(978)927-1060 • FAX (978)922-6430 •
www.DeltaRF.com
P.O. Box 53 • 416 Cabot St. • Beverly, MA 01915
N Connectors
Contents
CLICK ON ANY LINE TO GO DIRECTLY TO THE INDICATED PAGE
Navigation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specifications and interface dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Design Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ONLINE CATALOG
Cable Connectors
Straight Cable Plugs . . . . . . . . . 8
Right Angle Cable Plugs. . . . . . 11
Tee Cable Plugs . . . . . . . . . . . . 12
Straight Cable Jacks . . . . . . . . . 12
Bulkhead Cable Jacks . . . . . . . . 14
Tee Bulkhead Cable Jacks . . . . . 15
Panel Cable Jacks . . . . . . . . . . . 17
Receptacles
Panel Jack Receptacles . . . . . . . 19
Right Angle
Panel Jack Receptacles . . . . . . . 22
Panel Plug Receptacles. . . . . . . 23
Bulkhead Jack Receptacles . . . . 24
Stripline Receptacles . . . . . . . . 24
PressMount Receptacles. . . . . . 25
Accessories
Resistive Terminations . . . . . . . 26
Dust Caps. . . . . . . . . . . . . . . . . 26
In-Series Adapters . . . . . . . . . . 27
N70 (70Ωimpedance)
Cable Connectors. . . . . . . . . . . 29
Receptacles . . . . . . . . . . . . . . . 30
In-Series Adapters . . . . . . . . . . 31
Technical Information
Cable Groups . . . . . . . . . . . . . . 32
Cable Assembly Instructions . . 33
Assembly Tooling. . . . . . . . . . . 37
Mounting Figures . . . . . . . . . . 38
Ordering and Warranty . . . . . . 39
Connect Here.
Connect Here.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 2
Online Catalog Navigation Guide
We have configured this online catalog to take advantage of Acrobat navigation shortcuts (links).
However, these links are not visible on the pages— making them visible would compromise the
page’s readability.
• Clicking on any entry in the Table of Contents will take you to the indicated page.
• Shown below are the “hot spots” on all of the product pages that will take you to background
information on various connector characteristics.
• After you use a link to jump to another page, you can use the “back” arrow in Acrobat’s menu bar
to return to the page you jumped from.
• Configure Acrobat Reader to show bookmarks for a table of contents by specific characteristic
(for example, cable plugs broken out by cable attachment method).
• To find a specific part number, use Acrobat’s search feature.
In addition, the pages are formatted to fit within the margins of standard laser or inkjet printers—
no need to use the “shrink to fit” option when printing pages from Acrobat.
Click hereto go to the Table of Contents
Panel Jack—Military Clamp for Flexible Cable
Cable Fig. Dimensions Mounting Plating Delta P/N
Group ABC Figure Body Contact
1 1 1.75 .63 .75 33 Nickel Silver 1011-001-N330 A/20
2, 3 1 1.75 .63 .75 33 Nickel Silver 1011-004-N330 A/20
5, 6 2 1.16 .55 .50 07 Nickel Silver UG-291C/U A/17
Figure 1 Figure 2
C dia.
A
B
AB
C dia.
Assembly
Procedure/
Trim Code
Click here to jump to a guide to Delta cable groups.
Click here to jump to dimensions
for Delta mounting figures.
Click here to jump to information on alternate body plating.
Click here to jump to the cable
assembly procedure for this connector.
DELTA ELECTRONICS MANUFACTURING
BNC Cable Jacks
Click on the Delta logo on any page
to jump to the table of contents. Click on the page title to jump to specifications
and interface dimensions.
Click here to go to Delta’s website if your computer is configured for Web connection via Acrobat.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 3
Introduction and Specifications
General Description
Delta type N connectors are medium size, 50Ωimpedance connectors with 5⁄8"-24
threaded coupling.
They are best suited for use with cables in the range of .350" to .450" diameter, but are
available for other cables with diameters from .100" to over 1". M39012 QPL N connectors
and M55339 QPL N adapters are also included in this catalog. Our extensive line of type N
receptacles includes configurations for virtually any packaging requirement, and we can supply
any adapter or accessory you need to complete your system design.
