Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Features: * * * * 2,500 to 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photo Darlington Sensor Low-cost plastic Dual-In-Line (DIP) package Agency Approvals: * * UL Certification No: E58730 VDE pending Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photodarlington) in a surface mount package. A wide selection of configurations are available. With typical isolation voltage of 2,500 or 5,000 Volts RMS, these products meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 volts RMS. A variety of LED and photosensor configurations are available depending on the system requirements. The ratio Current Transfer Ratio (CTR) is identified between the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. CTR = Photosensor - Current 20mA = * 100 = 200 10mA LED - Current All SMD products are shipped in a shipping tube with "TR" identified on the end of the part number. Example: OPI400ATR is a 4-Pin SMD shipped in tape and reel (TR) Applications: * * * * * High voltage isolation, up to 5,000 Volts RMS PCBoard power system isolation Industrial equipment power isolation Medical equipment power isolation Office equipment RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 1 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Package Outline Dimensions and Schematics: Top-View Package Style B (SOP) Package Style C (SSOP) Pin # Part Number OPIA400A 1 2 3 4 A K E C OPIA401B A K E C OPIA402B A-K K-A E C OPIA403B A K E C OPIA404B A K E C OPIA405C A K E C OPIA406C A K E C OPIA407C A-K K-A E C OPIA408C A K E C OPIA409C A K E C OPIA410A A-K K-A E C OPIA411A A K E C OPIA412A A K E C OPIA413A A K E C OPIA414B A K E C Package Style A (SMD) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 2 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Analog Output Devices Ordering Information Part Number Isolation Voltage Max. (Vrms) CTR Min/Typ/Max Typ. Tr / Tf (s) RL = 100 ohms Package Configuration OPIA400A 5,000 50 / - / 600 4/3 4-Pin SMD A K--C E OPIA401B 3,750 1,000 / - / - 100 / 20 4-Pin SOP A K--C E (Dar) OPIA402B 3,750 20 / - 400 4/3 4-Pin SOP A K, K A--C E OPIA403B 3,750 600 / 1,600 / 7,500 60 / 53 4-Pin SOP A K--C E (Dar) OPIA404B 3,750 50 / - / 600 5/4 4-Pin SOP A K--C E OPIA405C 2,500 80 / - / 600 3/5 4-Pin SSOP A K--C E OPIA406C 2,500 200 / 2,000 / - 200 / 200 4-Pin SSOP A K--C E (Dar) OPIA407C 2,500 80 / - / 600 3/5 4-Pin SSOP A K, K A--C E OPIA408C 2,500 200 / 2,000 / - 200 / 200 4-Pin SSOP A K--C E (Dar) OPIA409C 2,500 400 / 2,000 - 40 / 10 4-Pin SSOP A K--C E (Dar) OPIA410A 5,000 60 / - / 600 5/4 4-Pin SMD A K, K A--C E OPIA411A 5,000 70 / - / - 80 / 72 4-Pin SMD A K--C E (Dar) OPIA412A 5,000 600 / - / 9,000 60 / 50 4-Pin SMD A K--C E (Dar) OPIA413A 5,000 50 / - / 600 2/3 4-Pin SMD A K--C E OPIA414B 3,750 100 / - / 600 4/3 4-Pin SOP A K--C E E = Emitter (Dar) = Photodarlington Configuration: Definition of Terms LED Identification--Sensor Identification Configuration Information Packaging LED Sensor A = Anode K = Cathode B = Base C = Collector Part Number Suffix: TU = Shipped in Tubes Example: OPIA400DTU OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 3 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature OPIA400, OPIA404, OPIA410, OPIA411, OPIA412, OPIA413, OPIA414 OPIA401, OPIA402, OPIA403 OPIA405, OPIA406, OPIA407, OPIA408, OPIA409 Operating Temperature All except the part numbers noted below OPIA404 OPIA414 Isolation voltage (1 minute) OPIA400, OPIA410, OPIA411, OPIA412, OPIA413 OPIA401, OPIA402, OPIA403, OPIA404, OPIA414 OPIA405, OPIA406, OPIA407, OPIA408, OPIA409 Total Package Power Dissipation OPIA400, OPIA410, OPIA411, OPIA412, OPIA413 OPIA401, OPIA402, OPIA403, OPIA404, OPIA414 OPIA405 OPIA406, OPIA407, OPIA408, OPIA409 -55 C to +125 C -40C to +125 C -55C to +150 C -30 C to +100 C -55 C to +115 C -30 C to +115 C Lead Soldering Temperature (1/16" (1.6 mm) from case for 5 seconds with soldering iron) 5,000 Vrms 3,750 Vrms 2,500 Vrms 200 mW 170 mW 160 mW 260 C Input Diode Continuous Forward Current All except the part number noted below OPIA414 Peak Forward current (1 s pulse width, 300 pps) All except the part number