ACDC
Specification
3670 Watts
•Low Profile
•Single Outputs from 5 V to 48 V
•Universal Input
•Optional Floating Output
•High Power Density
•Class II Insulation on 36 W Version
•3 Year Warranty
AED Series
Input
Input Voltage • 90-264 VAC
Input Frequency • 47-63 Hz
Input Current • AED36: 1.00 A max
AED45: 1.20 A max
AED70: 2.00 A max
Inrush Current • AED36: 50 A max at 230 VAC
AED45: 100 A max at 230 VAC
AED70: 100 A max at 240 VAC
Earth Leakage Current • AED36: Class II
AED45/70: 3.5 mA max
Power Factor • Compliant with EN61000-3-2
Output
Output Voltage • See tables
Initial Set Accuracy • ±2%
Minimum Load • No minimum load requirement
Hold Up Time • AED36: 8 ms min at 115 VAC
AED45: 8 ms min at 115 VAC
AED70: 20 ms min at 115 VAC
Line Regulation • ±1%
Load Regulation • See tables
Ripple & Noise • 1% pk-pk max, 20 MHz BW (see note 2)
Overvoltage Protection • Typical 125% max
Overload Protection • 120-150% hiccup/trip & restart mode
with auto recovery
Short Circuit Protection • Continuous
Temperature • ±0.05%/˚C
Coefficient
xppower.com
General
Efficiency • 85% typical at 230 VAC & 100% load
Isolation • 3000 VAC Input to Output,
1500 VAC Input to Ground.
Negative output is connected to ground.
For optional 500 VAC output to ground
isolation add suffix ‘-F’ to model number
Switching Frequency • 60 kHz ±10 kHz
Power Density • AED36: 5.34 W/in3
AED45: 3.20 W/in3
AED70: 4.98 W/in3
MTBF • 200 kHrs to MIL-HDBK-217F at 25 °C, GB
Environmental
Operating Temperature • 0 ˚C to +60 ˚C derate linearly from 100%
load at +40 ˚C to 50% load at +60 ˚C
Operating Humidity • 93% RH, non-condensing
Operating Altitude • 2000 m
Storage Temperature • -20 ˚C to +85 ˚C
EMC & Safety
Emissions • EN55022 Class B conducted & radiated
Harmonic Currents • EN61000-3-2, Class A
Voltage Flicker • EN61000-3-3
ESD Immunity • EN61000-4-2, 8 kV air, 4 kV contact
Perf Criteria A
Radiated Immunity • EN61000-4-3, 3 V/m Perf Criteria A
EFT/Burst • EN61000-4-4, level 2 Perf Criteria A
Safety Approvals • EN60950-1, UL60950-1
4.33
(110)
0.79
(20)
1.97 (50)
IEC320-C8
0.47
(12.00)
ACDC
AED36
Models and Ratings
Output Power
Maximum
Output Voltage
Nominal
Output Current
Maximum
Load
Regulation(1)
Model
Number
20 W 5.0 V 4.00 A ±6% AED36US05
27 W 9.0 V 3.00 A ±5% AED36US09
30 W 12.0 V 2.50 A ±5% AED36US12
32 W 13.5 V 2.40 A ±5% AED36US13
36 W 15.0 V 2.40 A ±3% AED36US15
36 W 18.0 V 2.00 A ±2% AED36US18
36 W 24.0 V 1.50 A ±2% AED36US24
36 W 48.0 V 0.75 A ±2% AED36US48
Mechanical Details
Notes
1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load).
2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor.
Weight: 0.42 lbs (190 g) approx.
Power Cord Order Part:
UK - UK-MAINS-8
European - EU-MAINS-8
US - US-MAINS-8
Notes
All dimensions shown in inches (mm)
Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity.
Optional output connectors available.
Output cable is 48” (1220mm) approx.
3
ACDC
2.29
(58)
1.18
(30)
5.20
(132)
IEC320-C14
0.47
(12.00)
AED45
Models and Ratings
Output Power
Maximum
Output Voltage
Nominal
Output Current
Maximum
Load
Regulation(1)
Model
Number
30 W 5.0 V 6.00 A ±6% AED45US05
45 W 12.0 V 3.75 A ±5% AED45US12
45 W 15.0 V 3.00 A ±3% AED45US15
45 W 18.5 V 2.50 A ±2% AED45US18
45 W 19.0 V 2.37 A ±2% AED45US19
45 W 24.0 V 1.88 A ±2% AED45US24
48 W 48.0 V 1.00 A ±2% AED45US48
Mechanical Details
Notes
1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load).
2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor.
Notes
All dimensions shown in inches (mm)
Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity.
Optional output connectors available.
Output cable is 48” (1220mm) approx.
Weight: 0.73 lbs (330 g) approx.
Power Cord Order Part:
UK - UK-MAINS-IEC
European - EU-MAINS-IEC
US - US-MAINS-IEC
07-Feb-12
ACDC
AED70
Models and Ratings
Output Power
Maximum
Output Voltage
Nominal
Output Current
Maximum
Load
Regulation(1)
Model
Number
70 W 12.0 V 5.50 A ±5% AED70US12
70 W 15.0 V 4.60 A ±3% AED70US15
70 W 18.0 V 3.90 A ±2% AED70US18
70 W 19.0 V 3.70 A ±2% AED70US19
70 W 24.0 V 3.00 A ±2% AED70US24
70 W 48.0 V 1.50 A ±2% AED70US48
Mechanical Details
Notes
1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load).
2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor.
5.20 (132.0)
2.28
(58.0)
1.18
(30.0)
IEC320-C14
0.47
(12.0)
Notes
All dimensions shown in inches (mm).
Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center +
and outer shell - polarity.
2. Optional output connectors available.
3. Output cable is 48” (1220mm) approx.
Weight: 0.76 lbs (345 g) approx.
Power Cord Order Part:
UK - UK-MAINS-IEC
European - EU-MAINS-IEC
US - US-MAINS-IEC