Shop Learn Blog Forums Videos Adabox IO Sign In 0 Products RASPBERRY PI / CASES / MODEL A & B / PIMORONI OMNIVESA Pimoroni OmniVESA PRODUCT ID: 2425 DISCONTINUED DESCRIPTION TECHNICAL DETAILS DESCRIPTION The Pimoroni OmniVESA is the perfect mounting solution for your Raspberry Pi! Simply remove the protective backing from the OmniVESA and follow Pimoroni's instructions to mount your Raspberry Pi either bare or in any Pimoroni case! (Some other cases supported too). The nylon screws provided are long enough to work with all of the relevant cases, though if you find they are protruding too far from the case of your choice you can easily trim them down using some pliers. Just remember to use eye protection when cutting! The OmniVESA supports 75mm and 100mm spacing mounts. Kit contains: 1x OmniVESA 2x M4 16mm Nylon Knurled Thumbscrews 2x 5mm Nylon Spacers 2x M2.5 x 16 Nylon Screws 3x M2.5 Nuts The OmniVESA is compatible with all Raspberry Pi models and all Pimoroni Pibow cases! An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. TECHNICAL DETAILS Dimensions (just the backing): 55mm x 117mm x 3mm / 2.2" x 4.6" x 0.1" Weight (just the backing): 16g For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forums or contact Pimoroni directly. MAY WE ALSO SUGGEST... DISTRIBUTORS EXPAND TO SEE DISTRIBUTORS 4.6