209M412-19B-DL
SERIES
ORDER NUMBER (TABLE 1)
MATERIAL
REFER TO CH00-0250-004
FINISH
REFER TO CH00-0250-004
MODIFICATION CODE
REFER TO CH00-0250-004
DRAWN
APPROVED
CHECKED
DATE
11/09/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 15/10/2015
SHT
1
DRAWING NO:
209M4XX
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
W.RUST
11/09/2015
K.SHEPPARD 11/09/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
HEAT SHRINK BOOT BACKSHELL
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AM END THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING REV:
J
MIL-DTL-39888 SERIES III & IV
REVISIONS
LTR
REVISED PER ECO-15-002406
DESCRIPTION DATE APPROVED
H
JREVISED PER ECO-15-013980 15/10/2015 H.SMITH
19/02/15 H.SMITH
WHEN 'L' MODIFICATION IS SPECIFIED,
COUPLING NUT SHALL HAVE 3 LOCK WIRE HOLES,
120° APART
6
CODE 40 - HEAT SHRINK BOOT BACKSHELL
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-209M412-19B).
4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION.
5. BACKSHELL MATES TO MIL-C-38999 SERIES III & IV, CLASS C, F, K AND W, D38999/20,
/24, /26, /40, /46, /47 CONNECTORS AND WHEN SO MATED PROVIDE
A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PAR. 3.5.7.
6. WHEN 'L' MODIFICATION IS SPECIFIED, COUPLING NUT SHALL HAVE 3 LOCK WIRE
HOLES, 120° APART.
7. THIS IS A FUNCTIONAL EQUIVALENT OF MIL-C-85049/69
8. WHEN GROUNDING SCREW MODIFICATION IS ORDERED 18,50 MAX BECOMES 27,20 MAX
AND 25,50 MAX BECOMES 34,20 MAX
A-A
A
A
XXXX
DRAWN
APPROVED
CHECKED
DATE
11/09/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 15/10/2015
SHT
2
DRAWING NO:
209M4XX
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
W.RUST
11/09/2015
K.SHEPPARD 11/09/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
HEAT SHRINK BOOT BACKSHELL
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AM END THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING REV:
J
MIL-DTL-39888 SERIES III & IV
REVISIONS
LTR
REVISED PER ECO-15-002406
DESCRIPTION DATE APPROVED
H
JREVISED PER ECO-15-013980 15/10/2015 H.SMITH
19/02/15 H.SMITH
BASE
PART
NUMBER
ORDER.NO.
5
SHELL SIZE
COM'L / MIL
A
THREAD
ØB
MAX
X
+0,20/-0,00
ØY
MAX
ØZ
MIN
209M408 08 9 / A M12 × 1.0 18,0 1,12 13,50 6,80
209M410 10 11 / B M15 × 1.0 21,0 1,12 15,40 10,30
209M412 12 13 / C M18 × 1.0 24,5 1,12 19,70 13,60
209M414 14 15 / D M22 × 1.0 29,0 1,12 21,30 16,30
209M416 16 17 / E M25 × 1.0 32,5 1,12 24,50 19,50
209M418 18 19 / F M28 × 1.0 35,5 1,12 26,50 21,90
209M420 20 21 / G M31 × 1.0 37,0 1,75 31,00 25,20
209M422 22 23 / H M34 × 1.0 40,0 1,75 34,40 28,30
209M424 24 25 / J M37 × 1.0 43,5 1,75 36,60 31,50
TABLE 1
4 DRAIN HOLES
WHEN 'D' MODIFICATION
IS SPECIFIED
A THRAED
ØB
18,50 MAX 8
ØZ
ØY
X
WHEN 'L' MODIFICATION IS SPECIFIED,
COUPLING NUT SHALL HAVE 3 LOCK WIRE HOLES,
120° APART
10,50
3,50
25,50 MAX 8
PART MARK
HERE
MEDIUM DIAMOND
KNURL
SILICONE O-RING