ECL www.vishay.com Vishay Roederstein Aluminum Capacitors FEATURES * Load life: 2000 h at 105 C * Extra low impedance, high ripple current * Polarized SMD aluminum electrolytic capacitors, non solid electrolyte * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION APPLICATIONS VALUE Nominal case size (O D x L in mm ) * SMD technology, for high mounting density * Industrial and professional applications 6 x 5.8 to 12.5 x 13.5 Rated capacitance range CR Capacitance tolerance * General industrial, consumer 10 F to 1500 F * Smoothing, filtering, buffering 20 % Rated voltage range 6.3 V to 50 V Category temperature range Load life PACKAGING -40 C to 105 C Supplied in blister tape. 2000 h Based on sectional specification IEC 60384-4 / EN 130300 Climatic category IEC 60068 40 / 105 / 56 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (O D x L in mm) CR (F) RATED VOLTAGE (V) 6.3 10 16 25 35 50 10 6.3 x 5.8 22 6.3 x 5.8 33 6.3 x 5.8 8 x 6.2 47 6.3 x 5.8 8 x 6.2 68 6.3 x 5.8 8 x 6.2 8 x 10 100 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 220 6.3 x 5.8 6.3 x 7.7 8 x 6.2 8 x 10 10 x 10 - 330 8 x 6.2 8 x 10 - - - 470 8 x 10 10 x 10 - - - 680 10 x 10 - - - - 1000 10 x 10 - - - - - 1500 10 x 10 - - - - - Revision: 15-Jul-16 Document Number: 25020 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ECL www.vishay.com Vishay Roederstein DIMENSIONS in millimeters CASE SIZE CODE D L A B C E R N P AD 6.3 0.5 5.8 0.3 2.4 0.2 6.6 0.2 6.6 0.2 2.2 0.2 0.5 to 0.8 0.3 0.5 BM 6.3 0.5 7.7 0.4 2.4 0.2 6.6 0.2 6.6 0.2 2.2 0.2 0.5 to 0.8 0.3 0.5 AE 8 0.5 6.2 0.4 3.3 0.2 8.3 0.2 8.3 0.2 2.3 0.2 0.5 to 0.8 0.3 0.5 AF 8 0.5 10 0.5 2.9 0.2 8.3 0.2 8.3 0.2 3.1 0.2 0.8 to 1.1 0.3 0.5 AG 10 0.5 10 0.5 3.2 0.2 10.3 0.2 10.3 0.2 4.5 0.2 0.8 to 1.1 0.3 0.5 AH 12.5 0.5 13.5 0.5 4.6 0.2 12.8 0.2 12.8 0.2 4.5 0.2 1.1 to 1.4 0.3 0.5 Capacitance N max. Plastic plateform C + Positive P max. A E A Voltage B Lot no. OD 22 A 50 + L - Negative ORDERING EXAMPLE ELECTRICAL DATA SYMBOL R ECL 22 F / 50 V, 20 %, size 6.3 x 5.8 mm DESCRIPTION Ordering code: MALSECL00AD222HARK UR Rated voltage CR Rated capacitance at 120 Hz tan Max. dissipation factor at 120 Hz RESR Max. equivalent series resistance at 120 Hz IR Rated alternating current at 120 Hz and upper category temperature Z Max. impedance at 100 kHz For Standard Packaging Quantity (SPQ) and Minimum Order Quantity (MOQ) please refer to our price list or contact customer service. Note * Unless otherwise specified, all electrical values apply at Tamb = 20 C, P = 86 to 100 kPa, RH = 45 to 75 %. ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 Z 100 kHz / 20 C () IR 100 kHz / 105 C (mA) CR 120 Hz (F) DIMENSIONS DxL (mm) 220 6.3 x 5.8 0.24 0.44 330 8 x 6.2 0.24 0.26 1000 10 x 10 0.24 0.09 1500 10 x 10 0.24 220 6.3 x 7.7 0.19 470 8 x 10 680 10 x 10 100 6.3 x 5.8 0.16 0.44 220 8 x 6.2 0.16 0.26 330 8 x 10 0.16 0.17 450 1.00 MALSECL00AF333DARK 470 10 x 10 0.16 0.09 670 1.21 MALSECL00AG347DARK Revision: 15-Jul-16 tan 120 Hz WEIGHT (g) CATALOG NUMBER 230 0.30 MALSECL00AD322BARK 300 0.55 MALSECL00AE333BARK 670 1.21 MALSECL00AG410BARK 0.09 670 1.21 MALSECL00AG415BARK 0.34 280 0.40 MALSECL00BM322CARK 0.19 0.17 450 1.00 