SS12L - SS115L Taiwan Semiconductor CREAT BY ART 1A, 20 - 150V Surface Mount Schottky Barrier Rectifiers FEATURES - Low power loss, high efficiency - Ideal for automated placement - Guardring for overvoltage protection - High surge current capability - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: Sub SMA Sub SMA Molding compound, UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: Indicated by cathode band Weight: 0.019 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25C unless otherwise noted) PARAMETER SYMBOL Marking code SS SS SS SS SS SS 12L 13L 14L 15L 16L 19L SS SS 110L 115L UNIT 12L 13L 14L 15L 16L 19L 10L A5L Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 90 100 150 V Maximum RMS voltage VRMS 14 21 28 35 42 63 70 105 V Maximum DC blocking voltage VDC 20 30 40 50 60 90 100 150 V Maximum average forward rectified current IF(AV) 1 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum instantaneous forward voltage (Note 1) @ 0.5A @ 1.0A VF 0.385 0.45 0.43 0.50 0.51 0.55 TJ=25C Maximum reverse current @ rated VR TJ=100C 0.58 0.70 0.70 0.80 0.4 IR TJ=125C V 0.05 6.0 8.0 0.75 0.90 - mA 0.5 - Voltage rate of change (Rated VR) dV/dt 10000 V/s Typical thermal resistance RJL RJA 45 100 C/W Operating junction temperature range Storage temperature range TJ TSTG - 55 to +125 - 55 to +150 - 55 to +150 C C Note 1: Pulse test with PW=300s, 1% duty cycle Document Number: DS_D1409052 Version: P15 SS12L - SS115L Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. PACKING PACKING CODE SUFFIX CODE RU RV RT MT RQ MQ R3 RF R2 M2 SUFFIX SS1XL (Note 1) H PACKAGE PACKING Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA 1,800 / 7" Plastic reel (8mm tape) 3,000 / 7" Plastic reel (8mm tape) 7,500 / 13" Paper reel (8mm tape) 7,500 / 13" Plastic reel (8mm tape) 10,000 / 13" Paper reel (8mm tape) 10,000 / 13" Plastic reel (8mm tape) 1,800 / 7" Plastic reel (12mm tape) 3,000 / 7" Plastic reel (12mm tape) 7,500 / 13" Paper reel (12mm tape) 7,500 / 13" Plastic reel (12mm tape) RH Sub SMA 10,000 / 13" Paper reel (12mm tape) MH Sub SMA 10,000 / 13" Plastic reel (12mm tape) G Note 1: "x" defines voltage from 20V (SS12L) to 150V (SS115L) EXAMPLE PREFERRED PART NO. PART NO. PART NO. SS16LHRUG SUFFIX SS16L PACKING CODE PACKING CODE H DESCRIPTION SUFFIX RU AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25C unless otherwise noted) FIG.1 FORWARD CURRENT DERATING CURVE SS15L-SS115L 1 0.8 0.6 SS12L-SS14L 0.4 0.2 0 0 25 50 75 100 LEAD TEMPERATURE 150 10 1 SS19L-SS110L 0.1 0.6 0.8 1 1.2 FORWARD VOLTAGE (V) Document Number: DS_D1409052 20 10 0 1 10 100 10000 SS115L 0.4 30 FIG. 4 TYPICAL REVERSE CHARACTERISTICS SS12L 0.2 8.3ms Single Half Sine-Wave NUMBER OF CYCLES AT 60 Hz SS15L-SS16L SS13L-SS14L 40 (oC) FIG. 3 TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT (A) 125 INTANTANEOUS REVERSE CURRENT. (uA) AVERAGE FORWARD CURRENT (A) 1.2 PEAK FORWARD SURGE CURRENT (A) FIG. 2 MAXUMUM FORWARD SURGE CURRENT 1.4 1.6 1.8 TJ=100oC 1000 100 TJ=75oC 10 1 TJ=25oC 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) Version: P15 SS12L - SS115L Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE 100 100 10 TRANSIENT THERMAL IMPEDANCE (C/W) JUNCTION CAPACITANCE (pF) 1000 f=1.0MHz Vslg=50mVp-p 1 10 1 0.1 0.1 1 10 100 0.01 0.1 1 10 100 T-PULSE DURATION(s) REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS Sub SMA Unit (mm) DIM. Unit (inch) Min Max Min Max B 1.70 1.90 0.067 0.075 C 2.70 2.90 0.106 0.114 D 0.16 0.30 0.006 0.012 E 1.23 1.43 0.048 0.056 F 0.80 1.20 0.031 0.047 G 3.40 3.80 0.134 0.150 H 2.45 2.60 0.096 0.102 I 0.35 0.85 0.014 0.033 J 0.00 0.10 0.000 0.004 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 1.4 0.055 B 1.2 0.047 C 3.1 0.122 D 1.9 0.075 E 4.3 0.169 MARKING DIAGRAM P/N = Marking Code G = Green Compound YW = Date Code F = Factory Code Document Number: DS_D1409052 Version: P15 SS12L - SS115L Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1409052 Version: P15