-103659-8 6-103893-8 6-103660-8 6-103661-8 1-103653-8
20 2.095 [53.21] 6-103894-9 6-103658-9 6-103659-9 6-103893-9 6-103660-9 6-103661-9 1-103653-9
21 2.195 [55.75] 7-103894-0 7-103658-0 7-103659-0 7-103893-0 7-103660-0 7-103661-0 2-103653-0
22 2.295 [58.29] 7-103894-1 7-103658-1 7-103659-1 7-103893-1 7-103660-1 7-103661-1 2-103653-1
23 2.395 [60.83] 7-103894-2 7-103658-2 7-103659-2 7-103893-2 7-103660-2 7-103661-2 2-103653-2
24 2.495 [63.37] 7-103894-3 7-103658-3 7-103659-3 7-103893-3 7-103660-3 7-103661-3 2-103653-3
25 2.595 [65.91] 7-103894-4 7-103658-4 7-103659-4 7-103893-4 7-103660-4 7-103661-4 2-103653-4
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
238
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Pin Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
MTE Pin Assemblies
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
TE Manual Pistol Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Related Product Data
Mateable AMPMODU MTE Products
(with Pin Assembly Installed in
Panel Mount Pin Shroud) —
pages 242, 243
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.098
[2.49]
.100
[2.54] Typ.
Pin Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
B
Typ.
A
.520
[13.21]
239
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Pin Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Pin Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
No. of Dimensions Individual Pin Assembly Individual Pin Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.398 [35.51] 6-103896-2 6-103657-2 6-103656-2 6-103895-2 6-103655-2 6-103654-2 1-104503-2
14 1.498 [38.05] 6-103896-3 6-103657-3 6-103656-3 6-103895-3 6-103655-3 6-103654-3 1-104503-3
15 1.598 [40.59] 6-103896-4 6-103657-4 6-103656-4 6-103895-4 6-103655-4 6-103654-4 1-104503-4
16 1.698 [43.13] 6-103896-5 6-103657-5 6-103656-5 6-103895-5 6-103655-5 6-103654-5 1-104503-5
17 1.798 [45.67] 6-103896-6 6-103657-6 6-103656-6 6-103895-6 6-103655-6 6-103654-6 1-104503-6
18 1.898 [48.20] 6-103896-7 6-103657-7 6-103656-7 6-103895-7 6-103655-7 6-103654-7 1-104503-7
19 1.998 [50.75] 6-103896-8 6-103657-8 6-103656-8 6-103895-8 6-103655-8 6-103654-8 1-104503-8
20 2.098 [53.29] 6-103896-9 6-103657-9 6-103656-9 6-103895-9 6-103655-9 6-103654-9 1-104503-9
21 2.198 [55.83] 7-103896-0 7-103657-0 7-103656-0 7-103895-0 7-103655-0 7-103654-0 2-104503-0
22 2.298 [58.37] 7-103896-1 7-103657-1 7-103656-1 7-103895-1 7-103655-1 7-103654-1 2-104503-1
23 2.398 [60.91] 7-103896-2 7-103657-2 7-103656-2 7-103895-2 7-103655-2 7-103654-2 2-104503-2
24 2.498 [63.45] 7-103896-3 7-103657-3 7-103656-3 7-103895-3 7-103655-3 7-103654-3 2-104503-3
25 2.598 [65.99] 7-103896-4 7-103657-4 7-103656-4 7-103895-4 7-103655-4 7-103654-4 2-104503-4
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Housing Strip Form Pin Assembly Strip Form Pin Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
21.980 [50.29] 0.198 [5.03] 10 5-103955-1 5-103954-1 5-103953-1 5-103952-1 5-103951-1 5-103950-1 104503-1
31.490 [37.85] 0.298 [7.57] 5 5-103955-2 5-103954-2 5-103953-2 5-103952-2 5-103951-2 5-103950-2 104503-2
41.990 [50.55] 0.398 [10.11] 5 5-103955-3 5-103954-3 5-103953-3 5-103952-3 5-103951-3 5-103950-3 104503-3
51.990 [50.55] 0.498 [12.65] 4 5-103955-4 5-103954-4 5-103953-4 5-103952-4 5-103951-4 5-103950-4 104503-4
62.390 [60.71] 0.598 [15.19] 4 5-103955-5 5-103954-5 5-103953-5 5-103952-5 5-103951-5 5-103950-5 104503-5
71.400 [35.56] 0.698 [17.73] 2 5-103955-6 5-103954-6 5-103953-6 5-103952-6 5-103951-6 5-103950-6 104503-6
81.600 [40.64] 0.798 [20.27] 2 5-103955-7 5-103954-7 5-103953-7 5-103952-7 5-103951-7 5-103950-7 104503-7
91.800 [45.72] 0.898 [22.81] 2 5-103955-8 5-103954-8 5-103953-8 5-103952-8 5-103951-8 5-103950-8 104503-8
102.000 [50.80] 0.998 [25.35] 2 5-103955-9 5-103954-9 5-103953-9 5-103952-9 5-103951-9 5-103950-9 104503-9
112.200 [55.88] 1.098 [27.89] 2 6-103955-0 6-103954-0 6-103953-0 6-103952-0 6-103951-0 6-103950-0 1-104503-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103955-1 6-103954-1 6-103953-1 6-103952-1 6-103951-1 6-103950-1 1-104503-1
240
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs
Note: All part numbers are RoHS compliant.
MTE Coupling Shrouds
Pin Assembly,
Shrouded
Polarized/Latching
(Refer to pages
236 & 237)
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233, 235)
Headers, Polarized/Latching,
Straight and Right Angle Post,
with or without Holddown
(See pages 244-252)
Single-Row
Material
Black thermoplastic, 94V-0 rated
Single-Row
Coupling Shroud
.582
[14.78]
A.307
[7.80]
Pin Assemblies with Guide
Ribs, Installed in Panel
Mount Pin Shroud (Refer to
pages 238, 239 & 242)
No. of Dimension Single-Row
Pos. A Coupling Shroud
4.485 [12.32] 103680-1
5.585 [14.86] 103680-2
6.685 [17.40] 103680-3
7.785 [19.94] 103680-4
8.885 [22.48] 103680-5
9.985 [25.02] 103680-6
10 1.085 [27.56] 103680-7
111.185 [30.10] 103680-8
12 1.285 [32.64] 103680-9
131.385 [35.18] 1-103680-0
14 1.485 [37.72] 1-103680-1
No. of Dimension Single-Row
Pos. A Coupling Shroud
151.585 [40.26] 1-103680-2
16 1.685 [42.80] 1-103680-3
171.785 [45.34] 1-103680-4
18 1.885 [47.88] 1-103680-5
191.985 [50.42] 1-103680-6
20 2.085 [52.96] 1-103680-7
21 2.185 [55.50] 1-103680-8
222.285 [58.04] 1-103680-9
23 2.385 [60.58] 2-103680-0
242.485 [63.12] 2-103680-1
25 2.585 [65.66] 2-103680-2
Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
241
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued)
Note: All part numbers are RoHS compliant.
MTE Coupling Shrouds
AMPMODU Shrouded
Headers Double-Row, Straight
or Right–Angle Post1
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233 & 235)
1Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline
1of last post to inside of end shroud wall.
Double-Row
Material
Black thermoplastic, 94V-0 rated
Double-Row
Coupling Shroud
.735
[18.67]
A
Position No. 1
Identification
No. of Dimension Double-Row
Pos. A Coupling Shroud
8.585 [14.86] 103681-1
10 .685 [17.40] 103681-2
12 .785 [19.94] 103681-3
14.885 [22.48] 103681-4
16 .985 [25.02] 103681-5
181.085 [27.56] 104500-1
20 1.185 [30.10] 104500-2
221.285 [32.64] 104500-3
24 1.385 [35.18] 104500-4
26 1.485 [37.72] 104500-5
281.585 [40.26] 104500-6
30 1.685 [42.80] 104500-7
32 1.785 [45.34] 104500-8
34 1.885 [47.88] 104500-9
40 2.185 [55.50] 1-104500-0
50 2.685 [68.20] 1-104500-1
Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
242
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row
Note: All part numbers are RoHS compliant.
MTE Panel Mount
Pin Shrouds
Material
Black thermoplastic, 94V-0 rated
.990
[25.15]
A
Position No. 1
Identification
No. of Dimensions Panel Mount
Pos. AB
Pin Shroud
2.735 [18.67] .625 [15.88] 103682-1
3.835 [21.21] .725 [18.42] 103682-2
4.935 [23.75] .825 [20.96] 103682-3
51.035 [26.29] .925 [23.50] 103682-4
61.135 [28.83] 1.025 [26.04] 103682-5
71.235 [31.37] 1.125 [28.58] 103682-6
81.335 [33.91] 1.225 [31.12] 103682-7
91.435 [36.45] 1.325 [33.66] 103682-8
10 1.535 [38.99] 1.425 [36.20] 103682-9
11 1.635 [41.53] 1.525 [38.74] 1-103682-0
12 1.735 [44.07] 1.625 [41.28] 1-103682-1
13 1.835 [46.61] 1.725 [43.82] 1-103682-2
.250
[6.35]
.310
[7.87]
.320
[8.13]
.270
[6.86]
.320
[8.13]
B
No. of Dimensions Panel Mount
Pos. AB
Pin Shroud
14 1.935 [49.15] 1.825 [46.36] 1-103682-3
15 2.035 [51.69] 1.925 [48.90] 1-103682-4
16 2.135 [54.23] 2.025 [51.44] 1-103682-5
17 2.235 [56.77] 2.125 [53.98] 1-103682-6
18 2.335 [59.31] 2.225 [56.52] 1-103682-7
19 2.435 [61.85] 2.325 [59.06] 1-103682-8
20 2.535 [64.39] 2.425 [61.60] 1-103682-9
21 2.635 [66.93] 2.525 [64.14] 2-103682-0
22 2.735 [69.47] 2.625 [66.68] 2-103682-1
23 2.835 [72.01] 2.725 [69.22] 2-103682-2
24 2.935 [74.55] 2.825 [71.76] 2-103682-3
25 3.035 [77.09] 2.925 [74.30] 2-103682-4
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
243
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row (Continued)
MTE Panel Mount
Pin Shrouds
Material
Black thermoplastic, 94V-0 rated
Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products
Pin Assembly with
Guide Ribs (Refer to
pages 238 & 239)
Receptacle Assemblies with Guide
Ribs, Installed in
Single-Row Coupling Shroud
(Refer to pages 232, 233, 235 & 240)
Receptacle Assembly,
Polarized/Latching (Refer
to pages 230 & 231)
Panel Mount
Pin Shroud
Rear of Panel
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
244
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline
MTE Headers
.025 [0.64] Square
Straight Post (With or
Without Swaged Tail)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.060
[1.52]
.535
[13.59]
Position No. 1 Indicator
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Typ.
.200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
*±.003 [±0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
Recommended PC Board Hole Layout
.035±.003 Dia. Typ.
[0.89±0.08]
or
.040±.003 Dia. Typ.
[1.02±0.08]
(for Retention Tails)
A
B
C
X
X
.275
[6.98]
.100*
[2.54] Typ.
C
Swaged Retention Tail
(See Note)
Section X-X
245
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
MTE Headers
No. of Dimensions Polarized/Latching Header With Swage Polarized/Latching Header Without Swage
Pos. ABCPlating A Plating B Plating C Plating A Plating B Plating C
2.300 [7.62] .220 [5.59] .100 [2.54] 5-103908-1 5-104362-1 5-103669-1 5-103735-1 5-104363-1 5-103639-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-103908-2 5-104362-2 5-103669-2 5-103735-2 5-104363-2 5-103639-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-103908-3 5-104362-3 5-103669-3 5-103735-3 5-104363-3 5-103639-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-103908-4 5-104362-4 5-103669-4 5-103735-4 5-104363-4 5-103639-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-103908-5 5-104362-5 5-103669-5 5-103735-5 5-104363-5 5-103639-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-103908-6 5-104362-6 5-103669-6 5-103735-6 5-104363-6 5-103639-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-103908-7 5-104362-7 5-103669-7 5-103735-7 5-104363-7 5-103639-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-103908-8 5-104362-8 5-103669-8 5-103735-8 5-104363-8 5-103639-8
101.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103908-9 5-104362-9 5-103669-9 5-103735-9 5-104363-9 5-103639-9
111.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103908-0 6-104362-0 6-103669-0 6-103735-0 6-104363-0 6-103639-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103908-1 6-104362-1 6-103669-1 6-103735-1 6-104363-1 6-103639-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103908-2 6-104909-2 6-103669-2 6-103735-2 6-104910-2 6-103639-2
141.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103908-3 6-104909-3 6-103669-3 6-103735-3 6-104910-3 6-103639-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103908-4 6-104909-4 6-103669-4 6-103735-4 6-104910-4 6-103639-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103908-5 6-104909-5 6-103669-5 6-103735-5 6-104910-5 6-103639-5
171.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103908-6 6-104909-6 6-103669-6 6-103735-6 6-104910-6 6-103639-6
181.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103908-7 6-104909-7 6-103669-7 6-103735-7 6-104910-7 6-103639-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103908-8 6-104909-8 6-103669-8 6-103735-8 6-104910-8 6-103639-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103908-9 6-104909-9 6-103669-9 6-103735-9 6-104910-9 6-103639-9
212.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103908-0 7-104909-0 7-103669-0 7-103735-0 7-104910-0 7-103639-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103908-1 7-104909-1 7-103669-1 7-103735-1 7-104910-1 7-103639-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103908-2 7-104909-2 7-103669-2 7-103735-2 7-104910-2 7-103639-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103908-3 7-104909-3 7-103669-3 7-103735-3 7-104910-3 7-103639-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103908-4 7-104909-4 7-103669-4 7-103735-4 7-104910-4 7-103639-4
Notes: 1. Selectively loaded headers are available, consult TE.
2. Use Keying Tool No. 91417-1 to remove post for keying.
246
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
MTE Headers
.025 [0.64] Square
Right-Angle Post
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
Recommended PC Board Hole Layout
*±.003 [±0.08]; tolerance not to accumulate within one connector pattern.
Recommended PC Board Hole Layout
(PC board thickness (for Holddown Feature) is .062±.008 [1.57±0.20])
*±.003 [±0.08]; tolerance not to accumulate within one connector pattern.
.535
[13.59]
With Holddown
.060
[1.52]
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Typ. .200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
A
B
C
X
X
.275
[6.99]
.365
[9.27]
.145
[3.68]
.100*
[2.54] Typ.
.340±.003
[8.64±0.08] Typ. .055±.003
[1.40±0.08] Typ.
C
.035±.003
[0.89±0.08] Dia. Typ.
.134±.003
[3.40±0.08] Dia.
(2 Plc.)
.535
[13.59]
.060
[1.52]
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Typ.
.200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
A
B
C
X
X
.275
[6.99]
.145
[3.68]
.100*
[2.54] Typ.
C
.035±.003
[0.89±0.08] Dia. Typ.
Section X-X
Section X-X
Position No. 1 Indicator
Position No. 1 Indicator
Without Holddown
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
247
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
MTE Headers
No. of Dimensions Latching Header With Hold Down Latching Header Without Hold Down
Pos. ABCPlating A Plating B Plating C Plating A Plating B Plating C
2.300 [7.62] .220 [5.59] .100 [2.54] 5-103904-1 5-103673-1 5-103672-1 5-104935-5 5-103635-1 5-103634-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-103904-2 5-103673-2 5-103672-2 5-104935-3 5-103635-2 5-103634-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-103904-3 5-103673-3 5-103672-3 5-104935-1 5-103635-3 5-103634-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-103904-4 5-103673-4 5-103672-4 5-104935-6 5-103635-4 5-103634-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-103904-5 5-103673-5 5-103672-5 5-104935-7 5-103635-5 5-103634-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-103904-6 5-103673-6 5-103672-6 5-104935-8 5-103635-6 5-103634-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-103904-7 5-103673-7 5-103672-7 5-104935-2 5-103635-7 5-103634-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-103904-8 5-103673-8 5-103672-8 5-104935-9 5-103635-8 5-103634-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103904-9 5-103673-9 5-103672-9 6-104935-0 5-103635-9 5-103634-9
111.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103904-0 6-103673-0 6-103672-0 6-104935-1 6-103635-0 6-103634-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103904-1 6-103673-1 6-103672-1 5-104935-4 6-103635-1 6-103634-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103904-2 6-103673-2 6-103672-2 6-104935-2 6-103635-2 6-103634-2
141.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103904-3 6-103673-3 6-103672-3 6-104935-3 6-103635-3 6-103634-3
151.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103904-4 6-103673-4 6-103672-4 6-104935-4 6-103635-4 6-103634-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103904-5 6-103673-5 6-103672-5 6-104935-5 6-103635-5 6-103634-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103904-6 6-103673-6 6-103672-6 6-104935-6 6-103635-6 6-103634-6
181.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103904-7 6-103673-7 6-103672-7 6-104935-7 6-103635-7 6-103634-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103904-8 6-103673-8 6-103672-8 6-104935-8 6-103635-8 6-103634-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103904-9 6-103673-9 6-103672-9 6-104935-9 6-103635-9 6-103634-9
212.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103904-0 7-103673-0 7-103672-0 7-104935-0 7-103635-0 7-103634-0
222.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103904-1 7-103673-1 7-103672-1 7-104935-1 7-103635-1 7-103634-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103904-2 7-103673-2 7-103672-2 7-104935-2 7-103635-2 7-103634-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103904-3 7-103673-3 7-103672-3 7-104935-3 7-103635-3 7-103634-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103904-4 7-103673-4 7-103672-4 7-104935-4 7-103635-4 7-103634-4
Notes: 1. Selectively loaded headers are available, consult TE.
2. Use Keying Tool No. 91417-1 to remove post for keying.
248
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
MTE Headers
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated .000100
[0.00254] tin over .000050 [0.00127]
nickel on entire post
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.535
[13.59]
.120
[3.05]
.100*
[2.54]
X
X
A
.260
[6.60]
T
yp.
No. of Dimensions Latching
Pos. ABC Header
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104450-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104450-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104450-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104450-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104450-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104450-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104450-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104450-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104450-9
Section X-X
.060
[1.52]
(2 Plc.)
.200
[5.08]
B
C
.060
[1.52] .100
[2.54]
Typ.
.050
[1.27]
.100
[2.54]
.070
[1.78]
.050
[1.27]
Dia.
C
.065±.003
[1.65±0.08] Dia.
.135±.003
[3.43±0.08]
.075±.003
[1.91±0.08]
.040±.003 Dia. Typ.
[1.02±0.08]
(for Retention Tails)
.230
[5.84] .130
[3.30]
.350
[8.89]
Swaged Retention Tail
(See Note)
*±.003 [±0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
Recommended PC Board Hole Layout
Position No. 1 Indicator
249
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers, Through-hole, Surface Mount Compatible,
Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
MTE Headers
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.120
[3.05] .100
[2.54] .130
[3.30]
.060
[1.52]
.230
[5.84]
.060
[1.52]
.535
[13.59]
B
C
X
X
.262
[6.65]
.350
[8.89]
.200
[5.08] Ref.
T
yp.
No. of Dimensions Polarized/Latching
Pos. ABC
Header, High-Temp
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104809-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104809-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104809-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104809-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104809-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104809-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104809-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104809-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104809-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-104809-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104809-1
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Receptacle Assemblies (Polarized
Latching) — pages 230, 231
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Section X-X
A
(Contact Area)
.100
[2.54]
.200
[5.08]
.100*
[2.54] Typ.
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
.020±.002
[0.51±0.05]
Typ.
Header Profile (Shown for
orientation purposes only)
.040±.002
[1.02±0.05] T
yp.
.040±.003 Dia. Typ.
[1.02±0.08]
Plated-Thru Hole
Recommended PC Board Hole Layout
(Stencil Thickness = .010 [0.25])
*±.003 [±0.08] tolerance not to accumulate within one connector pattern
.135±.003
[3.43±0.08]
.065±.003
[1.65±0.08]
.075±.003
[1.90±0.08]
.180±.002
[4.57±0.05]
250
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers, Polarized/Latching, Through-Hole,
Surface Mount Compatible, Single-Row, .100 [2.54] Centerline
Note: All part numbers are RoHS compliant.
MTE Headers
Section X-X
B
X
.535
[13.59]
A
.262
[6.65]
.200
[5.08] Ref.
(Contact Area)
.060
[1.52]
(2 Plc.)
.120
[3.05]
.060
[1.52]
.100
[2.54]
.180
[4.57]
.350
[8.89] .145
[3.68]
.230
[5.84]
.100*
[2.54] Typ.
.058±.003
[1.47±0.08]
(2 Plc.)
.340±.003
[8.64±0.08] .090±.002
[2.29±0.05]
.035±.003 Dia. Typ.
