CATALOG HEX400A HEXSEAL (R)& (R) E SEEL Hermetic Environmental Sealing Boots for Switches & Potentiometers US (R) C UL Recognized Component vin Pro g Ground s(R) World's Most e h Ho T ur m nviron ents Ar E eO ile st SWITCH SEALING SPECIALISTS Table of Contents Why Hostile Switch Environments Need Protection . . . . . . . . . . . . . . . . 3 Typical Applications - Features & Benefits . . . . . . . . . . . . . . . . . . . . . . . 4 Cross References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6 N.S.N. Series to APM P/N & Military Specifications . . . . . . . . . . . . . . . . . 6 Anatomy of a Hermetic Sealing Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Performance Levels to Choose From. . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Matching Colors Available Technical References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9 Toggle Switch Boots Specifications & Selection (Full & Half) . . . . . . . 10 Armored Toggle Switch Boots ( Full). . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 EMI/RFI Shielded Toggle Switch Boots (Full) . . . . . . . . . . . . . . . . . . . . . 11 Back-of-Panel Mounted Toggle Switch Boots. . . . . . . . . . . . . . . . . . . . . 11 Pushbutton Switch Boots (Full) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13 Armored Pushbutton Switch Boots (Full). . . . . . . . . . . . . . . . . . . . . . . . 13 Armored Versions EMI/RFI Shielded Pushbutton Boots (Full) . . . . . . . . . . . . . . . . . . . . . . . 13 Back-of-Panel Mounted Pushbutton Switch Boots . . . . . . . . . . . . . . . . 13 Indicator & Illuminated Pushbutton Switch Boots. . . . . . . . . . . . . . . . . 14 2-Way Radio Handset Switch Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Rotary-Shaft Seals for Switches & Potentiometers . . . . . . . . . . . . . . . . 15 EMI/RFI Shielded Rotary-Seals for Switches & Potentiometers . . . . . . 15 Locking Rotary-Shaft Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 EMI/RFI Suppression Versions Sealed Switches Bushing Sealing Washers* . . . . . . . . . . . . . . . . . . . . . 16 Rocker Switch Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Economy Switch Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Installation Instructions - Bushing Adaptors. . . . . . . . . . . . . . . . . . . . . 19 Metric Size Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 IQ Series Toggle Switch Boots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Circuit Breaker Boots - See Catalog CB200 *Designed Specifically to Protect Mounting Hole Seal Integrity of Hermetically Sealed Switches (c) APM Hexseal Corp. 2009 www.apmhexseal.com 2 800.498.9034 HEXSEAL(R) & E-SEEL(R) SEALING BOOTS -- LIFE SUPPORT SYSTEMS FOR SWITCHES Why hostile switch environment protection is needed How HEXSEAL(R) & E-SEEL(R) Boots protect Unsealed switches are internally susceptible to damage and shorting from water, lubricants, dust, dirt, sand, salt spray, corrosive atmospheres, fungus and other damaging contaminants. Even factory sealed switch function is susceptible to ice and dust build-up. And, all switch panelmounting cutouts are vulnerable to contaminant seepage including spilled soft drinks, coffee, etc. APM's UL-recognized HEXSEAL(R) and E-SEEL(R) sealing boots provide complete and reliable, costeffective, long-term protection. Working closely with switch, potentiometer and circuit breaker manufacturers and users for more than 60 years, APM has developed an extensive line of tough, pliant silicone rubber (other materials available for specific environments) panel seals that function harmoniously with the switch's manual and automatic operation and position status viewing. Our panel seals are UL 50 tested and Recognized. In this age of recalls and expensive field servicing, installing a HEXSEAL boot is the most effective and least expensive way to protect and guard against switch, circuit breaker and potentiometer failures. Toggle, Pushbutton, Rocker, Rotary Actuated Sealing Boots NEMA Mounted Enclosure Example - Switch & Circuit Breaker Boots Heavy duty, armored, stainless steel, mushroom head boot Pushbutton style front-of-panel mounted switch boot Digital Panel Meter custom cover Lever style back-of-panel mounted circuit breaker boots Toggle style front-of-panel mounted switch boots Lever style front-of-panel mounted sealing boots Lever style back-of-panel mounted circuit breaker boot Pushbutton style front-of-panel mounted switch boot Rocker style front-of-panel mounted circuit breaker boots Color Matching All standard EMI/RFI boots feature a knitted Monel shield Standard colors are black and gray. Boots can be color-matched to panel/function coding. www.apmhexseal.com 3 800.498.9034 Typical Applications REMOTE HEXSEAL (R) boots protect switch, potentiometer & circuit breaker mechanisms from degradation due to harsh environments such as salt air/water, oils, dust and ice. EXTREME HEXSEAL(R) boots will protect switches and keep them functioning to temperatures down to -94F (-70C). * Marine instrument panels * Military equipment and vehicles * Food processing equipment * Air conditioning systems * Heat pumps * Off-road construction equipment * Machine tool controls * Spas/hot tubs * Commercial laundry equipment * Construction elevator controls * Waste treatment system controls * Chemical plant process controls * Paint spraying equipment * Industrial machinery * Medical electronic equipment * Ground support equipment * Electronic/electrical instrument control panels * Emergency power equipment * Outdoor compressor/pump controls * Transport refrigeration systems * Automotive diagnostic equipment * Lighting control centers * Commercial refrigeration systems * Or any application requiring environmental protection for switches. Learn how others apply HEXSEAL(R) Switch Boots - visit our website "Sealing Solutions" application notes. RUGGED HEXSEAL(R) boots are used for controls protection in industrial, manufacturing and processing plants -- hostile conditions which are dusty, dirty, greasy and corrosive. RELIABLE Surgery rooms and food processing plants require frequent wash downs. Their switches benefit from HEXSEAL(R) IP66-68 Rated boots by maintaining dry, clean reliable performance. Features & Benefits * Designed and made in USA ... to insure high, consistent quality with local full tech service backup. * Choose precise boot color for color matching ... to match panel and/or delineate function - identification. * Exclusive UL-Recognized HEXSEAL(R) & E-SEEL(R) Boots ... facilitate easier "agency approval" of the equipment in which they are used. No other competitive seals in the world have these approvals. * DFARS compliant * RoHS compliant ... per document 2002/95/EC * Patented perimeter sealing rib ... seals the switch/circuit breaker panel-mounting cutout, preventing contaminant seepage. * Third party inspection ... UL regularly inspects our facilities and products. * Toggle actuated boots feature secondary inner seal ... to protect against contaminant entry in the event the upper chamber portion is punctured. And, also protects against differential pressure. (See figure 4.) * Military Specifications ... most HEXSEAL(R) Boots are produced to meet MIL-DTL-5423 (see product pages specification charts). * All toggle and pushbutton boots feature high-strength rubber-to-metal bond ... cross-linking adhesion assures rubber will not separate from the mounting nut. * Time Tested ... since our original patents and for more than 60 years, millions of HEXSEAL(R) Boots reliably function in hostile conditions throughout the world. * Pre-lubricated (optional) half-toggle and full-toggle boots ... assure easier installation on large diameter actuators. * Transparent RUBRGLAS(R) (indicators) rugged silicone rubber material ... resists tearing and most hostile environmental contaminants. Retains tactile feel, will not discolor, yellow, crack or dry out due to UV/aging. www.apmhexseal.com * Custom design requirements welcome ... in addition to standard products described in this catalog, APM provides technical design assistance with fast, economical prototyping. 