DF005S - DF10S — Bridge Rectifiers
© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
DF005S - DF10S Rev. 1.0.0 1
October 2007
DF005S - DF10S
Bridge Rectifiers
Features
• Surge overload rating: 50 amperes peak.
• Glass passivated junction.
• Low leakage.
• UL certified, UL #E96005.
Absolute Maximum Ratings * Ta = 25°C unless otherwise noted
* These ratings are limiting values above which the serviceability of any semiconductor device may by impaired.
Thermal Characteristics
* Device mounted on PCB with 0.5 × 0.5” (1 3 × 13mm).
Electrical Characteristics TC = 25°C unless otherwise noted
Symbol Parameter Value Units
005S 01S 02S 04S 06S 08S 10S
VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V
VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V
VRDC Reverse Voltage (Rated VR)50 100 200 400 600 800 1000 V
IF(AV) Average Recitified Forward Current
@ TA = 40°C1.5 A
IFSM Non-Repetitive Peak Forward Surge Current
8.3ms Single Half-Sine-Wave 50 A
TSTG Storage Temperature Range -55 to +150 °C
TJOperating Junction Temperature -55 to +150 °C
Symbol Parameter Value Units
PDPower Dissipation 3.1 W
RθJA Thermal Resistance, Junction to Ambient, * per leg 40 °C/W
Symbol Parameter Value Units
VFForward Voltage, per element @ 1.0A 1.1 V
IRReverse Current, per element @ Rated VR
TA = 25°C
TA = 125°C50
500 μA
μA
I2t Rating for Fusing t < 8.35ms 10 A2s
CTTotal Capacitance, per leg
VR = 4.0v, f = 1.0MHz 25 pF
~
~
-
+
SDIP
DF005S - DF10S — Bridge Rectifiers
© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
DF005S - DF10S Rev. 1.0.0 2
Typical Performance Characteristics
Figure 1. Figure 2.
Figure 3. Figure 4.
Non -Rep e ti t iv e Sur ge Cur re nt
12 51020 50100
0
10
20
30
40
50
NUMBER OF CYCLES AT 60 Hz
FORWAR
Peak Forward Surge Current, IFSM[A]
Output Rectified C urrent
20 40 60 80 100 120 140 160
0
0.5
1
1.5
AMBIEN T TEMPERATURE ( C)
FORWARD C
º
Average Rectified Forward Current, IF[A]
Forward Characteristics
0.4 0.6 0.8 1 1.2 1.4
0.01
0.1
1
10
F ORWARD VOL TA G E ( V)
FORWARD C
T = 25 C
º
A
Puls e Width = 200μs
Forward Current, IF[A]
Reverse Characteri stics
0 20406080100120140
0.01
0.1
1
10
NO RMA LIZ ED REVERSE VOLTAGE (%)
REVERSE C
T = 100 C
º
A
T = 25 C
º
A
Reverse Current, IR[μA]
DF005S - DF10S Bridge RectifiersDF005S - DF10S
TRADEMARKS
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and
is not intended to be an exhaustive list of all such trademarks.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILI TY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LI ABILITY ARISING OUT OF
THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE
UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF
FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE
PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
ACEx®
Build it Now™
CorePLUS™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FPS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™ e-Series™
GTO™
i-Lo™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP-SPM™
Power220®
Power247®
POWEREDGE®
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
UniFET™
VCX™
Datasheet Identification Product Status Definition
Advance Information Formative or In Design This datasheet contains the design specifications for product development.
Specifications may change in any manner without notice.
Preliminary First Production This datasheet contains preliminary data; supplementary data will be pub-
lished at a later date. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves
the right to make changes at any time without notice to improve design.
Obsolete Not In Production This datasheet contains specifications on a product that has been discontin-
ued by Fairchild semiconductor. The datasheet is printed for reference infor-
mation only.
Rev. I30
© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
DF005S - DF10S Rev. 1.0.0 3