[0.89±0.08]
Plated-Thru Hole
*±.003 [±0.08]; tolerance is not to accumulate within one connector pattern.
Recommended PC Board
(Stencil Thickness = .010 [0.25])
.025 [0.64] Square
Right-Angle Post (With
Holddown)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
X
C
.100
[2.54] Typ.
.093+.003
.093-.000
2.36+0.08
.093
-.000
.145
[3.68]
.200
[5.08]
.070±.002
[1.78±0.51] Typ.
Dia.
(2 Plc.)
][
C
No. of Dimensions Right-Angle
Header
Pos. ABC
with Hold Down
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104361-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104361-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104361-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104361-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104361-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104361-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104361-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104361-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104361-9
11 1.200 [30.48] 1.120 [28.44] 1.000 [25.40] 6-104361-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104361-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-104361-2
No. of Dimensions Right-Angle
Header
Pos. ABC
with Hold Down
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-104361-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-104361-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-104361-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-104361-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-104361-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-104361-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-104361-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-104361-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-104361-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-104361-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-104361-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-104361-4
Position No. 1 Indicator
251
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers
Note: All part numbers are RoHS
compliant.
No. of Dimensions Right-Angle Latching SMT Headers
Pos. ABCD EPlating A Plating B Plating C
2.400 [10.16] .220 [5.59] .100 [2.54] .140 [3.56] .290 [7.37] 5-147323-1 5-147278-1 5-147324-1
3.500 [12.70] .320 [8.13] .200 [5.08] .190 [4.83] .390 [9.91] 5-147323-2 5-147278-2 5-147324-2
4.600 [15.24] .420 [10.67] .300 [7.62] .240 [6.10] .490 [12.45] 5-147323-3 5-147278-3 5-147324-3
5.700 [17.78] .520 [13.21] .400 [10.16] .290 [7.37] .590 [14.99] 5-147323-4 5-147278-4 5-147324-4
6.800 [20.32] .620 [15.75] .500 [12.70] .340 [8.64] .690 [17.53] 5-147323-5 5-147278-5 5-147324-5
7.900 [22.86] .720 [18.29] .600 [15.24] .390 [9.91] .790 [20.07] 5-147323-6 5-147278-6 5-147324-6
81.000 [25.40] .820 [20.83] .700 [17.78] .440 [11.18] .890 [22.61] 5-147323-7 5-147278-7 5-147324-7
91.100 [27.94] .920 [23.37] .800 [20.32] .490 [12.45] .990 [25.15] 5-147323-8 5-147278-8 5-147324-8
10 1.200 [30.48] 1.020 [25.91] .900 [22.86] .540 [13.72] 1.090 [27.69] 5-147323-9 5-147278-9 5-147324-9
11 1.300 [33.02] 1.120 [28.45] 1.000 [25.40] .590 [14.99] 1.190 [30.23] 6-147323-0 6-147278-0 6-147324-0
12 1.400 [35.56] 1.220 [30.99] 1.100 [27.94] .640 [16.26] 1.290 [32.77] 6-147323-1 6-147278-1 6-147324-1
13 1.500 [38.10] 1.320 [33.53] 1.200 [30.48] .690 [17.53] 1.390 [35.31] 6-147323-2 6-147278-2 6-147324-2
14 1.600 [40.64] 1.420 [36.07] 1.300 [33.02] .740 [18.80] 1.490 [37.85] 6-147323-3 6-147278-3 6-147324-3
15 1.700 [43.18] 1.520 [38.61] 1.400 [35.56] .790 [20.07] 1.590 [40.39] 6-147323-4 6-147278-4 6-147324-4
16 1.800 [45.72] 1.620 [41.15] 1.500 [38.10] .840 [21.34] 1.690 [42.93] 6-147323-5 6-147278-5 6-147324-5
17 1.900 [48.26] 1.720 [43.69] 1.600 [40.64] .890 [22.61] 1.790 [45.47] 6-147323-6 6-147278-6 6-147324-6
18 2.000 [50.80] 1.820 [46.23] 1.700 [43.18] .940 [23.88] 1.890 [48.01] 6-147323-7 6-147278-7 6-147324-7
19 2.100 [53.34] 1.920 [48.77] 1.800 [45.72] .990 [25.15] 1.990 [50.55] 6-147323-8 6-147278-8 6-147324-8
20 2.200 [55.88] 2.020 [51.31] 1.900 [48.26] 1.040 [26.42] 2.090 [53.09] 6-147323-9 6-147278-9 6-147324-9
21 2.300 [58.42] 2.120 [53.85] 2.000 [50.80] 1.090 [27.69] 2.190 [55.63] 7-147323-0 7-147278-0 7-147324-0
22 2.400 [60.96] 2.220 [56.39] 2.100 [53.34] 1.140 [28.96] 2.290 [58.17] 7-147323-1 7-147278-1 7-147324-1
23 2.500 [63.50] 2.320 [58.93] 2.200 [55.88] 1.190 [30.23] 2.390 [60.71] 7-147323-2 7-147278-2 7-147324-2
24 2.600 [66.04] 2.420 [61.47] 2.300 [58.42] 1.240 [31.50] 2.490 [63.25] 7-147323-3 7-147278-3 7-147324-3
25 2.700 [68.58] 2.520 [64.01] 2.400 [60.96] 1.290 [32.77] 2.590 [65.79] 7-147323-4 7-147278-4 7-147324-4
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C — .000100 [.00254] tin over
.000050 [.00127] nickel on entire post
Recommended
PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperture Layout
Using .006 [0.152] or .008 [0.203]
Stencil Thickness)
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.535
[13.59]
.140
[3.56]
.165±.003
[4.19±0.07]
.133
[3.38]
.265
[6.73]
D
E
C
.070±.002 T
yp
[1.78±0.05]
.054/.039
[1.37/0.99]
Ø.085±.002
[2.16±0.05]
.136±.001
[3.45±0.02]
2 Plc
.190±.001
[4.83±0.02]
2 Plc
.065 Min Pad on
[1.65] Underside 2 Plc
.038 2 Plc
[0.97]
.120
[3.05]
A
B
C
K
K
.120
[3.05]
.350
[8.89]
.200
[5.08] Ref
Contact Area
.200
[5.08] .002
[0.05]
See L
View L
.076
[1.93]
.288
[7.32]
Ref
.262
[6.65]
.457
[11.61]
Ref
Position No. 1 Indicator
Ø.047 + .002
-.003
[1.19 + 0.05
- 0.07]
.140±.002
[3.56±0.05]
(Tangent
of heel)
(Plated thru hole)
.025
[0.64] Typ.
Section K-K
Recommended PC Board Layout
MTE Headers, Right-Angle, Polarized/Latching, Surface Mount
252
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MTE Headers, Vertical, Polarized/Latching, Surface Mount
MTE Headers
.075
[1.90]
.535
[13.59]
.063
[1.52]
E
.025 Typ.
[0.62]
.313
[7.62]
A
B
K
K
.025
[0.64] Typ.
.100
[2.54]
.200
[5.08]
.120
[3.05]
.230
[5.84]
Pick and Place Cap
Position No. 1 Indicator
Position No. 1
.100
[2.54] Typ.
.055±.003
[1.40±0.08]
Ø .052 + .002
–.003
[1.32 + 0.05
– 0.07]
.070±.002
[1.78±0.05]
.088±.003
[2.25±0.08]
D
C0.06
[1.53]
.113
[2.88]
.227
[5.76]
No. of Dimensions Vertical SMT Headers
Pos. ABCD EPlating A Plating B Plating C
2.300[7.62] .220[5.59] .100[2.54] .220[5.60] .110[2.80] 5-1375583-1 5-1375582-1 5-1375549-1
3.400[10.16] .320[8.13] .200[5.08] .320[8.14] .160[4.07] 5-1375583-2 5-1375582-2 5-1375549-2
4.500[12.70] .420[10.67] .300[7.62] .420[10.68] .210[5.34] 5-1375583-3 5-1375582-3 5-1375549-3
5.600[15.24] .520[13.21] .400[10.16] .520[13.22] .260[6.61] 5-1375583-4 5-1375582-4 5-1375549-4
6.700[17.78] .620[15.75] .500[12.70] .620[15.76] .310[7.88] 5-1375583-5 5-1375582-5 5-1375549-5
7.800[20.32] .720[18.29] .600[15.24] .720[18.30] .360[9.15] 5-1375583-6 5-1375582-6 5-1375549-6
8.900[22.86] .820[20.83] .700[17.78] .820[20.84] .410[10.42] 5-1375583-7 5-1375582-7 5-1375549-7
91.000[25.40] .920[23.37] .800[20.32] .920[23.38] .460[11.69] 5-1375583-8 5-1375582-8 5-1375549-8
10 1.100[27.94] 1.020[25.91] .900[22.86] 1.020[25.92] .510[12.96] 5-1375583-9 5-1375582-9 5-1375549-9
11 1.200[30.48] 1.120[28.45] 1.000[25.40] 1.120[28.46] .560[14.23] 6-1375583-0 6-1375582-0 6-1375549-0
12 1.300[33.02] 1.220[30.99] 1.100[27.94] 1.220[31.00] .610[15.50] 6-1375583-1 6-1375582-1 6-1375549-1
13 1.400[35.56] 1.320[33.53] 1.200[30.48] 1.320[33.54] .660[16.77] 6-1375583-2 6-1375582-2 6-1375549-2
14 1.500[38.10] 1.420[36.07] 1.300[33.02] 1.420[36.08] .710[18.04] 6-1375583-3 6-1375582-3 6-1375549-3
15 1.600[40.64] 1.520[38.61] 1.400[35.56] 1.520[38.62] .760[19.31] 6-1375583-4 6-1375582-4 6-1375549-4
16 1.700[43.18] 1.620[41.15] 1.500[38.10] 1.620[41.16] .810[20.58] 6-1375583-5 6-1375582-5 6-1375549-5
17 1.800[45.72] 1.720[43.69] 1.600[40.64] 1.720[43.70] .860[21.85] 6-1375583-6 6-1375582-6 6-1375549-6
18 1.900[48.26] 1.820[46.23] 1.700[43.18] 1.820[46.24] .910[23.12] 6-1375583-7 6-1375582-7 6-1375549-7
19 2.000[50.80] 1.920[48.77] 1.800[45.72] 1.920[48.78] .960[24.39] 6-1375583-8 6-1375582-8 6-1375549-8
20 2.100[53.34] 2.020[51.31] 1.900[48.26] 2.020[51.32] 1.010[25.66] 6-1375583-9 6-1375582-9 6-1375549-9
21 2.200[55.88] 2.120[53.85] 2.000[50.80] 2.120[53.86] 1.060[26.93] 7-1375583-0 7-1375582-0 7-1375549-0
22 2.300[58.42] 2.220[56.39] 2.100[53.34] 2.220[56.40] 1.110[28.20] 7-1375583-1 7-1375582-1 7-1375549-1
23 2.400[60.96] 2.320[58.93] 2.200[55.88] 2.320[58.94] 1.160[29.47] 7-1375583-2 7-1375582-2 7-1375549-2
24 2.500[63.50] 2.420[61.47] 2.300[58.42] 2.420[61.48] 1.210[30.74] 7-1375583-3 7-1375582-3 7-1375549-3
25 2.600[66.04] 2.520[64.01] 2.400[60.96] 2.520[64.02] 1.260[32.01] 7-1375583-4 7-1375582-4 7-1375549-4
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C — .000100 [.00254] tin
over .000050 [.00127] nickel on entire
post
Recommended
PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperature Layout
using .006 [0.152] or .008 [0.203]
stencil thickness
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Ø
Plated Thru-Hole
Section K-K
Note: All part numbers are RoHS
compliant.
Recommended PC Board Layout
253
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Interchangeable Contacts, Wire Crimp (Snap-In)
MTE Headers
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
.068
[1.73]
CC
.060
[1.52]
.460
[11.68]
Section C - C
.012
[0.30]
Gap
Heavy Duty Miniature
Wire Size Applicator for
Applicator for
Range Ins.
Finish
Contact Part No. AMP-O-MATIC Hand
AWG [mm2]
Dia. (Standard Pressure) AMP-O-LECTRIC Stripper/Crimper Tool
Range Strip Form Loose Piece Machine* Machine Nos.
.025-.060 Plating A 1-104481-1 1-104481-3
32-28 0.03-0.08 0.64-1.52 Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1
Plating C 5-104481-2 5-104481-6
.025-.060 Plating A 1-104480-3 1-104480-6
26-22 0.13-0.3 0.64-1.52 Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1
Plating C 1-104480-7 1-104480-4
.025-.060 Plating A 1-104479-0 1-104479-3
24-20 0.2-0.5 0.64-1.52 Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1
Plating C 104479-8 1-104479-1
*For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Keying Plug
Part No. 104072-1
T
en plugs are supplied per strip.
Order quantity reflects the number
of strips required.
Extraction/Lance Reset
Tool No. 843477-1
Short Point Receptacles
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling—
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-1472, 108-1472-1
Application Specification
114-25038
Note: All part numbers are RoHS compliant.
254
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Interchangeable Contacts, Wire Crimp (Snap-In) (Continued)
Note: All part numbers are RoHS compliant.
MTE Contacts
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000030
[0.00076] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000030
[0.00076] min. tin on solder area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Extraction/Lance Reset
Tool No. 843477-1
Contact Heavy Duty Applicator for
Wire Size Ins. Dia. Part No. Miniature Applicator AMP-O-MATIC Hand
Range Range Finish (Standard Pressure) for AMP-O-LECTRIC Stripper/ Tool
AWG [mm2] Strip Loose Machine* Crimper Nos.
Form Piece Machine
.025-.054 Plating A 5-104506-6 5-104506-7
32-28 0.03-0.08 0.64-1.37 Plating B 5-104506-4 5-104506-5 ——58342-2
Plating C 5-104506-2 5-104506-3
.036-.054 Plating A 5-104505-6 5-104505-7
26-22 0.14-0.32 0.91-1.37 Plating B 5-104505-4 5-104505-5 567239-2 466983-1 91531-1
Plating C 5-104505-2 5-104505-3
*For use with AMP-O-LECTRIC Model “K” machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
.025
[0.64]
.810
[20.57]
.025
[0.64]
Pins
Related Product Data
Performance Characteristics —
page 221
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
255
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MT and Shielded MT Interconnection System
Note: All part numbers are RoHS compliant.
MT and Shielded MT
Interconnection System
Wire-to-Board
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
5-102398-8 D-R Assembly
102537-8 Ejection Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102681-5 Latching Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102540-8 Polarizing Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102541-8 Non-Polarizing Cover
102536-8 Back Cover
102185-2 Latch
5102154-4 Header
5-103168-8 Hdr
5-103166-8 Header
5-103166-8 Header
Performance
Characteristics
Contact Current Rating —
3 amperes for single contact in free air.
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Operating Temperature —
-65°C to +105°C
Termination Resistance —
12 milliohms max.
Max. Mating Force —
High pressure - 26 oz. [7.23 N]
Standard pressure - 9 oz. [2.50 N]
Min. Unmating Force —
High pressure — 5 oz. [1.39 N]
Standard pressure — 1.5 oz. [0.417 N]
Contact Retention in Housing —
5 lb. [22.24 N] per contact min.
Product Facts
■Full line of mass
termination tooling offers
lowest installed cost for
most production needs
■Dual cantilever beams with
anti-overstress features
provide redundant contact
of mating post and limit
beam deflection, preventing
permanent deformation
■Redundant insulation
displacement slots provide
for maximum reliability
■Integral wire strain relief
on contact can prevent wire
motion from being
transmitted to wire
termination areas
■Built-in contact post stop
can protect terminated wire
from being disturbed by
over-insertion of mating
post, prevents wire from
entering contact area and
positively limits mating
connector depth
■Insulation displacement
contacts and crimp,
snap-in contacts are
interchangeable
■Complete serviceability
with replacement contacts
■Cover styles include
low profile (polarized,
non-polarized, latching and
ejection) and standard
profile (hermaphroditic
and ejection)
■Connector housings may
be stacked end-to-end
within one pair of covers.
All varieties of covers in
this catalog are suitable for
multiple housing stacking
applications similar to the
example illustrated in the
photograph to the right
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
The AMPMODU MT and
Shielded MT Interconnection
System offers labor and
cost savings through mass
termination technology,
while maintaining the time-
proven reliability of the
AMPMODU product family.
The MT system is comprised
of preloaded, double-row
receptacle assemblies with
snap-on covers and a variety
of shielding hardware and
accessories. The system is
supported by a full line of
mass termination tooling to
meet virtually most produc-
tion needs.
The insulation displacement
contact, the heart of the MT
system, features a mating
interface that is the same as
the conventional AMPMODU
crimp, snap-in contact, fea-
turing dual cantilever beams,
built-in overstress protection
and a completely enclosed
“box” design.
To reduce EMI/ESD (electro-
magnetic interference/
electrostatic discharge) at
the input-output interface,
add-on metal shields can be
used to convert standard
MT connectors to shielded
MT connectors.
Typical Application of End-to-End Stacking
R
R
256
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MT Receptacle Assemblies, Double-Row
.100 x .100 [2.54 x 2.54] Centerline
Note: All part numbers are RoHS compliant.
MT Receptacle Assemblies
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy, duplex
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tail, with entire contact underplated
.000050 [0.00127] nickel
Related Product Data
Mateable Connectors — pages 117,
122, 126, 130, 264
Cable Insulation Wall
Thickness — .015 [0.39] max.
Cable Insulation Diameter —
.050 [1.27] max.
Mating Post Length —
.222-.273 [5.64-6.94] max.
Performance Characteristics —
page 255
Replacement Contacts — page 265
Connector Covers —
pages 258, 259
Application Tooling —
pages 273-275
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Housings Pre-loaded with
Standard Pressure Contacts
A Max.
1
B
.100
[2.54]
.600
[15.24]
.125
[3.18]
.100
[2.54] Typ.
.270
[6.86]
Part Nos. (Stamped)
No. of Dimensions Wire Size Range Unloaded
Pos. AB
30-26 AWG 26-22 AWG 22-20 AWG Housings
[0.05-0.15 mm2] [0.12-0.3 mm2] [0.3-0.6 mm2]
6.300 [7.62] .200 [5.08] 5-102393-1 5-102398-1 5-102448-1 102394-1
8.400 [10.16] .300 [7.62] 5-102393-2 5-102398-2 5-102448-2 102394-2
10 .500 [12.70] .400 [10.16] 5-102393-3 5-102398-3 5-102448-3 102394-3
12 .600 [15.24] .500 [12.70] 5-102393-4 5-102398-4 5-102448-4 102394-4
14 .700 [17.78] .600 [15.24] 5-102393-5 5-102398-5 5-102448-5 102394-5
16 .800 [20.32] .700 [17.78] 5-102393-6 5-102398-6 5-102448-6 102394-6
18 .900 [22.86] .800 [20.32] 5-102393-7 5-102398-7 5-102448-7 102394-7
20 1.000 [25.40] .900 [22.86] 5-102393-8 5-102398-8 5-102448-8 102394-8
22 1.100 [27.94] 1.000 [25.40] 5-102393-9 5-102398-9 5-102448-9 102394-9
24 1.200 [30.48] 1.100 [27.94] 6-102393-0 6-102398-0 6-102448-0 1-102394-0
26 1.300 [33.02] 1.200 [30.48] 6-102393-1 6-102398-1 6-102448-1 1-102394-1
28 1.400 [35.56] 1.300 [33.02] 6-102393-2 6-102398-2 6-102448-2 1-102394-2
30 1.500 [38.10] 1.400 [35.56] 6-102393-3 6-102398-3 6-102448-3 1-102394-3
32 1.600 [40.64] 1.500 [38.10] 6-102393-4 6-102398-4 6-102448-4 1-102394-4
34 1.700 [43.18] 1.600 [40.64] 6-102393-5 6-102398-5 6-102448-5 1-102394-5
40 2.000 [50.80] 1.900 [48.26] 6-102393-8 6-102398-8 6-102448-8 1-102394-8
50 2.500 [63.50] 2.400 [60.96] 7-102393-3 7-102398-3 7-102448-3 2-102394-3
60 3.000 [76.20] 2.900 [73.66] 7-102393-8 7-102398-8 7-102448-8 2-102394-8
64 3.200 [81.28] 3.100 [78.74] 8-102393-0 8-102398-0 8-102448-0 3-102394-0
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
11111
1
Circuit No. 1
Identifier
Contact
I.D. No.
.050
[1.27]
.070
[1.78]
.240
[6.10]
Right-Angle
Header
MT Receptacle
Assembly
PC
Board .270
[6.86]
.300
[7.62]
257
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
MT Receptacle Assemblies, Double-Row
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Note: All part numbers are RoHS compliant.
