N Connectors ONLINE CATALOG Connect Here. Contents CLICK ON ANY LINE TO GO DIRECTLY TO THE INDICATED PAGE Navigation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications and interface dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Design Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Cable Connectors Accessories Straight Cable Plugs . . . . . . . . . 8 Resistive Terminations . . . . . . . 26 Right Angle Cable Plugs. . . . . . 11 Dust Caps. . . . . . . . . . . . . . . . . 26 Tee Cable Plugs . . . . . . . . . . . . 12 In-Series Adapters . . . . . . . . . . 27 Straight Cable Jacks . . . . . . . . . 12 N70 (70 impedance) Bulkhead Cable Jacks . . . . . . . . 14 Cable Connectors. . . . . . . . . . . 29 Tee Bulkhead Cable Jacks . . . . . 15 Receptacles . . . . . . . . . . . . . . . 30 Panel Cable Jacks . . . . . . . . . . . 17 In-Series Adapters . . . . . . . . . . 31 Receptacles Technical Information Panel Jack Receptacles . . . . . . . 19 Cable Groups . . . . . . . . . . . . . . 32 Right Angle Panel Jack Receptacles . . . . . . . 22 Cable Assembly Instructions . . 33 Panel Plug Receptacles. . . . . . . 23 Bulkhead Jack Receptacles . . . . 24 Assembly Tooling . . . . . . . . . . . 37 Mounting Figures . . . . . . . . . . 38 Ordering and Warranty . . . . . . 39 Stripline Receptacles . . . . . . . . 24 PressMount Receptacles. . . . . . 25 ( 978 ) 927-1060 * FAX ( 978 ) 922-6430 * www.DeltaRF.com P.O. Box 53 * 416 Cabot St. * Beverly, MA 01915 Online Catalog Navigation Guide DELTA ELECTRONICS MANUFACTURING We have configured this online catalog to take advantage of Acrobat navigation shortcuts (links). However, these links are not visible on the pages-- making them visible would compromise the page's readability. * Clicking on any entry in the Table of Contents will take you to the indicated page. * Shown below are the "hot spots" on all of the product pages that will take you to background information on various connector characteristics. * After you use a link to jump to another page, you can use the "back" arrow in Acrobat's menu bar to return to the page you jumped from. * Configure Acrobat Reader to show bookmarks for a table of contents by specific characteristic (for example, cable plugs broken out by cable attachment method). * To find a specific part number, use Acrobat's search feature. In addition, the pages are formatted to fit within the margins of standard laser or inkjet printers-- no need to use the "shrink to fit" option when printing pages from Acrobat. Click here to go to the Table of Contents Click on the Delta logo on any page to jump to the table of contents. Click on the page title to jump to specifications and interface dimensions. BNC Cable Jacks DELTA ELECTRONICS MANUFACTURING Panel Jack--Military Clamp for Flexible Cable C dia. C dia. B B A Figure 2 A Figure 1 Cable Group Fig. 1 2, 3 5, 6 1 1 2 Dimensions A B C 1.75 1.75 1.16 .63 .63 .55 Mounting Figure .75 .75 .50 Click here to jump to dimensions for Delta mounting figures. 33 33 07 Plating Body Contact Nickel Nickel Nickel Silver Silver Silver Delta P/N Assembly Procedure/ Trim Code 1011-001-N330 1011-004-N330 UG-291C/U A/20 A/20 A/17 Click here to jump to the cable assembly procedure for this connector. Click here to jump to information on alternate body plating. Click here to jump to a guide to Delta cable groups. Click here to go to Delta's website if your computer is configured for Web connection via Acrobat. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 2 Introduction and Specifications DELTA ELECTRONICS MANUFACTURING General Description Delta type N connectors are medium size, 50 impedance connectors with 5 8"-24 threaded coupling. They are best suited for use with cables in the range of .350" to .450" diameter, but are available for other cables with diameters from .100" to over 1". M39012 QPL N connectors and M55339 QPL N adapters are also included in this catalog. Our extensive line of type N receptacles includes configurations for virtually any packaging requirement, and we can supply any adapter or accessory you need to complete your system design. As with our other connector series, Delta's customer-driven design results in N series connectors with practical and unique features that make your design and assembly process easier. Some of these include: * Heli-Grip cable connectors for fast, reliable assembly to flexible cable without special tooling. * One-Step cable connectors for quick, accurate assembly to semi-rigid cable. * PressMount receptacles (page 25) mount securely in a single round hole, saving space on your components and reducing your housing fabrication costs. * Panel receptacles with flange sizes to match the same hole pattern as standard SMA or BNC/TNC connectors, letting you drill one hole pattern and mount BNC, N, SMA, TNC, or 7/16 series connectors as needed. * 70 impedance N connectors (see page 29) for matched-impedance applications. Our N series product line is still growing, so please call if you don't see what you need. For adapters between N and other series, download the document DeltaABS.pdf from our website. N Specifications* Electrical: Nominal Impedance: 50 ohms. Frequency Range: DC-11 GHz. Voltage Rating: 1,000 volts RMS. Dielectric Withstanding Voltage: 2,500 volts RMS. Insulation Resistance: 5,000 megohms. Contact Plating: Silver per QQ-S-365, or Gold per MIL-G-45204. Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50. Other Metal Parts: Brass per ASTM B16, plated: Silver per QQ-S-365, or Nickel per QQ-N-290. Materials/Finishes: Insulators: Teflon per ASTM D1710. Male Contacts: Brass per ASTM B16. Female Contacts: Beryllium Copper per ASTM B196. All other specifications are in accordance with the latest issues of MIL-PRF-39012, or MIL-A-55339, or other applicable MIL specifications, and interfaces are in accordance with MIL-STD-348. Plug Interface** .398/.412 .210/.230 .827 dia. max. .119 .124 dia. .625-24 UNEF-2B .177 min. full thread Reference Plane .016/.060 .330 dia. max. .158 .168 .630 dia. min. COMPENSATING RING OPTIONAL Jack Interface** .356/.362 .625-24 UNEF-2A .336 .344 Reference Plane .187/.207 .316 .320 .047/.077 .172/.202 SLOTS REQUIRED; DESIGN OPTIONAL. .627 dia. max. .047 .077 *These specifications are typical and may not apply to all connectors. Detailed specifications for individual connectors are available on request. .119/.124 .422 min. **Some proportions altered to illustrate detail. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 3 Design Features DELTA ELECTRONICS MANUFACTURING About Delta's Customer-Driven Design At Delta, Customer-Driven Design isn't just a catchy slogan. It means that we make RF connectors that help you build your products efficiently, quickly, and cost-effectively. Because we design for your needs, nobody else can offer you such a broad line of standard connectors, along with an ever-growing list of innovative, user-friendly design variations like those detailed on these pages. These featured connector technologies grew out of real-world requirements, and have saved our customers untold hours and dollars over the years. And there are thousands of other special connector designs we've produced that we don't have space to include in this catalog. So if you don't see the exact connector configuration you need, please call us--we may have already made it. If not, we'll work with you to provide the the connectors you need, with the best price/performance balance in the business, and with quality and delivery that will enhance your products and production schedules. Design Features Plating options...................................................................................................................4 Panel receptacles with common flange sizes ...................................................................5 Type N receptacles with one-piece