L size 4.9 ±0.2mm
W size 4.9 ±0.2mm
T size 4.0mm max.
Size code in inch (mm) 2020 (5050)
When rated current is applied to the products, inductance will be within
±30% of initial inductance value range.
When rated current is applied to the products, the temperature rise
caused by self-generated heat shall be limited to 40°C max. (ambient
temperature 85°C).
Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C.
Packaging
code Specifications Minimum quantity
Lφ180mm Embossed taping 400
Kφ330mm Embossed taping 1500
Mass (Typ.)
1 piece 0.35g
Inductance 33µH ±20%
Inductance test frequency 100kHz
Rated current (Isat) (Based on Inductance change) 1300mA
Rated current (Itemp) (Based on Temperature rise) 1300mA
Max. of DC resistance 0.18Ω
Avg. of DC resistance 0.15Ω±20%
Self resonance frequency (min.) 6.5MHz
Operating temperature range (Self-temperature rise is included) -40℃ to 125℃
Operating temperature range (Self-temperature rise is not included) -40℃ to 85℃
Class of magnetic shield Magnetic Resin
Series LQH5BPN_38
LQH5BPN330M38# “#” indicates a package specification code.
< List of part numbers with package codes >
LQH5BPN330M38L , LQH5BPN330M38K
Shape Notes
References
Specifications
Last updated: 2019/03/16
1 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
URL : https://www.murata.com/
Chart of characteristic data (The charts below may show another part number which shares its characteristics.)
Last updated: 2019/03/16
2 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