4 800.498.9034 -- UNSEALED SWITCHES CROSS REFERENCES (Partial list -- consult factory for additional listings for these and other manufacturers) Toggle Switches APM Hexseal P/N* Carlingswitch Cutler Hammer E-Switch Gaynor Siemens Boots Your choice of... Sensata Honeywell ITT (C&K) APEM Eaton Toggle Switches I & G Series with 52, 63, or 73 style toggle actuator F Series with 22, 62, 63, or 73 style toggle actuator Full-toggle boot: H Series (15/32-32 Thread) with 63 or 73 100 Series style toggle actuator N1030 W/T7 IN1030 C Series actuator IQ1030 with 52 or 73 style toggle actuator C1131/27 100 Series C1131/28 110/216 Series with W/T8 21, 22, 52, 63, / 73 or actuator style toggle actuator Half-toogle ( Model Numbers: 110, 111, boot: 112, 160, 216, 316, & 516) (15/32-32 Thread) D Series N1030B DK/EK Series C1132/20 8690K1/K2 73xxK Series through 76xxK Series 82xxK Series 83xxK Series AP12 Series AP112 Series (Requires APM adt Bushing 2500/1/5, 15/32-32 to 3/8-32) 6600 Series 7000 Series 7100 Series 7200 Series W31 Series NT Series (Non-locking Actuator) B1/B2 Series (Snapak) (Requires APM boot with 1/2-32 threaded insert) 9000 Series 9100 Series 9200 Series 8510 - 8512 Series 8520 - 8522 Series 8526 - 8528 Series 8566 - 8568 Series 8530 - 8532 Series 8533 - 8535 Series 8500 - 8502 Series 8570 - 8572 Series 7000 -T & T1 Series (15/32-32 Thread) ST2 Series 9000 -T & T1 Series (15/32-32 Thread) A3-200 Series A3-210 Series 8836 - 8838 Series 8843 - 8845 Series 8866 - 8869 Series with 32, 72, or 73 style toggle actuator Locking Toggle Switches APM Hexseal P/N* Boots Locking Toggle Boots: (15/32-32 Thread) 1132/31 C1132/26 Rotary Switches Honeywell Eaton Locking Toggle Switches 8536 - 8538 Series 8503 - 8505 Series 8573 - 8575 Series 11TW1-2 Series 11TW1-3 Series 11TW1-8 Series 12TW1-2 Series 12TW1-3 Series 12TW1-8 Series 8505A3-213 Series 8505A3-209 Series 2LT1 Series 8836 - 8838 Series 8843 - 8845 Series 8855 Series 8866 - 8869 Series Rocker Switches APM Hexseal P/N Compatible with these Rocker Switch Manufacturers (Partial List) APM Hexseal P/N* Rotary Shaft Seals 1/8 (.125) shaft 388L, RA10L, RA20L, RV4L, RV6L, 308L, 309L 1/8 (.125) shaft 1/8 (.125) shaft 388N, 389N, 392, 308N, 309L, RA10N, RA20N, RV4N, RV6N 71A, 71MA, 71AF, 71MAF, 71BT, 61M, 61S (.125 shaft), 71 (.125 shaft), 08, 09 1/4 (.250) shaft 63K, 63R Pushbutton Switches APM Hexseal P/N* Eaton/Arrow Hart - 2600 Series C1113/66 Carlingswitch #621 Pushbutton Boots C1113/70 Carlingswitch RSC Series C1113/71 Carlingswitch M Series Sensata R11 Eaton/Heinemann LC-1 Siemens W-33 Carling LTI6 Eaton 7835 K 12A, 7836 K 11B 8411/K7/K8/K12, 8418/K2/K12 8432, 8433, 7193/K101 8943/K28/K29, 8980/K202 7228K2, 7227K2, 7229K2 Pushbutton boots: (15/32-32 Thread or 7/16-28 Thread) NC3030, C1231/42 Eaton Compliant www.apmhexseal.com Pushbutton boots: (15/32-32 Thread or 7/16-28 Thread ) N3030 C1231/41 Carling Gaynor Siemens NKK Pushbutton Switch Series Sensata R21 RoHS *For metric sizes consult factory. H - CL Series 73, 308, 309, 380C3, 600EN N9063x1/4 1/2-32 thd. (M5423/09-06) C1113/63 Oslo S Series Oslo S Series 1/4 (.250) shaft N9040x1/8 1/4-32 thd. (M5423/09-03) Eaton/Arrow Hart - 2600 Series C1213/53 C1213/60 1/4 (.250) shaft 19, 24, 50,51, 5000, 71B, 71MB, 71BF, 71MBF, 62A, 62V, 62D, 62F, 62R, 61A, 61B, 61C, 61S (.250 shaft), 61K, 61R, 61Z, 25, 25L, 71 (.250 shaft), 42, 43, 44, 54, 53, 57, 59 N9030x1/8 3/8-32 thd. (M5423/09-01) Consult Factory Carlingswitch M Series Eaton/Heinemann LC-2 Rotary Switch Series 50 std, 51 std, 56 std., 26, 51 N9030x1/4 3/8-32 thd. (M5423/09-02) C1113/62 C1113/75 Honeywell-Clarostat STD. 1/8 (.125) shaft N9042x1/8 1/4-28 thd. C1111/7 C1113/80 Grayhill 8440 8411 K5/K13 8418 K1/K11 8448 K1/K2 8943 K28/K29 16-3P, 170/172 110/316P, 641 6611, 6612 6616, 6617 7000, 7100 W58 - 4 W58 - 1 MB2000 SB 265 SCB - 2A Carling Siemens Honeywell APEM C&K "P" P26 P27 W58 - 4 W58 - 1 W58 Series (15/32-32 Thread or 7/16-28 Thread) 2PB Series (15/32-32 Thread) 300 Series (With T1 option) 8500M 8500S 8500T NOTE: 7/16-28 thread needs to be requested where required for proper fit. M12 thread needs to be requested where required for proper fit as well. 5 800.498.9034 CROSS REFERENCES -- UNSEALED SWITCHES (Partial list -- consult factory for additional listings for these and other manufacturers) (Continued) Toggle Switches APM Hexseal P/N* Eaton Carling Gaynor PUSHBUTTON BOOTS Pushbutton boots: (15/32-32 Thread or 7/16-28 Thread) NC3030 C1231/42 Siemens NKK Honeywell APEM ITT (C&K) 2PB Series (15/32-32 Thread) 300 Series (With T1 option) 8500M 8500S 8500T Pushbutton Switch Series 7835 K 12A, 7836 K 11B, 8411/K7/K8/K12, 8418/K2/K12, 8432, 8433, 7193/K101, 8943/K28/K29, 8980/K202, 7228K2, 7227K2, 7229K2 16-3P 170/172 110/316P 641 8440 8411 K5/K13 8418 K1/K11 8448 K1/K2 8943 K28/K29 "P" P26 P27 Pushbutton boots: (15/32-32 Thread or 7/16-28 Thread ) N3030 C1231/41 6611, 6612, 6616, 6617, 7000, 7100 MB2000 SB 265 SCB - 2A W58 - 4 W58 - 1 W58 - 4, W58 - 1 W58 Series (15/32-32 Thread or 7/16-28 Thread) *For metric sizes consult factory. Meets Military Specifications** SEALED SWITCHES Panel Bushing Washer APM Hexseal P/N APEM SEALING WASHERS Compatible Switch Bushing 15/32-32 Honeywell Eaton ITT (C&K) Sealed Toggle Switches ST1-1KM4 & M5 Series ST1-2KM4 & M5 Series ST1-3KM4 & M5 Series ST1-4KM4 & M5 Series ST1-5KM4 & M5 Series 60064 ST2-1KM4 & M5 Series Diameter .677" ST2-2KM4 & M5 Series Thickness .120" ST2-3KM4 & M5 Series ST2-4KM4 & M5 Series ST2-5KM4 & M5 Series ST2-6KM4 & M5 Series 60225 Diameter .665" ST2-7KM4 & M5 Series Thickness .110" ST2-8KM4 & M5 Series 8510 - 8512 Series 8520 - 8522 Series 11TW1-2 Series 8526 - 8528 Series 11TW1-3 Series 8566 - 85 68 Series 11TW1-8 Series 8530 - 85 32 Series (With Suffex D, F, G) 8536 - 85 38 Series 8533 - 8535 Series 12TW1-2 Series 8500 - 8502 Series 12TW1-3 Series 8503 - 8505 Series 12TW1-8 Series (With Suffex D, F, G) 8570 - 8572 Series 8573 - 8575 Sereis 11ST Series A3-209 Series 1TL1 Series A3-210 Series 2TL1 Series 8836 - 8838 Series 4TL1 Series 8843 - 8845 Series 8866 - 8869 7000 Series T and T1 Miniature Toggle Switches Cross Reference N.S.N. Series to APM Part Numbers Series Item Description 53055306530953105320532553305340592559305975599962106220- Self-Sealing Fasteners - Screws Self-Sealing Fasteners - Bolts Self-Sealing Fasteners - Bolts Switch Sealing Boots Self-Sealing Fasteners - Rivets Switch Sealing Boots Switch Sealing Boots Circuit Breaker Boots Circuit Breaker Boots Switch Sealing Boots Switch Sealing Boots EMI/RFI Suppression Switch Sealing Boots Incandescent Lamp Filters Incandescent Lamp Filters www.apmhexseal.com RoHS Compliant 6 Government Designation APM Part Number Government Designation APM Part Number M5423/01-01 M5423/01-02 M5423/02-01 M5423/03-01 M5423/04-01 M5423/05-01 M5423/05-02 M5423/06-01 M5423/06-02 M5423/06-03 M5423/06-04 M5423/07-01 M5423/07-02 M5423/07-03 M5423/07-04 M5423/07-05 M5423/07-06 M5423/07-07 M5423/07-08 M5423/07-09 M5423/07-10 M5423/07-11 M5423/07-12 M5423/09-01 M5423/09-02 M5423/09-03 M5423/09-04 M5423/09-05 M5423/09-06 N-1030 IN1030RFI N-1030B 2030-B N-5030 N-5030L N-5030R 3070 3075 3073 3077 N-3030 NC-3030 NH-3030 N-3040 NH-3030S N-3030RFI NC-3030RFI NH-3030RFI N-3040RFI NH-3030SRFI N-3030-2513 NC-3030-2513 N-9030-1/8 N-9030-1/4 N-9040-1/8 N-9060-1/4 N-9065-3/8 N-9063-1/4 M5423/09-07 M5423/09-08 M5423/09-09 M5423/09-10 M5423/09-11 M5423/09-12 M5423/09-14 M5423/10-01 M5423/10-02 M5423/10-03 M5423/11-01 M5423/12-A9 M5423/13-01 M5423/13-02 M5423/13-03 M5423/14-01 M5423/14-02 M5423/14-03 M5423/14-04 M5423/14-05 M5423/14-06 M5423/14-07 M5423/14-08 M5423/15-01 M5423/15-02 M5423/15-03 M5423/16-01 M5423/16-01 N9030 1/8 RF1 N9030 1/4 RF1 N9040 1/8 RF1 N9060 1/4 RF1 N9065 x 3/8 RF1 N9063 1/4 RF1 N9033 1/4 RF1 N-5040G N-5040R N-5040 N-5032B 1112/7 HE1076 HE1077 HE1075/3 HE1040 HE1035 HE1070 HE1080 HE1015 HE1020 HE1050 1113/26 1211/13 1211/14 1211/31 60225 60064 **APM's policy is to manufacture our HEXSEAL(R) sealing boots as defined by the requirements of MIL-Spec MIL-DTL-5423 which we regard as the standard for the switch, circuit breaker and potentiometer industry. These requirements were formulated based on our original patent. DFARS material is standard on all boots. Cage Code: 97539 800.498.9034 Anatomy of a Hermetic Sealing Boot The cut-a-way of the boot shown contains an integral secondary seal (Fig. 1) that provides additional protection against differential pressure (inside equipment vs atmospheric) that compresses/seals the toggle-actuator. The secondary chamber also creates a second-barrier should the top half be breached or compromised in any way. All HEXSEALS and E-SEELS also feature our patented flange sealing rib to prevent leakage from seeping past the mounting hole. Two mounting methods are offered. Our standard bonded nickel-plated brass mounting-nut which replaces the switches original exterior mounting-nut (which is discarded) and an optional method that uses a bonded aluminum IQ Concentro-NutTM (Fig. 