LM311 (KA311) SINGLE COMPARATOR VOLTAGE COMPARATOR The LM311 series is a monolithic, low input current voltage comparator. The device is also designed to operate from dual or single supplies voltage FEATURE Low input bias current : 250nA (Max) Low input offset current : 50nA (Max) Differential Input Voltage : +30V. Offset voltage null capability. Strobe capability. BLOCK DIAGRAM GND fF] 3] Voc Power supply voltage : single 5.0V supply to t15V. 8 DIP 8 SOP ORDERING IN FORMATION INCH [| 7] ouTPUT Device Package Operating Temperature IN (-)]3 6] BALANCE/STROBE LM311N 8 DIP [3| [8] 0 ~ +70C vee [4] fs] BALANCE LM311M 8 SOP SCHEMATIC DIAGRAM BALANCE 9 O Veco OUTPUT IN (+) Qi IN (-) OJ 7 4 OGND OVEE | Rev. B FAIRCHILD SEMICONDUCTOR -w 1999 Fairchild Semiconductor CorporationLM311 (KA311) SINGLE COMPARATOR ABSOLUTE MAXIMUM RATINGS Characteristic Symbol Value Unit Total Supply Voltage Veco 36 Vv Output to Negative Supply Voltage KA31 1 Vo - Vee 40 Vv Ground to Negative voltage Vee -30 Vv Differential Input Voltage VupiFr) 30 Vv Input Voltage Vi +15 Vv Output Short Circuit Duration 10 sec Power Dissipation Pp 500 mw Operating Temperature Range Topr 0~ +70 C Storage Temperature Range Tsta - 65 ~ +150 C ELECTRICAL CHARACTERISTICS (Vcc = 15V, Ta = 25C, unless otherwise specified) Characteristic Symbol Test Conditions Min Typ Max Unit Rg<50KQ 1.0 75 Input Offset Voltage p 9 Vio [NOTE 1 10 mv Input Offset Current lio 8 20 nA |NOTE 1 70 Input Bias C ' | 100 250 nA nput Bias Curren BIAS [NOTE 1 300 Voltage Gain Gy 40 200 VimV Response Time tres |NOTE 2 200 ns lo =50mA, Vi<-10mV 0.75 1.5 Saturation Voltage Vat Voc24.5V, Vee = OV 023 0.4 Vv Isink =8mA, Viz-10mV, NOTE 1 , . Strobe NO Current IstRron) 3 mA Ista =3mA, V\210mV Output Leakage Current | 0.2 50 nA p 9 SINK Voyp) =35V, Vee =Vanp =-5V -14.5 -14.7 Input Voltage Range Vur) NOTE 1 to 13.0 1013.8 Vv Positive Supply Current loc 3.0 75 mA Negative Supply Current lee -2.2 -5.0 mA Strobe Current Istr 3 mA NOTE 1.0 os z 5 3 a2 0.1 0 o 10 20 2 40 50 OUTPUT CURRENT (mA) TEMPERATURE (C) Fig. 9 LEAKAGE CURRENTS VS TEMPERATURE Fig. 10 SUPPLY CURRENT VS SUPPLY VOLTAGE to-8 Ta = 25C Vee = oe z a e = a 7 cz Oo = u 3 oe > 3 z & - a 1o-" 23 35 45 55 6s % TEMPERATURE (C) SUPPLY VOLTAGE (V) Fig. 11 OUTPUT SATURATION VOLTAGE Fig. 12 OUTPUT LIMITING CHARACTERISTICS s z w e z 9 > > oO @ S & a The 8 4 = 85C 0 5 10 5 OUTPUT CURRENT (mA) OUTPUT VOLTAGE (V) Pe FAIRCHILD ee SEMICONDUCTOR -wTRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx ISOPLANAR CoolFET MICROWIRE CROSSVOLT POP E?CMOS PowerTrench FACT qs FACT Quiet Series Quiet Series FAST SuperSOT-3 FASTr SuperSOT-6 GTo SuperSOT-8 HiSeC TinyLogic DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or This datasheet contains the design specifications for In Design product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.