MT Receptacle Assemblies
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy, duplex
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tails, with entire contact underplated
.000050 [0.00127] nickel
Related Product Data
Mateable Connectors — pages 117,
122, 126, 130, 264
Cable Insulation Wall
Thickness — .015 [0.39] max.
Cable Insulation Diameter —
.050 [1.27] max.
Mating Post Length —
.200-.273 [5.64-6.94] max.
Performance Characteristics —
page 255
Replacement Contacts — page 265
Connector Covers —
pages 258, 259
Application Tooling —
pages 273-275
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Housings Pre-loaded with
High Pressure Contacts
A Max.
4
B
.100
[2.54]
.600
[15.24]
.125
[3.18]
.100
[2.54] T
yp.
.270
[6.86]
Part Nos. (Stamped*)
No. of Dimensions Wire Size Range
Pos. AB
30-26 AWG 26-22 AWG 22-20 AWG
[0.05-0.15 mm2] [0.12-0.3 mm2] [0.3-0.6 mm2]
6.300 [7.62] .200 [5.08] 5-102693-1 5-102694-1 5-102695-1
8.400 [10.16] .300 [7.62] 5-102693-2 5-102694-2 5-102695-2
10 .500 [12.70] .400 [10.16] 5-102693-3 5-102694-3 5-102695-3
12 .600 [15.24] .500 [12.70] 5-102693-4 5-102694-4 5-102695-4
14 .700 [17.78] .600 [15.24] 5-102693-5 5-102694-5 5-102695-5
16 .800 [20.32] .700 [17.78] 5-102693-6 5-102694-6 5-102695-6
18 .900 [22.86] .800 [20.32] 5-102693-7 5-102694-7 5-102695-7
20 1.000 [25.40] .900 [22.86] 5-102693-8 5-102694-8 5-102695-8
*Cavity identification — first cavity (one side); TE Part No. and date code stamped on housing where size permits.
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
1
Circuit No. 1
Identifier
Contact
I.D. No.
.050
[1.27] .240
[6.10]
Right-Angle
Header
MT Receptacle
Assembly
PC
Board .270
[6.86]
.300
[7.62]
444 44444 4
258
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Low Profile Covers for Double-Row MT Receptacle Assemblies
Note: All part numbers are RoHS compliant.
MT Low Profile Covers
L
L
.750
[19.05]
Material
Black thermoplastic, flame retardant
Related Product Data
For use on Double-Row MT Receptacle
Assemblies — pages 256, 257
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Note: See page 259 for Low Profile
Cover Part Nos.
Front Covers
.095
[2.41] Typ.
.468
[11.89]
.150
[3.81]
.750
[19.05]
.750
[19.05]
.750
[19.05]
Assembled*
L L
.480
[12.19]
A - Polarizing Cover
(Mates with AMPMODU 4-sided shrouded
headers. Refer to pages 117, 122, 126, 130.)
B - Latching Cover
(Mates with AMPMODU 4-sided shrouded
headers with extraction slot. Refer to
pages 117, 122, 126, 130.)
C - Ejection Cover
(Mates with AMP-LATCH universal ejection
style pin headers equipped with latching
ears, Part No. 102185-2 (with push tabs)
or Part No. 102312-2 (without push tabs),
see TE Catalog 82012.
D - Non-Polarizing Cover
(Designed for use with shielded connectors,
pages 261 & 262; or for non-polarizing
applications.)
*Dimension applies to cover when
installed on connector housing.
Back Covers
E - For Shielding and
Non-Shielding Applications
(For use with any low profile cover.)
F - For Shielding Applications
(For use with Non-Polarizing Cover only.)
259
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Standard Profile Covers for Double-Row MT Receptacle Assemblies
Note: All part numbers are RoHS compliant.
MT Standard Profile Covers
.850
[21.59]
Material
Black thermoplastic, flame retardant
Related Product Data
For use on Double-Row MT Receptacle
Assemblies — pages 256, 257
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
.095
[2.41]
T
yp.
.150
[3.81]
1.120
[28.45]
.468
[11.89]
Assembled*
T
op View
Bottom View
1.120
[28.45]
L
G - Hermaphroditic Cover
(Two hermaphroditic covers can be used or
one hermaphroditic cover can be used with
an H Ejection Cover.)
H - Ejection Cover
(Mates with AMP-LATCH universal ejection style
pin headers equipped with latching ears, Part No.
102185-2 (with push tabs) or Part No. 102312-2
(without push tabs), see TE Catalog 82012.
*Dimension applies to cover when
installed on connector housing.
Low Profile Covers Standard Profile Covers
Front Covers Back Covers
No. of Dimension EGH
Pos. L ABCDShielding and FHermaphroditic Ejection
Polarizing Latching Ejection Non-Polarizing Non-Shielding Shielding
Applications Applications
6.300 [7.62] 102540-1 — 102537-1 102541-1 102536-1 — 102396-1 —
8.400 [10.16] 102540-2 — 102537-2 102541-2 102536-2 — 102396-2 —
10 .500 [12.70] 102540-3 — 102537-3 102541-3 102536-3 — 102396-3 —
12 .600 [15.24] 102540-4 102681-1 102537-4 102541-4 102536-4 102823-5 102396-4 —
14 .700 [17.78] 102540-5 102681-2 102537-5 102541-5 102536-5 102823-6 102396-5 —
16 .800 [20.32] 102540-6 102681-3 102537-6 102541-6 102536-6 102823-7 102396-6 —
18 .900 [22.86] 102540-7 102681-4 102537-7 102541-7 102536-7 102823-1 102396-7 —
20 1.000 [25.40] 102540-8 102681-5 102537-8 102541-8 102536-8 102823-4 102396-8 103268-6
22 1.100 [27.94] 102540-9 102681-6 102537-9 102541-9 102536-9 102823-8 102396-9 —
24 1.200 [30.48] 1-102540-0 102681-7 1-102537-0 1-102541-0 1-102536-0 102823-9 1-102396-0 103268-7
26 1.300 [33.02] 1-102540-1 102681-8 1-102537-1 1-102541-1 1-102536-1 1-102823-0 1-102396-1 103268-8
28 1.400 [35.56] 1-102540-2 102681-9 1-102537-2 1-102541-2 1-102536-2 1-102823-1 1-102396-2 —
30 1.500 [38.10] 1-102540-3 1-102681-0 1-102537-3 1-102541-3 1-102536-3 1-102823-2 1-102396-3 103268-9
32 1.600 [40.64] — 1-102681-1 1-102537-4 1-102541-4 1-102536-4 1-102823-3 1-102396-4 —
34 1.700 [43.18] — 1-102681-2 1-102537-5 1-102541-5 1-102536-5 1-102823-4 1-102396-5 1-103268-0
40 2.000 [50.80] — 1-102681-5 1-102537-8 1-102541-8 1-102536-8 102823-2 1-102396-8 —
50 2.500 [63.50] — 2-102681-0 2-102537-3 2-102541-3 2-102536-3 102823-3 2-102396-3 1-103268-3
60 3.000 [76.20] ——2-102537-8 2-102541-8 2-102536-8 — 2-102396-8 —
64 3.200 [81.28] ——3-102537-0 3-102541-0 3-102536-0 — 3-102396-0 —
260
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Shielding Hardware and Accessories for MT Interconnection System
MT Shielding
Hardware and Accessories
Product Facts
■Add-on shielding
accessories for existing
AMPMODU Standard MT
and PC board mounted
headers
■Compact design
■Tin plated copper alloy
material
■Redundant cantilever
beams provide for good
peripheral contact,
eliminating the need for
a separate RF gasket
■Polarized mating
■360° cable braid
termination with cable
jacket support
■Cable shielding hardware
permits molded cable
terminations after assembly
■Must be used with braided
shielded cables
■Solder tabs on right-angle
header shields are
self-retaining in a PC board
Shielded MT Receptacles
Shielded Right-Angle Headers
The shielded AMPMODU
MT system features add-on
metal shielding kits for
double-row standard MT
receptacle assemblies and
double-row right-angle
headers.
Cable shielding hardware
consists of a ferrule and two
stamped and formed shell
halves. The inner shell half
has a series of integral
cantilever beams to provide
good peripheral contact
with the mating outer shell
half. This feature also
eliminates the need for a
separate RF gasket.
Detents in the cantilever
beam provide a positive
lock when the two halves
are mated. During assembly
the inner and outer shell
halves are snapped
together over a terminated
standard MT connector.
Shields for right-angle
headers have integral
cantilever beams which
provide good contact with
the mating shielded MT
receptacle assembly,
without the use of a
separate RF gasket.
261
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies
Note: All part numbers are RoHS compliant.
MT Shielding
Hardware and Accessories
Dimensions Part Nos.
No. of
AB C Outer Inner
Pos. Shell Shell
6.410 [10.41] .817 [20.75] 1.268 [32.21] 102988-2 102987-6
10 .610 [15.49] .817 [20.75] 1.667 [42.34] 103137-2 103136-2
16 .910 [23.11] .950 [24.13] 1.925 [48.90] 103153-2 103152-2
26 1.410 [35.81] .950 [24.13] 1.925 [48.90] 103341-2 103340-2
40 2.110 [53.59] 1.325 [33.66] 2.468 [62.69] 104272-1 104271-1
50 2.610 [66.29] .950 [24.13] 2.468 [62.69] 103158-2 103157-2
Note: Match shield size to number of connector positions.
Outer Shell Half
Flare braid over
assembled shells for
crimping under ferrule
Ferrule Purchased
separately
(See page 263)
Standard MT
Receptacle Assembly
Purchased separately
(Refer to pages 256 & 257)
Two-Piece Shields—
Straight Exit
Material and Finish
Shell Halves — Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.
Related Product Data
Double-Row MT Receptacle
Assemblies — pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) —
pages 258, 259
Shield Ferrules — page 263
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
A
B
C
.326
[8.28]
Inner Shell Half
262
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies (Continued)
Note: All part numbers are RoHS compliant.
MT Shielding
Hardware and Accessories
Outer Shell Half
Flare braid over
assembled shells for
crimping under ferrule
Ferrule Purchased
separately
(See page 263)
Standard MT
Receptacle Assembly
Purchased separately
(Refer to pages 256 & 257)
Two-Piece Shields—
Right-Angle Exit
Material and Finish
Shell Halves — Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.
Related Product Data
Double-Row MT Receptacle
Assemblies — pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) —
pages 258, 259
Shield Ferrules — page 263
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
A
B
C
.326
[8.28]
Inner Shell Half
No. of Dimensions Part Nos.
Pos. AB COuter Shell Inner Shell
18 1.010 [25.65] 1.120 [28.45] 1.413 [35.89] 102784-2 102783-2
26 1.410 [35.81] 1.166 [29.62] 1.975 [50.17] 103139-2 103138-2
40 2.110 [53.59] 1.135 [28.83] 2.633 [66.88] 102786-2 102785-2
50 2.610 [66.29] .983 [24.97] 3.133 [79.58] 102788-2 102787-2
60 3.110 [78.99] 1.118 [28.40] 3.606 [91.59] 103141-2 103140-2
Notes: 1. Match shield size to number of connector positions.
2. Hole is provided in 26 through 60-position cable shields for application of optional cable tie pull ring after
assembly.
.125
[3.18] Dia.
(See Note 2)
263
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
MT Shielding
Hardware and Accessories
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies (Continued)
Ferrules for Shielding Kits
Material and Finish
Soft copper, tin plated
Related Product Data
Used with Shielding Kits —
pages 261, 262
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
AMP-O-LECTRIC Model
“G” Terminating Machine
TE Hand Tool 91410-1
(Die Set required, see table below)
Application Tooling
No. of Straight-Exit Shields
Right-Angle Exit Shields
Cable Dia. Ferrule Applicator Die* Hand Tool Die Sets
Pos. Outer Inner Outer Inner Range Part Number Assembly Part No. Insulation Braid
6 102988-2 102987-6 ——0.200-0.250 [5.08-6.35] 102985-4 812665-2 1-527116-8 527116-4
0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3
10 103137-2 103136-2 ——0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3
0.370-0.420 [9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3
0.190-0.240 [4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3
16 103153-2 103152-2 ——
0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3
0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3
0.370-0.420 [9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3
0.190-0.240 [4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3
18 ——102784-2 102783-2 0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3
0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3
0.370-0.420 [9.40-10.67] 5-102903-1 812665-3 1-527116-4 527116-3
0.320-0.370 [8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2
26 103341-2 103340-2 103139-2 103138-2 0.430-0.460 [10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2
0.320-0.370 [8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2
40 104272-1 104271-1 102786-2 102785-2 0.430-0.460 [10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2
0.380-0.420 [9.65-10.67] 5-102903-6 1-812665-5 1-527116-2 527116-1
50 103158-2 103157-2 102788-2 102787-2 0.430-0.460 [10.92-11.68] 5-102903-5 1-812665-4 1-527116-1 527116-1
0.470-0.520 [11.94-13.21] 5-102789-3 1-812665-3 1-527116-0 527116-1
0.470-0.520 [11.94-13.21] 5-102903-8 1-812665-8 ——
60 ——103141-2 103140-2 0.500-0.545 [12.70-13.84] 5-102903-7 1-812665-7 ——
0.550-0.600 [13.97-15.24] 5-102789-4 1-812665-6 ——
*For use with Model “K” machines. Call the TE Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (also shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Ferrules are used with shielding kits shown on pages 261 & 262, and are purchased separately.
2. Individual anvils and crimpers also may be purchased separately.
3. Ferrule Part Number 1-102903-8 also requires Spacer Part Number 527116-9.
264
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Shielded MT Headers for use with Shielded MT Receptacle Assemblies
Note: All part numbers are RoHS compliant.
MT Shielded Headers
AMPMODU Right-Angle
Headers PC Board Mounted
Material and Finish
Housing — Black thermoplastic,
flame retardant
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Shield — Copper alloy, .020 [0.51]
thick; pretinned .000030 [0.00076] min.
Related Product Data
Mating Connectors — Double-Row
MT Receptacle Assemblies with
Shielding Hardware — pages 256-263
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032.
Instruction Sheet
408-6532
.460
[11.68]
.550
[13.97]
.125
[3.18]
.025
[0.64] Sq. Posts
B
A
.755
[19.18]
.290
[7.37]
C
Shield
.030
[0.76]
.318
[8.08]
.135
[3.43]
.434
[11.02]
Right-Angle
Header
A
A
.725
[18.45]
.145±.003
[3.68±0.08]
2 Plc.
.145±.003
[3.68±0.08]
2 Plc.
.100±.003
[2.54±0.08]
.550±.003
[13.97±0.08]
.040±.003
[1.02±0.08] Dia.
(All holes)
D ±.003
[±0.08]
2D ±.003
[±0.08]
D±.003
[±0.08]
2D ±.003
[±0.08]
.100±.003
[2.54±0.08]
.050±.003
[1.27±0.08]
Recommended PC Board Hole Layout
for 6, 8 and 10 Positions
Recommended PC Board Hole Layout
for 16 thru 50 Positions
D - Contact centerline is .100 [2.54]; ±.003 [0.08] tolerances
not to accumulate within one connector pattern.
No. of Dimensions Header Shield
Pos. ABC
Part Nos. Part Nos.
6.200 [5.08] .430 [10.92] .510 [12.95] 102792-6 102991-1
8.300 [7.62] .530 [13.46] .610 [15.49] 102792-8 102991-2
10 .400 [10.16] .630 [16.00] .710 [18.03] 102792-1 102791-2
16 .700 [17.78] .930 [23.62] 1.010 [25.65] 102792-7 102791-3
18 .800 [20.32] 1.030 [26.16] 1.110 [28.19] 102792-2 102791-4
20 .900 [22.86] 1.130 [28.70] 1.210 [30.73] 102792-5 1-102791-0
26 1.200 [30.48] 1.430 [36.32] 1.510 [38.35] 102792-9 102791-1
50 2.400 [60.96] 2.630 [66.80] 2.710 [68.83] 102792-4 102791-8
265
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Replacement MT Receptacle Contacts
Note: All part numbers are RoHS compliant.
MT Contacts
Wire Size Range Standard Pressure High Pressure
Receptacle Receptacle
AWG [mm2]Contact Ident. Part No. Contact Ident. Part No.
30-26 0.05-0.15 1 5-102395-2 4 5-102641-6
26-22 0.12-0.3 2 5-102399-1 5 5-102642-6
22-20 0.3-0.6 3 5-102449-6 ——
Note: Termination tooling for MT receptacle insulation displacement contacts is shown on pages 273-275.
Insulation Displacement
Contacts
Material and Finish
Copper alloy, duplex plated .000030
[0.00076] gold in mating area, .000100-
.000200 [0.00254-0.00508] tin in crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 255
Application Tooling —
pages 273-275
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
.050
[1.27] Max.
Insulation
Diameter
Contact
Identification
MT receptacle contacts
incorporate the following
features.
Cantilever
Beams
Wide
Misalignment
Tolerance
Anti-
overstress
The MT receptacle contact
cross-section is primarily
rectangular, with rounded
corners. Two integral
cantilever beams contact
the mating square male
posts. Deflection of these
spring members is limited
by anti-overstress and
excessive permanent
deformation is prevented.
This feature allows a wide
range for tolerance of
misalignment of mating
contacts.
Extraction/Lance Reset Tool
No. 843477-3
The configuration of the
receptacle completely
encloses the spring
members helping to prevent
damage during handling
and assembly, and makes
the system compatible with
automatic application
techniques.
266
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mini-Tandem Spring Receptacle Housings and Contacts
Mini Tandem Spring
Housings and Contacts
Specifications
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — gold plated
contacts
18 milliohms (max.) — tin plated
contacts
Durability — Ref. Product
Specification 108-25031
Product Facts
■Individual contacts mate
with .025 [0.64] sq. posts,
.125 [3.18] long
■Crimp snap-in contacts
accept 32-22 AWG
[0.03-0.32 mm2] wire
■Retention latch provides for
positive installation
■No insertion tool required
■High durability design
provides long life
■Available with .000015
[0.00038] or .000030
[0.00076] thick gold inlay
in contact areas, or bright
tin plated
■Closed-entry housings
■Mini-contact box size:
.060 [1.52] sq.
■Mini-Tandem Spring
Housings can be stacked
on .100 [2.54] centers in
either direction
■Mini-Tandem
Spring Housings are
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Mini-Tandem Spring
Receptacle Contacts are
designed to mate with .025
[0.64] posts. When used
individually, they will mate
with posts as short as .125
[3.18] and when used in a
housing, they will mate with
.140 [3.55] long posts.
These versatile contacts
may be used for
interconnecting posted
pc panels, I/O wiring and
cross-connecting pin
arrays.
The receptacle contact's
box configuration provides
for long contact life with
controlled contact mating
forces which minimize wear.
An external retention spring
facilitates quick assembly
and provides firm seating in
a contact housing.
Mini-Tandem Spring
Receptacle Contacts are
used in single- or double-
row housings with .100
[2.54] centerline spacing.
Single-row housings can be
converted into double-row
connectors on .100 x .200
[2.54 x 5.08] centers with
the use of stacking clips.
Mini-Tandem Spring
Housings can be stacked
side-by-side or end-to-end
on .100 [2.54] centers.
R
R
267
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mini-Tandem Spring Housings, Single-Row
Note: All part numbers are RoHS compliant.
Spring Housings
.100 [2.54] Centerline
Material — Black glass-filled poly-
ester, 94V-0 rated
A Max.
.550
[13.97]
No. of Dimensions Housing
Pos. ABC
Part No.
2.200 [5.08] 1 .100 [2.54] 530554-1
4.400 [10.16] 3 .300 [7.62] 530554-3
8.800 [20.32] 7 .700 [17.78] 530554-7
12 1.200 [30.48] 11 1.100 [27.94] 1-530554-1
16 1.600 [40.64] 15 1.500 [38.10] 1-530554-5
18 1.800 [45.72] 17 1.700 [43.18] 1-530554-7
20 2.000 [50.80] 19 1.900 [48.26] 1-530554-9
22 2.200 [55.88] 21 2.100 [53.34] 2-530554-1
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
.030
[0.76]
.050
[1.27] .100
[2.54] Max.
.100
[2.54] B Spaces
@ .100 [2.54] = C
Material—Natural color nylon,
94V-2 rated
Keying Plug
Part No. 531226-1
(Plugs directly into housing)
.036
[0.91]
.066
[1.68]
.050
[1.27]
Minimum mating post length is .140 [3.55].
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
268
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mini-Tandem Spring Housings, Double-Row
Note: All part numbers are RoHS compliant.
Mini-Tandem
Spring Contacts
.100 [2.54] Centerline
Material — Black glass-filled
polyester, 94V-0 rated*
A Max.
.550
[13.97]
No. of Dimensions Housing
Pos. ABC
Part No.
