Product specification - Jul 15, 2008 V.3 Supersedes Date of Mar. 06, 2003 DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0805 RoHS compliant 5%, 1% Product specification Chip Resistor Surface Mount RC SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes RC0805 series chip resistors with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER APPLICATIONS All general purpose application FEATURES RoHS compliant - Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes - Resistor element and glass are exempted by RoHS RC0805 Saving of PCB space (5) (6) (1) TOLERANCE F = 1% J = 5% (for Jumper ordering, use code of J) (2) PACKAGING TYPE R = Paper taping reel (3) TEMPERATURE COEFFICIENT OF RESISTANCE - = Base on spec (4) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel (5) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. None forbidden-materials used in products/production Halogen Free Epoxy ( PREFERRED ) X R - XX XXXX L (1) (2) (3) (4) Reducing environmentally hazardous wastes High component and equipment reliability 2 8 0805 (RoHS Compliant) SERIES Detailed resistance rules show in table of "Resistance rule of global part number". (6) OPTIONAL CODE L = optional symbol (Note) Resistance rule of global part number Resistance code rule Example 0R 0R = Jumper XRXX (1 to 9.76 ) 1R = 1 1R5 = 1.5 9R76 = 9.76 XXRX (10 to 97.6 ) 10R = 10 97R6 = 97.6 XXXR (100 to 976 ) 100R = 100 XKXX (1 to 9.76 K) 1K = 1,000 9K76 = 9760 XMXX (1 to 9.76 M) 1M = 1,000,000 9M76= 9,760,000 ORDERING EXAMPLE The ordering code of a RC0805 chip resistor, value 56 X with 1% tolerance, supplied in 7-inch tape reel is: RC0805FR-0756R(L). NOTE 1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Jul 15, 2008 V.3 Product specification Chip Resistor Surface Mount RC SERIES 3 8 0805 (RoHS Compliant) PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER ( PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2322 / 2350 XXX XXXXX L (1) TYPE/ START 0805 IN (1) (2) (3) Last digit of 12NC Resistance decade (3) (4) TOL. RESISTANCE (%) RANGE PAPER / PE TAPE ON REEL (units) (2) 5,000 10,000/not preferred 20,000 Last digit 0.01 to 0.0976 X 0.1 to 0.976 X 0 8 7 RC11 2322 5% 1 to 10 M 730 61xxx 730 71xxx 730 81xxx 1 to 9.76 X RC12 2322 1% 1 to 10 M 734 6xxxx 734 7xxxx 734 8xxxx 10 to 97.6 X 9 HRC11 2350 5% 11 to 22 M 521 10xxx - - 100 to 976 X 1 Jumper 2322 - 0 730 91002 730 91003 730 92002 1 to 9.76 KX 2 10 to 97.6 KX (1) The resistors have a 12-digit ordering code starting with 2322 / 2350. 3 100 to 976 KX 4 (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. 1 to 9.76 MX 5 10 to 97.6 MX 6 (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of "Last digit of 12NC". (4) "L" is optional symbol (Note) . ORDERING EXAMPLE The ordering code of a RC12 resistor, value 56 X with 1% tolerance, supplied in tape of 5,000 units per reel is: 232273465609(L) or RC0805FR-0756R(L). Example: 0.02 X = 0200 or 200 0.3 X = 3007 or 307 1X = 1008 or 108 33 KX = 3303 or 333 10 MX = 1006 or 106 NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Jul 15, 2008 V.3 Product specification Chip Resistor Surface Mount RC SERIES 4 8 0805 (RoHS Compliant) MARKING RC0805 E-24 series: 3 digits 03 YNSC001 Fig. 1 Value=10 K First two digits for significant figure and 3rd digit for number of zeros Both E-24 and E-96 series: 4 digits 00 YNSC004 Fig. 2 Value=10 K First three digits for significant figure and 4th digit for number of zeros For further marking information, please see special data sheet "Chip resistors marking". CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Nibarrier) are added. See fig.3 OUTLINES For dimension see Table 1 marking layer overcoat Primary glass layer resistive layer (Jumper chip is a conductor) inner electrode H termination(Ni/matte tin) ceramic substrate I2 overcoat I1 W DIMENSIONS YNSC066 Table 1 TYPE L RC0805 L (mm) 2.00 0.10 W (mm) 1.25 0.10 H (mm) 0.50 0.10 I1 (mm) 0.35 0.20 I2 (mm) 0.35 0.20 Fig. 3 Chip resistor outlines www.yageo.com Jul 15, 2008 V.3 Product specification Chip Resistor Surface Mount RC SERIES ELECTRICAL CHARACTERISTICS 5 8 0805 (RoHS Compliant) FOOTPRINT AND SOLDERING PROFILES Table 2 RC0805 1/8 W CHARACTERISTICS Operating Temperature Range -55 C to +155 C Maximum Working Voltage 150 V Maximum Overload Voltage 300 V Dielectric Withstanding Voltage 300 V For recommended footprint and soldering profiles, please see the special data sheet "Chip resistors mounting". 