DESCRIPTION
The Pimoroni OmniVESA is the perfect mounting solution for your Raspberry Pi!
Simply remove the protective backing from the OmniVESA and follow Pimoroni's instructions to
mount your Raspberry Pi either bare or in any Pimoroni case! (Some other cases supported
too).
The nylon screws provided are long enough to work with all of the relevant cases, though if you
find they are protruding too far from the case of your choice you can easily trim them down
using some pliers. Just remember to use eye protection when cutting!
The OmniVESA supports 75mm and 100mm spacing mounts.
Kit contains:
1x OmniVESA
2x M4 16mm Nylon Knurled Thumbscrews
2x 5mm Nylon Spacers
2x M2.5 x 16 Nylon Screws
3x M2.5 Nuts
The OmniVESA is compatible with all Raspberry Pi models and all Pimoroni Pibow cases!
TECHNICAL DETAILS
Dimensions (just the backing): 55mm x 117mm x 3mm / 2.2" x 4.6" x 0.1"
Weight (just the backing): 16g
For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni
forums or contact Pimoroni directly.
MAY WE ALSO SUGGEST...
An error occurred.
Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser.