6.300 [7.62] 2 .200 [5.08] 530902-1
8.400 [10.16] 3 .300 [7.62] 530902-6
12 .600 [15.24] 5 .500 [12.70] 2-530902-0
16 .800 [20.32] 7 .700 [17.78] 3-530902-0
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
.030
[0.76]
.200
[5.08]
.100
[2.54] B Spaces
@ .100 [2.54] = C
Material — Natural color nylon,
94V-2 rated
Keying Plug
Part No. 531226-1
(Plugs directly into housing)
*Consult TE for specific
UL recognition.
.036
[0.91]
.066
[1.68]
.050
[1.27]
Minimum mating post length is .140 [3.55].
.100
[2.54] Max.
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
269
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Mini-Tandem Spring Contacts
Note: All part numbers are RoHS compliant.
Mini-Tandem
Spring Housings
Receptacle Contacts
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating C — Duplex plated .000050
[0.00127] over matte tin in contact area,
over .000030 [0.00076] nickel on entire
contact
Plating D — .000100 [0.00254] min.
matte tin over .000030 [0.00076] nickel on
entire contact
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
.060
[1.52]
.085
[2.15] Min.
Contact
Area with
Gold Inlay
.060
[1.52]
Low Pressure Contacts
Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
AWG mm2Range Finish Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
26-22 0.14-0.32 0.36-0.54 Plating A 5531216-3 5531216-4 466819-2 466943-1
[0.64-1.37] Plating B 5531216-1 5531216-2
Standard Pressure Contacts
Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
AWG mm2Range Finish Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
.025-.054 Plating B 530901-2 530901-3
32-28 0.03-0.08 [0.64-1.37] Plating C 5530901-6 5530901-7 466723-1 466952-1
Plating D 5530901-4 5530901-5
.036-.054 Plating B 5530553-4 —
26-22 0.14-0.32 [0.91-1.37] Plating C 5530553-6 — 466819-2 466943-1
Plating D 5530553-2 —
High Pressure Contacts
Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
AWG mm2Range Finish Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
32-28 0.03-0.08 .025-.054 Plating B 5531225-6 — 466723-1 466952-1
[0.64-1.37]
26-22 0.14-0.32 .036-.054 Plating B 5531224-6 — 466819-2 466943-1
[0.91-1.37]
*For use with AMP-O-LECTRIC Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-522-6752)
for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as
other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268.
They cannot be used in AMPMODU Mod IV Housings.
2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above.
3. Application tooling is described on pages 270 & 275.
270
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Application Tooling for Wire Crimp Contacts
Application Tooling
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-to-
board connectors. Refer to
page 88 to determine the
applicable connectors.
This machine automatically
strips as well as terminates
individual wires. Similar to
the AMP-O-LECTRIC Model
“G” machine, applicators
are quickly interchangeable,
and it includes precision
adjustment for crimp height.
All adjustments can be made
from the front of the machine,
without special tools.
For further details, request
TE Catalog 65004.
AMP-O-MATIC Stripper/Crimper Machine
Applicators
Several terminating
machines, including the
AMP-O-LECTRIC Model “G”,
AMP-O-MATIC Stripper/
Crimper and AMPOMATOR
CLS machines, are
designed for use with
interchangeable
applicators. Basic styles are
quickly interchangeable to
minimize costly downtimes,
and feature dial-in wire and
insulation crimp height
settings. Special applicators
are available for use with
the Crimp Force Monitor
(see page 272), for
measuring the crimp height
of each termination as it is
made, plus evaluating the
quality of each crimp.
EDGE, Electronic Applicator
Counter
The new versatile EDGE
applicator counter tracks
wearable tool usage for the
most effective maintenance
planning. The completely
electronic counter with clear
LCD display, indicates
cycles since installation.
By performing maintenance
at measured intervals with
pre-set limits, operators
avoid breakdowns and
rejects caused by tool wear
or mid-adjustment. For more
information, request catalog
1773385.
A totally new design of our
most popular machine for
bench-top operation. It
features a quiet and reliable
direct motor drive, electronic
controls for easy setup and
operation, and improved
guarding and lighting for
operator convenience and
safety. All versions include
either manual or automatic
precision adjustment for
crimp height.
For further details, request
TE Catalog 65828.
Heavy Duty Miniature
Applicators
AMP-O-LECTRIC Model “G” Terminating Machine
(Shown with Optional Crimp Force Monitor)
271
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Application Tooling for Wire Crimp Contacts (Continued)
Application Tooling
As a value oriented
terminator, the AMP 3K/40
and AMP 5K/40 are
designed for customers
that require the increased
output and quality of a
semiautomatic machine at
a competitive price. By
incorporating the most
commonly requested
features as standard and
offering a long list of
optional equipment, these
terminators offer flexibility to
meet the specific needs of
various applications at the
lowest possible cost.
AMP 3K/40 and AMP 5K/40
Terminators
The combination of the
Stripping Module with the
AMP-O-LECTRIC Model G
Terminator or the AMP
3K/40, 5K/40 provides an
economical, proficient
method of stripping wire
and crimping terminals on
the same machine. Wires
are stripped moments
before crimping, meaning
there is virtually no chance
of damaging wire
conductors during handling
or storage. Once the wire is
fed into the start sensor, the
Stripping Module does the
rest, improving placement
accuracy. For more
information, request catalog
1309085.
Optional Stripping Module for
the AMP 3K/40, AMP 5K/40 and
the AMP-O-LECTRIC Model G
AMP 5K/40 Terminator
272
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Application Tooling for Wire Crimp Contacts (Continued)
Application Tooling
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-to-
board connectors. Refer to
page 88 to determine the
applicable connectors.
The AMPOMATOR
System III is an automatic
machine for the production
of terminated wire leads.
The machine combines
state of the art technology
to process single and
double wire application
utilizing the wire processing
industry’s best and most
friendly subsystems and
accessories available to
meet the latest market
requirements for wire lead
production.
The new machine
incorporates a servo-driven,
software-controlled
AMP-O-LECTRIC ST III
terminator and the next
generation System III
Applicator.
See catalog 1654956-5 for
more information.
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shouldered-
style die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and to
help minimize contact rota-
tion and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
Your quality program calls
for more than a good
crimping system. It
demands proof - the proof
you get with the SLE Crimp
Force Monitor. It has high-
resolution piezo-quartz
sensor technology for a
more precise identification
of typical crimping faults.
The monitor features Zone &
Peak Force Analysis,
128x128 Dot Matrix, Force
Trigger and Encoder
Proximity Trigger, and
Absolute Force
Measurement for real-time
monitoring of every crimp.
The CFM can be used with
bench or fully-automatic
machines. Special
applicators are not required.
Sure, you can sample and
test crimp height with a
micrometer. In fact, that’s
how you standardize your
process. But for ongoing
quality control, testing every
crimp, SLE is the choice. It’s
known worldwide, and
meets our standards for a
high performance
terminating system. That’s
how you can be sure.
High quality crimping - with
verification - means higher
production and productivity.
AMPOMATOR System III Leadmaker
Crimp Force Monitor (CFM)
Premium CERTI-CRIMP Straight
Action Hand Tool (SAHT)
Commercial PRO-CRIMPER III
Hand Tool
TE hand tools are ideal for
small production and proto-
type applications. They fea-
ture ratchet control to help
eliminate partial crimps,
straight-line die closure, ter-
minal locator and support,
and insulation crimp adjust-
ment. TE hand tools also
can be adapted for use with
pneumatic tooling assem-
blies, providing air operated
crimping capabilities.
For further details on TE
straight action hand tools,
request TE Catalog 65780.
For more details on TE
pneumatic tooling assem-
blies, call the TE Technical
Support Center,
1-800-522-6752.
273
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors
Note: All part numbers are RoHS compliant.
Application Tooling
Pistol Grip Manual and
Air Powered Tools
The manual pistol grip tool
features an interchange-
able modular terminating
head which also can be
used in the pneumatic ver-
sion, the Bench Mount
Pneumatic Power Assembly
and the IDC Electric Power
Unit. The head terminates
one unstripped wire per
cycle and indexes the con-
nector to the next terminat-
ing position. The head
rotates to permit optimum
access to the wiring area.
The Bench Mount Pneumatic
Power Assembly is air actu-
ated with either a foot or
knee switch. This capability
frees the operator’s hands
for optimum positioning.
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
58395-1 (for Level V IDC connectors)
58540-1 (for MTE connectors, discrete
wire or flat ribbon cable)
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applica-
ble connectors.
Bench Mounted Pneumatic Power Assembly
No. 58338-1
IDC Electric Power Unit
This electrically powered
semiautomatic bench
machine is designed for
applying AMPMODU MTE
and MT connectors to dis-
crete wires. It is portable
and compact and uses
existing pistol grip modular
heads. The heads are easily
interchanged to run different
products. *The IDC Electric
Power Unit’s cycle rate is
approximately 7,200 cycles
per hour, with exact produc-
tion rates depending upon
operator dexterity.
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
Pneumatic Pistol Grip
Tool No. 58075-1
Manual Pistol Grip
Tool No. 58074-1
IDC Electric Power Unit
No. 931800-1
*A tube-fed track assembly, Part No.
856675-1, also can be used with
MTE Connectors.
This modular head tool can
be used on any pistol grip
tool. It was designed for dis-
crete wire or flat ribbon cable
applications.
Modular Head
Tool No. 58540-1
274
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Application Tooling
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the appli-
cable connectors.
Tube-Fed Ribbon Cable Machine
2700 lb. Power Unit With
Cable Notching Die
Equipped with a cable
notching die an adapter kit,
this fully pneumatic bench
machine provides the 2700 lb
[12 010N] force required for
end-notching ribbon cable.
It features a grooved cable
support plate, a pressure
plate and a cable stop to
facilitate cable alignment
and positioning during the
notching process.
Notching Dies:
854449-1 (for 24-22 AWG
[0.2-0.6 mm2] Wire
854449-2 (for 28-26 AWG
[0.08-0.15 mm2] Wire
Tube-Fed Ribbon Cable Machine No. 856002-1
2700 lb. Power Unit
No. 312522-1
spring-driven unit which
conveys connectors
through the product tube to
the terminating station. The
air-operated terminating sta-
tion positions and termi-
nates contacts onto the
notched cable. The seating
station is manually operated
and seats connector hous-
ings onto the terminated
contacts.
Designed for bench appli-
cations, this machine is
pneumatically operated and
controlled by a foot pedal. It
terminates connectors onto
end-notched ribbon cable.
*The connectors are sup-
plied in strip form and in
plastic tubes. The machine
consists of three basic sub-
assemblies: a feed track, a
terminating station and a
seating station. The feed
track is a constant force,
*At a rate of 13-25 positions at a time.
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors (Continued)
275
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Note: All part numbers are RoHS compliant.
Application Tooling
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors (Continued)
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applica-
ble connectors.
CHAMPOMATOR Model 2.5 Terminating Machine No. 354786-(*)
This compact bench
machine terminates wires
manually sorted from
multiconductor cables.
Termination sequence may
include full termination of all
contacts, or selective termi-
nation. Designed for easy
programming, the machine
is microprocessor controlled
and programmed by a
membrane switch key-
board. It also has an inter-
nal storage capability for
retaining up to 350 cable
assemblies. Connectors
can be terminated with
either straight or right-angle
wire dress.
*For applicable dash nos.,
call the Technical Support
Center: 1-800-522-6752.
For further details, request
TE Catalog 82247
This floor model machine
automatically sorts wires
from multiconductor jack-
eted cable and terminates
them in a user-determined
sequence; either full termina-
tion of all contacts, or selec-
tive termination. Designed
for easy programming, the
machine is microprocessor
controlled and programmed
by a touchscreen. It also has
an internal storage capability
for retaining up to 50 cable
assemblies. Connectors can
be terminated with either
straight or right- angle wire
dress. All cable assemblies
are tested for continuity and
shorts.
*For applicable dash nos.,
call the Technical Support
Center: 1-800-522-6752.
For further details, request
TE Catalog 82247
CHAMPOMATOR Model 3A Terminating Machine No. 761420-(*)
276
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Technical Documents for Board-to-Board Products
Note: All part numbers are RoHS
compliant.
Technical Documents
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineers.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
108-1956 PC/104 and PC/104-Plus Connector Systems
Receptacle Assemblies and Unshrouded Breakaway Headers, Surface-Mount — Pages 109, 110, 185-192:
108-25017 AMPMODU Interconnection System, Two-Piece
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
108-16 ACTION PIN Contacts
108-25017 AMPMODU Interconnection System, Two-Piece
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163:
108-16 ACTION PIN Contacts
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
114-13021 PC/104 and PC/104-Plus Connectors
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
114-9009 AMPMODU Header, Two-Piece, Double Row, Application of
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
114-25018 AMPMODU Mod. II and IV Receptacle Assembly, PC Board Mounted, Vertical,
Application of
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163-167:
114-25028 ACTION PIN Contacts with TE Headers, Application
114-13011 AMPMODU .025 and .045 Square Continuous Posts
Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
408-8502 Future Board Assembly 1424685 for PC/104 and PC/104-Plus Connectors
408-8503 Seating Tool Assembly 1424686 for PC/104 and PC/104-Plus Connectors
408-8504 Pneumatic Seating Tool Assembly 1424930-1 for PC/104 and PC/104-Plus
Connectors
408-8505 Manual Seating Tool Assembly 1424931-1 for PC/104 and PC/104-Plus Connectors
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
408-2636 ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
408-9054 Seating Tools
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
408-7411 Suggestions for Wave Soldering Vertical AMPMODU Receptacles
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163:
408-2636 ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
408-6944 TE Uninsulated Bandolier Post Insertion Tool 91419-1
408-7977 AMPMODU Double Row, Straight Posts, End Shrouds .100 x .100 [0.64 x 0.64] Centers
408-7878 AMPMODU Header Barrier Inserts
408-9054 ACTION PIN Contact Headers Seating Tool, 91170 Series
408-9707 Tool Kit 314818-1 for Breakaway Headers
Handbook Guide to Application of ACTION PIN Contact Connectors
5697
Various technical documents
are available for your use.
277
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Technical Documents for Wire-to-Board Products
Note: All part numbers are RoHS compliant.
Technical Documents
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineers.
Locking Clip Contacts and Housings — Pages 206-209:
108-36028 Connector, Locking Clip, .025 [0.64] Square, Gold
108-36028-1 Connector, Locking Clip, .025 [0.64] Square, Tin
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
108-25007 AMPMODU Mod. V Interconnection System, Wire-Applied (High Pressure)
108-25019 AMPMODU Mod. IV Male Connectors
108-25020 AMPMODU Mod. IV Interconnection System, (Standard Pressure)
108-25021 AMPMODU Mod. IV.V Interconnection System, (Intermediate Pressure)
Short-Point Wire-Applied Contacts and Housings — Pages 221-224:
108-1472 Short-Point Contacts and Housings
AMPMODU MTE Interconnection System — Pages 225-252:
108-25034 AMPMODU MTE Connectors
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
108-25015 AMPMODU MT Standard Pressure Connectors
108-25018 AMPMODU MT High Pressure Connectors
108-25030 AMPMODU MT Shielding Accessories
AMPMODU Level V, IDC Connectors —
108-25028 Interconnection System, Insulation Displacement Connector, IDC Level
Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
108-25031 Tandem Spring Receptacle Contact
Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
Locking Clip Contacts and Housings — Pages 206-209:
114-25006 Contact, Locking Clip, .025 [0.64] Square, Application of
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
114-25003 AMPMODU Mod. IV (Standard Pressure), AMPMODU Mod. IV.V (Intermediate
Pressure) and AMPMODU Mod. V (High Pressure) Receptacle Contacts,
Application of
114-25016 AMPMODU Mod. IV Crimp Pin Contact
Short-Point Wire-Applied Contacts and Housings — Pages 221-224:
114-25038 Short-Point Contacts and Housings
AMPMODU MTE Interconnection System — Pages 225-252:
114-25026 AMPMODU MTE Interconnection System
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
114-25032 AMPMODU MT Interconnection System and Shielding Accessories,
Application of
AMPMODU Level V, IDC Connectors —
114-25020 Interconnection System, IDC Level V, Application of
Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
114-25021 Tandem Spring Receptacle Contact, Application of
Various technical documents
are available for your use.
278
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
5
Technical Documents for Wire-to-Board Products (Continued)
Note: All part numbers are RoHS compliant.
Technical Documents
Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
Locking Clip Contacts and Housings — Pages 206-209:
408-7604 TE Extraction Tool 91084-1
408-7606 TE Locking Clip Contacts and Connectors
408-7627 TE Hand Crimp Tool 90295-1, 28-30 AWG Wire
408-8547 TE Hand Crimp Tool 91533-1, 22-26 AWG Wire
408-9388 TE Hand Crimp Tool 90431-1, 20 AWG Wire
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
408-4379 TE PRO-CRIMPER II Hand Tool
408-7935 AMPMODU Receptacle Connectors with Strain Relief/Pull Tabs
408-8547 TE Hand Tool 91516-1, 91517-1 and 91541-1
408-9451 TE Extraction Tool 843473-1 for AMPMODU Wire-Applied Housings 86308
408-9453 TE Extraction Tools 843996 and 843477 for Removing AMPMODU Crimp Snap-In
Receptacle Contacts from Wire-Applied Housings
AMPMODU MTE Interconnection System — Pages 225-252:
409-5746 TE Electric Power Unit 931800-1
409-5832 MTE Ribbon Cable Terminator 856002-1
408-6789 TE Pneumatic Pistol Handle 58075-1
408-6790 TE Manual Pistol Handle 58074-1
408-6919 AMPMODU MTE Connectors
408-8547 TE Hand Crimp Tool 91518-1 and 91551-1
408-9230 TE Keying Tool 91417-1
408-9359 MTE Modular Terminating Head 58336-1
408-9393 TE Pneumatic Bench Assy. 58338-1
408-9407 TE Hand Crimp Tool 91531-1 and 58342-2
408-9453 TE Extraction Tools 843996 and 843477 for Removing AMPMODU Crimp Snap-In
Receptacle Contacts from Wire-Applied Housings
408-9515 Ribbon Cable Notcher 854449-[]
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
408-6532 AMPMODU MT Connectors
AMPMODU Level V, IDC Connectors —
408-6843 TE Extraction Tool 91409-1
Standard Tandem Spring and Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
408-7909 TE Hand Crimping Tool 91540-1
279
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
6
Level V IDC Connectors, .125 x .125 [3.18 x 3.18] Centerline
.125 [3.18] x .125 [3.18]
Centerline
Product Facts
■Termination of discrete
wire sizes 26-22 AWG
[0.12-0.3 mm2] as well as
jacketed cable and bonded
ribbon cable (conductors
separated)
■Connectors stackable end-
to-end and side-to-side on
.125 [3.18] centers
■Connectors preloaded with
insulation displacement
receptacle contacts
■Contact design employs
dual cantilever beams,
redundant insulation
displacement slots, built-in
post stop and wire support
crimp
■Copper alloy contacts are
duplex plated
■Snap-on covers with or
without cable tie paddles
■Full line of mass
termination tooling offers
lowest installed costs for
most production needs
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
AMPMODU Level V IDC
connectors provide cost
effective discrete wire
connections that are
compatible with today's
telecommunications
packaging techniques.
These connectors are
designed to mate with .025
[0.64] sq. posts on .125 x
.125 [3.18 x 3.18] centers
and are comprised of
double-row housings
preloaded with insulation
displacement receptacle
contacts, snap-on
hermaphroditic covers, and
a full line of mass termination
tooling to meet virtually
every production need. For
modular flexibility, connectors
can be stacked end-to-end
or side-to-side, maintaining
a .125 x .125 [3.18 x 3.18]
centerline spacing.
Covers can be furnished
with and without a cable tie
paddle. The covers are
simply snapped onto a
housing after the connector
has been terminated.
The receptacle contacts
feature the TE insulation
displacement crimp
technique for achieving top
quality, low cost
terminations. These
contacts employ dual
cantilever beams for
redundant interface with a
mating post, an integral
post stop to limit post
mating depth and protect
the crimp termination, and
a wire support (strain relief)
crimp to prevent accidental
wire pull-out. The contacts
are made of high
conductivity copper alloy
and are duplex plated.
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.)
Durability — Ref. Product
Specification 108-25028
(Interconnection System, Insulation
Displacement Connector, IDC Level)
Application Specification
114-25020 (Interconnection System,
IDC Level V, Application of)
R
R
280
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
6
Receptacle Assemblies, Double-Row, .125 x .125 [3.18 x 3.18] Centerline
Note: All part numbers are RoHS compliant.
.125 [3.18] x .125 [3.18]
Centerline
Housings Preloaded with
Insulation Displacement
Crimp Receptacle Contacts
Material and Finish
Housing — Black thermoplastic, flame
retardant
Contacts — Copper alloy, duplex
plated .000050 [0.00127] gold on
contact area, .000100 [0.00254] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Note: Preloaded contacts accept max.
insulation dia. of .050 [1.27]. The mini-
mum point of contact, as measured from
front edge of housing, is .095 [2.41].