bodies .......................................................................5 Heli-Grip connectors for flexible cable .............................................................................6 Coupling nut options for N series plugs ...........................................................................6 One-Step connectors for semi-rigid cable ........................................................................7 PressMount receptacles .....................................................................................................7 Plating Options for Economy and Performance (Albaloy or nickel--available for all connector series except SMA) Silver plating has long been standard on RF connectors with brass bodies, but its high cost and low corrosion resistance make it less than ideal in most applications. Nickel plating is less expensive and more durable than silver, and is standard on many of our connectors. However, in some applications, nickel plating can introduce unwanted intermodulation distortion, particularly on large size connectors. For these applications, we offer optional Albaloy plating, a tin/zinc/copper composite with a bright white finish, the corrosion resistance of nickel, and the low intermodulation distortion of silver plating. Albaloy plating has the same composition as, and is fully compatible with, other (R) commercial platings designated Sucoplate , IP-23, White Bronze, and Tri-Alloy. To order a Delta connector with plating other than the listed finish, substitute A, N, or Q in the Delta part number as below: For silver plating: 1111-111-A111. For nickel plating: 1111-111-N111. For Albaloy plating: 1111-111-Q111. Note: M39012 and M55339 QPL connectors can only be supplied with the specified plating. SMA connectors with stainless-steel bodies are available with gold plating or passivated finish. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 4 Design Features DELTA ELECTRONICS MANUFACTURING Common Flange Sizes Simplify Your Production (Available on BNC, N, SMA, TNC, and 7/16 series connectors as noted in product pages) Does it make sense that you have to drill your components with different mounting hole patterns whenever you need to ship them with a different connector series attached? We didn't think so, either. That's why we offer a wide range of connectors in different series with common flange sizes and contact/insulator configurations. Now you can streamline your production process and shorten your delivery cycle--just predrill your components with one mounting hole pattern, and ship them with the connectors your customers require. Flange Sizes and Available Interfaces 12" square flange (Delta mounting figure 05)--standard flange size for SMA .102 dia. typ. .340 (CL ) typ. .500 square BNC N SMA TNC 1116" square flange (Delta mounting figure 09)--standard flange size for BNC, TNC .125 dia. typ. .500 (CL ) typ. .687 BNC square N SMA TNC 1" square flange (Delta mounting figure 33)--standard flange size for type N .125 dia. typ. .718 (CL ) typ. 1.00 square BNC N SMA TNC 7/16 These connectors are available with a wide variety of post, tab, solder pot, or slotted contacts. N Panel Receptacles With One-Piece Bodies (Available for most type N 4-hole flange receptacles--contact factory for exact types) Our in-house machining capability now includes production of type N flange receptacles with one-piece bodies, replacing the old machined body/stamped flange method. With no unsightly solder joints, these connectors have enhanced appearance and strength compared with two-piece designs. The machined flanges are flatter than stamped flanges, and our high-speed turning centers can produce any volume required to fill your production quantity needs. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 5 Design Features DELTA ELECTRONICS MANUFACTURING Heli-Grip(R) Cable Attachment--for Flexible Cable Backnut; cone/contact/ insulator subassembly Cable assembled to hardware subassembly (Proportions altered to illustrate detail) As assembled in connector With their reduced parts count and rapid assembly, Delta's Heli-Grip connectors offer significant time savings in your cable assembly operation, without the need for dedicated crimp tools. Heli-Grip connectors have captivated contacts, and assembly is easy--simply trim the cable, slide the trimmed cable into the cone/insulator/contact assembly (left), solder the center conductor to the contact, and screw the body assembly (right) onto the backend assembly. Heli-Grip connectors have cable retention strength greater than the force required to tear the cable braid. Standard N Heli-Grip Configurations Straight plug--page 9j Straight jack--page 13 Bulkhead jack--page 15 Panel jack--page 17 Coupling Nut Options N plugs can be supplied with a hex coupling nut for applications requiring plugs to be torqued to a specific value. Please call for part numbers of specific connectors with hex coupling nuts, which can be supplied with or without safety-wire holes. Standard coupling nut Hex coupling nut Hex coupling nut with lockwire holes (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 6 Design Features DELTA ELECTRONICS MANUFACTURING One-Step Cable Attachment--for Semi-Rigid Cable (Available for N and SMA connector series as noted in product pages) Body assembly with captive contact and insulator Cable Solder (Proportions altered to illustrate detail) Delta One-Step connectors for semi-rigid cable have captivated contacts and insulators preassembled in the body assembly. With no loose parts to handle, assembly is as simple as trimming the cable (and chamfering the cable center conductor), inserting the cable into the body assembly, and soldering the cable jacket to the connector body. The internal design of the body assembly automatically maintains the proper gap distance between the center contact and the cable dielectric, ensuring the best electrical performance and eliminating the shimming operation required by connectors with non-captive contacts. Standard N One-Step Configurations Straight plug--page 10 Bulkhead jack--page 16 Panel jack--page 18 Delta PressMount Receptacles Component housing Shoulder As mounted on component Connector design Internal Circuitry Knurl Delta PressMount receptacles eliminate the need for complicated mounting hole patterns and mounting hardware. They are simply pressed into a single through hole, and can be used in component housings as small as the outer diameter of the connector. An integral shoulder provides a positive depth stop during mounting. Besides the standard types shown below, PressMount receptacles are available with a wide variety of contact and insulator configurations--please call if you don't see what you need. Standard N PressMount Receptacles N jack N plug (Solder pot, tab, or post contact--page 25) (Solder pot, tab, or post contact--page 25) (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 7 N Cable Plugs DELTA ELECTRONICS MANUFACTURING Straight Plug--Military Clamp for Flexible Cable B dia. B dia. B dia. A A Figure 1 A Figure 3 Figure 2 (Includes armor clamp) Cable Group Figure 1 1 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 5, 6 5, 6 5, 6 7 7 8 9 9 15 15 16 16 20 25 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 1 1 3 2 Dimensions A B 1.50 1.50 1.80 1.50 1.50 1.50 1.50 1.50 1.50 1.41 1.41 1.41 1.38 1.38 1.41 1.38 1.38 2.42 2.42 1.80 1.80 3.09 1.38 .75 .75 .68 .75 .75 .75 .75 .75 .75 .50 .50 .50 .50 .50 .50 .50 .50 .75 .75 .88 .88 1.31 .50 Body Plating Contact Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Nickel Silver Nickel Nickel Silver Silver (C) Silver Gold Gold Gold Silver (C) Gold (C) Gold (C) Silver Gold Gold (C) Silver Silver (C) Silver (C) Silver Silver (C) Silver Gold (C) Silver Gold (C) Silver Silver Delta P/N Assembly Procedure/ Trim Code UG-18E/U 1101-001-N001 