12A01M - Sanyo Semiconductor

12A01M

No.7478-1/4

Applications

•Low-frequency Amplifier, small motor drive,

muting circuit.

Features

•Ultrasmall package facilitates miniaturization in end

products.

•Low collector -to-emitter saturation voltage (resistance).

RCE (sat) typ.=0.57Ω [IC=0.5A, IB=25mA].

•Small ON-resistance (Ron).

Specifications

Absolute Maximum Ratings at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Collector-to-Base Voltage VCBO --15 V

Collector-to-Emitter Voltage VCEO --12 V

Emitter-to-Base Voltage VEBO --5 V

Collector Current IC--500 mA

Collector Current (Pulse) ICP --1.0 A

Collector Dissipation PCMounted on a glass-epoxy board (20✕30✕1.6mm) 300 mW

Junction Temperature Tj 150 °C

Storage Temperature Tstg --55 to +150 °C

Electrical Characteristics at Ta=25°C

Ratings

Parameter Symbol Conditions min typ max Unit

Collector Cutoff Current ICBO VCB=--12V, IE=0 --0.1 µA

Emitter Cutoff Current IEBO VEB=--4V, IC=0 --0.1 µA

DC Current Gain hFE VCE=--2V, IC=--10mA 300 700

Gain-Bandwidth Product fTVCE=--2V, IC=--50mA 490 MHz

Marking : XP Continued on next page.

PNP Epitaxial Planar Silicon Transistor

Ordering number : ENN7478

12A01M

O2203 TS IM TA-100565

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft's

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

Low-Frequency

General-Purpose Amplifier Applications

Package Dimensions

unit : mm

2059B

[12A01M]

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

1 : Base

2 : Emitter

3 : Collector

SANYO : MCP

0.3

0.65 0.65

2.0

0.425 1.250

2.1 0.425

0.15

0 to 0.1

0.2

0.3 0.6

0.9

12A01M

No.7478-2/4

Continued from preceding page. Ratings

Parameter Symbol Conditions min typ max Unit

Output Capacitance Cob VCB=--10V, f=1MHz 4 pF

Collector-to-Emitter Saturation Voltage VCE(sat) IC=--200mA, IB=--10mA --150 --300 mV

Base-to-Emitter Saturation Voltage VBE(sat) IC=--200mA, IB=--10mA --0.9 --1.2 V

Collector-to-Base Breakdown Voltage V(BR)CBO IC=--10µA, IE=0 --15 V

Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=--1mA, RBE=∞--12 V

Emitter-to-Base Breakdown Voltage V(BR)EBO IE=--10µA, IC=0--5 V

T urn-ON T ime ton See specified Test Circuit. 30 ns

Storage Time tstg See specified Test Circuit. 57 ns

Fall Time tfSee specified Test Circuit. 30 ns

Switching Time Test Circuit

VRRB

VCC= --5VVBE=5V

50Ω

INPUT

OUTPUT

220µF 470µF

PW=20µsIB1

D.C.≤1% IB2

IC=20IB1= --20IB2= --400mA

--200

--0.5

--20

--40

--60

--80

--100

--120

--140

--160

--180

--200

--600

--300

--400

--500

--100

--1.0 --2.0--1.5

IC -- VCE

IT05201

0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2

IC -- VBE

IT05202

--1.0 23 57 23 57 23 57

--10 --100

100

1000

--100

--10

--1000

hFE -- IC

IT05203

VCE(sat) -- IC

IT05204

--1.0 23 57 23 57 23 57

--10 --100 --1000

--1.0mA

--0.7mA

--0.5mA

--0.6mA

--0.4mA

--0.3mA

--0.2mA

--0.1mA

IB=0

--0.9mA

--0.8mA

VCE= --2V

--25°C

Ta=75°C

25°C

VCE= --2V

25°C

--25°C

Ta=75°C

IC / IB=20

Ta=75°C

25°C

--25°C

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- mA

Base-to-Emitter Voltage, VBE -- V

Collector Current, IC -- mA

DC Current Gain, hFE

Collector Current, IC -- mA

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

12A01M

No.7478-3/4

--1.0 53

100

1000

--1000--100

27 5327 5327

--10

fT -- IC

IT05208

2735 --10 23

--1.0

2735

--0.1

1.0

Cob -- VCB

IT05207

IT05206

--1.0 357

--10

235723572

--100 --1000

--10

--1.0

--0.1

VBE(sat) -- IC

IT05205

--1.0

--100

--10

23 57 23 57 23 57

--100 --1000

--10

--1000

VCE(sat) -- IC

100 20 40 60 80 100 120

300

250

200

150

350

140 160

PC -- Ta

IT05209

IC / IB=50

Ta=75°C

25°C

--25°C

Ta= --25°C

25°C

75°C

IC / IB=20

VCE= --2V

f=1MHz

Ambient Temperature, Ta -- °C

Collector Dissipation, PC -- mW

Mounted on a glass-epoxy board(20✕30✕1.6mm)

Collector Current, IC -- mA

Gain-Bandwidth Product, fT -- MHz

Collector-to-Base Voltage, VCB -- V

Output Capacitance, Cob -- pF

Collector Current, IC -- mA

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector Current, IC -- mA

Base-to-Emitter

Saturation Voltage, VBE(sat) -- V

Base Current, IB -- mA

Ron -- IB

ON-resistance, Ron -- Ω

f=1MHz

--0.1 IT06068

0.1

1.0

32 57 32 57

--1.0 --10

OUT

IN 1kΩ

1kΩ

12A01M

No.7478-4/4

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be expor ted without obtaining the expor t license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of October, 2003. Specifications and information herein are subject

to change without notice.