Product family data sheet
WWW. CREE.COM/XLAMP
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.407.5300
CLD-DS44 REV 5A
Cree® XLamp® XM-L HVW LEDs
PRODUCT DESCRIPTION
The Cree XLamp XM-L High Voltage
White LED provides the lighting-
class performance and reliability of
Cree XLamp LEDs in the standard XM
package. The XM-L HVW LED is an
order of magnitude smaller than other
high-voltage LED arrays, allowing
easy implementation of space-
constrained lighting applications with
smaller, more efcient high-voltage
drivers. Among these applications
are lamps such as A19, B10, GU10,
MR16, PAR30 and E17.
FEATURES
• Binned at 85 °C
• Typical forward voltage of 46 V @
44 mA, with Vf binning available
• Cree-standard XM mechanical
footprint, with electrically neutral
thermal path
• Low thermal resistance: 3.5 °C/W
• Wide viewing angle: 110°
• Maximum drive current: 125 mA
• Maximum junction temperature:
150 °C
• Unlimited oor life at ≤ 30 ºC/85%
RH
• Reow solderable
• Available in standard CRI and 80
minimum CRI congurations
• UL-recognized component
(E349212)
TABLE OF CONTENTS
Flux Characteristics .................... 2
Characteristics .......................... 2
Relative Spectral Power
Distribution............................... 3
Relative Flux vs. Junction
Temperature ............................. 3
Electrical Characteristics ............. 4
Thermal Design ......................... 4
Relative Flux vs. Current ............ 5
Typical Spatial Distribution .......... 5
Reow Soldering Characteristics .. 6
Notes ....................................... 7
Mechanical Dimensions............... 8
Tape and Reel ........................... 9
Packaging ............................... 10
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 2
FLUX CHARACTERISTICS (TJ = 85 °C)
The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as
a complete description of the order-code nomenclature, please consult the XLamp XM-L Binning and Labeling document.
Color
CCT Range Base Order Codes
Min Luminous Flux @ 44 mA Order Code
Min. Max. Group Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
Cool White 5000 K 8300 K
T3 220 255 XMLHVW-Q0-0000-0000LT351
T4 240 278 XMLHVW-Q0-0000-0000LT451
T5 260 301 XMLHVW-Q0-0000-0000LT551
Neutral White 3700 K 5000 K
T2 200 231 XMLHVW-Q0-0000-0000LT2E5
T3 220 255 XMLHVW-Q0-0000-0000LT3E5
T4 240 278 XMLHVW-Q0-0000-0000LT4E5
Warm White 2600 K 3700 K
S6 182 211 XMLHVW-Q0-0000-0000LS6E7
T2 200 231 XMLHVW-Q0-0000-0000LT2E7
T3 220 255 XMLHVW-Q0-0000-0000LT3E7
Notes:
• Cree maintains a tolerance of ± 7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy)
measurements and ± 2 on CRI measurements.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 68.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 82.
* Flux values at 25 °C are calculated and for reference only.
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal Resistance, junction to solder point °C/W 3.5
Viewing Angle (FWHM) degrees 110
Temperature coefcient of voltage mV/°C -35
ESD Classication (HBM per Mil-Std-883D) Class 2
DC Forward Current mA 125
Reverse Current mA 0.1
Forward voltage (@ 44 mA, 85 °C) V 46 55
LED Junction Temperature °C 150
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 3
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 44 MA)
Relative Spectral Power
0
20
40
60
80
100
400 450 500 550 600 650 700 750
Relative Radiant Power (%)
Wavelength (nm)
5000K - 8300K CCT
2600K - 3700K CCT
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 4
ELECTRICAL CHARACTERISTICS (TJ = 85 °C)
THERMAL DESIGN
Electrical Characteristics (Tj = 85ºC)
0
20
40
60
80
100
120
140
40.00 42.00 44.00 46.00 48.00 50.00 52.00
Forward Current (mA)
Forward Voltage (V)
Thermal Design
0
20
40
60
80
100
120
140
020 40 60 80 100 120 140
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 5
RELATIVE FLUX VS. CURRENT (TJ = 85 °C)
TYPICAL SPATIAL DISTRIBUTION
Relative Intensity vs. Current (Tj = 85ºC)
0%
50%
100%
150%
200%
250%
025 50 75 100 125
Relative Luminous Flux (%)
Forward Current (mA)
Typical Spatial Radiation Pattern
0
20
40
60
80
100
120
-100 -80 -60 -40 -20 020 40 60 80 100
Relative Luminous Intensity (%)
Angle (º)
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 6
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed
below. As a general guideline, Cree recommends that users follow the recommended soldering prole provided by the
manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and congurations of reow-soldering equipment.