5% (E24) 1 to 22 M Resistance Range 1% (E24/E96) 1 to 10 M Zero Ohm Jumper < 0.05 Temperature Coefficient 1 R 10 200 ppm/C 10 M < R 22 M 200 ppm/C 10 < R 10 M 100 ppm/C Rated Current 2A Maximum Current 5A Jumper Criteria PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PRODUCT TYPE PACKING STYLE RC0805 Paper Taping Reel (R) REEL DIMENSION QUANTITY PER REEL 7" (178 mm) 5,000 units 10" (254 mm) 10,000 units 13" (330 mm) 20,000 units NOTE 1. For paper tape and reel specification/dimensions, please see the special data sheet "Packing" document. FUNCTIONAL DESCRIPTION POWER RATING RC0805 rated power at 70C is 1/8 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=(P X R) or max. working voltage whichever is less handbook, halfpage P (%Prated ) MLB206_2 100 50 0 55 0 50 70 100 155 o Tamb ( C) Where V=Continuous rated DC or AC (rms) working voltage (V) Fig. 4 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (Tamb) P=Rated power (W) R=Resistance value (X) www.yageo.com Jul 15, 2008 V.3 Product specification Chip Resistor Surface Mount RC SERIES 6 8 0805 (RoHS Compliant) TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Operational Life/ Endurance MIL-STD-202G-method 108A 1,000 hours at 705 C applied RCWV 1.5 hours on, 0.5 hour off, still air required (2%+0.05 ) High Temperature Exposure/ Endurance at upper category temperature MIL-STD-202G-method 108A Moisture Resistance MIL-STD-202G-method 106F IEC 60115-1 4.24.2 IEC 60115-1 4.25.1 <100 m for Jumper JIS C 5202-7.10 IEC 60115-1 4.25.3 1,000 hours at maximum operating temperature depending on specification, unpowered JIS C 5202-7.11 No direct impingement of forced air to the parts (1%+0.05 ) <50 m for Jumper Tolerances: 1253 C Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered (2%+0.05 ) <100 m for Jumper Parts mounted on test-boards, without condensation on parts Measurement at 242 hours after test conclusion Thermal Shock MIL-STD-202G-method 107G -55/+125 C Note: Number of cycles required is 300. Devices unmounted Short time overload MIL-R-55342D-para 4.7.5 IEC60115-1 4.13 (0.5%+0.05 ) for 10 K to 10 M (1%+0.05 ) for others Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air <50 m for Jumper 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature (2%+0.05 ) <50 m for Jumper No visible damage Board Flex/ Bending IEC60115-1 4.33 (1%+0.05 ) Device mounted on PCB test board as described, only 1 board bending required <50 m for Jumper 3 mm bending No visible damage Bending time: 605 seconds Ohmic value checked during bending www.yageo.com Jul 15, 2008 V.3 Product specification Chip Resistor Surface Mount RC SERIES 7 8 0805 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDECJ-STD-002B test B Electrical Test not required Well tinned (95% covered) IEC 60068-2-58 Magnification 50X No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 C dry heat 2nd step: leadfree solder bath at 2453 C Dipping time: 30.5 seconds - Leaching - Resistance to Soldering Heat IPC/JEDECJ-STD-002B test D No visible damage IEC 60068-2-58 Leadfree solder, 260 C, 30 seconds immersion time MIL-STD-202G-method 210F Condition B, no pre-heat of samples (1%+0.05 ) IEC 60068-2-58 Leadfree solder, 270 C, 10 seconds immersion time <50 m for Jumper No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Jul 15, 2008 V.3 Product specification Chip Resistor Surface Mount RC SERIES 8 8 0805 (RoHS Compliant) REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 3 - - Change to dual brand datasheet that describe RC0805 with RoHS compliant Jul 15, 2008 - Description of "Halogen Free Epoxy" added - Define global part number Version 2 Sep 03, 2004 - - New datasheet for 0805 thick film 1% and 5% with lead-free terminations - Replace the 0805 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10, and HRC11_5_4 - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) - High ohmic products combined into standard products. " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Jul 15, 2008 V.3