PRELIMINARY 1101 Series A1101R04C The A1101R04C is a high-performance, FCC & IC certified and ETSI compliant connectorized radio module that incorporates the Texas Instruments CC1101 transceiver chip in the industry's smallest package (9 x 12 x 2.5mm). Features * * * * * * * * * * * * * * * * Frequency range: 433-434.4* MHz FCC, IC & ETSI compliant, shielded package Digital RSSI output Programmable output power up to +10dBm High sensitivity (-112 dBm at 1.2 kBaud, 433 MHz 1% packet error rate) Ultra-small package size 9 x 12 x 2.5mm Industry-standard U.FL connector LGA footprint RoHS compliant Operating temperature -40 to +85C Impedance-controlled, multi-layer PCB 1.8 to 3.6 VDC Low current consumption (15 mA in RX, 1.2 kBaud, 433 MHz) 200 nA sleep mode current consumption Efficient SPI interface; all registers can be programmed with one "burst" transfer Available in tape & reel and matrix tray * Device operating range 400-450 MHz, FCC & IC certified to 433-434.4 MHz Block diagram Benefits * * * * * * * * * * * * * No RF engineering experience necessary No additional "Intentional Radiator" certification required (FCC CFR 47 Part 15, IC RSS210, ETSI EN 300 220) Minimal real estate required Easily implemented on a two layer PCB No additional harmonic filtering required 100% RF-tested in production Common footprint for product family No additional DC decoupling required Integrated analog temperature sensor Excellent receiver selectivity and blocking performance Suitable for frequency hopping systems, thanks to a fast-settling frequency synthesizer with 90 s settling time Impedance-matched balun for optimized efficiency Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols PLEASE NOTE: Additional information on the Texas Instruments CC1101 device can be found in the company's latest datasheet release at http://www.ti.com This product shall not be used in any of the following products or systems without prior express written permission from Anaren Microwave, Inc: (i) implantable cardiac rhythm management systems, including without limitation pacemakers, defibrillators and cardiac resynchronization devices; (ii) external cardiac rhythm management systems that communicate directly with one or more implantable medical devices; or (iii) other devices used to monitor or treat cardiac function, including without limitation pressure sensors, biochemical sensors and neurostimulators. Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / air@anaren.com PRELIMINARY Footprint Product overview The A1101R04C is a high-performance, FCC & IC certified and ETSI compliant connectorized radio module that incorporates the Texas Instruments CC1101 transceiver chip in the industry's smallest package (9 x 12 x 2.5mm) and is compatible with all TI-approved software stacks. Top 2 pads optional for compatibility with other modules. Refer to User's Manual for additional layout guidelines. Dimensions in mm. With an LGA pad footprint and industry-standard U.FL button connector receptacle, this module is designed to effortlessly integrate into a wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. The A1101R04C has an RoHS-compliant ENIG finish and is packaged on tape and reel for highvolume automated manufacturing. Pin diagram Nomenclature DNC = Do Not Connect A 1 2 3 4 5 6 7 Chip series Function Frequency band Form factor Design ID Application Packaging (Anaren) (1101, 2500) (R = radio only) (x100MHz) (A = Internal Antenna, C = Connector) (00 = Default) (G = General) (R = Tape/Reel, M = Matrix Tray) Caution! ESD sensitive device. Precautions should be used when handling the device in order to prevent permanent damage. Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / air@anaren.com 1104a