Technical Documents —
pages 277, 278
Product Specification
108-25028
Application Specification
114-25020
Receptacle assemblies can be
stacked end-to-end and side-to-
side on .125 x .125 [3.18 x 3.18]
centers.
A
B
.800
[20.32]
No. of Dimensions Receptacle Assembly (Stamped1)
Pos. for 26-22 AWG
AB [0.12-0.3 mm2] Wire
8.493 [12.52] .375 [9.52] 102935-4
10 .618 [15.70] .500 [12.70] 102935-6
12 .743 [18.87] .625 [15.88] 102935-8
16 .993 [25.22] .875 [22.23] 1-102935-2
20 1.243 [31.57] 1.125 [28.58] 1-102935-6
24 1.493 [37.92] 1.375 [34.93] 1-102935-9
30 1.868 [47.45] 1.750 [44.45] 1-102935-3
32 1.993 [50.62] 1.875 [47.63] 2-102935-8
40 2.493 [63.32] 2.375 [60.33] 3-102935-6
1White ink stamped, one side—8- thru 12-position with AMP and arrow; 14- and 16-position with AMP, part no., and
arrow; 18- thru 40-position with AMP, part no., date code and arrow.
Notes: 1. Covers for these housings are shown on pages 281 & 282.
2. Termination tooling for these connectors are shown on page 273-275.
3. 14- and 18-position receptacle assemblies, as well as other sizes, can be made available upon request.
Consult TE.
.298
[7.57]
.059
[1.50]
.243
[6.17]
.125
[3.18] .125
[3.18] T
yp.
281
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
6
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline
Note: All part numbers are RoHS compliant.
.125 [3.18] x .125 [3.18]
Centerline
No. of Dimensions Cover Part Nos.
Pos. Without With With Wide With Wide
(Housing
AB C D E
Cable Tie Cable Tie Cable Tie Cable Tie
Size) Paddle Paddle Paddle Paddle and
Polarization
8.491 [12.47] .150 [3.81] .285 [7.24] .166 [4.22] .125 [3.18] ——103349-4 103350-4
10 .616 [15.65] —— —.125 [3.18] — 103058-3 ——
12 .741 [18.82] —— —.200 [5.08] — 103058-4 ——
16 .991 [25.17] .300 [7.62] .592 [15.04] .416 [10.57] ———103349-1 103350-1
20 1.241 [31.52] .300 [7.62] .592 [15.04] .541 [13.74] ———103349-5 103350-5
24 1.491 [37.87] ———.400 [10.16] 1-103056-0 1-103058-0 ——
32 1.991 [50.57] .600 [15.24] 1.312 [33.32] .916 [23.27] ———103349-2 103350-2
40 2.491 [63.27] .750 [19.05] 1.820 [46.23] 1.166 [29.61] ———103349-3 103350-3
64 See page 282 for Double Cable Tie Paddle versions.
Notes: 1. Two hermaphroditic covers of any style can be installed on a double-row connector housing.
2. Other sizes can be made available upon request.
All covers illustrated here
and on the following page
can be used on the double-
row Level V IDC connectors
shown on page 280.
Material
Black thermoplastic, flame retardant,
94V-0 rated
Cover 103056 Series
without Cable Tie Paddle
Cover 103058 Series
with Cable Tie Paddle
Cover 103349 Series
with Wide Cable Tie Paddle
A
.603
[15.32]
.125
[3.18]
Typ.
A
.603
[15.32]
A
.605
[15.37]
1.105
[28.07]
Cable Tie
Paddle
B
C
.125
[3.18]
Typ.
A
.605
[15.37]
.125
[3.18] Typ.
.125
[3.18]
Typ.
Cover 103350 Series
with Wide Cable Tie Paddle
and Polarization
.100
[2.54]
(2 Plc.)
Cable Tie
Paddle
D
282
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
6
Note: All part numbers are RoHS compliant.
.125 [3.18] x .125 [3.18]
Centerline
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline (Continued)
.603
[15.32]
.100
[2.54]
Typ.
1.103
[28.02]
Cable Tie Paddle
.125
[3.18] Typ.
1.312
[33.32] Typ.
.600
[15.24] Typ.
3.991
[101.37]
Cover Part No. 104583-1, 64-Position
with Double Cable Tie Paddle
.603
[15.32]
.100
[2.54]
Typ.
1.103
[28.02]
Cable Tie Paddle
.125
[3.18] Typ.
1.312
[33.32] Typ.
.600
[15.24] Typ.
3.991
[101.37]
Cover Part No. 104584-1, 64-Position
with Double Cable Tie Paddle
and Polarization
.916
[23.27]
283
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System
Mod I 0.031 x 0.062
Interconnection System
The .031 x .062 [0.79 x 1.57]
interconnection system
has served as an industry
standard for modular
packaging for over three
decades. It is a rugged,
large scale system
designed for board-to-board
and board-to-wire or cable
applications that has offered
millions of reliable
interconnections and
countless mating cycles.
This versatile interconnection
system successfully meets
the requirements for most
modular power supply
packaging.
Board mounted receptacles
and receptacle assemblies
are available in various
geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking
capabilities. Machine
applied terminations,
through matched
application equipment,
are geared to virtually any
production requirement,
assuring the lowest possible
applied cost.
Crimp snap-in receptacles
for 26-18 AWG [0.12 –
0.9mm2] wire provide
excellent discrete wire
terminations. Housings for
these contacts provide for
ease of handling
terminations in high density
applications.
AMPMODU mating posts
are supplied typically as
header assemblies. They are
available in various sizes to
meet the interconnection
and packaging requirements
of your system. However, in
instances where packaging
configurations do not
lend themselves to the
economies of assemblies,
TE can provide for the
discrete location of
individual posts and
receptacles.
If your interconnections
require Top Entry, Bottom
Entry and/or Side Entry for
perpendicular, parallel and
stacked configurations, the
.031 x .062 [0.79 x 1.57]
interconnection system can
fulfill your needs with the
lowest applied cost through
efficient interconnections
and supporting application
equipment.
Product Facts
■Rugged connector system
featuring .031 x .062
[0.79 x 1.57] posts with
mating receptacles
■Current rating 5 amps max
per contact. Varies due to
ambient temperature, wire
size and duty cycles.
■Available for board-to-board
and wire-to-board
applications
■Posts available on strip
for machine application
directly to pc board or in
housings for board
mounting
■Receptacles available for
board mounting or wire
crimping
■Contacts available in both
tin and gold plating
■Flame retardant
thermoplastic housings
94V-0 rated
■Locking Clip contacts
available to mate with
.031 x .062 [0.79 x 1.57]
posts
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 16455
R
R
284
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System (Continued)
Mod I 0.031 x 0.062
Interconnection System
The AMPMODU receptacle
cross-section is primarily
rectangular, with rounded
corners. Two integral
cantilever beams contact
the mating square or
rectangular posts.
Deflection of these spring
members is limited by anti-
overstress and excessive
permanent deformation is
prevented. This feature
allows a wide range of
tolerances for misalignment
of mating contacts.
The configuration of the
receptacle completely
encloses the spring
members preventing
damage during handling
and assembly and makes
the system compatible with
automatic application
techniques.
This design also permits
the use of the receptacles
without housings or
encapsulation.
Note: Application of a
contact lubricant is part of
the manufacturing process
of all AMPMODU tin-plated
crimp products. However,
it is not part of the
manufacturing process of
products that customers will
solder, then clean. For these
products, TE recommends
that customers purchase a
contact lubricant. (See
application specification
114-25004 for further
information.)
Rugged-self supporting, one-
piece contact body
Reliability-dual
cantilever spring
contact design
and built-in
anti-overstress
Offers high or low
contact forces
Cantilever
Beams
Wide
Misalignment
Tolerance
Wide entry for post to
receptacle
misalignment
Anti-overstress
Insulation Support
Barrel
Wire Crimp Receptacle
Standard Profile
Housing, Unkeyed
for Crimp Snap-In
Receptacles
(Page 291 & 292)
Locking Clip
Contacts
(Page 298)
Locking Clip
Connector
(Page 299)
Header, Right-Angle
Post, Keyed
(Page 297)
Header, Right-Angle
Post, Keyed
(Page 297)
Receptacles,
Crimp Snap-In
(Page 290)
Low Profile
Housing, Keyed
(Page 293)
Straight Posts
Machine Applied
(Page 294)
Straight Posts
Machine Applied
(Page 294)
Board Mount
Receptacle
Assembly,
Horizontal
(Pages 288 & 289)
Board Mount
Receptacle
Assembly,
Vertical
(Page 287)
Header, Straight Post
(Pages 295 & 296)
Board Mount
Receptacles,
Horizontal
and Vertical
Styles
(Pages 285 & 286)
Header, Right-Angle
Post, Keyed
(Page 297)
285
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Board Mount
Related Product Data
Recommended Board Layout for
Type C — page 288
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Application Tooling —
pages 300-304
Performance Specifications —
page 305
Technical Documents —
page 305
Recommended Board Layout for Receptacle Assemblies
and Individual Receptacles (Type A and B)
J-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .150 [3.81]; for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board. For solder mask, see
TE Instruction Sheet 408-7411.
Note: Drawings depict normal use of the contact in a one or two-sided circuit board. When using plated thru-holes,
refer to TE Engineering Report ER-001 and TE Instruction Sheet 408-7411. For solder mask, see TE Instruction Sheet
408-7411.
Vertical and Horizontal
Board Mount
Part No. 86181-2
Use in Board Mount Receptacles
Keying Plug
Round Hole
(Post Entry Type A or B)
Bottom
Post Entry
Type A
Top
Post Entry
Type B
Horizontal
Post Entry
Type C
.093 Max.
[0.99]
.093 Max.
[2.36]
.125 Max.
[3.18]
.100 Min.
[2.54]
.125 Max.
[3.18]
.125 Max.
[3.18]
.300
[7.62]
.125
[3.18]
J±.003
[±0.08]
2J ±.003
[±0.08]
.055
[1.40]
Min. .125±.002
[3.18±0.05]
.300
[7.62]
.300
[7.62]
.093 Max.
[0.99]
Receptacle Styles
286
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Board Mount
Board Dimension Standard Pressure High Pressure Insertion
Type Thickness T Finish Part Nos. Part Nos. Applicator No. for
Range (Ref. Pg. 285 )Strip Form Loose Piece Strip Form Loose Piece “U” Frame Machine
Plating A 86477-2 86480-2 —— 466376-1
A.070-.055 [1.78-1.40] .112 [2.84] Plating B 86477-3 — 87316-3 — 466376-1
Plating C (Solder Resist) 87772-2 ———466376-1
Plating A 87003-1 87105-1 —— 466376-1
B.070-.055 [1.78-1.40] .112 [2.84] Plating B 87003-2 ———466376-1
Plating C (Solder Resist) 87774-2 ———466376-1
CPlating A 85487-4 85493-4 86432-8 86434-6 565967-3
.103-.055 [2.62-1.40] .145 [3.68] Plating B 85487-3 — 86432-1 86434-1
Notes: 1. All strip form parts in packaged quantities of 5,000 each.
2. All loose piece parts in packaged quantities of 500 each.
Material and Finish
Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
Plating C — (Solder Resist) —
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area,
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished
Standard Pressure
Receptacle
High Pressure
Receptacle
.010
[0.25]
Max.
.020
[0.51]
Max.
.210
[5.33]
.210
[5.33]
287
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Receptacle Assemblies, Vertical Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Vertical Board Mount
No. Dimensions Type A Type B
of Standard Pressure High Pressure Standard Pressure
Pos. AB
Plating A Plating B Plating C Plating B Plating A Plating B Plating C
2.156 [3.96] .312 [7.92] 87984-2 87983-2 87989-2 87993-2 87986-2 87985-2 87990-2
3.312 [7.92] .468 [11.89] 87984-3 87983-3 87989-3 87993-3 87986-3 87985-3 87990-3
4.468 [11.89] .624 [15.85] 87984-4 87983-4 87989-4 87993-4 87986-4 87985-4 87990-4
5.624 [15.85] .780 [19.81] 87984-5 87983-5 87989-5 87993-5 87986-5 87985-5 87990-5
6.780 [19.81] .936 [23.77] 87984-6 87983-6 87989-6 87993-6 87986-6 87985-6 87990-6
7.936 [23.77] 1.092 [27.74] 87984-7 87983-7 87989-7 87993-7 87986-7 87985-7 87990-7
81.092 [27.74] 1.248 [31.70] 87984-8 87983-8 87989-8 87993-8 87986-8 87985-8 87990-8
91.248 [31.70] 1.404 [35.66] 87984-9 87983-9 87989-9 87993-9 87986-9 87985-9 87990-9
10 1.404 [35.66] 1.560 [39.62] 1-87984-0 1-87983-0 1-87989-0 1-87993-0 1-87986-0 1-87985-0 1-87990-0
11 1.560 [39.62 1.716 [43.59] 1-87984-1 1-87983-1 1-87989-1 1-87993-1 1-87986-1 1-87985-1 1-87990-1
12 1.716 [43.59] 1.872 [47.55] 1-87984-2 1-87983-2 1-87989-2 1-87993-2 1-87986-2 1-87985-2 1-87990-2
13 1.872 [47.55] 2.028 [51.51] 1-87984-3 1-87983-3 1-87989-3 1-87993-3 1-87986-3 1-87985-3 1-87990-3
14 2.028 [51.51] 2.184 [55.47] 1-87984-4 1-87983-4 1-87989-4 1-87993-4 1-87986-4 1-87985-4 1-87990-4
15 2.184 [55.47] 2.340 [59.44] 1-87984-5 1-87983-5 1-87989-5 1-87993-5 1-87986-5 1-87985-5 1-87990-5
16 2.340 [59.44] 2.496 [63.40] 1-87984-6 1-87983-6 1-87989-6 1-87993-6 1-87986-6 1-87985-6 1-87990-6
17 2.496 [63.40] 2.652 [67.36] 1-87984-7 1-87983-7 1-87989-7 1-87993-7 1-87986-7 1-87985-7 1-87990-7
18 2.652 [67.36] 2.808 [71.32] 1-87984-8 1-87983-8 1-87989-8 1-87993-8 1-87986-8 1-87985-8 1-87990-8
19 2.808 [71.32] 2.964 [75.29] 1-87984-9 1-87983-9 1-87989-9 1-87993-9 1-87986-9 1-87985-9 1-87990-9
20 2.964 [75.29] 3.120 [79.25] 2-87984-0 2-87983-0 2-87989-0 2-87993-0 2-87986-0 2-87985-0 2-87990-0
Single Row .156 [3.96]
Centerline
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Contacts — Copper alloy, plated as
follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
Plating C — (Solder Resist) —
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area,
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished
Related Product Data
Recommended Board Layout —
page 288
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Part No. 86181-2
(Use in Board Mount
Receptacles)
Post Entry
Type A
Post Entry
Type B
Keying Plug
X-X
X X
.182
[4.62]
.018
[0.46]
.175±.007
[4.45±0.18]
.300±.003
[7.62±0.08]
.046
[1.17]
Contact
Area
B±.015
[±0.38]
A
.156
[3.96] T
yp.
The letter A
stamped on
contact indicates
mating end of
receptacle.
.112-.000
[2.84±0.00]
+.010
+0.25
288
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Horizontal Board Mount
Single Row .156 [3.96]
Centers
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Contacts — Copper alloy, plated as
follows:
Plating A — Selectively plated
.000030 [0.00076] gold contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
Related Product Data
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Recommended Board
Layouts for Receptacle
Assemblies and Individual
Receptacles (Type C)
The mating post length is depicted by the A dimension on page 294 (machine applied posts) and the C dimension on
pages 295-297 (headers).
H-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .125 [3.18] for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board.
This configuration recommended
for use with machine applied posts
or headers with a .500 [12.70]
minimum mating end post length.*
This configuration recommended
for use with machine applied posts
or headers with a .345 [18.76]
minimum mating end post length.*
This configuration recommended
for use with machine applied posts
or headers with a .405 [10.29]
minimum mating end post length.*
Post Entry
Type C
Part No. 86181-2
(Use in Board Mount
Receptacles)
Keying Plug
H±.003
[±0.08]
.055±.005
[1.40±0.13]
.340
+.005
-.000
]
2H ±.003
[±0.08]
[
[8.64+0.13]
H±.003
[±0.08]
.340
+.005
-.000
]
2H ±.003
[±0.08]
[
[8.64+0.13]
H±.003
[±0.08]
.073±.003
[1.85±0.08]
Typ. Dia.
.100
[2.54]
Max.
.073±.003
[1.85±0.08]
Typ. Dia.
.073±.003
[1.85±0.08]
Typ. Dia.
.340
+.005
-.000
]
2H ±.003
[±0.08]
[
[8.64+0.13]
X-X
X X
.182
[4.62]
.145
[3.68]
.300±.003
[7.62±0.08]
.175±.007
[4.45±0.18]
.333±.010
[8.46±0.25]
.018
[0.46]
.046
[1.17]
Contact
Area
B±.015
[±0.38]
A
.156
[3.96] Typ.
The letter A stamped
on contact indicates
mating end of recep-
tacle.
289
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Horizontal Board Mount
No. of Dimensions Standard Pressure High Pressure
Pos. ABPlating A Plating B Plating B
2.156 [3.96] .312 [7.92] 87988-2 87987-2 87995-2
3.312 [7.92] .468 [11.89] 87988-3 87987-3 87995-3
4.468 [11.89] .624 [15.85] 87988-4 87987-4 87995-4
5.624 [15.85] .780 [19.81] 87988-5 87987-5 87995-5
6.780 [19.81] .936 [23.77] 87988-6 87987-6 87995-6
7.936 [23.77] 1.092 [27.74] 87988-7 87987-7 87995-7
81.092 [27.74] 1.248 [31.70] 87988-8 87987-8 87995-8
91.248 [31.70] 1.404 [35.66] 87988-9 87987-9 87995-9
10 1.404 [35.66] 1.560 [39.62] 1-87988-0 1-87987-0 1-87995-0
11 1.560 [39.62] 1.716 [43.59] 1-87988-1 1-87987-1 1-87995-1
121.716 [43.59] 1.872 [47.55] 1-87988-2 1-87987-2 1-87995-2
13 1.872 [47.54] 2.028 [51.51] 1-87988-3 1-87987-3 1-87995-3
14 2.028 [51.51] 2.184 [55.47] 1-87988-4 1-87987-4 1-87995-4
152.184 [55.47] 2.340 [59.44] 1-87988-5 1-87987-5 1-87995-5
162.340 [59.44] 2.496 [63.40] 1-87988-6 1-87987-6 1-87995-6
17 2.496 [63.40] 2.652 [67.36] 1-87988-7 1-87987-7 1-87995-7
18 2.652 [67.36] 2.808 [71.32] 1-87988-8 1-87987-8 1-87995-8
192.808 [71.32] 2.964 [75.29] 1-87988-9 1-87987-9 1-87995-9
20 2.964 [75.29] 3.120 [79.25] 2-87988-0 2-87987-0 2-87995-0
290
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
7
Mod I Receptacles, Crimp Snap-In (Wire Applied),
.031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Crimp Snap-In
Standard Pressure
Wire Size Range Ins. Dia. Finish Strip Form Loose Piece
AWG [mm2]Range Packaged Part Packaged Part
Quantities Nos. Quantities Nos.
22-18 [0.3-0.9] .051-.090 [1.30–2.29] Plating A 5,000 102099-2 500 102103-2
Plating B 5,000 102099-5 500 102103-3
Wire Size Range
Applicator (High Pressure) Premium
AWG [mm2]Part Used With CERTI-CRIMP
Number Type Machine Hand Tool
Part Number
466764-3 HDM Model "G" (AMP-O-LECTRIC)
22-18 [0.3-0.9] 466764-2 HDM Model "K" (AMP-O-LECTRIC) 90274-2
466764-1 HDM CLS IV+ (AMPOMATOR)
466937-1 SCA Stripper-Crimper (AMP-O-MATIC)
26-22 [0.12-0.4] 466763-2 HDM Model "K" (AMP-O-LECTRIC) 90328-1
466763-1 HDM CLS IV+ (AMPOMATOR)
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult TE.
High Pressure
Wire Size Range Ins. Dia. Finish Strip Form Loose Piece
AWG [mm2] Range Packaged Part Packaged Part
Quantities Nos. Quantities Nos.