As with our other connector series, Delta’s customer-driven design results in N series connectors
with practical and unique features that make your design and assembly process easier.
Some of these include:
•Heli-Grip cable connectors for fast, reliable assembly to flexible cable without special tooling.
•One-Step cable connectors for quick, accurate assembly to semi-rigid cable.
•PressMount receptacles (page 25) mount securely in a single round hole, saving space on
your components and reducing your housing fabrication costs.
•Panel receptacles with flange sizes to match the same hole pattern as standard SMA or
BNC/TNC connectors, letting you drill one hole pattern and mount BNC, N, SMA, TNC,
or 7/16 series connectors as needed.
•70Ωimpedance N connectors (see page 29) for matched-impedance applications.
Our N series product line is still growing, so please call if you don’t see what you need.
For adapters between N and other series, download the document DeltaABS.pdf
from our website.
Electrical:
Nominal Impedance: 50 ohms.
Frequency Range: DC–11 GHz.
Voltage Rating: 1,000 volts RMS.
Dielectric Withstanding Voltage: 2,500 volts RMS.
Insulation Resistance: 5,000 megohms.
Materials/Finishes:
Insulators: Teflon per ASTM D1710.
Male Contacts: Brass per ASTM B16.
Female Contacts: Beryllium Copper per ASTM B196.
Contact Plating: Silver per QQ-S-365, or
Gold per MIL-G-45204.
Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50.
Other Metal Parts: Brass per ASTM B16, plated:
Silver per QQ-S-365, or
Nickel per QQ-N-290.
All other specifications are in accordance with the
latest issues of MIL-PRF-39012, or MIL-A-55339, or other
applicable MIL specifications, and interfaces
are in accordance with MIL-STD-348.
N Specifications*
.158
.168
.827 dia.
max.
.119
.124 dia.
.630 dia.
min.
.330 dia.
max.
COMPENSATING
RING OPTIONAL
SLOTS REQUIRED;
DESIGN OPTIONAL.
.625-24 UNEF-2B
.177 min. full thread
Reference Plane
.016/.060
.210/.230
.398/.412
Plug Interface**
.047
.077
.336
.344 .316
.320
.625-24 UNEF-2A
.627 dia.
max.
.422 min.
.172/.202
.047/.077 .119/.124
Reference Plane
.356/.362 .187/.207
Jack Interface**
**Some proportions altered to illustrate detail.
*These specifications
are typical and may
not apply to all
connectors. Detailed
specifications for
individual connectors
are available on
request.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 4
Design Features
Plating options...................................................................................................................4
Panel receptacles with common flange sizes ...................................................................5
Type N receptacles with one-piece bodies .......................................................................5
Heli-Grip connectors for flexible cable .............................................................................6
Coupling nut options for N series plugs...........................................................................6
One-Step connectors for semi-rigid cable ........................................................................7
PressMount receptacles.....................................................................................................7
Design Features
About Delta’s Customer-Driven Design
At Delta, Customer-Driven Design isn’t just a catchy slogan. It means that we make RF
connectors that help you build your products efficiently, quickly, and cost-effectively. Because
we design for your needs, nobody else can offer you such a broad line of standard connectors,
along with an ever-growing list of innovative, user-friendly design variations like those detailed
on these pages.
These featured connector technologies grew out of real-world requirements, and have saved
our customers untold hours and dollars over the years. And there are thousands of other
special connector designs we’ve produced that we don’t have space to include in this catalog.
So if you don’t see the exact connector configuration you need, please call us—we may have
already made it. If not, we’ll work with you to provide the the connectors you need, with the
best price/performance balance in the business, and with quality and delivery that will enhance
your products and production schedules.
Plating Options for Economy and Performance
(Albaloy or nickel—available for all connector series except SMA)
Silver plating has long been standard on RF connectors with brass bodies, but its high cost
and low corrosion resistance make it less than ideal in most applications. Nickel plating is
less expensive and more durable than silver, and is standard on many of our connectors.
