DRAWN
APPROVED
CHECKED
DATE
18/02/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 05/10/2015
SHT
1
DRAWING NO:
208M7XX
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
K.WINCZURA
18/02/2015
K.SHEPPARD 24/02/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
BRAID TAIL BACKSHELL
TE CONN E C TIVITY - P O LA M C O LT D RE SE RV ES TH E RIGH T TO AM E ND TH IS D R AW IN G
AN D T HE INF OR M AT IO N S ET FO R TH HE REON AT ANY T IM E . USERS SH OU LD
IN D E P EN DE NTLY E VAL UA TE TH E SU ITA B IL ITY OF THE PRODU C T FOR TH EIR AP PLIC ATION.
DRAWING REV:
S
MIL-DTL-38999 SERIES III & IV
REVISIONS
LTR
REVISED PER ECO-15-013980
DESCRIPTION DATE APPROVED
R
SREVISED PER ECO-17-009011
05.10.15 H.SMITH
D.JONES
21.06.17
SERIES
ORDER NUMBER (TABLE 1)
MATERIAL
REFER TO CH00-0250-004
FINISH
REFER TO CH00-0250-004 2
ENTRY SIZE (TABLE 2)
208M716-19B08
CODE 40 - BRAID TAIL BACKSHELL
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-208M712-19B08).
4. WHEN ENTRY SIZE EXCEEDS "MAX ENTRY", A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED.
5. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY
RING AT MANUFACTURERS OPTION.
6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W,
D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO
MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF
MIL-C-85049, PARA. 3. 5. 7.
DRAWN
APPROVED
CHECKED
DATE
18/02/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 05/10/2015
SHT
2
DRAWING NO:
208M7XX
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
K.WINCZURA
18/02/2015
K.SHEPPARD 24/02/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
BRAID TAIL BACKSHELL
TE CONN E C TIVITY - P O LA M C O LT D RE SE RV ES TH E RIGH T TO AM E ND TH IS D R AW IN G
AN D T HE INF OR M AT IO N S ET FO R TH HE REON AT ANY T IM E . USERS SH OU LD
IN D E P EN DE NTLY E VAL UA TE TH E SU ITA B IL ITY OF THE PRODU C T FOR TH EIR AP PLIC ATION.
DRAWING REV:
S
MIL-DTL-38999 SERIES III & IV
REVISIONS
LTR
REVISED PER ECO-15-013980
DESCRIPTION DATE APPROVED
R
SREVISED PER ECO-17-009011
05.10.15 H.SMITH
D.JONES
21.06.17
XXXX
XXXX
IF MAX ENTRY IS EXCEEDED BACKSHELL
WILL BE SUPPLIED AS TYPE 2
4
ORDER
NUMBER
SHELL SIZE
COML / MIL A THREAD ØB
MAX
MAX
ENTRY 4
08 9 / A M12x1.0 18,0 04
10 11 / B M15x1.0 21,0 07
12 13 / C M18x1.0 24,5 09
14 15 / D M22x1.0 29,0 10
16 17 / E M25x1.0 32,5 12
18 19 / F M28x1.0 35,5 14
20 21 / G M31x1.0 37,0 16
22 23 / H M34x1.0 40,0 18
24 25 / J M37x1.0 43,5 20
ENTRY
SIZE
ØK
MAX
ØZ
REF
ØY
REF
03 NA 4,77 13,1
04 NA 6,35 13,1
05 21,0 7,92 13,1
06 21,0 9,52 17,9
07 21,0 11,12 17,9
08 24,5 12,70 17,9
09 24,5 14,27 17,9
10 29,0 15,87 24,2
11 32,5 17,47 24,2
12 32,5 19,05 24,2
13 35,5 20,62 24,2
14 35,5 22,23 30,6
15 37,0 23,82 30,6
16 37,0 25,40 30,6
17 40,0 26,98 33,2
18 40,0 28,60 33,2
20 43,5 31,80 42,0
21 48,5 33,34 42,0
22 48,5 35,00 42,0
24 52,1 38,10 42,0
28 58,5 44,45 49,0
ØK
ØZ
ØY
TABLE 1
TABLE 2
23,50
152,40 MIN
TINNED COPPER
SHIELD TINNED COPPER
SHIELD
23,50
152,40 MIN
A THREAD
ØB
PART MARK
HERE
PART MARK
HERE
16,80 `0,50
A THREAD
ØB
ØZ
ØY
SILICONE
O-RING
ALTERNATIVE PROFILE
WHEN ENTRY IS CLOSE TO MAX ENTRY
ØZ
ØY
ØZ
ØY
ALTERNATIVE PROFILE