22-18 [0.3-0.9] .051-.090 [1.30–2.29] Plating A 5,000 102100-2 500 102104-2
Plating B 5,000 102100-5 500 102104-3
26-22 [0.12-0.4] 0.42-.073 [1.07-1.85] Plating A 5,000 102102-2 500 102106-2
Plating B 5,000 102102-5 500 102106-3
Applicator (Standard Pressure) Premium
Wire Size Range Part Used With CERTI-CRIMP
AWG [mm2]Number Type Machine Hand Tool
Part Number
466764-3 HDM Model "G" (AMP-O-LECTRIC)
22-18 466764-2 HDM Model "K" (AMP-O-LECTRIC)
[0.3-0.9] 466764-1 HDM CLS IV+ (AMPOMATOR) 90274-2
466937-1 SCA Stripper-Crimper (AMP-O-MATIC)
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult TE.
Material and Finish
Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000016 [0.00041] min.
tin on entire contact
Related Product Data
Housings used in — pages 291-293
Mate with Machine Applied
Posts — page 294
Headers — pages 295-297
Application Tooling — page 300-304
Performance Specification —
page 305
Technical Documents —
page 305
.014
[0.36]
Max.
.020
[0.51]
Max.
.210
[5.33]
.210
[5.33]
High Pressure Receptacle
Standard Pressure
Receptacle
Extraction Tool Part No. 843473-1
Part Instruction Sheet 408-9451
.125
[3.18] Max.
.093
[2.36]
Max.
.280
[7.11]
.580
[14.73]
AMPMODU Interconnection System
291
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Receptacle
Housings
No. of Dimensions Housing Part Nos.
Pos. AB L Stamped1Unstamped2
21.156 [3.96] .312 [7.92] — 2-87025-5
32.312 [7.92] .468 [11.89] — 2-87025-1
43.468 [11.89] .624 [15.85] — 1-87025-3
54.624 [15.85] .780 [19.81] — 2-87025-3
65.780 [19.81] .936 [23.77] 87025-1 87025-2
76.936 [23.77] 1.092 [27.74] — 3-87025-4
871.092 [27.74] 1.248 [31.70] — 1-87025-6
981.248 [31.70] 1.404 [35.66] 87025-9 1-87025-0
10 9 1.404 [35.66] 1.560 [39.62] 1-87025-7 1-87025-8
11 10 1.560 [39.62] 1.716 [43.59] — 3-87025-6
12 11 1.716 [43.59] 1.872 [47.55] 1-87025-1 1-87025-2
13 12 1.872 [47.55] 2.028 [51.51] — 3-87025-0
14 13 2.028 [51.51] 2.184 [55.47] — 3-87025-8
15 14 2.184 [55.47] 2.340 [59.44] — 3-87025-2
16 15 2.340 [59.44] 2.496 [63.40] — 2-87025-0
17 16 2.496 [63.40] 2.652 [67.36] — 4-87025-0
18 17 2.652 [67.36] 2.808 [71.32] — 87025-4
19 18 2.808 [71.32] 2.964 [75.29] — 87025-6
20 19 2.964 [75.29] 3.120 [79.25] — 87025-8
25 24 3.744 [95.10] 3.900 [99.06] — 5-87025-0
Notes: 1Markings on housing.
2No markings on housing.
Single Row, .156 [3.96]
Centers, Without Strain
Relief
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Contacts used with — page 290
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Locking Ledge
Identification
Identifiers on ends of
housing are optional at
AMP’s discretion
.030±.010
[0.76±0.25]
.790
[20.07]
A spaces @ .156±.003 = B ±.003
[3.96±0.08] [±0.08]
.077
[1.96]
.156
[3.96] Typ.
.120
[3.05] Typ.
.250
[6.35] Max.
L±.015
[±0.38]
Y
Y
Y-Y
292
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Mod I Receptacle
Housings
Single Row, .156 [3.96]
Centers, With Strain Relief
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Contacts used with — page 290
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
10 Position Receptacle Housing, Part No. 1-102090-0
.992
[25.20]
.397
[10.08]
.446
[11.33] .298 [7.57]
.206±.020
[5.23±0.51]
.694
[17.63]
.843
[21.41]
.040
[1.02]
.290
[7.37]
.094
[2.39] Dia.
4 Plc.
1.640
[41.66]
1.560
[39.62]
293
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Receptacle Housings, Low Profile, Keyed,
.031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Receptacle
Housings
Keying Plug References
Wire Exit Face Wire Exit Face
Post
Mating Face
Post
Mating Face
Keying Plug
Material — Natural Color Nylon
Single Row, .156 [3.96]
Centers
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Contacts used with — page 290
Mate with —
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Fits
through
.125 [3.18]
Dia. Hole
.050
[1.27]
.160
[4.06]
Keying Plug
87116-2
(Flush)
Keying Plug
87116-2
(Flush)
For Standard Housings For Low Profile Housings
Locking Ledge
Identification
Identifiers on ends of
housing are optional at
AMP’s discretion
.030±.010
[0.76±0.25]
.640
[16.26]
A spaces @ .156±.003 = B ±.003
[3.96±0.08] [±0.08]
.077
[1.96]
.040
[1.02]
.125
[3.18]
.075
[1.91] Typ.
.156
[3.96] Typ.
.120
[3.05] Typ.
.250
[6.35] Max.
L±.015
[±0.38]
No. of Dimensions No. of Housing Part Nos. Key
Pos. Keys (Unstamped)1Locations
AB L
21.156 [3.96] .312 [7.92] 1 87159-3 A
32.312 [7.92] .468 [11.89] 1 87159-4 A
43.468 [11.89] .624 [15.85] 2 87159-5 A,C
54.624 [15.85] .780 [19.81] 2 87159-1 A,D
65.780 [19.81] .936 [23.77] 3 87159-6 A,C,E
76.936 [23.77] 1.092 [27.74] 3 87159-7 A,C,E
871.092 [27.74] 1.248 [31.70] 4 87159-8 A,C,E,G
981.248 [31.70] 1.404 [35.66] 3 87159-9 A,D,G
10 9 1.404 [35.66] 1.560 [39.62] 5 1-87159-0 A,C,E,G,J
11 10 1.560 [39.62] 1.716 [43.59] 4 1-87159-1 A,D,G,K
12 11 1.716 [43.59] 1.872 [47.55] 6 1-87159-2 A,C,E,G,J,L
13 12 1.872 [47.55] 2.028 [51.51] 4 87159-2 A,D,J,M
14 13 2.028 [51.51] 2.184 [55.47] 7 1-87159-3 A,C,E,G,J,L,N
15 14 2.184 [55.47] 2.340 [59.44] 5 1-87159-4 A,D,G,K,N
16 15 2.340 [59.44] 2.496 [63.40] 8 1-87159-5 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.652 [67.36] 6 1-87159-6 A,D,G,K,N,R
18 17 2.652 [67.36] 2.808 [71.32] 6 1-87159-7 A,D,F,J,P,S
19 18 2.808 [71.32] 2.964 [75.29] 8 1-87159-8 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.120 [79.25] 10 1-87159-9 A,C,E,G,J,L,N,Q,S,U
25 24 3.744 [95.10] 3.900 [99.06] 11 2-87159-4 A,C,E,H,K,M,Q,S,U,W,Y
1No marking on housing.
Part No. 87116-2
294
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Posts, Machine Applied, .031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Posts,
Machine Applied
Dimensions Finish Part Nos.
ABC Strip Form1Loose Piece2
.360 [9.14] .187 [4.75] .595 [15.11] Plating A 86147-7 86182-7
Plating B 5086147-2 5086182-2
.380 [9.65] .320 [8.13] .748 [19.00] Plating A 1-86147-5 1-86182-5
Plating B 5086147-9 5086182-9
.400 [10.16] .125 [3.18] .573 [14.55] Plating A 4-86147-2 2-86182-9
Plating B 3-5086147-7 2-5086182-5
.480 [12.19] .187 [4.75] .715 [18.16] Plating A 1-86147-8 1-86182-8
Plating B 2-5086147-2 2-5086182-2
.565 [14.35] .187 [4.75] .800 [20.32] Plating A 86147-8 86182-8
Plating B 5086147-1 5086182-1
.800 [20.32] .150 [3.81] .998 [25.35] Plating A 1-86147-2 1-86182-2
Plating B 1-5086147-0 1-5086182-0
1 Packaging quantity of 20,000 per reel.
2 Packaging quantity of 1,000 per bag.
Note: Strip form posts applied with Insertion Machine No. 3-457382-1, includes power unit and applicator.
Typical Assembly
Straight Posts
Material and Finish
Brass, plated .000030 [0.00076] gold
over .000050 [0.00127] nickel on entire
post
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts &
Housings — pages 298, 299 (see page
298 for recommended post length).
Application Tooling —
pages 300-304
Performance Specifications —
page 305
Technical Documents —
page 305
D—Post centers may vary depending on requirements. Minimum nominal
centerline spacing between adjacent contacts is .125 [3.18]; .003 [0.08]
tolerances not to accumulate over length of board.
E—Post center location from edge of board may vary to satisfy application.
Recommended Mounting Holes
.048
[1.22]
.080
[2.03]
.062
[1.57]
.031
[0.78]
.078±.002
[1.98±0.05] Dia.
(Drilled Hole)
.150
[3.81]
.150
[3.81] Cut Off
D±.003
[±0.08]
E
A B
C
2D ±.003
[±0.08]
295
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Headers, Straight Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Headers
Single Row, .156 [3.96]
Centers
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
min. nickel on entire post
Plating B — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00762] nickel on entire post
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts &
Housings — pages 298 & 299 (see
page 298 for recommended post length).
Performance Specifications —
page 305
Technical Documents —
page 305
No. of Dimensions No. of Post Height Post Height
Keyway
Pos. Keying D=.405 [10.29] D=.587 [14.91] Locations
ABC
Slots Plating A Plating B Plating A Plating B
21.156 [3.96] .267 [6.78] 1 85829-2 5-87160-4 87247-2 5-87262-2 A
32.312 [7.92] .423 [10.74] 1 85829-3 5-87160-5 87247-3 5-87262-3 A
43.468 [11.89] .579 [14.71] 2 85829-4 5-87160-6 87247-4 5-87262-4 A,C
54.624 [15.85] .735 [18.67] 2 85829-5 5-87160-1 87247-5 5-87262-5 A,D
65.780 [19.81] .891 [22.63] 3 85829-6 5-87160-7 87247-6 5-87262-6 A,C,E
76.936 [23.77] 1.047 [26.59] 3 85829-7 5-87160-8 87247-7 5-87262-7 A,C,E,
871.092 [27.74] 1.203 [30.56] 4 85829-8 5-87160-9 87247-8 5-87262-8 A,C,E,G
981.248 [31.70] 1.359 [34.52] 3 85829-9 6-87160-0 87247-9 5-87262-9 A,D,G
10 9 1.404 [35.66] 1.515 [38.48] 5 1-85829-0 6-87160-1 1-87247-0 6-87262-0 A,C,E,G,J
11 10 1.560 [39.62] 1.671 [42.44] 4 1-85829-1 6-87160-2 1-87247-1 6-87262-1 A,D,G,K
12 11 1.716 [43.59] 1.827 [46.41] 6 1-85829-2 6-87160-3 1-87247-2 6-87262-2 A,C,E,G,J,L
13 12 1.872 [47.55] 1.983 [50.37] 4 1-85829-3 5-87160-2 1-87247-3 6-87262-3 A,D,J,M
14 13 2.028 [51.51] 2.139 [54.33] 7 1-85829-4 6-87160-4 1-87247-4 6-87262-4 A,C,E,G,J,L,N
15 14 2.184 [55.47] 2.295 [58.29] 5 1-85829-5 6-87160-5 1-87247-5 6-87262-5 A,D,G,K,N
16 15 2.340 [59.44] 2.451 [62.26] 8 1-85829-6 6-87160-6 1-87247-6 6-87262-6 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.607 [66.22] 6 1-85829-7 6-87160-7 1-87247-7 6-87262-7 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-85829-8 6-87160-8 1-87247-8 6-87262-8 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-85829-9 6-87160-9 1-87247-9 6-87262-9 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.075 [78.11] 10 2-85829-0 7-87160-0 2-87247-0 7-87262-0 A,C,E,G,J,L,N,Q,S,U
21 20 3.120 [79.25] 3.231 [82.07] 7 2-85829-1 7-87160-1 2-87247-1 7-87262-1 A,D,G,K,N,R,U
22 21 3.276 [83.21] 3.387 [86.03] 11 2-85829-2 7-87160-2 2-87247-2 7-87262-2 A,C,E,G,J,L,N,Q,S,U,W
23 22 3.432 [87.17] 3.543 [89.99] 8 2-85829-3 7-87160-3 2-87247-3 7-87262-3 A,D,G,K,N,R,U,X
24 23 3.588 [91.14] 3.699 [93.95] 12 2-85829-4 7-87160-4 2-87247-4 7-87262-4 A,C,E,G,J,L,N,Q,S,U,W,Y
25 24 3.744 [95.10] 3.855 [97.92] 11 2-85829-5 7-87160-5 2-87247-5 7-87262-5 A,C,E,H,K,M,Q,S,U,W,Y
Recommended Board Layout
.312±.003
[7.92±0.08]
.156±.003
[3.96±0.08]
.125 [3.18]
.055±.003
[1.40±0.08]
Dia.
.250±.010
[6.35±0.25]
See chart
for locations
.250±.010
[6.35±0.25]
.405±.010
[10.29±0.25]
C
1.00
[2.54] T
yp. Keyway
A spaces @ .156±.003 = B ±.003
[3.96±0.08] [±0.08]
.031
[0.79]
.062
[1.57]
.125±.010
[3.18±0.25]
.031±.001
[0.79±0.03] T
yp. .063±.002
[1.60±0.05]
.125
[3.18]
.035
[0.89]
.085
[2.16 ] Max.
.040-.015
[1.02±0.38]
+.000
+0.00 Typ.
Keyway Locations
(Ref only)
296
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
7
Mod I Headers, Straight Post, Keyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Note: All part numbers are RoHS compliant.
Mod I Headers
No. of Dimensions No. of Post Height Post Height Post Height
Keying D=.750 [19.05] D=1.187 [30.15] D=1.310 [33.27] Keyway
Pos. AB C
Slots Plating A Plating B Plating A Plating B Plating A Plating B
Locations
21.156 [3.96] .267 [6.78] 1 85923-2 5-85875-7 87283-2 — 85839-2 5-85840-2 A
32.312 [7.92] .423 [10.74] 1 85923-3 5-85875-8 87283-3 5-86207-2 85839-3 5-85840-3 A
43.468 [11.89] .579 [14.71] 2 85923-4 5-85875-1 87283-4 5-86207-9 85839-4 5-85840-4 A,C
54.624 [15.85] .735 [18.67] 2 85923-5 5-85875-2 87283-5 5-86207-3 85839-5 5-85840-5 A,D
65.780 [19.81] .891 [22.63] 3 85923-6 5-85875-9 87283-6 — 85839-6 5-85840-6 A,C,E
76.936 [23.77] 1.047 [26.59] 3 85923-7 6-85875-0 87283-7 — 85839-7 5-85840-7 A,C,E,
871.092 [27.74] 1.203 [30.56] 4 85923-8 6-85875-1 87283-8 — 85839-8 5-85840-8 A,C,E,G
981.248 [31.70] 1.359 [34.52] 3 85923-9 5-85875-3 87283-9 — 85839-9 5-85840-9 A,D,G
10 9 1.404 [35.66] 1.515 [38.48] 5 1-85923-0 6-85875-2 1-87283-0 — 1-85839-0 6-85840-0 A,C,E,G,J
11 10 1.560 [39.62] 1.671 [42.44] 4 1-85923-1 6-85875-3 1-87283-1 — 1-85839-1 6-85840-1 A,D,G,K
12 11 1.716 [43.59] 1.827 [46.41] 6 1-85923-2 5-85875-4 1-87283-2 — 1-85839-2 6-85840-2 A,C,E,G,J,L
13 12 1.872 [47.55] 1.983 [50.37] 4 1-85923-3 6-85875-4 1-87283-3 — 1-85839-3 6-85840-3 A,D,J,M
14 13 2.028 [51.51] 2.139 [54.33] 7 1-85923-4 6-85875-5 1-87283-4 — 1-85839-4 6-85840-4 A,C,E,G,J,L,N
15 14 2.184 [55.47] 2.295 [58.29] 5 1-85923-5 6-85875-6 1-87283-5 — 1-85839-5 6-85840-5 A,D,G,K,N
16 15 2.340 [59.44] 2.451 [62.26] 8 1-85923-6 6-85875-7 1-87283-6 — 1-85839-6 6-85840-6 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.607 [66.22] 6 1-85923-7 6-85875-8 1-87283-7 — 1-85839-7 6-85840-7 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-85923-8 6-85875-9 1-87283-8 — 1-85839-8 6-85840-8 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-85923-9 7-85875-0 1-87283-9 — 1-85839-9 6-85840-9 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.075 [78.11] 10 2-85923-0 7-85875-1 2-87283-0 — 2-85839-0 7-85840-0 A,C,E,G,J,L,N,Q,S,U
21 20 3.120 [79.25] 3.231 [82.07] 7 2-85923-1 7-85875-2 2-87283-1 — 2-85839-1 7-85840-1 A,D,G,K,N,R,U
22 21 3.276 [83.21] 3.387 [86.03] 11 2-85923-2 7-85875-3 2-87283-2 — 2-85839-2 7-85840-2 A,C,E,G,J,L,N,Q,S,U,W
23 22 3.432 [87.17] 3.543 [89.99] 8 2-85923-3 5-85875-5 2-87283-3 — 2-85839-3 7-85840-3 A,D,G,K,N,R,U,X
24 23 3.588 [91.14] 3.699 [93.95] 12 2-85923-4 7-85875-4 2-87283-4 — 2-85839-4 7-85840-4 A,C,E,G,J,L,N,Q,S,U,W,Y
25 24 3.744 [95.10] 3.855 [97.92] 11 2-85923-5 7-85875-5 2-87283-5 — 2-85839-5 7-85840-5 A,C,E,H,K,M,Q,S,U,W,Y
AMPMODU Interconnection System
297
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Mod I Headers, Right-Angle Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Mod I Headers
No. of Dimensions No. of Post Height Post Height
Keyway
Pos. AB C
Keying D=.345 [8.76] D=.500 [12.70] Locations
Slots Plating A Plating C Plating B Plating C
21.156 [3.96] .267 [6.78] 1 87654-2 5-87655-2 87258-2 5-87194-1 A
32.312 [7.92] .423 [10.74] 1 87654-3 5-87655-3 87258-3 5-87194-2 A
43.468 [11.89] .579 [14.71] 2 87654-4 5-87655-4 87258-4 5-87194-3 A,C
54.624 [15.85] .735 [18.67] 2 87654-5 5-87655-5 87258-5 5-87194-4 A,D
65.780 [19.81] .891 [22.63] 3 87654-6 5-87655-6 87258-6 5-87194-5 A,C,E
76.936 [23.77] 1.047 [26.59] 3 87654-7 5-87655-7 87258-7 5-87194-6 A,C,E
871.092 [27.74] 1.203 [30.56] 4 87654-8 5-87655-8 87258-8 5-87194-7 A,C,E,G
981.248 [31.70] 1.359 [34.52] 3 87654-9 5-87655-9 87258-9 5-87194-8 A,D,G
10 9 1.404 [35.66] 1.515 [38.48] 5 1-87654-0 6-87655-0 1-87258-0 5-87194-9 A,C,E,G,J
11 10 1.560 [39.62] 1.671 [42.44] 4 1-87654-1 6-87655-1 1-87258-1 6-87194-0 A,D,G,K
12 11 1.716 [43.59] 1.827 [46.41] 6 1-87654-2 6-87655-2 1-87258-2 6-87194-1 A,C,E,G,J,L
13 12 1.872 [47.55] 1.983 [50.37] 4 1-87654-3 6-87655-3 1-87258-3 6-87194-2 A,D,J,M
14 13 2.028 [51.51] 2.139 [54.33] 7 1-87654-4 6-87655-4 1-87258-4 6-87194-3 A,C,E,G,J,L,N,
15 14 2.184 [55.47] 2.295 [58.29] 5 1-87654-5 6-87655-5 1-87258-5 6-87194-4 A,D,G,K,N
16 15 2.340 [59.44] 2.451 [62.26] 8 1-87654-6 6-87655-6 1-87258-6 6-87194-5 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.607 [66.22] 6 1-87654-7 6-87655-7 1-87258-7 6-87194-6 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-87654-8 6-87655-8 1-87258-8 6-87194-7 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-87654-9 6-87655-9 1-87258-9 6-87194-8 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.075 [78.11] 10 2-87654-0 7-87655-0 2-87258-0 6-87194-9 A,C,E,G,J,L,N,Q,S,U
21 20 3.120 [79.25] 3.231 [82.07] 7 2-87654-1 7-87655-1 2-87258-1 7-87194-0 A,D,G,K,N,R,U
22 21 3.276 [83.21] 3.387 [86.03] 11 2-87654-2 7-87655-2 2-87258-2 7-87194-1 A,C,E,G,J,L,N,Q,S,U,W
23 22 3.432 [87.17] 3.543 [89.99] 8 2-87654-3 7-87655-3 2-87258-3 7-87194-2 A,D,G,K,N,R,U,X
24 23 3.588 [91.14] 3.699 [93.95] 12 2-87654-4 7-87655-4 2-87258-4 7-87194-3 A,C,E,G,J,L,N,Q,S,U,W,Y
25 24 3.744 [95.10] 3.855 [97.92] 11 2-87654-5 7-87655-5 2-87258-5 7-87194-4 A,C,E,H,K,M,Q,S,U,W,Y
Single Row, .156 [3.96]
Centers
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — .000015 [0.00038] gold
over .000050 [0.00127] nickel on entire
post
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts and
Housings — pages 298 & 299 (see
page 298 for recommended post length).