However, in some applications, nickel plating can introduce unwanted intermodulation
distortion, particularly on large size connectors. For these applications, we offer optional
Albaloy plating, a tin/zinc/copper composite with a bright white finish, the corrosion
resistance of nickel, and the low intermodulation distortion of silver plating.
Albaloy plating has the same composition as, and is fully compatible with, other
commercial platings designated Sucoplate®
,IP-23, White Bronze, and Tri-Alloy.
To order a Delta connector with plating other than the listed finish, substitute
A, N, or Qin the Delta part number as below:
For silver plating: 1111-111-A111.
For nickel plating: 1111-111-N111.
For Albaloy plating: 1111-111-Q111.
Note: M39012 and M55339 QPL connectors can only be supplied with the
specified plating. SMA connectors with stainless-steel bodies are available
with gold plating or passivated finish.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 5
Design Features
Does it make sense that you have to drill your components with different mounting hole
patterns whenever you need to ship them with a different connector series attached?
We didn’t think so, either.
That’s why we offer a wide range of connectors in different series with common flange
sizes and contact/insulator configurations. Now you can streamline your production
process and shorten your delivery cycle—just predrill your components with one
mounting hole pattern, and ship them with the connectors your customers require.
Flange Sizes and Available Interfaces
1⁄2" square flange (Delta mounting figure 05)—standard flange size for SMA
BNC N SMA TNC
11⁄16" square flange (Delta mounting figure 09)—standard flange size for BNC, TNC
1" square flange (Delta mounting figure 33)—standard flange size for type N
.500
square
.340
(L) typ.
C
.102 dia. typ.
1.00 square
.718
(L)
typ.
C
.125 dia. typ.
BNC N SMA TNC 7/16
These connectors are available with a wide variety of post, tab, solder pot, or slotted contacts.
Common Flange Sizes Simplify Your Production
(Available on BNC, N, SMA, TNC, and 7/16 series connectors as noted in product pages)
.687
square
.500
(L) typ.
C
.125 dia. typ.
BNC N SMA TNC
N Panel Receptacles With One-Piece Bodies
(Available for most type N 4-hole flange receptacles—contact factory for exact types)
Our in-house machining capability now includes production of type
N flange receptacles with one-piece bodies, replacing the old
machined body/stamped flange method. With no unsightly solder
joints, these connectors have enhanced appearance and strength
compared with two-piece designs. The machined flanges are flatter
than stamped flanges, and our high-speed turning centers can
produce any volume required to fill your production quantity needs.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 6
Design Features
Heli-Grip®Cable Attachment—for Flexible Cable
With their reduced parts count and rapid assembly, Delta’s Heli-Grip connectors offer significant
time savings in your cable assembly operation, without the need for dedicated crimp tools.
Heli-Grip connectors have captivated contacts, and assembly is easy—simply trim the cable,
slide the trimmed cable into the cone/insulator/contact assembly (left), solder the center
conductor to the contact, and screw the body assembly (right) onto the backend assembly.
Heli-Grip connectors have cable retention strength greater than the force required to tear the
cable braid.
(Proportions altered to illustrate detail)
Cable assembled to
hardware subassembly
Backnut; cone/contact/
insulator subassembly As assembled in connector
Standard N Heli-Grip Configurations
Straight plug—page 9j Straight jack—page 13
Bulkhead jack—page 15 Panel jack—page 17
Coupling Nut Options
N plugs can be supplied with a hex coupling nut for applications requiring plugs to be
torqued to a specific value. Please call for part numbers of specific connectors with hex
coupling nuts, which can be supplied with or without safety-wire holes.
Standard coupling nut Hex coupling nut Hex coupling nut
with lockwire holes
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 7
Design Features
One-Step Cable Attachment—for Semi-Rigid Cable
(Available for N and SMA connector series as noted in product pages)
Delta One-Step connectors for semi-rigid cable have captivated contacts and insulators
preassembled in the body assembly. With no loose parts to handle, assembly is as simple as
trimming the cable (and chamfering the cable center conductor), inserting the cable into the
body assembly, and soldering the cable jacket to the connector body.
The internal design of the body assembly automatically maintains the proper gap distance
between the center contact and the cable dielectric, ensuring the best electrical performance
and eliminating the shimming operation required by connectors with non-captive contacts.