2) that fits over the original switch exterior mounting nut. The Concentro-Nut option is ideal for maintenance servicing applications where minimum switch disturbance is desirable. The switch mounting holes on hermetically sealed switches also need environmental panel protection from possible contaminant seepage, i.e., moisture, dust, spilled coke and coffee, etc. For this reason, APM has developed a bonded silicone rubber-stainless steel switch bushing seal (Fig. 3). This special seal, specifically designed for hermetically sealed switches, is superior to ordinary O-rings or washers and meets the stringent requirements of MIL-DTL-5423/16-01, MS 25196, and is a UL recognized component. Protects an Unsealed Switch Fig. 1 IQ-1030 Single-piece design for toggle, pushbutton, rocker or rotary styles, in any color (See page 20) Bonded CONCENTRONUT -- fits over switch nut High tear-strength silicone rubber with actuation-compatible tactility Nautilus(R) design protective chamber with secondary inner seal Patent No. 7,964,812 Fig. 2 Sealed switches require panel cut-out protection ... Molded-in mounting nut cross-linked to silicone sheath exterior Bushing seal for protection of hermetically sealed switches Patented perimeter sealing rib seals mounting hole and protects behindpanel components. No O-ring required. Fig. 3 Mounting hole 3 Performance Levels to Choose From SNAP-SEALS(R) E-SEELS(R) HEXSEALS(R) GOOD BETTER BEST * Commercial Grade * * Industrial Grade * * Military Grade * * Neoprene rubber * Two-piece design * -65F to +300F (-53C to +148C) temperature range * Suitable for some commercial and consumer applications including lowcost appliances and tools * UL-recognized component for US & Canada * High tear-strength silicone rubber (other materials available) * Single-piece construction * -80F to +400F (-62C to +204C) temperature range * Suitable for industrial and commercial applications 7 * High tear-strength silicone rubber per A-A-59588, Class 3B (other materials available) * Single-piece design * -94F to +400F (-70C to +204C) temperature range * Suitable for military and industrial applications * UL-recognized component for US & Canada Technical References SURVIVING HOSTILE CONTROL SYSTEM ENVIRONMENTS There is an IP-rated UL-recognized environmental sealing boot expressly designed for selected control components (e.g., switches, circuit breakers, potentiometers, panel meters) that mates with and will provide a number of benefits consistent with design considerations that comply with MILDTL-5423 specifications. Originally designed for U.S. military naval applications -- rugged handling (with and without gloves), corrosive atmospheres, lubricant contact, frequent wash-downs -- these sealing boots have repeatedly proven their battle-tested worthiness. By supporting all the major manufacturers of switches, potentiometers, and circuit breakers, the same protection and reliability are available for a wide spectrum of commercial and industrial switches through the APM HEXSEAL(R) and E-SEEL(R) sealing boot system. The following reference data and cross reference charts should be helpful in making your selection, however please do not hesitate to contact our sales support department for assistance. electrical enclosure's performance, standards-making organizations such as NEMA, UL, CSA, and IEC have established various standards (Table 1). Use of NEMA ratings does not require independent testing. Compliance is left to the manufacturer. On the other hand, UL conducts an independent evaluation of the submitted product. Tests are performed either at UL's laboratories or witnessed by UL engineers at the manufacturer's location. In addition, UL requires follow-up inspections (which may include testing) to assure adherence to prescribed materials and manufacturing procedures. These ratings provide a quantitative measure of an enclosure's ability to operate in the environment in which it will be used. Each rating defines the degree of protection against rain, snow, sleet, wind-blown dust, hosedown, corrosive agents, and occasional submersion. While the detailed wording of ratings from standard to standard varies, each is based on similar application descriptions and performance expectations (Table 2). For example, an enclosure meeting UL Standard 50, Type 6 ratings (and similarly NEMA Standard No. 250, Type 6) is designed for indoor and outdoor use. It provides the degree of protection against hosedown, icing, dust, and the entry of water during temporary submersion at the limited depth required for this rating. Enclosure Ratings To cost-effectively satisfy this application diversity, manufacturers of electrical/electronic equipment enclosures offer a range of products which provide varying degrees of environmental protection. In the interest of "standardizing" an Table 2. NEMA Enclosure Types Table 1. Selected Electrical Enclosure Standards Type * National Electrical Manufacturers Association NEMA Standards Publication No. 250, "Enclosures for Electrical Equipment" * National Electrical Manufacturers Association NEMA Standards Publication No. ICS6, "Enclosures for Industrial Controls and Systems" * Underwriters Laboratories Inc. UL 50, "Standard for Safety, Enclosures for Electrical Equipment" * Underwriters Laboratories Inc. UL 508, "Standard for Safety, Industrial Control Equipment" * Canadian Standards Association CSA Standard C22.2 No. 94 "Industrial Control Equipment for Use in Ordinary (Non-Hazardous) Locations" * International Electrotechnical Commission, IEC 60529 (Ed. 2.1 b:2001) "Degree of Protection Provided by Enclosures (IP code)" www.apmhexseal.com Intended Use and Description for Electrical Equipment 1 .........Indoor use primarily to provide a degree of protection against limited amounts of falling dirt. 2 .........Indoor use primarily to provide a degree of protection against limited amounts of falling water and dirt. 3 .........Outdoor use primarily to provide a degree of protection against rain, sleet, windblown dust and damage from external ice formation. 3R.......Outdoor use primarily to provide a degree of protection against rain, sleet, and damage from external ice formation. 3S.......Outdoor use primarily to provide a degree of protection against rain, sleet, windblown dust and to provide for operation of external mechanisms when ice laden. 4 .........Indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, hose-directed water and damage from external ice formation. 4X.......Indoor or outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, hose-directed water and damage from external ice formation. 5 .........Indoor use primarily to provide a degree of protection against settling airborne dust, falling dirt, and dripping noncorrosive liquids. 6 .........Indoor or outdoor use primarily to provide a degree of protection against hose-directed water, and the entry of water during occasional temporary submersion at a limited depth and damage from external ice formation. 6P.......Indoor or outdoor use primarily to provide a degree of protection against hose-directed water, the entry of water during prolonged submersion at a limited depth and damage from external ice formation. 12 12K.....Indoor use primarily to provide a degree of protection against circulating dust, falling dirt, and dripping noncorrosive liquids. 13 .......Indoor use primarily to provide a degree of protection against dust, spraying of water, oil, and noncorrosive coolant. 