noted below OPIA414 Reverse Voltage OPIA400, OPIA401, OPIA403, OPIA404, OPIA405, OPIA406, OPIA409, OPIA411, OPIA412, OPIA413, OPI414 OPIA402, OPIA407, OPIA408, OPIA409, OPIA410, OPIA412 Power Dissipation OPIA400, OPIA401, OPIA402, OPIA403, OPIA404, OPIA410, OPIA412, OPIA413, OPIA411 OPIA405, OPIA406, OPIA407, OPIA408, OPIA409 OPIA414 50 mA 10 mA 1A 200 mA 6V 70 mW 60 mW 15 mW Output Phototransistor Collector-Emitter Voltage OPIA400, OPIA402, OPIA404, OPIA410 OPIA401, OPIA409, OPIA412 OPIA403, OPIA411 OPIA406, OPIA408 OPIA413 OPIA405, OPIA407, OPIA414 Emitter-Collector Voltage OPIA400, OPIA405, OPIA406, OPIA407, OPIA408, OPIA410, OPIA411 OPIA401, OPIA412 OPIA402, OPIA403, OPIA404 OPIA409 OPIA413, OPIA414 Collector Current OPIA400, OPIA402, OPIA404, OPIA405, OPIA407, OPIA410, OPIA413, OPIA414 OPIA401, OPIA403, OPIA412 OPIA406, OPIA408 OPIA409 OPIA411 Power Dissipation All except the part numbers noted below OPIA405, OPIA406, OPIA407, OPIA408, OPI409 OPIA412 60 V 300 V 35 V 40 V 350 V 80 V 6V 0.1 V 5V 0.3 V 7V 50 mA 150 mA 90 mA 60 mA 80 mA 150 mW 120 mW 200 mW OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 4 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Electrical Characteristics SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 1.0 1.2 1.6 1.1 1.2 1.2 1.4 1.75 1.4 1.4 1.3 V IF = 20 mA IF = 10 mA IF = 5 mA IF = 10 mA IF = 10 mA - - 3.5 3.0 - V IFM = 500 mA - - 10 - - - 5 10 - 30 30 60 250 - pf V = 0.0 V, f = 1K Hz V = 0.0 V, f = 1K Hz V = 0.0 V, f = 1M Hz Collector dark Current OPIA400, OPIA402, OPIA404, OPIA410 OPIA405, OPIA407 OPIA413 OPIA414 - 10 - 100 100 200 100 nA IF = 0 mA, VCE = 20 V IF = 0 mA, VCE = 80 V IF = 0 mA, VCE = 300 V IF = 0 mA, VCE = 50 V Collector-emitter Saturation Voltage OPIA400 OPIA405, OPIA407 OPIA402, OPIA404, OPIA410 OPIA413 OPIA414 - 0.1 0.1 0.1 0.1 0.2 0.3 0.3 0.4 0.2 V IF = 20 mA, IC = 1 mA IF = 10 mA, IC = 2 mA IF = 20 mA, IC = 1 mA IF = 8 mA, IC = 2.4 mA IF = 10 mA, IC = 1 mA fC Cutt-Off frequency All except those noted below OPIA400, OPIA410, OPIA413 - 80 - K Hz tR Rise Time OPIA400, OPIA402, OPIA414 OPIA405, OPIA407 OPIA404, OPIA410 OPIA413 - 4 3 5 2 18 18 20 - tF Fall Time OPIA400D, OPIA402, OPIA414 OPIA405, OPIA407 OPIA404, OPIA410 OPIA413 - 3 5 4 3 18 18 20 - Input Diode VF Forward Voltage All except those noted below OPIA404 OPIA405, OPIA406, OPIA407, OPIA408 OPIA401, OPIA409, OPIA414 OPIA413 VFM Peek Forward Voltage OPIA403, OPIA410, OPIA412 OPIA400, OPIA405, OPIA411, OPIA413 OPI401, OPIA404, OPIA414, OPIA406, OPIA407, OPIA408, OPIA409 IR Reverse Current All except those noted below OPIA404, OPIA407, OPIA408, OPIA410, OPIA414 OPIA405, OPIA406, OPIA409 OPIA413 Ct Terminal Capacitance All except those noted below OPIA402, OPIA404, OPIA411, OPIA414 OPIA408, OPIA409 VR = 4 V A VR = 5 V VR = 5 V Output Phototransistor ICEO VCE(SAT) s s VCC = 5 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 VCC = 10 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 VCC = 10 V, IC = 2 mA, RL = 100 Continued on Next Page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 5 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Electrical Characteristics (OPIA400 Series) - Continued from Previous Page SYMBOL PARAMETER MIN TYP MAX Collector dark Current OPIA401, OPIA412 OPIA403, OPIA411 OPIA406, OPIA408 OPIA409 - - 1.0 1.0 0.4 0.4 Collector-emitter Saturation Voltage OPIA403 OPIA406, OPIA408, OPIA409 OPIA411 OPIA412 OPIA401 - 0.8 - 1.0 - UNITS TEST CONDITIONS Output PhotoDarlington ICEO VCE(SAT) A IF = 0 mA, VCE = 200 V IF = 0 mA, VCE = 10 V IF = 0 mA, VCE = 40 V IF = 0 mA, VCE = 300 V 1.0 1.0 1.0 1.5 1.5 V IF = 20 mA, IC = 1 mA IF = 1 mA, IC = 2 mA IF = 20 mA, IC = 5 mA IF = 20 mA, IC = 5 mA IF = 20 mA, IC = 100 mA 6.0 7.0 - K Hz VCC = 2 V, IC = 20 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 s VCC = 2 V, IC = 20 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 10 mA, RL = 100 VCC = 2 V, IC = 20 mA, RL = 100 VCC = 2 V, IC = 20 mA, RL = 100 s VCC = 2 V, IC = 20 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 10 mA, RL = 100 VCC = 2 V, IC = 20 mA, RL = 100 VCC = 2 V, IC = 20 mA, RL = 100 % IF = 5.00 mA, VCE = 5.0 V IF = 1.00 