UG-21B/U UG-21D/U UG-21E/U UG-21G/U UG-1185/U UG-1185A/U M39012/01-0005* UG-536B/U UG-536C/U 1101-015-N001 UG-603A/U 1101-021-N001 1101-043-N001 1101-036-N000 1101-036-N001 UG-941B/U M39012/01-0125* UG-204A/U M39012/01-0015* UG-557A/U 1101-132-N000 A/01 A/01 C/01 A/01 A/01 A/01 A/01 A/01 A/01 A/02 A/02 A/02 A/02 A/02 A/02 A/02 A/02 D/01 D/03 C/02 A/01 D/02 A/03 * Lockwire holes in coupling nut. Optional Type N Coupling Nut Examples .033 dia. lockwire holes (3) .812 hex 13/16" hex coupling nut .812 hex 13/16" hex coupling nut with lockwire holes These designs allow the connectors to be tightened with a wrench for precise torquing of mated parts, and can be supplied on any Delta type N plug. Please call for details of these options or any other special requirements you may have. (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 8 N Cable Plugs DELTA ELECTRONICS MANUFACTURING Straight Plug--Crimp Type for Flexible Cable Figure 2 Figure 1 B B (crimp sleeve) (crimp sleeve) A A Cable Group Figure 2 2 2 2 2B 3A, 4 3A, 4 3A, 3C, 4 3A, 3C, 4 4 5 5 6 6 6 7 7 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 2 1 Dimensions A B 1.51 1.55 1.55 1.55 1.55 1.55 1.51 1.55 1.55 1.50 1.43 1.48 1.43 1.45 1.45 1.43 1.38 .63 .63 .60 .60 .63 .63 .63 .60 .60 .63 .50 .50 .50 .50 .50 .50 .50 Plating Body Contact Nickel Nickel Silver Silver Nickel Nickel Nickel Silver Silver Nickel Nickel Nickel Nickel Nickel Silver Nickel Nickel Silver Gold (C) Gold (C) Gold (C) Silver Gold (C) Silver Gold (C) Gold (C) Silver Silver Gold (C) Silver Gold (C) Gold (C) Silver Gold (C) Delta P/N Assembly Procedure/ Trim Code 1103-002-N000 1103-002-N001-9 M39012/01B0007* M39012/01-0502* 1103-070-N000 1103-004-N001-1 1103-005-N000 M39012/01B0008* M39012/01-0501* 1103-079-N000 1103-017-N000 1103-017-N001 1103-013-N000 1103-018-N001 M39012/01-0503* 1103-020-N000 1103-020-N001 B/01 B/03 B/03 B/03 B/01 B/03 B/01 B/03 B/03 B/01 B/04 B/05 B/04 B/03 B/03 B/06 B/03 * Lockwire holes in coupling nut. Straight Plug--Heli-Grip(R) for Flexible Cable Heli-Grip(R) Cable Attachment B dia. B dia. A A Figure 1 Cable Group Figure 2, 3 6 RG-223 7 24 26 1 2 2 2 1 1 5, These connectors have captivated contacts and allow rapid, easy assembly--simply trim the cable, slide into the cone/insulator/contact assembly (left), solder the center conductor to the contact, and screw body assembly (right) onto cable assembly. Figure 2 Dimensions A B 1.50 1.41 1.41 1.38 1.50 1.50 .75 .50 .50 .50 .75 .75 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) (C) Delta P/N Assembly Procedure/ Trim Code 1101-004-N005 1101-015-N005 1101-015-N005-1 1101-021-N005 1101-052-N005 1101-108-N005 E/01 E/02 E/02 E/02 E/01 E/01 Except RG-223/U. (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 9 N Cable Plugs DELTA ELECTRONICS MANUFACTURING Straight Plug--For Semi-Rigid Cable B dia. B (I.D.) A A Figure 1 Figure 2 (Solder-clamp; gold-plated ferrule, nickel-plated body) (Direct solder; gold-plated body, nickel(1) or passivated(2) coupling nut) Delta One-Step Cable Attachment for Semi-Rigid Cable Solder Delta "One-Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable--simply trim the cable jacket and dielectric flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. Cable B (I.D.) B (I.D.) A .812 hex A Figure 3 Figure 4 (One-Step cable attachment, standard coupling nut) (One-Step cable attachment, hex coupling nut) Cable Group Figure 12 12 12 13 13 13 13 13 14 1 2 4 1 2 2 3 4 1 Dimensions A B 1.50 .96 1.44 1.41 .96 .96 .96 .96 1.41 .50 .254 .254 .50 .143 .143 .143 .143 .50 Plating Body Contact Nickel Mixed(1) Silver Nickel Mixed(1) Mixed(2) Silver Silver Nickel Silver Silver Gold (C) Silver Gold Gold Gold (C) Gold (C) Silver (1) Brass Delta P/N Assembly Procedure/ Trim Code 1101-050-N000 1101-050-N003 1101-050-A003-7 1101-031-N003 1101-031-N003-1 1101-031-K00M 1101-031-A003-8 1101-031-A003-12 1101-025-N003 F/03 *** I/01 F/01 *** *** I/01 I/01 F/02 body and coupling nut. steel body and coupling nut. (2) Stainless ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 10 N Cable Plugs DELTA ELECTRONICS MANUFACTURING Right Angle Plug--Military Clamp for Flexible Cable A A A B B B C dia. C dia. C dia. Figure 1 Figure 2 Figure 3 (Mitered body) (Cube body with access cap) (Cube body) Cable Group Figure 2, 3 2, 3 2, 3 5 5, 6 5, 6 7 9 19 1 3 3 3 2 3 2 2 3 A Dimensions B C 1.47 1.36 1.39 1.39 1.55 1.35 1.55 1.55 1.36 1.88 1.66 1.66 2.00 1.28 1.55 1.28 1.28 1.66 .75 .75 .75 .75 .50 .56 .50 .50 .75 Body Plating Contact Nickel Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver (C) Gold (C) Gold Gold (C) Silver (C) Silver (C) Silver (C) Silver (C) Silver (C) Assembly Procedure/ Trim Code Delta P/N UG-594B/U M39012/05-0101 1105-004-N000 1104-032-N001 1105-015-N000 1105-015-N001 1105-021-N000 1105-036-N001 1104-027-N001 A/01 A/07 A/04 A/08 A/11 A/09 A/11 A/11 A/07 Right Angle Plug--Crimp Type for Flexible Cable A A A B B B C dia. C dia. Figure 1 Figure 2 Figure 3 (Cube body) (Cube body with access cap) (Mitered body) Cable Group Figure 2 2 3 2 3 6 1 2 1 3 3 3 Dimensions A B C 1.39 1.39 1.39 1.41 1.41 1.41 1.77 1.25 1.77 2.30 2.30 2.25 .75 .-- .75 .687 .687 .687 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Silver Silver (C) Silver Gold (C) Gold (C) Gold (C) Delta P/N Assembly Procedure/ Trim Code 1107-002-N000 1107-002-N000-1 1107-005-N000 1107-002-N001-2 1107-004-N001-2 1107-034-N001-1 B/07 B/09 B/07 B/30 B/30 B/08 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 11 N Cable Plugs/Jacks DELTA ELECTRONICS MANUFACTURING Tee Plug--For Flexible and Semi-Rigid Cable A A Figure 1 Figure 2 (Crimp type for flexible cable) (Direct solder for semi-rigid cable) B Cable Group Figure 2 3 6 7 9 13 1 1 1 1 1 2 Dimensions A B 1.39 1.39 1.39 1.39 1.39 1.39 2.00 2.00 1.82 1.82 1.82 .90 B Body Plating Contact Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver (C) (C) (C) (C) (C) (C) Assembly Procedure/ Trim Code Delta P/N 1185-002-A000 1185-004-A000-2 1185-013-A001 1185-019-A000 1185-036-A000 1185-031-A000 B/16 B/16 B/17 B/17 B/17 *** Straight Jack--Military Clamp for Flexible Cable B dia. B dia. B dia. A A Figure 1 A Figure 3 Figure 2 (Includes armor clamp) Cable Group Figure 1 1 2, 3 2, 3 2, 3 2, 3 2, 3 5, 6 5, 6 7 7 7 15 19 22 1 1 1 1 1 1 1 2 2 2 2 2 3 1 1 Dimensions A B 1.56 1.67 1.56 1.56 1.56 1.56 1.67 1.41 1.47 1.41 1.27 1.47 2.25 1.56 1.87 .75 .75 .75 .75 .75 .75 .75 .50 .50 .50 .50 .50 .75 .75 .69 Plating Body Contact Nickel Silver Nickel Nickel Nickel Nickel Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Gold (C) Silver Gold Silver (C) Silver (C) Gold (C) Silver Silver (C) Silver Silver Silver (C) Silver Gold (C) Gold Delta P/N Assembly Procedure/ Trim Code UG-20E/U M39012/02-0101 UG-23D/U UG-23F/U UG-1186/U UG-1186A/U M39012/02-0003 1108-015-N000 1108-015-N001 UG-602A/U 1108-000-N000-3* 1108-021-N001 UG-940B/U 1108-027-N001 1108-123-N000 A/01 A/01 A/01 A/01 A/01 A/01 A/01 A/05 A/02 A/02 -- A/02 D/03 A/12 C/03 *UG-602A/U less clamping hardware. ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 12 N Cable Jacks DELTA ELECTRONICS MANUFACTURING Straight Jack--Crimp Type for Flexible Cable Figure 1 B (crimp sleeve) A Cable Group Figure 2 2 2 2 3 3 3 3 6 6 1 1 1 1 1 1 1 1 1 1 Dimensions A B 1.64 1.64 1.47 1.60 1.64 1.64 1.47 1.60 1.56 1.54 Plating Body Contact .60 .60 .50 .63 .60 .60 .50 .63 .50 .50 Silver Silver Nickel Nickel Silver Silver Nickel Nickel Nickel Silver Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) (C) (C) Delta P/N Assembly Procedure/ Trim Code M39012/02B0008 M39012/02-0502 1110-002-N000 1110-002-N001 M39012/02B0009 M39012/02-0501 1110-005-N000 1110-005-N001 1110-013-N000-1 M39012/02-0503 B/10 B/03 B/10 B/11 B/10 B/03 B/10 B/10 B/12 B/03 Straight Jack--Heli-Grip(R) for Flexible Cable B dia. B dia. Figure 1 Figure 2 A A Cable Group Figure 2, 3 6 RG-223 7 8 9 1 2 2 2 2 2 5, Dimensions A B 1.63 1.41 1.41 1.41 1.41 1.41 Plating Body Contact .75 .50 .50 .50 .50 .50 Nickel Nickel Nickel Nickel Nickel Nickel Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) (C) Delta P/N Assembly Procedure/ Trim Code 1108-004-N005-2 1108-018-N005-2 1108-015-N005 1108-019-N005-2 1108-029-N005-1 1108-037-N005-2 E/01 E/02 E/02 E/02 E/02 E/02 Except RG-223/U. Straight Jack--For Semi-Rigid Cable B (I.D.) B (I.D.) Figure 2 Figure 1 A A Cable Group Figure 12 13 1 2 Dimensions A B 1.07 1.00 .254 .143 Plating Body Contact Silver Silver Gold Gold Delta P/N Assembly Procedure/ Trim Code 1108-050-A003-3 1108-031-A003 *** *** ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 13 N Cable Jacks DELTA ELECTRONICS MANUFACTURING Bulkhead Jack--Military Clamp for Flexible Cable C dia. C dia. A Figure 1 D dia. B B A Figure 2 (Rear mount) Cable Group Fig. 1 2, 3 2, 3 2, 3 5, 6 5, 6 7 7 9 10 11 16 1 1 1 1 2 2 2 2 2 2 2 1 (Rear mount) Dimensions A B C D 1.75 1.75 1.84 1.75 1.67 1.67 1.47 1.47 1.48 1.48 1.48 1.90 .92 .92 .92 .92 .92 .92 .92 .92 .92 .92 .92 .92 .75 .75 .75 .75 .50 .50 .50 .50 .50 .50 .50 .88 D dia. Mounting Max. Figure Panel .900 .875 .812 .875 .812 .875 .875 .875 .875 .875 .875 .875 72 72 72 72 72 72 72 72 72 72 72 72 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 Plating Body Contact Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Gold (C) Silver Silver (C) Gold Silver Gold (C) Silver Gold (C) Silver (C) Silver (C) Silver (C) Gold (C) Delta P/N M39012/03-0101 UG-160D/U 1116-003-N721 1116-004-N720-1 UG-556B/U 1116-015-N721 1116-021-N720 1116-021-N721 1116-036-N721 1116-100-N721 1116-038-N721 M39012/03-0102 Assembly Procedure/ Trim Code A/01 A/01 *** A/01 A/06 A/02 A/14 A/14 A/10 A/10 A/10 A/01 Bulkhead Jack--Crimp Type for Flexible Cable Figure 1 (Rear mount) C B D dia. Mounting Max. Figure Panel Plating Body Contact (crimp sleeve) A Cable Group Fig. 2 2 3 3 6 6 7 9 10 1 1 1 1 1 1 1 1 1 Dimensions A B C D 1.84 1.84 1.84 1.84 1.74 1.74 1.59 1.45 1.45 .92 .92 .92 .92 .95 .92 .92 .88 .88 .60 .60 .60 .60 .50 .50 .50 .44 .44 .875 .875 .875 .875 .875 .875 .812 .812 .812 72 72 72 72 72 72 72 72 72 .25 .25 .25 .25 .25 .25 .25 .25 .25 Silver Silver Silver Silver Nickel Silver Nickel Nickel Nickel Gold (C) Gold (C) Gold (C) Gold (C) Gold (C) Gold (C) Silver Silver (C) Gold (C) Delta P/N M39012/03B0004 M39012/03-0502 M39012/03B0005 M39012/03-0501 1119-013-N721 M39012/03-0503 1119-020-N720 1119-036-N721 1119-100-N721 Assembly Procedure/ Trim Code B/03 B/03 B/03 B/03 B/13 B/03 B/14 B/15 B/15 ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 14 N Cable Jacks DELTA ELECTRONICS MANUFACTURING Bulkhead Jack--Heli-Grip(R) for Flexible Cable C dia. C dia. A Figure 1 .812 dia. B A Figure 2 .812 dia. B Heli-Grip(R) Cable Attachment These connectors have captivated contacts and allow rapid, easy assembly--simply trim the cable, slide into the cone/insulator/contact assembly (left), solder the center conductor to the contact, and screw body assembly (right) onto cable assembly. Cable Group Fig. 2, 3 6 RG-223 7 10 1 2 2 2 2 5, Dimensions A B C 1.84 1.69 1.69 1.69 1.69 .92 .92 .92 .92 .92 Mounting Figure Max. Panel 72 72 72 72 72 .25 .25 .25 .25 .25 .75 .50 .50 .50 .50 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) Delta P/N Assembly Procedure/ Trim Code 1116-004-N725 1116-015-N725 1116-015-N725-1 1116-021-N725 1116-100-N725 E/01 E/03 E/03 E/03 E/03 Except RG-223/U. Tee Bulkhead Jack--For Flexible and Semi-Rigid Cable A A C dia. C dia. B B .675 Cable Group Fig. 2 3 6 7 9 13 1 1 1 1 1 2 Figure 1 Figure 2 (Crimp type for flexible cable) (Direct solder for semi-rigid cable) Dimensions A B C 1.40 1.40 1.38 1.38 1.38 1.38 .675 2.00 2.00 1.89 1.89 1.89 .90 .75 .75 .75 .75 .75 .75 Mounting Figure Max. Panel 55 55 55 55 55 55 .10 .10 .10 .10 .10 .10 Plating Body Contact Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1185-002-A551 1185-004-A551 1185-013-A551 1185-019-A551 1185-036-A551 1185-031-A551 Assembly Procedure/ Trim Code B/16 B/16 B/17 B/17 B/17 *** ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 15 N Cable Jacks DELTA ELECTRONICS MANUFACTURING Bulkhead Jack--For Semi-Rigid Cable C across flats O-ring Ferrule Backnut Collet .812 dia. B A Figure 1 (Collet clamp [solderless] cable attachment, captive contact in body) C dia. C (I.D.) A Figure 2 .812 dia. B .812 dia. B A Figure 3 (Direct solder) (Solder-clamp; gold-plated ferrule, nickel-plated body) Delta One-Step Cable Attachment for Semi-Rigid Cable C (I.D.) Solder Cable Delta "One-Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable--simply trim the cable jacket and dielectric flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. Cable Group Fig. 12 13 13 13 14 14 14 1 2 3 4 2 3 4 Dimensions A B C 1.55 1.67 1.33 1.38 1.67 1.33 1.38 .889 .922 .884 .922 .922 .884 .922 .50 .50 .145 .143 .50 .090 .088 A B .875 dia. Figure 4 (One-Step cable attachment) Mounting Figure Max. Panel 72 72 72 72 72 72 72 .25 .25 .25 .25 .25 .25 .25 Plating Body Contact Nickel Nickel Nickel Silver Nickel Nickel Silver Gold Gold Gold Gold Gold Gold Gold (C) (C) (C) Delta P/N 1116-163-N721 1116-031-N720 1116-031-N723-1 1116-031-A723-3 1116-025-N723 1116-025-N723-1 1116-025-A723-2 Assembly Procedure/ Trim Code *** F/04 *** I/01 F/04 *** I/01 ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 16 N Cable Jacks DELTA ELECTRONICS MANUFACTURING Panel Jack--For Flexible Cable C dia. C dia. B B A A Figure 1 Figure 2 Heli-Grip(R) Cable Attachment (where noted) These connectors have captivated contacts and allow rapid, easy assembly--simply trim the cable, slide into the cone/insulator/contact assembly (left), solder the center conductor to the contact, and screw body assembly (right) onto cable assembly. Military Clamp for Flexible Cable Cable Group Fig. 1 2, 3 2, 3 2, 3 2, 3 2, 3 5, 6 5, 6 5, 6 5, 6 5, 6 7 9 9 19 22 1 1 1 1 1 1 2 2 2 2 2 2 2 2 1 1 Dimensions A B C 1.67 1.58 1.58 1.58 1.58 1.67 1.41 1.41 1.41 1.48 1.41 1.41 1.44 1.48 1.56 1.87 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .75 .75 .75 .75 .75 .75 .50 .50 .50 .50 .50 .50 .50 .50 .75 .69 Mounting Figure 33 33 33 33 33 33 33 33 27 27 33 33 33 33 33 30 Plating Body Contact Silver Nickel Nickel Nickel Nickel Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Gold (C) Silver Gold Silver (C) Silver (C) Gold (C) Silver Gold Silver Gold (C) Silver (C) Silver Silver Silver (C) Gold (C) Gold Delta P/N Assembly Procedure/ Trim Code M39012/02-0104 UG-22D/U UG-22F/U UG-1187/U UG-1187A/U M39012/02-0006 UG-1095B/U UG-1095C/U 1111-015-N270 1111-015-N271 1111-015-N331 UG-593A/U 1111-036-N330 1111-036-N331 1111-027-N331 1111-123-N300 A/01 A/01 A/01 A/01 A/01 A/01 A/13 A/13 A/13 A/02 A/02 A/14 A/16 A/15 A/12 C/03 Delta P/N Assembly Procedure/ Trim Code 1111-004-N335 1111-015-N335 1111-015-N335-1 1111-021-N335 1111-037-N335-1 1111-100-N335-1 E/01 E/03 E/03 E/03 E/03 E/03 Heli-Grip for Flexible Cable Cable Group Fig. 2, 3 5, 6 RG-223 7 9 10 1 2 2 2 2 2 Dimensions A B C 1.58 1.41 1.41 1.41 1.41 1.41 .66 .66 .92 .66 .66 .66 .75 .50 .50 .50 .50 .50 Mounting Figure 33 33 33 33 33 33 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) (C) Except RG-223/U. (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 17 N Cable Jacks DELTA ELECTRONICS MANUFACTURING Panel Jack--Crimp Type for Flexible Cable Captive insulator Crimp sleeve C B Backnut/crimp tail Captive contact C B A A Figure 1 (Standard crimp type) Cable Group Fig. 2 3 5 6 6 9 1 1 2 2 1 2 Figure 2 (Contact and insulator captive in backnut) Dimensions A B C 1.64 1.64 1.19 1.19 1.54 1.16 .66 .66 .595 .595 .66 .595 Mounting Figure .60 .60 .50 .50 .50 .38 33 33 33 33 33 33 Plating Body Contact Gold (C) Gold (C) Silver (C) Silver (C) Gold (C) Silver (C) Silver Silver Nickel Nickel Silver Nickel Assembly Procedure/ Trim Code Delta P/N M39012/02-0512 M39012/02-0511 1155-017-N331 1155-013-N331 M39012/02-0513 1155-037-N331 