8 800.498.9034 Nearest Equivalent IP Code Hexseals(R) and E-Seels(R) for: UL Recognized Ratings (to Std UL 50)* 1 IP 20 Toggle Boots IP 22 Types 1, 2, 3, 4, 4X 5, 6, 6P, 12, 12K, 13 IP 66 / IP 68 2 3 & 3S IP 55 Pushbutton Boots IP 24 Types 1, 2, 3, 4, 4X 5, 6, 6P, 12, 12K, 13 IP 66 / IP 68 3R 4 & 4X IP 66 Rocker Switch Boots IP 53 Types 1, 2, 3R, 5, 12, 12K, 13 IP 55 5 UL/NEMA Rating 6 IP 67 6P IP 68 12, 12K & 13 IP 54 A dual IP code rating indicates protection against both water jets and water submersion. Rating a product for water immersion ("7" or "8" second digit) does NOT guarantee compliance against water jets from equipment hose down or equal in-use conditions. IEC has no equivalents to UL/NEMA enclosure types 7, 8, 9, 10, or 11 *These ratings are based on standardized tests. APM recommends that the user review the actual installation for product suitability. APM welcomes the opportunity to work with the user to assist in finding the most cost-effective sealing solution. IEC enclosure protection requirements are defined in IEC 60529, Degree of Protection Provided by Enclosures (IP Code). This standard defines protection against hazardous contact by personnel and by entry of solids and liquids. Requirements for protection against corrosion and other in-use conditions are covered by the IEC standard for the overall product or by requirement specified by the user. Within this context, Hexseals(R) and E-Seels(R) would have the following Maximum IP Rating: IP CODE IEC 60529 DEGREES OF ACCESS TO HAZARDOUS PARTS, FIRST CHARACTERISTIC NUMERAL IEC 60529 DEGREES OF PROTECTION AGAINST WATER INGRESS, SECOND CHARACTERISTIC NUMERAL First Characteristic Numeral: With Respect to Solid Foreign Objects IP Second Characteristic Numeral: With Respect to the Harmful Ingress of Water IP 0 Non-protected 0 Non-protected 1 Protected against solid foreign objects 50 mm diameter 1 Protected against vertically falling water drops 2 2 Protected against solid foreign objects 12.5 mm diameter Protected against vertically falling water drops when enclosure tilted up to 15 3 3 Protected against solid foreign objects 2.5 mm diameter Protected against spraying water 4 Protected against splashing water 5 Protected against water jets 6 Protected against powerful water jets 7 Protected against the effects of temporary immersion in water 8 Protected against the effects of continuous immersion in water 4 Protected against solid foreign objects 1.0 mm diameter 5 Dust-protected (Dust shall not penetrate in quantity to interfere with satisfactory operation of the apparatus or to impair safety) 6 Dust-tight (No ingress of dust) www.apmhexseal.com IP Rating* 9 800.498.9034 Toggle Switch Boots HEXSEAL(R) and E-SEEL(R) toggle switch boots are molded from a high tear-strength silicone rubber (other materials available for specific environments) bonded to a built-in mounting nut. Each encloses the base of the protruding switch bushing and forms a watertight and dust-tight seal against the front panel surface. SPECIFICATIONS Material ........................HEXSEALS: Silicone rubber conforms to A-A-59588, Class 3B, GR 50 (unless otherwise specified). E-SEELS: Silicone rubber polymer type ASTM D 1418 Mounting Nut ..............HEXSEALS: Brass, nickel-plated E-SEELS: Brass, black-oxide Temperature Range....HEXSEALS: -94F to +400F (-70C to +204C) E-SEELS: -80F to +400F (-62C to +204C) Enclosure Protection..NEMA/UL/ULC Types 1, 2, 3, 3S, 3R, 4, 4X, 6P, 12, 13; IEC IP66/IP68 Pressure Range ..........Exceeds 15 psi internal and 1500 psi external (N5032B: 10 psi) Operational Life ..........100,000 actuations (minimum) Shelf Life .....................Excess of 25 years Resistant to.................Salt spray, sunlight, ozone, weather, fungus, and most acids and lubricating oils Military Specs*............Most HEXSEALS meet MIL-DTL-5423. (See listing on page 6) Agency Recognition...UL & ULC Recognized Component to UL Std. 50 Installation...................Please see installation instructions on page 19 Operator Chamber HEXSEAL(R) & E-SEEL(R) Silicone Rubber Boot Single Piece Nautilus Design Secondary Inner Seal (as shown) Molded-in Mounting Nut* Panel Sealing Rib (eliminates need for O-ring) Panel *APM's policy is to manufacture our HEXSEAL(R) sealing boots as defined by the requirements of MIL-Spec MILDTL-5423 which we regard as the standard for the switch, circuit breaker and potentiometer industry. These requirements were formulated based on our original patent. *For I.Q. Surround-Nut option, see back cover. For metric sizes, see page 20. Full-Toggle Boot with Integral Secondary Inner Seal - IP66/68 Rated FIGURE 2 FIGURE 3 N-5030 N-5030L N-5030R N-5030S N-1030 N-1030 1 2-32 C1131/27 Gray Gray Gray Gray Gray Gray Black Full-Toggle Boots (with constant I.D.) - IP66/68 Rated Max. Toggle A Thread Height Throat B C Military Size Above or I.D. Height Flat Part Bushing Number (in.) in. mm in. mm in. mm M6 x 0.75 .37 .116 2.95 .562 14.30 .352 9.00 -- 15 32-32NS-2B .437 .210 5.35 .625 15.88 .625 15.88 -- M12 x 1 .668 .234 5.95 .859 21.83 .625 15.88 -- 15 32-32NS-2B .66 .219 5.55 .844 21.44 .625 15.88 -- 15 32-32NS-2B .66 .256 6.50 .844 21.44 .625 15.88 -- 15 32-32NS-2B .90 .219 5.55 1.093 27.77 .625 15.88 -- 15 32-32NS-2B 1.08 .390 9.92 1.328 33.37 .625 15.88 -- 15 32-32NS-2B .925 .300 7.62 1.110 28.19 .625 15.88 -- 1 2-32NS-2B .66 .219 5.55 .844 21.44 .625 15.88 -- 1 2-32NS-2B .66 .256 6.50 .844 21.44 .625 15.88 -- 5 8-32UNS-2B .78 .187 4.76 .844 21.44 .750 19.05 -- 15 32-32NS-2B .71 .219 5.55 .937 23.80 .625 15.88 -- *Other colors available. Please consult factory. Mounting nut material: Aluminum 1 4-40NS-2B 15 32-32NS-2B 1 2-32NS-2B 15 32-32NS-2B Toggle Diameter Accommodated (in.) .062-.188 .115-.240 .115-.240 .115-.240 A Throat or I.D. in. .047 .109 .109 .109 mm 1.19 2.77 2.77 2.77 B Height in. .250 .437 .437 .437 mm 6.35 11.10 11.10 11.10 C Flat in. .375 .625 .625 .625 Military Part Number mm 9.53 15.88 15.88 15.88 M5423/11-01 M5423/02-01 -- -- * * * * * * * Figure 2 APM Boot Part Number 1131/25 1131/33 1131/40 IN-1030 1131/31 1131/26 N-1002 50154 IN-1030 1 2-32 1131/32 1131/23 C1131/28 Color* Black Gray Black Gray Gray Gray Gray Gray Gray Black Gray Black Half-Toggle Boots (toggle actuator protrudes) - IP66/68 Rated Thread Size HEXSEAL Color* E-SEEL APM Boot Part Number Figure 1 APM Boot Part Number N-5032B N-1030B N-1030B1 2-32 C1132/20 HEXSEAL Max. A Toggle Thread Height Throat B C Military Size Above or I.D. Height Flat Part Bushing Number (in.) in. mm in. mm in. mm 1 4-40NS-2B .31 .104 2.64 .422 10.72 .375 9.58 M5423/04-01 1 4-40NS-2B .37 .062 1.53 .500 12.70 .375 9.52 M5423/05-01 1 4-40NS-2B .28 .062 1.58 .390 9.91 .375 9.52 M5423/05-02 1 4-40NS-2B .50 .062 1.58 .594 15.08 .375 9.52 -- 15 32-32NS-2B .66 .219 5.55 .844 21.44 .625 15.88 M5423/01-01 1 2-32NS-2B .66 .219 5.55 .844 21.44 .625 15.88 -- 15 32-32NS-2B .71 .219 5.55 .937 23.81 .625 15.88 -- *Other colors available. Please consult factory. Material conforms to A-A-59588 Gr. 25 E-SEEL Compliant * * * * * * * * * * * * Figure 3 Color* Gray Gray Gray Black E-SEEL FIGURE 1 RoHS HEXSEAL HOW TO ORDER Specify APM boot part number and, if necessary, the appropriate bushing adaptor part number (please see page 19). Switch Housing Switch Housing * * * * *Other colors available. Please consult factory. DIMENSIONS FOR REFERENCE ONLY. Current dimensional drawings can be viewed on our website and CAD drawings can also be downloaded. www.apmhexseal.com 10 800.498.9034 Armored Full Toggle Boots - IP66/68 Rated A Throat or I.D. in. .219 B Height mm 5.55 in. .875 Figure 4 C Flat mm 21.44 in. .625 Military Part Number APM Boot Part Number -- N-1030A mm 15.88 Color Gray * E-SEEL Max. Toggle Thread Height Size Above Bushing (in.) 15 32-32NS-2B .66 HEXSEAL FIGURE 4 Nickel plated brass cap bonded to boot. EMI/RFI Shielded Full Toggle Boots - IP66/68 Rated 1 4-40NS-2B 15 32-32NS-2B 1 2-32NS-2B 1 4-40NS-2B 1 4-40NS-2B A Throat or I.D. in. .062 .219 .219 .062 .062 mm 1.58 5.55 5.55 1.58 1.58 B Height in. .500 .844 .844 .390 .594 C Flat mm 12.70 21.44 21.44 9.90 15.08 in. .375 .625 .625 .375 .375 mm 9.52 15.88 15.88 9.52 9.52 Figure 5 Military Part Number APM Boot Part Number -- M5423/01-02 -- -- -- N-5030L RFI IN-1030 RFI IN-1030 RFI 1 2-32 N-5030R RFI N-5030S RFI Color* Gray Gray Gray Gray Gray * * * * * E-SEEL Thread Size Max. Toggle Height Above Bushing (in.) .36 .66 .66 .28 .50 HEXSEAL FIGURE 5 *Other colors available. Please consult factory. All standard EMI/RFI boots feature a knitted Monel shield. RFI/EMI shielded boots have an operational life of 15,000 actuations (minimum) FIGURE 5a Sealed Switch Panel Cut-Out Sealing Bushing - IP66/68 Rated 60064 60225 Figure 5a APM Part Number Compatible Switch Bushing Washer Diameter Washer Thickness Color Conforms to* 60064 60225 15/32-32 0.677" 0.660" 0.120" 0.105" Gray Meets MIL-B-5423/16-01, MS25196, UL & ULC Recognized Component *APM's policy is to manufacture our HEXSEAL(R) sealing boots as defined by the requirements of MIL-Spec MIL-DTL-5423 which we regard as the standard for the switch, circuit breaker and potentiometer industry. These requirements were formulated based on our original patent. SEE PAGE 16 FOR FULL DETAILS Back-of-Panel Mounted Toggle Switch Boots Full Toggle Boot inch .750 mm 19.05 Military Part Number APM Boot Part Number Color* -- 2030 Gray * Half Toggle Boot (Toggle Actuator Protrudes) A Throat or I.D. D B Distance Height Between Mtg. Holes inch mm inch mm inch mm .093 2.38 .500 12.70 1.813 46.04 *Other colors available. Please consult factory. Width inch .750 mm 19.05 Figure 7 C Clearance Boot Hole Diameter inch mm .510 