Solder
Body assembly with
captive contact
and insulator
Cable
(Proportions altered to illustrate detail)
Standard N One-Step Configurations
Straight plug—page 10 Bulkhead jack—page 16 Panel jack—page 18
Delta PressMount Receptacles
Delta PressMount receptacles eliminate the need for complicated mounting hole patterns and
mounting hardware. They are simply pressed into a single through hole, and can be used in
component housings as small as the outer diameter of the connector. An integral shoulder
provides a positive depth stop during mounting.
Besides the standard types shown below, PressMount receptacles are available with a wide
variety of contact and insulator configurations—please call if you don’t see what you need.
Component housing
Internal
Circuitry
Knurl
Shoulder
Connector design
As mounted
on component
Standard N PressMount Receptacles
N jack
(Solder pot, tab, or
post contact—page 25)
N plug
(Solder pot, tab, or
post contact—page 25)
Straight Plug—Military Clamp for Flexible Cable
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
1 1 1.50 .75 Nickel Silver UG-18E/U A/01
1 1 1.50 .75 Nickel Silver (C)1101-001-N001 A/01
2, 3 1 1.80 .68 Nickel Silver UG-21B/U C/01
2, 3 1 1.50 .75 Nickel Gold UG-21D/U A/01
2, 3 1 1.50 .75 Nickel Gold UG-21E/U A/01
2, 3 1 1.50 .75 Nickel Gold UG-21G/U A/01
2, 3 1 1.50 .75 Nickel Silver (C)UG-1185/U A/01
2, 3 1 1.50 .75 Nickel Gold (C)UG-1185A/U A/01
2, 3 1 1.50 .75 Silver Gold (C)M39012/01-0005* A/01
5, 6 2 1.41 .50 Nickel Silver UG-536B/U A/02
5, 6 2 1.41 .50 Nickel Gold UG-536C/U A/02
5, 6 2 1.41 .50 Nickel Gold (C)1101-015-N001 A/02
7 2 1.38 .50 Nickel Silver UG-603A/U A/02
7 2 1.38 .50 Nickel Silver (C)1101-021-N001 A/02
8 2 1.41 .50 Nickel Silver (C)1101-043-N001 A/02
9 2 1.38 .50 Nickel Silver 1101-036-N000 A/02
9 2 1.38 .50 Nickel Silver (C)1101-036-N001 A/02
15 3 2.42 .75 Nickel Silver UG-941B/U D/01
15 3 2.42 .75 Silver Gold (C)M39012/01-0125* D/03
16 1 1.80 .88 Nickel Silver UG-204A/U C/02
16 1 1.80 .88 Silver Gold (C)M39012/01-0015* A/01
20 3 3.09 1.31 Nickel Silver UG-557A/U D/02
25 2 1.38 .50 Nickel Silver 1101-132-N000 A/03
Figure 1 Figure 2
A
B dia.
A
B dia.
Figure 3
(Includes armor clamp)
A
B dia.
* Lockwire holes in coupling nut.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 8
N Cable Plugs
Optional Type N Coupling Nut Examples
These designs allow the connectors to be tightened with a wrench for precise torquing of mated parts, and can be supplied
on any Delta type N plug. Please call for details of these options or any other special requirements you may have.
.812 hex
.812 hex
.033 dia.
lockwire holes (3)
13/16" hex coupling nut with lockwire holes
13/16" hex coupling nut
(C) in contact plating column indicates captive contact.