B/03 B/03 *** *** B/03 *** Panel Jack--For Semi-Rigid Cable C dia. Figure 1 (Solder-clamp; gold-plated ferrule, nickel-plated body) B A C (I.D.) C (I.D.) A B B A Figure 2 (One-Step cable attachment--see page 74 for details) Cable Group Fig. 13 13 13 14 14 14 1 2 3 1 2 3 Dimensions A B C 1.41 1.11 1.07 1.41 1.11 1.07 .66 .66 .64 .66 .66 .64 .50 .143 .143 .50 .088 .088 Mounting Figure 33 09 33 33 09 33 Figure 3 (One-Step cable attachment--see page 74 for details) Plating Body Contact Nickel Silver Silver Nickel Silver Silver Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) Delta P/N Assembly Procedure/ Trim Code 1111-031-N333-1 1111-031-A091-1 1111-031-A333-4 1111-025-N333 1111-025-A091-1 1111-025-A333-2 F/05 I/01 I/01 F/05 I/01 I/01 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 18 N Receptacles DELTA ELECTRONICS MANUFACTURING Panel Jack Receptacle--Solder Pot Contact D C .032 .162 dia. C (I.D.) B (I.D.) D B A .050 dia. A Figure 1 Figure 2 (11/16" square flange, interchangeable with BNC and TNC standard flange size) D C (I.D.) Figure 3 A Figure 1 1 1 1 1 1 1 1 2 3 A 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 .735 1.13 Dimensions B C .66 .66 .66 .66 .66 .66 .66 .66 .075 .66 .100 .100 .100 .100 .100 .100 .100 .100 .125 .100 D Mounting Figure .080 .080 .080 .080 .080 .080 .080 .080 .25 .080 33 33 18 32A 32 33 33 95 09 33 B Plating Body Contact Silver (C) Gold (C) Silver (C) Silver (C) Gold (C) Gold (C) Gold (C) Silver (C) Silver (C) Gold (C) Nickel Silver Nickel Nickel Nickel Silver Nickel Nickel Nickel Nickel Delta P/N UG-58A/U M39012/04-0002 1113-000-N181 1113-000-N321-2 1113-000-N321-3 1113-000-A331-11 1113-000-N331-11 1113-000-N951 1113-000-N091-2 1113-000-N331-9 Panel Jack Receptacle--Solder Pot Contact Round flange (for solder or setscrew mounting) D D C (I.D.) C (I.D.) Figure 1 1 2 A B 1.25 1.25 1.13 .66 .66 .66 E dia. B A Figure 1 E dia. Dimensions C D .100 .100 .100 .175 .125 .11 B A Figure 2 Plating E Body Contact 1.50 1.25 .575 Nickel Nickel Nickel Silver (C) Gold (C) Silver (C) Delta P/N 1113-000-N911-2 1113-000-N911-5 1120-000-N831 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 19 N Receptacles DELTA ELECTRONICS MANUFACTURING Panel Jack Receptacle--Slotted Contact B D B .120 slot width dia. D C dia. slot width .075 A C Figure 1 square flange, interchangeable with BNC and TNC standard flange size) Figure 1 1 1 1 2 2 2 2 2 A .735 .735 .735 .735 .736 .736 .736 .735 .736 Dimensions B C .050 .050 .050 .050 .080 .080 .080 .080 .080 .086 .086 .086 .050 .050 .050 .050 .050 .050 A Figure 2 (11/16" D Mounting Figure Body .012/.017 .036 .007/.012 .012/.017 .012/.017 .026/.030 .020/.025 .026/.030 .012/.017 09 09 09 09 33 33 33 33 33 Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Plating Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Delta P/N (C)* (C)* (C)* (C)* (C)* (C)* (C) (C) (C) 1143-000-N091-2 1143-000-N091-3 1143-000-N091-4 1143-000-N091-9 1143-000-N330-10 1143-000-N331-17 1143-000-N331-23 1143-000-N331-54 1143-000-N331-55 *Epoxy-captivated contact. Panel Jack Receptacle--Tab Contact Tab .005/.010 thick x .120 wide D C C Tab D thick x .120 wide Figure 1 Figure 2 .384 dia. B A B A C Tab D thick x .050 wide Figure 3 (11/16" square flange, interchangeable with BNC and TNC standard flange size) B Figure 1 2 3 A .736 .736 .735 Dimensions B C .080 .080 .075 .195 .100 .050 D Mounting Figure .35 .005/.008 .004/.006 33 33 09 A Plating Body Contact Nickel Silver Silver Gold Gold Gold (C)* (C)* (C)* Delta P/N 1143-000-N330-12 1158-000-A331-12 1158-000-A091-23 *Epoxy-captivated contact. (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 20 N Receptacles DELTA ELECTRONICS MANUFACTURING Panel Jack Receptacle--Post Contact D C C .162 dia. .120 dia. D A .050 dia. B A Figure 1 B Figure 2 (11/16" square flange, interchangeable with BNC and TNC standard flange size) D .162 dia. C .120 dia. B C D .384 dia. Figure 3 A .050 dia. B A Figure 4 (1/2" square flange, interchangeable with SMA standard flange size) C .162 dia. B O-ring D .050 dia. A Figure 5 (O-ring seal on flange, 11/16" square flange, interchangeable with BNC and TNC standard flange size) Figure 1 2 2 2 3 3 4 5 5 5 A .736 .735 .735 .735 .736 .736 .814 .735 .735 .735 Dimensions B C .080 .075 .075 .075 .080 .080 .080 .075 .075 .075 .66 .125 .125 .590 .590 .590 .590 .200 .750 .375 D Mounting Figure .56 .25 .25 .705 .705 .705 .705 .450 .875 .425 33 09 09 09 33 33 05 09 09 09 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Gold (C) Silver (C) Gold (C) Gold (C)* Gold Gold (C)* Gold (C) Gold (C) Gold (C) Gold (C)* Delta P/N 1113-000-N331-28 1143-000-N091-18 1143-000-N091-30 1143-000-N091-69 1143-000-N330-18 1158-000-N331-15 1143-000-N051-2 1143-000-N091-59 1143-000-N091-73 1143-000-N091-75 *Epoxy-captivated contact. (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 21 N Receptacles DELTA ELECTRONICS MANUFACTURING Right Angle Panel Jack Receptacle D dia. D (I.D.) A C A C B B Figure 1 Figure 2 .120 dia. D dia. D A C A slot width C Figure 1 1 2 3 4 A 1.41 1.41 1.41 1.41 1.41 Dimensions B C 1.16 1.16 1.16 .830 1.17 .30 .30 .75 .56 .050 B B Figure 3 Figure 4 D Mounting Figure Body Plating Contact .101 .101 .120 .120 .020/.025 33 33 33 33 33 Nickel Nickel Nickel Nickel Nickel Silver (C) Gold (C) Silver (C) Gold (C) Silver (C) Delta P/N UG-997A/U 1115-000-N330-5 1115-000-N330-9 1115-000-N330-12 1115-000-N330-11 Dummy Receptacle B A Dimensions A B .740 .080 Mounting Figure 33 Plating Body Contact Nickel -- Delta P/N 1163-000-N330 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 22 N Receptacles DELTA ELECTRONICS MANUFACTURING Panel Plug Receptacles B dia. Figure 1 Figure 2 (Solder pot contact) (Slotted contact) A D slot width Figure 3 D slot width C C D B .120 C (I.D.) C Tab D thick x .065 wide Figure 4 (Slotted contact) A (Tab contact) B .050 dia. B A C C .162 dia. Figure 5 Figure 6 (Post contact) (Post contact) D dia. A B D B .050 dia. A A D C .120 dia. Figure 7 (Post contact) .384 dia. B Figure 1 1 2 2 2 3 4 5 6 7 7 7 A 1.10 1.10 .78 .81 .81 1.17 .81 .81 1.17 .81 .81 .81 Dimensions B C .080 .080 .080 .080 .080 .075 .080 .080 .075 .080 .080 .080 .101 .101 .050 .050 .050 .050 .100 .36 .125 .590 .330 .330 D Mounting Figure .72 .72 .012/.017 .012/.017 .026/.030 .020 .005/.008 .120 .250 1.10 .488 .488 33 33 33 33 33 09 33 33 09 33 33 33 A Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver (C) Gold (C) Gold (C) Gold (C) Gold (C)* Gold (C)* Gold (C)* Gold (C) Gold (C) Gold (C)* Gold Gold (C)* Delta P/N 1123-000-N330 1123-000-N330-4 1159-000-N330-1 1159-000-N330-13 1159-000-N331-26 1159-000-N091-4 1159-000-N331-9 1123-000-N330-2 1159-000-N091-10 1159-000-N331-6 1159-000-N330-11 1159-000-N331 *Epoxy-captivated contact. (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 23 N Receptacles DELTA ELECTRONICS MANUFACTURING Bulkhead Jack Receptacles C (I.D.) C (I.D.) .812 dia. B A .812 dia. B A Figure 1 Figure 2 (Front mount, hermetically sealed, with mounting gasket) (Rear mount, hermetically sealed, with mounting gasket) C (I.D.) C (I.D.) A 1 1 1 2 3 3 4 B A Figure 3 Figure 4 (Front mount, no gasket) (Front mount, no gasket, screw-in type for 9/16-24 tapped hole) A Dimensions B 1.62 1.62 1.62 1.53 1.25 1.25 1.25 .707 .707 .707 .919 .606 .606 .562 Figure B C Max. Panel Mounting Figure .099 .099 .099 .099 .099 .099 .099 .100 .100 .100 .250 .100 .100 .100 72 72 72 72 59 59 ** Plating Body Contact Nickel Nickel Silver Nickel Nickel Nickel Nickel Delta P/N Silver (C) Silver (C) Gold (C) Silver (C) Silver (C) Gold (C) Silver (C) UG-680/U UG-680A/U M39012/04-0001 1121-000-N728-5 1120-000-N590 1120-000-N590-4 1120-000-N591 Stripline Receptacles C holes, A dia. x B deep C holes, A dia. x B deep .750 D dia. b.c. Figure 1 1 1 1 2 A B C #2-56 .078 #2-56 #2-56 .250 .313 .250 .125 7 7 7 10 dia. b.c. F G Dimensions D E .560 .500 .560 .734 E D dia. Socket