12.95 Military Part Number APM Boot Part Number Color* HEXSEAL FIGURE 7 Width C Clearance Boot Hole Diameter inch mm .510 12.95 HEXSEAL D B Distance Height Between Mtg. Holes inch mm inch mm inch mm .315 7.91 .938 23.82 1.813 46.04 *Other colors available. Please consult factory. M5423/03-01 2030B Gray * RoHS DIMENSIONS FOR REFERENCE ONLY. Compliant Current dimensional drawings can be viewed on our website and CAD drawings can also be downloaded. www.apmhexseal.com 11 E-SEEL Figure 6 A Throat or I.D. 800.498.9034 E-SEEL FIGURE 6 Sealing Boots for Pushbutton-Actuated Switches HEXSEAL(R) and E-SEEL(R) pushbutton boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut (other materials available for specific environments). Each encloses the base of the protruding switch bushing and forms a watertight and dust-tight seal against the front panel surface. SPECIFICATIONS Material ........................HEXSEALS: Silicone rubber conforms to A-A-59588, Class 3B, Grade 50 unless otherwise specified. E-SEELS: Silicone rubber polymer type ASTM D1418 Mounting Nut ..............HEXSEALS: Brass, nickel-plated E-SEELS: Brass, black-oxide Temperature Range....HEXSEALS: -94F to +400F (-70C to +204C) E-SEELS: -80F to +400F (-62C to +204C) Enclosure Protection..NEMA/UL/ULC Types 1, 2, 3, 3S, 3R, 4, 4X, 6P, 12, 13; IEC IP66/IP68 Pressure Range ..........Exceeds 15 psi internal and 1500 psi external Operational Life ..........100,000 actuations (minimum) Shelf Life .....................Excess of 25 years Resistant to.................Salt spray, sunlight, ozone, weather, fungus, and most acids and lubricating oils Military Specs*............Most HEXSEALS meet MIL-DTL-5423. (See listing on page 6) Agency Recognition...UL & ULC Recognized Component to UL Std. 50 Installation...................Please see installation instructions on page 19 HEXSEAL(R) & E-SEEL(R) Silicone Rubber Boot Single Piece Design Molded-in Mounting Nut Panel Sealing Rib (eliminates need for O-ring) Panel *APM's policy is to manufacture our HEXSEAL(R) sealing boots as defined by the requirements of MIL-Spec MILDTL-5423 which we regard as the standard for the switch, circuit breaker and potentiometer industry. These requirements were formulated based on our original patent. Switch Housing HOW TO ORDER For metric sizes, see page 20. Full Pushbutton Boots - IP66/68 Rated FIGURE 9 C A B Flat inch mm .250 6.35 .250 6.35 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .437 11.11 .500 12.70 .500 12.70 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .750 19.05 .625 15.88 .625 15.88 C I.D. inch mm .125 3.18 .120 3.18 .188 4.76 .125 3.18 .188 4.76 .188 4.76 .125 3.18 .156 3.97 .300 7.60 .300 7.60 .422 10.72 .422 10.72 .422 10.72 .422 10.72 .422 10.72 .422 10.72 .422 10.72 .422 10.72 .422 10.72 .515 13.10 .422 10.72 .422 10.72 Military Part Number -- SCL6303A-03 M5423/10-01 -- M5423/10-03 M5423/10-02 -- -- -- -- -- -- M5423/07-01 M5423/07-11 M5423/07-02 M5423/07-12 M5423/07-03 M5423/07-05 -- M5423/07-04 -- -- B O.D. inch mm .641 16.27 .766 19.45 .641 16.27 .641 16.27 .641 16.27 .641 16.27 C I.D. inch mm .320 8.11 .375 9.53 .320 8.11 .320 8.11 .320 8.11 .320 8.11 Military Part Number -- -- -- -- -- -- B Flat inch mm .625 15.88 .625 15.88 .625 15.88 C I.D. inch mm .344 8.73 .344 8.73 .344 8.73 Military Part Number -- -- -- APM Boot Part Number Color* 1231/17 N5045 N5040G 1231/32 N5040 N5040R 1231/31 1231/27 1231/8 1231/35 NC3030 7 16-28 NC3030 7 16-32 N3030 N3030-2513 NC3030 NC3030-2513 NH3030 NH3030S NC3030H N3040 C1231/41 C1231/42 Gray Gray Gray Gray Gray Gray Gray Gray Gray Clear Clear Gray Gray Clear Gray Clear Gray Gray Gray Gray Black Black IP66/68 Rated B Thread Size FIGURE 10 3 8-27NS-2B 15 32-32NS-2B 3 8-24NF-2B 3 8-27NS-2B 3 8-27NS-2B 3 8-32NEF-2B Max. Plunger Height inch mm .330 8.38 .400 10.14 .330 8.38 .330 8.38 .330 8.38 .330 8.38 A inch .609 .719 .609 .609 .609 .609 mm 15.48 18.26 15.48 15.48 15.48 15.48 Mounting nut material: Aluminum Thread Size 7 16-28UNEF-2B 7 16-32UN-2B 15 32-32NS-2B A inch .797 .797 .797 mm 20.24 20.24 20.24 Color* 1221/12 1221/15 C1221/22 C1221/21 C1221/21 4 C1221/23 Gray Gray Clear Black Clear Clear APM Boot Part Number 7 16-28 NC3030FL NC3030FL 7 16-32 NC3030FL * * * * * * * * * * * * * * * * * * * * * * Figure 9 APM Boot Part Number IP66/68 Rated Max. Plunger Height inch mm .313 7.94 .313 7.94 .313 7.94 * * * * * * Figure 10 Color* Gray Gray Gray * * * *Other colors available. Please consult factory. DIMENSIONS FOR REFERENCE ONLY. Current dimensional drawings can be viewed on our website and CAD drawings can also be downloaded. RoHS Compliant www.apmhexseal.com 12 800.498.9034 E-SEEL mm 5.70 7.54 7.94 13.49 7.94 7.94 13.49 9.13 16.60 16.60 18.26 18.26 13.89 13.89 18.26 18.26 13.89 13.89 18.65 15.48 13.89 18.26 HEXSEAL A inch .226 .297 .313 .531 .313 .313 .531 .359 .653 .653 .719 .719 .547 .547 .719 .719 .547 .547 .734 .609 .547 .719 HEXSEAL Aluminum insert 8-40 NS-2B 8-40 NS-2B 1 4-32NS-2B 1 4-32NS-2B 1 4-40NS-2B 1 4-40NS-2B 1 4-40NS-2B 5 16-32UNEF-2B 3 8-27NS-2B 3 8-32NEF-2B 7 16-28UNEF-2B 7 16-32UN-2B 15 32-32NS-2B 15 32-32NS-2B 15 32-32NS-2B 15 32-32NS-2B 1 2-32NS-2B 1 2-32NS-2B 1 2-32NS-2B 5 8-24NEF-2B 15 32-32NS-2B 15 32-32NS-2B Max. Plunger Height inch mm .118 3.00 .188 4.76 .203 5.16 .453 11.51 .141 3.57 .203 5.16 .344 11.51 .212 5.41 .545 13.80 .545 13.80 .438 11.11 .438 11.11 .281 7.14 .281 7.14 .438 11.11 .438 11.11 .281 7.14 .188 4.76 .469 11.91 .281 7.14 .281 7.14 .438 11.11 E-SEEL Thread Size Figure 8 HEXSEAL FIGURE 8 E-SEEL Specify APM boot part number and, if necessary, the appropriate bushing adaptor part number (please see page 19). Panel-Mounted Full Pushbutton Boots - IP66/68 Rated 5 8-27NS-2A 5 8-24NEF-2A 5 8-27NS-2A 5 8-24NEF-2A A inch .844 .844 .844 .844 B O.D. inch mm .875 22.23 .875 22.23 .875 22.23 .875 22.23 mm 21.44 21.44 21.44 21.44 C Inside Thread 1 2-32NS-2B 1 2-32NS-2B 1 2-32NS-2B 1 2-32NS-2B Military Part Number M5423/06-01 M5423/06-03 M5423/06-02 M5423/06-04 Figure 11 APM Boot Part Number 3070 3073 3075 3077 Color* Gray Gray Gray Gray * * * * E-SEEL Outside Thread PlungerBushing Height mm inch .438 11.12 .438 11.12 .688 17.47 .688 17.47 HEXSEAL FIGURE 11 *Other colors available. Please consult factory. Inactive for new designs. Thread Size 7 16-28NS-2B 7 16-32UN-2B 15 32-32NS-2B 1 2-32NS-2B B Flat A Height inch mm .547 13.89 .547 13.89 .547 13.89 .547 13.89 inch .625 .625 .625 .625 mm 15.88 15.88 15.88 15.88 C Throat inch mm .250 6.35 .250 6.35 .250 6.35 .250 6.35 Military Part Number -- -- -- -- APM Boot Part Number 7 16-28 N3030B N3030B 7 16-32 N3030B NH3030B Figure 12 HEXSEAL Half-Pushbutton Boots (Pushbutton Actuator Protrudes) - IP66/68 Rated Color* Clear Clear Clear Clear E-SEEL FIGURE 12 * * * * *Other colors available. Please consult factory Armored Pushbutton Boots - IP66/68 Rated 15 32-32NS-2B 15 32-32NS-2B A inch .984 .984 mm 25.00 25.00 B Flat inch mm .750 19.05 .750 19.05 Figure 13 C I.D. inch mm .422 10.72 .422 10.72 Military Part Number -- -- APM Boot Part Number Color HEXSEAL Thread Size Plunger Height mm inch .438 11.11 .438 11.11 1238/1 SS 1238/5* SS * * E-SEEL FIGURE 13 *P/N 1238/5 features a 11/4" diameter actuator button. Stainless steel housing with silicone boot. EMI/RFI Shielded Full Pushbutton Boots - IP66/68 Rated 15 32-32NS-2B 15 32-32NS-2B 1 2-32NS-2B 1 2-32NS-2B 5 8-24NEF-2B 1 2-32NS-2B A inch .547 .719 .547 .547 .609 .734 mm 13.89 18.26 13.89 13.89 15.48 18.65 B Flat inch mm .625 15.88 .625 15.88 .625 15.88 .625 15.88 .750 19.05 .625 15.88 C I.D. inch mm .422 10.72 .422 10.72 .422 10.72 .422 10.72 .516 13.10 .422 10.72 Military Part Number M5423/07-06 M5423/07-07 M5423/07-08 M5423/07-10 M5423/07-09 -- Figure 14 APM Boot Part Number Color* N3030RFI NC3030RFI NH3030RFI NH3030SRFI N3040RFI NC3030HRFI Gray Gray Gray Gray Gray Gray HEXSEAL Thread Size Plunger Height inch mm .281 7.14 .438 11.11 .281 7.14 .188 4.76 .281 7.14 .469 11.91 E-SEEL FIGURE 14 * * * * * * *Other colors available. Please consult factory. All standard EMI/RFI boots feature a molded knitted Monel shield. EMI/RFI shielded pushbutton boots have an operational life of 15,000 actuations (minimum) Back-of-Panel Mounted Pushbutton Boots Full Pushbutton Boots FIGURE 16 C Width inch .750 .750 mm 19.05 19.05 Military Part Number APM Boot Part Number Color -- -- 3050 3051 Clear Clear * * Half Pushbutton Boots (Pushbutton Actuator Protrudes) D A B C Hole Height O.D. Throat Locations inch mm inch mm inch mm inch mm .578 14.68 .531 13.49 .156 3.97 1.813 46.04 Part numbers in this group conform to A-A-59588 Gr. 50. Width inch .750 mm 19.05 Figure 16 Military Part Number APM Boot Part Number Color -- 3050B Clear DIMENSIONS FOR REFERENCE ONLY. Current dimensional drawings can be viewed on our website and CAD drawings can also be downloaded. 