mA, VCE = 2.0 V IF = 1.00 mA, VCE = 5.0 V IF = 1.00 mA, VCE = 2.0 V IF = 5.00 mA, VCE = 5.0 V IF = 1.00 mA, VCE = 2.0 V IF = 5.00 mA, VCE = 5.0 V IF = 1.00 mA, VCE = 2.0 V IF = 1.00 mA, VCE = 2.0 V IF = 0.05 mA, VCE = 3.3 V IF = 1.00 mA, VCE = 2.0 V IF = 1.00 mA, VCE = 5.0 V V = 0.0 V, f = 1M Hz fC Cut-Off frequency OPIA401, OPIA406, OPIA408, OPIA409 OPIA411 OPIA403, OPIA412 tR Rise Time OPIA401 OPIA403 OPIA406, OPIA408 OPIA409 OPIA411 OPIA412 - 100 60 200 40 80 60 300 300 300 300 tF Fall Time OPIA401 OPIA403 OPIA406, OPIA408 OPIA409 OPIA411 OPIA412 - 20 53 200 10 72 50 100 250 250 250 Coupled Characteristics CTR Current Transfer Ratio OPIA400, OPIA404, OPIA413 OPIA401 OPIA402 OPIA403 OPIA405 OPIA406, OPIA408 OPIA407 OPIA409 OPIA410 OPIA411 OPIA412 OPIA414 Cf Floating Capacitance OPIA405, OPIA406, OPIA407, OPIA408, OPIA409 RISO Isolation resistance 50 1,000 20 600 80 20 0.3 400 60 70 600 100 600 400 7,500 600 2,000 1.0 3.0 2,000 600 9,000 600 - 0.6 0.4 1.0 - pF 5X1010 1011 - ohm C500V, 40% to 60%RH OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 6 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA400 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 7 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA400 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 8 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA401 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 9 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA401 Forward Current--IF(mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 10 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA402 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 11 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA402 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 12 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA403 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 13 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA403 Forward Current--IF(mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 14 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA404 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 15 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA404 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 16 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA405 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 17 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA405 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 18 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA406 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 19 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA406 Forward Current--IF(mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 20 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA407 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 21 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA407 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 22 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA408 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 23 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA408 Forward Current--IF(mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 24 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA409 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 25 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA409 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 26 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA410 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 27 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA410 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 28 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA411 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 29 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA411 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 30 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA412 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 31 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA412 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 32 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 