Performance Specifications —
page 305
Technical Documents —
page 305
E Dimension
.345 [8.76] Post Height —
.250 [6.35] for mounting header flush
with board edge; .595 [15.11] for
supporting mating connector on board.
.500 [12.70] Post Height —
.250 [6.35] for mounting header flush
with board edge; .750 [19.05] for
supporting mating connector on board.
Recommended Board Layout
.312±.003
[7.92±0.08] .156±.003
[3.96±0.08]
E
.078±.002
[1.98±0.05]
Dia.
Keyway Locations
(Ref Only)
C
.031±.001
[0.79±0.03] T
yp.
.040-.015
2 Plc.
[1.02-0.38]
.031
[0.79]
See Table
for Locations
.131
[3.33]
.125
[3.18]
.125±.010
[3.18±0.25]
.250±.010
[6.35±0.25]
.062±.001
[1.57±0.03]
.345±.010
[8.76±0.25]
.275±.015
[6.99±0.38]
A Spaces @ 1.56 = B
[3.96]
.100
[2.54] Typ. Keyway
+.000
+0.00
298
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Locking Clip Contacts for .031 x .062 [0.79 x 1.57] Posts,
.031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS compliant.
Locking Clip Contacts
Wire Harnessing
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing. For
more information, request
Insulating and Bundling
Products Catalog 124132.
Wire Crimp Contacts with
Insulation Support
Material and Finish
Contact Body — Phosphor bronze,
plated as follows:
Plating A — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — .000100 [0.00254] min.
tin over .000050 [0.00127] nickel on
entire contact
Contact Spring — Stainless steel
Related Product Data
Mate with —
Machine Applied Posts — page 294
Headers (.500 Post Height Only) —
pages 295-297 (see recommended post
length below)*
Housings used in — page 299
Application Tooling —
pages 300-304
Performance Specification — page
305
Technical Documents —
page 305
Extraction Tool
Part No. 91104-1
Instruction Sheet
408-7678
Wire Size Ins. Dia. Contact Part Nos.
Range Range Finish Strip Form Loose Piece
AWG [mm2]
22-18 [0.3-0.9] .050-.0100 [1.27–2.54] Plating A 87269-2 87278-2
Plating B 5-87269-1 5-87278-1
Wire Size Applicator Premium
Range Part Used With CERTI-CRIMP
AWG [mm2]Number Type Machine Hand Tool
Part Number
22-18 [0.3-0.9] 466007-2 HDM Model "K" (AMP-O-LECTRIC)1
90308-1
466950-2 SCA Stripper/Crimper (AMP-O-MATIC)
Cable
Tie
Fixed
Clamp
Mating Post
Spring
Body
Unrestricted
Wire for
Free-Floating
Contacts
1AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines. Consult TE.
Note: These contacts must be crimped in accordance with TE Specification No. 114-25008 in order to function
properly in a connector housing.
Extraction Tool Part No. 91104-1 is used for removing individual contacts from connector housings and for detaching
contacts from mating posts.
*Dimension defines .031 x .062 [0.79 x 1.57] portion of post.
If post is longer than maximum specified, post tip may butt against wire ends.
.281/.344* [7.14/8.74]
(without housing)
.370/.433* [9.40/11.00]
(with housing)
299
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Locking Clip Connector Housings, .031 x .062 [0.79 x 1.57] Centerline
Note: All part numbers are RoHS
compliant.
Locking Clip
Connector Housing
No. of Dimensions Housing Part Nos. Keyed Positions
Pos. ABC UnKeyed Keyed on Mating Face
1——.200 [5.08] 87270-1 ——
2——.376 [9.55] 87270-2 ——
3.156 [3.96] .156 [3.96] .532 [13.51] 1-87270-3 ——
3 of 4 .156 [3.96] .312 [7.92] .688 [17.48] — 87270-3 ■ ■ ■■
4 87270-4 ——
4 of 5 .312 [7.92] .312 [7.92] .844 [21.44] — 1-87270-0 ■■■■■
5 1-87270-4 ——
5 of 6 .312 [7.92] .468 [11.89] 1.000 [25.40] — 1-87270-2 ■ ■ ■ ■ ■■
6 87270-5 ——
6 of 7 .468 [11.89] .468 [11.89] 1.156 [29.36] — 1-87270-1 ■ ■ ■ ■ ■■ ■
7 1-87270-5 ——
8.468 [11.89] .624 [15.85] 1.312 [33.32] 87270-6 ——
9.624 [15.85] .624 [15.85] 1.468 [37.29] 1-87270-6 ——
10 .624 [15.85] .780 [19.81] 1.624 [41.25] 87270-7 ——
11 .780 [19.81] .780 [19.81] 1.780 [45.21] 1-87270-7 ——
12 .780 [19.81] .936 [23.77] 1.936 [49.17] 87270-8 ——
■Indicates "closed cavity". No post entry hole in this position.
Notes: 1. All housings listed above will accept Locking Clip Contacts No. 87269 and 87278, refer to page 298
2. Refer to TE Instruction Sheet 408-7676 for proper contact orientation within the housings.
Single Row, .156 [3.96]
Centers
Material and Finish
Black thermoplastic, 94V-0 rated
Related Product Data
Contacts used with — page 298
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297 (see page
298 for recommended post length)
Performance Specifications —
page 305
Technical Documents —
page 305
C
A B
.860
[21.84]
.220
[5.59]
.060
[1.52]
.031 x .062
[0.79 x 1.57]
Post
(Ref only)
.433/.370
[11.00/9.40]
.194
[4.93]
.110
[2.79]
Typ.
.156
[3.96]
Typ.
.110
[2.79] Min.
T
yp.
300
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Application Tooling
Note: All part numbers are RoHS
compliant.
Application Tooling
For Crimp Snap-In
Receptacles and Locking
Clip Contacts
Note: For additional tooling options, contact TE or reference the TE web site.
Side-Feed Heavy-Duty
Miniature Applicators
(Coded HDM)
Interchangeable applicators
for crimping products reeled
side-by-side on single or
dual carrier strips (primarily
closed-barrel terminals and
open-barrel contacts).
Similar design as the end-
feed version. All side-feed
applicators include a wire
stop to help correctly
position the wire end in the
crimping target area.
For more information, request
Instruction Sheet 408-8040.
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
Semiautomatic bench
machines for crimping
reeled terminals and
contacts, featuring a quiet
and reliable direct motor
drive, microprocessor
controls for ease of setup
and operation, and guarding
and lighting designed for
operator convenience and
safety. All models are
equipped with either manual
or automatic precision
adjustment of crimp height.
Machine-mounted sensors
are available for crimp
quality monitoring using
conventional miniature-style
applicators.
Specifications
Width — 18.7-25.3 [475-643]
depending on applicator type
Depth — 21.5-28.1 [546-713]
depending on applicator type
Height — 20 [508]
Weight — 240 lb [110 kg]
Electrical — 120 or 220 VAC, 50
or 60 Hz; 310 VA
Air — 90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m3/s] when
required with air-feed applicators
Wire Range — 26-10 AWG
[0.12-6 mm2] solid or stranded,
depending on product applied
For more information, request
Catalog 65828, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2, 1213400-1, -2
Fully-automatic machines
that measure, cut, strip and
terminate single leads.
Microprocessor-controlled,
and programmed and
operated using an easy-to-
follow, menu-driven
touchscreen. Features
include direct-drive
terminating units with
precision crimp height
adjustment, fully
programmable setups, wire
runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
quality monitoring is also
available.
Specifications
Width — 159 [4 040]
Depth — 68 [1 730]
Height — 86 [2 185] with
24 [610] dia. reel
Weight — 2 000 lb [907 kg]
Electrical — 220 VAC, 50 or
60 Hz, single phase, 25 A, with
neutral and ground
Air — 90 psi [6.21 bar], 15 scfm
[0.0071 m3/s] sustained
Wire Range — 26-10 AWG
[0.12-6 mm2] stranded, 26-16 AWG
[0.12-1.4 mm2] solid
Lead Lengths — 3-90
[76.2-2 285], 90-1 000
[2 285-25 400] with long lead
conveyors
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
301
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Application Tooling (Continued)
Application Tooling
Stripper-Crimper
Applicators (coded SCA)
Interchangeable applicators
for crimping products in
AMP-O-MATIC Stripper-
Crimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
For more information, request
Catalog 65004 (AMP-O-MATIC
Stripper-Crimper Machines),
Catalog 82275 [Crimp Quality
Monitor (CQM)].
Kappa 235, Automatic Cut
and Strip, 3-547178-1
The Kappa 235 has the
capability of processing
wires with a cross section of
up to 4 AWG and an outside
diameter of 0.59 inch.
Options include an inner
conductor processing kit for
multiconductor cables and
a flat ribbon cable kit.
Specifications
Width—25 [630]
Depth—16 [490]
Height—13.4 [370]
Weight—95 lb [44 kg]
Wire Cross-Sections—
24-4 AWG [0.22-25 mm2]
Flat Ribbon Cables—width up
to 40mm
Length Range—0.04”-328ft
[1mm - 99.99m] (+/- 0.2%)
Electrical—110/230 V -
50/60Hz, switches automatically
AMP-O-MATIC Stripper-
Crimper Machines,
854040-3, -4
Semiautomatic bench
crimping machines that also
strip the wire, and are
therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and
an efficient scrap removal
system. All adjustments can
be made from the front of
the machines without
special tools. Available with
crimp quality monitoring.
Specifications
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or
60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar],
3.5 scfm [0.00165 m3/s]
Wire Range—32-14 AWG
[0.03-2 mm2]
For more information, request
Catalog 65004, Video 198075,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
Cosmic 927R
Micro-Cable Stripper
The Cosmic 927R
Micro-Cable Stripper was
developed to reliably strip
various insulation materials
and micro-cable. From
conductor diameter 36 AWG
to 10 AWG, the stripping
diameter display can be set
to within 0.1mm increments.
Thus optimal stripping
quality is guaranteed and
damage to the conductor is
eliminated.
Note: All part numbers are RoHS
compliant. Note: For additional tooling options, contact TE or reference the TE web site.
302
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Application Tooling (Continued)
Application Tooling
Note: For additional tooling options, contact TE or reference the TE web site.
All CERTI-CRIMP head
assemblies / dies, have
multiple power options
available. The
accompanying diagram
outlines those power
options. See catalogs
1654714 (SDE Electric
Terminator), 124208 (626
Pneumatic Tool System) and
1773381(Battery-Powered
Crimp Tool Kits) for more
information.
For more information, request
Catalog 65780.
CERTI-CRIMP Straight
Action Hand Tools (SAHT)
Premium grade hand tools.
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a
contact locator and wire
stop, plus an insulation
crimp adjustment lever,
when applicable.
Approximate weight 1.3 lb
[0.59 kg]
All PRO-CRIMPER head
assemblies / dies, have
multiple power options
available. The
accompanying diagram
outlines those power
options. See catalogs
1654714 (SDE Electric
Terminator), 124208 (626
Pneumatic Tool System) and
1773381(Battery-Powered
Crimp Tool Kits) for more
information.
Instruction Sheet
408-9930
PRO-CRIMPER III
Hand Tool
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shouldered-
style die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and
to help minimize contact
rotation and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
303
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Application Tooling (Continued)
Application Tooling
Note: All part numbers are RoHS
compliant. Note: For additional tooling options, contact TE or reference the TE web site.
For Board Mount
Receptacles and Machine
Applied Posts
Bench machines for insert-
ing a variety of products
into pc boards. Uses the
same interchangeable
insertion heads as the
Comp-U-Sertor II Machines.
Series 217600 machines
feature a manually-operated
X-Y positioning fixture, plus
a locator spotlight. The
machine cycles when the
board hole is placed on the
anvil and both triggers on
the dual handles attached
to the X-Y fixture are
depressed. Series 662820
machines, without board
fixturing, cycle automatically
when the hole is properly
located. A stabilizing disk
over the anvil helps keep
the board level.
This benchtop insertion
machine installs contacts
into PC boards at rates to
2000 per hour. A spotlight
highlights the insertion area,
and lower tooling assures
precise board location.
The machine is activated
by a foot pedal.
Specifications
Width — 18 [457]
Depth — 24 [610]
Height — 18 [457]
Weight — 250 lb [113 kg]
Electrical — 120 to 220 VAC,
50 or 60 Hz (217600); 120 or
240 VAC, 60 Hz, single phase,
120 VA (662820)
Air — 80 psi [5.52 bar] min.,
15 scfm [0.00708 m3/s] min.
Insertable Area — 18 x 22
[457 x 559] max.
For more information, request
Catalog 296059.
Modular Insertion System
(MIS) Bench Machines,
217600 Series,
662820 Series (shown)
For Board Mount Receptacles
Automatic machine for
inserting a variety of con-
tacts into pc boards (PCBs).
Equipped with an insertion
tool (comprised of a prod-
uct-specific insertion head,
an anvil, and a product feed
mechanism). Stepper-motor
driven X-Y table positions
PCBs under insertion head.
Surface Mount Equipment
Manufacturers Association
(SMEMA) compatible inline
PCB Insertion Station for
posts, tabs, receptacles or
sockets. Stand-alone unit is
field upgradeable to Pass
Through. Mounts up to four
TE pneumatic insertion
heads. Modem diagnostics
standard, vision system
optional. Control panel used
to program and monitor
entire insertion process.
Specifications
Width — 57.5 [1 460]
Depth — 64.5 [1 640]
Height — 60 [1 520]
Weight — Depending on
configuration
Electrical — 110 V, 60 Hz
Air — 87 psi [6 bar]
Insertable Area — 24 x 16
[600 x 400]
For more information, contact TE.
P300 Automatic Insertion
Machine
304
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Application Tooling (Continued)
Application Tooling
For Board Mount
Receptacles and Machine
Applied Posts (Continued)
P350 Pin Insertion Machine
The P350 is a fully
automatic inline pin
insertion machine capable
of applying reeled pins,
tabs, receptacles and
similar products into PCBs.
With inline operation, an
automatic tool changer and
insertion rates up to 5 per
second, it is focused at fully
automatic high speed
operation to maximize
throughput while minimizing
costly scrap.
A servo powered XY table
positions the PCB under a
central drive station at high
speed. The tool changer
can hold up to 3 insertion
heads each capable of
applying a different product.
A unique rotary insertion
finger allows the application
of products at up to 7
different angles without
rotating the PCB. This
allows the P350 to apply
product at different angles
without a reduction in
insertion rate or the
potential positioning error
associated with PCB
rotation. Icon driven
software with touch screen
provides a simple to use,
intuitive operator interface.
The P350 provides a wide
range of solutions for pin
insertion applications.
Quick change tooling
packs, and a wide range of
options make it a flexible
high speed platform.
Specifications
Width — 102 [2600]
Depth — 118 [3000]
Height — 87 [2200]
Weight — approx 3500 lb
[1600 kg]
Electrical — 230 V, 50-60 Hz,
10 A
Air — 600 kPa dried air
Max. Board Size — 17.5 x 17.5
[450 x 450]
305
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
7
Performance Specifications
Note: All part numbers are RoHS compliant.
Product Specifications
Mechanical Characteristics
Contact Durability
Receptacles Locking
Plating Standard High Clip
Pressure Pressure Contacts
.000016 [0.00041] Min. Tin 75 Cycles 25 Cycles N/A
.000079 [0.00201] Min. Tin 75 Cycles 25 Cycles N/A
.000100 [0.00254] Min. Tin N/A N/A 25 Cycles
.000015 [0.00038] Gold 75 Cycles 50 Cycles 25 Cycles
.000030 [0.00076] Gold 200 Cycles 100 Cycles N/A
Connector Durability
Receptacles
Mating – 16 oz. [4.45N] max. per contact after 3 mating cycles
(standard pressure)
–30 oz. [8.34N] max. per contact after 3 mating cycles
(high pressure, gold)
–60 oz. [16.68N] max. per contact after 3 mating cycles (high pressure, tin)
Unmating – 1 oz. [0.28N] min. per contact after 3 mating cycles (standard pressure)
3 oz. [0.83N] min. per contact after 3 mating cycles (high pressure)
Locking Clip Contacts
Mating – 4 lb. [17.79N] max. per contact after 3 mating cycles
Unmating – 2 lb. [8.90N] min. per contact after 3 mating cycles
Environmental Characteristics
Operating Temperature — -65°C to 105°C [-85°F to 221°F] (Gold Plated)
-65°C to 60°C [-85°F to 140°F] (Tin Plated)
The electrical, mechanical
and environmental charac-
teristics of the AMPMODU
.031 x .062 [0.79 x 1.57]
Interconnection System are
listed below:
Electrical Characteristics
Contact Current Rating —
5 amperes max. for single contact in free
air, could vary due to ambient tempera-
ture, wire size and duty cycles.
Contact Resistance —
12 milliohms at 100 ma and 50 mv open
circuit.
Dielectric Rating —
At Sea Level – 1200 VAC between con-
tacts on .156 [3.96] centers for 1 minute.
Insulation Resistance — 5 x 103
megohms (initial)
Various technical docu-
ments are available for your
use:
Product Specifications
describe technical perform-
ance characteristics and
verification tests. They are
intended for the Design,
Component and Quality
Engineer.
108-25016 Interconnection System,
Standard Pressure
108-25025 Interconnection System,
High Pressure, Gold
108-25025-1 Interconnection System,
High Pressure, Tin
108-36029 Locking Clip Connectors
Application Specifications
describe requirements for
using the product in its
intended application and/or
crimping information.
They are intended for the
Packaging and Design
Engineer and the Machine
Setup Person.
114-25000 Crimp Snap-In Receptacle
Contacts
114-25004 Board Mount Receptacle
Contacts
114-25008 Locking Clip Contacts
114-25011 Machine Applied Straight
Posts
Instruction Sheets provide
instructions for assembling
or applying the product.
They are intended for the
Manufacturing Assembler or
Operator.
408-7308 Clinching Procedures for
Header Assemblies
408-7411 Suggestions for Wave
Soldering AMPMODU
Receptacles
408-7594 TE Hand Tool 90274-2 for
Crimping Crimp Snap-In
18-22 AWG Contacts
408-7750 TE Hand Tool 90328-1 for
Crimping Crimp Snap-In
Contacts (22-26 AWG)
408-7676 AMPMODU Locking Clip
Connectors and Contacts
408-7671 TE Hand Tool 90308-1 for
Crimping Locking Clip
Contacts
408-7678 TE Extraction Tool 91104-1
for Locking Clip Contacts
408-7981 Clinching Procedures for
Receptacle Assemblies
408-9451 TE Extraction Tool
843473-1 for Crimp
Snap-In Receptacles
Technical Documents
306
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
8
Shunts
Shunts
TE offers a variety of high
quality shunts for low cost
manual programming. TE
7600 Series Programmable
Shunts are designed on
the standard .100 x .300
[2.54 x 7.62] DIP spacing.
TE DIP Shunts are a highly
reliable, low cost means of
manually programming
various types of
electrical/electronic
equipment. The shunt
consists of a series of
conductive straps packaged
in a DIP configuration. The
straps can be retained intact
for a closed circuit or broken
with a hand tool to produce
an open circuit.
TE Post Shunts mate with
any common pairs of
square, rectangular and
round posts. Post shunts
come
in two-position low profile,
2 mm miniature, tandem
spring, dual beam, and
multiposition versions.
Among the options
available are choices of
gold or tin plating, beryllium
copper or phosphor bronze
contact material and shunts
with 94V-0 rated housing
spaces on .079 [2.00],
.100 [2.54] and .200 [5.08]
centers with the low profile
series requiring only .250
[6.35] clearance from the
pc board.
All TE shunts feature one-
piece construction for high
reliability. All have high
normal forces for excellent
electrical continuity. For
added reliability, Tandem
Spring and Dual Beam
Shunts have two points of
contact in each receptacle.