MALSECL00AF347CARK 0.19 0.09 670 1.21 MALSECL00AG368CARK 230 0.30 MALSECL00AD310DARK 300 0.55 MALSECL00AE322DARK Document Number: 25020 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ECL www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 25 35 50 CR 120 Hz (F) DIMENSIONS DxL (mm) tan 120 Hz Z 100 kHz / 20 C () IR 100 kHz / 105 C (mA) WEIGHT (g) CATALOG NUMBER 68 100 220 33 47 68 100 220 10 22 33 47 68 100 6.3 x 5.8 8 x 6.2 8 x 10 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 6.2 8 x 10 10 x 10 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.44 0.26 0.17 0.44 0.44 0.26 0.17 0.09 0.88 0.88 0.63 0.63 0.34 0.18 230 300 450 230 230 300 450 670 165 165 300 300 450 670 0.30 0.55 1.00 0.30 0.30 0.55 1.00 1.21 0.30 0.30 0.55 0.55 1.00 1.21 MALSECL00AD268EARK MALSECL00AE310EARK MALSECL00AF322EARK MALSECL00AD233FARK MALSECL00AD247FARK MALSECL00AE268FARK MALSECL00AF310FARK MALSECL00AG322FARK MALSECL00AD210HARK MALSECL00AD222HARK MALSECL00AE233HARK MALSECL00AE247HARK MALSECL00AF268HARK MALSECL00AG310HARK REFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS tP TP Critical Zone TL to TP Temperature Ramp-up TL tL Ts max. Ts min. Ramp-down ts Preheat t 25 C to Peak Time PROFILE FEATURE Average ramp-up rate (TL to TP) Preheat Temperature min. (Ts min.) Temperature max. (Ts max.) Time (Ts min. to Ts max.) Ts max. to TL Ramp-up rate Time maintained above Temperature (TL) Time (tL) Peak / classification temperature (TP) Time within 5 C of actual peak temperature (TP) Ramp-down rate Time 25 C to peak temperature Revision: 15-Jul-16 O 4 TO O 10 3 C/s max. 150 C 200 C 60 s to 150 s SOLDERING CONDITION O 12.5 3 C/s max. O 16 150 C 200 C 40 s to 120 s 40 s to 100 s 3 C/s max. 3 C/s max. 217 C 60 s to 90 s 250 C 10 s max. 3 C/s max. 8 min max. 217 C 40 s to 60 s 240 C 230 C 10 s max. 3 C/s max. 8 min max. Document Number: 25020 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ECL www.vishay.com Vishay Roederstein RESISTANCE TO SOLDERING HEAT Leakage current Less than specified value Capacitance value Within 10 % of initial value tan Less than specified value LOW TEMPERATURE BEHAVIOR (at 120 Hz) IMPEDANCE RATIO (Z) T2/(Z) T1 RATED VOLTAGE (V) T2/T1 6.3 10 16 25 35 50 63 100 -25 C / +20 C 2 2 2 2 2 2 3 3 -40 C / +20 C 3 3 3 3 3 3 4 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) IR MULTIPLIER 50 0.41 120 0.59 300 0.69 1000 0.80 10 000 0.88 100 000 1.00 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Current Leakage current (test conditions: UR, 20 C) After 2 min at UR IL2 0.01 x CR x UR or 3 A for UR 100 V (whichever is greater) Resistance Equivalent series resistance (ESR) Calculated from tan max. ESR = tan /2 f CR TEST PROCEDURES AND REQUIREMENTS TEST PROCEDURE (quick reference) REQUIREMENTS Load life Tamb = 105 C UR and IR applied After 2000 h C/C: 25 % of initial value IL spec. limit tan 2 x spec. limit Shelf life No voltage applied After 1000 h After test: UR to be applied for 30 min 24 h to 48 h before measurement C/C: 25 % of initial value IL spec. limit tan 2 x spec. limit Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 15-Jul-16 Document Number: 25020 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000