13 www.apmhexseal.com E-SEEL B O.D. E-SEEL D Hole Locations inch mm inch mm inch mm inch mm .906 23.02 .531 13.49 .453 11.51 1.813 46.04 .399 10.13 .438 11.11 .359 9.13 1.813 46.04 Part numbers in this group conform to A-A-59588 Gr. 50. A Height HEXSEAL Figure 15 HEXSEAL FIGURE 15 * RoHS Compliant 800.498.9034 Indicator & Illuminated Pushbutton Switch Seals HEXSEAL(R) indicator and lighted pushbutton switch boots are molded from RUBRGLASTM, APM's proprietary transparent silicone rubber formulation, bonded to a threaded metal insert. Each encloses the base of the protruding indicator or lighted pushbutton switch bushing and forms a watertight and dust-tight seal against the front panel surface. RUBRGLAS(R) Seals - IP66/68 Rated A Width B Height Figure 17 C Boot O.D. Fits Indicator Military Part Light # mm inch mm inch mm inch Number 11 16-32NS-2B 1.000 25.40 .750 19.04 .712 18.08 MS-25041 -- 11 16-32NS-2B 1.000 25.40 1.000 25.40 .712 18.08 -- -- 13 16-32NS-2B 1.125 28.58 .812 20.64 .843 21.43 -- -- 7 8-32NS-2B 1.125 28.58 .812 20.64 .858 21.79 -- -- .850-24NS-2B 1.125 28.58 .812 20.64 .838 21.28 -- -- RUBRGLASTM seals have an operational life of 30,000 actuations (minimum), and a pressure rating of 15 psi internal/external. Thread Size C B APM Boot Part Number Color HEXSEAL FIGURE 17 4082 4086 4080 4085 4088 Clear Clear Clear Clear Clear * * * * * Note: See page 20 for example of custom designed seals for lighted pushbutton switches. A RoHS Compliant DIMENSIONS FOR REFERENCE ONLY. Colorizing Incandescent Lamp Filters Available APM HEXSEAL also offers a broad range of silicone colorizing filters for miniature incandescent lamps. These easy-to-install filters turn a white/clear lamp into a colored indicator. Ask for SiliKrome(R) catalog SK100. Handset Switch Boots Ideal for wireless communications applications, HEXSEAL(R) handset switch boots are engineered to rugged specifications, withstanding a minimum of half a million actuations. RoHS Compliant SPECIFICATIONS Material: Boot: Silicone rubber. Conforms to A-A-59588 Gr. 50 Temperature Range: -94F to +400F (-70C to +204C) Shelf Life: Excess of 25 years. Operational Life: 500,000 actuations, minimum. Resistant to: Salt spray, weather, sunlight, ozone and most acids Military Specifications*: Most Hexseal products meet MIL-DTL-5423. For listing, see page 6. FIGURES 18, 19 & 20 DESCRIPTION A Microphone M52, Handset H33/PT Handset H189 Handset H250 *Other colors available. Please consult factory. inch .652 .406 .576 B mm 16.5 10.4 14.6 inch 2.248 1.300 .808 D Hole Locations C mm 57.1 33.0 20.5 inch 2.148 1.250 .718 mm 54.5 31.7 18.2 inch 2.594 3.380 1.500 FIGURE 18 Microphone M52, Handset H33/PT Part No. 1211/13 mm 66.0 85.9 38.0 inch .612 .700 .687 mm 15.5 11.3 17.5 Military Part Number APM Part Number Color* M5423/15-01 M5423/15-02 M5423/15-03 1211/13 1211/14 1211/31 Gray Black Black * * * FIGURE 19 Handset H189 Part No. 1211/14 B C B C www.apmhexseal.com A A D 3.661 D 2.828 FIGURE 20 Handset H250 Part No. 1211/31 B C A DIMENSIONS FOR REFERENCE ONLY. Width HEXSEAL *APM's policy is to manufacture our HEXSEAL(R) sealing boots as defined by the requirements of MIL-Spec MIL-DTL-5423 which we regard as the standard for the switch, circuit breaker and potentiometer industry. These requirements were formulated based on our original patent. 14 D 1.953 800.498.9034 Rotary Shaft Seals for Switches & Potentiometers HEXSEAL(R) and E-SEEL(R) rotary shaft seals are molded from a high tear-strength silicone rubber (other materials available for specific environments) bonded to a built-in mounting nut. Each seal surrounds the rotary shaft and forms a watertight and dust-tight seal against the shaft and front panel surface. SPECIFICATIONS Material ........................HEXSEALS: Silicone rubber conforms to A-A-59588, Class 3B, Gr. 60 unless otherwise specified. E-SEELS: Silicone rubber polymer type ASTM D1418 Mounting Nut ..............HEXSEALS: Brass, nickel-plated E-SEELS: Brass, black-oxide Temperature Range....HEXSEALS: -94F to +400F (-70C to +204C) E-SEELS: -80F to +400F (-62C to +204C) Enclosure Protection..NEMA/UL/ULC Types 1, 2, 3, 3S, 3R, 4, 4X, 6P, 12, 13; IEC IP66/IP68 Pressure Range ..........Exceeds 15 psi internal and 1500 psi external Operational Life ..........100,000 actuations (minimum) Shelf Life .....................Excess of 25 years Resistant to.................Salt spray, sunlight, ozone, weather, fungus, and most acids and lubricating oils Military Specs*............Most HEXSEALS meet MIL-DTL-5423. (See listing on page 6) Agency Recognition...UL & ULC Recognized Component to UL Std. 50 Installation...................Please see installation instructions on page 19 *APM's policy is to manufacture our HEXSEAL(R) sealing boots as defined by the requirements of MIL-Spec MILDTL-5423 which we regard as the standard for the switch, circuit breaker and potentiometer industry. These requirements were formulated based on our original patent. HOW TO ORDER For metric sizes, see page 20. Specify APM boot part number and, if necessary, the appropriate bushing adaptor part number (please see page 19). Rotary Shaft Seals - IP66/68 Rated 1 4-28NF2B 1 4-32NEF-2B 3 8-32NEF-2B 3 8-32NEF-2B 3 8-32NEF-2B 3 8-32NEF-2B 15 32-32NS-2B 1 2-32NS-2B 5 8-24NEF-2B 5 8-24NEF-2B 3 8-32NEF-2B A Shaft Size inch mm .125 3.18 .125 3.18 .125 3.18 .188 4.78 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .375 9.53 .500 12.70 .250 6.35 B Height inch mm .219 5.56 .219 5.56 .219 5.56 .219 5.56 .219 5.56 .359 9.12 .219 5.56 .219 5.56 .219 5.56 .219 5.56 .219 5.56 C Flat inch .375 .375 .500 .500 .500 .500 .625 .625 .750 .750 .500 Military Part Number -- M5423/09-03 M5423/09-01 -- M5423/09-02 -- M5423/09-04 M5423/09-06 M5423/09-05 -- -- mm 9.53 9.53 12.70 12.70 12.70 12.70 15.88 15.88 19.05 19.05 12.70 APM Boot Part Number Color* N9042 x 1 8 N9040 x 1 8 N9030 x 1 8 N9030 x 3 16 N9030 x 1 4 N9033 x 1 4 N9060 x 1 4 N9063 x 1 4 N9065 x 3 8 N9065 x 1 2 C1332/40 Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Black E-SEEL Thread Size** Figure 21 HEXSEAL FIGURE 21 * * * * * * * * * * * *Other colors available. Please consult factory. **Metric thread sizes available; consult factory. RFI/EMI Shielded Rotary Shaft Seals - IP66/68 Rated Locking Rotary Shaft Seals - IP66/68 Rated A B Shaft Size Height Thread Size inch mm inch mm 1 4-32NS-2B .125 3.18 .500 12.70 3 8-32NS-2B .125 3.18 .531 13.49 3 8-32NS-2B .250 6.35 .531 13.49 *Other colors available. Please consult factory. C Flat inch mm .500 12.70 .625 15.88 .625 15.88 15 E-SEEL Figure 23 Lock Nut O.D. inch mm .344 8.74 .469 11.91 .469 11.91 Military Part Number APM Boot Part Number -- -- -- NLK9040 x 1 8 NLK9030 x 1 8 NLK9030 x 1 4 DIMENSIONS FOR REFERENCE ONLY. Current dimensional drawings can be viewed on our website and CAD drawings can also be downloaded. www.apmhexseal.com * * * * * * * * * * 800.498.9034 Color* Gray Gray Gray * * * RoHS Compliant E-SEEL FIGURE 23 HEXSEAL Figure 22 A B C Military APM Boot Shaft Size Height Flat Part Thread Size** Color* Part Number Number inch mm inch mm inch mm 1 4-32NF2B .125 3.18 .219 5.56 .375 9.53 M5423/09-09 N9040 x 1 8 RFI Gray 3 8-32NEF-2B .125 3.18 .219 5.56 .500 12.70 M5423/09-07 N9030 x 1 8 RFI Gray 3 8-32NEF-2B .250 6.35 .219 5.56 .500 12.70 M5423/09-08 N9030 x 1 4 RFI Gray 3 8-32NEF-2B .250 6.35 .359 9.12 .500 12.70 M5423/09-14 N9033 x 1 4 RFI Gray 15 32-32NS-2B .250 6.35 .219 5.56 .625 15.88 M5423/09-10 N9060 x 1 4 RFI Gray 5 8-24NEF-2B .375 9.53 .219 5.56 .750 19.05 M5423/09-11 N9065 x 3 8 RFI Gray 1 2-32NS-2B .250 6.35 .219 5.56 .625 15.88 M5423/09-12 N9063 x 1 4 RFI Gray 1 4-28NF-2B .125 3.18 .219 5.56 .375 9.53 -- N9042 x 1 8 RFI Gray 3 8-32NEF-2B .125 3.18 .531 13.49 .625 15.88 -- NLK9030 x 1 8 RFI Gray 3 8-32NEF-2B .250 6.35 .531 13.49 .625 15.88 -- NLK9030 x 1 4 RFI Gray *Other colors available. Please consult factory. Inactive for new designs. **Metric thread sizes available; consult factory. All Standard RFI/EMI boots feature knitted Monel wire shields. HEXSEAL FIGURE 22 Bushing Seals for Sealed Switch Panel Mounting Hole Protect Against & Prevent Seepage/Leakage Through Switch Panel Cutout These reusable self-sealing washers are designed for use with popular sealed switches and circuit breakers. While such sealed switches are designed to tolerate hostile environments (such as salt spray, wash-downs, lubricating fluids, weather, dust and other contaminants) that may compromise reliable switch operation, they typically do not seal the panel cutout in which they are mounted. Hence, these same contaminants may "leak past" the bushing through the panel cutout causing equipment/system failures. Designed to prevent such leakage, each is fabricated from a stainless steel washer with a bonded high-tear strength silicone rubber sealing ring. The soft resilient ring conforms to the panel surface to seal out harmful contaminants. * Seals the panel cutout in which the circuit breaker is mounted, protecting behind-panel components from dirt/moisture. No O-ring required. * Reusable in the event the switch or circuit breaker fails and replacement is needed. * Easy to install without the need for special tools, sealing compounds, sealing tapes, et al. * Does not compromise switch or circuit breaker performance. * Meets stringent Military, UL and Canadian National Standards regarding environmental requirements for electrical enclosures. * UL Recognized for Type 4X & Type 6 enclosure protection. * Meets IEC IP66/68 enclosure protection SPECIFICATIONS Material ........................Stainless steel with bonded silicone rubber conforms to A-A-59588 GR. 50 (both sides P/N 60064; one side only P/N 60225) Temperature Range....-94F to +400F (-70C to +204C) Mounting .....................Either Front or Behind Panel Shelf Life .....................In excess of 25 years Resistant to.................Salt spray, sunlight, ozone, weather, fungus, and most acids and lubricating oils Agency Recognition...UL-Recognized Component to UL Std. 50, Types 1, 2, 3(R)(S), 4(X), 6, 12 & 13. UL Recognition also includes compliance with Canadian National Standards. See enlargement below HOW TO ORDER Specify selected APM boot part number shown in chart below. Compatible APM Washer Washer Switch Color Part Diameter Thickness Number Bushing 60064 60225 15/32-32 0.677" 0.660" 0.120" 0.105" Conforms to* Meets MIL-DTL-5423/16-01, MS25196, Gray UL & ULC Recognized *APM's policy is to manufacture our HEXSEAL(R) sealing boots as defined by the requirements of MIL-Spec MIL-DTL-5423 which we regard as the standard for the switch, circuit breaker and potentiometer industry. These requirements were formulated based on our original patent. Note: Where the possibility of build up of ice, dirt or other contaminants can accumulate in the toggle breaker external actuating mechanism, we recommend using a full or half silicone sealing boot which will protect the actuator mechanism and keep it operating smoothly, and its perimeter seal will protect the mounting hole from potential seepage. 60064 Visit our website for dimensional drawings and to download CAD drawings. 60225 RoHS Compliant www.apmhexseal.com 16 800.498.9034 Rocker Switch Boots E-SEEL(R) (Rock-R-SeelTM) rocker switch boots are molded from RUBRGLASTM -- APM's proprietary high tear-strength, transparent silicone rubber. These durable and flexible boots seal out dust, dirt, and moisture ... without compromising switch operability, position status viewing or legend visibility. Each is designed to fully enclose the switch bezel, while our unique molded-in "panel sealing rib" forms a watertight and dust-tight seal against the front panel surface. 5 SPECIFICATIONS 6 Material: APM RUBRGLASTM (transparent silicone rubber), polymer type, ASTM D1418 Temperature Range: -80F to +400F (-62C to +204C) Operational Life: 50,000 actuations (minimum) Resistant to: Salt spray, sunlight, ozone, weather, fungus, and most acids and lubricating oils Agency Recognition: Rock-R-SeelsTM are UL-Recognized Components for US & Canada to UL Std. 50, types 1, 2, 3R, 5, 12, 12K, 13 Shelf Life: Excess of 25 years 7 1 2 HOW TO ORDER 3 4 Specify APM boot part number. PHOTOS 1-7 IP54 Rated Dimensions Photo Compatible with These Rocker Switch Manufacturers (Partial List) # E-SEEL Part # in. mm in. mm in. mm in. mm in. mm 1 C1111/7 .359 9.13 .609 15.48 .937 23.81 1.703 43.26 .900 22.87 Consult Factory 2 C1113/62 .297 7.54 .797 20.24 .687 17.46 1.093 27.78 .968 24.61 Eaton/Arrow Hart - 2600 Series 3 C1113/63 .297 7.54 .406 10.32 .687 17.46 1.093 27.78 .515 13.10 Eaton/Arrow Hart - 2600 Series 4 C1113/66 .228 5.79 .348 8.84 .531 13.46 .750 19.05 .531 13.49 Carlingswitch #621 5 C1113/70 .297 7.54 .437 11.11 .875 22.23 1.218 30.96 .640 16.27 Carlingswitch RSC Series 6 C1113/71 .413 10.49 .687 17.46 1.046 26.59 1.327 36.51 .703 17.86 C1113/80 .560 14.22 .750 19.05 1.375 34.92 1.750 44.45 .900 22.86 Carlingswitch M Series Sensata R11 Eaton/Heinemann LC-1 Potter W-33 Carling LTI6 7 C1113/75 .413 10.49 .687 17.46 1.046 26.59 1.437 36.51 1.390 35.32 Carlingswitch M Series Sensata R21 Eaton/Heinemann LC-2 Not Shown C1213/53 C1213/60 .312 .350 9.14 10.16 .700 1.000 19.81 21.08 .700 .820 19.81 21.08 1.120 1.120 29.21 29.21 .800 .800 23.11 23.11 Oslo Oslo A B C D E S Series S Series DIMENSIONS FOR REFERENCE ONLY. Current dimensional drawings can be viewed on our website and CAD drawings can also be downloaded. RoHS Compliant Example: Carling Technologies M Series Rocker Actuator Switch with C1113/71 E-SEEL www.apmhexseal.com 17 800.498.9034 Economy Switch Seals SNAPSEELS(R) SPECIFICATIONS SNAPSEELS(R) combine economy with performance for more moderate temperature conditions and lower-demand commercial-grade applications. Each consists of a molded neoprene boot which snaps over a specially designed shouldered mounting nut. These inexpensive boots are an ideal way to protect switches and potentiometers against dust, dirt, grease and moderate amounts of moisture. Material: Boot: Neoprene. Color: Black (other materials and colors available on special order.) Temperature Range: -65F to +300F (-53C to +148C) Shelf Life: 2 years. Mounting Nut: Aluminum (see table below) Installation: A. Mount the switch using SNAPSEEL shouldered mounting nut. B. Press SNAPSEEL over switch actuator and snap over nut. HOW TO ORDER Select boot to fit switch type and dimensions. Choose shouldered mounting nut to mate with selected boot. SEE TABLE BELOW FOR SHOULDERED MOUNTING NUT OPTION. For example: When ordering a pushbutton boot PN 1211/10, also order its companion shouldered mounting nut P/N 2120/122/1. Pushbutton Boots Part No. 1211/10 Pushbutton Height from panel: Up to 9/16" Pushbutton Diameter: Up to 1/4" Bushing Diameter: 15/32" maximum Part No. 1211/5 Pushbutton Height from panel: Up to 9/16" Pushbutton Diameter: Up to 1/4" Bushing Diameter: 3/8" maximum Part No. 1211/32 Pushbutton Height from panel: Up to 19/64" Pushbutton Diameter: Up to 1/8" Bushing Diameter: 1/4" maximum P/N 1211/10 P/N 1211/32 P/N 1211/5 Toggle Switch Boots Part No. 1111/4 Bat Handle Height from panel: 7/8" Bat Handle Diameter: Up to 1/4" Bushing Diameter: 15/32" maximum Part No. 1111/9 Subminiature Toggle Boot Bat Handle Heights from panel: Up to 9/16" Bat Handle Diameter: Up to 1/8" Bushing Diameter: 1/4" maximum P/N 1111/4 P/N 1111/9 Rotary Shaft Boots Part No. 1312/7 Shaft Diameter: 1/4" nominal Bushing Diameter: 3/8" maximum Part No. 1312/8 Shaft Diameter: 1/8" nominal Bushing Diameter: 1/4" maximum P/N 1312/7 SNAPSEELTM Shouldered Mounting Nut Selection Chart TO INSURE PROPER DESIGN FUNCTION, SNAPSEEL MUST BE USED WITH APM SHOULDER TYPE NUT (SEE CHART FOR SIZES). METRIC THREAD AVAILABLE ON REQUEST. MATERIAL: ALUMINUM RoHS P/N 1312/8 APM Part No. (Shouldered Nut) Bushing Thread Size* For use with SNAPSEEL P/N A 2120/122/1 15 32-32 1211/10, 1111/4 17 32" 3 32" 11 64" 5 8" 2120/122/2 3 8-27 1211/5, 1312/7 13 32" 3 32" 11 64" 1 2" 2120/122/3 3 8-32 1211/5, 1312/7 13 32" 3 32" 11 64" 1 2" 2120/122/5 2120/122/6 2120/122/7 2120/122/9 2120/122/10 1 4-40 1211/32 1111/9 1312/8 9 32" 3 64" 3 32" 5 16" M6 x .75 10-48 1 4-32 12-24 Dimensions B C *Other thread sizes available. Please consult factory. Compliant www.apmhexseal.com 18 800.498.9034 D Installation Instructions for Threaded HEXSEAL(R) & E-SEEL(R) Boots IMPORTANT -- CAUTION STEP 3: THREAD RULE DIMENSION A 3 to 4 threads (maximum) for all toggle pushbutton and rotary shaft seals (except N5000 series). 