https://www.phoenixcontact.com/us/products/1542570 Flush-type connector - SACC-DSIV-FS-5CON-L180 SCO - 1542570 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type connector, socket, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection Key commercial data Packing unit 11 Minimum order quantity 10 1 Weight per Piece (excluding packing) 10.1 GRM Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 C ... 85 C (Plug / socket) Degree of protection IP67 General Rated current at 40C 4A Rated voltage 60 V Number of positions 5 Contact resistance 3 m Insulation resistance 100 M Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II Pollution degree 3 Connection method Solder pins 08.11.2013 Page 1 / 4 https://www.phoenixcontact.com/us/products/1542570 Flush-type connector - SACC-DSIV-FS-5CON-L180 SCO - 1542570 Technical data General Mounting type Rear mounting M12 x 1 With flat nut Material Inflammability class according to UL 94 HB Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals 08.11.2013 Page 2 / 4 https://www.phoenixcontact.com/us/products/1542570 Flush-type connector - SACC-DSIV-FS-5CON-L180 SCO - 1542570 Approvals Approvals UL Recognized Ex Approvals Approvals submitted Approval details UL Recognized mm/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V Drawings Schematic diagram 3 4 Dimensioned drawing O14,8 -0,1 3 O12,2 0,05 1,2 0,04 5 2 1 Pin assignment M12 socket, 5-pos., A-coded, socket side view Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 1 08.11.2013 Page 3 / 4 https://www.phoenixcontact.com/us/products/1542570 Flush-type connector - SACC-DSIV-FS-5CON-L180 SCO - 1542570 Dimensioned drawing Drilling diagram O5 O1,2 4 5 3 6,5 O2,8 O12,2 0,05 1,2 0,04 O2,1 Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 2 15 M12 flush-type connector Dimensioned drawing 27,5 2 3 3,5 SW15 19,5 7 O14 O16,5 2 max.3 SW14 M12 flush-type connector (c) Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 08.11.2013 Page 4 / 4