Product Facts
■7600 Series Programmable
Shunts use conventional
.100 x .300 [2.54x7.62] DIP
leg spacing
■Post Shunts are used to
common pairs of .025 [0.64]
square posts, .025 [0.64]
diameter round posts and
.022 x .026 [0.56 x 0.66]
formed posts
307
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
8
Shunts
Dual In-Line Package (DIP) Shunts — 7600 Series
Note: All part numbers are RoHS compliant.
Standard Shunt
Standard Pressure
Material and Finish
Housing — Glass-filled polyester, UL
94V-0 rated
Contacts — Brass
Finish — Selectively plated .000100
min. tin on solder area over .000050
min. nickel on entire contact
Contact Lead Spacing —
.100 x .300 [2.54x7.62]
Lead Length — .140 [3.56] below
mounting surface
Housing Color — Black
Programming Tool — See below
Programming Hand Tool
Part No. 435862-1
This tool provides a reliable means of
programming DIP shunts. It is rugged,
light-weight and dependable. No special
skills are required to use this tool.
.290
[7.37]
15° Max.
Ty p .
.079
[2.01]
41582B IL p.17A
.300
[7.62 ]
± .005
± 0.13
.100
[2.54 ]
± .005
± 0.13
.035
[0.89 ]
± .005
± 0.13
41582B IL p.17B
Ty p . Dia. Typ.
No. of Dimension A Standard Shunt
Pos. inch mm Standard Pressure
4 .400 10.16 1825190-4
6 .600 15.24 1825190-6
7 .700 17.78 1825190-7
8 .800 20.32 1825190-8
9 .900 22.86 1825190-9
10 1.000 25.40 1-1825190-0
12 1.200 30.48 1-1825190-2
308
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
8
Post Shunts
Note: All part numbers are RoHS compliant.
Shunts
Part Numbers
Configuration Housing Gold Plate1Gold Plate1Tin Plate
Color .000015 .000030 .000100
[0.00038] [0.00076] [0.00254]
Strip of 10 Black 531230-2 531230-3 531230-1
1In contact area
Product Facts
■One-piece contact
construction
■High normal forces
■94V-0 rated housings
■Gold inlay, gold plate or tin
plate over nickel
■Stackable
■Those post shunts indicated
are recognized under the
component program of
Underwriters
Laboratories Inc.,
File No. E28476
and certified by the
Canadian Standards
Association
File No. LR 7189
Tandem Spring Shunts
■Two points of contact
provide extra reliability
■Shunts accept posts as
short as .175 [4.45]; posts
bottom at .330 [8.38]
2mm Mini Shunts
■Stackable on 2mm contact
centerline
■Low profile
■Available in strips of 10
Material and Finish —
Low Profile and 2mm Shunts
Housing — Glass-filled thermoplastic,
black, UL 94V-0 rated
Contacts — Beryllium copper or
phosphor bronze, plated .000050
[0.00127] nickel underplate with gold
plate in contact area or tin overall
Material and Finish —
Tandem Spring Shunts
Housing — Nylon, UL 94V-0 rated
Contacts — Phosphor Bronze
Finish — .000030 [0.00076] nickel
underplate with gold inlay in the contact
area or tin overall
Standard Housing Shunt
.200 [5.08] Centerline
Part Numbers
Configuration Housing Gold Plate1Gold Flash1Tin Plate Gold Plate
Color .000015 .000005 .000100 .000030
[0.00038] [0.00013] [0.00254] [0.00076]
Strip of 10 Blue 382811-2 ———
Strip of 10 Black 382811-6 382811-8 382811-5 2-382811-0
Strip of 10 Red 382811-9 ———
Loose Piece Black 1-382811-6 1-382811-8 ——
1In contact area
2.498
[63.45]
3.453
[87.70]
R
R
R
R
2-Position, Low Profile Shunts
Economy Shunt
.100 [2.54] Centerline
309
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
8
Post Shunts (Continued)
Note: All part numbers are RoHS
compliant.
Shunts
Part Numbers
Configuration Housing Gold Plate1Gold Plate1
Color .000015 .000030
[0.00038] [0.00076]
Strip of 10 Black 382575-2 382575-3
1In contact area
2-Position,
Low Profile Shunts (Novo)
(Continued)
Handle Shunt
.100 [2.54] Centerline
2 mm Mini-Shunt
.079 [2.00] Centerline
Dual Beam Shunt
Loose Piece Part Numbers
Housing Gold Plate1Gold Plate1Gold Plate1Tin Plate Type
Color .000015 .000030 .000050 .000100
[0.00038] [0.00076] [0.00127] [0.00254]
Black 881545-1 881545-2 881545-3 4-881545-2 Open Top
Black 880584-1 880584-2 880584-3 880584-4 Closed Top
1In contact area
Part Numbers
Configuration Housing Gold Plate1Gold Plate1Type
Color .000015 .000030
[0.00038] [0.00076]
Strip of 10 Black 390088-2 390088-1 Open Top
Strip of 10 Blue 390088-4 390088-3 Open Top
Strip of 10 Yellow — 390088-5 Open Top
1In contact area
.096
[2.44]
2.500
[63.5]
Ref.
.196
[4.98]
Ref.
.247
[6.27]
Ref.
R
R
310
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
8
Post Shunts (Continued)
Note: All part numbers are RoHS compliant.
Shunts
Tandem Spring Shunt
.100 [2.54] Centerline
Multiposition Shunts
for.025 [0.64] Square Posts
.200 [5.08] Centerline
Part Numbers
Housing Gold Inlay1TinPlate
Color .000030 .000100
[0.00076] [0.00254]
Black 530153-2 4-530153-1
1In contact area
Housing — Glass-filled polyester
Contacts — Beryllium Copper
Finish — .000030 [.00076] gold in
contact area over .000050 [.00127]
nickel on entire contact
Current Rating — 2.5 amps
Dimension A Housing Part
Size inch mm Color Number
2x2 .246 6.25 Black 390102-1
2x2 .246 6.25 Red 390102-3
2x3 .396 10.01 Black 390102-2
.250
[6.35]
MAX
.048
[1.22]
REF
.150
[3.81]
REF
A
.550
[13.97]
.300
[7.62]
MAX
.200
[5.08]
R
R
R
R
311
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
8
Performance Specifications
Shunts
Dual In-Line Package (DIP) Shunts — 7600 Series
Current Rating —
Standard pressure — 2 amperes for +20˚C rise above ambient (one conductor per shunt
Machine insertable — 1 ampere for +20˚C rise above ambient (one conductor per shunt)
Insulation Resistance — 1x 1010ohms min. at 100 VDC
Dielectric Withstanding Voltage — 500 VDC min.
Capacitance — 2 picofarads max. between adjacent straps
Temperature Rating — -55˚C to +105˚C
Terminal Strength (Bend Test) — Two 45˚ bend cycles per MIL-STD-202, Method 211, Condition B
Solder Bridging —
Cut straps can be reconnected by solder bridging. Solder bridging recommendations are:
•Use low temperature solder (60/40 tin/lead)
•Use solder tip approximately 1/32 [0.79] in diameter
•Do not let solder tip come in contact with plastic material
Post Shunts
Current Rating —
3 amperes max. unless otherwise noted
Temperature Rating — -65˚C to +105˚C (gold) -40˚C to +85˚C (tin)
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-7533 Dual In-Line Package (DIP) Shunts
108-1445 2mm Mini Shunt
108-1476 Economy Shunt, Multiposition Shunt
108-1674 Dual Beam Shunt
108-9057 Low Profile Shunt
108-9062 Tandem Spring Shunt
108-37006 Novo Shunt with Handle
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1045 Tandem Spring Shunt
114-1054 Dual In-Line Package (DIP) Shunts
114-1059 Economy Shunt, Dual Beam Shunt, Low Profile Shunt, Multiposition
Shunt
114-1074 2mm Mini Shunt
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-7768 Dual In-Line Package (DIP) Shunts
408-3208 Tandem Spring Shunt
408-3230 Economy Shunt, Dual Beam Shunt, Low Profile Shunt
408-3251 Multiposition Shunt
408-3276 2mm Mini Shunt
AMPMODU Interconnection System
312
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Engineering Notes
8
313
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
Part Number Index
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No. Page
102104 290
102106 290
102107 211
102114 203
102128 210, 213
102185 255, 258, 259
102198 139, 140
102202 115, 210
102203 85, 116
102241 210, 215
102312 258, 259
102316 213
102338 203
102348 211
102387 210, 220
102393 256
102394 256
102395 265
102396 255, 259
102398 255, 256
102399 265
102448 256
102449 265
102523 116
102536 255, 259
102537 255, 259
102540 255, 259
102541 255, 259
102548 213
102557 149
102567 198
102570 124, 125
102589 193, 200
102617 122, 123
102618 117, 118
102619 119, 120
102620 127
102641 265
102642 265
102666 199
102681 255, 259
102690 193, 199
102691 199
102692 198
102693 257
102694 257
102695 257
102699 85, 148
102742 177
102766 142
102777 199
102783 262, 263
102784 262, 263
102785 262, 263
102786 262, 263
102787 262, 263
102788 262, 263
102789 263
102791 264
102792 264
102802 200
102823 259
Part No. Page
87227 85, 96, 97
87230 85, 98, 99
87232 85, 94, 95, 210, 221
87233 94, 95
87247 295
87258 297
87262 295
87269 298
87270 299
87278 298
87283 296
87309 213
87316 286
87456 210, 216
87474 129
87483 210
87496 133
87499 210, 214
87523 213
87568 127
87572 126
87577 124, 125
87579 122, 123
87587 119, 120
87589 117, 118
87605 85, 131
87608 130
87623 163
87631 210, 218, 219
87654 297
87655 297
87666 213
87667 213
87710 218
87733 219
87743 204
87756 210, 213
87772 286
87774 286
87809 213
87878 163
87879 85, 177
87921 218
87922 218, 219
87977 210, 217
87983 287
87984 287
87985 287
87986 287
87987 289
87988 289
87989 287
87990 287
87993 287
87995 289
102055 126
102090 292
102095 211
102099 290
102100 290
102102 290
102103 290
Part No. Page
19156 139, 140
57013 58
57038 58
57118 58
57119 58
57131 58, 59
57138 58
57139 58
57144 58
57145 58
57288 58
57289 58
57290 58
85487 286
85493 286
85829 295
85839 296
85840 296
85875 296
85923 296
85969 213
86016 213
86147 294
86177 216
86181 285, 287, 288
86182 294
86207 296
86286 169, 172, 175-177,
180, 182, 189, 191,
195-197, 214-218, 220,
256, 257
86432 286
86434 286
86477 286
86479 98, 99
86480 286
86492 213
87003 286
87022 163
87025 291
87046 213
87077 214-218, 220,
256, 257
87105 286
87107 211
87116 293
87124 207
87131 209
87132 209
87133 209
87159 293
87160 295
87165 207
87175 208
87176 209
87179 208, 209
87190 207
87191 207
87194 297
87195 213
87215 96, 97
87220 85, 93
87224 93
314
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
Part Number Index
Part Number Index (Continued)
314
Part No. Page
104895 19
104905 208
104909 245
104910 245
104935 247
111196 56
146079 163
146128 109
146129 109
146130 110
146131 110
146132 86, 109
146133 109
146134 86, 110
146135 110
146138 178
146205 202
146250 104, 107
146252 104, 107
146253 104, 107
146254 104, 107
146256 104, 107
146257 85, 104, 107
146258 104
146260 104
146261 104
146262 104
146264 104
146265 104
146266 104
146268 85, 104
146269 104
146270 104
146272 104
146273 104
146274 102, 107
146276 102, 107
146277 102, 107
146278 102, 107
146280 102, 107
146281 85, 102, 107
146282 102
146284 102
146285 102
146286 102
146288 102
146289 102
146290 102
146292 102
146293 85, 102
146294 102
146296 102
146297 102
146304 85, 103
146305 103
146306 85, 103
146307 103
146308 85, 105
146309 105
146310 105
146311 105
146315 202
Part No. Page
103960 231
103961 231
103968 233
103969 233
103970 233
103971 233
103972 233
103973 233
103974 229
103975 229
103976 229
103977 229
103978 229
103979 229
104068 30
104069 29
104071 28
104074 27
104076 31
104078 40
104118 34
104178 33
104186 32
104192 38
104196 37
104257 221, 231
104271 261, 263
104272 261, 263
104317 121
104319 128
104361 250
104362 245
104363 245
104438 234
104439 234
104450 221, 248
104477 29
104479 221, 222, 253
104480 221, 222, 253
104481 221, 222, 253
104482 221, 223
104483 224
104500 241
104503 239
104505 254
104506 254
104549 44
104550 45
104583 282
104584 282
104652 15
104655 16
104656 16
104666 30
104693 16
104744 40
104804 28
104809 249
104891 22
104892 21
104893 21
104894 19
Part No. Page
102826 144
102871 143
102898 146
102903 263
102917 213
102918 213
102920 213
102935 280
102972 107
102973 107
102976 107
102977 107
102985 263
102987 261, 263
102988 261, 263
102991 264
103056 281
103058 281
103080 115
103136 261, 263
103137 261, 263
103138 262, 263
103139 262, 263
103140 262, 263
103141 262, 263
103152 261, 263
103153 261, 263
103157 261, 263
103158 261, 263
103164 85, 126
103165 127
103166 85, 122, 123,
210, 255
103167 124, 125
103168 85, 117, 118,
210, 255
103169 119, 120
103171 213
103185 107
103186 107
103233 147
103239 107
103240 107
103264 193, 201
103268 259
103291 199
103321 107
103322 107
103327 107
103328 107
103336 85, 146
103340 261, 263
103341 261, 263
103349 281
103350 281
103361 116
103414 85, 115
103455 213
103542 85, 147
103577 85, 163
103634 247
103635 247
Part No. Page
103639 245
103640 231
103641 231
103644 231
103645 231
103648 233
103649 233
103650 233
103651 233
103652 233
103653 237
103654 239
103655 239
103656 239
103657 239
103658 237
103659 237
103660 237
103661 237
103669 245
103672 247
103673 247
103680 240
103681 241
103682 242
103684 229
103685 229
103686 229
103687 229
103688 221, 229
103734 231
103735 245
103817 86, 100
103893 237
103894 237
103895 239
103896 239
103897 231
103900 233
103901 233
103902 229
103903 229
103904 247
103908 245
103911 39
103916 35
103944 237
103945 237
103946 237
103947 237
103948 237
103949 237
103950 239
103951 239
103952 239
103953 239
103954 239
103955 239
103956 231
103957 231
103958 231
103959 231
315
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
Part Number Index
Part Number Index (Continued)
Part No. Page
1375582 252
1375583 252
1375791 7, 12
1375792 7
1375793 7, 12
1375794 7
1375795 6, 12
1375796 6
1375797 9
1375798 9
1375799 8
1375800 8
1375801 12
1375959 10
1375961 10
1375963 10
1375965 11
1375967 11
1445251 12
1445439 12
1445440 12
1445441 12
1470108 79
1470109 78
1470209 80
1470213 66
1734493 75
1734506 81
1734507 67
1734508 66
1734516 84
1734531 83
1734569 77
1734606 82
1734770 73
1825190 307
1825851 139, 140, 210
2041068 76
2041069 84
5084476 71
5084780 74
5086147 294
5086182 294
5102084 170
5102154 139, 210, 255
5102156 139
5102160 140
5102162 140
5103308 135
5103309 135
5103310 136
5103311 136
5104338 137
5104340 138
5111595 57
5146139 169
5146140 170
5147721 86, 172
5147722 86, 173
5147732 172
5147733 172
5147734 173
Part No. Page
147740 192
147741 192
147742 187
147743 187
147744 187
147745 190
147746 190
147747 190
173144 155, 156
173145 155, 157, 158, 159
173146 155, 160, 161
219054 58
219055 58
219137 58
219138 58
219253 58
382575 309
382811 308
390088 309
390102 310
487544 50
487545 50
487547 48
487576 54
487923 48
487937 52
487938 52
487940 48
487941 48
499991 205
530153 310
530554 267
530901 269
530902 268
531226 267, 268
531230 308
532955 195
532956 193, 195
533009 195
534204 195
534206 85, 176
534237 85, 175
534245 200
534257 198
534258 201
534267 85, 182
534972 193, 196
534974 193, 197
534975 195
534978 198
534998 85, 179, 180
535541 85, 178
535542 86, 183, 184
535584 178
535585 179, 180
535598 179, 180
746383 139, 140
867052 207
880584 309
881545 309
966926 72
1375549 252
Part No. Page
146852 107
146853 107
146858 107
146859 107
146860 107
146861 107
146868 107
146869 107
146870 107
146871 107
147030 235
147070 86, 167
147071 167
147072 167
147095 183, 184
147096 183, 184
147099 182
147100 182
147101 190
147102 190
147103 190
147104 192
147105 86, 192
147106 192
147121 16
147254 202
147278 251
147323 251
147324 251
147326 177
147333 86, 165
147334 165
147335 165
147377 44
147378 45
147381 16
147382 16
147383 16
147384 15
147396 235
147413 15
147424 176
147433 165
147434 165
147435 165
147436 167
147437 167
147438 167
147503 16
147720 86, 181
147723 188
147724 187
147726 181
147727 181
147728 188
147729 188
147730 187
147731 187
147736 188
147737 188
147738 86, 188
147739 192
Part No. Page
146386 175
146427 85
146455 112
146456 112
146457 112
146458 112
146459 112
146460 112
146461 112
146462 112
146463 112
146464 112
146465 112
146466 112
146467 112
146468 112
146469 112
146470 112
146471 112
146472 112
146473 112
146474 86, 112
146475 112
146476 112
146477 112
146478 112
146479 112
146480 112
146481 112
146482 112
146483 113
146484 113
146485 113
146486 113
146487 113
146488 113
146489 113
146490 85, 113
146491 113
146492 113
146493 113
146494 113
146495 113
146496 113
146497 113
146498 113
146499 113
146500 113
146501 113
146502 113
146503 113
146504 113
146505 113
146506 113
146507 113
146508 113
146509 113
146510 113
146762 176
146763 175
146850 107
146851 107
316
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
Part Number Index
58062 273
58074 273
58075 273
58336 273
58338 273
58342 254
58395 273
58540 273
58641 211, 213
90273 60
90274 290
90295 207
90308 298
90328 290
90381 211
90431 207
91047 60
91084 207
91085 62
91104 298
91112 62
91169 152
91170 152
91171 152
91200 60
91295 23
91410 263
91419 163
91516 213
91517 211, 213
91518 222, 253
91531 254
91533 207
91541 213
91551 222, 253
Part No. Page
104072 253
217600 153, 164, 166, 303
224910 48, 60
265871 152
265964 152
308554 152
312522 274
318619 48, 60
354500 300
354786 275
356484 60
356500 300
380392 152
466007 298
466376 286
466562 213
466571 213
466655 213
466721 207
466723 269
466763 290
466764 290
466812 211
466819 269
466905 213
466918 213
466921 213
466937 290
466943 269
466950 298
466952 269
466980 222, 253
466981 222, 253
466982 222, 253
466983 254
Part No. Page
527116 263
543518 23
547178 301
565967 286
567239 254
567296 222, 253
567297 222, 253
567298 222, 253
567307 211
567310 207
662820 303
679167 62
679996 207
758030 162
761420 275
768338 62
812665 263
843473 290
843477 253, 254, 265
843996 214, 215, 216,
217, 218, 219, 220
854040 301
854449 274
856002 274
856675 273
904507 163
904590 163
904591 163
904592 163
904640 166
904641 164
907459 162
931800 273
1213400 300
Part No. Page
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Tooling Part Number Index
Part Number Index (Continued)
Part No. Page
5535512 85, 170
5535676 85, 169
5535677 169
Part No. Page
5531216 269
5531224 269
5531225 269
Part No. Page
5147735 173
5176264 70
5176837 68
Part No. Page
5178751 70
5530553 269
5530901 269
AMPMODU Interconnection System
317
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Engineering Notes
AMPMODU Interconnection System
318
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Engineering Notes
AMPMODU Interconnection System
319
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Engineering Notes
AMPMODU Interconnection System
320
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Engineering Notes
AMPMODU
Interconnection System
Catalog 1307819 Revised 8-11
AMPMODU Interconnection System
FOR MORE INFORMATION
te.com/products/AMPMODUSystem50
te.com/products/AMPMODUMTE
TE Technical Support Center
Internet: te.com/help
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
te.com
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
1307819 CIS WR 08/2011
AMP, ACTION PIN, AMP-LATCH, AMP-O-LECTRIC, AMP-O-MATIC, AMPLIMITE, AMPMODU, AMPOMATOR,
CERTI-CRIMP, CHAMPOMATOR, PRO-CRIMPER, R-CAM, TE Connectivity and the TE connectivity (logo)
are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current.
TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all
implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice.
Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