2 to 3 threads (maximum) for N5000 series. For proper installation of these boots, follow these five sequential steps. It is EXTREMELY IMPORTANT that the number of threads on the switch/potentiometer bushing EXPOSED ABOVE THE FRONT PANEL SURFACE be within the recommendation (see chart above). Failure to respect these maximums may result in boot damage (such as tearing). STEP 1. Remove front mounting nut from switch bushing. STEP 2. Put threaded bushing through panel. STEP 3. Adjust back-up nut to allow the specified number of threads to protrude past front of panel (see Dimension "A" above). STEP 4. If needed, install appropriate bushing adaptor. STEP 5. Install switch boot in place of front mounting nut. .. . RECOMMENDED INSTALLATION TOOLS: Six point hex socket wrench. Spintite. Adjustable wrench (without serrated jaws). For torque setting, consult factory. Threaded Bushing Adaptors Inside (Bushing) Thread Size (Class 2B) Outside (Boot) Thread Size (Class 2A) 3/8-32 15/32-32 15/32-32 11/16-32 1/2-32 11/16-32 15/32-32 13/16-32 1/2-24 13/16-32 5/8-24 13/16-32 5/8-24 7/8-32 3/4-32 7/8-32 3/4-20 7/8-32 *5/32 thick. Additional sizes, including metric, available. Consult factory. APM Part Number 2500/1/5* 2500/1/7 2500/1/10 2500/1/8 2500/1/9 2500/1/11 2500/1/12 2500/1/13* 2500/1/14* Material: Plated Brass *Unless otherwise noted. Learn more about our other standard and custom products ... Ask for these catalogs: Circuit Breaker Boots Catalog CB Custom Elastomeric Seals Catalog CM www.apmhexseal.com Incandescent Lamp Colorizing Filters Catalog SK 19 Self-Sealing Fasteners Catalog SF 800.498.9034 METRIC Sizes for Toggle, Pushbutton and Rotary Switches and Circuit Breakers Operator Chamber E-SEEL(R) Silicone Rubber Boot SPECIFICATIONS Material ........................Silicone rubber polymer type ASTM D 1418 or A-A-59588 Mounting Nut ..............Brass, black-oxide. *Brass, nickel-plated. Temperature Range....-80F to +400F (-62C to +204C) Enclosure Protection..NEMA/UL/ULC Types 1, 2, 3, 3S, 3R, 4, 4X, 6P, 12, 13; IEC IP66/IP68 Pressure Range ..........Exceeds 15 psi internal and 1500 psi external Operational Life ..........100,000 actuations (minimum) RoHS Shelf Life .....................Excess of 25 years Compliant Resistant to.................Salt spray, sunlight, ozone, weather, fungus, (R) and most acids and lubricating oils C US Agency Recognition...UL & ULC Recognized Component to UL Std. 50 UL Recognized Component Installation...................Please see installation instructions on page 19 Single Piece Design Molded-in Mounting Nut Panel Sealing Rib (eliminates need for O-ring) Panel Switch Housing Additional metric sizes available (consult factory) Full Toggle (with Constant I.D.) Switch Boots (covers all external portions of switch & seals switch mounting hole) TOGGLE SWITCH BOOTS Fig. A Thread Size Throat Size1 ("A") Max Toggle Height2 Max Boot Height ("B") mm in. mm in. mm in. Figure A Flat ("C") mm in. Color APM Cat. No. M6 X 0.75 2.9 0.116 10.8 0.43 14.3 0.562 9.0 0.352 Black 1131/25* M12 X 0.75 5.3 0.21 16.2 0.64 21.6 0.85 15.8 0.625 Black C1131/41 M12 X 0.75 5.5 0.219 22.8 0.90 27.7 1.1 15.8 0.625 Black 1131/26-M12-.75 M12 X 1 6.5 0.256 16.7 0.66 21.4 0.844 15.8 0.625 Black 1131/31-M12 M12 X 1 5.9 0.234 16.9 0.66 21.8 0.859 15.8 0.625 Black 1131/40 M12 X 1 5.5 0.219 22.8 0.90 27.7 1.1 15.8 0.625 Black 1131/26-M12-.10 1 2 IP66/IP68/NEMA 6P Enclosure Protection Throat size is the maximum diameter of the switch toggle/handle (Dimension "A"). Max toggle height is the maximum distance from the end of the switch mounting stem to the end of the switch toggle. Half Toggle Switch Boots (Seals switch mounting stem & hole; toggle actuator protrudes) Fig. B Thread Size Throat Size ("A") mm Toggle Diameter Accomodated Max Boot Height ("B") in. mm in. mm in. Figure B Flat ("C") Color mm in. APM Cat. No. M5 X 0.5 1.1 0.42 1.57-4.57 0.062-0.18 5.7 0.225/0.25 7.9 0.313 Black 1132/17-M5-5 M12 X 1 2.36 0.093 2.92-6.09 0.115-0.24 11.1 0.437 15.9 0.625 Black 1132/33-M12-1 IP66/IP68/NEMA 6P Enclosure Protection PUSHBUTTON SWITCHES & CIRCUIT BREAKERS/PROTECTORS Fig. C Pushbutton Boots (Seals switch mounting stem & hole; toggle actuator protrudes) Fig. D Dimension "B" Max Plunger Diameter ("C") mm in. mm in. mm in. mm in. M10 X 1 15.47 0.62 8.4 0.33 16.3 0.64 8.1 M11 X 1 15.47 0.62 6.8 2.67 18.3 0.72 8.1 M12 X 1 18.64 0.733 11.9 0.469 15.9 0.625 M12 X 1 13.89 0.547 7.14 0.281 15.88 M12 X .75 13.89 0.547 7.14 0.281 15.88 Thread Size1 C Aluminum insert A B IP66/IP68/NEMA 6P Enclosure Protection 1 Max Boot Height ("A") Max Plunger Height Figures C & D Color1 APM Cat. No. Fig. 0.32 Black C1221/21-M10 D 0.32 Clear C1221/27 D 10.72 0.422 Black NC3030H-M12-1 C 0.625 10.72 0.422 Black N3030 M12x1 C 0.625 10.72 0.422 Black N3030 M12x.75 C "Clear" allows viewing of breaker amp rating and trip state; please enquire for other available colors. ROTARY SHAFT SEALS Seal the shaft and mounting hole of standard rotary switches/potentiometers that use a threaded stem and nut mounting. Fig. E Thread Size Shaft Size1 ("A") mm in. Height ("B") mm Flat ("C") in. mm in. Figure E Color2 APM Cat. No. M7 X 0.75 5.0 0.2 5.5 0.2 12.7 0.500 Gray 1332/39-2* M9 X 0.75 6.35 0.250 5.56 0.219 12.7 0.500 Gray C1332/41* M10 X 1 6.0 0.236 5.9 0.236 12.7 0.500 Gray 1332/45* Switch/potentiometer shaft must have a smooth, round cross-section where it meets the sealing edge of the shaft seal device. 2 Please enquire for other available colors. 1 IP66/IP68/NEMA 6P Enclosure Protection www.apmhexseal.com 20 800.498.9034 TOGGLE SWITCH SEALING BOOTS WITH INTEGRAL IQTM MOUNTING NUT THE IQ CONCENTRO-NUTTM MOUNTS OVER THE SWITCH'S FRONT PANEL MOUNTING-NUT * Ideal protection against unforgiving environmental hazards -- prolongs switch reliability * Ideal for speedy retrofitting of booted and non-booted switches * Ideal for easy original equipment assembling * Ideal for meeting aesthetic requirements that call for smooth exterior surface around mounting nut * Ideal color solutions for matching boot color to exact panel color, or for defining specific control function on request. INSTALLS Standard color choices are gray and black. QUICKLY * Patent No. 7,964,812 ... made in the USA The APM HEXSEAL IQ Switch Sealing Boot is designed for applications where it is preferable to retain the original switch's front-panel mounting nut. This version is made possible by the incorporation of a newly designed bonded concentric mounting nut that features an internal cavity configuration allowing the integral CONCENTRO-NUT to sit on and wrap itself around the existing original switch front panel nut. This enables the two nuts to work in concert when tightened. The IQ Switch Sealing Boot mounting design permits an easy and speedy retrofit, or new OEM installation. The use of the IQ Sealing Boot prevents any switch disturbance; for example, the undesirable rotation of the switch body and possible stress on its connections. No special tools or O-Rings, washers or adhesives are required. The IQ Switch Sealing Boot design also features a patented flange sealing-rib that fully contacts the front-panel surface, creating a vacuum seal that protects the mounting hole from gas or liquid seepage contamination. In addition to standard black or gray, any color can be specified to match any panel or to define a control function. High tear-strength silicone rubber with action-compatible tactility Single-piece design IQ-1030 Stop-Washer Bonded CONCENTRONUT RoHS Perimeter sealing rib. No O-Ring required. Compliant SPECIFICATIONS Dimensions Sheath Material: Silicone rubber conforms to A-A-59588, Class 3B, Grade 60 (unless otherwise specified) Mounting Nut (CONCENTRO-NUT) Material: Aluminum Stop Nut Material: Brass Temperature Range: -94F to +400F (-70C to +204C) Pressure Range: Exceeds 15 psi internal and 1,500 psi external Operational Life: 50,000 actuations (minimum) Shelf Life: Excess of 25 years Enclosure Protection: IEC 60529 IP 66/68 Rating Resistant To: Salt spray, sunlight, ozone, weather, ice, sand, dirt, fungus, most acids, solvents and lubricating oils Agency Recognition: UL Qualification pending Installation: Mounts over existing toggle switch actuator. Tighten approximately three turns. HOW TO ORDER Specify APM Boot part number. Example: IQ-1030-(add color code letter here) G=Gray, B=Black Note: For special colors add PMS or other color specification. Consult factory. Electronics Division 44 Honeck Street * Englewood NJ 07631 * (201) 569-5700 * Sales Toll Free (800) 498-9034 * Fax (201) 569-4106 Web: www.apmhexseal.com * E-mail: info@apmhexseal.com HEXSEALS, E-SEELS, ROCK-R-SEELS, RUBRGLAS, SEELSKREWS and I.Q. SURROUND NUT are U.S. Registered trademarks of APM HEXSEAL CORPORATION. Printed in U.S.A. APM-2009/7.5M Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: APM HEXSEAL: C1221/21 1131/26-M12-.75 1131/31-M12 1131/40 1132/17-M5-5 1132/33-M12-1 1332/39-2 1332/45 C1131/41 C1221/27 C1332/41 NC3030H-M12-1 1131/31 M12-1