Straight Plug—Crimp Type for Flexible Cable
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
2 1 1.51 .63 Nickel Silver 1103-002-N000 B/01
2 1 1.55 .63 Nickel Gold (C)1103-002-N001-9 B/03
2 1 1.55 .60 Silver Gold (C)M39012/01B0007* B/03
2 1 1.55 .60 Silver Gold (C)M39012/01-0502* B/03
2B 1 1.55 .63 Nickel Silver 1103-070-N000 B/01
3A, 4 1 1.55 .63 Nickel Gold (C)1103-004-N001-1 B/03
3A, 4 1 1.51 .63 Nickel Silver 1103-005-N000 B/01
3A, 3C, 4 1 1.55 .60 Silver Gold (C)M39012/01B0008* B/03
3A, 3C, 4 1 1.55 .60 Silver Gold (C)M39012/01-0501* B/03
4 1 1.50 .63 Nickel Silver 1103-079-N000 B/01
5 2 1.43 .50 Nickel Silver 1103-017-N000 B/04
5 1 1.48 .50 Nickel Gold (C)1103-017-N001 B/05
6 2 1.43 .50 Nickel Silver 1103-013-N000 B/04
6 1 1.45 .50 Nickel Gold (C)1103-018-N001 B/03
6 1 1.45 .50 Silver Gold (C)M39012/01-0503* B/03
7 2 1.43 .50 Nickel Silver 1103-020-N000 B/06
7 1 1.38 .50 Nickel Gold (C)1103-020-N001 B/03
Figure 1
A
B
(crimp sleeve)
Figure 2
A
B
(crimp sleeve)
* Lockwire holes in coupling nut.
Straight Plug—Heli-Grip®for Flexible Cable
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
2, 3 1 1.50 .75 Nickel Gold (C)1101-004-N005 E/01
§5, 6§2 1.41 .50 Nickel Gold (C)1101-015-N005 E/02
RG-223 2 1.41 .50 Nickel Gold (C)1101-015-N005-1 E/02
7 2 1.38 .50 Nickel Gold (C)1101-021-N005 E/02
24 1 1.50 .75 Nickel Gold (C)1101-052-N005 E/01
26 1 1.50 .75 Nickel Gold (C)1101-108-N005 E/01
Heli-Grip®Cable Attachment
These connectors have captivated contacts and allow
rapid, easy assembly—simply trim the cable, slide into
the cone/insulator/contact assembly (left), solder the
center conductor to the contact, and screw body
assembly (right) onto cable assembly.
§Except RG-223/U.
Figure 1 Figure 2
A
B dia.
A
B dia.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 9
N Cable Plugs
(C) in contact plating column indicates captive contact.
Straight Plug—For Semi-Rigid Cable
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
12 1 1.50 .50 Nickel Silver 1101-050-N000 F/03
12 2 .96 .254 Mixed(1)Silver 1101-050-N003 ***
12 4 1.44 .254 Silver Gold (C)1101-050-A003-7 I/01
13 1 1.41 .50 Nickel Silver 1101-031-N003 F/01
13 2 .96 .143 Mixed(1)Gold 1101-031-N003-1 ***
13 2 .96 .143 Mixed(2)Gold 1101-031-K00M ***
13 3 .96 .143 Silver Gold (C)1101-031-A003-8 I/01
13 4 .96 .143 Silver Gold (C)1101-031-A003-12 I/01
14 1 1.41 .50 Nickel Silver 1101-025-N003 F/02
Figure 1
(Solder-clamp; gold-plated
ferrule, nickel-plated body)
A
B dia.
Figure 2
(Direct solder; gold-plated body, nickel(1)
or passivated(2)coupling nut)
A
B (I.D.)
Figure 4
(One-Step cable attachment, hex coupling nut)
A
B (I.D.)
.812 hex
Figure 3
(One-Step cable attachment, standard coupling nut)
A
B (I.D.)
Delta One-Step Cable Attachment for Semi-Rigid Cable
Solder
Cable
Delta “One-Step” connectors feature captivated
contacts and insulators to allow rapid, easy assembly
to semi-rigid cable—simply trim the cable jacket and
dielectric flush, chamfer the center conductor, insert
into the connector, and solder the jacket to the
connector body.
(1)Brass body and coupling nut.