contact E dia. x F deep Figure H .120 dia. #0-80 .063 #2-56 .125 H .140 dia. G .875 dia. Figure 2 F G H Body .125 .156 .125 .010 .734 .734 .734 .816 .422 .656 .422 .125 Nickel Nickel Nickel Nickel Plating Contact Silver Silver Silver Silver Delta P/N 1156-000-N000 1156-000-N000-2 1156-000-N000-3 1157-000-N000-3 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 24 N Receptacles DELTA ELECTRONICS MANUFACTURING Component housing Delta PressMount Receptacles These connectors eliminate the need for complicated mounting hole patterns and mounting hardware. They are simply pressed into a single through hole, and the precisely-engineered knurled mounting section provides retention strength far greater than normal mating and unmating forces. Internal Circuitry An integral shoulder provides a positive stop when mounting. PressMounts can be used in packages as small as the outer diameter of the connector body. PressMount Receptacles--Jack Type .625 dia. .587 A .625 dia. Figure 1 Figure 2 (Post contact) (Tab contact) Tab B thick x .120 wide B dia. .454 .454 .25 dia. over knurl dia. over knurl A .625 dia. .587 A .25 .587 C (I.D.) Figure 3 (Solder pot contact) .120 dia. .454 .25 dia. over knurl Figure 1 2 3 Dimensions A B .110 .100 .285 Min. Panel Mounting Hole Body Plating Contact .200 .200 .200 .450 .001 dia. .450 .001 dia. .450 .001 dia. Nickel Nickel Nickel Gold (C) Gold (C) Gold (C) .050 .005/.008 .100 Delta P/N 1120-000-N911-2 1120-000-N911-3 1120-000-N911-4 PressMount Receptacles--Plug Type .95 A A Figure 1 Figure 2 (Post contact) (Tab contact) B dia. .454 Tab B thick x .120 wide .454 .25 dia. over knurl .25 dia. over knurl A .95 .95 C (I.D.) Figure 3 (Solder pot contact) .454 .120 dia. .25 dia. over knurl Figure 1 2 3 Dimensions A B .110 .100 .285 .050 .005/.008 .100 Min. Panel Mounting Hole Body Plating Contact .200 .200 .200 .450 .001 dia. .450 .001 dia. .450 .001 dia. Nickel Nickel Nickel Gold (C) Gold (C) Gold (C) Delta P/N 1124-000-N911-1 1124-000-N911-2 1124-000-N911 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 25 N Accessories DELTA ELECTRONICS MANUFACTURING Resistive Termination (Plug Type) A C (I.D.) B Resistor 50 50 51 51 51 75 1%, 1%, 5%, 5%, 5%, 1%, Dimensions B C A 1 Watt 1 Watt 1/2 Watt 1/2 Watt 1 Watt 1 Watt 1.78 1.87 1.61 1.67 1.87 1.87 .-- 5.00 3.50 .-- 3.75 5.00 .-- .144 .144 .-- .144 .144 Features No chain No chain Body Plating Contact Nickel Nickel Nickel Nickel Nickel Nickel Silver (C) Gold (C) Silver (C) Silver (C) Silver (C) Gold (C) Delta P/N 1151-000-N000-3 1151-000-N000-10 1131-000-N000 1131-000-N00A 1151-000-N000 1151-000-N000-11 Dust Caps A A C (I.D.) C (I.D.) B Figure 1 1 1 1 2 2 B Figure 1 Figure 2 (Shown with safety chain) (Shown with bead chain) A Dimensions B C .56 .56 .56 .84 .72 .91 2.25 2.25 3.75 2.50 3.50 2.50 .144 .144 .635 .170 .500 .170 Features Bead chain Bead chain Safety chain Bead chain / shorting type Bead chain Bead chain / shorting type Plating Body Contact Nickel Silver Silver Nickel Nickel Nickel -- -- -- Silver -- Silver (C) (C) Delta P/N MX-913/U M39012/25-0011 M39012/25-0012 1132-000-N00C-2 1133-000-N000 1133-000-N00C (C) in contact plating column indicates captive contact. Caps and terminations are available with other chain styles and/or resistances. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 26 N Adapters DELTA ELECTRONICS MANUFACTURING Bulkhead and Panel Mounted Jack-Jack Adapters (Connect two plugs) A Figure 1 Figure 2 (Bulkhead mount, hermetically sealed) (Panel mount) Dimensions A B Figure 1 1 1 1 2 B .875 dia. B A 1.54 1.54 1.54 2.06 1.75 Max. Panel Mounting Figure Body Plating Contact .25 .25 .25 .75 .-- 72 72 72 72 33 Nickel Nickel Silver Nickel Nickel Silver (C) Silver (C) Gold (C) Silver (C) Silver (C) .863 .863 .863 1.375 1.00 Delta P/N UG-30D/U UG-30E/U M55339/04-00030 1126-000-N728 1125-000-N330 Straight Adapters B dia. B dia. Figure 1 Figure 2 (Straight jack-jack; connects two plugs) (Straight plug-plug; connects two jacks) A A B dia. Figure 3 (Straight jack-plug; connects one plug and one jack) A Figure 1 1 2 2 3 Dimensions A B 1.75 1.75 1.59 1.59 1.56 .66 .66 .78 .78 .78 Plating Body Contact Nickel Silver Nickel Silver Nickel Silver (C) Gold (C) Silver (C) Gold (C) Silver (C) Delta P/N UG-29B/U M55339/07-00029 UG-57B/U M55339/05-00057* 1134-000-N000 * Lockwire holes in coupling nut. (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 27 N Adapters DELTA ELECTRONICS MANUFACTURING Right Angle Adapters B B B .875 dia. .92 A A Figure 2 Figure 1 (Right angle plug-jack; connects one plug and one jack) Figure 1 1 1 2 3 Figure 3 (Bulkhead mounted right angle jack-jack; connects two plugs) (Right angle plug-plug; connects two jacks) Dimensions A B 1.30 1.38 1.38 1.39 2.13 A 1.38 1.30 1.30 1.39 1.36 Max. Panel Mounting Figure Body Plating Contact .-- .-- .-- .-- .25 .-- .-- .-- .-- 72 Nickel Nickel Silver Nickel Nickel Silver (C) Gold (C) Gold (C) Silver (C) Gold (C) Delta P/N UG-27C/U UG-27D/U M55339/03-00027* 1137-000-N000 UG-202A/U * Lockwire holes in coupling nut. Tee Adapters B B B A Figure 1 A Figure 2 A Figure 3 (Tee jack-jack-jack; connects three plugs) (Tee jack-plug-jack; connects two plugs and one jack) (Tee jack-jack-plug; connects two plugs and one jack) Figure 1 1 2 2 3 Dimensions A B 1.75 1.75 1.75 1.75 2.03 1.22 1.22 1.47 1.47 1.22 Plating Body Contact Nickel Silver Nickel Silver Nickel Silver (C) Gold (C) Silver (C) Gold (C) Gold (C) Delta P/N UG-28A/U M55339/06-00028 UG-107B/U M55339/06-00001 1149-000-N001-1 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 28 N70 Cable Connectors DELTA ELECTRONICS MANUFACTURING Straight Plug--Military Clamp for Flexible Cable B dia. B dia. Figure 1 Figure 2 A A Cable Group Figure 2B, 3B 7 1 2 Dimensions A B 1.80 1.38 .69 .50 Plating Body Contact Nickel Nickel Assembly Procedure/ Trim Code Delta P/N Silver Silver UG-94A/U 1801-021-N000 C/01 A/02 Straight Jack--Military Clamp for Flexible Cable B dia. B dia. Figure 1 Figure 2 A A Cable Group Figure 2B, 3B 7 1 2 Dimensions A B 1.88 1.41 .69 .50 Plating Body Contact Delta P/N Nickel Nickel UG-95A/U 1808-021-N000 Gold Silver Assembly Procedure/ Trim Code C/08 A/02 Bulkhead Jacks--for Flexible Cable Figure 1 Figure 2 (Military clamp) (Crimp) C dia. A Cable Group Fig. 2B, 3B 7 2B, 3B 7 1 1 2 2 Dimensions A B C 1.84 1.47 1.84 1.59 .92 .92 .92 .92 .69 .50 .60 .50 B C .875 dia. (crimp sleeve) A Mounting Figure Max. Panel 72 72 72 72 .25 .25 .25 .25 Plating Body Contact Nickel Nickel Nickel Nickel Gold Silver (C) Gold Silver B .875 dia. Delta P/N Assembly Procedure/ Trim Code 1816-003-N720 1816-021-N721 1819-003-N720 1819-020-N720 C/08 A/14 B/03 B/14 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 29 N70 Receptacles DELTA ELECTRONICS MANUFACTURING Panel Receptacle--Solder Pot Contact D D .083 dia. .083 dia. C (I.D.) C (I.D.) B A A Figure 1 Figure 2 (Straight jack receptacle) (Straight plug receptacle) B .083 dia. D (I.D.) A C B Figure 3 (Right angle jack receptacle) Figure 1 2 3 A 1.13 1.10 1.41 Dimensions B C .66 .72 1.16 .062 .062 .30 D Mounting Figure Body Plating Contact .080 .080 .050 33 33 33 Nickel Nickel Nickel Gold (C) Silver (C) Gold (C) Delta P/N 1813-000-N331 1823-000-N331-1 1815-000-N330 Bulkhead Receptacle--Solder Pot Contact D max. panel C (I.D.) .812 dia. A B Figure 1 (Front mount, hermetically sealed) Figure 1 A 1.62 Dimensions B C .707 .099 D Mounting Figure .250 72 Plating Body Contact Nickel Silver (C) Delta P/N 1820-000-N728 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 30 N70 Adapters DELTA ELECTRONICS MANUFACTURING Straight Adapters B dia. B dia. Figure 1 Figure 2 (Straight jack-jack; connects two plugs) (Straight plug-plug; connects two jacks) A Dimensions A B Figure 1 2 1.75 1.59 A Plating .66 .78 Body Contact Nickel Nickel Gold (C) Gold (C) Delta P/N 1828-000-N000 1827-000-N000 Right Angle and Tee Adapters Figure 1 (Right angle jack-plug; connects one plug and one jack) B A B B Figure 1 2 3 A Figure 2 A Figure 3 (Tee jack-jack-jack; connects three plugs) (Tee jack-plug-jack; connects two plugs and one jack) Dimensions A B 1.30 1.75 1.75 1.38 1.22 1.47 Plating Body Contact Nickel Nickel Nickel Gold (C) Gold (C) Gold (C) Delta P/N 1829-000-N000 1838-000-N000 1830-000-N000 (C) in contact plating column indicates captive contact. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 31 Cable Groups DELTA ELECTRONICS MANUFACTURING Cable Group Finder Cable RG-5, 5A, B RG-6, 6A RG-8, 8A RG-9, 9A, B RG-10 RG-11, 11A RG-12 RG-13A RG-14A RG-17A RG-18A RG-21, 21A RG-22, 22A, B RG-55, 55B RG-55A RG-58, 58A, C RG-59, 59A, B RG-62, 62A, B, C RG-71, 71A, B RG-108, 108A RG-115A RG-118A RG-122 RG-126 RG-141, 141A RG-142, 142A RG-142B RG-143, 143A RG-174 RG-174DS RG-178, 178A, B RG-179A, 179B RG-180, 180A, B RG-187, 187A RG-188, 188A RG-195 RG-196, 196A RG-210 RG-212 RG-213 RG-214 RG-215 RG-217 RG-218 RG-219 RG-222 RG-223 Group 1A 1B 2A 3A 15 2B 15 3B 16 17 18 1A 28 6B 6A 5 7A 7A 7B 27 19 20 8A 21 5 6A 6B 1C 9A 10 11 9B 8B 9B 9A 8B 11 7A 1C 2A 3A 15 16 17 18 1C 6A Cable RG-225 RG-228A RG-302 RG-303 RG-304 RG-316 RG-316DS RG-393 RG-400 RG-401 RG-402 RG-405 M17/2 M17/6 M17/15 M17/28 M17/29 M17/30 M17/45 M17/73 M17/162 M17/112 M17/74 M17/75 M17/127 M17/77 M17/60 M18/84 M17/128 M17/97 M17/54 M17/95 M17/137 M17/152 M17/93 M17/129 M17/130 M17/133 M17/78 M17/165 M17/176 AT&T 735A Belden 8281 Belden 9207 Dearborn 6207 IBM 7362211 Delta Cable Groups Group 3C 20 22 23 24 9A 10 4 6A 12 13 14 1B 2B 28 5 7A 7A 27 1A 1A 1C 2A 3A 3C 3B 6A 6A 6A 7A 8A 8B 8B 9A 11 12 13 14 16 16 30 31 26 29 29 29 Group Cables 1A RG-5, 5A, 5B, 21, 21A; M17/73, /162 1 1B RG-6, 6A; M17/2 1C RG-143, 143A, 212, 222; M17/73, /112, /162 2 2A RG-8, 8A, 213; M17/74 2B RG-11, 11A; M17/6 3A RG-9, 9A, 9B, 214; M17/75 3 3B RG-13A, 216; M17/77 3C RG-225; M17/127 6 7 8 9 4 RG-393; M17/127 5 RG-58, 58A, 58C, 141, 141A; M17/28, /111 6A RG-55A, 142, 142A, 223, 400; M17/60, /84, /128 6B RG-55, 55B, 142B; M17/60, /84 7A RG-59, 59A, 59B, 62, 62A, 62B, 62C, 210; M17/29, /30, /97 7B RG-71, 71A, 71B; M17/90 8A RG-122; M17/54 8B RG-180, 180A, 180B, 195; M17/95, /137 9A RG-174, 188, 188A, 316; M17/152 9B RG-179A, 179B, 187, 187A; M17/94, /136 10 Double-Shielded RG-174, 316; M17/152 11 RG-178, 178A, 178B, 196, 196A; M17/93 12 .250" semi-rigid; RG-401; M17/129 13 .141" semi-rigid; RG-402; M17/130 14 .085" semi-rigid; RG-405; M17/133 15 RG-10, 12, 215; M17/6, /74 16 RG-14A, 217; M17/78, /165 17 RG-17A, 218 18 RG-18A, 219 19 RG-115A 20 RG-118A, 228A 21 RG-126 22 RG-302 23 RG-303 24 RG-304 25 Special 8X cable; contact factory for details. 26 Belden 8281 27 RG-108, 108A; M17/45 28 RG-22, 22A, 22B; M17/15 29 Belden 9207; Dearborn 6207; IBM 7362211 30 M17/176 31 AT&T 735A (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 32 Assembly Procedures DELTA ELECTRONICS MANUFACTURING Assembly Procedure A Washer Backnut (if supplied) 1) Trim cable jacket to dimension A. Slide backnut, washer, V-gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. Washer and/or bushing (if supplied) Contact (captive) & insulator or V-Gasket 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with step of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. 3) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Assemble rear bushing or washer (if supplied), rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. For right angle connectors with access cap, omit this step entirely. A Contact (non-captive) Braid Clamp Fold braid over C B Non-captive Contact Captive Contact Solder Solder Washer or bushing (if supplied) 4) Insert prepared cable and hardware into body and tighten backnut. For right angle connectors with access cap, solder center conductor into slot in contact and tighten access cap. Trim Codes For Assembly Procedure A Code A B C Code A B C A/01 .375 (3/8) .047 (3/64) .203 (13/64) A/20 .375 (3/8) .047 (3/64) .172 (11/64) A/02 .375 (3/8) .109 (7/64) .203 (13/64) A/21 .500 (1/2) .313 (5/16) .172 (11/64) A/03 .438 (7/16) .250 (1/4) .188 (3/16) A/22 .375 (3/8) .188 (3/16) .141 (9/64) A/04 .281 (9/32) .047 (3/64) .125 (1/8) A/23 .438 (7/16) .078 (5/64) .172 (11/64) A/05 .313 (5/16) .125 (1/8) .109 (7/64) A/24 .500 (1/2) .094 (3/32) .141 (9/64) A/06 .594 (19/32) .391 (25/64) .156 (5/32) A/25 .438 (7/16) .141 (9/64) .172 (11/64) A/07 .375 (3/8) .047 (3/64) .125 (1/8) A/26 .625 (5/8) .281 (9/32) .250 (1/4) A/08 .281 (9/32) .109 (7/64) .094 (3/32) A/27 .688 (11/16) .281 (9/32) .125 (1/8) A/09 .344 (11/32) .109 (7/64) .094 (3/32) A/28 .656 (21/32) .297 (19/64) .250 (1/4) A/10 .406 (13/32) .109 (7/64) .203 (13/64) A/29 .688 (11/16) .125 (1/8) .313 (5/16) A/11 .500 (1/2) .281 (9/32) .156 (5/32) A/30 .688 (11/16) .469 (15/32) .156 (5/32) A/12 .343 .040 .219 A/31 .700 (21/32) .453 (29/64) .250 (1/4) A/13 .375 (3/8) .125 (1/8) .156 (5/32) A/32 .313 (5/16) .078 (5/64) .188 (3/16) A/14 .355 .090 .188 (3/16) A/33 .250 (1/4) .078 (5/64) .094 (3/32) A/15 .425 .094 (3/32) .259 A/34 .250 (1/4) .062 (1/16) .109 (7/64) A/16 .328 (21/64) .094 (3/32) .188 (3/16) A/35 .837 .575 .150 A/17 .375 (3/8) .109 (7/64) .125 (1/8) A/36 .450 .250 .150 A/18 .375 (3/8) .062 (1/16) .172 (11/64) A/37 .281 .038 .188 A/19 .375 (3/8) .188 (3/16) .094 (3/32) A/38 .281 .069 .156 (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 33 Assembly Procedures DELTA ELECTRONICS MANUFACTURING Assembly Procedure B Crimp Sleeve Contact (captive) 1) Trim cable per chart. Slide crimp sleeve back onto cable. or Contact (non-captive) A B C 2) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Solder contact onto center conductor; back of contact flush with trimmed end of cable dielectric (omit this step for right angle connectors with access caps). Flare cut end of braid slightly by rotating dielectric. Solder 3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. a) For captive contact connectors, push cable in until contact snaps into insulator. b) For noncaptive contact connectors, push cable in until cable dielectric bottoms in connector. c) For right angle or tee connectors with access caps, push cable in until end of braid touches connector body shoulder, and cable center conductor rests in contact slot. Trim excess braid wires even with shoulder of body. Slide crimp sleeve forward until flush with body and crimp (see page 176 for hex die sizes). For right angle or tee connectors with access caps: Solder center conductor into contact slot, assemble insulator disc (if supplied), then press cap into body until seated or screw into place. Trim Codes For Assembly Procedure B Code A B C Code A B B/01 .320 .470 .140 B/20 .250 .375 .156 B/02 .422 .578 .172 B/21 .425 .550 .156 B/03 .406 .500 .187 B/22 .375 .500 .156 B/04 .285 .505 .140 B/23 .281 .469 .125 B/05 .335 .460 .140 B/24 .250 .700 .109 B/06 .187 .437 .219 B/25 .343 .775 .125 B/07 .422 .610 .156 B/26 .343 .437 .109 B/08 .422 .562 .219 B/27 .313 .437 .187 B/09 .313 .610 .203 B/28 .219 .271 .078 B/10 .280 .436 .187 B/29 .200 .320 .060 B/11 .430 .542 .156 B/30 .500 .650 .219 B/12 .300 .434 .156 B/31 .350 .840 .150 B/13 .300 .447 .156 B/32 .175 .260 .095 B/14 .420 .645 .187 B/33 .195 .270 .045 B/15 .300 .420 .120 B/34 .150 .250 .105 B/16 .312 .609 .125 B/35 .195 .280 .170 B/17 .250 .500 .156 B/36 .150 .325 .090 B/18 .437 .562 .109 B/37 .195 .295 .075 B/19 .343 .437 .156 B/38 .150 .225 .095 B/39 .250 .300 .135 (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com C 34 Assembly Procedures DELTA ELECTRONICS MANUFACTURING Assembly Procedure C Backnut Contact (captive) & insulator Washer or Gasket Trim Codes Code A B Contact (non-captive) A Braid Clamp Fold braid over 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with edge of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. C C C/01 .656 (21/32) .141 (9/64) .250 (1/4) C/02 .500 (1/2) .125 (1/8) .250 (1/4) C/03 .450 .136 .187 C/04 .375 (3/8) .109 (7/64) .125 (1/8) C/05 .375 (3/8) .062 (1/16) .250 (1/4) C/06 .500 (1/2) .188 (3/16) .125 (1/8) C/07 .575 .438 .094 C/08 .625 (5/8) .141 (9/64) .219 (7/32) 1) Trim cable jacket to dimension A. Slide backnut, washer, gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. B Non-captive Solder 3) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Assemble rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. Captive 4) Insert prepared cable and hardware into body and tighten backnut. For right angle connectors with access cap, solder cable center conductor to slot in contact and tighten access cap. Assembly Procedure D Backnut Contact (captive) & insulator Washer or Armor Clamp V-Gasket Contact (non-captive) A Braid Clamp Fold braid over C B 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with edge of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. Non-captive Trim Codes B 1) Slide armor clamp over cable. Push armor back to expose cable end. Slide backnut, washer (if supplied), gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. Trim cable jacket to dimension A. Code A C D/01 .375 (3/8) .047 (3/64) .250 (1/4) D/02 .500 (1/2) .188 (3/16) .219 (7/32) D/03 .344 (11/32) .047 (3/64) .219 (7/32) D/04 .313 (5/16) .047 (3/64) .172 (11/64) D/05 .625 (5/8) .281 (9/32) .250 (1/4) D/06 .313 (5/16) .062 (1/16) .109 (7/64) Solder 3) Assemble rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. Captive 4) Insert prepared cable and hardware into body and tighten backnut. Trim armor to fit between armor clamp and braid clamp. Tighten armor clamp. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 35 Assembly Procedures DELTA ELECTRONICS MANUFACTURING Assembly Procedure E Backnut C B A Contact/Insulator/ cone grip assembly 1) Slide backnut onto cable as shown. Trim cable to dimensions A and B as shown. Slit jacket to dimension C in two places, 180 apart. Trim Codes Code A B C E/01 .250 (1/4) .141 (9/64) .313 (5/16) E/02 .219 (7/32) .063 (1/16) .250 (1/4) E/03 .250 (1/4) .031 (1/32) .250 (1/4) 2) Slide cone/insulator/contact assembly under braid until braid is flush with shoulder. Solder contact to center conductor. Solder 3) Insert prepared cable and hardware into body; tighten assembly by holding nut stationary and turning body. Assembly Procedure F Backnut Washer Contact (captive), insulator, & bushing B or Trim Codes V-Gasket Code A F/01 .250 (1/4) .219 (7/32) F/02 .250 (1/4) .172 (11/64) F/03 .188 (3/16) .188 (3/16) F/04 .109 (7/64) .265 (17/64) F/05 .156 (5/32) .250 (1/4) F/06 .219 (7/32) .250 (1/4) F/07 .156 (5/32) .172 (11/64) F/08 .109 (7/64) .219 (7/32) Solder Ferrule Contact (non-captive) A 1) Trim cable per chart. Slide backnut, washer, v-gasket, and solder ferrule onto cable. Trimmed end of cable jacket should bottom on step in solder ferrule. B Solder Captive Solder Solder 2) Solder ferrule to cable jacket as shown. Retrim cable dielectric to proper length if it has extruded from soldering heat. Slide bushing and rear insulator over cable dielectric if captive contact. Solder contact onto center conductor; back of contact flush with trimmed end of cable dielectric. Non-captive 3) Insert prepared cable and hardware into body and tighten backnut. (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 36 Assembly Procedures DELTA ELECTRONICS MANUFACTURING Assembly Procedure I Body assembly Soft solder all around Cable end flush with insulator B A 1) Trim cable as shown. Remove any burrs from jacket and center conductor. Trim Codes Code A B I/01 .090 70-90 2) Insert cable into body and solder cable jacket to body, keeping end of cable flush with insulator as shown. Plug body assembly and contact shown; procedure is identical for jack connectors. Crimp Tools for Flexible Cable M22520/5-01 Frame only--P/N M22520/5-01--Use with interchangeable dies listed below. For Cable Group(s) Hex Die Size Die Set P/N Closure 2, 3, 4 .429 hex, .400 wide M22520/5-61 A 5, 6 .213 hex, .400 wide M22520/5-19 B 7 .255 hex, .400 wide M22520/5-19 A 9 .128 hex, .400 wide M22520/5-35 B 10 .151 hex, .400 wide M22520/5-37 B 11 .105 hex, .400 wide M22520/5-33 B (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 37 Mounting Figures DELTA ELECTRONICS MANUFACTURING P.C. Board Drilling Connector Flanges Panel Cutouts (Panel mounted connectors) (Bulkhead mounted connectors) A dia. typ. C dia. typ. D dia. A dia. B (CL ) typ. C (CL ) typ. B (CL ) typ. B A square Figure 4-hole flanges A B 1/2 04 05 07 08 09 10 12 18 26 27 30 32 32A 33 34 36 39 40 45 91 91A Figure 1/2 11/16 11/16 11/16 11/16 11/16 3/4 1 1 1 1 1 1 13/32 13/16 13/16 13/16 2 .375 .375 .360 .340 .500 .500 .500 .500 .500 .531 .718 .718 .718 .718 .718 .718 .812 .906 .906 .906 1.437 .250 .232 C .089 .102 #3-56 tap .136 .125 .120 .109 .136 #6-32 tap #4-40 tap .166 .136 .136* .125 .150 #6-32 tap .152 .125 .257 .067 .093 * Countersunk to .245 dia. 51 54 55 57 59 62 63 65 66 67 68 D-Hole A B .755 .630 .630 .557 .505 .442 .407 .380 .319 .255 .195 .723 .598 .583 .531 .473 .410 .362 .348 .292 .236 .176 (PCB traces are shown for illustrative purpose only, and are not representative of actual circuitry.) Coaxial connectors Figure A B C PCB01 PCB02 PCB03 PCB05 PCB06 PCB07 PCB08 .067 .045 .067 .067 .067 .045 .032 .400 .500 .300 .200 .200 .177 .100 .200 .250 .150 .100 .100 .088 .050 D .045 .045 .035 .055 .045 .045 .032 A dia. typ. .0625 typ. D dia. typ. A dia. B Double D-Hole Figure A 69 72 75 84 .755 .630 .380 .319 B (CL ) typ. .125 (CL ) C (CL ) typ. B .692 .536 .341 .278 (PCB traces are shown for illustrative purpose only, and are not representative of actual circuitry.) Twinax connectors Figure A B C PCB04 .045 .500 .250 D .045 D dia. typ. A dia. C B (CL ) A Figure 2-hole flanges Figure A B C D 92 92A 95 .223 .260 .640 .481 .481 1.015 .625 .625 1.30 .102 .102 .125 82 89 Round Hole A .255 .380 (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 38 Ordering and Warranty Information DELTA ELECTRONICS MANUFACTURING Warranty We warrant our parts to be free from defects in materials and workmanship for one year from date of purchase. During that time, we will repair or replace (at our option) any parts found to be defective. This warranty does not apply to parts which have been modified, used in conditions exceeding Delta or military specifications, or disassembled. We will not, under any circumstances, be responsible for consequential or incidental damages or installation costs. No other warranties apply, and no other liability may be assumed or extended by representatives or distributors. Returns Returns will be accepted only with a Return Authorization number issued by Delta, and are subject to inspection and acceptance upon arrival. Restocking charges will be determined prior to issuance of Return Authorization. All claims for shortages must be made within 30 days of receipt by customer. Ordering Information Orders are subject to the terms and conditions on our order acknowledgement, which may only be modified by written agreement prior to sale. Order changes, cancellation, or termination will be accepted only with written approval from Delta Electronics Manufacturing. Copyright, Trademarks, and Patents Entire contents copyright 2003, Delta Electronics Manufacturing Corporation. Reproduction rights are hereby granted for, and specifically limited to, printing or other reproduction of drawings and specifications for inclusion in specification or source control drawings, or for purchasing procedures, by Delta customers only. Heli-Grip, PressMount, and the New England Craftsmanship logo are trademarks. The Heli-Grip design is covered by U.S. and foreign patents. Delta Electronics Manufacturing Corporation 416 Cabot Street, P.O. Box 53 Beverly, MA 01915 FSCM/CAGE 00795 Catalog # Npdf 1.2 (7/09) (978) 927-1060 * FAX (978) 922-6430 * www.deltarf.com 39