LITE-ON SEMICONDUCTOR MBR2530CT thru 2560CT REVERSE VOLTAGE - 30 to 60 Volts FORWARD CURRENT - 25 Amperes SCHOTTKY BARRIER RECTIFIERS TO-220AB FEATURES Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency High current capability, low VF High surge capacity Plastic package has UL flammability classification 94V-0 For use in low voltage,high frequency inverters,free B L M C D A K E PIN 1 2 3 whelling,and polarity protection applications Case : TO-220AB molded plastic Polarity : As marked on the body Weight : 0.08 ounces, 2.24 grams Mounting position : any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) J N H H G H I J K L M PIN 1 PIN 2 CASE PIN 3 5.84 8.26 - F G I TO-220AB MAX. MIN. 14.22 15.88 10.67 9.65 2.54 3.43 E F MECHANICAL DATA DIM. A B C D 6.86 9.28 12.70 6.35 14.73 2.29 0.51 0.30 3.53 3.56 2.79 1.14 0.64 4.09 4.83 1.14 1.40 2.92 2.03 N All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TC=130 C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum forward Voltage (per leg) at (Note 1) IF = 15A, IF = 15A, IF = 30A, IF = 30A, Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ=25 C @TJ=125 C @TJ=25 C @TJ=125 C @TJ=25 C @TJ=125 C Voltage rate of change (Rated VR) Typical Junction Capacitance per element (Note 2) Typical Thermal Resistance (Note 3) Operating Temperature Range Storage Temperature Range VRRM VRMS VDC MBR 2530CT 30 21 30 MBR 2535CT 35 24.5 35 MBR 2540CT 40 28 40 MBR 2545CT 45 31.5 45 MBR 2550CT 50 35 50 MBR 2560CT 60 42 60 UNIT V V V I(AV) 25 A IFSM 150 A VF 0.82 0.73 0.75 0.65 - V IR 0.2 40.0 1.0 50.0 mA V/us dv/dt 10,000 CJ 450 pF R0JC 1.5 C/W TJ -55 to +150 C TSTG -55 to +175 C NOTES : 1. 300us Pulse Width, 2% Duty Cycle. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal Resistance Junction to Case. REV. 3,Oct-2011, KTHC15 FIG.1 - FORWARD CURRENT DERATING CURVE 40 30 AVERAGE FORWARD 20 CURRENT, (A) 10 RESISTIVE OR INDUCTIVE LOAD 0 50 25 75 100 125 150 175 PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTIC CURVES MBR2530CT thru MBR2560CT FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 150 125 100 75 50 25 8.3ms Single Half-Sine-Wave 0 1 2 5 CASE TEMPERATURE , () FIG.3 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT ,(A) 100 TJ = 125 C 10.0 1.0 TJ = 75 C 0.1 TJ = 25 C 0.01 MBR2530CT - MBR2540CT MBR2545CT &- MBR2560CT 20 40 60 80 100 10 TJ = 25 C 1.0 MBR2530CT - MBR2540CT MBR2545CT &- MBR2560CT 0.1 PULSE WIDTH 300us 2% Duty cycle 0.01 140 120 TJ = 125 C 0 0.1 PERCENT OF RATED PEAK REVERSE VOLTAGE ,(%) 0.2 0.3 0.4 FIG.5 - TYPICAL JUNCTION CAPACITANCE MBR2530CT - MBR2540CT MBR2545CT - MBR2560CT 1000 TJ = 25, f= 1MHz 100 0.1 1 0.5 0.6 0.7 0.8 INSTANTANEOUS FORWARD VOLTAGE , (V) 10000 CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(mA) 50 FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100.0 0.001 0 20 10 NUMBER OF CYCLES AT 60Hz 4 10 REVERSE VOLTAGE , (V) 100 0.9 Legal Disclaimer Notice MBR2530CT thru MBR2560CT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.