1
®
FN7114.1
EL1506
Medium Power Differential Line Driver
The EL1506 is a very low power dual operational amplifier
designed for central office and customer premise line driving
for DMT ADSL solutions. This device features a high drive
capability of 400mA while consuming only 3.5mA of supply
current per amplifier from ±12V supplies. This driver
achieves a typical distortion of less than -75dBc, at 1MHz
into a 50Ω load. The EL1506 is available in the 28-pin
HTSSOP and the 24-pin thermally-enhance d SO packages.
Both parts are specified for operation over the full -40°C to
+85°C temperature range.
The EL1506 has an ENABLE pin which can be used to
enable and disable the outputs.
In most applications, the EL1506 is an upgrade and pin-
compatible drop-in replacement for the AD8016.
Ordering Information
PART NUMBER PACKAGE TAPE &
REEL PKG. DWG. #
EL1506CM 24-Pin SO -MDP0027
EL1506CRE 28-Pin HTSSOP -MDP0048
EL1506CRE-T7 28-Pin HTSSOP 7” MDP0048
EL1506CRE-T13 28-Pin HTSSOP 13” MDP0048
EL1506CREZ
(See Note) 28-Pin HTSSOP
(Pb-free) -MDP0048
EL1506CREZ-T7
(See Note) 28-Pin HTSSOP
(Pb-free) 7” MDP0048
EL1506CREZ-T13
(See Note) 28-Pin HTSSOP
(Pb-free) 13” MDP0048
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• Drives 360mA at 16VP-P on ±12V supplies
•40V
P-P differential output drive into 100Ω
• -75dBc typical driver output distortion driving 50Ω at 1MHz
• Low quiescent current of 3.5mA per amplifier
• Power-down disable mode
• Pb-Free available (RoHS compliant)
Applications
• ADSL G.DMT and G.lite CO line driving
• G.SHDSL, HDSL2 line driver
• ADSL CPE line driving
• Video distribution amplifier
• Video twisted-pair line driver
• Functional and pin-compatible with AD8016
Data Sheet April 18, 2005
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2003, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
Get Full Datasheet
2
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No lice nse is gran t ed by i mpli catio n or other wise u nder an y p a tent or patent righ t s of Int ersi l or it s sub sidi ari es.
For information regarding Intersil Corporation and its products, see www.intersil.com
EL1506
