CMB4 MINI FEED-THROUGH Panel Mount For use when space constraints require extremely compact solutions and internal jumping is required. Individual components can be used to build your own assemblies. Just snap the required number of terminal block components together and place a Mounting Section on each end. The CMB 4 accepts internal jumpers and standard marking tags. * Extremely compact and cost effective * High density * Screw-cage clamp * Internal jumping provision * Polyamide 6.6 * Standard color: gray EP CMB4 Preassembled blocks are also available for quick and easy installations. Terminal Width 6 mm Height x Length 28 x 27 mm Stripping Length 9 mm Insulation Material Polyamide 6.6 Type of Connection 2screw clamps & 1 tapped hole for cross connection See Dimensions below. Approvals C US Wire Range 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 300 V 400 V 300 V Current Rating 35 A 32 A 35 A Torque 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Terminal Block CMB4 100 Mounting Section EPCMB4 50 Separator Plate SPCMB4 100 Mounting Screw* Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT2 100 Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw 2 pole 3 pole 4 pole 10 pole External Jumper Marking Tags (MT Type) b a Dimensions mm (in.) CMB4 No. of Cat No. Poles CMB4/2 2 CMB4/3 3 CMB4/4 4 CMB4/5 5 CMB4/6 6 CMB4/7 7 CMB4/8 8 CMB4/9 9 CMB4/10 10 CMB4/11 11 CMB4/12 12 CMB4/13 13 CMB4/14 14 CMB4/15 15 CMB4/16 16 CMB4/17 17 CMB4/18 18 CMB4/19 19 CMB4/20 20 CMB4/21 21 CMB4/22 22 CMB4/23 23 CMB4/24 24 Hole Width (a) Spacing (b) 26 (1.02) 19 (0.75) 32 (1.26) 25 (0.98) 38 (1.50) 31 (1.22) 44 (1.73) 37 (1.46) 50 (1.97) 43 (1.69) 56 (2.20) 49 (1.93) 62 (2.44) 55 (2.17) 68 (2.68) 61 (2.40) 74 (2.91) 67 (2.64) 80 (3.15) 73 (2.87) 86 (3.39) 79 (3.11) 92 (3.62) 85 (3.35) 98 (3.86) 91 (3.58) 104 (4.09) 97 (3.82) 110 (4.33) 103 (4.06) 116 (4.57) 109 (4.29) 122 (4.80) 115 (4.53) 128 (5.04) 121 (4.76) 134 (5.28) 127 (5.00) 140 (5.51) 133 (5.24) 146 (5.75) 139 (5.47) 152 (5.98) 145 (5.71) 158 (6.22) 151 (5.94) Mounting Section EPCMB4 * Any length M3 screw may be used. 48 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com