(2)Stainless steel body and coupling nut.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 10
N Cable Plugs
***Contact factory for cable assembly instructions. •(C) in contact plating column indicates captive contact.
Right Angle Plug—Military Clamp for Flexible Cable
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B C Body Contact Trim Code
2, 3 1 1.47 1.88 .75 Nickel Silver (C)UG-594B/U A/01
2, 3 3 1.36 1.66 .75 Silver Gold (C)M39012/05-0101 A/07
2, 3 3 1.39 1.66 .75 Nickel Gold 1105-004-N000 A/04
5 3 1.39 2.00 .75 Nickel Gold (C)1104-032-N001 A/08
5, 6 2 1.55 1.28 .50 Nickel Silver (C)1105-015-N000 A/11
5, 6 3 1.35 1.55 .56 Nickel Silver (C)1105-015-N001 A/09
7 2 1.55 1.28 .50 Nickel Silver (C)1105-021-N000 A/11
9 2 1.55 1.28 .50 Nickel Silver (C)1105-036-N001 A/11
19 3 1.36 1.66 .75 Nickel Silver (C)1104-027-N001 A/07
Figure 1
(Mitered body) Figure 2
(Cube body with access cap)
A
B
C dia.
A
B
C dia.
Figure 3
(Cube body)
A
B
C dia.
Right Angle Plug—Crimp Type for Flexible Cable
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B C Body Contact Trim Code
2 1 1.39 1.77 .75 Nickel Silver 1107-002-N000 B/07
2 2 1.39 1.25 .— Nickel Silver (C)1107-002-N000-1 B/09
3 1 1.39 1.77 .75 Nickel Silver 1107-005-N000 B/07
2 3 1.41 2.30 .687 Nickel Gold (C)1107-002-N001-2 B/30
3 3 1.41 2.30 .687 Nickel Gold (C)1107-004-N001-2 B/30
6 3 1.41 2.25 .687 Nickel Gold (C)1107-034-N001-1 B/08
Figure 1
(Cube body) Figure 2
(Cube body with access cap)
A
B
C dia.
A
B
Figure 3
(Mitered body)
A
B
C dia.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 11
N Cable Plugs
(C) in contact plating column indicates captive contact.
Tee Plug—For Flexible and Semi-Rigid Cable
Figure 1
(Crimp type for
flexible cable)
Figure 2
(Direct solder for
semi-rigid cable)
A
B
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
2 1 1.39 2.00 Silver Silver (C)1185-002-A000 B/16
3 1 1.39 2.00 Silver Silver (C)1185-004-A000-2 B/16
6 1 1.39 1.82 Silver Silver (C)1185-013-A001 B/17
7 1 1.39 1.82 Silver Silver (C)1185-019-A000 B/17
9 1 1.39 1.82 Silver Silver (C)1185-036-A000 B/17
13 2 1.39 .90 Silver Silver (C)1185-031-A000 ***
A
B
Straight Jack—Military Clamp for Flexible Cable
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
1 1 1.56 .75 Nickel Silver UG-20E/U A/01
1 1 1.67 .75 Silver Gold (C)M39012/02-0101 A/01
2, 3 1 1.56 .75 Nickel Silver UG-23D/U A/01
2, 3 1 1.56 .75 Nickel Gold UG-23F/U A/01
2, 3 1 1.56 .75 Nickel Silver (C)UG-1186/U A/01
2, 3 1 1.56 .75 Nickel Silver (C)UG-1186A/U A/01
2, 3 1 1.67 .75 Silver Gold (C)M39012/02-0003 A/01
5, 6 2 1.41 .50 Nickel Silver 1108-015-N000 A/05
5, 6 2 1.47 .50 Nickel Silver (C)1108-015-N001 A/02
7 2 1.41 .50 Nickel Silver UG-602A/U A/02
7 2 1.27 .50 Nickel Silver 1108-000-N000-3*—
7 2 1.47 .50 Nickel Silver (C)1108-021-N001 A/02
15 3 2.25 .75 Nickel Silver UG-940B/U D/03
19 1 1.56 .75 Nickel Gold (C)1108-027-N001 A/12
22 1 1.87 .69 Nickel Gold 1108-123-N000 C/03
Figure 1 Figure 2
A
B dia.
A
B dia.
Figure 3
(Includes armor clamp)
A
B dia.
*UG-602A/U less clamping hardware.
DELTA ELECTRONICS MANUFACTURING
(978)927-1060 • FAX (978)922-6430 • www.deltarf.com 12
N Cable Plugs/Jacks
***Contact factory for cable assembly instructions. •(C) in contact plating column indicates captive contact.