Model DV-10 DIN Rail Mount In-Line Amplifier DESCRIPTION These in-line amplifiers feature DIN-rail mount enclosures with front accessible electrical connections and adjustments. Amplifiers are available for strain-gage transducers. FEATURES * DIN rail mount * Unamplified transducer input * Bridge-based transducer input * 0 to 10 V three-wire output with 15 Vdc to 28 Vdc power * 5.4 Vdc or 9 Vdc excitation @ 30 mA * RFI, ESD protected * CE approved Model DV-10 DIN PERFORMANCE SPECIFICATIONS Characteristic Measure Number of channels 1 Case material Plastic Mounting 35 mm DIN Certification CE approved ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -29 C to 82 C [-20 F to 180 F] Temperature, storage -40 C to 93 C [-40 F to 200 F] OPTION CODES 2-pole filter option Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. 58e, 2-pole filter setting 1 Hz 3 Hz 5 Hz 10 Hz 20 Hz 30 Hz 50 Hz 100 Hz 300 Hz 500 Hz 1000 Hz 2500 Hz (350 ohm bridge) 7000 Hz (5000 ohm bridge) Mounting dimensions and characteristics 98,5 mm [3.87 in] TRANSDUCER INTERFACE Characteristic Measure Transducer type Bridge-based sensor Transducer excitation 5.4 Vdc or 9 Vdc @ 30 mA (short circuit protection) AMPLIFIER CHARACTERISTICS Characteristic Measure Supply voltage 15 Vdc to 28 Vdc Current draw 60 mA Zero adjustment range, coarse 30 % Zero adjustment range, fine 5 % Span adjustment range Switch selectable 1.75 mV/V to 13.3 mV/V Span adjustment range, fine -8 to +20 Linearity 0.01 % Output 10 Vdc (three-wire) Output current 2 mA Frequency response dc -5000 Hz Not RoHS compliant 2 Honeywell * Sensing and Control TYPICAL SYSTEM DIAGRAM Model DV-10 DIN Rail Mount In-Line Amplifier Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to info.sc@honeywell.com WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008814-1-EN IL50 GLO June 2008 Copyright (c) 2008 Honeywell International Inc. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Honeywell: 060-6881-02