Panasonic New Product Introduction New PAN1740 Series Place and Play Bluetooth(R) Low Energy Module REACH COMPLIANT RoHS COMPLIANT Revolutionizing Bluetooth Low Energy with a 5mA Current Consumption in Tx or Rx! A revolution is underway in Bluetooth Low Energy to dramatically shrink power budgets for battery powered applications. Panasonic's "nanopower" family of 2nd generation BLE modules reduces transmit and receive current consumption by more than 66% when compared to the current generation of BLE devices and nearly a 90% reduction from Bluetooth Classic devices. Most significant is that these current reductions have been achieved without range reduction, without Tx power reduction and without changes to the Bluetooth specification. The PAN1740 Series is Panasonic's next generation "nanopower" Bluetooth Low Energy module with reduced form factor, significantly lower power consumption, embedded BLE stack and profile. Panasonic cost engineering lowers component count and the application BOM. This single mode Bluetooth system-on-chip module is optimized for low power and small size. The power consumption of only 5mA in Tx or Rx mode allows for the use of coin cell batteries and reduces battery requirements up to 50% when compared to current generation BLE devices . With a fully shielded case, integrated crystal oscillators and chip antenna, the 9.0 x 9.5 x 1.8 mm footprint of the PAN1740 Series makes it one of the smallest BLE modules available. The PAN1740 Series is qualified to the Bluetooth 4.0 standard - FCC, IC, CE certifications are pending. Panasonic's designer friendly Easy-to-Use (ETU) development kits reduce design efforts and critical time to market. Features Applications * Bluetooth Smart(R) Module * Tx Current @ 0dBm: 5mA * Small Footprint: 9 x 9.5 x 1.8mm * High Sensitivity: -93dbm typ. * Output Power Up to 0dbm * Embedded BLE Stack and GATT Profile * Industrial Temperature Range: -40 to 85oC * Two Internal Crystal Oscillators * Integrated Antenna * Consumer Electronics * Wireless Sensors * Cable Replacement * Instrumentation * Heart Rate Monitors * Blood Glucose Meters Technical Characteristics Parameter Value Condition Receiver Sensitivity -93 dBm typ. Ideal Signal Output Power +0 dBm typ. @ 50 Ohm Antenna Pin Power Supply 2.35 to 3.3 V Single Voltage Operation Transmit 4.9 mA GFSK Receive 4.9 mA GFSK Operating Temperature -40 to +85C Website: us.panasonic.com/industrial industrial@us.panasonic.com 1-800-344-2112 Copyright (c) 2014 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1740 Series NPI, FY13-134-XXX Block Diagram (PAN1740) Crystal 32.768 kHz DC/DC VSUPPLY Full Port Multiplexer Dialog DA14580 UART SPI USB 12C GP-ADC Quad-Decoder Wakeup Timer Crystal 16 MHz Ordering Information Part Number Description ENW-89846A1KF PAN1740 Bluetooth Low Energy Module, Integrated Antenna EVAL_PAN1740 PAN1740 Evaluation Kit, Two USB Development Modules Additional Information For more information on the PAN1740 Bluetooth Low Energy Module, visit our blog by clicking on the link below. There, you can download our new whitepaper, entitled "Moving Forward With Bluetooth Low Energy". http://www.pidtechinsights.com/2014/03/11/moving-forward-with-bluetooth-low-energy/ Website: www.panasonic.com/industrial industrial@us.panasonic.com 1-800-344-2112 Copyright (c) 2014 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1740 Series NPI, FY13-134-XXX Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: EVAL_PAN1740 ENW-89846A1KF