POWER INDUCTORS High-Reliability Power Inductors MS558PTA High temperature materials allow operation in ambient temperatures up to 155C. Tin-lead (Sn-Pb) termination for the best possible board adhesion Excellent current handling; very low DCR Core material Ferrite Terminations Tin-lead over tin over nickel over phos bronze. Weight 1.6 g Ambient temperature -55C to +105C with Irms current, +105C to +155C with derated current Storage temperature Component: -55C to +155C. Tape and reel packaging: -55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Enhanced crush-resistant packaging 200/7 reel; 700/13 reel Plastic tape: 24 mm wide,0.4 mm thick, 16 mm pocket spacing, 5.45 mm pocket depth SRF (MHz) Inductance2DCR max3 Part number120% (H) (mOhm) min typ 4 MS558PTA331MSZ MS558PTA801MSZ MS558PTA102MSZ MS558PTA122MSZ MS558PTA132MSZ MS558PTA152MSZ MS558PTA182MSZ MS558PTA202MSZ MS558PTA222MSZ MS558PTA252MSZ MS558PTA322MSZ MS558PTA402MSZ MS558PTA432MSZ MS558PTA572MSZ 0.33 0.80 1.0 1.2 1.3 1.5 1.8 2.0 2.2 2.5 3.2 4.0 4.3 5.7 4.0 4.0 4.0 6.0 4.0 6.0 6.0 9.0 4.0 7.5 6.0 9.0 7.5 9.0 119 70.0 66.5 63.7 56.7 52.5 49.0 45.5 40.6 38.5 37.1 32.9 30.8 24.5 170 100 95.0 91.0 81.0 75.0 70.0 65.0 58.0 55.0 53.0 47.0 44.0 35.0 Isat (A)5 10% drop 20% drop 30% drop 29.5 24.9 16.5 20.5 12.9 13.5 13.3 15.3 8.9 11.4 7.3 8.3 6.4 5.4 30.0 25.2 17.0 21.0 16.8 14.0 13.8 15.8 9.6 11.8 7.8 8.5 6.8 5.8 30.5 25.6 17.5 21.3 17.2 14.5 14.3 16.2 10.0 12.1 8.5 8.8 7.0 6.0 Irms (A)6 20C rise 40C rise 12.5 12.5 12.5 11.0 12.5 11.0 11.0 8.5 12.5 9.0 11.0 8.5 9.0 8.5 16.3 16.3 16.3 15.0 16.3 15.0 15.0 11.5 16.3 12.0 15.0 11.5 12.0 11.5 1. When ordering, please specify testing code: MS558PTA103MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A or equivalent. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753D network analyzer. 5. Typical DC current at which the inductance drops the specified amount from its value without current. 6. Typical current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Document MS535-1 Revised 06/15/10 (R) (c) Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. POWER INDUCTORS MS558PTA Series Typical L vs Frequency Typical L vs Current 7 7 5.7 H 5 4 3.2 H 3 2.0 H 2 5.7 H 6 Inductance (H) Inductance (H) 6 5 4 3.2 H 3 2.0 H 2 1.3 H 1.3 H 1 1 0.8 H 0.8 H 0 0.1 1 10 100 Frequency (MHz) 0 0.1 Irms Derating 1 Current (A) 10 1 0.433 0.008 11,0 0,2 120 2 110 3 Terminal 3 is for mounting stability only. 0.402 0.008 10,2 0,2 100 90 80 70 60 0.205 max 5,20 50 40 25C Percent of rated Irms 100 30 20 0.075 0.004 1,90 0,1 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (C) 0.075 0.004 1,90 0,1 Suggested Land Pattern 0.083 0.004 2,10 0,1 1 0.152 3,85 0.083 0.004 2,10 0,1 0.083 0.004 2,10 0,1 0.118 3,00 0.091 2,30 Dimensions are in 3 0.215 5,47 0.134 3,40 2 inches mm Document MS535-2 Revised 06/15/10 (R) (c) Coilcraft, Inc. 2012 0.118 0.125 3,00 3,18 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.