1N2970 thru 1N3015B and 1N3993 thru 1N4000A 10 WATT ZENER DIODES SCOTTSDALE DIVISION APPEARANCE These high power 10 W Zener diodes represented by the JEDEC registered 1N2970 thru 1N3015B and 1N3993 thru 1N4000A series provide voltage regulation in a selection over a 3.9 V to 200 V broad range of voltages. They may be operated up to 10 W with adequate mounting and heat sinking with their low thermal resistance. These Zeners are also available in JAN, JANTX, JANTXV military qualifications. Microsemi also offers numerous other Zener products to meet higher and lower power applications. DO-4 (DO-203AA) IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * * * * APPLICATIONS / BENEFITS * JEDEC registered 1N2970 thru 1N3015B and 1N3993 thru 1N4000A Internal solder bond construction Hermetically sealed (welded) Zener Voltage 3.9V to 200V. Also available in JAN, JANTX, and JANTXV qualifications per MIL-PRF-19500/124 by adding the JAN, JANTX, or JANTXV prefixes to part numbers for desired level of screening; (e.g. JANTX1N2970B, JANTXV1N3996A, etc. Standard polarity is anode to case (stud) for 1N2970 thru 1N3015B and cathode to case for 1N3993 thru 1N4000A Reverse polarity is cathode to case for 1N2970 thru 1N3015B and anode to case for 1N3993 thru 1N4000A by designating R suffix, e.g. 1N2970RB, 1N3993RA, etc. Consult factory for surface mount equivalents * * * * * MAXIMUM RATINGS * MECHANICAL AND PACKAGING o * Junction Temperatures: -65 C to +175 C Storage Temperatures: -65oC to +200oC DC Power Dissipation: 10 Watts Power Derating: 80 mW/oC above 50oC Forward Voltage @ 2.0 A: 1.5 Volts THERMAL RESISTANCE: 10oC/W (typical) junction to case (stud) Solder temperatures: 260 oC for 10 s (max) * * * * * Copyright 2003 11-12-2003 REV A Regulates voltage over a broad operating current and temperature range Standard voltage tolerances are +/- 5% with B suffix, +/-10% with an A suffix, and +/-20% with no suffix Consult factory for +/-2% or +/-1% voltage tolerance with a C or D suffix respectively Reverse polarity available Nonsensitive to ESD per MIL-STD-750 Method 1020 Inherently radiation hard as described in Microsemi MicroNote 050 CASE: Industry Standard DO-4, (DO-203AA), 7/16" Hex, stud with 10-32 threads, welded, hermetically sealed metal and glass FINISH: All external surfaces are corrosion resistant and terminal solderable POLARITY: 1N3993 - 1N4000: Std. Polarity is cathode to stud. Reverse polarity (anode to stud) indicated by suffix "R" 1N2970 - 1N3015: Std. Polarity is anode to stud. Reverse polarity indicated by suffix "R" WEIGHT: 7.5 grams MOUNTING HARDWARE: Consult factory for optional insulator, bushing solder terminal, washers, and nut See package dimension on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N2970 - 1N3015B 1N3993 - 1N4000A * * * * * * o WWW . Microsemi .C OM DESCRIPTION 1N2970 thru 1N3015B and 1N3993 thru 1N4000A 10 WATT ZENER DIODES SCOTTSDALE DIVISION ZENER TEST CURRENT (IZT) 1N3993A 1N3994A 1N3995A 1N3996A 1N3997A 1N3998A 1N3999A 1N4000A 1N2970B 1N2971B 1N2972B 1N2973B 1N2974B 1N2975B 1N2976B 1N2977B 1N2978B 1N2979B 1N2980B 1N2981B 1N2982B 1N2983B 1N2984B 1N2985B 1N2986B 1N2987B 1N2988B 1N2989B 1N2990B 1N2991B 1N2992B 1N2993B 1N2994B 1N2995B 1N2996B 1N2997B 1N2998B 1N3099B 1N3000B 1N3001B 1N3002B 1N3003B 1N3004B 1N3005B 1N3006B 1N3007B 1N3008B 1N3009B 1N3010B 1N3011B 1N3012B 1N3013B 1N3014B 1N3015B Volts 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 6.8 7.5 8.2 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 30 33 36 39 43 45 47 50 51 52 56 62 68 75 82 91 100 105 110 120 130 140 150 160 175 180 200 mA 640 580 530 490 445 405 370 335 370 335 305 275 250 230 210 190 180 170 155 145 140 130 125 115 105 100 95 85 75 70 65 60 55 55 50 50 50 45 40 37 33 30 28 25 25 23 20 19 18 17 16 14 14 12 MAX. DYNAMIC IMPEDANCE (Note 3) ZZT @ IZT OHMS 2.0 1.5 1.2 1.1 1.0 1.1 1.2 1.3 1.2 1.3 1.5 2.0 3 3 3 3 3 3 4 4 4 4 4 5 5 6 7 8 9 10 11 12 13 14 15 15 15 16 17 18 22 25 35 40 45 55 75 100 125 175 200 250 260 300 ZZK @ 1mA (IZK) OHMS 400 400 500 550 600 750 500 250 500 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 300 300 300 300 400 400 400 500 500 500 500 600 600 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1750 1850 2000 MAX. DC ZENER CURRENT o (IZM) @ 75 C Stud Temp. (Note 4) TYPICAL TEMP. COEFF. VZ mA 2380 2130 1940 1780 1620 1460 1330 1210 1320 1180 1040 960 860 780 720 660 600 560 530 500 460 440 420 380 350 310 300 280 260 230 210 195 185 175 165 160 160 150 130 120 110 100 85 80 75 72 67 62 58 54 50 46 45 40 %/ C -.046 -.033 -.015 +/-.010 +.030 +.049 +.040 +.045 .040 .045 .048 .051 .055 .060 .065 .065 .070 .070 .070 .075 .075 .075 .075 .080 .080 .080 .085 .085 .085 .085 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .095 .095 .095 .095 .095 .095 .095 .095 .095 .100 *JEDEC Registered Data. **Not JEDEC Data. Have JAN and JANTX Qualifications to MIL-PRF-19500/124. Copyright 2003 11-12-2003 REV A o MAX** REVERSE CURRENT IR @ VR A 100 100 50 10 10 10 10 10 150 100 50 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Volts 0.5 0.5 1.0 1.0 1.0 2.0 2.0 3.0 5.2 5.7 6.2 6.9 7.6 8.4 9.1 9.9 10.5 11.4 12.2 13.0 13.7 14.0 15.2 16.7 18.2 18.2 20.6 22.8 25.1 27.4 29.7 32.7 33.0 35.8 36.0 38.8 39.0 42.6 47.1 51.7 56.0 62.2 69.2 76.0 76.0 83.6 91.2 98.8 100.0 114.0 121.6 135.0 136.8 152.0 POLARITY STD. POLARITY CATHODE TO STUD STD. POLARITY ANODE TO STUD 1N2970 - 1N3015B 1N3993 - 1N4000A JEDEC TYPE NO. (Note 1) NOMINAL ZENER VOLTAGE VZ @ IZT (Note 2) See further notes on following page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS @ 30oC Case Temperature Page 2 1N2970 thru 1N3015B and 1N3993 thru 1N4000A 10 WATT ZENER DIODES SCOTTSDALE DIVISION NOTES: 1. 4. Pd Rated Power Dissipation - Watts GRAPHS FIGURE 1 Power Derating Curve o Stud Temperature ( C) FIGURE 3 Typical Zener Impedance vs. Zener Current For Types Shown Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 1N2970 - 1N3015B 1N3993 - 1N4000A FIGURE 2 Typical Zener Impedance vs. Zener Current For Types Shown Copyright 2003 11-12-2003 REV A WWW . Microsemi .C OM 2. 3. 1N3993 - 1N4000 series: suffix A indicates +/-5% tolerance, no suffix indicates +/-10% tolerance. 1N2970 - 1N3015 series: suffix B indicates +/- 5% tolerance, suffix A indicates +/-10%, no suffix indicates +/-20% tolerance. If tighter tolerance is required, consult factory. o The electrical characteristics are measured after allowing the device to stabilize for 90 seconds with 30 C Base temperature. The zener impedance (ZZT) is derived from the 60 Hz ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. When making zener impedance measurements at the IZK test point, it may be necessary to insert a 60 Hz band pass filter between the diode and voltmeter to avoid errors resulting from low level noise signals. A curve showing the variation of zener impedance vs. zener current for three representative types is shown in Figures 2 and 3. Also see Microsemi MicroNote 202. These values of IZM may be exceeded in the case of individual diodes. The values shown are calculated for the worst case that is a unit of +/-5% tolerance at the high voltage end of its tolerance range. Allowance has also been made for the rise in zener voltage above VZT, which results from zener impedance and the increase in junction temperature as power dissipation approaches 10 watts. 1N2970 thru 1N3015B and 1N3993 thru 1N4000A 10 WATT ZENER DIODES SCOTTSDALE DIVISION WWW . Microsemi .C OM PACKAGE DIMENSIONS 10-32 UNF-2A (MOD) PITCH DIA. MIN. .1658 MAX. .1697 TO WITHSTAND A TORQUE UP TO 30 IN-LB. WHEN NUT IS TIGHTENED ON STUD All dimensions in: INCH mm 1N2970 - 1N3015B 1N3993 - 1N4000A Copyright 2003 11-12-2003 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4