Kingbright (R) 3.2x1.6mm SMD CHIP LED LAMP AP3216MGC MEGA GREEN Features z3.2mmx1.6mm zLOW SMT LED, 1.1mm THICKNESS. POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS Package Dimensions COLORS AND LENS TYPES AVAILABLE. Description The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide Par t No . AP3216MGC Di c e MEGA GREEN (InGaAlP) L en s Ty p e WATER CLEAR Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. AP3216MGC-1 Iv (mc d ) @ 20 mA View in g An g l e Min . Ty p . 21/2 20 50 120 Kingbright (R) Electrical / Optical Characteristics at T)=25C Sy m b o l Par ameter Dev ic e peak Peak Wavelength Mega Green 1/2 Spectral Line Halfwidth C Ty p . Max . Un i t s Tes t Co n d itio n s 565 nm IF=20mA Mega Green 25 nm IF=20mA Capacitance Mega Green 20 pF VF=0V;f=1MHz VF Forward Voltage Mega Green 2.25 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at T)=25C Par ameter Meg a Gr een Un i t s Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 200 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. AP3216MGC-2 Kingbright (R) Mega Green AP3216MGC AP3216MGC SMT Reflow Soldering Instructions AP3216MGC-3 Kingbright (R) AP3216MGC Recommended Soldering Pattern (Units : mm) AP3216MGC Tape Specifications (Units : mm) AP3216MGC-4