Product Brief DUSLICTM-xT Lantiq`s Next Generation Voice CPE Solution Typical Applications * xPON Single Family Units and Home Gateway Units * Cable modems and set-top boxes * DSL Integrated Access Devices * VoIP terminals * Analog Terminal Adapters * PBX and Business Gateways Features * Worldwide programmability for AC transmission performance parameters according to ITU-T Q.552 and Telcordia GR-57-CORE * On-hook transmission * CID type 1, 2, 3 transmission support * DTMF generator & receiver * Integrated DC/DC PWM controller * Balanced (up to 85 Vrms) & unbalanced (up to 50 Vrms) ringing * DC, AC and fast ring trip detection * Loop start signaling * * * * * * * * * Ground start signaling Ground key indication Pulse metering (TTX) PCM interface G.711 A-law/-law or 16 bit linear Serial Control Interface SCI (Lantiq), big and little endian support, SPI compatible Linux(R) TAPI support Polling or interrupt driven access Wideband audio support (16 kHz, 16 bit linear) Integrated Test and Diagnostic Functions www.Lantiq.com The DUSLICTM-xT1 and DUSLICTM-xT2 line interface solution combine analog codec and high voltage SLICs in a single package with reduced footprint. This unmatched flexibility and performance enables CPE Voice applications with optimized design and cost. The DUSLICTM-xT is the most recent addition to Lantiqs mature and field-proven Voice CPE product line. PIN-to-PIN compatible 1 and 2 channel solutions enable customer to design a single hardware on basis of 2-layer design. Compared to other available devices, DUSLICTM-xT offers full CO grade transmission performance (concerning ringing, feeding, DTMF generation & detection, and Caller-ID) with an industrial temperature range. DUSLICTM-xT also supports industry standard (GR-909) line test requirements and additional unique tests such as electronic ring detection to validate lines that have no handset attached. A Best-in Class Bill of Material and the ability to implement designs on a 2-layer PCB allows CPE system manufacturers to offer voice telephony with CO grade performance and full wideband (16 kHz/16 bit) support at optimized system cost. Industry leading lowest power consumption, measured in both on and off-hook conditions, allows to meet stringent Code of Conduct requirements while using a smaller power supply to further improve system design and cost. Product Highlights * PIN-to-PIN compatible 1 and 2 channel solution * Meets worldwide POTS specification * CO-grade transmission performance - Industrial temperature range (-40C...+85C) - 150 V ringing voltage - Feeding up to 50 mA - Automatic ring current regulation - DTMF generation & detection - Caller ID generation * Wideband support (16 kHz, 16 bit linear) * * * * * * * * * Best-in-class RBOM Dedicated schematics and LOM for various applications 2-layer reference design Shared Protection Extremely low power consumption (due to high accuracy DC feeding and ring current regulation) Advanced integrated line testing (exceeding GR-909) High-level API software package (TAPI) Coefficient calculation tool (XTCOS) Complete design-in and system package Product Brief DUSLICTM-xT Lantiq`s Next Generation Voice CPE Solution Block Diagram PLL, Clock Control BUS Analog Channel A SLIC Analog Channel B Serial Interface GPIOs PCM BUS Phone Line SLIC Interrupt HOST Analog Line Module Host Interface DC/DC Converter Controller ROM/RAM Not available in 1 channel device Application Diagram D5C2> 7=2D9 H=2? 3cRUSR_U ?Vehc\ A@?5D=c4RS]V A@?5D= c4RS]VD4 FD3 DA:e4 A4> A@ED A@ED =R_eZb4YZad EYZcUaRcej4YZad Product Summary Sales Code Description Package PEF 3201 V V1.4 DUSLICTM-xT2 - 2 channel CODEC/SLIC PG-VQFN-88 PEF 3201 F V1.4 DUSLICTM-xT2 - 2 channel CODEC/SLIC PG-TQFP-100 PEF 3101 V V1.4 DUSLICTM-xT1 - 1 channel CODEC/SLIC PG-VQFN-88 Linux(R) is registered trademark of Linus Torvalds VxWorks(R) is the registered trademark of Wind River, Inc. How to reach us: http://www.Lantiq.com Published by Lantiq 85579 Neubiberg, Germany (c) 2013 Lantiq. All Rights Reserved. Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Lantiq hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Lantiq Office (www.Lantiq.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Lantiq Office. Lantiq components may be used in life-support devices or systems only with the express written approval of Lantiq, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Order Number: PB-e-0038-v2