Revised November 2001 74ALVCH162373 Low Voltage 16-Bit Transparent Latch with Bushold and 26 Series Resistors in Outputs General Description Features The ALVCH162373 contains sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. The flip-flops appear to be transparent to the data when the Latch enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH, the outputs are in a high impedance state. The ALVCH162373 data inputs include active bushold circuitry, eliminating the need for external pull-up resistors to hold unused or floating data inputs at a valid logic level. The ALVCH162373 is also designed with 26 series resistors in the outputs. This design reduces line noise in applications such as memory address driver, clock drivers and bus transceivers/transmitters. The 74ALVCH162373 is designed for low voltage (1.65V to 3.6V) VCC applications with output compatibility up to 3.6V. 1.65V to 3.6V VCC supply operation 3.6V tolerant control inputs and outputs Bushold on data inputs eliminates the need for external pull-up/pull-down resistors 26 series resistors in outputs tPD (In to On) 3.8 ns max for 3.0V to 3.6V VCC 5.0 ns max for 2.3V to 2.7V VCC 9.0 ns max for 1.65V to 1.95V VCC Uses patented noise/EMI reduction circuitry Latchup conforms to JEDEC JED78 ESD performance: Human body model > 2000V Machine model > 200V The 74ALVCH162373 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. Ordering Code: Ordering Number Package Number 74ALVCH162373T MTD48 Package Description 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Logic Symbol (c) 2001 Fairchild Semiconductor Corporation Pin Descriptions DS500708 Pin Names Description OEn Output Enable Input (Active LOW) LEn Latch Enable Input I0-I15 Bushold Inputs O0-O15 Outputs www.fairchildsemi.com 74ALVCH162373 Low Voltage 16-Bit Transparent Latch with Bushold and 26 Series Resistors in Outputs November 2001 74ALVCH162373 Connection Diagram Truth Tables Inputs Outputs LE1 OE1 I0-I7 O0-O7 X H X Z H L L L H L H H L L X O0 Inputs Outputs LE2 OE2 I8-I15 O8-O15 X H X Z H L L L H L H H L L X O0 H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial (HIGH or LOW, control inputs may not float) Z = High Impedance O0 = Previous O0 before HIGH-to-LOW of Latch Enable Functional Description The 74ALVCH162373 contains sixteen edge D-type latches with 3-STATE outputs. The device is byte controlled with each byte functioning identically, but independent of the other. Control pins can be shorted together to obtain full 16-bit operation. The following description applies to each byte. When the Latch Enable (LEn) input is HIGH, data on the In enters the latches. In this condition the latches are transparent, i.e., a latch output will change state each time its I input changes. When LEn is LOW, the latches store information that was present on the I inputs a setup time preceding the HIGH-to-LOW transition on LEn. The 3STATE outputs are controlled by the Output Enable (OEn) input. When OEn is LOW the standard outputs are in the 2state mode. When OEn is HIGH, the standard outputs are in the high impedance mode but this does not interfere with entering new data into the latches. Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 Recommended Operating Conditions (Note 3) -0.5V to +4.6V Supply Voltage (VCC) -0.5V to 4.6V DC Input Voltage (VI) Output Voltage (VO) (Note 2) Power Supply -0.5V to VCC +0.5V Operating DC Input Diode Current (IIK) VI < 0V -50 mA 0V to VCC Output Voltage (VO) DC Output Diode Current (IOK) 0V to VCC Free Air Operating Temperature (TA) VO < 0V -50 mA -40C to +85C Minimum Input Edge Rate (t/V) VIN = 0.8V to 2.0V, VCC = 3.0V DC Output Source/Sink Current 50 mA (IOH/IOL) 100 mA Supply Pin (ICC or GND) 10 ns/V Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. DC VCC or GND Current per Storage Temperature Range (TSTG) 1.65V to 3.6V Input Voltage (VI) -65C to +150C Note 2: IO Absolute Maximum Rating must be observed, limited to 4.6V. Note 3: Floating or unused control inputs must be held HIGH or LOW. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IOH = -100 A VCC (V) Min 1.65 - 1.95 0.65 x VCC 2.3 - 2.7 1.7 2.7 - 3.6 2.0 0.35 x VCC 2.3 - 2.7 0.7 2.7 - 3.6 0.8 1.65 - 3.6 Units V 1.65 - 1.95 V VCC - 0.2 IOH = -2 mA 1.65 1.2 IOH = -4 mA 2.3 1.9 IOH = -6 mA 2.3 1.7 3.0 2.4 IOH = -8 mA 2.7 2 IOH = -12 mA 3.0 2 IOL = 100 A 1.65 - 3.6 0.2 IOL = 2 mA 1.65 0.45 IOL = 4 mA 2.3 0.4 IOL = 6 mA 2.3 0.55 3.0 0.55 V IOL = 8 mA 2.7 0.6 IOL = 12 mA 3 0.8 II Input Leakage Current 0 VI 3.6V 3.6 II(HOLD) Bushold Input Minimum VIN = 0.58V 1.65 25 -25 Drive Hold Current Max 5.0 VIN = 1.07V 1.65 VIN = 0.7V 2.3 45 VIN = 1.7V 2.3 -45 VIN = 0.8V 3.0 75 -75 V A A VIN = 2.0V 3.0 0 < VO 3.6V 3.6 500 IOZ 3-STATE Output Leakage 0 VO 3.6V 3.6 10 A ICC Quiescent Supply Current VI = V CC or GND, IO = 0 3.6 40 A ICC Increase in ICC per Input VIH = VCC - 0.6V 3 - 3.6 750 A 3 www.fairchildsemi.com 74ALVCH162373 Absolute Maximum Ratings(Note 1) 74ALVCH162373 AC Electrical Characteristics TA = -40C to +85C, RL = 500 Symbol tPHL, tPLH CL = 50 pF Parameter VCC = 3.3V 0.3V Propagation Delay Bus to Bus tPHL, tPLH Propagation Delay LE to Bus CL = 30 pF VCC = 2.7V VCC = 2.5V 0.2V VCC = 1.8V 0.15V Units Min Max Min Max Min Max Min Max 1.3 3.8 1.5 5.0 1.0 4.5 1.5 9.0 ns 1.3 4.1 1.5 5.4 1.0 4.9 1.5 9.8 ns tPZL, tPZH Output Enable Time 1.3 4.4 1.5 5.9 1.0 5.4 1.5 9.8 ns tPLZ, tPHZ Output Disable Time 1.3 4.5 1.5 4.9 1.0 4.4 1.5 7.9 ns tW Pulse Width 1.5 1.5 1.5 4.0 tS Setup Time 1.5 1.5 1.5 2.5 ns tH Hold Time 1.0 1.0 1.0 1.0 ns ns Capacitance Symbol Parameter Conditions TA = +25C Units VCC Typical CIN Input Capacitance VI = 0V or VCC 3.3 6 COUT Output Capacitance VI = 0V or VCC 3.3 7 CPD Power Dissipation Capacitance 3.3 20 2.5 20 www.fairchildsemi.com Outputs Enabled f = 10 MHz, CL = 50 pF 4 pF pF pF TABLE 1. Values for Figure 1 TEST SWITCH tPLH, tPHL Open tPZL, tPLZ VL tPZH, tPHZ GND FIGURE 1. AC Test Circuit TABLE 2. Variable Matrix (Input Characteristics: f = 1MHz; tr = tf = 2ns; Z0 = 50) Symbol VCC 3.3V 0.3V 2.7V 2.5V 0.2V 1.8V 0.15V Vmi 1.5V 1.5V VCC/2 VCC /2 Vmo 1.5V 1.5V VCC/2 VCC /2 VX VOL + 0.3V VOL + 0.3V VOL + 0.15V VOL + 0.15V VY VOH - 0.3V VOH - 0.3V VOH - 0.15V VOH - 0.15V VL 6V 6V VCC*2 VCC*2 FIGURE 2. Waveform for Inverting and Non-Inverting Functions FIGURE 3. 3-STATE Output HIGH Enable and Disable Times for Low Voltage Logic FIGURE 4. 3-STATE Output LOW Enable and Disable Times for Low Voltage Logic FIGURE 5. Propagation Delay, Pulse Width and tREC Waveforms FIGURE 6. Setup Time, Hold Time and Recovery Time for Low Voltage Logic 5 www.fairchildsemi.com 74ALVCH162373 AC Loading and Waveforms 74ALVCH162373 Low Voltage 16-Bit Transparent Latch with Bushold and 26 Series Resistors in Outputs Physical Dimensions inches (millimeters) unless otherwise noted 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD48 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 6