Soft Shell Pin and Socket Connectors AMP Universal MATE-N-LOK II Connectors (Continued) Housing Components Free-Hanging or Panel Mount Rear Housing Section .250 [6.35] Centerline spacing Material -- Nylon Flammability Rating -- UL 94V-0 Related Product Data Rear Housing Section Product Specification 108-1090 Universal MATE-N-LOK II Connectors Performance Characteristics-- pages 189-190 Contacts-- page 192 Illustrations and Dimensions-- pages 193-194 Panel Cutout Recommendations-- page 195 Keying Plug-- page 196 Strain Reliefs-- page 196 Technical Documents-- pages 189 and 205-206 Other Mating Connectors Universal MATE-N-LOK Connectors -- page 176 Universal MATE-N-LOK Headers -- pages 182-183 and 185 Universal MATE-N-LOK Test Connectors -- page 185 Front Housing Section Plug Housing Cap Housing Kit Component Part Numbers Number of Circuits Plug Front 770031-1 770033-1 770035-1 770319-1 770037-1 770039-1 770041-1 770043-1 Kit 770017-1 770018-1 770019-1 770016-1 770020-1 770021-1 770022-1 770023-1 2 3 4 5 6 9 12 15 Rear 770032-1 770034-1 770036-1 770320-1 770038-1 770040-1 770042-1 770044-1 Kit 770024-1 770025-1 770026-1 -- 770027-1 770028-1 770029-1 770030-1 Cap Front 770045-1 770047-1 770049-1 -- 770051-1 770053-1 770055-1 770057-1 Rear 770046-1 770048-1 770050-1 -- 770052-1 770054-1 770056-1 770058-1 Notes: 1. Kits consist of a front and rear component. 2. Kit components can be purchased separately. Note: All part numbers are RoHS Compliant. Number of Circuits .110 [2.79] D .175 [4.45] B 2 3 Note 3 Refer to Application Specification 114-1043 4 E .100 [2.54] Note 2 A 6 12 Note 4 C .175 [4.45] 15 B .340 8.63 .340 8.63 .340 8.63 .480 12.19 .480 12.19 .480 12.19 .480 12.19 Dimensions C .095 2.41 .095 2.41 .095 2.41 .275 6.99 .275 6.99 .275 6.99 .275 6.99 D .530 13.46 .530 13.46 .530 13.46 1.030 26.16 1.030 26.16 1.030 26.16 1.030 26.16 E .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .350 8.89 .350 8.89 Universal MATE-N-LOK II Connectors .250 [6.35] Centerline 9 A .565 14.35 .815 20.70 1.065 27.05 .565 14.35 .815 20.70 1.065 27.05 1.315 33.40 Standard Density Recommended Cap Housing Panel Cutouts View is from cap entry side Front Housing Section Notes: 1. Recommended panel thickness -- .030-.090 [.762-2.286]. Panel must be punched so that housing enters panel in same direction as the punch. 2. Optional -- Do not remove this material when keying cap housing to panel. 3. Circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit housings. 4. Circuit #1 location when using panel keying with 2, 3, and 4 circuit housings. 195 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208