TND321VD Ordering number : ENA0190 ExPD (Excellent Power Device) TND321VD General Purpose Driver for PDP Sustain Pulse Drive, Motor Drive, Switching Power Supply, and DC / DC Converter Applications Features * * * * * * * * Dual inverter. Monolithic structure (High voltage CMOS process adopted). Withstand voltage of 25V is assured. Wide range of operating voltage : 4.5V to 25V. Peak output current : IO+/IO--=0.8A /1A. Fast switching time (30ns typical at 1000pF load). Fully compatible input to TTL / CMOS (VIH=up to 2.6V, at VDD=4.5 to 25V). Built-in input pull-down resistance. Specifications Absolute Maximum Ratings at Ta=25C Parameter Supply Voltage Symbol Conditions VDD VIN Input Voltage Allowable Power Dissipation Ratings Unit 0 to 25 V GND--0.3 to VDD+0.3 V 0.2 W PD max Junction Temperature Tj --55 to +150 C Storage Temperature Tstg --55 to +150 C Recommended Operating Conditions at Ta=25C Parameter Operating Supply Voltage Operating Temperature Symbol Conditions VDD Topr Ratings Unit 4.5 to 25 V --40 to +125 C Marking : DC (c) 2011, SCILLC. All rights reserved. Jan-2011, Rev. 0 www.onsemi.com Rev.0 I Page 1 of 5 I www.onsemi.com Publication Order Number: TND321VD/D TND321VD Electrical Characteristics (AC Characteristics) at Ta=25C, VDD=18V, VIN=5V Parameter Symbol Turn-On Rise Time Turn-Off Fall Time Delay Time Ratings Conditions min typ Unit max tr tf CL=1000pF CL=1000pF 35 50 ns 30 45 ns tD1 tD2 CL=1000pF CL=1000pF 30 45 ns 45 60 ns Electrical Characteristics (DC Characteristics) at Ta=25C, VDD=4.5 to 25V Parameter Symbol Logic "1" Input Voltage Logic "0" Input Voltage VIH VIL Logic "1" Input Bias Current IIN+ Logic "0" Input Bias Current IIN-VOH VOL High Level Output Voltage Low Level Output Voltage VDD Supply Current Output High Short Circuit Pulse Current Output Low Short Circuit Pulse Current Output On Resistance Ratings Conditions min VIN=VDD=25V VIN=0V --1 IO=0A IO=0A 3 0.25 V 0.1 V 4.5 mA 0.2 mA VDD=18V, PW10s, VOUT=0V VDD=18V, PW10s, VOUT=18V 0.8 A 1.0 A VDD=18V, Iload=10mA, VOUT="H" VDD=18V, Iload=10mA, VOUT="L" 0.15 2.9 0.75 A IO+ IO-- 4 0.07 1 Isupp 0.65 1 : INA 2 : OUTA 3 : OUTB 4 : INB 5 : GND 6 : VDD 7 : VDD 8 : VDD SANYO : VEC8 Block Diagram VDD IN A 1.0 6 5 2 V 100 VDD--0.1 2.3 2.8 0.25 1 0.8 VDD=10V, VIN=3V, (both inputs) VDD=10V, VIN=0V, (both inputs) ROUT 0.3 V 40 unit : mm (typ) 7012-006 7 Unit max 2.6 Package Dimensions 8 typ OUT GND Rev.0 I Page 2 of 5 I www.onsemi.com 11 16.5 6 10 TND321VD Switching Time Test Circuit VDD=18V 4.7F 0.1F TND321VD INPUT A OUTPUT A 1000pF INPUT B OUTPUT B 1000pF INPUT RISE AND FALL +5V TIMES=5ns +0.4V INPUT 90% 10% tD1 +18V tD2 90% 90% INVERTING OUTPUT 10% 0V 10% tf tr tr -- Tc 60 40 30 20 10 0 --50 40 35 30 25 20 0 50 100 Case Temperature, Tc -- C 15 --50 150 35 30 25 20 100 150 IT05640 VDD=18V VIN=5V CL=1000pF 90 80 Delay Time, tD2 -- ns 40 50 tD2 -- Tc 100 VDD=18V VIN=5V CL=1000pF 45 0 Case Temperature, Tc -- C IT10418 tD1 -- Tc 50 Delay Time, tD1 -- ns VDD=18V VIN=5V CL=1000pF 45 Turn-Off Fall Time, tf -- ns Turn-On Rise Time, tr -- ns 50 tf -- Tc 50 VDD=18V VIN=5V CL=1000pF 70 60 50 40 30 20 15 10 --50 10 0 50 100 Case Temperature, Tc -- C 150 0 --50 IT05632 Rev.0 I Page 3 of 5 I www.onsemi.com 0 50 100 Case Temperature, Tc -- C 150 IT05644 TND321VD IO(+) -- Tc VDD=18V 1.0 0.8 0.6 IO(--) -- Tc 1.4 Output "Low" Short Circuit Pulse Current, IO(--) -- A Output "High" Short Circuit Pulse Current, IO(+) -- A 1.2 VDD=18V 1.2 1.0 0.8 0.6 0.4 --50 0 50 100 0.4 --50 150 Case Temperature, Tc -- C 50 100 IT10420 IO(--) -- VDD 1.6 VIN=5V VIN=5V 1.4 Output "Low" Short Circuit Pulse Current, IO(--) -- A 1.4 Output "High" Short Circuit Pulse Current, IO(+) -- A 150 Case Temperature, Tc -- C IO(+) -- VDD 1.6 0 IT10419 1.2 1.0 0.8 0.6 0.4 0.2 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0 5 10 15 20 25 Supply Voltage, VDD -- V 30 0 10 15 20 30 IT11994 tf -- VDD 60 VIN=5V CL=1000pF 70 25 Supply Voltage, VDD -- V tr -- VDD 80 5 IT11993 VIN=5V CL=1000pF Turn-Off Fall Time, tf -- ns Turn-On Rise Time, tr -- ns 50 60 50 40 30 20 40 30 20 10 10 0 0 0 5 10 15 20 25 Supply Voltage, VDD -- V 30 0 10 15 20 25 Supply Voltage, VDD -- V tD1 -- VDD 60 5 IT11995 tD2 -- VDD 160 VIN=5V CL=1000pF 30 IT11996 VIN=5V CL=1000pF 140 Delay Time, tD2 -- ns Delay Time, tD1 -- ns 50 40 30 20 120 100 80 60 40 10 20 0 0 0 5 10 15 20 25 Supply Voltage, VDD -- V 30 0 IT11997 Rev.0 I Page 4 of 5 I www.onsemi.com 5 10 15 20 Supply Voltage, VDD -- V 25 30 IT11998 TND321VD PD -- Ta Allowable Power Dissipation, PD -- W 0.25 0.20 0.15 0.10 0.05 0 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- C 160 IT11999 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals," must be validated for each customer application by customer's technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affi liates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affi rmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. % !" "& ' " " !"# $% & !'#'"# !!'((' ! ) * $%+ & !!'" "'- ) * & . " & ./&++000 + & (" #-! "-! *& !'#'"# !!'((' # ) * $%+ ! ! & , . " #$&www.onsemi.com $%+ & ''##' ! Rev.0 I Page 5 of 5 I www.onsemi.com * 2/ / 1 TND321VD/D