33 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 34 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA414 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 35 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 OPIA414 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 36 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Quality / Reliability Requirements Failure Criteria Conditions 10% 11 samples after 500Hrs 0 Fail @ VCE = 5.0VDC, Ta = 70C 10% 50 samples after 96Hrs 0 Fail @ Max PD, Ta = 25C MTTF @ 90% confidence 150,000 Min. @ 25C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020B Lead Solderability 0 Fail per Method 208 of MIL-STD-202. 125C Min. DSC test method Temperature Humidity-Bias 20% 85C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle 20% per Method 1010.7 of MIL-STD-883E High Temperature Storage 20% 85C, 500Hrs Autoclave 0 Fail TA = 121C, Pressure = 15psi, Humidity = 100%, Time = 96Hrs Parameter HTRB D IC(OFF) HTFB D IC(ON) Glass Transition of body Note: This is to be performed when a change occurs to form, fit or function. Government and Industry Standard Compliance Requirements European Union's Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC Label Identification Carrollton, TX, USA DESCRIPTION: Size: 3" (7.4 cm) X 2.2" (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4-digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. - or use equivalent label format. MADE IN TAIWAN OPTEK P/N __OPIA407C-TR__ IIIIIIIIIIIIIIIIIIIII QTY. ________N/A_________ IIIIIIIIIIIIIIIIIIIII DATE CODE _____(YYWW)___ IIIIIIIIIIIIIIIIIIIII LOT I.D. ____(Y-NNNNDDD)__ IIIIIIIIIIIIIIIIIIIII OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 37 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Tube Packaging Information: Tube Optek's Optocoupler Part Numbers Packaging Quantities 4-PIN OPIA400D/A, OPIA410D/A OPIA413D/A P/H and 6-PIN SMD OPIA6XXD/A Series 8-PIN OPIA8XXD Series and OPID804D Qty Inner Small Carton Medium Carton Large Carton 52 x 7 x 7.5 cm 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5 cm 53.5 x 30.7 x 25 cm Weight Qty Weight Qty Weight Gross Weight Qty Weight Gross Weight Qty Gross Weight Weig ht 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0 170 -- 10,200 -- M/F 4-PIN and 5-PIN OPIA401B - OPIA404B, OPIA414B, SOP OPIA500B 4-PIN SSOP OPIA405C - OPIA409C P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package) SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD) M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil LeadSpacing) SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 38 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Tube Packaging Specifications--SMD-- (TU): DIMENSIONS ARE IN: INCHES [MILLIMETERS] Quantity: 4-pin (SMD): 100pcs/tube TOLERANCE: 0.008 INCHES [ 0.2 MILLIMETERS] Tube Packaging Specifications-- SOP (Mini-flats) and SSOP-- (TU): Quantity: 4-pin (SOP): 100pcs/tube 4-pin (SSOP): 170pcs/tube OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 39 of 41 Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Tape and Reel Packaging Specifications-- SMD and SOP--(TR): Tape Feeder: Direction: Quantity: 4-pin (SMD): 1000pcs/Reel 4-pin (SOP): 1000pcs/Reel 4-pin (SSOP): 3000pcs/Reel DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: 0.008 INCHES [ 0.2 MILLIMETERS] Reel: OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .4 11/08 Page 40 of 41 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--SMD, SOP and SSOP Packages OPIA400 through OPIA414 Tape and Reel Packaging Specifications-- SSOP--(TR): .0780.008 [2.00.02] .1570.008 [4.00.02 ] O.0590.004 [O1.500.05] 0.4720.008 [12.0 0.02] O.0590.004 [O1.500.05] 0.2850.008 [7.25 0.02] 0.0680.008 [1.75 0.02] 0.0880.008 [2.25 0.02] .1570.008] [4.00.02] .1000.008 [2.550.02] Direction: DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: 0.008 INCHES [ 0.2 MILLIMETERS] Reel: O.5310.02 [O13.50.5] 2.360.04 [601.0] O7.000.04 [O1781.0] O.0980.02 [2.50.5] .5110.04 [130.5] O.8260.04 [O211.0] .6290.04 [16.00.5] Quantity: 4-pin (SSOP): 2000pcs/Reel OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .4 11/08 Page 41 of 41