Prole feature Lead-based solder Lead-free solder
Average ramp-up rate (TsMAX to Tp) 3 °C/second max 3 °C/second max
Preheat: Temperature min (TsMIN) 100 °C 150 °C
Preheat: Temperature max (TsMAX) 150 °C 200 °C
Preheat: Time (tsMIN to tsMAX) 60-120 seconds 60-180 seconds
Time maintained above: temperature (TL) 183 °C 217 °C
Time maintained above: time (tL) 60-150 seconds 60-150 seconds
Peak/classication temperature (Tp) 215 °C 260 °C
Time within 5 °C of actual peak temperature (tp) 10-30 seconds 20-40 seconds
Ramp-down rate 6 °C/second max 6 °C/second max
Time 25 °C to peak temperature 6 minutes max 8 minutes max
Note: All temperatures refer to topside of the package, measured on the package body surface.
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 7
NOTES
Lumen Maintenance Projections
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED
lumen maintenance. For information on the specic LM-80 data sets available for this LED, refer to the public LM-80
results document at www.cree.com/xlamp_app_notes/LM80_results.
Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/XRE_
lumen_maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp
Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how
thermal design, ambient temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity
In testing, Cree has found XLamp XM-L LEDs to have unlimited oor life in conditions ≤30 ºC/85% relative humidity
(RH). Moisture testing included a 168-hour soak at 85 ºC/85% RH followed by 3 reow cycles, with visual and electrical
inspections at each stage.
Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree
also recommends returning any unused LEDS to the resealable moisture-barrier bag and closing the bag immediately
fter use.
UL Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a re and electrical
enclosure per ANSI/UL 8750.
Vision Advisory Claim
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. See LED Eye Safety at www.cree.com/
xlamp_app_notes/led_eye_safety.
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 8
MECHANICAL DIMENSIONS
All measurements are ±.13 mm unless otherwise indicated.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.000
5.000
3.02
0.73 .50
3.78
2.78
4.78
R2.260
.500
4.8
3.8
.500
4.8
2.782
.500
.400
.400
.400
.400
4.7
4.7
.600
3.9
1/116.000
B
2610-00018
OUTLINE DRAWING, 5050 XML HV
--
--
----
----
08/1/11D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B ADDED DOME RADIUS DC 10/23/12
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
SHADED AREA IS OPEN
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.000
5.000
3.02
0.73 .50
3.78
2.78
4.78
R2.260
.500
4.8
3.8
.500
4.8
2.782
.500
.400
.400
.400
.400
4.7
4.7
.600
3.9
1/116.000
B
2610-00018
OUTLINE DRAWING, 5050 XML HV
--
--
----
----
08/1/11D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B ADDED DOME RADIUS DC 10/23/12
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
SHADED AREA IS OPEN
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.000
5.000
3.02
0.73 .50
3.78
2.78
4.78
R2.260
.500
4.8
3.8
.500
4.8
2.782
.500
.400
.400
.400
.400
4.7
4.7
.600
3.9
1/116.000
B
2610-00018
OUTLINE DRAWING, 5050 XML HV
--
--
----
----
08/1/11D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B ADDED DOME RADIUS DC 10/23/12
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
SHADED AREA IS OPEN
ANODE
ANODE
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 9
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTANED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
SURFACE FINISH:
63
330
+.25
-.75
12.4
+1.0
-.5
MEASURED AT EDGE
16.4
+0.2
.0
MEASURED AT HUB
12.4
+.2
.0
MEASURED AT HUB
±.213.1
1.9±.4
±.421
60° 60°
1/10.500
A
2400-00009
REEL, 13" X 12MM, 3 PIECE SNAP
-
ANTI-STATIC HIPS
----
----
09/29/09D. CRONIN
2400-00009
INDEX QTY ITEM COMMENTS
1 1 2400-00009-CORE
2 2 2400-00009-REEL
REVISONS
REV DESCRIPTION BY DATE APP'D
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
Loaded Pockets
(1000 Lamps)
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
(40 empty pockets min.)
12
1.75
4
83.35
1/13.000
B
2402-00012
XM LOADING SPEC
--
--
----
----
06/08/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A Loaded pocket count was 750 DDS 11/8/10 BS
B MADE CATHODE AND ANODE NOTE LARGER DC 2/26/12
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
XLamp Xm-L HVW LED
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are
registered trademarks of Cree, Inc. 10
PACKAGING
Label with Cree Bin
Code, Qty, Lot # Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Dessicant
(inside bag)
Humidity Indicator
Card (inside bag)
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Patent Label
Label with Cree Bin
Code, Qty, Reel ID
Label with Cree Bin
Code, Qty, Reel ID
Label with Cree Order Code,
Qty, Reel ID, PO #
Label with Cree Order Code,
Qty, Reel ID, PO #
Label with Cree Bin
Code, Qty, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel